Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) BPF debugger and asm tool by Daniel Borkmann.

 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.

 3) Correct reciprocal_divide and update users, from Hannes Frederic
    Sowa and Daniel Borkmann.

 4) Currently we only have a "set" operation for the hw timestamp socket
    ioctl, add a "get" operation to match.  From Ben Hutchings.

 5) Add better trace events for debugging driver datapath problems, also
    from Ben Hutchings.

 6) Implement auto corking in TCP, from Eric Dumazet.  Basically, if we
    have a small send and a previous packet is already in the qdisc or
    device queue, defer until TX completion or we get more data.

 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.

 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
    Borkmann.

 9) Share IP header compression code between Bluetooth and IEEE802154
    layers, from Jukka Rissanen.

10) Fix ipv6 router reachability probing, from Jiri Benc.

11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.

12) Support tunneling in GRO layer, from Jerry Chu.

13) Allow bonding to be configured fully using netlink, from Scott
    Feldman.

14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
    already get the TCI.  From Atzm Watanabe.

15) New "Heavy Hitter" qdisc, from Terry Lam.

16) Significantly improve the IPSEC support in pktgen, from Fan Du.

17) Allow ipv4 tunnels to cache routes, just like sockets.  From Tom
    Herbert.

18) Add Proportional Integral Enhanced packet scheduler, from Vijay
    Subramanian.

19) Allow openvswitch to mmap'd netlink, from Thomas Graf.

20) Key TCP metrics blobs also by source address, not just destination
    address.  From Christoph Paasch.

21) Support 10G in generic phylib.  From Andy Fleming.

22) Try to short-circuit GRO flow compares using device provided RX
    hash, if provided.  From Tom Herbert.

The wireless and netfilter folks have been busy little bees too.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
  net/cxgb4: Fix referencing freed adapter
  ipv6: reallocate addrconf router for ipv6 address when lo device up
  fib_frontend: fix possible NULL pointer dereference
  rtnetlink: remove IFLA_BOND_SLAVE definition
  rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
  qlcnic: update version to 5.3.55
  qlcnic: Enhance logic to calculate msix vectors.
  qlcnic: Refactor interrupt coalescing code for all adapters.
  qlcnic: Update poll controller code path
  qlcnic: Interrupt code cleanup
  qlcnic: Enhance Tx timeout debugging.
  qlcnic: Use bool for rx_mac_learn.
  bonding: fix u64 division
  rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
  sfc: Use the correct maximum TX DMA ring size for SFC9100
  Add Shradha Shah as the sfc driver maintainer.
  net/vxlan: Share RX skb de-marking and checksum checks with ovs
  tulip: cleanup by using ARRAY_SIZE()
  ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
  net/cxgb4: Don't retrieve stats during recovery
  ...

