intel: Move the Intel wired LAN drivers

Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and
the necessary Kconfig and Makefile changes.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 2692 deletions

diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
deleted file mode 100644
index 7898a67d6505..000000000000
--- a/drivers/net/e1000e/lib.c
+++ /dev/null
@@ -1,2692 +0,0 @@
-/*******************************************************************************
-
-  Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2011 Intel Corporation.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Contact Information:
-  Linux NICS <linux.nics@intel.com>
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "e1000.h"
-
-enum e1000_mng_mode {
-	e1000_mng_mode_none = 0,
-	e1000_mng_mode_asf,
-	e1000_mng_mode_pt,
-	e1000_mng_mode_ipmi,
-	e1000_mng_mode_host_if_only
-};
-
-#define E1000_FACTPS_MNGCG		0x20000000
-
-/* Intel(R) Active Management Technology signature */
-#define E1000_IAMT_SIGNATURE		0x544D4149
-
-/**
- *  e1000e_get_bus_info_pcie - Get PCIe bus information
- *  @hw: pointer to the HW structure
- *
- *  Determines and stores the system bus information for a particular
- *  network interface.  The following bus information is determined and stored:
- *  bus speed, bus width, type (PCIe), and PCIe function.
- **/
-s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	struct e1000_bus_info *bus = &hw->bus;
-	struct e1000_adapter *adapter = hw->adapter;
-	u16 pcie_link_status, cap_offset;
-
-	cap_offset = adapter->pdev->pcie_cap;
-	if (!cap_offset) {
-		bus->width = e1000_bus_width_unknown;
-	} else {
-		pci_read_config_word(adapter->pdev,
-				     cap_offset + PCIE_LINK_STATUS,
-				     &pcie_link_status);
-		bus->width = (enum e1000_bus_width)((pcie_link_status &
-						     PCIE_LINK_WIDTH_MASK) >>
-						    PCIE_LINK_WIDTH_SHIFT);
-	}
-
-	mac->ops.set_lan_id(hw);
-
-	return 0;
-}
-
-/**
- *  e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
- *
- *  @hw: pointer to the HW structure
- *
- *  Determines the LAN function id by reading memory-mapped registers
- *  and swaps the port value if requested.
- **/
-void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw)
-{
-	struct e1000_bus_info *bus = &hw->bus;
-	u32 reg;
-
-	/*
-	 * The status register reports the correct function number
-	 * for the device regardless of function swap state.
-	 */
-	reg = er32(STATUS);
-	bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
-}
-
-/**
- *  e1000_set_lan_id_single_port - Set LAN id for a single port device
- *  @hw: pointer to the HW structure
- *
- *  Sets the LAN function id to zero for a single port device.
- **/
-void e1000_set_lan_id_single_port(struct e1000_hw *hw)
-{
-	struct e1000_bus_info *bus = &hw->bus;
-
-	bus->func = 0;
-}
-
-/**
- *  e1000_clear_vfta_generic - Clear VLAN filter table
- *  @hw: pointer to the HW structure
- *
- *  Clears the register array which contains the VLAN filter table by
- *  setting all the values to 0.
- **/
-void e1000_clear_vfta_generic(struct e1000_hw *hw)
-{
-	u32 offset;
-
-	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
-		E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0);
-		e1e_flush();
-	}
-}
-
-/**
- *  e1000_write_vfta_generic - Write value to VLAN filter table
- *  @hw: pointer to the HW structure
- *  @offset: register offset in VLAN filter table
- *  @value: register value written to VLAN filter table
- *
- *  Writes value at the given offset in the register array which stores
- *  the VLAN filter table.
- **/
-void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value)
-{
-	E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value);
-	e1e_flush();
-}
-
-/**
- *  e1000e_init_rx_addrs - Initialize receive address's
- *  @hw: pointer to the HW structure
- *  @rar_count: receive address registers
- *
- *  Setup the receive address registers by setting the base receive address
- *  register to the devices MAC address and clearing all the other receive
- *  address registers to 0.
- **/
-void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
-{
-	u32 i;
-	u8 mac_addr[ETH_ALEN] = {0};
-
-	/* Setup the receive address */
-	e_dbg("Programming MAC Address into RAR[0]\n");
-
-	e1000e_rar_set(hw, hw->mac.addr, 0);
-
-	/* Zero out the other (rar_entry_count - 1) receive addresses */
-	e_dbg("Clearing RAR[1-%u]\n", rar_count-1);
-	for (i = 1; i < rar_count; i++)
-		e1000e_rar_set(hw, mac_addr, i);
-}
-
-/**
- *  e1000_check_alt_mac_addr_generic - Check for alternate MAC addr
- *  @hw: pointer to the HW structure
- *
- *  Checks the nvm for an alternate MAC address.  An alternate MAC address
- *  can be setup by pre-boot software and must be treated like a permanent
- *  address and must override the actual permanent MAC address. If an
- *  alternate MAC address is found it is programmed into RAR0, replacing
- *  the permanent address that was installed into RAR0 by the Si on reset.
- *  This function will return SUCCESS unless it encounters an error while
- *  reading the EEPROM.
- **/
-s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
-{
-	u32 i;
-	s32 ret_val = 0;
-	u16 offset, nvm_alt_mac_addr_offset, nvm_data;
-	u8 alt_mac_addr[ETH_ALEN];
-
-	ret_val = e1000_read_nvm(hw, NVM_COMPAT, 1, &nvm_data);
-	if (ret_val)
-		goto out;
-
-	/* Check for LOM (vs. NIC) or one of two valid mezzanine cards */
-	if (!((nvm_data & NVM_COMPAT_LOM) ||
-	      (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_DUAL) ||
-	      (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)))
-		goto out;
-
-	ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
-	                         &nvm_alt_mac_addr_offset);
-	if (ret_val) {
-		e_dbg("NVM Read Error\n");
-		goto out;
-	}
-
-	if (nvm_alt_mac_addr_offset == 0xFFFF) {
-		/* There is no Alternate MAC Address */
-		goto out;
-	}
-
-	if (hw->bus.func == E1000_FUNC_1)
-		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
-	for (i = 0; i < ETH_ALEN; i += 2) {
-		offset = nvm_alt_mac_addr_offset + (i >> 1);
-		ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
-		if (ret_val) {
-			e_dbg("NVM Read Error\n");
-			goto out;
-		}
-
-		alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
-		alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
-	}
-
-	/* if multicast bit is set, the alternate address will not be used */
-	if (is_multicast_ether_addr(alt_mac_addr)) {
-		e_dbg("Ignoring Alternate Mac Address with MC bit set\n");
-		goto out;
-	}
-
-	/*
-	 * We have a valid alternate MAC address, and we want to treat it the
-	 * same as the normal permanent MAC address stored by the HW into the
-	 * RAR. Do this by mapping this address into RAR0.
-	 */
-	e1000e_rar_set(hw, alt_mac_addr, 0);
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000e_rar_set - Set receive address register
- *  @hw: pointer to the HW structure
- *  @addr: pointer to the receive address
- *  @index: receive address array register
- *
- *  Sets the receive address array register at index to the address passed
- *  in by addr.
- **/
-void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
-{
-	u32 rar_low, rar_high;
-
-	/*
-	 * HW expects these in little endian so we reverse the byte order
-	 * from network order (big endian) to little endian
-	 */
-	rar_low = ((u32) addr[0] |
-		   ((u32) addr[1] << 8) |
-		    ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
-
-	rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
-
-	/* If MAC address zero, no need to set the AV bit */
-	if (rar_low || rar_high)
-		rar_high |= E1000_RAH_AV;
-
-	/*
-	 * Some bridges will combine consecutive 32-bit writes into
-	 * a single burst write, which will malfunction on some parts.
-	 * The flushes avoid this.
-	 */
-	ew32(RAL(index), rar_low);
-	e1e_flush();
-	ew32(RAH(index), rar_high);
-	e1e_flush();
-}
-
-/**
- *  e1000_hash_mc_addr - Generate a multicast hash value
- *  @hw: pointer to the HW structure
- *  @mc_addr: pointer to a multicast address
- *
- *  Generates a multicast address hash value which is used to determine
- *  the multicast filter table array address and new table value.  See
- *  e1000_mta_set_generic()
- **/
-static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
-{
-	u32 hash_value, hash_mask;
-	u8 bit_shift = 0;
-
-	/* Register count multiplied by bits per register */
-	hash_mask = (hw->mac.mta_reg_count * 32) - 1;
-
-	/*
-	 * For a mc_filter_type of 0, bit_shift is the number of left-shifts
-	 * where 0xFF would still fall within the hash mask.
-	 */
-	while (hash_mask >> bit_shift != 0xFF)
-		bit_shift++;
-
-	/*
-	 * The portion of the address that is used for the hash table
-	 * is determined by the mc_filter_type setting.
-	 * The algorithm is such that there is a total of 8 bits of shifting.
-	 * The bit_shift for a mc_filter_type of 0 represents the number of
-	 * left-shifts where the MSB of mc_addr[5] would still fall within
-	 * the hash_mask.  Case 0 does this exactly.  Since there are a total
-	 * of 8 bits of shifting, then mc_addr[4] will shift right the
-	 * remaining number of bits. Thus 8 - bit_shift.  The rest of the
-	 * cases are a variation of this algorithm...essentially raising the
-	 * number of bits to shift mc_addr[5] left, while still keeping the
-	 * 8-bit shifting total.
-	 *
-	 * For example, given the following Destination MAC Address and an
-	 * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
-	 * we can see that the bit_shift for case 0 is 4.  These are the hash
-	 * values resulting from each mc_filter_type...
