summaryrefslogtreecommitdiff
path: root/drivers/net/e1000
diff options
context:
space:
mode:
authorEmil Tantilov <emil.s.tantilov@intel.com>2010-04-27 18:02:58 +0400
committerDavid S. Miller <davem@davemloft.net>2010-04-28 04:05:03 +0400
commit675ad47375c76a7c3be4ace9554d92cd55518ced (patch)
tree54acb7e8aa4db5e93b960d565b1cc2dce45988b9 /drivers/net/e1000
parent709b9326ef6fc1b7e379d47d5f39ebc27dad3f4d (diff)
downloadlinux-675ad47375c76a7c3be4ace9554d92cd55518ced.tar.xz
e1000: Use netdev_<level>, pr_<level> and dev_<level>
This patch is an alternative to similar patch provided by Joe Perches. Substitute DPRINTK macro for e_<level> that uses netdev_<level> and dev_<level> similar to e1000e. - Convert printk to pr_<level> where applicable. - Use common #define pr_fmt for the driver. - Use dev_<level> for displaying text in parts of the driver where the interface name is not assigned (like e1000_param.c). - Better align test with the new macros. CC: Joe Perches <joe@perches.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/e1000')
-rw-r--r--drivers/net/e1000/e1000.h37
-rw-r--r--drivers/net/e1000/e1000_ethtool.c31
-rw-r--r--drivers/net/e1000/e1000_hw.c356
-rw-r--r--drivers/net/e1000/e1000_hw.h1
-rw-r--r--drivers/net/e1000/e1000_main.c239
-rw-r--r--drivers/net/e1000/e1000_osdep.h14
-rw-r--r--drivers/net/e1000/e1000_param.c94
7 files changed, 367 insertions, 405 deletions
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 2f29c2131851..40b62b406b08 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -81,23 +81,6 @@ struct e1000_adapter;
#include "e1000_hw.h"
-#ifdef DBG
-#define E1000_DBG(args...) printk(KERN_DEBUG "e1000: " args)
-#else
-#define E1000_DBG(args...)
-#endif
-
-#define E1000_ERR(args...) printk(KERN_ERR "e1000: " args)
-
-#define PFX "e1000: "
-
-#define DPRINTK(nlevel, klevel, fmt, args...) \
-do { \
- if (NETIF_MSG_##nlevel & adapter->msg_enable) \
- printk(KERN_##klevel PFX "%s: %s: " fmt, \
- adapter->netdev->name, __func__, ##args); \
-} while (0)
-
#define E1000_MAX_INTR 10
/* TX/RX descriptor defines */
@@ -335,6 +318,25 @@ enum e1000_state_t {
__E1000_DOWN
};
+#undef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+extern struct net_device *e1000_get_hw_dev(struct e1000_hw *hw);
+#define e_dbg(format, arg...) \
+ netdev_dbg(e1000_get_hw_dev(hw), format, ## arg)
+#define e_err(format, arg...) \
+ netdev_err(adapter->netdev, format, ## arg)
+#define e_info(format, arg...) \
+ netdev_info(adapter->netdev, format, ## arg)
+#define e_warn(format, arg...) \
+ netdev_warn(adapter->netdev, format, ## arg)
+#define e_notice(format, arg...) \
+ netdev_notice(adapter->netdev, format, ## arg)
+#define e_dev_info(format, arg...) \
+ dev_info(&adapter->pdev->dev, format, ## arg)
+#define e_dev_warn(format, arg...) \
+ dev_warn(&adapter->pdev->dev, format, ## arg)
+
extern char e1000_driver_name[];
extern const char e1000_driver_version[];
@@ -352,5 +354,6 @@ extern bool e1000_has_link(struct e1000_adapter *adapter);
extern void e1000_power_up_phy(struct e1000_adapter *);
extern void e1000_set_ethtool_ops(struct net_device *netdev);
extern void e1000_check_options(struct e1000_adapter *adapter);
+extern char *e1000_get_hw_dev_name(struct e1000_hw *hw);
#endif /* _E1000_H_ */
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 616b405a1cb1..d6931cabe421 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -346,7 +346,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data)
netdev->features &= ~NETIF_F_TSO6;
- DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
+ e_info("TSO is %s\n", data ? "Enabled" : "Disabled");
adapter->tso_force = true;
return 0;
}
@@ -714,9 +714,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
writel(write & test[i], address);
read = readl(address);
if (read != (write & test[i] & mask)) {
- DPRINTK(DRV, ERR, "pattern test reg %04X failed: "
- "got 0x%08X expected 0x%08X\n",
- reg, read, (write & test[i] & mask));
+ e_info("pattern test reg %04X failed: "
+ "got 0x%08X expected 0x%08X\n",
+ reg, read, (write & test[i] & mask));
*data = reg;
return true;
}
@@ -734,9 +734,9 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
writel(write & mask, address);
read = readl(address);
if ((read & mask) != (write & mask)) {
- DPRINTK(DRV, ERR, "set/check reg %04X test failed: "
- "got 0x%08X expected 0x%08X\n",
- reg, (read & mask), (write & mask));
+ e_err("set/check reg %04X test failed: "
+ "got 0x%08X expected 0x%08X\n",
+ reg, (read & mask), (write & mask));
*data = reg;
return true;
}
@@ -779,8 +779,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
ew32(STATUS, toggle);
after = er32(STATUS) & toggle;
if (value != after) {
- DPRINTK(DRV, ERR, "failed STATUS register test got: "
- "0x%08X expected: 0x%08X\n", after, value);
+ e_err("failed STATUS register test got: "
+ "0x%08X expected: 0x%08X\n", after, value);
*data = 1;
return 1;
}
@@ -894,8 +894,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
*data = 1;
return -1;
}
- DPRINTK(HW, INFO, "testing %s interrupt\n",
- (shared_int ? "shared" : "unshared"));
+ e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
/* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF);
@@ -1564,7 +1563,7 @@ static void e1000_diag_test(struct net_device *netdev,
u8 forced_speed_duplex = hw->forced_speed_duplex;
u8 autoneg = hw->autoneg;
- DPRINTK(HW, INFO, "offline testing starting\n");
+ e_info("offline testing starting\n");
/* Link test performed before hardware reset so autoneg doesn't
* interfere with test result */
@@ -1604,7 +1603,7 @@ static void e1000_diag_test(struct net_device *netdev,
if (if_running)
dev_open(netdev);
} else {
- DPRINTK(HW, INFO, "online testing starting\n");
+ e_info("online testing starting\n");
/* Online tests */
if (e1000_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1697,7 +1696,7 @@ static void e1000_get_wol(struct net_device *netdev,
wol->supported &= ~WAKE_UCAST;
if (adapter->wol & E1000_WUFC_EX)
- DPRINTK(DRV, ERR, "Interface does not support "
+ e_err("Interface does not support "
"directed (unicast) frame wake-up packets\n");
break;
default:
@@ -1731,8 +1730,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
switch (hw->device_id) {
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
if (wol->wolopts & WAKE_UCAST) {
- DPRINTK(DRV, ERR, "Interface does not support "
- "directed (unicast) frame wake-up packets\n");
+ e_err("Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
return -EOPNOTSUPP;
}
break;
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index e2b6e6e7ba6a..c7e242b69a18 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -30,7 +30,7 @@
* Shared functions for accessing and configuring the MAC
*/
-#include "e1000_hw.h"
+#include "e1000.h"
static s32 e1000_check_downshift(struct e1000_hw *hw);
static s32 e1000_check_polarity(struct e1000_hw *hw,
@@ -114,7 +114,7 @@ static DEFINE_SPINLOCK(e1000_eeprom_lock);
*/
static s32 e1000_set_phy_type(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_set_phy_type");
+ e_dbg("e1000_set_phy_type");
if (hw->mac_type == e1000_undefined)
return -E1000_ERR_PHY_TYPE;
@@ -152,7 +152,7 @@ static void e1000_phy_init_script(struct e1000_hw *hw)
u32 ret_val;
u16 phy_saved_data;
- DEBUGFUNC("e1000_phy_init_script");
+ e_dbg("e1000_phy_init_script");
if (hw->phy_init_script) {
msleep(20);
@@ -245,7 +245,7 @@ static void e1000_phy_init_script(struct e1000_hw *hw)
*/
s32 e1000_set_mac_type(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_set_mac_type");
+ e_dbg("e1000_set_mac_type");
switch (hw->device_id) {
case E1000_DEV_ID_82542:
@@ -354,7 +354,7 @@ void e1000_set_media_type(struct e1000_hw *hw)
{
u32 status;
- DEBUGFUNC("e1000_set_media_type");
+ e_dbg("e1000_set_media_type");
if (hw->mac_type != e1000_82543) {
/* tbi_compatibility is only valid on 82543 */
@@ -401,16 +401,16 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
u32 led_ctrl;
s32 ret_val;
- DEBUGFUNC("e1000_reset_hw");
+ e_dbg("e1000_reset_hw");
/* For 82542 (rev 2.0), disable MWI before issuing a device reset */
if (hw->mac_type == e1000_82542_rev2_0) {
- DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ e_dbg("Disabling MWI on 82542 rev 2.0\n");
e1000_pci_clear_mwi(hw);
}
/* Clear interrupt mask to stop board from generating interrupts */
- DEBUGOUT("Masking off all interrupts\n");
+ e_dbg("Masking off all interrupts\n");
ew32(IMC, 0xffffffff);
/* Disable the Transmit and Receive units. Then delay to allow
@@ -442,7 +442,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
* the current PCI configuration. The global reset bit is self-
* clearing, and should clear within a microsecond.