1 files changed, 927 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq.c b/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
new file mode 100644
index 000000000000..5470ce95936e
--- /dev/null
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
@@ -0,0 +1,927 @@
+/*******************************************************************************
+ *
+ * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
+ * Copyright(c) 2013 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
+
+#include "i40e_status.h"
+#include "i40e_type.h"
+#include "i40e_register.h"
+#include "i40e_adminq.h"
+#include "i40e_prototype.h"
+
+/**
+ *  i40e_adminq_init_regs - Initialize AdminQ registers
+ *  @hw: pointer to the hardware structure
+ *
+ *  This assumes the alloc_asq and alloc_arq functions have already been called
+ **/
+static void i40e_adminq_init_regs(struct i40e_hw *hw)
+{
+	/* set head and tail registers in our local struct */
+	if (hw->mac.type == I40E_MAC_VF) {
+		hw->aq.asq.tail = I40E_VF_ATQT1;
+		hw->aq.asq.head = I40E_VF_ATQH1;
+		hw->aq.asq.len  = I40E_VF_ATQLEN1;
+		hw->aq.arq.tail = I40E_VF_ARQT1;
+		hw->aq.arq.head = I40E_VF_ARQH1;
+		hw->aq.arq.len  = I40E_VF_ARQLEN1;
+	} else {
+		hw->aq.asq.tail = I40E_PF_ATQT;
+		hw->aq.asq.head = I40E_PF_ATQH;
+		hw->aq.asq.len  = I40E_PF_ATQLEN;
+		hw->aq.arq.tail = I40E_PF_ARQT;
+		hw->aq.arq.head = I40E_PF_ARQH;
+		hw->aq.arq.len  = I40E_PF_ARQLEN;
+	}
+}
+
+/**
+ *  i40e_alloc_adminq_asq_ring - Allocate Admin Queue send rings
+ *  @hw: pointer to the hardware structure
+ **/
+static i40e_status i40e_alloc_adminq_asq_ring(struct i40e_hw *hw)
+{
+	i40e_status ret_code;
+
+	ret_code = i40e_allocate_dma_mem(hw, &hw->aq.asq.desc_buf,
+					 i40e_mem_atq_ring,
+					 (hw->aq.num_asq_entries *
+					 sizeof(struct i40e_aq_desc)),
+					 I40E_ADMINQ_DESC_ALIGNMENT);
+	if (ret_code)
+		return ret_code;
+
+	ret_code = i40e_allocate_virt_mem(hw, &hw->aq.asq.cmd_buf,
+					  (hw->aq.num_asq_entries *
+					  sizeof(struct i40e_asq_cmd_details)));
+	if (ret_code) {
+		i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf);
+		return ret_code;
+	}
+
+	return ret_code;
+}
+
+/**
+ *  i40e_alloc_adminq_arq_ring - Allocate Admin Queue receive rings
+ *  @hw: pointer to the hardware structure
+ **/
+static i40e_status i40e_alloc_adminq_arq_ring(struct i40e_hw *hw)
+{
+	i40e_status ret_code;
+
+	ret_code = i40e_allocate_dma_mem(hw, &hw->aq.arq.desc_buf,
+					 i40e_mem_arq_ring,
+					 (hw->aq.num_arq_entries *
+					 sizeof(struct i40e_aq_desc)),
+					 I40E_ADMINQ_DESC_ALIGNMENT);
+
+	return ret_code;
+}
+
+/**
+ *  i40e_free_adminq_asq - Free Admin Queue send rings
+ *  @hw: pointer to the hardware structure
+ *
+ *  This assumes the posted send buffers have already been cleaned
+ *  and de-allocated
+ **/
+static void i40e_free_adminq_asq(struct i40e_hw *hw)
+{
+	i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf);
+}
+
+/**
+ *  i40e_free_adminq_arq - Free Admin Queue receive rings
+ *  @hw: pointer to the hardware structure
+ *
+ *  This assumes the posted receive buffers have already been cleaned
+ *  and de-allocated
+ **/
+static void i40e_free_adminq_arq(struct i40e_hw *hw)
+{
+	i40e_free_dma_mem(hw, &hw->aq.arq.desc_buf);
+}
+
+/**
+ *  i40e_alloc_arq_bufs - Allocate pre-posted buffers for the receive queue
+ *  @hw: pointer to the hardware structure
+ **/
+static i40e_status i40e_alloc_arq_bufs(struct i40e_hw *hw)
+{
+	i40e_status ret_code;
+	struct i40e_aq_desc *desc;
+	struct i40e_dma_mem *bi;
+	int i;
+
+	/* We'll be allocating the buffer info memory first, then we can
+	 * allocate the mapped buffers for the event processing
+	 */
+
+	/* buffer_info structures do not need alignment */