-	 * [0] [1] [2] [3] [4] [5]
-	 * 01  AA  00  12  34  56
-	 * LSB		 MSB
-	 *
-	 * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
-	 * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
-	 * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
-	 * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
-	 */
-	switch (hw->mac.mc_filter_type) {
-	default:
-	case 0:
-		break;
-	case 1:
-		bit_shift += 1;
-		break;
-	case 2:
-		bit_shift += 2;
-		break;
-	case 3:
-		bit_shift += 4;
-		break;
-	}
-
-	hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
-				  (((u16) mc_addr[5]) << bit_shift)));
-
-	return hash_value;
-}
-
-/**
- *  e1000e_update_mc_addr_list_generic - Update Multicast addresses
- *  @hw: pointer to the HW structure
- *  @mc_addr_list: array of multicast addresses to program
- *  @mc_addr_count: number of multicast addresses to program
- *
- *  Updates entire Multicast Table Array.
- *  The caller must have a packed mc_addr_list of multicast addresses.
- **/
-void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
-					u8 *mc_addr_list, u32 mc_addr_count)
-{
-	u32 hash_value, hash_bit, hash_reg;
-	int i;
-
-	/* clear mta_shadow */
-	memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
-
-	/* update mta_shadow from mc_addr_list */
-	for (i = 0; (u32) i < mc_addr_count; i++) {
-		hash_value = e1000_hash_mc_addr(hw, mc_addr_list);
-
-		hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
-		hash_bit = hash_value & 0x1F;
-
-		hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
-		mc_addr_list += (ETH_ALEN);
-	}
-
-	/* replace the entire MTA table */
-	for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
-		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]);
-	e1e_flush();
-}
-
-/**
- *  e1000e_clear_hw_cntrs_base - Clear base hardware counters
- *  @hw: pointer to the HW structure
- *
- *  Clears the base hardware counters by reading the counter registers.
- **/
-void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw)
-{
-	er32(CRCERRS);
-	er32(SYMERRS);
-	er32(MPC);
-	er32(SCC);
-	er32(ECOL);
-	er32(MCC);
-	er32(LATECOL);
-	er32(COLC);
-	er32(DC);
-	er32(SEC);
-	er32(RLEC);
-	er32(XONRXC);
-	er32(XONTXC);
-	er32(XOFFRXC);
-	er32(XOFFTXC);
-	er32(FCRUC);
-	er32(GPRC);
-	er32(BPRC);
-	er32(MPRC);
-	er32(GPTC);
-	er32(GORCL);
-	er32(GORCH);
-	er32(GOTCL);
-	er32(GOTCH);
-	er32(RNBC);
-	er32(RUC);
-	er32(RFC);
-	er32(ROC);
-	er32(RJC);
-	er32(TORL);
-	er32(TORH);
-	er32(TOTL);
-	er32(TOTH);
-	er32(TPR);
-	er32(TPT);
-	er32(MPTC);
-	er32(BPTC);
-}
-
-/**
- *  e1000e_check_for_copper_link - Check for link (Copper)
- *  @hw: pointer to the HW structure
- *
- *  Checks to see of the link status of the hardware has changed.  If a
- *  change in link status has been detected, then we read the PHY registers
- *  to get the current speed/duplex if link exists.
- **/
-s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	s32 ret_val;
-	bool link;
-
-	/*
-	 * We only want to go out to the PHY registers to see if Auto-Neg
-	 * has completed and/or if our link status has changed.  The
-	 * get_link_status flag is set upon receiving a Link Status
-	 * Change or Rx Sequence Error interrupt.
-	 */
-	if (!mac->get_link_status)
-		return 0;
-
-	/*
-	 * First we want to see if the MII Status Register reports
-	 * link.  If so, then we want to get the current speed/duplex
-	 * of the PHY.
-	 */
-	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
-	if (ret_val)
-		return ret_val;
-
-	if (!link)
-		return ret_val; /* No link detected */
-
-	mac->get_link_status = false;
-
-	/*
-	 * Check if there was DownShift, must be checked
-	 * immediately after link-up
-	 */
-	e1000e_check_downshift(hw);
-
-	/*
-	 * If we are forcing speed/duplex, then we simply return since
-	 * we have already determined whether we have link or not.
-	 */
-	if (!mac->autoneg) {
-		ret_val = -E1000_ERR_CONFIG;
-		return ret_val;
-	}
-
-	/*
-	 * Auto-Neg is enabled.  Auto Speed Detection takes care
-	 * of MAC speed/duplex configuration.  So we only need to
-	 * configure Collision Distance in the MAC.
-	 */
-	e1000e_config_collision_dist(hw);
-
-	/*
-	 * Configure Flow Control now that Auto-Neg has completed.
-	 * First, we need to restore the desired flow control
-	 * settings because we may have had to re-autoneg with a
-	 * different link partner.
-	 */
-	ret_val = e1000e_config_fc_after_link_up(hw);
-	if (ret_val)
-		e_dbg("Error configuring flow control\n");
-
-	return ret_val;
-}
-
-/**
- *  e1000e_check_for_fiber_link - Check for link (Fiber)
- *  @hw: pointer to the HW structure
- *
- *  Checks for link up on the hardware.  If link is not up and we have
- *  a signal, then we need to force link up.
- **/
-s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	u32 rxcw;
-	u32 ctrl;
-	u32 status;
-	s32 ret_val;
-
-	ctrl = er32(CTRL);
-	status = er32(STATUS);
-	rxcw = er32(RXCW);
-
-	/*
-	 * If we don't have link (auto-negotiation failed or link partner
-	 * cannot auto-negotiate), the cable is plugged in (we have signal),
-	 * and our link partner is not trying to auto-negotiate with us (we
-	 * are receiving idles or data), we need to force link up. We also
-	 * need to give auto-negotiation time to complete, in case the cable
-	 * was just plugged in. The autoneg_failed flag does this.
-	 */
-	/* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
-	if ((ctrl & E1000_CTRL_SWDPIN1) && (!(status & E1000_STATUS_LU)) &&
-	    (!(rxcw & E1000_RXCW_C))) {
-		if (mac->autoneg_failed == 0) {
-			mac->autoneg_failed = 1;
-			return 0;
-		}
-		e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
-
-		/* Disable auto-negotiation in the TXCW register */
-		ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
-
-		/* Force link-up and also force full-duplex. */
-		ctrl = er32(CTRL);
-		ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
-		ew32(CTRL, ctrl);
-
-		/* Configure Flow Control after forcing link up. */
-		ret_val = e1000e_config_fc_after_link_up(hw);
-		if (ret_val) {
-			e_dbg("Error configuring flow control\n");
-			return ret_val;
-		}
-	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
-		/*
-		 * If we are forcing link and we are receiving /C/ ordered
-		 * sets, re-enable auto-negotiation in the TXCW register
-		 * and disable forced link in the Device Control register
-		 * in an attempt to auto-negotiate with our link partner.
-		 */
-		e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
-		ew32(TXCW, mac->txcw);
-		ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
-
-		mac->serdes_has_link = true;
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_check_for_serdes_link - Check for link (Serdes)
- *  @hw: pointer to the HW structure
- *
- *  Checks for link up on the hardware.  If link is not up and we have
- *  a signal, then we need to force link up.
- **/
-s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	u32 rxcw;
-	u32 ctrl;
-	u32 status;
-	s32 ret_val;
-
-	ctrl = er32(CTRL);
-	status = er32(STATUS);
-	rxcw = er32(RXCW);
-
-	/*
-	 * If we don't have link (auto-negotiation failed or link partner
-	 * cannot auto-negotiate), and our link partner is not trying to
-	 * auto-negotiate with us (we are receiving idles or data),
-	 * we need to force link up. We also need to give auto-negotiation
-	 * time to complete.
-	 */
-	/* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
-	if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) {
-		if (mac->autoneg_failed == 0) {
-			mac->autoneg_failed = 1;
-			return 0;
-		}
-		e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
-
-		/* Disable auto-negotiation in the TXCW register */
-		ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
-
-		/* Force link-up and also force full-duplex. */
-		ctrl = er32(CTRL);
-		ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
-		ew32(CTRL, ctrl);
-
-		/* Configure Flow Control after forcing link up. */
-		ret_val = e1000e_config_fc_after_link_up(hw);
-		if (ret_val) {
-			e_dbg("Error configuring flow control\n");
-			return ret_val;
-		}
-	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
-		/*
-		 * If we are forcing link and we are receiving /C/ ordered
-		 * sets, re-enable auto-negotiation in the TXCW register
-		 * and disable forced link in the Device Control register
-		 * in an attempt to auto-negotiate with our link partner.
-		 */
-		e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
-		ew32(TXCW, mac->txcw);
-		ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
-
-		mac->serdes_has_link = true;
-	} else if (!(E1000_TXCW_ANE & er32(TXCW))) {
-		/*
-		 * If we force link for non-auto-negotiation switch, check
-		 * link status based on MAC synchronization for internal
-		 * serdes media type.
-		 */
-		/* SYNCH bit and IV bit are sticky. */
-		udelay(10);
-		rxcw = er32(RXCW);
-		if (rxcw & E1000_RXCW_SYNCH) {
-			if (!(rxcw & E1000_RXCW_IV)) {
-				mac->serdes_has_link = true;
-				e_dbg("SERDES: Link up - forced.\n");
-			}
-		} else {
-			mac->serdes_has_link = false;
-			e_dbg("SERDES: Link down - force failed.\n");
-		}
-	}
-
-	if (E1000_TXCW_ANE & er32(TXCW)) {
-		status = er32(STATUS);
-		if (status & E1000_STATUS_LU) {
-			/* SYNCH bit and IV bit are sticky, so reread rxcw.  */
-			udelay(10);
-			rxcw = er32(RXCW);
-			if (rxcw & E1000_RXCW_SYNCH) {
-				if (!(rxcw & E1000_RXCW_IV)) {
-					mac->serdes_has_link = true;
-					e_dbg("SERDES: Link up - autoneg "
-					   "completed successfully.\n");
-				} else {
-					mac->serdes_has_link = false;
-					e_dbg("SERDES: Link down - invalid"
-					   "codewords detected in autoneg.\n");
-				}
-			} else {
-				mac->serdes_has_link = false;
-				e_dbg("SERDES: Link down - no sync.\n");
-			}
-		} else {
-			mac->serdes_has_link = false;
-			e_dbg("SERDES: Link down - autoneg failed\n");
-		}
-	}
-
-	return 0;
-}
-
-/**
- *  e1000_set_default_fc_generic - Set flow control default values
- *  @hw: pointer to the HW structure
- *
- *  Read the EEPROM for the default values for flow control and store the
- *  values.