*/
- DEBUGOUT("Issuing a global reset to MAC\n");
+ e_dbg("Issuing a global reset to MAC\n");
switch (hw->mac_type) {
case e1000_82544:
@@ -516,7 +516,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
}
/* Clear interrupt mask to stop board from generating interrupts */
- DEBUGOUT("Masking off all interrupts\n");
+ e_dbg("Masking off all interrupts\n");
ew32(IMC, 0xffffffff);
/* Clear any pending interrupt events. */
@@ -549,12 +549,12 @@ s32 e1000_init_hw(struct e1000_hw *hw)
u32 mta_size;
u32 ctrl_ext;
- DEBUGFUNC("e1000_init_hw");
+ e_dbg("e1000_init_hw");
/* Initialize Identification LED */
ret_val = e1000_id_led_init(hw);
if (ret_val) {
- DEBUGOUT("Error Initializing Identification LED\n");
+ e_dbg("Error Initializing Identification LED\n");
return ret_val;
}
@@ -562,14 +562,14 @@ s32 e1000_init_hw(struct e1000_hw *hw)
e1000_set_media_type(hw);
/* Disabling VLAN filtering. */
- DEBUGOUT("Initializing the IEEE VLAN\n");
+ e_dbg("Initializing the IEEE VLAN\n");
if (hw->mac_type < e1000_82545_rev_3)
ew32(VET, 0);
e1000_clear_vfta(hw);
/* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
if (hw->mac_type == e1000_82542_rev2_0) {
- DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ e_dbg("Disabling MWI on 82542 rev 2.0\n");
e1000_pci_clear_mwi(hw);
ew32(RCTL, E1000_RCTL_RST);
E1000_WRITE_FLUSH();
@@ -591,7 +591,7 @@ s32 e1000_init_hw(struct e1000_hw *hw)
}
/* Zero out the Multicast HASH table */
- DEBUGOUT("Zeroing the MTA\n");
+ e_dbg("Zeroing the MTA\n");
mta_size = E1000_MC_TBL_SIZE;
for (i = 0; i < mta_size; i++) {
E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
@@ -662,7 +662,7 @@ static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
u16 eeprom_data;
s32 ret_val;
- DEBUGFUNC("e1000_adjust_serdes_amplitude");
+ e_dbg("e1000_adjust_serdes_amplitude");
if (hw->media_type != e1000_media_type_internal_serdes)
return E1000_SUCCESS;
@@ -709,7 +709,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
s32 ret_val;
u16 eeprom_data;
- DEBUGFUNC("e1000_setup_link");
+ e_dbg("e1000_setup_link");
/* Read and store word 0x0F of the EEPROM. This word contains bits
* that determine the hardware's default PAUSE (flow control) mode,
@@ -723,7 +723,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
1, &eeprom_data);
if (ret_val) {
- DEBUGOUT("EEPROM Read Error\n");
+ e_dbg("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
@@ -747,7 +747,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
hw->original_fc = hw->fc;
- DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc);
+ e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc);
/* Take the 4 bits from EEPROM word 0x0F that determine the initial
* polarity value for the SW controlled pins, and setup the
@@ -760,7 +760,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
1, &eeprom_data);
if (ret_val) {
- DEBUGOUT("EEPROM Read Error\n");
+ e_dbg("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
@@ -777,8 +777,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
* control is disabled, because it does not hurt anything to
* initialize these registers.
*/
- DEBUGOUT
- ("Initializing the Flow Control address, type and timer regs\n");
+ e_dbg("Initializing the Flow Control address, type and timer regs\n");
ew32(FCT, FLOW_CONTROL_TYPE);
ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
@@ -827,7 +826,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
u32 signal = 0;
s32 ret_val;
- DEBUGFUNC("e1000_setup_fiber_serdes_link");
+ e_dbg("e1000_setup_fiber_serdes_link");
/* On adapters with a MAC newer than 82544, SWDP 1 will be
* set when the optics detect a signal. On older adapters, it will be
@@ -893,7 +892,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
break;
default:
- DEBUGOUT("Flow control param set incorrectly\n");
+ e_dbg("Flow control param set incorrectly\n");
return -E1000_ERR_CONFIG;
break;
}
@@ -904,7 +903,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
* link-up status bit will be set and the flow control enable bits (RFCE
* and TFCE) will be set according to their negotiated value.
*/
- DEBUGOUT("Auto-negotiation enabled\n");
+ e_dbg("Auto-negotiation enabled\n");
ew32(TXCW, txcw);
ew32(CTRL, ctrl);
@@ -921,7 +920,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
*/
if (hw->media_type == e1000_media_type_internal_serdes ||
(er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
- DEBUGOUT("Looking for Link\n");
+ e_dbg("Looking for Link\n");
for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
msleep(10);
status = er32(STATUS);
@@ -929,7 +928,7 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
break;
}
if (i == (LINK_UP_TIMEOUT / 10)) {
- DEBUGOUT("Never got a valid link from auto-neg!!!\n");
+ e_dbg("Never got a valid link from auto-neg!!!\n");
hw->autoneg_failed = 1;
/* AutoNeg failed to achieve a link, so we'll call
* e1000_check_for_link. This routine will force the link up if
@@ -938,16 +937,16 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
*/
ret_val = e1000_check_for_link(hw);
if (ret_val) {
- DEBUGOUT("Error while checking for link\n");
+ e_dbg("Error while checking for link\n");
return ret_val;
}
hw->autoneg_failed = 0;
} else {
hw->autoneg_failed = 0;
- DEBUGOUT("Valid Link Found\n");
+ e_dbg("Valid Link Found\n");
}
} else {
- DEBUGOUT("No Signal Detected\n");
+ e_dbg("No Signal Detected\n");
}
return E1000_SUCCESS;
}
@@ -964,7 +963,7 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;
- DEBUGFUNC("e1000_copper_link_preconfig");
+ e_dbg("e1000_copper_link_preconfig");
ctrl = er32(CTRL);
/* With 82543, we need to force speed and duplex on the MAC equal to what
@@ -987,10 +986,10 @@ static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
/* Make sure we have a valid PHY */
ret_val = e1000_detect_gig_phy(hw);
if (ret_val) {
- DEBUGOUT("Error, did not detect valid phy.\n");
+ e_dbg("Error, did not detect valid phy.\n");
return ret_val;
}
- DEBUGOUT1("Phy ID = %x\n", hw->phy_id);
+ e_dbg("Phy ID = %x\n", hw->phy_id);
/* Set PHY to class A mode (if necessary) */
ret_val = e1000_set_phy_mode(hw);
@@ -1025,14 +1024,14 @@ static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;
- DEBUGFUNC("e1000_copper_link_igp_setup");
+ e_dbg("e1000_copper_link_igp_setup");
if (hw->phy_reset_disable)
return E1000_SUCCESS;
ret_val = e1000_phy_reset(hw);
if (ret_val) {
- DEBUGOUT("Error Resetting the PHY\n");
+ e_dbg("Error Resetting the PHY\n");
return ret_val;
}
@@ -1049,7 +1048,7 @@ static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
/* disable lplu d3 during driver init */
ret_val = e1000_set_d3_lplu_state(hw, false);
if (ret_val) {
- DEBUGOUT("Error Disabling LPLU D3\n");
+ e_dbg("Error Disabling LPLU D3\n");
return ret_val;
}
}
@@ -1166,7 +1165,7 @@ static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;
- DEBUGFUNC("e1000_copper_link_mgp_setup");
+ e_dbg("e1000_copper_link_mgp_setup");
if (hw->phy_reset_disable)
return E1000_SUCCESS;
@@ -1255,7 +1254,7 @@ static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
/* SW Reset the PHY so all changes take effect */
ret_val = e1000_phy_reset(hw);
if (ret_val) {
- DEBUGOUT("Error Resetting the PHY\n");
+ e_dbg("Error Resetting the PHY\n");
return ret_val;
}
@@ -1274,7 +1273,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;
- DEBUGFUNC("e1000_copper_link_autoneg");
+ e_dbg("e1000_copper_link_autoneg");
/* Perform some bounds checking on the hw->autoneg_advertised
* parameter. If this variable is zero, then set it to the default.
@@ -1287,13 +1286,13 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
if (hw->autoneg_advertised == 0)
hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
- DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
+ e_dbg("Reconfiguring auto-neg advertisement params\n");
ret_val = e1000_phy_setup_autoneg(hw);
if (ret_val) {
- DEBUGOUT("Error Setting up Auto-Negotiation\n");
+ e_dbg("Error Setting up Auto-Negotiation\n");
return ret_val;
}
- DEBUGOUT("Restarting Auto-Neg\n");
+ e_dbg("Restarting Auto-Neg\n");
/* Restart auto-negotiation by setting the Auto Neg Enable bit and
* the Auto Neg Restart bit in the PHY control register.
