summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-05-18 02:26:30 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2016-05-18 02:26:30 +0300
commita7fd20d1c476af4563e66865213474a2f9f473a4 (patch)
treefb1399e2f82842450245fb058a8fb23c52865f43 /drivers/net/ethernet/intel/fm10k/fm10k_pf.c
parentb80fed9595513384424cd141923c9161c4b5021b (diff)
parent917fa5353da05e8a0045b8acacba8d50400d5b12 (diff)
downloadlinux-a7fd20d1c476af4563e66865213474a2f9f473a4.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ...
Diffstat (limited to 'drivers/net/ethernet/intel/fm10k/fm10k_pf.c')
-rw-r--r--drivers/net/ethernet/intel/fm10k/fm10k_pf.c141
1 files changed, 26 insertions, 115 deletions
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
index 8cf943db5662..dc75507c9926 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
@@ -1,5 +1,5 @@
-/* Intel Ethernet Switch Host Interface Driver
- * Copyright(c) 2013 - 2015 Intel Corporation.
+/* Intel(R) Ethernet Switch Host Interface Driver
+ * Copyright(c) 2013 - 2016 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -219,8 +219,8 @@ static s32 fm10k_update_vlan_pf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set)
/* VLAN multi-bit write:
* The multi-bit write has several parts to it.
- * 3 2 1 0
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * 24 16 8 0
+ * 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | RSVD0 | Length |C|RSVD0| VLAN ID |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
@@ -488,6 +488,10 @@ static s32 fm10k_update_lport_state_pf(struct fm10k_hw *hw, u16 glort,
if (!fm10k_glort_valid_pf(hw, glort))
return FM10K_ERR_PARAM;
+ /* reset multicast mode if deleting lport */
+ if (!enable)
+ fm10k_update_xcast_mode_pf(hw, glort, FM10K_XCAST_MODE_NONE);
+
/* construct the lport message from the 2 pieces of data we have */
lport_msg = ((u32)count << 16) | glort;
@@ -527,8 +531,8 @@ static s32 fm10k_configure_dglort_map_pf(struct fm10k_hw *hw,
return FM10K_ERR_PARAM;
/* determine count of VSIs and queues */
- queue_count = 1 << (dglort->rss_l + dglort->pc_l);
- vsi_count = 1 << (dglort->vsi_l + dglort->queue_l);
+ queue_count = BIT(dglort->rss_l + dglort->pc_l);
+ vsi_count = BIT(dglort->vsi_l + dglort->queue_l);
glort = dglort->glort;
q_idx = dglort->queue_b;
@@ -544,8 +548,8 @@ static s32 fm10k_configure_dglort_map_pf(struct fm10k_hw *hw,
}
/* determine count of PCs and queues */
- queue_count = 1 << (dglort->queue_l + dglort->rss_l + dglort->vsi_l);
- pc_count = 1 << dglort->pc_l;
+ queue_count = BIT(dglort->queue_l + dglort->rss_l + dglort->vsi_l);
+ pc_count = BIT(dglort->pc_l);
/* configure PC for Tx queues */
for (pc = 0; pc < pc_count; pc++) {
@@ -711,8 +715,8 @@ static s32 fm10k_iov_assign_resources_pf(struct fm10k_hw *hw, u16 num_vfs,
FM10K_RXDCTL_WRITE_BACK_MIN_DELAY |
FM10K_RXDCTL_DROP_ON_EMPTY);
fm10k_write_reg(hw, FM10K_RXQCTL(vf_q_idx),
- FM10K_RXQCTL_VF |
- (i << FM10K_RXQCTL_VF_SHIFT));
+ (i << FM10K_RXQCTL_VF_SHIFT) |
+ FM10K_RXQCTL_VF);
/* map queue pair to VF */
fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx);
@@ -864,9 +868,13 @@ static s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw,
fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), 0);
fm10k_write_reg(hw, FM10K_TXDCTL(vf_q_idx), 0);
- /* determine correct default VLAN ID */
+ /* Determine correct default VLAN ID. The FM10K_VLAN_OVERRIDE bit is
+ * used here to indicate to the VF that it will not have privilege to
+ * write VLAN_TABLE. All policy is enforced on the PF but this allows
+ * the VF to correctly report errors to userspace rqeuests.