- **/
-static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
-{
-	s32 ret_val;
-	u16 nvm_data;
-
-	/*
-	 * Read and store word 0x0F of the EEPROM. This word contains bits
-	 * that determine the hardware's default PAUSE (flow control) mode,
-	 * a bit that determines whether the HW defaults to enabling or
-	 * disabling auto-negotiation, and the direction of the
-	 * SW defined pins. If there is no SW over-ride of the flow
-	 * control setting, then the variable hw->fc will
-	 * be initialized based on a value in the EEPROM.
-	 */
-	ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
-
-	if (ret_val) {
-		e_dbg("NVM Read Error\n");
-		return ret_val;
-	}
-
-	if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
-		hw->fc.requested_mode = e1000_fc_none;
-	else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
-		 NVM_WORD0F_ASM_DIR)
-		hw->fc.requested_mode = e1000_fc_tx_pause;
-	else
-		hw->fc.requested_mode = e1000_fc_full;
-
-	return 0;
-}
-
-/**
- *  e1000e_setup_link - Setup flow control and link settings
- *  @hw: pointer to the HW structure
- *
- *  Determines which flow control settings to use, then configures flow
- *  control.  Calls the appropriate media-specific link configuration
- *  function.  Assuming the adapter has a valid link partner, a valid link
- *  should be established.  Assumes the hardware has previously been reset
- *  and the transmitter and receiver are not enabled.
- **/
-s32 e1000e_setup_link(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	s32 ret_val;
-
-	/*
-	 * In the case of the phy reset being blocked, we already have a link.
-	 * We do not need to set it up again.
-	 */
-	if (e1000_check_reset_block(hw))
-		return 0;
-
-	/*
-	 * If requested flow control is set to default, set flow control
-	 * based on the EEPROM flow control settings.
-	 */
-	if (hw->fc.requested_mode == e1000_fc_default) {
-		ret_val = e1000_set_default_fc_generic(hw);
-		if (ret_val)
-			return ret_val;
-	}
-
-	/*
-	 * Save off the requested flow control mode for use later.  Depending
-	 * on the link partner's capabilities, we may or may not use this mode.
-	 */
-	hw->fc.current_mode = hw->fc.requested_mode;
-
-	e_dbg("After fix-ups FlowControl is now = %x\n",
-		hw->fc.current_mode);
-
-	/* Call the necessary media_type subroutine to configure the link. */
-	ret_val = mac->ops.setup_physical_interface(hw);
-	if (ret_val)
-		return ret_val;
-
-	/*
-	 * Initialize the flow control address, type, and PAUSE timer
-	 * registers to their default values.  This is done even if flow
-	 * control is disabled, because it does not hurt anything to
-	 * initialize these registers.
-	 */
-	e_dbg("Initializing the Flow Control address, type and timer regs\n");
-	ew32(FCT, FLOW_CONTROL_TYPE);
-	ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
-	ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
-
-	ew32(FCTTV, hw->fc.pause_time);
-
-	return e1000e_set_fc_watermarks(hw);
-}
-
-/**
- *  e1000_commit_fc_settings_generic - Configure flow control
- *  @hw: pointer to the HW structure
- *
- *  Write the flow control settings to the Transmit Config Word Register (TXCW)
- *  base on the flow control settings in e1000_mac_info.
- **/
-static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	u32 txcw;
-
-	/*
-	 * Check for a software override of the flow control settings, and
-	 * setup the device accordingly.  If auto-negotiation is enabled, then
-	 * software will have to set the "PAUSE" bits to the correct value in
-	 * the Transmit Config Word Register (TXCW) and re-start auto-
-	 * negotiation.  However, if auto-negotiation is disabled, then
-	 * software will have to manually configure the two flow control enable
-	 * bits in the CTRL register.
-	 *
-	 * The possible values of the "fc" parameter are:
-	 *      0:  Flow control is completely disabled
-	 *      1:  Rx flow control is enabled (we can receive pause frames,
-	 *          but not send pause frames).
-	 *      2:  Tx flow control is enabled (we can send pause frames but we
-	 *          do not support receiving pause frames).
-	 *      3:  Both Rx and Tx flow control (symmetric) are enabled.
-	 */
-	switch (hw->fc.current_mode) {
-	case e1000_fc_none:
-		/* Flow control completely disabled by a software over-ride. */
-		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
-		break;
-	case e1000_fc_rx_pause:
-		/*
-		 * Rx Flow control is enabled and Tx Flow control is disabled
-		 * by a software over-ride. Since there really isn't a way to
-		 * advertise that we are capable of Rx Pause ONLY, we will
-		 * advertise that we support both symmetric and asymmetric Rx
-		 * PAUSE.  Later, we will disable the adapter's ability to send
-		 * PAUSE frames.
-		 */
-		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
-		break;
-	case e1000_fc_tx_pause:
-		/*
-		 * Tx Flow control is enabled, and Rx Flow control is disabled,
-		 * by a software over-ride.
-		 */
-		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
-		break;
-	case e1000_fc_full:
-		/*
-		 * Flow control (both Rx and Tx) is enabled by a software
-		 * over-ride.
-		 */
-		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
-		break;
-	default:
-		e_dbg("Flow control param set incorrectly\n");
-		return -E1000_ERR_CONFIG;
-		break;
-	}
-
-	ew32(TXCW, txcw);
-	mac->txcw = txcw;
-
-	return 0;
-}
-
-/**
- *  e1000_poll_fiber_serdes_link_generic - Poll for link up
- *  @hw: pointer to the HW structure
- *
- *  Polls for link up by reading the status register, if link fails to come
- *  up with auto-negotiation, then the link is forced if a signal is detected.
- **/
-static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	u32 i, status;
-	s32 ret_val;
-
-	/*
-	 * If we have a signal (the cable is plugged in, or assumed true for
-	 * serdes media) then poll for a "Link-Up" indication in the Device
-	 * Status Register.  Time-out if a link isn't seen in 500 milliseconds
-	 * seconds (Auto-negotiation should complete in less than 500
-	 * milliseconds even if the other end is doing it in SW).
-	 */
-	for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) {
-		usleep_range(10000, 20000);
-		status = er32(STATUS);
-		if (status & E1000_STATUS_LU)
-			break;
-	}
-	if (i == FIBER_LINK_UP_LIMIT) {
-		e_dbg("Never got a valid link from auto-neg!!!\n");
-		mac->autoneg_failed = 1;
-		/*
-		 * AutoNeg failed to achieve a link, so we'll call
-		 * mac->check_for_link. This routine will force the
-		 * link up if we detect a signal. This will allow us to
-		 * communicate with non-autonegotiating link partners.
-		 */
-		ret_val = mac->ops.check_for_link(hw);
-		if (ret_val) {
-			e_dbg("Error while checking for link\n");
-			return ret_val;
-		}
-		mac->autoneg_failed = 0;
-	} else {
-		mac->autoneg_failed = 0;
-		e_dbg("Valid Link Found\n");
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_setup_fiber_serdes_link - Setup link for fiber/serdes
- *  @hw: pointer to the HW structure
- *
- *  Configures collision distance and flow control for fiber and serdes
- *  links.  Upon successful setup, poll for link.
- **/
-s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
-{
-	u32 ctrl;
-	s32 ret_val;
-
-	ctrl = er32(CTRL);
-
-	/* Take the link out of reset */
-	ctrl &= ~E1000_CTRL_LRST;
-
-	e1000e_config_collision_dist(hw);
-
-	ret_val = e1000_commit_fc_settings_generic(hw);
-	if (ret_val)
-		return ret_val;
-
-	/*
-	 * Since auto-negotiation is enabled, take the link out of reset (the
-	 * link will be in reset, because we previously reset the chip). This
-	 * will restart auto-negotiation.  If auto-negotiation is successful
-	 * then the link-up status bit will be set and the flow control enable
-	 * bits (RFCE and TFCE) will be set according to their negotiated value.
-	 */
-	e_dbg("Auto-negotiation enabled\n");
-
-	ew32(CTRL, ctrl);
-	e1e_flush();
-	usleep_range(1000, 2000);
-
-	/*
-	 * For these adapters, the SW definable pin 1 is set when the optics
-	 * detect a signal.  If we have a signal, then poll for a "Link-Up"
-	 * indication.
-	 */
-	if (hw->phy.media_type == e1000_media_type_internal_serdes ||
-	    (er32(CTRL) & E1000_CTRL_SWDPIN1)) {
-		ret_val = e1000_poll_fiber_serdes_link_generic(hw);
-	} else {
-		e_dbg("No signal detected\n");
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_config_collision_dist - Configure collision distance
- *  @hw: pointer to the HW structure
- *
- *  Configures the collision distance to the default value and is used
- *  during link setup. Currently no func pointer exists and all
- *  implementations are handled in the generic version of this function.
- **/
-void e1000e_config_collision_dist(struct e1000_hw *hw)
-{
-	u32 tctl;
-
-	tctl = er32(TCTL);
-
-	tctl &= ~E1000_TCTL_COLD;
-	tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
-
-	ew32(TCTL, tctl);
-	e1e_flush();
-}
-
-/**
- *  e1000e_set_fc_watermarks - Set flow control high/low watermarks
- *  @hw: pointer to the HW structure
- *
- *  Sets the flow control high/low threshold (watermark) registers.  If
- *  flow control XON frame transmission is enabled, then set XON frame
- *  transmission as well.
- **/
-s32 e1000e_set_fc_watermarks(struct e1000_hw *hw)
-{
-	u32 fcrtl = 0, fcrth = 0;
-
-	/*
-	 * Set the flow control receive threshold registers.  Normally,
-	 * these registers will be set to a default threshold that may be
-	 * adjusted later by the driver's runtime code.  However, if the
-	 * ability to transmit pause frames is not enabled, then these
-	 * registers will be set to 0.