+	ret_code = i40e_allocate_virt_mem(hw, &hw->aq.arq.dma_head,
+		(hw->aq.num_arq_entries * sizeof(struct i40e_dma_mem)));
+	if (ret_code)
+		goto alloc_arq_bufs;
+	hw->aq.arq.r.arq_bi = (struct i40e_dma_mem *)hw->aq.arq.dma_head.va;
+
+	/* allocate the mapped buffers */
+	for (i = 0; i < hw->aq.num_arq_entries; i++) {
+		bi = &hw->aq.arq.r.arq_bi[i];
+		ret_code = i40e_allocate_dma_mem(hw, bi,
+						 i40e_mem_arq_buf,
+						 hw->aq.arq_buf_size,
+						 I40E_ADMINQ_DESC_ALIGNMENT);
+		if (ret_code)
+			goto unwind_alloc_arq_bufs;
+
+		/* now configure the descriptors for use */
+		desc = I40E_ADMINQ_DESC(hw->aq.arq, i);
+
+		desc->flags = cpu_to_le16(I40E_AQ_FLAG_BUF);
+		if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF)
+			desc->flags |= cpu_to_le16(I40E_AQ_FLAG_LB);
+		desc->opcode = 0;
+		/* This is in accordance with Admin queue design, there is no
+		 * register for buffer size configuration
+		 */
+		desc->datalen = cpu_to_le16((u16)bi->size);
+		desc->retval = 0;
+		desc->cookie_high = 0;
+		desc->cookie_low = 0;
+		desc->params.external.addr_high =
+			cpu_to_le32(upper_32_bits(bi->pa));
+		desc->params.external.addr_low =
+			cpu_to_le32(lower_32_bits(bi->pa));
+		desc->params.external.param0 = 0;
+		desc->params.external.param1 = 0;
+	}
+
+alloc_arq_bufs:
+	return ret_code;
+
+unwind_alloc_arq_bufs:
+	/* don't try to free the one that failed... */
+	i--;
+	for (; i >= 0; i--)
+		i40e_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]);
+	i40e_free_virt_mem(hw, &hw->aq.arq.dma_head);
+
+	return ret_code;
+}
+
+/**
+ *  i40e_alloc_asq_bufs - Allocate empty buffer structs for the send queue
+ *  @hw: pointer to the hardware structure
+ **/
+static i40e_status i40e_alloc_asq_bufs(struct i40e_hw *hw)
+{
+	i40e_status ret_code;
+	struct i40e_dma_mem *bi;
+	int i;
+
+	/* No mapped memory needed yet, just the buffer info structures */
+	ret_code = i40e_allocate_virt_mem(hw, &hw->aq.asq.dma_head,
+		(hw->aq.num_asq_entries * sizeof(struct i40e_dma_mem)));
+	if (ret_code)
+		goto alloc_asq_bufs;
+	hw->aq.asq.r.asq_bi = (struct i40e_dma_mem *)hw->aq.asq.dma_head.va;
+
+	/* allocate the mapped buffers */
+	for (i = 0; i < hw->aq.num_asq_entries; i++) {
+		bi = &hw->aq.asq.r.asq_bi[i];
+		ret_code = i40e_allocate_dma_mem(hw, bi,
+						 i40e_mem_asq_buf,
+						 hw->aq.asq_buf_size,
+						 I40E_ADMINQ_DESC_ALIGNMENT);
+		if (ret_code)
+			goto unwind_alloc_asq_bufs;
+	}
+alloc_asq_bufs:
+	return ret_code;
+
+unwind_alloc_asq_bufs:
+	/* don't try to free the one that failed... */
+	i--;
+	for (; i >= 0; i--)
+		i40e_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]);
+	i40e_free_virt_mem(hw, &hw->aq.asq.dma_head);
+
+	return ret_code;
+}
+
+/**
+ *  i40e_free_arq_bufs - Free receive queue buffer info elements
+ *  @hw: pointer to the hardware structure
+ **/
+static void i40e_free_arq_bufs(struct i40e_hw *hw)
+{
+	int i;
+
+	/* free descriptors */
+	for (i = 0; i < hw->aq.num_arq_entries; i++)
+		i40e_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]);
+
+	/* free the descriptor memory */
+	i40e_free_dma_mem(hw, &hw->aq.arq.desc_buf);
+
+	/* free the dma header */
+	i40e_free_virt_mem(hw, &hw->aq.arq.dma_head);
+}
+
+/**
+ *  i40e_free_asq_bufs - Free send queue buffer info elements
+ *  @hw: pointer to the hardware structure
+ **/
+static void i40e_free_asq_bufs(struct i40e_hw *hw)
+{
+	int i;
+
+	/* only unmap if the address is non-NULL */
+	for (i = 0; i < hw->aq.num_asq_entries; i++)
+		if (hw->aq.asq.r.asq_bi[i].pa)
+			i40e_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]);
+
+	/* free the buffer info list */
+	i40e_free_virt_mem(hw, &hw->aq.asq.cmd_buf);
+
+	/* free the descriptor memory */