@@ -1313,7 +1312,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
if (hw->wait_autoneg_complete) {
ret_val = e1000_wait_autoneg(hw);
if (ret_val) {
- DEBUGOUT
+ e_dbg
("Error while waiting for autoneg to complete\n");
return ret_val;
}
@@ -1340,20 +1339,20 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
{
s32 ret_val;
- DEBUGFUNC("e1000_copper_link_postconfig");
+ e_dbg("e1000_copper_link_postconfig");
if (hw->mac_type >= e1000_82544) {
e1000_config_collision_dist(hw);
} else {
ret_val = e1000_config_mac_to_phy(hw);
if (ret_val) {
- DEBUGOUT("Error configuring MAC to PHY settings\n");
+ e_dbg("Error configuring MAC to PHY settings\n");
return ret_val;
}
}
ret_val = e1000_config_fc_after_link_up(hw);
if (ret_val) {
- DEBUGOUT("Error Configuring Flow Control\n");
+ e_dbg("Error Configuring Flow Control\n");
return ret_val;
}
@@ -1361,7 +1360,7 @@ static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
if (hw->phy_type == e1000_phy_igp) {
ret_val = e1000_config_dsp_after_link_change(hw, true);
if (ret_val) {
- DEBUGOUT("Error Configuring DSP after link up\n");
+ e_dbg("Error Configuring DSP after link up\n");
return ret_val;
}
}
@@ -1381,7 +1380,7 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw)
u16 i;
u16 phy_data;
- DEBUGFUNC("e1000_setup_copper_link");
+ e_dbg("e1000_setup_copper_link");
/* Check if it is a valid PHY and set PHY mode if necessary. */
ret_val = e1000_copper_link_preconfig(hw);
@@ -1407,10 +1406,10 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw)
} else {
/* PHY will be set to 10H, 10F, 100H,or 100F
* depending on value from forced_speed_duplex. */
- DEBUGOUT("Forcing speed and duplex\n");
+ e_dbg("Forcing speed and duplex\n");
ret_val = e1000_phy_force_speed_duplex(hw);
if (ret_val) {
- DEBUGOUT("Error Forcing Speed and Duplex\n");
+ e_dbg("Error Forcing Speed and Duplex\n");
return ret_val;
}
}
@@ -1432,13 +1431,13 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- DEBUGOUT("Valid link established!!!\n");
+ e_dbg("Valid link established!!!\n");
return E1000_SUCCESS;
}
udelay(10);
}
- DEBUGOUT("Unable to establish link!!!\n");
+ e_dbg("Unable to establish link!!!\n");
return E1000_SUCCESS;
}
@@ -1454,7 +1453,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
u16 mii_autoneg_adv_reg;
u16 mii_1000t_ctrl_reg;
- DEBUGFUNC("e1000_phy_setup_autoneg");
+ e_dbg("e1000_phy_setup_autoneg");
/* Read the MII Auto-Neg Advertisement Register (Address 4). */
ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
@@ -1481,41 +1480,41 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
- DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised);
+ e_dbg("autoneg_advertised %x\n", hw->autoneg_advertised);
/* Do we want to advertise 10 Mb Half Duplex? */
if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
- DEBUGOUT("Advertise 10mb Half duplex\n");
+ e_dbg("Advertise 10mb Half duplex\n");
mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
}
/* Do we want to advertise 10 Mb Full Duplex? */
if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
- DEBUGOUT("Advertise 10mb Full duplex\n");
+ e_dbg("Advertise 10mb Full duplex\n");
mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
}
/* Do we want to advertise 100 Mb Half Duplex? */
if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
- DEBUGOUT("Advertise 100mb Half duplex\n");
+ e_dbg("Advertise 100mb Half duplex\n");
mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
}
/* Do we want to advertise 100 Mb Full Duplex? */
if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
- DEBUGOUT("Advertise 100mb Full duplex\n");
+ e_dbg("Advertise 100mb Full duplex\n");
mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
}
/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
- DEBUGOUT
+ e_dbg
("Advertise 1000mb Half duplex requested, request denied!\n");
}
/* Do we want to advertise 1000 Mb Full Duplex? */
if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
- DEBUGOUT("Advertise 1000mb Full duplex\n");
+ e_dbg("Advertise 1000mb Full duplex\n");
mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
}
@@ -1568,7 +1567,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
break;
default:
- DEBUGOUT("Flow control param set incorrectly\n");
+ e_dbg("Flow control param set incorrectly\n");
return -E1000_ERR_CONFIG;
}
@@ -1576,7 +1575,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+ e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
if (ret_val)
@@ -1600,12 +1599,12 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
u16 phy_data;
u16 i;
- DEBUGFUNC("e1000_phy_force_speed_duplex");
+ e_dbg("e1000_phy_force_speed_duplex");
/* Turn off Flow control if we are forcing speed and duplex. */
hw->fc = E1000_FC_NONE;
- DEBUGOUT1("hw->fc = %d\n", hw->fc);
+ e_dbg("hw->fc = %d\n", hw->fc);
/* Read the Device Control Register. */
ctrl = er32(CTRL);
@@ -1634,14 +1633,14 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
*/
ctrl |= E1000_CTRL_FD;
mii_ctrl_reg |= MII_CR_FULL_DUPLEX;
- DEBUGOUT("Full Duplex\n");
+ e_dbg("Full Duplex\n");
} else {
/* We want to force half duplex so we CLEAR the full duplex bits in
* the Device and MII Control Registers.
*/
ctrl &= ~E1000_CTRL_FD;
mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX;
- DEBUGOUT("Half Duplex\n");
+ e_dbg("Half Duplex\n");
}
/* Are we forcing 100Mbps??? */
@@ -1651,13 +1650,13 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
ctrl |= E1000_CTRL_SPD_100;
mii_ctrl_reg |= MII_CR_SPEED_100;
mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
- DEBUGOUT("Forcing 100mb ");
+ e_dbg("Forcing 100mb ");
} else {
/* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */
ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
mii_ctrl_reg |= MII_CR_SPEED_10;
mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
- DEBUGOUT("Forcing 10mb ");
+ e_dbg("Forcing 10mb ");
}
e1000_config_collision_dist(hw);
@@ -1680,7 +1679,7 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- DEBUGOUT1("M88E1000 PSCR: %x\n", phy_data);
+ e_dbg("M88E1000 PSCR: %x\n", phy_data);
/* Need to reset the PHY or these changes will be ignored */
mii_ctrl_reg |= MII_CR_RESET;
@@ -1720,7 +1719,7 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
*/
if (hw->wait_autoneg_complete) {
/* We will wait for autoneg to complete. */
- DEBUGOUT("Waiting for forced speed/duplex link.\n");
+ e_dbg("Waiting for forced speed/duplex link.\n");
mii_status_reg = 0;
/* We will wait for autoneg to complete or 4.5 seconds to expire. */
@@ -1746,7 +1745,7 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
/* We didn't get link. Reset the DSP and wait again for link. */
ret_val = e1000_phy_reset_dsp(hw);
if (ret_val) {
- DEBUGOUT("Error Resetting PHY DSP\n");
+ e_dbg("Error Resetting PHY DSP\n");
return ret_val;
}
}
@@ -1826,7 +1825,7 @@ void e1000_config_collision_dist(struct e1000_hw *hw)
{
u32 tctl, coll_dist;
- DEBUGFUNC("e1000_config_collision_dist");
+ e_dbg("e1000_config_collision_dist");
if (hw->mac_type < e1000_82543)
coll_dist = E1000_COLLISION_DISTANCE_82542;
@@ -1857,7 +1856,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;
- DEBUGFUNC("e1000_config_mac_to_phy");
+ e_dbg("e1000_config_mac_to_phy");
/* 82544 or newer MAC, Auto Speed Detection takes care of
* MAC speed/duplex configuration.*/
@@ -1913,7 +1912,7 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw)
{
u32 ctrl;
- DEBUGFUNC("e1000_force_mac_fc");
+ e_dbg("e1000_force_mac_fc");
/* Get the current configuration of the Device Control Register */
ctrl = er32(CTRL);
@@ -1952,7 +1951,7 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw)
ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
break;
default:
- DEBUGOUT("Flow control param set incorrectly\n");
+ e_dbg("Flow control param set incorrectly\n");
return -E1000_ERR_CONFIG;
}
@@ -1984,7 +1983,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
u16 speed;
u16 duplex;
- DEBUGFUNC("e1000_config_fc_after_link_up");
+ e_dbg("e1000_config_fc_after_link_up");
/* Check for the case where we have fiber media and auto-neg failed
* so we had to force link. In this case, we need to force the
@@ -1997,7 +1996,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
&& (!hw->autoneg))) {
ret_val = e1000_force_mac_fc(hw);
if (ret_val) {
- DEBUGOUT("Error forcing flow control settings\n");
+ e_dbg("Error forcing flow control settings\n");
return ret_val;
}
}
@@ -2079,10 +2078,10 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
*/
if (hw->original_fc == E1000_FC_FULL) {
hw->fc = E1000_FC_FULL;
- DEBUGOUT("Flow Control = FULL.\n");
+ e_dbg("Flow Control = FULL.\n");
} else {
hw->fc = E1000_FC_RX_PAUSE;
- DEBUGOUT
+ e_dbg
("Flow Control = RX PAUSE frames only.\n");
}
}
@@ -2100,7 +2099,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
{
hw->fc = E1000_FC_TX_PAUSE;
- DEBUGOUT
+ e_dbg
("Flow Control = TX PAUSE frames only.\n");
}
/* For transmitting PAUSE frames ONLY.
@@ -2117,7 +2116,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
(mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
{
hw->fc = E1000_FC_RX_PAUSE;
- DEBUGOUT
+ e_dbg
("Flow Control = RX PAUSE frames only.\n");
}
/* Per the IEEE spec, at this point flow control should be
@@ -2144,10 +2143,10 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
hw->original_fc == E1000_FC_TX_PAUSE) ||
hw->fc_strict_ieee) {
hw->fc = E1000_FC_NONE;
- DEBUGOUT("Flow Control = NONE.\n");
+ e_dbg("Flow Control = NONE.\n");
} else {
hw->fc = E1000_FC_RX_PAUSE;
- DEBUGOUT
+ e_dbg
("Flow Control = RX PAUSE frames only.\n");
}
@@ -2158,7 +2157,7 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
ret_val =
e1000_get_speed_and_duplex(hw, &speed, &duplex);
if (ret_val) {
- DEBUGOUT
+ e_dbg
("Error getting link speed and duplex\n");
return ret_val;
}
@@ -2171,12 +2170,12 @@ static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
*/
ret_val = e1000_force_mac_fc(hw);
if (ret_val) {
- DEBUGOUT
+ e_dbg
("Error forcing flow control settings\n");
return ret_val;
}
} else {
- DEBUGOUT
+ e_dbg
("Copper PHY and Auto Neg has not completed.\n");
}
}
@@ -2197,7 +2196,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
u32 status;
s32 ret_val = E1000_SUCCESS;
- DEBUGFUNC("e1000_check_for_serdes_link_generic");
+ e_dbg("e1000_check_for_serdes_link_generic");
ctrl = er32(CTRL);
status = er32(STATUS);
@@ -2216,7 +2215,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
hw->autoneg_failed = 1;
goto out;
}
- DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
+ e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
/* Disable auto-negotiation in the TXCW register */
ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
@@ -2229,7 +2228,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
/* Configure Flow Control after forcing link up. */
ret_val = e1000_config_fc_after_link_up(hw);
if (ret_val) {
- DEBUGOUT("Error configuring flow control\n");
+ e_dbg("Error configuring flow control\n");
goto out;
}
} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
@@ -2239,7 +2238,7 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
* and disable forced link in the Device Control register
* in an attempt to auto-negotiate with our link partner.