-	 */
-	if (hw->fc.current_mode & e1000_fc_tx_pause) {
-		/*
-		 * We need to set up the Receive Threshold high and low water
-		 * marks as well as (optionally) enabling the transmission of
-		 * XON frames.
-		 */
-		fcrtl = hw->fc.low_water;
-		fcrtl |= E1000_FCRTL_XONE;
-		fcrth = hw->fc.high_water;
-	}
-	ew32(FCRTL, fcrtl);
-	ew32(FCRTH, fcrth);
-
-	return 0;
-}
-
-/**
- *  e1000e_force_mac_fc - Force the MAC's flow control settings
- *  @hw: pointer to the HW structure
- *
- *  Force the MAC's flow control settings.  Sets the TFCE and RFCE bits in the
- *  device control register to reflect the adapter settings.  TFCE and RFCE
- *  need to be explicitly set by software when a copper PHY is used because
- *  autonegotiation is managed by the PHY rather than the MAC.  Software must
- *  also configure these bits when link is forced on a fiber connection.
- **/
-s32 e1000e_force_mac_fc(struct e1000_hw *hw)
-{
-	u32 ctrl;
-
-	ctrl = er32(CTRL);
-
-	/*
-	 * Because we didn't get link via the internal auto-negotiation
-	 * mechanism (we either forced link or we got link via PHY
-	 * auto-neg), we have to manually enable/disable transmit an
-	 * receive flow control.
-	 *
-	 * The "Case" statement below enables/disable flow control
-	 * according to the "hw->fc.current_mode" parameter.
-	 *
-	 * The possible values of the "fc" parameter are:
-	 *      0:  Flow control is completely disabled
-	 *      1:  Rx flow control is enabled (we can receive pause
-	 *          frames but not send pause frames).
-	 *      2:  Tx flow control is enabled (we can send pause frames
-	 *          frames but we do not receive pause frames).
-	 *      3:  Both Rx and Tx flow control (symmetric) is enabled.
-	 *  other:  No other values should be possible at this point.
-	 */
-	e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
-
-	switch (hw->fc.current_mode) {
-	case e1000_fc_none:
-		ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
-		break;
-	case e1000_fc_rx_pause:
-		ctrl &= (~E1000_CTRL_TFCE);
-		ctrl |= E1000_CTRL_RFCE;
-		break;
-	case e1000_fc_tx_pause:
-		ctrl &= (~E1000_CTRL_RFCE);
-		ctrl |= E1000_CTRL_TFCE;
-		break;
-	case e1000_fc_full:
-		ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
-		break;
-	default:
-		e_dbg("Flow control param set incorrectly\n");
-		return -E1000_ERR_CONFIG;
-	}
-
-	ew32(CTRL, ctrl);
-
-	return 0;
-}
-
-/**
- *  e1000e_config_fc_after_link_up - Configures flow control after link
- *  @hw: pointer to the HW structure
- *
- *  Checks the status of auto-negotiation after link up to ensure that the
- *  speed and duplex were not forced.  If the link needed to be forced, then
- *  flow control needs to be forced also.  If auto-negotiation is enabled
- *  and did not fail, then we configure flow control based on our link
- *  partner.
- **/
-s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	s32 ret_val = 0;
-	u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
-	u16 speed, duplex;
-
-	/*
-	 * Check for the case where we have fiber media and auto-neg failed
-	 * so we had to force link.  In this case, we need to force the
-	 * configuration of the MAC to match the "fc" parameter.
-	 */
-	if (mac->autoneg_failed) {
-		if (hw->phy.media_type == e1000_media_type_fiber ||
-		    hw->phy.media_type == e1000_media_type_internal_serdes)
-			ret_val = e1000e_force_mac_fc(hw);
-	} else {
-		if (hw->phy.media_type == e1000_media_type_copper)
-			ret_val = e1000e_force_mac_fc(hw);
-	}
-
-	if (ret_val) {
-		e_dbg("Error forcing flow control settings\n");
-		return ret_val;
-	}
-
-	/*
-	 * Check for the case where we have copper media and auto-neg is
-	 * enabled.  In this case, we need to check and see if Auto-Neg
-	 * has completed, and if so, how the PHY and link partner has
-	 * flow control configured.
-	 */
-	if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
-		/*
-		 * Read the MII Status Register and check to see if AutoNeg
-		 * has completed.  We read this twice because this reg has
-		 * some "sticky" (latched) bits.
-		 */
-		ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg);
-		if (ret_val)
-			return ret_val;
-		ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg);
-		if (ret_val)
-			return ret_val;
-
-		if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
-			e_dbg("Copper PHY and Auto Neg "
-				 "has not completed.\n");
-			return ret_val;
-		}
-
-		/*
-		 * The AutoNeg process has completed, so we now need to
-		 * read both the Auto Negotiation Advertisement
-		 * Register (Address 4) and the Auto_Negotiation Base
-		 * Page Ability Register (Address 5) to determine how
-		 * flow control was negotiated.
-		 */
-		ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg);
-		if (ret_val)
-			return ret_val;
-		ret_val =
-		    e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg);
-		if (ret_val)
-			return ret_val;
-
-		/*
-		 * Two bits in the Auto Negotiation Advertisement Register
-		 * (Address 4) and two bits in the Auto Negotiation Base
-		 * Page Ability Register (Address 5) determine flow control
-		 * for both the PHY and the link partner.  The following
-		 * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
-		 * 1999, describes these PAUSE resolution bits and how flow
-		 * control is determined based upon these settings.
-		 * NOTE:  DC = Don't Care
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
-		 *-------|---------|-------|---------|--------------------
-		 *   0   |    0    |  DC   |   DC    | e1000_fc_none
-		 *   0   |    1    |   0   |   DC    | e1000_fc_none
-		 *   0   |    1    |   1   |    0    | e1000_fc_none
-		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
-		 *   1   |    0    |   0   |   DC    | e1000_fc_none
-		 *   1   |   DC    |   1   |   DC    | e1000_fc_full
-		 *   1   |    1    |   0   |    0    | e1000_fc_none
-		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
-		 *
-		 * Are both PAUSE bits set to 1?  If so, this implies
-		 * Symmetric Flow Control is enabled at both ends.  The
-		 * ASM_DIR bits are irrelevant per the spec.
-		 *
-		 * For Symmetric Flow Control:
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-		 *-------|---------|-------|---------|--------------------
-		 *   1   |   DC    |   1   |   DC    | E1000_fc_full
-		 *
-		 */
-		if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-		    (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
-			/*
-			 * Now we need to check if the user selected Rx ONLY
-			 * of pause frames.  In this case, we had to advertise
-			 * FULL flow control because we could not advertise Rx
-			 * ONLY. Hence, we must now check to see if we need to
-			 * turn OFF the TRANSMISSION of PAUSE frames.
-			 */
-			if (hw->fc.requested_mode == e1000_fc_full) {
-				hw->fc.current_mode = e1000_fc_full;
-				e_dbg("Flow Control = FULL.\r\n");
-			} else {
-				hw->fc.current_mode = e1000_fc_rx_pause;
-				e_dbg("Flow Control = "
-				      "Rx PAUSE frames only.\r\n");
-			}
-		}
-		/*
-		 * For receiving PAUSE frames ONLY.
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-		 *-------|---------|-------|---------|--------------------
-		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
-		 */
-		else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-			  (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
-			  (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
-			  (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
-			hw->fc.current_mode = e1000_fc_tx_pause;
-			e_dbg("Flow Control = Tx PAUSE frames only.\r\n");
-		}
-		/*
-		 * For transmitting PAUSE frames ONLY.
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-		 *-------|---------|-------|---------|--------------------
-		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
-		 */
-		else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-			 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
-			 !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
-			 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
-			hw->fc.current_mode = e1000_fc_rx_pause;
-			e_dbg("Flow Control = Rx PAUSE frames only.\r\n");
-		} else {
-			/*
-			 * Per the IEEE spec, at this point flow control
-			 * should be disabled.
-			 */
-			hw->fc.current_mode = e1000_fc_none;
-			e_dbg("Flow Control = NONE.\r\n");
-		}
-
-		/*
-		 * Now we need to do one last check...  If we auto-
-		 * negotiated to HALF DUPLEX, flow control should not be
-		 * enabled per IEEE 802.3 spec.
-		 */
-		ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);
-		if (ret_val) {
-			e_dbg("Error getting link speed and duplex\n");
-			return ret_val;
-		}
-
-		if (duplex == HALF_DUPLEX)
-			hw->fc.current_mode = e1000_fc_none;
-
-		/*
-		 * Now we call a subroutine to actually force the MAC
-		 * controller to use the correct flow control settings.
-		 */
-		ret_val = e1000e_force_mac_fc(hw);
-		if (ret_val) {
-			e_dbg("Error forcing flow control settings\n");
-			return ret_val;
-		}
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex
- *  @hw: pointer to the HW structure
- *  @speed: stores the current speed
- *  @duplex: stores the current duplex
- *
- *  Read the status register for the current speed/duplex and store the current
- *  speed and duplex for copper connections.
- **/
-s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex)
-{
-	u32 status;
-
-	status = er32(STATUS);
-	if (status & E1000_STATUS_SPEED_1000)
-		*speed = SPEED_1000;
-	else if (status & E1000_STATUS_SPEED_100)
-		*speed = SPEED_100;
-	else
-		*speed = SPEED_10;
-
-	if (status & E1000_STATUS_FD)
-		*duplex = FULL_DUPLEX;
-	else
-		*duplex = HALF_DUPLEX;
-
-	e_dbg("%u Mbps, %s Duplex\n",
-	      *speed == SPEED_1000 ? 1000 : *speed == SPEED_100 ? 100 : 10,
-	      *duplex == FULL_DUPLEX ? "Full" : "Half");
-
-	return 0;
-}
-
-/**
- *  e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex
- *  @hw: pointer to the HW structure
- *  @speed: stores the current speed
- *  @duplex: stores the current duplex
- *
- *  Sets the speed and duplex to gigabit full duplex (the only possible option)
- *  for fiber/serdes links.