+	i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf);
+
+	/* free the dma header */
+	i40e_free_virt_mem(hw, &hw->aq.asq.dma_head);
+}
+
+/**
+ *  i40e_config_asq_regs - configure ASQ registers
+ *  @hw: pointer to the hardware structure
+ *
+ *  Configure base address and length registers for the transmit queue
+ **/
+static void i40e_config_asq_regs(struct i40e_hw *hw)
+{
+	if (hw->mac.type == I40E_MAC_VF) {
+		/* configure the transmit queue */
+		wr32(hw, I40E_VF_ATQBAH1,
+		    upper_32_bits(hw->aq.asq.desc_buf.pa));
+		wr32(hw, I40E_VF_ATQBAL1,
+		    lower_32_bits(hw->aq.asq.desc_buf.pa));
+		wr32(hw, I40E_VF_ATQLEN1, (hw->aq.num_asq_entries |
+					  I40E_VF_ATQLEN1_ATQENABLE_MASK));
+	} else {
+		/* configure the transmit queue */
+		wr32(hw, I40E_PF_ATQBAH,
+		    upper_32_bits(hw->aq.asq.desc_buf.pa));
+		wr32(hw, I40E_PF_ATQBAL,
+		    lower_32_bits(hw->aq.asq.desc_buf.pa));
+		wr32(hw, I40E_PF_ATQLEN, (hw->aq.num_asq_entries |
+					  I40E_PF_ATQLEN_ATQENABLE_MASK));
+	}
+}
+
+/**
+ *  i40e_config_arq_regs - ARQ register configuration
+ *  @hw: pointer to the hardware structure
+ *
+ * Configure base address and length registers for the receive (event queue)
+ **/
+static void i40e_config_arq_regs(struct i40e_hw *hw)
+{
+	if (hw->mac.type == I40E_MAC_VF) {
+		/* configure the receive queue */
+		wr32(hw, I40E_VF_ARQBAH1,
+		    upper_32_bits(hw->aq.arq.desc_buf.pa));
+		wr32(hw, I40E_VF_ARQBAL1,
+		    lower_32_bits(hw->aq.arq.desc_buf.pa));
+		wr32(hw, I40E_VF_ARQLEN1, (hw->aq.num_arq_entries |
+					  I40E_VF_ARQLEN1_ARQENABLE_MASK));
+	} else {
+		/* configure the receive queue */
+		wr32(hw, I40E_PF_ARQBAH,
+		    upper_32_bits(hw->aq.arq.desc_buf.pa));
+		wr32(hw, I40E_PF_ARQBAL,
+		    lower_32_bits(hw->aq.arq.desc_buf.pa));
+		wr32(hw, I40E_PF_ARQLEN, (hw->aq.num_arq_entries |
+					  I40E_PF_ARQLEN_ARQENABLE_MASK));
+	}
+
+	/* Update tail in the HW to post pre-allocated buffers */
+	wr32(hw, hw->aq.arq.tail, hw->aq.num_arq_entries - 1);
+}
+
+/**
+ *  i40e_init_asq - main initialization routine for ASQ
+ *  @hw: pointer to the hardware structure
+ *
+ *  This is the main initialization routine for the Admin Send Queue
+ *  Prior to calling this function, drivers *MUST* set the following fields
+ *  in the hw->aq structure:
+ *     - hw->aq.num_asq_entries
+ *     - hw->aq.arq_buf_size
+ *
+ *  Do *NOT* hold the lock when calling this as the memory allocation routines
+ *  called are not going to be atomic context safe
+ **/
+static i40e_status i40e_init_asq(struct i40e_hw *hw)
+{
+	i40e_status ret_code = 0;
+
+	if (hw->aq.asq.count > 0) {
+		/* queue already initialized */
+		ret_code = I40E_ERR_NOT_READY;
+		goto init_adminq_exit;
+	}
+
+	/* verify input for valid configuration */
+	if ((hw->aq.num_asq_entries == 0) ||
+	    (hw->aq.asq_buf_size == 0)) {
+		ret_code = I40E_ERR_CONFIG;
+		goto init_adminq_exit;
+	}
+
+	hw->aq.asq.next_to_use = 0;
+	hw->aq.asq.next_to_clean = 0;
+	hw->aq.asq.count = hw->aq.num_asq_entries;
+
+	/* allocate the ring memory */
+	ret_code = i40e_alloc_adminq_asq_ring(hw);
+	if (ret_code)
+		goto init_adminq_exit;
+
+	/* allocate buffers in the rings */
+	ret_code = i40e_alloc_asq_bufs(hw);
+	if (ret_code)
+		goto init_adminq_free_rings;
+
+	/* initialize base registers */
+	i40e_config_asq_regs(hw);
+
+	/* success! */
+	goto init_adminq_exit;
+
+init_adminq_free_rings:
+	i40e_free_adminq_asq(hw);
+
+init_adminq_exit:
+	return ret_code;
+}
+
+/**
+ *  i40e_init_arq - initialize ARQ
+ *  @hw: pointer to the hardware structure
+ *
+ *  The main initialization routine for the Admin Receive (Event) Queue.
+ *  Prior to calling this function, drivers *MUST* set the following fields