*/
- DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
+ e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
ew32(TXCW, hw->txcw);
ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
@@ -2256,11 +2255,11 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
if (rxcw & E1000_RXCW_SYNCH) {
if (!(rxcw & E1000_RXCW_IV)) {
hw->serdes_has_link = true;
- DEBUGOUT("SERDES: Link up - forced.\n");
+ e_dbg("SERDES: Link up - forced.\n");
}
} else {
hw->serdes_has_link = false;
- DEBUGOUT("SERDES: Link down - force failed.\n");
+ e_dbg("SERDES: Link down - force failed.\n");
}
}
@@ -2273,20 +2272,20 @@ static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
if (rxcw & E1000_RXCW_SYNCH) {
if (!(rxcw & E1000_RXCW_IV)) {
hw->serdes_has_link = true;
- DEBUGOUT("SERDES: Link up - autoneg "
+ e_dbg("SERDES: Link up - autoneg "
"completed successfully.\n");
} else {
hw->serdes_has_link = false;
- DEBUGOUT("SERDES: Link down - invalid"
+ e_dbg("SERDES: Link down - invalid"
"codewords detected in autoneg.\n");
}
} else {
hw->serdes_has_link = false;
- DEBUGOUT("SERDES: Link down - no sync.\n");
+ e_dbg("SERDES: Link down - no sync.\n");
}
} else {
hw->serdes_has_link = false;
- DEBUGOUT("SERDES: Link down - autoneg failed\n");
+ e_dbg("SERDES: Link down - autoneg failed\n");
}
}
@@ -2312,7 +2311,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;
- DEBUGFUNC("e1000_check_for_link");
+ e_dbg("e1000_check_for_link");
ctrl = er32(CTRL);
status = er32(STATUS);
@@ -2407,7 +2406,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
else {
ret_val = e1000_config_mac_to_phy(hw);
if (ret_val) {
- DEBUGOUT
+ e_dbg
("Error configuring MAC to PHY settings\n");
return ret_val;
}
@@ -2419,7 +2418,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
*/
ret_val = e1000_config_fc_after_link_up(hw);
if (ret_val) {
- DEBUGOUT("Error configuring flow control\n");
+ e_dbg("Error configuring flow control\n");
return ret_val;
}
@@ -2435,7 +2434,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
ret_val =
e1000_get_speed_and_duplex(hw, &speed, &duplex);
if (ret_val) {
- DEBUGOUT
+ e_dbg
("Error getting link speed and duplex\n");
return ret_val;
}
@@ -2487,30 +2486,30 @@ s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
s32 ret_val;
u16 phy_data;
- DEBUGFUNC("e1000_get_speed_and_duplex");
+ e_dbg("e1000_get_speed_and_duplex");
if (hw->mac_type >= e1000_82543) {
status = er32(STATUS);
if (status & E1000_STATUS_SPEED_1000) {
*speed = SPEED_1000;
- DEBUGOUT("1000 Mbs, ");
+ e_dbg("1000 Mbs, ");
} else if (status & E1000_STATUS_SPEED_100) {
*speed = SPEED_100;
- DEBUGOUT("100 Mbs, ");
+ e_dbg("100 Mbs, ");
} else {
*speed = SPEED_10;
- DEBUGOUT("10 Mbs, ");
+ e_dbg("10 Mbs, ");
}
if (status & E1000_STATUS_FD) {
*duplex = FULL_DUPLEX;
- DEBUGOUT("Full Duplex\n");
+ e_dbg("Full Duplex\n");
} else {
*duplex = HALF_DUPLEX;
- DEBUGOUT(" Half Duplex\n");
+ e_dbg(" Half Duplex\n");
}
} else {
- DEBUGOUT("1000 Mbs, Full Duplex\n");
+ e_dbg("1000 Mbs, Full Duplex\n");
*speed = SPEED_1000;
*duplex = FULL_DUPLEX;
}
@@ -2554,8 +2553,8 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw)
u16 i;
u16 phy_data;
- DEBUGFUNC("e1000_wait_autoneg");
- DEBUGOUT("Waiting for Auto-Neg to complete.\n");
+ e_dbg("e1000_wait_autoneg");
+ e_dbg("Waiting for Auto-Neg to complete.\n");
/* We will wait for autoneg to complete or 4.5 seconds to expire. */
for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
@@ -2718,7 +2717,7 @@ s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
{
u32 ret_val;
- DEBUGFUNC("e1000_read_phy_reg");
+ e_dbg("e1000_read_phy_reg");
if ((hw->phy_type == e1000_phy_igp) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
@@ -2741,10 +2740,10 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
u32 mdic = 0;
const u32 phy_addr = 1;
- DEBUGFUNC("e1000_read_phy_reg_ex");
+ e_dbg("e1000_read_phy_reg_ex");
if (reg_addr > MAX_PHY_REG_ADDRESS) {
- DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ e_dbg("PHY Address %d is out of range\n", reg_addr);
return -E1000_ERR_PARAM;
}
@@ -2767,11 +2766,11 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
break;
}
if (!(mdic & E1000_MDIC_READY)) {
- DEBUGOUT("MDI Read did not complete\n");
+ e_dbg("MDI Read did not complete\n");
return -E1000_ERR_PHY;
}
if (mdic & E1000_MDIC_ERROR) {
- DEBUGOUT("MDI Error\n");
+ e_dbg("MDI Error\n");
return -E1000_ERR_PHY;
}
*phy_data = (u16) mdic;
@@ -2820,7 +2819,7 @@ s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
{
u32 ret_val;
- DEBUGFUNC("e1000_write_phy_reg");
+ e_dbg("e1000_write_phy_reg");
if ((hw->phy_type == e1000_phy_igp) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
@@ -2843,10 +2842,10 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
u32 mdic = 0;
const u32 phy_addr = 1;
- DEBUGFUNC("e1000_write_phy_reg_ex");
+ e_dbg("e1000_write_phy_reg_ex");
if (reg_addr > MAX_PHY_REG_ADDRESS) {
- DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ e_dbg("PHY Address %d is out of range\n", reg_addr);
return -E1000_ERR_PARAM;
}
@@ -2870,7 +2869,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
break;
}
if (!(mdic & E1000_MDIC_READY)) {
- DEBUGOUT("MDI Write did not complete\n");
+ e_dbg("MDI Write did not complete\n");
return -E1000_ERR_PHY;
}
} else {
@@ -2910,9 +2909,9 @@ s32 e1000_phy_hw_reset(struct e1000_hw *hw)
u32 led_ctrl;
s32 ret_val;
- DEBUGFUNC("e1000_phy_hw_reset");
+ e_dbg("e1000_phy_hw_reset");
- DEBUGOUT("Resetting Phy...\n");
+ e_dbg("Resetting Phy...\n");
if (hw->mac_type > e1000_82543) {
/* Read the device control register and assert the E1000_CTRL_PHY_RST
@@ -2973,7 +2972,7 @@ s32 e1000_phy_reset(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;
- DEBUGFUNC("e1000_phy_reset");
+ e_dbg("e1000_phy_reset");
switch (hw->phy_type) {
case e1000_phy_igp:
@@ -3013,7 +3012,7 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
u16 phy_id_high, phy_id_low;
bool match = false;
- DEBUGFUNC("e1000_detect_gig_phy");
+ e_dbg("e1000_detect_gig_phy");
if (hw->phy_id != 0)
return E1000_SUCCESS;
@@ -3057,16 +3056,16 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
match = true;
break;
default:
- DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
+ e_dbg("Invalid MAC type %d\n", hw->mac_type);
return -E1000_ERR_CONFIG;
}
phy_init_status = e1000_set_phy_type(hw);
if ((match) && (phy_init_status == E1000_SUCCESS)) {
- DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id);
+ e_dbg("PHY ID 0x%X detected\n", hw->phy_id);
return E1000_SUCCESS;
}
- DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id);
+ e_dbg("Invalid PHY ID 0x%X\n", hw->phy_id);
return -E1000_ERR_PHY;
}
@@ -3079,7 +3078,7 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
static s32 e1000_phy_reset_dsp(struct e1000_hw *hw)
{
s32 ret_val;
- DEBUGFUNC("e1000_phy_reset_dsp");
+ e_dbg("e1000_phy_reset_dsp");
do {
ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
@@ -3111,7 +3110,7 @@ static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
u16 phy_data, min_length, max_length, average;
e1000_rev_polarity polarity;
- DEBUGFUNC("e1000_phy_igp_get_info");
+ e_dbg("e1000_phy_igp_get_info");
/* The downshift status is checked only once, after link is established,
* and it stored in the hw->speed_downgraded parameter. */
@@ -3189,7 +3188,7 @@ static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
u16 phy_data;
e1000_rev_polarity polarity;
- DEBUGFUNC("e1000_phy_m88_get_info");
+ e_dbg("e1000_phy_m88_get_info");
/* The downshift status is checked only once, after link is established,
* and it stored in the hw->speed_downgraded parameter. */
@@ -3261,7 +3260,7 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
s32 ret_val;
u16 phy_data;
- DEBUGFUNC("e1000_phy_get_info");
+ e_dbg("e1000_phy_get_info");
phy_info->cable_length = e1000_cable_length_undefined;
phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined;
@@ -3273,7 +3272,7 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
phy_info->remote_rx = e1000_1000t_rx_status_undefined;
if (hw->media_type != e1000_media_type_copper) {
- DEBUGOUT("PHY info is only valid for copper media\n");
+ e_dbg("PHY info is only valid for copper media\n");
return -E1000_ERR_CONFIG;
}
@@ -3286,7 +3285,7 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
return ret_val;
if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
- DEBUGOUT("PHY info is only valid if link is up\n");
+ e_dbg("PHY info is only valid if link is up\n");
return -E1000_ERR_CONFIG;
}
@@ -3298,10 +3297,10 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_validate_mdi_settings");
+ e_dbg("e1000_validate_mdi_settings");
if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
- DEBUGOUT("Invalid MDI setting detected\n");
+ e_dbg("Invalid MDI setting detected\n");
hw->mdix = 1;
return -E1000_ERR_CONFIG;
}
@@ -3322,7 +3321,7 @@ s32 e1000_init_eeprom_params(struct e1000_hw *hw)
s32 ret_val = E1000_SUCCESS;
u16 eeprom_size;
- DEBUGFUNC("e1000_init_eeprom_params");
+ e_dbg("e1000_init_eeprom_params");
switch (hw->mac_type) {
case e1000_82542_rev2_0:
@@ -3539,7 +3538,7 @@ static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
struct e1000_eeprom_info *eeprom = &hw->eeprom;
u32 eecd, i = 0;
- DEBUGFUNC("e1000_acquire_eeprom");
+ e_dbg("e1000_acquire_eeprom");
eecd = er32(EECD);
@@ -3557,7 +3556,7 @@ static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
if (!(eecd & E1000_EECD_GNT)) {
eecd &= ~E1000_EECD_REQ;
ew32(EECD, eecd);
- DEBUGOUT("Could not acquire EEPROM grant\n");
+ e_dbg("Could not acquire EEPROM grant\n");
return -E1000_ERR_EEPROM;
}
}
@@ -3639,7 +3638,7 @@ static void e1000_release_eeprom(struct e1000_hw *hw)
{
u32 eecd;
- DEBUGFUNC("e1000_release_eeprom");
+ e_dbg("e1000_release_eeprom");
eecd = er32(EECD);