- **/
-s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex)
-{
-	*speed = SPEED_1000;
-	*duplex = FULL_DUPLEX;
-
-	return 0;
-}
-
-/**
- *  e1000e_get_hw_semaphore - Acquire hardware semaphore
- *  @hw: pointer to the HW structure
- *
- *  Acquire the HW semaphore to access the PHY or NVM
- **/
-s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
-{
-	u32 swsm;
-	s32 timeout = hw->nvm.word_size + 1;
-	s32 i = 0;
-
-	/* Get the SW semaphore */
-	while (i < timeout) {
-		swsm = er32(SWSM);
-		if (!(swsm & E1000_SWSM_SMBI))
-			break;
-
-		udelay(50);
-		i++;
-	}
-
-	if (i == timeout) {
-		e_dbg("Driver can't access device - SMBI bit is set.\n");
-		return -E1000_ERR_NVM;
-	}
-
-	/* Get the FW semaphore. */
-	for (i = 0; i < timeout; i++) {
-		swsm = er32(SWSM);
-		ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
-
-		/* Semaphore acquired if bit latched */
-		if (er32(SWSM) & E1000_SWSM_SWESMBI)
-			break;
-
-		udelay(50);
-	}
-
-	if (i == timeout) {
-		/* Release semaphores */
-		e1000e_put_hw_semaphore(hw);
-		e_dbg("Driver can't access the NVM\n");
-		return -E1000_ERR_NVM;
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_put_hw_semaphore - Release hardware semaphore
- *  @hw: pointer to the HW structure
- *
- *  Release hardware semaphore used to access the PHY or NVM
- **/
-void e1000e_put_hw_semaphore(struct e1000_hw *hw)
-{
-	u32 swsm;
-
-	swsm = er32(SWSM);
-	swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
-	ew32(SWSM, swsm);
-}
-
-/**
- *  e1000e_get_auto_rd_done - Check for auto read completion
- *  @hw: pointer to the HW structure
- *
- *  Check EEPROM for Auto Read done bit.
- **/
-s32 e1000e_get_auto_rd_done(struct e1000_hw *hw)
-{
-	s32 i = 0;
-
-	while (i < AUTO_READ_DONE_TIMEOUT) {
-		if (er32(EECD) & E1000_EECD_AUTO_RD)
-			break;
-		usleep_range(1000, 2000);
-		i++;
-	}
-
-	if (i == AUTO_READ_DONE_TIMEOUT) {
-		e_dbg("Auto read by HW from NVM has not completed.\n");
-		return -E1000_ERR_RESET;
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_valid_led_default - Verify a valid default LED config
- *  @hw: pointer to the HW structure
- *  @data: pointer to the NVM (EEPROM)
- *
- *  Read the EEPROM for the current default LED configuration.  If the
- *  LED configuration is not valid, set to a valid LED configuration.
- **/
-s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data)
-{
-	s32 ret_val;
-
-	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
-	if (ret_val) {
-		e_dbg("NVM Read Error\n");
-		return ret_val;
-	}
-
-	if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
-		*data = ID_LED_DEFAULT;
-
-	return 0;
-}
-
-/**
- *  e1000e_id_led_init -
- *  @hw: pointer to the HW structure
- *
- **/
-s32 e1000e_id_led_init(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	s32 ret_val;
-	const u32 ledctl_mask = 0x000000FF;
-	const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
-	const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
-	u16 data, i, temp;
-	const u16 led_mask = 0x0F;
-
-	ret_val = hw->nvm.ops.valid_led_default(hw, &data);
-	if (ret_val)
-		return ret_val;
-
-	mac->ledctl_default = er32(LEDCTL);
-	mac->ledctl_mode1 = mac->ledctl_default;
-	mac->ledctl_mode2 = mac->ledctl_default;
-
-	for (i = 0; i < 4; i++) {
-		temp = (data >> (i << 2)) & led_mask;
-		switch (temp) {
-		case ID_LED_ON1_DEF2:
-		case ID_LED_ON1_ON2:
-		case ID_LED_ON1_OFF2:
-			mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
-			mac->ledctl_mode1 |= ledctl_on << (i << 3);
-			break;
-		case ID_LED_OFF1_DEF2:
-		case ID_LED_OFF1_ON2:
-		case ID_LED_OFF1_OFF2:
-			mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
-			mac->ledctl_mode1 |= ledctl_off << (i << 3);
-			break;
-		default:
-			/* Do nothing */
-			break;
-		}
-		switch (temp) {
-		case ID_LED_DEF1_ON2:
-		case ID_LED_ON1_ON2:
-		case ID_LED_OFF1_ON2:
-			mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
-			mac->ledctl_mode2 |= ledctl_on << (i << 3);
-			break;
-		case ID_LED_DEF1_OFF2:
-		case ID_LED_ON1_OFF2:
-		case ID_LED_OFF1_OFF2:
-			mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
-			mac->ledctl_mode2 |= ledctl_off << (i << 3);
-			break;
-		default:
-			/* Do nothing */
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_setup_led_generic - Configures SW controllable LED
- *  @hw: pointer to the HW structure
- *
- *  This prepares the SW controllable LED for use and saves the current state
- *  of the LED so it can be later restored.
- **/
-s32 e1000e_setup_led_generic(struct e1000_hw *hw)
-{
-	u32 ledctl;
-
-	if (hw->mac.ops.setup_led != e1000e_setup_led_generic)
-		return -E1000_ERR_CONFIG;
-
-	if (hw->phy.media_type == e1000_media_type_fiber) {
-		ledctl = er32(LEDCTL);
-		hw->mac.ledctl_default = ledctl;
-		/* Turn off LED0 */
-		ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
-		            E1000_LEDCTL_LED0_BLINK |
-		            E1000_LEDCTL_LED0_MODE_MASK);
-		ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
-		           E1000_LEDCTL_LED0_MODE_SHIFT);
-		ew32(LEDCTL, ledctl);
-	} else if (hw->phy.media_type == e1000_media_type_copper) {
-		ew32(LEDCTL, hw->mac.ledctl_mode1);
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_cleanup_led_generic - Set LED config to default operation
- *  @hw: pointer to the HW structure
- *
- *  Remove the current LED configuration and set the LED configuration
- *  to the default value, saved from the EEPROM.
- **/
-s32 e1000e_cleanup_led_generic(struct e1000_hw *hw)
-{
-	ew32(LEDCTL, hw->mac.ledctl_default);
-	return 0;
-}
-
-/**
- *  e1000e_blink_led_generic - Blink LED
- *  @hw: pointer to the HW structure
- *
- *  Blink the LEDs which are set to be on.
- **/
-s32 e1000e_blink_led_generic(struct e1000_hw *hw)
-{
-	u32 ledctl_blink = 0;
-	u32 i;
-
-	if (hw->phy.media_type == e1000_media_type_fiber) {
-		/* always blink LED0 for PCI-E fiber */
-		ledctl_blink = E1000_LEDCTL_LED0_BLINK |
-		     (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
-	} else {
-		/*
-		 * set the blink bit for each LED that's "on" (0x0E)
-		 * in ledctl_mode2
-		 */
-		ledctl_blink = hw->mac.ledctl_mode2;
-		for (i = 0; i < 4; i++)
-			if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
-			    E1000_LEDCTL_MODE_LED_ON)
-				ledctl_blink |= (E1000_LEDCTL_LED0_BLINK <<
-						 (i * 8));
-	}
-
-	ew32(LEDCTL, ledctl_blink);
-
-	return 0;
-}
-
-/**
- *  e1000e_led_on_generic - Turn LED on
- *  @hw: pointer to the HW structure
- *
- *  Turn LED on.
- **/
-s32 e1000e_led_on_generic(struct e1000_hw *hw)
-{
-	u32 ctrl;
-
-	switch (hw->phy.media_type) {
-	case e1000_media_type_fiber:
-		ctrl = er32(CTRL);
-		ctrl &= ~E1000_CTRL_SWDPIN0;
-		ctrl |= E1000_CTRL_SWDPIO0;
-		ew32(CTRL, ctrl);
-		break;
-	case e1000_media_type_copper:
-		ew32(LEDCTL, hw->mac.ledctl_mode2);
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_led_off_generic - Turn LED off
- *  @hw: pointer to the HW structure
- *
- *  Turn LED off.
- **/
-s32 e1000e_led_off_generic(struct e1000_hw *hw)
-{
-	u32 ctrl;
-
-	switch (hw->phy.media_type) {
-	case e1000_media_type_fiber:
-		ctrl = er32(CTRL);
-		ctrl |= E1000_CTRL_SWDPIN0;
-		ctrl |= E1000_CTRL_SWDPIO0;
-		ew32(CTRL, ctrl);
-		break;
-	case e1000_media_type_copper:
-		ew32(LEDCTL, hw->mac.ledctl_mode1);
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_set_pcie_no_snoop - Set PCI-express capabilities
- *  @hw: pointer to the HW structure
- *  @no_snoop: bitmap of snoop events
- *
- *  Set the PCI-express register to snoop for events enabled in 'no_snoop'.
- **/
-void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop)
-{
-	u32 gcr;
-
-	if (no_snoop) {
-		gcr = er32(GCR);
-		gcr &= ~(PCIE_NO_SNOOP_ALL);
-		gcr |= no_snoop;
-		ew32(GCR, gcr);
-	}
-}
-
-/**
- *  e1000e_disable_pcie_master - Disables PCI-express master access
- *  @hw: pointer to the HW structure
- *
- *  Returns 0 if successful, else returns -10
- *  (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused
- *  the master requests to be disabled.
- *
- *  Disables PCI-Express master access and verifies there are no pending
- *  requests.