+ */
if (vf_info->pf_vid)
- vf_vid = vf_info->pf_vid | FM10K_VLAN_CLEAR;
+ vf_vid = vf_info->pf_vid | FM10K_VLAN_OVERRIDE;
else
vf_vid = vf_info->sw_vid;
@@ -952,7 +960,7 @@ static s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw,
return FM10K_ERR_PARAM;
/* clear event notification of VF FLR */
- fm10k_write_reg(hw, FM10K_PFVFLREC(vf_idx / 32), 1 << (vf_idx % 32));
+ fm10k_write_reg(hw, FM10K_PFVFLREC(vf_idx / 32), BIT(vf_idx % 32));
/* force timeout and then disconnect the mailbox */
vf_info->mbx.timeout = 0;
@@ -987,7 +995,7 @@ static s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw,
txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) |
(vf_idx << FM10K_TXQCTL_TC_SHIFT) |
FM10K_TXQCTL_VF | vf_idx;
- rxqctl = FM10K_RXQCTL_VF | (vf_idx << FM10K_RXQCTL_VF_SHIFT);
+ rxqctl = (vf_idx << FM10K_RXQCTL_VF_SHIFT) | FM10K_RXQCTL_VF;
/* stop further DMA and reset queue ownership back to VF */
for (i = vf_q_idx; i < (queues_per_pool + vf_q_idx); i++) {
@@ -1140,19 +1148,6 @@ static void fm10k_iov_update_stats_pf(struct fm10k_hw *hw,
fm10k_update_hw_stats_q(hw, q, idx, qpp);
}
-static s32 fm10k_iov_report_timestamp_pf(struct fm10k_hw *hw,
- struct fm10k_vf_info *vf_info,
- u64 timestamp)
-{
- u32 msg[4];
-
- /* generate port state response to notify VF it is not ready */
- fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_1588);
- fm10k_tlv_attr_put_u64(msg, FM10K_1588_MSG_TIMESTAMP, timestamp);
-
- return vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg);
-}
-
/**
* fm10k_iov_msg_msix_pf - Message handler for MSI-X request from VF
* @hw: Pointer to hardware structure
@@ -1384,7 +1379,7 @@ s32 fm10k_iov_msg_lport_state_pf(struct fm10k_hw *hw, u32 **results,
mode = fm10k_iov_supported_xcast_mode_pf(vf_info, mode);
/* if mode is not currently enabled, enable it */
- if (!(FM10K_VF_FLAG_ENABLED(vf_info) & (1 << mode)))
+ if (!(FM10K_VF_FLAG_ENABLED(vf_info) & BIT(mode)))
fm10k_update_xcast_mode_pf(hw, vf_info->glort, mode);
/* swap mode back to a bit flag */
@@ -1618,7 +1613,7 @@ static s32 fm10k_request_lport_map_pf(struct fm10k_hw *hw)
* @hw: pointer to hardware structure
* @switch_ready: pointer to boolean value that will record switch state
*
- * This funciton will check the DMA_CTRL2 register and mailbox in order
+ * This function will check the DMA_CTRL2 register and mailbox in order
* to determine if the switch is ready for the PF to begin requesting
* addresses and mapping traffic to the local interface.
**/
@@ -1647,6 +1642,8 @@ out:
/* This structure defines the attibutes to be parsed below */
const struct fm10k_tlv_attr fm10k_lport_map_msg_attr[] = {
+ FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_ERR,
+ sizeof(struct fm10k_swapi_error)),
FM10K_TLV_ATTR_U32(FM10K_PF_ATTR_ID_LPORT_MAP),
FM10K_TLV_ATTR_LAST
};
@@ -1787,89 +1784,6 @@ s32 fm10k_msg_err_pf(struct fm10k_hw *hw, u32 **results,
return 0;
}
-const struct fm10k_tlv_attr fm10k_1588_timestamp_msg_attr[] = {
- FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_1588_TIMESTAMP,
- sizeof(struct fm10k_swapi_1588_timestamp)),
- FM10K_TLV_ATTR_LAST
-};
-
-/* currently there is no shared 1588 timestamp handler */
-
-/**
- * fm10k_adjust_systime_pf - Adjust systime frequency
- * @hw: pointer to hardware structure
- * @ppb: adjustment rate in parts per billion
- *
- * This function will adjust the SYSTIME_CFG register contained in BAR 4
- * if this function is supported for BAR 4 access. The adjustment amount
- * is based on the parts per billion value provided and adjusted to a
- * value based on parts per 2^48 clock cycles.