@@ -3687,7 +3686,7 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
u16 retry_count = 0;
u8 spi_stat_reg;
- DEBUGFUNC("e1000_spi_eeprom_ready");
+ e_dbg("e1000_spi_eeprom_ready");
/* Read "Status Register" repeatedly until the LSB is cleared. The
* EEPROM will signal that the command has been completed by clearing
@@ -3712,7 +3711,7 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
* only 0-5mSec on 5V devices)
*/
if (retry_count >= EEPROM_MAX_RETRY_SPI) {
- DEBUGOUT("SPI EEPROM Status error\n");
+ e_dbg("SPI EEPROM Status error\n");
return -E1000_ERR_EEPROM;
}
@@ -3741,7 +3740,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
struct e1000_eeprom_info *eeprom = &hw->eeprom;
u32 i = 0;
- DEBUGFUNC("e1000_read_eeprom");
+ e_dbg("e1000_read_eeprom");
/* If eeprom is not yet detected, do so now */
if (eeprom->word_size == 0)
@@ -3752,9 +3751,8 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
*/
if ((offset >= eeprom->word_size)
|| (words > eeprom->word_size - offset) || (words == 0)) {
- DEBUGOUT2
- ("\"words\" parameter out of bounds. Words = %d, size = %d\n",
- offset, eeprom->word_size);
+ e_dbg("\"words\" parameter out of bounds. Words = %d,"
+ "size = %d\n", offset, eeprom->word_size);
return -E1000_ERR_EEPROM;
}
@@ -3832,11 +3830,11 @@ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
u16 checksum = 0;
u16 i, eeprom_data;
- DEBUGFUNC("e1000_validate_eeprom_checksum");
+ e_dbg("e1000_validate_eeprom_checksum");
for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
- DEBUGOUT("EEPROM Read Error\n");
+ e_dbg("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
checksum += eeprom_data;
@@ -3845,7 +3843,7 @@ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
if (checksum == (u16) EEPROM_SUM)
return E1000_SUCCESS;
else {
- DEBUGOUT("EEPROM Checksum Invalid\n");
+ e_dbg("EEPROM Checksum Invalid\n");
return -E1000_ERR_EEPROM;
}
}
@@ -3862,18 +3860,18 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
u16 checksum = 0;
u16 i, eeprom_data;
- DEBUGFUNC("e1000_update_eeprom_checksum");
+ e_dbg("e1000_update_eeprom_checksum");
for (i = 0; i < EEPROM_CHECKSUM_REG; i++) {
if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
- DEBUGOUT("EEPROM Read Error\n");
+ e_dbg("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
checksum += eeprom_data;
}
checksum = (u16) EEPROM_SUM - checksum;
if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
- DEBUGOUT("EEPROM Write Error\n");
+ e_dbg("EEPROM Write Error\n");
return -E1000_ERR_EEPROM;
}
return E1000_SUCCESS;
@@ -3904,7 +3902,7 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
struct e1000_eeprom_info *eeprom = &hw->eeprom;
s32 status = 0;
- DEBUGFUNC("e1000_write_eeprom");
+ e_dbg("e1000_write_eeprom");
/* If eeprom is not yet detected, do so now */
if (eeprom->word_size == 0)
@@ -3915,7 +3913,7 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
*/
if ((offset >= eeprom->word_size)
|| (words > eeprom->word_size - offset) || (words == 0)) {
- DEBUGOUT("\"words\" parameter out of bounds\n");
+ e_dbg("\"words\" parameter out of bounds\n");
return -E1000_ERR_EEPROM;
}
@@ -3949,7 +3947,7 @@ static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
struct e1000_eeprom_info *eeprom = &hw->eeprom;
u16 widx = 0;
- DEBUGFUNC("e1000_write_eeprom_spi");
+ e_dbg("e1000_write_eeprom_spi");
while (widx < words) {
u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
@@ -4013,7 +4011,7 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
u16 words_written = 0;
u16 i = 0;
- DEBUGFUNC("e1000_write_eeprom_microwire");
+ e_dbg("e1000_write_eeprom_microwire");
/* Send the write enable command to the EEPROM (3-bit opcode plus
* 6/8-bit dummy address beginning with 11). It's less work to include
@@ -4056,7 +4054,7 @@ static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
udelay(50);
}
if (i == 200) {
- DEBUGOUT("EEPROM Write did not complete\n");
+ e_dbg("EEPROM Write did not complete\n");
return -E1000_ERR_EEPROM;
}
@@ -4092,12 +4090,12 @@ s32 e1000_read_mac_addr(struct e1000_hw *hw)
u16 offset;
u16 eeprom_data, i;
- DEBUGFUNC("e1000_read_mac_addr");
+ e_dbg("e1000_read_mac_addr");
for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
offset = i >> 1;
if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
- DEBUGOUT("EEPROM Read Error\n");
+ e_dbg("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF);
@@ -4132,17 +4130,17 @@ static void e1000_init_rx_addrs(struct e1000_hw *hw)
u32 i;
u32 rar_num;
- DEBUGFUNC("e1000_init_rx_addrs");
+ e_dbg("e1000_init_rx_addrs");
/* Setup the receive address. */
- DEBUGOUT("Programming MAC Address into RAR[0]\n");
+ e_dbg("Programming MAC Address into RAR[0]\n");
e1000_rar_set(hw, hw->mac_addr, 0);
rar_num = E1000_RAR_ENTRIES;
/* Zero out the other 15 receive addresses. */
- DEBUGOUT("Clearing RAR[1-15]\n");
+ e_dbg("Clearing RAR[1-15]\n");
for (i = 1; i < rar_num; i++) {
E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
E1000_WRITE_FLUSH();
@@ -4290,7 +4288,7 @@ static s32 e1000_id_led_init(struct e1000_hw *hw)
u16 eeprom_data, i, temp;
const u16 led_mask = 0x0F;
- DEBUGFUNC("e1000_id_led_init");
+ e_dbg("e1000_id_led_init");
if (hw->mac_type < e1000_82540) {
/* Nothing to do */
@@ -4303,7 +4301,7 @@ static s32 e1000_id_led_init(struct e1000_hw *hw)
hw->ledctl_mode2 = hw->ledctl_default;
if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
- DEBUGOUT("EEPROM Read Error\n");
+ e_dbg("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
@@ -4363,7 +4361,7 @@ s32 e1000_setup_led(struct e1000_hw *hw)
u32 ledctl;
s32 ret_val = E1000_SUCCESS;
- DEBUGFUNC("e1000_setup_led");
+ e_dbg("e1000_setup_led");
switch (hw->mac_type) {
case e1000_82542_rev2_0:
@@ -4415,7 +4413,7 @@ s32 e1000_cleanup_led(struct e1000_hw *hw)
{
s32 ret_val = E1000_SUCCESS;
- DEBUGFUNC("e1000_cleanup_led");
+ e_dbg("e1000_cleanup_led");
switch (hw->mac_type) {
case e1000_82542_rev2_0:
@@ -4451,7 +4449,7 @@ s32 e1000_led_on(struct e1000_hw *hw)
{
u32 ctrl = er32(CTRL);
- DEBUGFUNC("e1000_led_on");
+ e_dbg("e1000_led_on");
switch (hw->mac_type) {
case e1000_82542_rev2_0:
@@ -4497,7 +4495,7 @@ s32 e1000_led_off(struct e1000_hw *hw)
{
u32 ctrl = er32(CTRL);
- DEBUGFUNC("e1000_led_off");
+ e_dbg("e1000_led_off");
switch (hw->mac_type) {
case e1000_82542_rev2_0:
@@ -4626,7 +4624,7 @@ static void e1000_clear_hw_cntrs(struct e1000_hw *hw)
*/
void e1000_reset_adaptive(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_reset_adaptive");
+ e_dbg("e1000_reset_adaptive");
if (hw->adaptive_ifs) {
if (!hw->ifs_params_forced) {
@@ -4639,7 +4637,7 @@ void e1000_reset_adaptive(struct e1000_hw *hw)
hw->in_ifs_mode = false;
ew32(AIT, 0);
} else {
- DEBUGOUT("Not in Adaptive IFS mode!\n");
+ e_dbg("Not in Adaptive IFS mode!\n");
}
}
@@ -4654,7 +4652,7 @@ void e1000_reset_adaptive(struct e1000_hw *hw)
*/
void e1000_update_adaptive(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_update_adaptive");
+ e_dbg("e1000_update_adaptive");
if (hw->adaptive_ifs) {
if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) {
@@ -4679,7 +4677,7 @@ void e1000_update_adaptive(struct e1000_hw *hw)
}
}
} else {
- DEBUGOUT("Not in Adaptive IFS mode!\n");
+ e_dbg("Not in Adaptive IFS mode!\n");
}
}
@@ -4851,7 +4849,7 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
u16 i, phy_data;
u16 cable_length;
- DEBUGFUNC("e1000_get_cable_length");
+ e_dbg("e1000_get_cable_length");
*min_length = *max_length = 0;
@@ -4968,7 +4966,7 @@ static s32 e1000_check_polarity(struct e1000_hw *hw,
s32 ret_val;
u16 phy_data;
- DEBUGFUNC("e1000_check_polarity");
+ e_dbg("e1000_check_polarity");
if (hw->phy_type == e1000_phy_m88) {
/* return the Polarity bit in the Status register. */
@@ -5034,7 +5032,7 @@ static s32 e1000_check_downshift(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;
- DEBUGFUNC("e1000_check_downshift");
+ e_dbg("e1000_check_downshift");
if (hw->phy_type == e1000_phy_igp) {
ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
@@ -5081,7 +5079,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
};
u16 min_length, max_length;
- DEBUGFUNC("e1000_config_dsp_after_link_change");
+ e_dbg("e1000_config_dsp_after_link_change");
if (hw->phy_type != e1000_phy_igp)
return E1000_SUCCESS;
@@ -5089,7 +5087,7 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
if (link_up) {
ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
if (ret_val) {
- DEBUGOUT("Error getting link speed and duplex\n");
+ e_dbg("Error getting link speed and duplex\n");
return ret_val;
}
@@ -5289,7 +5287,7 @@ static s32 e1000_set_phy_mode(struct e1000_hw *hw)
s32 ret_val;
u16 eeprom_data;
- DEBUGFUNC("e1000_set_phy_mode");
+ e_dbg("e1000_set_phy_mode");
if ((hw->mac_type == e1000_82545_rev_3) &&
(hw->media_type == e1000_media_type_copper)) {
@@ -5337,7 +5335,7 @@ static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
{
s32 ret_val;
u16 phy_data;
- DEBUGFUNC("e1000_set_d3_lplu_state");
+ e_dbg("e1000_set_d3_lplu_state");
if (hw->phy_type != e1000_phy_igp)
return E1000_SUCCESS;
@@ -5440,7 +5438,7 @@ static s32 e1000_set_vco_speed(struct e1000_hw *hw)
u16 default_page = 0;
u16 phy_data;
- DEBUGFUNC("e1000_set_vco_speed");
+ e_dbg("e1000_set_vco_speed");
switch (hw->mac_type) {
case e1000_82545_rev_3:
@@ -5613,7 +5611,7 @@ static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw)
*/
static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_get_auto_rd_done");
+ e_dbg("e1000_get_auto_rd_done");
msleep(5);
return E1000_SUCCESS;
}
@@ -5628,7 +5626,7 @@ static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
*/
static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_get_phy_cfg_done");
+ e_dbg("e1000_get_phy_cfg_done");
mdelay(10);
return E1000_SUCCESS;
}