- **/
-s32 e1000e_disable_pcie_master(struct e1000_hw *hw)
-{
-	u32 ctrl;
-	s32 timeout = MASTER_DISABLE_TIMEOUT;
-
-	ctrl = er32(CTRL);
-	ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
-	ew32(CTRL, ctrl);
-
-	while (timeout) {
-		if (!(er32(STATUS) &
-		      E1000_STATUS_GIO_MASTER_ENABLE))
-			break;
-		udelay(100);
-		timeout--;
-	}
-
-	if (!timeout) {
-		e_dbg("Master requests are pending.\n");
-		return -E1000_ERR_MASTER_REQUESTS_PENDING;
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_reset_adaptive - Reset Adaptive Interframe Spacing
- *  @hw: pointer to the HW structure
- *
- *  Reset the Adaptive Interframe Spacing throttle to default values.
- **/
-void e1000e_reset_adaptive(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-
-	if (!mac->adaptive_ifs) {
-		e_dbg("Not in Adaptive IFS mode!\n");
-		goto out;
-	}
-
-	mac->current_ifs_val = 0;
-	mac->ifs_min_val = IFS_MIN;
-	mac->ifs_max_val = IFS_MAX;
-	mac->ifs_step_size = IFS_STEP;
-	mac->ifs_ratio = IFS_RATIO;
-
-	mac->in_ifs_mode = false;
-	ew32(AIT, 0);
-out:
-	return;
-}
-
-/**
- *  e1000e_update_adaptive - Update Adaptive Interframe Spacing
- *  @hw: pointer to the HW structure
- *
- *  Update the Adaptive Interframe Spacing Throttle value based on the
- *  time between transmitted packets and time between collisions.
- **/
-void e1000e_update_adaptive(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-
-	if (!mac->adaptive_ifs) {
-		e_dbg("Not in Adaptive IFS mode!\n");
-		goto out;
-	}
-
-	if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
-		if (mac->tx_packet_delta > MIN_NUM_XMITS) {
-			mac->in_ifs_mode = true;
-			if (mac->current_ifs_val < mac->ifs_max_val) {
-				if (!mac->current_ifs_val)
-					mac->current_ifs_val = mac->ifs_min_val;
-				else
-					mac->current_ifs_val +=
-						mac->ifs_step_size;
-				ew32(AIT, mac->current_ifs_val);
-			}
-		}
-	} else {
-		if (mac->in_ifs_mode &&
-		    (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
-			mac->current_ifs_val = 0;
-			mac->in_ifs_mode = false;
-			ew32(AIT, 0);
-		}
-	}
-out:
-	return;
-}
-
-/**
- *  e1000_raise_eec_clk - Raise EEPROM clock
- *  @hw: pointer to the HW structure
- *  @eecd: pointer to the EEPROM
- *
- *  Enable/Raise the EEPROM clock bit.
- **/
-static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
-{
-	*eecd = *eecd | E1000_EECD_SK;
-	ew32(EECD, *eecd);
-	e1e_flush();
-	udelay(hw->nvm.delay_usec);
-}
-
-/**
- *  e1000_lower_eec_clk - Lower EEPROM clock
- *  @hw: pointer to the HW structure
- *  @eecd: pointer to the EEPROM
- *
- *  Clear/Lower the EEPROM clock bit.
- **/
-static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
-{
-	*eecd = *eecd & ~E1000_EECD_SK;
-	ew32(EECD, *eecd);
-	e1e_flush();
-	udelay(hw->nvm.delay_usec);
-}
-
-/**
- *  e1000_shift_out_eec_bits - Shift data bits our to the EEPROM
- *  @hw: pointer to the HW structure
- *  @data: data to send to the EEPROM
- *  @count: number of bits to shift out
- *
- *  We need to shift 'count' bits out to the EEPROM.  So, the value in the
- *  "data" parameter will be shifted out to the EEPROM one bit at a time.
- *  In order to do this, "data" must be broken down into bits.
- **/
-static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 eecd = er32(EECD);
-	u32 mask;
-
-	mask = 0x01 << (count - 1);
-	if (nvm->type == e1000_nvm_eeprom_spi)
-		eecd |= E1000_EECD_DO;
-
-	do {
-		eecd &= ~E1000_EECD_DI;
-
-		if (data & mask)
-			eecd |= E1000_EECD_DI;
-
-		ew32(EECD, eecd);
-		e1e_flush();
-
-		udelay(nvm->delay_usec);
-
-		e1000_raise_eec_clk(hw, &eecd);
-		e1000_lower_eec_clk(hw, &eecd);
-
-		mask >>= 1;
-	} while (mask);
-
-	eecd &= ~E1000_EECD_DI;
-	ew32(EECD, eecd);
-}
-
-/**
- *  e1000_shift_in_eec_bits - Shift data bits in from the EEPROM
- *  @hw: pointer to the HW structure
- *  @count: number of bits to shift in
- *
- *  In order to read a register from the EEPROM, we need to shift 'count' bits
- *  in from the EEPROM.  Bits are "shifted in" by raising the clock input to
- *  the EEPROM (setting the SK bit), and then reading the value of the data out
- *  "DO" bit.  During this "shifting in" process the data in "DI" bit should
- *  always be clear.
- **/
-static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
-{
-	u32 eecd;
-	u32 i;
-	u16 data;
-
-	eecd = er32(EECD);
-
-	eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
-	data = 0;
-
-	for (i = 0; i < count; i++) {
-		data <<= 1;
-		e1000_raise_eec_clk(hw, &eecd);
-
-		eecd = er32(EECD);
-
-		eecd &= ~E1000_EECD_DI;
-		if (eecd & E1000_EECD_DO)
-			data |= 1;
-
-		e1000_lower_eec_clk(hw, &eecd);
-	}
-
-	return data;
-}
-
-/**
- *  e1000e_poll_eerd_eewr_done - Poll for EEPROM read/write completion
- *  @hw: pointer to the HW structure
- *  @ee_reg: EEPROM flag for polling
- *
- *  Polls the EEPROM status bit for either read or write completion based
- *  upon the value of 'ee_reg'.
- **/
-s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
-{
-	u32 attempts = 100000;
-	u32 i, reg = 0;
-
-	for (i = 0; i < attempts; i++) {
-		if (ee_reg == E1000_NVM_POLL_READ)
-			reg = er32(EERD);
-		else
-			reg = er32(EEWR);
-
-		if (reg & E1000_NVM_RW_REG_DONE)
-			return 0;
-
-		udelay(5);
-	}
-
-	return -E1000_ERR_NVM;
-}
-
-/**
- *  e1000e_acquire_nvm - Generic request for access to EEPROM
- *  @hw: pointer to the HW structure
- *
- *  Set the EEPROM access request bit and wait for EEPROM access grant bit.
- *  Return successful if access grant bit set, else clear the request for
- *  EEPROM access and return -E1000_ERR_NVM (-1).
- **/
-s32 e1000e_acquire_nvm(struct e1000_hw *hw)
-{
-	u32 eecd = er32(EECD);
-	s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
-
-	ew32(EECD, eecd | E1000_EECD_REQ);
-	eecd = er32(EECD);
-
-	while (timeout) {
-		if (eecd & E1000_EECD_GNT)
-			break;
-		udelay(5);
-		eecd = er32(EECD);
-		timeout--;
-	}
-
-	if (!timeout) {
-		eecd &= ~E1000_EECD_REQ;
-		ew32(EECD, eecd);
-		e_dbg("Could not acquire NVM grant\n");
-		return -E1000_ERR_NVM;
-	}
-
-	return 0;
-}
-
-/**
- *  e1000_standby_nvm - Return EEPROM to standby state
- *  @hw: pointer to the HW structure
- *
- *  Return the EEPROM to a standby state.
- **/
-static void e1000_standby_nvm(struct e1000_hw *hw)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 eecd = er32(EECD);
-
-	if (nvm->type == e1000_nvm_eeprom_spi) {
-		/* Toggle CS to flush commands */
-		eecd |= E1000_EECD_CS;
-		ew32(EECD, eecd);
-		e1e_flush();
-		udelay(nvm->delay_usec);
-		eecd &= ~E1000_EECD_CS;
-		ew32(EECD, eecd);
-		e1e_flush();
-		udelay(nvm->delay_usec);
-	}
-}
-
-/**
- *  e1000_stop_nvm - Terminate EEPROM command
- *  @hw: pointer to the HW structure
- *
- *  Terminates the current command by inverting the EEPROM's chip select pin.
- **/
-static void e1000_stop_nvm(struct e1000_hw *hw)
-{
-	u32 eecd;
-
-	eecd = er32(EECD);
-	if (hw->nvm.type == e1000_nvm_eeprom_spi) {
-		/* Pull CS high */
-		eecd |= E1000_EECD_CS;
-		e1000_lower_eec_clk(hw, &eecd);
-	}
-}
-
-/**
- *  e1000e_release_nvm - Release exclusive access to EEPROM
- *  @hw: pointer to the HW structure
- *
- *  Stop any current commands to the EEPROM and clear the EEPROM request bit.
- **/
-void e1000e_release_nvm(struct e1000_hw *hw)
-{
-	u32 eecd;
-
-	e1000_stop_nvm(hw);
-
-	eecd = er32(EECD);
-	eecd &= ~E1000_EECD_REQ;
-	ew32(EECD, eecd);
-}
-
-/**
- *  e1000_ready_nvm_eeprom - Prepares EEPROM for read/write
- *  @hw: pointer to the HW structure
- *
- *  Setups the EEPROM for reading and writing.
- **/
-static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 eecd = er32(EECD);
-	u8 spi_stat_reg;
-
-	if (nvm->type == e1000_nvm_eeprom_spi) {
-		u16 timeout = NVM_MAX_RETRY_SPI;
-
-		/* Clear SK and CS */
-		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
-		ew32(EECD, eecd);
-		e1e_flush();
-		udelay(1);
-
-		/*
-		 * Read "Status Register" repeatedly until the LSB is cleared.