- *
- * If adjustment is not supported or the requested value is too large
- * we will return an error.
- **/
-static s32 fm10k_adjust_systime_pf(struct fm10k_hw *hw, s32 ppb)
-{
- u64 systime_adjust;
-
- /* if sw_addr is not set we don't have switch register access */
- if (!hw->sw_addr)
- return ppb ? FM10K_ERR_PARAM : 0;
-
- /* we must convert the value from parts per billion to parts per
- * 2^48 cycles. In addition I have opted to only use the 30 most
- * significant bits of the adjustment value as the 8 least
- * significant bits are located in another register and represent
- * a value significantly less than a part per billion, the result
- * of dropping the 8 least significant bits is that the adjustment
- * value is effectively multiplied by 2^8 when we write it.
- *
- * As a result of all this the math for this breaks down as follows:
- * ppb / 10^9 == adjust * 2^8 / 2^48
- * If we solve this for adjust, and simplify it comes out as:
- * ppb * 2^31 / 5^9 == adjust
- */
- systime_adjust = (ppb < 0) ? -ppb : ppb;
- systime_adjust <<= 31;
- do_div(systime_adjust, 1953125);
-
- /* verify the requested adjustment value is in range */
- if (systime_adjust > FM10K_SW_SYSTIME_ADJUST_MASK)
- return FM10K_ERR_PARAM;
-
- if (ppb > 0)
- systime_adjust |= FM10K_SW_SYSTIME_ADJUST_DIR_POSITIVE;
-
- fm10k_write_sw_reg(hw, FM10K_SW_SYSTIME_ADJUST, (u32)systime_adjust);
-
- return 0;
-}
-
-/**
- * fm10k_read_systime_pf - Reads value of systime registers
- * @hw: pointer to the hardware structure
- *
- * Function reads the content of 2 registers, combined to represent a 64 bit
- * value measured in nanosecods. In order to guarantee the value is accurate
- * we check the 32 most significant bits both before and after reading the
- * 32 least significant bits to verify they didn't change as we were reading
- * the registers.
- **/
-static u64 fm10k_read_systime_pf(struct fm10k_hw *hw)
-{
- u32 systime_l, systime_h, systime_tmp;
-
- systime_h = fm10k_read_reg(hw, FM10K_SYSTIME + 1);
-
- do {
- systime_tmp = systime_h;
- systime_l = fm10k_read_reg(hw, FM10K_SYSTIME);
- systime_h = fm10k_read_reg(hw, FM10K_SYSTIME + 1);
- } while (systime_tmp != systime_h);
-
- return ((u64)systime_h << 32) | systime_l;
-}
-
static const struct fm10k_msg_data fm10k_msg_data_pf[] = {
FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf),
FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf),
@@ -1899,8 +1813,6 @@ static const struct fm10k_mac_ops mac_ops_pf = {
.set_dma_mask = fm10k_set_dma_mask_pf,
.get_fault = fm10k_get_fault_pf,
.get_host_state = fm10k_get_host_state_pf,
- .adjust_systime = fm10k_adjust_systime_pf,
- .read_systime = fm10k_read_systime_pf,
};
static const struct fm10k_iov_ops iov_ops_pf = {
@@ -1912,7 +1824,6 @@ static const struct fm10k_iov_ops iov_ops_pf = {
.set_lport = fm10k_iov_set_lport_pf,
.reset_lport = fm10k_iov_reset_lport_pf,
.update_stats = fm10k_iov_update_stats_pf,
- .report_timestamp = fm10k_iov_report_timestamp_pf,
};
static s32 fm10k_get_invariants_pf(struct fm10k_hw *hw)