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 9acfddb0dafb..ecd9f6c6bcd5 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -35,6 +35,7 @@
#include "e1000_osdep.h"
+
/* Forward declarations of structures used by the shared code */
struct e1000_hw;
struct e1000_hw_stats;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 0a56e7d1f33b..e6ebc222459f 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -214,6 +214,17 @@ module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
/**
+ * e1000_get_hw_dev - return device
+ * used by hardware layer to print debugging information
+ *
+ **/
+struct net_device *e1000_get_hw_dev(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+ return adapter->netdev;
+}
+
+/**
* e1000_init_module - Driver Registration Routine
*
* e1000_init_module is the first routine called when the driver is
@@ -223,18 +234,17 @@ MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
static int __init e1000_init_module(void)
{
int ret;
- printk(KERN_INFO "%s - version %s\n",
- e1000_driver_string, e1000_driver_version);
+ pr_info("%s - version %s\n", e1000_driver_string, e1000_driver_version);
- printk(KERN_INFO "%s\n", e1000_copyright);
+ pr_info("%s\n", e1000_copyright);
ret = pci_register_driver(&e1000_driver);
if (copybreak != COPYBREAK_DEFAULT) {
if (copybreak == 0)
- printk(KERN_INFO "e1000: copybreak disabled\n");
+ pr_info("copybreak disabled\n");
else
- printk(KERN_INFO "e1000: copybreak enabled for "
- "packets <= %u bytes\n", copybreak);
+ pr_info("copybreak enabled for "
+ "packets <= %u bytes\n", copybreak);
}
return ret;
}
@@ -265,8 +275,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
netdev);
if (err) {
- DPRINTK(PROBE, ERR,
- "Unable to allocate interrupt Error: %d\n", err);
+ e_err("Unable to allocate interrupt Error: %d\n", err);
}
return err;
@@ -648,7 +657,7 @@ void e1000_reset(struct e1000_adapter *adapter)
ew32(WUC, 0);
if (e1000_init_hw(hw))
- DPRINTK(PROBE, ERR, "Hardware Error\n");
+ e_err("Hardware Error\n");
e1000_update_mng_vlan(adapter);
/* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
@@ -689,8 +698,7 @@ static void e1000_dump_eeprom(struct e1000_adapter *adapter)
data = kmalloc(eeprom.len, GFP_KERNEL);
if (!data) {
- printk(KERN_ERR "Unable to allocate memory to dump EEPROM"
- " data\n");
+ pr_err("Unable to allocate memory to dump EEPROM data\n");
return;
}
@@ -702,30 +710,25 @@ static void e1000_dump_eeprom(struct e1000_adapter *adapter)
csum_new += data[i] + (data[i + 1] << 8);
csum_new = EEPROM_SUM - csum_new;
- printk(KERN_ERR "/*********************/\n");
- printk(KERN_ERR "Current EEPROM Checksum : 0x%04x\n", csum_old);
- printk(KERN_ERR "Calculated : 0x%04x\n", csum_new);
+ pr_err("/*********************/\n");
+ pr_err("Current EEPROM Checksum : 0x%04x\n", csum_old);
+ pr_err("Calculated : 0x%04x\n", csum_new);
- printk(KERN_ERR "Offset Values\n");
- printk(KERN_ERR "======== ======\n");
+ pr_err("Offset Values\n");
+ pr_err("======== ======\n");
print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);
- printk(KERN_ERR "Include this output when contacting your support "
- "provider.\n");
- printk(KERN_ERR "This is not a software error! Something bad "
- "happened to your hardware or\n");
- printk(KERN_ERR "EEPROM image. Ignoring this "
- "problem could result in further problems,\n");
- printk(KERN_ERR "possibly loss of data, corruption or system hangs!\n");
- printk(KERN_ERR "The MAC Address will be reset to 00:00:00:00:00:00, "
- "which is invalid\n");
- printk(KERN_ERR "and requires you to set the proper MAC "
- "address manually before continuing\n");
- printk(KERN_ERR "to enable this network device.\n");
- printk(KERN_ERR "Please inspect the EEPROM dump and report the issue "
- "to your hardware vendor\n");
- printk(KERN_ERR "or Intel Customer Support.\n");
- printk(KERN_ERR "/*********************/\n");
+ pr_err("Include this output when contacting your support provider.\n");
+ pr_err("This is not a software error! Something bad happened to\n");
+ pr_err("your hardware or EEPROM image. Ignoring this problem could\n");
+ pr_err("result in further problems, possibly loss of data,\n");
+ pr_err("corruption or system hangs!\n");
+ pr_err("The MAC Address will be reset to 00:00:00:00:00:00,\n");
+ pr_err("which is invalid and requires you to set the proper MAC\n");
+ pr_err("address manually before continuing to enable this network\n");
+ pr_err("device. Please inspect the EEPROM dump and report the\n");
+ pr_err("issue to your hardware vendor or Intel Customer Support.\n");
+ pr_err("/*********************/\n");
kfree(data);
}
@@ -832,8 +835,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
if (err) {
- E1000_ERR("No usable DMA configuration, "
- "aborting\n");
+ pr_err("No usable DMA config, aborting\n");
goto err_dma;
}
}
@@ -923,7 +925,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* initialize eeprom parameters */
if (e1000_init_eeprom_params(hw)) {
- E1000_ERR("EEPROM initialization failed\n");
+ e_err("EEPROM initialization failed\n");
goto err_eeprom;
}
@@ -934,7 +936,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* make sure the EEPROM is good */
if (e1000_validate_eeprom_checksum(hw) < 0) {
- DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
+ e_err("The EEPROM Checksum Is Not Valid\n");
e1000_dump_eeprom(adapter);
/*
* set MAC address to all zeroes to invalidate and temporary
@@ -948,14 +950,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
} else {
/* copy the MAC address out of the EEPROM */
if (e1000_read_mac_addr(hw))
- DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
+ e_err("EEPROM Read Error\n");
}
/* don't block initalization here due to bad MAC address */
memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->perm_addr))
- DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
+ e_err("Invalid MAC Address\n");
e1000_get_bus_info(hw);
@@ -1036,8 +1038,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
adapter->wol = adapter->eeprom_wol;
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+ /* reset the hardware with the new settings */
+ e1000_reset(adapter);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
/* print bus type/speed/width info */
- DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
+ e_info("(PCI%s:%s:%s) ",
((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
((hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
(hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
@@ -1045,20 +1055,12 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
(hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
((hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit"));
- printk("%pM\n", netdev->dev_addr);
-
- /* reset the hardware with the new settings */
- e1000_reset(adapter);
-
- strcpy(netdev->name, "eth%d");
- err = register_netdev(netdev);
- if (err)
- goto err_register;
+ e_info("%pM\n", netdev->dev_addr);
/* carrier off reporting is important to ethtool even BEFORE open */
netif_carrier_off(netdev);
- DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
+ e_info("Intel(R) PRO/1000 Network Connection\n");
cards_found++;
return 0;
@@ -1158,7 +1160,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
/* identify the MAC */
if (e1000_set_mac_type(hw)) {
- DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
+ e_err("Unknown MAC Type\n");
return -EIO;
}
@@ -1191,7 +1193,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
adapter->num_rx_queues = 1;
if (e1000_alloc_queues(adapter)) {
- DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+ e_err("Unable to allocate memory for queues\n");
return -ENOMEM;
}
@@ -1385,8 +1387,7 @@ static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
size = sizeof(struct e1000_buffer) * txdr->count;
txdr->buffer_info = vmalloc(size);
if (!txdr->buffer_info) {
- DPRINTK(PROBE, ERR,
- "Unable to allocate memory for the transmit descriptor ring\n");
+ e_err("Unable to allocate memory for the Tx descriptor ring\n");
return -ENOMEM;
}
memset(txdr->buffer_info, 0, size);
@@ -1401,8 +1402,7 @@ static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
if (!txdr->desc) {
setup_tx_desc_die:
vfree(txdr->buffer_info);
- DPRINTK(PROBE, ERR,
- "Unable to allocate memory for the transmit descriptor ring\n");
+ e_err("Unable to allocate memory for the Tx descriptor ring\n");
return -ENOMEM;
}
@@ -1410,8 +1410,8 @@ setup_tx_desc_die:
if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
void *olddesc = txdr->desc;
dma_addr_t olddma = txdr->dma;
- DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
- "at %p\n", txdr->size, txdr->desc);
+ e_err("txdr align check failed: %u bytes at %p\n",
+ txdr->size, txdr->desc);
/* Try again, without freeing the previous */
txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size,
&txdr->dma, GFP_KERNEL);
@@ -1428,9 +1428,8 @@ setup_tx_desc_die:
txdr->dma);
dma_free_coherent(&pdev->dev, txdr->size, olddesc,
olddma);
- DPRINTK(PROBE, ERR,
- "Unable to allocate aligned memory "
- "for the transmit descriptor ring\n");
+ e_err("Unable to allocate aligned memory "
+ "for the transmit descriptor ring\n");
vfree(txdr->buffer_info);
return -ENOMEM;
} else {
@@ -1462,8 +1461,7 @@ int e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
for (i = 0; i < adapter->num_tx_queues; i++) {
err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
if (err) {
- DPRINTK(PROBE, ERR,
- "Allocation for Tx Queue %u failed\n", i);
+ e_err("Allocation for Tx Queue %u failed\n", i);
for (i-- ; i >= 0; i--)
e1000_free_tx_resources(adapter,
&adapter->tx_ring[i]);
@@ -1583,8 +1581,7 @@ static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
size = sizeof(struct e1000_buffer) * rxdr->count;
rxdr->buffer_info = vmalloc(size);
if (!rxdr->buffer_info) {
- DPRINTK(PROBE, ERR,
