diff options
| author | Lendacky, Thomas <Thomas.Lendacky@amd.com> | 2017-03-01 00:03:01 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2017-03-02 23:57:53 +0300 |
| commit | b42c6761fd1651f564491b53016046c9ebf0b2a9 (patch) | |
| tree | bce13cb8d957386bf17989162e522eeb5bf896e9 /drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | |
| parent | 402168b4c2dc0734b8fbd282eff77da0275c5129 (diff) | |
| download | linux-b42c6761fd1651f564491b53016046c9ebf0b2a9.tar.xz | |
amd-xgbe: Be sure to set MDIO modes on device (re)start
The MDIO register mode is set when the device is probed. But when the
device is brought down and then back up, the MDIO register mode has been
reset. Be sure to reset the mode during device startup and only change
the mode of the address specified.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c')
| -rw-r--r-- | drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 22 |
1 files changed, 22 insertions, 0 deletions
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c index 9d8c953083b4..04804cbb7dc1 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c @@ -875,6 +875,16 @@ static int xgbe_phy_find_phy_device(struct xgbe_prv_data *pdata) !phy_data->sfp_phy_avail) return 0; + /* Set the proper MDIO mode for the PHY */ + ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->mdio_addr, + phy_data->phydev_mode); + if (ret) { + netdev_err(pdata->netdev, + "mdio port/clause not compatible (%u/%u)\n", + phy_data->mdio_addr, phy_data->phydev_mode); + return ret; + } + /* Create and connect to the PHY device */ phydev = get_phy_device(phy_data->mii, phy_data->mdio_addr, (phy_data->phydev_mode == XGBE_MDIO_MODE_CL45)); @@ -2722,6 +2732,18 @@ static int xgbe_phy_start(struct xgbe_prv_data *pdata) if (ret) return ret; + /* Set the proper MDIO mode for the re-driver */ + if (phy_data->redrv && !phy_data->redrv_if) { + ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->redrv_addr, + XGBE_MDIO_MODE_CL22); + if (ret) { + netdev_err(pdata->netdev, + "redriver mdio port not compatible (%u)\n", + phy_data->redrv_addr); + return ret; + } + } + /* Start in highest supported mode */ xgbe_phy_set_mode(pdata, phy_data->start_mode); |