+ *  in the hw->aq structure:
+ *     - hw->aq.num_asq_entries
+ *     - hw->aq.arq_buf_size
+ *
+ *  Do *NOT* hold the lock when calling this as the memory allocation routines
+ *  called are not going to be atomic context safe
+ **/
+static i40e_status i40e_init_arq(struct i40e_hw *hw)
+{
+	i40e_status ret_code = 0;
+
+	if (hw->aq.arq.count > 0) {
+		/* queue already initialized */
+		ret_code = I40E_ERR_NOT_READY;
+		goto init_adminq_exit;
+	}
+
+	/* verify input for valid configuration */
+	if ((hw->aq.num_arq_entries == 0) ||
+	    (hw->aq.arq_buf_size == 0)) {
+		ret_code = I40E_ERR_CONFIG;
+		goto init_adminq_exit;
+	}
+
+	hw->aq.arq.next_to_use = 0;
+	hw->aq.arq.next_to_clean = 0;
+	hw->aq.arq.count = hw->aq.num_arq_entries;
+
+	/* allocate the ring memory */
+	ret_code = i40e_alloc_adminq_arq_ring(hw);
+	if (ret_code)
+		goto init_adminq_exit;
+
+	/* allocate buffers in the rings */
+	ret_code = i40e_alloc_arq_bufs(hw);
+	if (ret_code)
+		goto init_adminq_free_rings;
+
+	/* initialize base registers */
+	i40e_config_arq_regs(hw);
+
+	/* success! */
+	goto init_adminq_exit;
+
+init_adminq_free_rings:
+	i40e_free_adminq_arq(hw);
+
+init_adminq_exit:
+	return ret_code;
+}
+
+/**
+ *  i40e_shutdown_asq - shutdown the ASQ
+ *  @hw: pointer to the hardware structure
+ *
+ *  The main shutdown routine for the Admin Send Queue
+ **/
+static i40e_status i40e_shutdown_asq(struct i40e_hw *hw)
+{
+	i40e_status ret_code = 0;
+
+	if (hw->aq.asq.count == 0)
+		return I40E_ERR_NOT_READY;
+
+	/* Stop firmware AdminQ processing */
+	wr32(hw, hw->aq.asq.head, 0);
+	wr32(hw, hw->aq.asq.tail, 0);
+	wr32(hw, hw->aq.asq.len, 0);
+
+	/* make sure lock is available */
+	mutex_lock(&hw->aq.asq_mutex);
+
+	hw->aq.asq.count = 0; /* to indicate uninitialized queue */
+
+	/* free ring buffers */
+	i40e_free_asq_bufs(hw);
+
+	mutex_unlock(&hw->aq.asq_mutex);
+
+	return ret_code;
+}
+
+/**
+ *  i40e_shutdown_arq - shutdown ARQ
+ *  @hw: pointer to the hardware structure
+ *
+ *  The main shutdown routine for the Admin Receive Queue
+ **/
+static i40e_status i40e_shutdown_arq(struct i40e_hw *hw)
+{
+	i40e_status ret_code = 0;
+
+	if (hw->aq.arq.count == 0)
+		return I40E_ERR_NOT_READY;
+
+	/* Stop firmware AdminQ processing */
+	wr32(hw, hw->aq.arq.head, 0);
+	wr32(hw, hw->aq.arq.tail, 0);
+	wr32(hw, hw->aq.arq.len, 0);
+
+	/* make sure lock is available */
+	mutex_lock(&hw->aq.arq_mutex);
+
+	hw->aq.arq.count = 0; /* to indicate uninitialized queue */
+
+	/* free ring buffers */
+	i40e_free_arq_bufs(hw);
+
+	mutex_unlock(&hw->aq.arq_mutex);
+
+	return ret_code;
+}
+
+/**
+ *  i40evf_init_adminq - main initialization routine for Admin Queue
+ *  @hw: pointer to the hardware structure
+ *
+ *  Prior to calling this function, drivers *MUST* set the following fields
+ *  in the hw->aq structure:
+ *     - hw->aq.num_asq_entries
+ *     - hw->aq.num_arq_entries
+ *     - hw->aq.arq_buf_size
+ *     - hw->aq.asq_buf_size
+ **/
+i40e_status i40evf_init_adminq(struct i40e_hw *hw)
+{
+	i40e_status ret_code;
+
+	/* verify input for valid configuration */
+	if ((hw->aq.num_arq_entries == 0) ||
+	    (hw->aq.num_asq_entries == 0) ||
+	    (hw->aq.arq_buf_size == 0) ||
+	    (hw->aq.asq_buf_size == 0)) {
+		ret_code = I40E_ERR_CONFIG;
+		goto init_adminq_exit;
+	}
+
+	/* initialize locks */
+	mutex_init(&hw->aq.asq_mutex);
+	mutex_init(&hw->aq.arq_mutex);
+
+	/* Set up register offsets */
+	i40e_adminq_init_regs(hw);
+
+	/* allocate the ASQ */
+	ret_code = i40e_init_asq(hw);
+	if (ret_code)
+		goto init_adminq_destroy_locks;
+
+	/* allocate the ARQ */
+	ret_code = i40e_init_arq(hw);
+	if (ret_code)
+		goto init_adminq_free_asq;
+
+	/* success! */
+	goto init_adminq_exit;
+