-		 * The EEPROM will signal that the command has been completed
-		 * by clearing bit 0 of the internal status register.  If it's
-		 * not cleared within 'timeout', then error out.
-		 */
-		while (timeout) {
-			e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
-						 hw->nvm.opcode_bits);
-			spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8);
-			if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
-				break;
-
-			udelay(5);
-			e1000_standby_nvm(hw);
-			timeout--;
-		}
-
-		if (!timeout) {
-			e_dbg("SPI NVM Status error\n");
-			return -E1000_ERR_NVM;
-		}
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_read_nvm_eerd - Reads EEPROM using EERD register
- *  @hw: pointer to the HW structure
- *  @offset: offset of word in the EEPROM to read
- *  @words: number of words to read
- *  @data: word read from the EEPROM
- *
- *  Reads a 16 bit word from the EEPROM using the EERD register.
- **/
-s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 i, eerd = 0;
-	s32 ret_val = 0;
-
-	/*
-	 * A check for invalid values:  offset too large, too many words,
-	 * too many words for the offset, and not enough words.
-	 */
-	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
-	    (words == 0)) {
-		e_dbg("nvm parameter(s) out of bounds\n");
-		return -E1000_ERR_NVM;
-	}
-
-	for (i = 0; i < words; i++) {
-		eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
-		       E1000_NVM_RW_REG_START;
-
-		ew32(EERD, eerd);
-		ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
-		if (ret_val)
-			break;
-
-		data[i] = (er32(EERD) >> E1000_NVM_RW_REG_DATA);
-	}
-
-	return ret_val;
-}
-
-/**
- *  e1000e_write_nvm_spi - Write to EEPROM using SPI
- *  @hw: pointer to the HW structure
- *  @offset: offset within the EEPROM to be written to
- *  @words: number of words to write
- *  @data: 16 bit word(s) to be written to the EEPROM
- *
- *  Writes data to EEPROM at offset using SPI interface.
- *
- *  If e1000e_update_nvm_checksum is not called after this function , the
- *  EEPROM will most likely contain an invalid checksum.
- **/
-s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	s32 ret_val;
-	u16 widx = 0;
-
-	/*
-	 * A check for invalid values:  offset too large, too many words,
-	 * and not enough words.
-	 */
-	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
-	    (words == 0)) {
-		e_dbg("nvm parameter(s) out of bounds\n");
-		return -E1000_ERR_NVM;
-	}
-
-	ret_val = nvm->ops.acquire(hw);
-	if (ret_val)
-		return ret_val;
-
-	while (widx < words) {
-		u8 write_opcode = NVM_WRITE_OPCODE_SPI;
-
-		ret_val = e1000_ready_nvm_eeprom(hw);
-		if (ret_val) {
-			nvm->ops.release(hw);
-			return ret_val;
-		}
-
-		e1000_standby_nvm(hw);
-
-		/* Send the WRITE ENABLE command (8 bit opcode) */
-		e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
-					 nvm->opcode_bits);
-
-		e1000_standby_nvm(hw);
-
-		/*
-		 * Some SPI eeproms use the 8th address bit embedded in the
-		 * opcode
-		 */
-		if ((nvm->address_bits == 8) && (offset >= 128))
-			write_opcode |= NVM_A8_OPCODE_SPI;
-
-		/* Send the Write command (8-bit opcode + addr) */
-		e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
-		e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
-					 nvm->address_bits);
-
-		/* Loop to allow for up to whole page write of eeprom */
-		while (widx < words) {
-			u16 word_out = data[widx];
-			word_out = (word_out >> 8) | (word_out << 8);
-			e1000_shift_out_eec_bits(hw, word_out, 16);
-			widx++;
-
-			if ((((offset + widx) * 2) % nvm->page_size) == 0) {
-				e1000_standby_nvm(hw);
-				break;
-			}
-		}
-	}
-
-	usleep_range(10000, 20000);
-	nvm->ops.release(hw);
-	return 0;
-}
-
-/**
- *  e1000_read_pba_string_generic - Read device part number
- *  @hw: pointer to the HW structure
- *  @pba_num: pointer to device part number
- *  @pba_num_size: size of part number buffer
- *
- *  Reads the product board assembly (PBA) number from the EEPROM and stores
- *  the value in pba_num.
- **/
-s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
-				  u32 pba_num_size)
-{
-	s32 ret_val;
-	u16 nvm_data;
-	u16 pba_ptr;
-	u16 offset;
-	u16 length;
-
-	if (pba_num == NULL) {
-		e_dbg("PBA string buffer was null\n");
-		ret_val = E1000_ERR_INVALID_ARGUMENT;
-		goto out;
-	}
-
-	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
-	if (ret_val) {
-		e_dbg("NVM Read Error\n");
-		goto out;
-	}
-
-	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
-	if (ret_val) {
-		e_dbg("NVM Read Error\n");
-		goto out;
-	}
-
-	/*
-	 * if nvm_data is not ptr guard the PBA must be in legacy format which
-	 * means pba_ptr is actually our second data word for the PBA number
-	 * and we can decode it into an ascii string
-	 */
-	if (nvm_data != NVM_PBA_PTR_GUARD) {
-		e_dbg("NVM PBA number is not stored as string\n");
-
-		/* we will need 11 characters to store the PBA */
-		if (pba_num_size < 11) {
-			e_dbg("PBA string buffer too small\n");
-			return E1000_ERR_NO_SPACE;
-		}
-
-		/* extract hex string from data and pba_ptr */
-		pba_num[0] = (nvm_data >> 12) & 0xF;
-		pba_num[1] = (nvm_data >> 8) & 0xF;
-		pba_num[2] = (nvm_data >> 4) & 0xF;
-		pba_num[3] = nvm_data & 0xF;
-		pba_num[4] = (pba_ptr >> 12) & 0xF;
-		pba_num[5] = (pba_ptr >> 8) & 0xF;
-		pba_num[6] = '-';
-		pba_num[7] = 0;
-		pba_num[8] = (pba_ptr >> 4) & 0xF;
-		pba_num[9] = pba_ptr & 0xF;
-
-		/* put a null character on the end of our string */
-		pba_num[10] = '\0';
-
-		/* switch all the data but the '-' to hex char */
-		for (offset = 0; offset < 10; offset++) {
-			if (pba_num[offset] < 0xA)
-				pba_num[offset] += '0';
-			else if (pba_num[offset] < 0x10)
-				pba_num[offset] += 'A' - 0xA;
-		}
-
-		goto out;
-	}
-
-	ret_val = e1000_read_nvm(hw, pba_ptr, 1, &length);
-	if (ret_val) {
-		e_dbg("NVM Read Error\n");
-		goto out;
-	}
-
-	if (length == 0xFFFF || length == 0) {
-		e_dbg("NVM PBA number section invalid length\n");
-		ret_val = E1000_ERR_NVM_PBA_SECTION;
-		goto out;
-	}
-	/* check if pba_num buffer is big enough */
-	if (pba_num_size < (((u32)length * 2) - 1)) {
-		e_dbg("PBA string buffer too small\n");
-		ret_val = E1000_ERR_NO_SPACE;
-		goto out;
-	}
-
-	/* trim pba length from start of string */
-	pba_ptr++;
-	length--;
-
-	for (offset = 0; offset < length; offset++) {
-		ret_val = e1000_read_nvm(hw, pba_ptr + offset, 1, &nvm_data);
-		if (ret_val) {
-			e_dbg("NVM Read Error\n");
-			goto out;
-		}
-		pba_num[offset * 2] = (u8)(nvm_data >> 8);
-		pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
-	}
-	pba_num[offset * 2] = '\0';
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_read_mac_addr_generic - Read device MAC address
- *  @hw: pointer to the HW structure
- *
- *  Reads the device MAC address from the EEPROM and stores the value.
- *  Since devices with two ports use the same EEPROM, we increment the
- *  last bit in the MAC address for the second port.
- **/
-s32 e1000_read_mac_addr_generic(struct e1000_hw *hw)
-{
-	u32 rar_high;
-	u32 rar_low;
-	u16 i;
-
-	rar_high = er32(RAH(0));
-	rar_low = er32(RAL(0));
-
-	for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
-		hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
-
-	for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
-		hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
-
-	for (i = 0; i < ETH_ALEN; i++)
-		hw->mac.addr[i] = hw->mac.perm_addr[i];
-
-	return 0;
-}
-
-/**
- *  e1000e_validate_nvm_checksum_generic - Validate EEPROM checksum
- *  @hw: pointer to the HW structure
- *
- *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
- *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
- **/
-s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw)
-{
-	s32 ret_val;
-	u16 checksum = 0;
-	u16 i, nvm_data;
-
-	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
-		ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
-		if (ret_val) {
-			e_dbg("NVM Read Error\n");
-			return ret_val;
-		}
-		checksum += nvm_data;
-	}
-
-	if (checksum != (u16) NVM_SUM) {
-		e_dbg("NVM Checksum Invalid\n");
-		return -E1000_ERR_NVM;
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_update_nvm_checksum_generic - Update EEPROM checksum
- *  @hw: pointer to the HW structure
- *
- *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
- *  up to the checksum.  Then calculates the EEPROM checksum and writes the
- *  value to the EEPROM.
- **/
-s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
-{
-	s32 ret_val;
-	u16 checksum = 0;
-	u16 i, nvm_data;
-
-	for (i = 0; i < NVM_CHECKSUM_REG; i++) {
-		ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
-		if (ret_val) {
-			e_dbg("NVM Read Error while updating checksum.\n");
-			return ret_val;
-		}
-		checksum += nvm_data;
-	}
-	checksum = (u16) NVM_SUM - checksum;
-	ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum);
-	if (ret_val)
-		e_dbg("NVM Write Error while updating checksum.\n");
-
-	return ret_val;
-}
-
-/**
- *  e1000e_reload_nvm - Reloads EEPROM
- *  @hw: pointer to the HW structure
- *
- *  Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
- *  extended control register.