- "Unable to allocate memory for the receive descriptor ring\n");
+ e_err("Unable to allocate memory for the Rx descriptor ring\n");
return -ENOMEM;
}
memset(rxdr->buffer_info, 0, size);
@@ -1600,8 +1597,7 @@ static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
GFP_KERNEL);
if (!rxdr->desc) {
- DPRINTK(PROBE, ERR,
- "Unable to allocate memory for the receive descriptor ring\n");
+ e_err("Unable to allocate memory for the Rx descriptor ring\n");
setup_rx_desc_die:
vfree(rxdr->buffer_info);
return -ENOMEM;
@@ -1611,8 +1607,8 @@ setup_rx_desc_die:
if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
void *olddesc = rxdr->desc;
dma_addr_t olddma = rxdr->dma;
- DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
- "at %p\n", rxdr->size, rxdr->desc);
+ e_err("rxdr align check failed: %u bytes at %p\n",
+ rxdr->size, rxdr->desc);
/* Try again, without freeing the previous */
rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size,
&rxdr->dma, GFP_KERNEL);
@@ -1620,9 +1616,8 @@ setup_rx_desc_die:
if (!rxdr->desc) {
dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
olddma);
- DPRINTK(PROBE, ERR,
- "Unable to allocate memory "
- "for the receive descriptor ring\n");
+ e_err("Unable to allocate memory for the Rx descriptor "
+ "ring\n");
goto setup_rx_desc_die;
}
@@ -1632,9 +1627,8 @@ setup_rx_desc_die:
rxdr->dma);
dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
olddma);
- DPRINTK(PROBE, ERR,
- "Unable to allocate aligned memory "
- "for the receive descriptor ring\n");
+ e_err("Unable to allocate aligned memory for the Rx "
+ "descriptor ring\n");
goto setup_rx_desc_die;
} else {
/* Free old allocation, new allocation was successful */
@@ -1666,8 +1660,7 @@ int e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
for (i = 0; i < adapter->num_rx_queues; i++) {
err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
if (err) {
- DPRINTK(PROBE, ERR,
- "Allocation for Rx Queue %u failed\n", i);
+ e_err("Allocation for Rx Queue %u failed\n", i);
for (i-- ; i >= 0; i--)
e1000_free_rx_resources(adapter,
&adapter->rx_ring[i]);
@@ -2118,7 +2111,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC);
if (!mcarray) {
- DPRINTK(PROBE, ERR, "memory allocation failed\n");
+ e_err("memory allocation failed\n");
return;
}
@@ -2314,16 +2307,16 @@ static void e1000_watchdog(unsigned long data)
&adapter->link_duplex);
ctrl = er32(CTRL);
- printk(KERN_INFO "e1000: %s NIC Link is Up %d Mbps %s, "
- "Flow Control: %s\n",
- netdev->name,
- adapter->link_speed,
- adapter->link_duplex == FULL_DUPLEX ?
- "Full Duplex" : "Half Duplex",
- ((ctrl & E1000_CTRL_TFCE) && (ctrl &
- E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
- E1000_CTRL_RFCE) ? "RX" : ((ctrl &
- E1000_CTRL_TFCE) ? "TX" : "None" )));
+ pr_info("%s NIC Link is Up %d Mbps %s, "
+ "Flow Control: %s\n",
+ netdev->name,
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) && (ctrl &
+ E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
+ E1000_CTRL_RFCE) ? "RX" : ((ctrl &
+ E1000_CTRL_TFCE) ? "TX" : "None")));
/* adjust timeout factor according to speed/duplex */
adapter->tx_timeout_factor = 1;
@@ -2353,8 +2346,8 @@ static void e1000_watchdog(unsigned long data)
if (netif_carrier_ok(netdev)) {
adapter->link_speed = 0;
adapter->link_duplex = 0;
- printk(KERN_INFO "e1000: %s NIC Link is Down\n",
- netdev->name);
+ pr_info("%s NIC Link is Down\n",
+ netdev->name);
netif_carrier_off(netdev);
if (!test_bit(__E1000_DOWN, &adapter->flags))
@@ -2644,8 +2637,7 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter,
break;
default:
if (unlikely(net_ratelimit()))
- DPRINTK(DRV, WARNING,
- "checksum_partial proto=%x!\n", skb->protocol);
+ e_warn("checksum_partial proto=%x!\n", skb->protocol);
break;
}
@@ -2989,8 +2981,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
/* fall through */
pull_size = min((unsigned int)4, skb->data_len);
if (!__pskb_pull_tail(skb, pull_size)) {
- DPRINTK(DRV, ERR,
- "__pskb_pull_tail failed.\n");
+ e_err("__pskb_pull_tail failed.\n");
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
@@ -3138,7 +3129,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
- DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
+ e_err("Invalid MTU setting\n");
return -EINVAL;
}
@@ -3146,7 +3137,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
switch (hw->mac_type) {
case e1000_undefined ... e1000_82542_rev2_1:
if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
- DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
+ e_err("Jumbo Frames not supported.\n");
return -EINVAL;
}
break;
@@ -3184,8 +3175,8 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
(max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
- printk(KERN_INFO "e1000: %s changing MTU from %d to %d\n",
- netdev->name, netdev->mtu, new_mtu);
+ pr_info("%s changing MTU from %d to %d\n",
+ netdev->name, netdev->mtu, new_mtu);
netdev->mtu = new_mtu;
if (netif_running(netdev))
@@ -3498,17 +3489,17 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
!(er32(STATUS) & E1000_STATUS_TXOFF)) {
/* detected Tx unit hang */
- DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
- " Tx Queue <%lu>\n"
- " TDH <%x>\n"
- " TDT <%x>\n"
- " next_to_use <%x>\n"
- " next_to_clean <%x>\n"
- "buffer_info[next_to_clean]\n"
- " time_stamp <%lx>\n"
- " next_to_watch <%x>\n"
- " jiffies <%lx>\n"
- " next_to_watch.status <%x>\n",
+ e_err("Detected Tx Unit Hang\n"
+ " Tx Queue <%lu>\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
(unsigned long)((tx_ring - adapter->tx_ring) /
sizeof(struct e1000_tx_ring)),
readl(hw->hw_addr + tx_ring->tdh),
@@ -3747,7 +3738,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
/* eth type trans needs skb->data to point to something */
if (!pskb_may_pull(skb, ETH_HLEN)) {
- DPRINTK(DRV, ERR, "pskb_may_pull failed.\n");
+ e_err("pskb_may_pull failed.\n");
dev_kfree_skb(skb);
goto next_desc;
}
@@ -3847,8 +3838,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
if (adapter->discarding) {
/* All receives must fit into a single buffer */
- E1000_DBG("%s: Receive packet consumed multiple"
- " buffers\n", netdev->name);
+ e_info("Receive packet consumed multiple buffers\n");
/* recycle */
buffer_info->skb = skb;
if (status & E1000_RXD_STAT_EOP)
@@ -3978,8 +3968,8 @@ e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
/* Fix for errata 23, can't cross 64kB boundary */
if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
struct sk_buff *oldskb = skb;
- DPRINTK(PROBE, ERR, "skb align check failed: %u bytes "
- "at %p\n", bufsz, skb->data);
+ e_err("skb align check failed: %u bytes at %p\n",
+ bufsz, skb->data);
/* Try again, without freeing the previous */
skb = netdev_alloc_skb_ip_align(netdev, bufsz);
/* Failed allocation, critical failure */
@@ -4087,8 +4077,8 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
/* Fix for errata 23, can't cross 64kB boundary */
if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
struct sk_buff *oldskb = skb;
- DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
- "at %p\n", bufsz, skb->data);
+ e_err("skb align check failed: %u bytes at %p\n",
+ bufsz, skb->data);
/* Try again, without freeing the previous */
skb = netdev_alloc_skb_ip_align(netdev, bufsz);
/* Failed allocation, critical failure */
@@ -4133,10 +4123,9 @@ map_skb:
if (!e1000_check_64k_bound(adapter,
(void *)(unsigned long)buffer_info->dma,
adapter->rx_buffer_len)) {
- DPRINTK(RX_ERR, ERR,
- "dma align check failed: %u bytes at %p\n",
- adapter->rx_buffer_len,
- (void *)(unsigned long)buffer_info->dma);
+ e_err("dma align check failed: %u bytes at %p\n",
+ adapter->rx_buffer_len,
+ (void *)(unsigned long)buffer_info->dma);
dev_kfree_skb(skb);
buffer_info->skb = NULL;
@@ -4348,7 +4337,7 @@ void e1000_pci_set_mwi(struct e1000_hw *hw)
int ret_val = pci_set_mwi(adapter->pdev);
if (ret_val)
- DPRINTK(PROBE, ERR, "Error in setting MWI\n");
+ e_err("Error in setting MWI\n");
}
void e1000_pci_clear_mwi(struct e1000_hw *hw)
@@ -4479,7 +4468,7 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
/* Fiber NICs only allow 1000 gbps Full duplex */
if ((hw->media_type == e1000_media_type_fiber) &&
spddplx != (SPEED_1000 + DUPLEX_FULL)) {
- DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ e_err("Unsupported Speed/Duplex configuration\n");
return -EINVAL;
}
@@ -4502,7 +4491,7 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
- DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
+ e_err("Unsupported Speed/Duplex configuration\n");
return -EINVAL;
}
return 0;
@@ -4625,7 +4614,7 @@ static int e1000_resume(struct pci_dev *pdev)
else
err = pci_enable_device_mem(pdev);
if (err) {
- printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
+ pr_err("Cannot enable PCI device from suspend\n");
return err;
}
pci_set_master(pdev);
@@ -4728,7 +4717,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
else
err = pci_enable_device_mem(pdev);
if (err) {
- printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
+ pr_err("Cannot re-enable PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
}
pci_set_master(pdev);
@@ -4759,7 +4748,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
if (netif_running(netdev)) {
if (e1000_up(adapter)) {
- printk("e1000: can't bring device back up after reset\n");
+ pr_info("can't bring device back up after reset\n");
return;
}
}
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h
index d9298522f5ae..edd1c75aa895 100644
--- a/drivers/net/e1000/e1000_osdep.h
+++ b/drivers/net/e1000/e1000_osdep.h
@@ -41,20 +41,6 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
-#ifdef DBG
-#define DEBUGOUT(S) printk(KERN_DEBUG S "\n")
-#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S "\n", A)
-#else
-#define DEBUGOUT(S)
-#define DEBUGOUT1(S, A...)