+init_adminq_free_asq:
+	i40e_shutdown_asq(hw);
+init_adminq_destroy_locks:
+
+init_adminq_exit:
+	return ret_code;
+}
+
+/**
+ *  i40evf_shutdown_adminq - shutdown routine for the Admin Queue
+ *  @hw: pointer to the hardware structure
+ **/
+i40e_status i40evf_shutdown_adminq(struct i40e_hw *hw)
+{
+	i40e_status ret_code = 0;
+
+	if (i40evf_check_asq_alive(hw))
+		i40evf_aq_queue_shutdown(hw, true);
+
+	i40e_shutdown_asq(hw);
+	i40e_shutdown_arq(hw);
+
+	/* destroy the locks */
+
+	return ret_code;
+}
+
+/**
+ *  i40e_clean_asq - cleans Admin send queue
+ *  @hw: pointer to the hardware structure
+ *
+ *  returns the number of free desc
+ **/
+static u16 i40e_clean_asq(struct i40e_hw *hw)
+{
+	struct i40e_adminq_ring *asq = &(hw->aq.asq);
+	struct i40e_asq_cmd_details *details;
+	u16 ntc = asq->next_to_clean;
+	struct i40e_aq_desc desc_cb;
+	struct i40e_aq_desc *desc;
+
+	desc = I40E_ADMINQ_DESC(*asq, ntc);
+	details = I40E_ADMINQ_DETAILS(*asq, ntc);
+	while (rd32(hw, hw->aq.asq.head) != ntc) {
+		if (details->callback) {
+			I40E_ADMINQ_CALLBACK cb_func =
+					(I40E_ADMINQ_CALLBACK)details->callback;
+			desc_cb = *desc;
+			cb_func(hw, &desc_cb);
+		}
+		memset((void *)desc, 0, sizeof(struct i40e_aq_desc));
+		memset((void *)details, 0,
+		       sizeof(struct i40e_asq_cmd_details));
+		ntc++;
+		if (ntc == asq->count)
+			ntc = 0;
+		desc = I40E_ADMINQ_DESC(*asq, ntc);
+		details = I40E_ADMINQ_DETAILS(*asq, ntc);
+	}
+
+	asq->next_to_clean = ntc;
+
+	return I40E_DESC_UNUSED(asq);
+}
+
+/**
+ *  i40evf_asq_done - check if FW has processed the Admin Send Queue
+ *  @hw: pointer to the hw struct
+ *
+ *  Returns true if the firmware has processed all descriptors on the
+ *  admin send queue. Returns false if there are still requests pending.
+ **/
+bool i40evf_asq_done(struct i40e_hw *hw)
+{
+	/* AQ designers suggest use of head for better
+	 * timing reliability than DD bit
+	 */
+	return rd32(hw, hw->aq.asq.head) == hw->aq.asq.next_to_use;
+
+}
+
+/**
+ *  i40evf_asq_send_command - send command to Admin Queue
+ *  @hw: pointer to the hw struct
+ *  @desc: prefilled descriptor describing the command (non DMA mem)
+ *  @buff: buffer to use for indirect commands
+ *  @buff_size: size of buffer for indirect commands
+ *  @cmd_details: pointer to command details structure
+ *
+ *  This is the main send command driver routine for the Admin Queue send
+ *  queue.  It runs the queue, cleans the queue, etc
+ **/
+i40e_status i40evf_asq_send_command(struct i40e_hw *hw,
+				struct i40e_aq_desc *desc,
+				void *buff, /* can be NULL */
+				u16  buff_size,
+				struct i40e_asq_cmd_details *cmd_details)
+{
+	i40e_status status = 0;
+	struct i40e_dma_mem *dma_buff = NULL;
+	struct i40e_asq_cmd_details *details;
+	struct i40e_aq_desc *desc_on_ring;
+	bool cmd_completed = false;
+	u16  retval = 0;
+
+	if (hw->aq.asq.count == 0) {
+		i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
+			   "AQTX: Admin queue not initialized.\n");
+		status = I40E_ERR_QUEUE_EMPTY;
+		goto asq_send_command_exit;
+	}
+
+	details = I40E_ADMINQ_DETAILS(hw->aq.asq, hw->aq.asq.next_to_use);
+	if (cmd_details) {
+		*details = *cmd_details;
+
+		/* If the cmd_details are defined copy the cookie.  The
+		 * cpu_to_le32 is not needed here because the data is ignored
+		 * by the FW, only used by the driver
+		 */
+		if (details->cookie) {
+			desc->cookie_high =
+				cpu_to_le32(upper_32_bits(details->cookie));
+			desc->cookie_low =
+				cpu_to_le32(lower_32_bits(details->cookie));
+		}
+	} else {
+		memset(details, 0, sizeof(struct i40e_asq_cmd_details));
+	}
+
+	/* clear requested flags and then set additional flags if defined */
+	desc->flags &= ~cpu_to_le16(details->flags_dis);