- **/
-void e1000e_reload_nvm(struct e1000_hw *hw)
-{
-	u32 ctrl_ext;
-
-	udelay(10);
-	ctrl_ext = er32(CTRL_EXT);
-	ctrl_ext |= E1000_CTRL_EXT_EE_RST;
-	ew32(CTRL_EXT, ctrl_ext);
-	e1e_flush();
-}
-
-/**
- *  e1000_calculate_checksum - Calculate checksum for buffer
- *  @buffer: pointer to EEPROM
- *  @length: size of EEPROM to calculate a checksum for
- *
- *  Calculates the checksum for some buffer on a specified length.  The
- *  checksum calculated is returned.
- **/
-static u8 e1000_calculate_checksum(u8 *buffer, u32 length)
-{
-	u32 i;
-	u8  sum = 0;
-
-	if (!buffer)
-		return 0;
-
-	for (i = 0; i < length; i++)
-		sum += buffer[i];
-
-	return (u8) (0 - sum);
-}
-
-/**
- *  e1000_mng_enable_host_if - Checks host interface is enabled
- *  @hw: pointer to the HW structure
- *
- *  Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
- *
- *  This function checks whether the HOST IF is enabled for command operation
- *  and also checks whether the previous command is completed.  It busy waits
- *  in case of previous command is not completed.
- **/
-static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
-{
-	u32 hicr;
-	u8 i;
-
-	if (!(hw->mac.arc_subsystem_valid)) {
-		e_dbg("ARC subsystem not valid.\n");
-		return -E1000_ERR_HOST_INTERFACE_COMMAND;
-	}
-
-	/* Check that the host interface is enabled. */
-	hicr = er32(HICR);
-	if ((hicr & E1000_HICR_EN) == 0) {
-		e_dbg("E1000_HOST_EN bit disabled.\n");
-		return -E1000_ERR_HOST_INTERFACE_COMMAND;
-	}
-	/* check the previous command is completed */
-	for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
-		hicr = er32(HICR);
-		if (!(hicr & E1000_HICR_C))
-			break;
-		mdelay(1);
-	}
-
-	if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
-		e_dbg("Previous command timeout failed .\n");
-		return -E1000_ERR_HOST_INTERFACE_COMMAND;
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_check_mng_mode_generic - check management mode
- *  @hw: pointer to the HW structure
- *
- *  Reads the firmware semaphore register and returns true (>0) if
- *  manageability is enabled, else false (0).
- **/
-bool e1000e_check_mng_mode_generic(struct e1000_hw *hw)
-{
-	u32 fwsm = er32(FWSM);
-
-	return (fwsm & E1000_FWSM_MODE_MASK) ==
-		(E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
-}
-
-/**
- *  e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx
- *  @hw: pointer to the HW structure
- *
- *  Enables packet filtering on transmit packets if manageability is enabled
- *  and host interface is enabled.
- **/
-bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
-{
-	struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
-	u32 *buffer = (u32 *)&hw->mng_cookie;
-	u32 offset;
-	s32 ret_val, hdr_csum, csum;
-	u8 i, len;
-
-	hw->mac.tx_pkt_filtering = true;
-
-	/* No manageability, no filtering */
-	if (!e1000e_check_mng_mode(hw)) {
-		hw->mac.tx_pkt_filtering = false;
-		goto out;
-	}
-
-	/*
-	 * If we can't read from the host interface for whatever
-	 * reason, disable filtering.
-	 */
-	ret_val = e1000_mng_enable_host_if(hw);
-	if (ret_val) {
-		hw->mac.tx_pkt_filtering = false;
-		goto out;
-	}
-
-	/* Read in the header.  Length and offset are in dwords. */
-	len    = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
-	offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
-	for (i = 0; i < len; i++)
-		*(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset + i);
-	hdr_csum = hdr->checksum;
-	hdr->checksum = 0;
-	csum = e1000_calculate_checksum((u8 *)hdr,
-					E1000_MNG_DHCP_COOKIE_LENGTH);
-	/*
-	 * If either the checksums or signature don't match, then
-	 * the cookie area isn't considered valid, in which case we
-	 * take the safe route of assuming Tx filtering is enabled.
-	 */
-	if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
-		hw->mac.tx_pkt_filtering = true;
-		goto out;
-	}
-
-	/* Cookie area is valid, make the final check for filtering. */
-	if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) {
-		hw->mac.tx_pkt_filtering = false;
-		goto out;
-	}
-
-out:
-	return hw->mac.tx_pkt_filtering;
-}
-
-/**
- *  e1000_mng_write_cmd_header - Writes manageability command header
- *  @hw: pointer to the HW structure
- *  @hdr: pointer to the host interface command header
- *
- *  Writes the command header after does the checksum calculation.
- **/
-static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
-				  struct e1000_host_mng_command_header *hdr)
-{
-	u16 i, length = sizeof(struct e1000_host_mng_command_header);
-
-	/* Write the whole command header structure with new checksum. */
-
-	hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length);
-
-	length >>= 2;
-	/* Write the relevant command block into the ram area. */
-	for (i = 0; i < length; i++) {
-		E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i,
-					    *((u32 *) hdr + i));
-		e1e_flush();
-	}
-
-	return 0;
-}
-
-/**
- *  e1000_mng_host_if_write - Write to the manageability host interface
- *  @hw: pointer to the HW structure
- *  @buffer: pointer to the host interface buffer
- *  @length: size of the buffer
- *  @offset: location in the buffer to write to
- *  @sum: sum of the data (not checksum)
- *
- *  This function writes the buffer content at the offset given on the host if.
- *  It also does alignment considerations to do the writes in most efficient
- *  way.  Also fills up the sum of the buffer in *buffer parameter.
- **/
-static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer,
-				   u16 length, u16 offset, u8 *sum)
-{
-	u8 *tmp;
-	u8 *bufptr = buffer;
-	u32 data = 0;
-	u16 remaining, i, j, prev_bytes;
-
-	/* sum = only sum of the data and it is not checksum */
-
-	if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH)
-		return -E1000_ERR_PARAM;
-
-	tmp = (u8 *)&data;
-	prev_bytes = offset & 0x3;
-	offset >>= 2;
-
-	if (prev_bytes) {
-		data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset);
-		for (j = prev_bytes; j < sizeof(u32); j++) {
-			*(tmp + j) = *bufptr++;
-			*sum += *(tmp + j);
-		}
-		E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data);
-		length -= j - prev_bytes;
-		offset++;
-	}
-
-	remaining = length & 0x3;
-	length -= remaining;
-
-	/* Calculate length in DWORDs */
-	length >>= 2;
-
-	/*
-	 * The device driver writes the relevant command block into the
-	 * ram area.
-	 */
-	for (i = 0; i < length; i++) {
-		for (j = 0; j < sizeof(u32); j++) {
-			*(tmp + j) = *bufptr++;
-			*sum += *(tmp + j);
-		}
-
-		E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
-	}
-	if (remaining) {
-		for (j = 0; j < sizeof(u32); j++) {
-			if (j < remaining)
-				*(tmp + j) = *bufptr++;
-			else
-				*(tmp + j) = 0;
-
-			*sum += *(tmp + j);
-		}
-		E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
-	}
-
-	return 0;
-}
-
-/**
- *  e1000e_mng_write_dhcp_info - Writes DHCP info to host interface
- *  @hw: pointer to the HW structure
- *  @buffer: pointer to the host interface
- *  @length: size of the buffer
- *
- *  Writes the DHCP information to the host interface.
- **/
-s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
-{
-	struct e1000_host_mng_command_header hdr;
-	s32 ret_val;
-	u32 hicr;
-
-	hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
-	hdr.command_length = length;
-	hdr.reserved1 = 0;
-	hdr.reserved2 = 0;
-	hdr.checksum = 0;
-
-	/* Enable the host interface */
-	ret_val = e1000_mng_enable_host_if(hw);
-	if (ret_val)
-		return ret_val;
-
-	/* Populate the host interface with the contents of "buffer". */
-	ret_val = e1000_mng_host_if_write(hw, buffer, length,
-					  sizeof(hdr), &(hdr.checksum));
-	if (ret_val)
-		return ret_val;
-
-	/* Write the manageability command header */
-	ret_val = e1000_mng_write_cmd_header(hw, &hdr);
-	if (ret_val)
-		return ret_val;
-
-	/* Tell the ARC a new command is pending. */
-	hicr = er32(HICR);
-	ew32(HICR, hicr | E1000_HICR_C);
-
-	return 0;
-}
-
-/**
- *  e1000e_enable_mng_pass_thru - Check if management passthrough is needed
- *  @hw: pointer to the HW structure
- *
- *  Verifies the hardware needs to leave interface enabled so that frames can
- *  be directed to and from the management interface.
- **/
-bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
-{
-	u32 manc;
-	u32 fwsm, factps;
-	bool ret_val = false;
-
-	manc = er32(MANC);
-
-	if (!(manc & E1000_MANC_RCV_TCO_EN))
-		goto out;
-
-	if (hw->mac.has_fwsm) {
-		fwsm = er32(FWSM);
-		factps = er32(FACTPS);
-
-		if (!(factps & E1000_FACTPS_MNGCG) &&
-		    ((fwsm & E1000_FWSM_MODE_MASK) ==
-		     (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
-			ret_val = true;
-			goto out;
-		}
-	} else if ((hw->mac.type == e1000_82574) ||
-		   (hw->mac.type == e1000_82583)) {
-		u16 data;
-
-		factps = er32(FACTPS);
-		e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
-
-		if (!(factps & E1000_FACTPS_MNGCG) &&
-		    ((data & E1000_NVM_INIT_CTRL2_MNGM) ==
-		     (e1000_mng_mode_pt << 13))) {
-			ret_val = true;
-			goto out;
-		}
-	} else if ((manc & E1000_MANC_SMBUS_EN) &&
-		    !(manc & E1000_MANC_ASF_EN)) {
-			ret_val = true;
-			goto out;
-	}
-
-out:
-	return ret_val;
-}