-#endif
-
-#define DEBUGFUNC(F) DEBUGOUT(F "\n")
-#define DEBUGOUT2 DEBUGOUT1
-#define DEBUGOUT3 DEBUGOUT2
-#define DEBUGOUT7 DEBUGOUT3
-
-
#define er32(reg) \
(readl(hw->hw_addr + ((hw->mac_type >= e1000_82543) \
? E1000_##reg : E1000_82542_##reg)))
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index 38d2741ccae9..543c6d1767bc 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -226,17 +226,16 @@ static int __devinit e1000_validate_option(unsigned int *value,
case enable_option:
switch (*value) {
case OPTION_ENABLED:
- DPRINTK(PROBE, INFO, "%s Enabled\n", opt->name);
+ e_dev_info("%s Enabled\n", opt->name);
return 0;
case OPTION_DISABLED:
- DPRINTK(PROBE, INFO, "%s Disabled\n", opt->name);
+ e_dev_info("%s Disabled\n", opt->name);
return 0;
}
break;
case range_option:
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- DPRINTK(PROBE, INFO,
- "%s set to %i\n", opt->name, *value);
+ e_dev_info("%s set to %i\n", opt->name, *value);
return 0;
}
break;
@@ -248,7 +247,7 @@ static int __devinit e1000_validate_option(unsigned int *value,
ent = &opt->arg.l.p[i];
if (*value == ent->i) {
if (ent->str[0] != '\0')
- DPRINTK(PROBE, INFO, "%s\n", ent->str);
+ e_dev_info("%s\n", ent->str);
return 0;
}
}
@@ -258,7 +257,7 @@ static int __devinit e1000_validate_option(unsigned int *value,
BUG();
}
- DPRINTK(PROBE, INFO, "Invalid %s value specified (%i) %s\n",
+ e_dev_info("Invalid %s value specified (%i) %s\n",
opt->name, *value, opt->err);
*value = opt->def;
return -1;
@@ -283,9 +282,8 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
int bd = adapter->bd_number;
if (bd >= E1000_MAX_NIC) {
- DPRINTK(PROBE, NOTICE,
- "Warning: no configuration for board #%i\n", bd);
- DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
+ e_dev_warn("Warning: no configuration for board #%i "
+ "using defaults for all values\n", bd);
}
{ /* Transmit Descriptor Count */
@@ -472,19 +470,17 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
adapter->itr = InterruptThrottleRate[bd];
switch (adapter->itr) {
case 0:
- DPRINTK(PROBE, INFO, "%s turned off\n",
- opt.name);
+ e_dev_info("%s turned off\n", opt.name);
break;
case 1:
- DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
- opt.name);
+ e_dev_info("%s set to dynamic mode\n",
+ opt.name);
adapter->itr_setting = adapter->itr;
adapter->itr = 20000;
break;
case 3:
- DPRINTK(PROBE, INFO,
- "%s set to dynamic conservative mode\n",
- opt.name);
+ e_dev_info("%s set to dynamic conservative "
+ "mode\n", opt.name);
adapter->itr_setting = adapter->itr;
adapter->itr = 20000;
break;
@@ -543,19 +539,18 @@ static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
{
int bd = adapter->bd_number;
if (num_Speed > bd) {
- DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
- "parameter ignored\n");
+ e_dev_info("Speed not valid for fiber adapters, parameter "
+ "ignored\n");
}
if (num_Duplex > bd) {
- DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
- "parameter ignored\n");
+ e_dev_info("Duplex not valid for fiber adapters, parameter "
+ "ignored\n");
}
if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
- DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
- "not valid for fiber adapters, "
- "parameter ignored\n");
+ e_dev_info("AutoNeg other than 1000/Full is not valid for fiber"
+ "adapters, parameter ignored\n");
}
}
@@ -619,9 +614,8 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
}
if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
- DPRINTK(PROBE, INFO,
- "AutoNeg specified along with Speed or Duplex, "
- "parameter ignored\n");
+ e_dev_info("AutoNeg specified along with Speed or Duplex, "
+ "parameter ignored\n");
adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
} else { /* Autoneg */
static const struct e1000_opt_list an_list[] =
@@ -680,79 +674,72 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
case 0:
adapter->hw.autoneg = adapter->fc_autoneg = 1;
if ((num_Speed > bd) && (speed != 0 || dplx != 0))
- DPRINTK(PROBE, INFO,
- "Speed and duplex autonegotiation enabled\n");
+ e_dev_info("Speed and duplex autonegotiation "
+ "enabled\n");
break;
case HALF_DUPLEX:
- DPRINTK(PROBE, INFO, "Half Duplex specified without Speed\n");
- DPRINTK(PROBE, INFO, "Using Autonegotiation at "
- "Half Duplex only\n");
+ e_dev_info("Half Duplex specified without Speed\n");
+ e_dev_info("Using Autonegotiation at Half Duplex only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
ADVERTISE_100_HALF;
break;
case FULL_DUPLEX:
- DPRINTK(PROBE, INFO, "Full Duplex specified without Speed\n");
- DPRINTK(PROBE, INFO, "Using Autonegotiation at "
- "Full Duplex only\n");
+ e_dev_info("Full Duplex specified without Speed\n");
+ e_dev_info("Using Autonegotiation at Full Duplex only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
ADVERTISE_100_FULL |
ADVERTISE_1000_FULL;
break;
case SPEED_10:
- DPRINTK(PROBE, INFO, "10 Mbps Speed specified "
- "without Duplex\n");
- DPRINTK(PROBE, INFO, "Using Autonegotiation at 10 Mbps only\n");
+ e_dev_info("10 Mbps Speed specified without Duplex\n");
+ e_dev_info("Using Autonegotiation at 10 Mbps only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
ADVERTISE_10_FULL;
break;
case SPEED_10 + HALF_DUPLEX:
- DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Half Duplex\n");
+ e_dev_info("Forcing to 10 Mbps Half Duplex\n");
adapter->hw.autoneg = adapter->fc_autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_10_half;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_10 + FULL_DUPLEX:
- DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Full Duplex\n");
+ e_dev_info("Forcing to 10 Mbps Full Duplex\n");
adapter->hw.autoneg = adapter->fc_autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_10_full;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_100:
- DPRINTK(PROBE, INFO, "100 Mbps Speed specified "
- "without Duplex\n");
- DPRINTK(PROBE, INFO, "Using Autonegotiation at "
- "100 Mbps only\n");
+ e_dev_info("100 Mbps Speed specified without Duplex\n");
+ e_dev_info("Using Autonegotiation at 100 Mbps only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
ADVERTISE_100_FULL;
break;
case SPEED_100 + HALF_DUPLEX:
- DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Half Duplex\n");
+ e_dev_info("Forcing to 100 Mbps Half Duplex\n");
adapter->hw.autoneg = adapter->fc_autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_100_half;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_100 + FULL_DUPLEX:
- DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Full Duplex\n");
+ e_dev_info("Forcing to 100 Mbps Full Duplex\n");
adapter->hw.autoneg = adapter->fc_autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_100_full;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_1000:
- DPRINTK(PROBE, INFO, "1000 Mbps Speed specified without "
- "Duplex\n");
+ e_dev_info("1000 Mbps Speed specified without Duplex\n");
goto full_duplex_only;
case SPEED_1000 + HALF_DUPLEX:
- DPRINTK(PROBE, INFO,
- "Half Duplex is not supported at 1000 Mbps\n");
+ e_dev_info("Half Duplex is not supported at 1000 Mbps\n");
/* fall through */
case SPEED_1000 + FULL_DUPLEX:
full_duplex_only:
- DPRINTK(PROBE, INFO,
- "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
+ e_dev_info("Using Autonegotiation at 1000 Mbps Full Duplex "
+ "only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
break;
@@ -762,9 +749,8 @@ full_duplex_only:
/* Speed, AutoNeg and MDI/MDI-X must all play nice */
if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) {
- DPRINTK(PROBE, INFO,
- "Speed, AutoNeg and MDI-X specifications are "
- "incompatible. Setting MDI-X to a compatible value.\n");
+ e_dev_info("Speed, AutoNeg and MDI-X specs are incompatible. "
+ "Setting MDI-X to a compatible value.\n");
}
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 10:00:49 +0300