+	desc->flags |= cpu_to_le16(details->flags_ena);
+
+	mutex_lock(&hw->aq.asq_mutex);
+
+	if (buff_size > hw->aq.asq_buf_size) {
+		i40e_debug(hw,
+			   I40E_DEBUG_AQ_MESSAGE,
+			   "AQTX: Invalid buffer size: %d.\n",
+			   buff_size);
+		status = I40E_ERR_INVALID_SIZE;
+		goto asq_send_command_error;
+	}
+
+	if (details->postpone && !details->async) {
+		i40e_debug(hw,
+			   I40E_DEBUG_AQ_MESSAGE,
+			   "AQTX: Async flag not set along with postpone flag");
+		status = I40E_ERR_PARAM;
+		goto asq_send_command_error;
+	}
+
+	/* call clean and check queue available function to reclaim the
+	 * descriptors that were processed by FW, the function returns the
+	 * number of desc available
+	 */
+	/* the clean function called here could be called in a separate thread
+	 * in case of asynchronous completions
+	 */
+	if (i40e_clean_asq(hw) == 0) {
+		i40e_debug(hw,
+			   I40E_DEBUG_AQ_MESSAGE,
+			   "AQTX: Error queue is full.\n");
+		status = I40E_ERR_ADMIN_QUEUE_FULL;
+		goto asq_send_command_error;
+	}
+
+	/* initialize the temp desc pointer with the right desc */
+	desc_on_ring = I40E_ADMINQ_DESC(hw->aq.asq, hw->aq.asq.next_to_use);
+
+	/* if the desc is available copy the temp desc to the right place */
+	*desc_on_ring = *desc;
+
+	/* if buff is not NULL assume indirect command */
+	if (buff != NULL) {
+		dma_buff = &(hw->aq.asq.r.asq_bi[hw->aq.asq.next_to_use]);
+		/* copy the user buff into the respective DMA buff */
+		memcpy(dma_buff->va, buff, buff_size);
+		desc_on_ring->datalen = cpu_to_le16(buff_size);
+
+		/* Update the address values in the desc with the pa value
+		 * for respective buffer
+		 */
+		desc_on_ring->params.external.addr_high =
+				cpu_to_le32(upper_32_bits(dma_buff->pa));
+		desc_on_ring->params.external.addr_low =
+				cpu_to_le32(lower_32_bits(dma_buff->pa));
+	}
+
+	/* bump the tail */
+	i40evf_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring, buff);
+	(hw->aq.asq.next_to_use)++;
+	if (hw->aq.asq.next_to_use == hw->aq.asq.count)
+		hw->aq.asq.next_to_use = 0;
+	if (!details->postpone)
+		wr32(hw, hw->aq.asq.tail, hw->aq.asq.next_to_use);
+
+	/* if cmd_details are not defined or async flag is not set,
+	 * we need to wait for desc write back
+	 */
+	if (!details->async && !details->postpone) {
+		u32 total_delay = 0;
+		u32 delay_len = 10;
+
+		do {
+			/* AQ designers suggest use of head for better
+			 * timing reliability than DD bit
+			 */
+			if (i40evf_asq_done(hw))
+				break;
+			/* ugh! delay while spin_lock */
+			udelay(delay_len);
+			total_delay += delay_len;
+		} while (total_delay <  I40E_ASQ_CMD_TIMEOUT);
+	}
+
+	/* if ready, copy the desc back to temp */
+	if (i40evf_asq_done(hw)) {
+		*desc = *desc_on_ring;
+		if (buff != NULL)
+			memcpy(buff, dma_buff->va, buff_size);
+		retval = le16_to_cpu(desc->retval);
+		if (retval != 0) {
+			i40e_debug(hw,
+				   I40E_DEBUG_AQ_MESSAGE,
+				   "AQTX: Command completed with error 0x%X.\n",
+				   retval);
+			/* strip off FW internal code */
+			retval &= 0xff;
+		}
+		cmd_completed = true;
+		if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_OK)
+			status = 0;
+		else
+			status = I40E_ERR_ADMIN_QUEUE_ERROR;
+		hw->aq.asq_last_status = (enum i40e_admin_queue_err)retval;
+	}
+
+	/* update the error if time out occurred */
+	if ((!cmd_completed) &&
+	    (!details->async && !details->postpone)) {
+		i40e_debug(hw,
+			   I40E_DEBUG_AQ_MESSAGE,
+			   "AQTX: Writeback timeout.\n");
+		status = I40E_ERR_ADMIN_QUEUE_TIMEOUT;
+	}
+
+asq_send_command_error:
+	mutex_unlock(&hw->aq.asq_mutex);
+asq_send_command_exit:
+	return status;
+}
+
+/**
+ *  i40evf_fill_default_direct_cmd_desc - AQ descriptor helper function
+ *  @desc:     pointer to the temp descriptor (non DMA mem)
+ *  @opcode:   the opcode can be used to decide which flags to turn off or on
+ *
+ *  Fill the desc with default values
+ **/
+void i40evf_fill_default_direct_cmd_desc(struct i40e_aq_desc *desc,
+				       u16 opcode)
+{
+	/* zero out the desc */
+	memset((void *)desc, 0, sizeof(struct i40e_aq_desc));
+	desc->opcode = cpu_to_le16(opcode);
+	desc->flags = cpu_to_le16(I40E_AQ_FLAG_SI);
+}
+
+/**
+ *  i40evf_clean_arq_element
+ *  @hw: pointer to the hw struct
+ *  @e: event info from the receive descriptor, includes any buffers
+ *  @pending: number of events that could be left to process
+ *
+ *  This function cleans one Admin Receive Queue element and returns
+ *  the contents through e.  It can also return how many events are
+ *  left to process through 'pending'
+ **/
+i40e_status i40evf_clean_arq_element(struct i40e_hw *hw,
+					     struct i40e_arq_event_info *e,
+					     u16 *pending)
+{
+	i40e_status ret_code = 0;
+	u16 ntc = hw->aq.arq.next_to_clean;
+	struct i40e_aq_desc *desc;
+	struct i40e_dma_mem *bi;
+	u16 desc_idx;
+	u16 datalen;
+	u16 flags;
+	u16 ntu;
+
+	/* take the lock before we start messing with the ring */
+	mutex_lock(&hw->aq.arq_mutex);
+
+	/* set next_to_use to head */
+	ntu = (rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK);
+	if (ntu == ntc) {
+		/* nothing to do - shouldn't need to update ring's values */
+		i40e_debug(hw,
+			   I40E_DEBUG_AQ_MESSAGE,
+			   "AQRX: Queue is empty.\n");
+		ret_code = I40E_ERR_ADMIN_QUEUE_NO_WORK;
+		goto clean_arq_element_out;
+	}
+
+	/* now clean the next descriptor */
+	desc = I40E_ADMINQ_DESC(hw->aq.arq, ntc);
+	desc_idx = ntc;
+	i40evf_debug_aq(hw,
+		      I40E_DEBUG_AQ_COMMAND,
+		      (void *)desc,
+		      hw->aq.arq.r.arq_bi[desc_idx].va);
+
+	flags = le16_to_cpu(desc->flags);
+	if (flags & I40E_AQ_FLAG_ERR) {
+		ret_code = I40E_ERR_ADMIN_QUEUE_ERROR;
+		hw->aq.arq_last_status =
+			(enum i40e_admin_queue_err)le16_to_cpu(desc->retval);
+		i40e_debug(hw,
+			   I40E_DEBUG_AQ_MESSAGE,
+			   "AQRX: Event received with error 0x%X.\n",
+			   hw->aq.arq_last_status);
+	} else {
+		e->desc = *desc;
+		datalen = le16_to_cpu(desc->datalen);
+		e->msg_size = min(datalen, e->msg_size);
+		if (e->msg_buf != NULL && (e->msg_size != 0))
+			memcpy(e->msg_buf, hw->aq.arq.r.arq_bi[desc_idx].va,
+			       e->msg_size);
+	}
+
+	/* Restore the original datalen and buffer address in the desc,
+	 * FW updates datalen to indicate the event message
+	 * size
+	 */
+	bi = &hw->aq.arq.r.arq_bi[ntc];
+	memset((void *)desc, 0, sizeof(struct i40e_aq_desc));
+
+	desc->flags = cpu_to_le16(I40E_AQ_FLAG_BUF);
+	if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF)
+		desc->flags |= cpu_to_le16(I40E_AQ_FLAG_LB);
+	desc->datalen = cpu_to_le16((u16)bi->size);
+	desc->params.external.addr_high = cpu_to_le32(upper_32_bits(bi->pa));
+	desc->params.external.addr_low = cpu_to_le32(lower_32_bits(bi->pa));
+
+	/* set tail = the last cleaned desc index. */
+	wr32(hw, hw->aq.arq.tail, ntc);
+	/* ntc is updated to tail + 1 */
+	ntc++;
+	if (ntc == hw->aq.num_arq_entries)
+		ntc = 0;
+	hw->aq.arq.next_to_clean = ntc;
+	hw->aq.arq.next_to_use = ntu;
+
+clean_arq_element_out:
+	/* Set pending if needed, unlock and return */
+	if (pending != NULL)
+		*pending = (ntc > ntu ? hw->aq.arq.count : 0) + (ntu - ntc);
+	mutex_unlock(&hw->aq.arq_mutex);
+
+	return ret_code;
+}
+
+void i40evf_resume_aq(struct i40e_hw *hw)
+{
+	/* Registers are reset after PF reset */
+	hw->aq.asq.next_to_use = 0;
+	hw->aq.asq.next_to_clean = 0;
+
+	i40e_config_asq_regs(hw);
+
+	hw->aq.arq.next_to_use = 0;
+	hw->aq.arq.next_to_clean = 0;
+
+	i40e_config_arq_regs(hw);
+}