diff options
author | Emil Tantilov <emil.s.tantilov@intel.com> | 2010-07-27 10:37:21 +0400 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-07-27 10:37:21 +0400 |
commit | feb8f47809fcc60250d28a6ddabc0ddbe9360d7c (patch) | |
tree | 0d4d6b59328786dc057afec7d469fd2875adb6b7 /drivers/net/e1000/e1000_main.c | |
parent | 66cc42a4bc23a5f621407d1c23b9fe29d41c92c6 (diff) | |
download | linux-feb8f47809fcc60250d28a6ddabc0ddbe9360d7c.tar.xz |
e1000: use netif_<level> instead of netdev_<level>
This patch restores the ability to set msglvl through ethtool.
The issue was introduced by:
commit 675ad47375c76a7c3be4ace9554d92cd55518ced
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/e1000/e1000_main.c')
-rw-r--r-- | drivers/net/e1000/e1000_main.c | 86 |
1 files changed, 46 insertions, 40 deletions
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 68a80893dce1..02833af8a0b1 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -275,7 +275,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter) err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name, netdev); if (err) { - e_err("Unable to allocate interrupt Error: %d\n", err); + e_err(probe, "Unable to allocate interrupt Error: %d\n", err); } return err; @@ -657,7 +657,7 @@ void e1000_reset(struct e1000_adapter *adapter) ew32(WUC, 0); if (e1000_init_hw(hw)) - e_err("Hardware Error\n"); + e_dev_err("Hardware Error\n"); e1000_update_mng_vlan(adapter); /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */ @@ -925,7 +925,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize eeprom parameters */ if (e1000_init_eeprom_params(hw)) { - e_err("EEPROM initialization failed\n"); + e_err(probe, "EEPROM initialization failed\n"); goto err_eeprom; } @@ -936,7 +936,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* make sure the EEPROM is good */ if (e1000_validate_eeprom_checksum(hw) < 0) { - e_err("The EEPROM Checksum Is Not Valid\n"); + e_err(probe, "The EEPROM Checksum Is Not Valid\n"); e1000_dump_eeprom(adapter); /* * set MAC address to all zeroes to invalidate and temporary @@ -950,14 +950,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev, } else { /* copy the MAC address out of the EEPROM */ if (e1000_read_mac_addr(hw)) - e_err("EEPROM Read Error\n"); + e_err(probe, "EEPROM Read Error\n"); } /* don't block initalization here due to bad MAC address */ memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len); memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len); if (!is_valid_ether_addr(netdev->perm_addr)) - e_err("Invalid MAC Address\n"); + e_err(probe, "Invalid MAC Address\n"); e1000_get_bus_info(hw); @@ -1047,7 +1047,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, goto err_register; /* print bus type/speed/width info */ - e_info("(PCI%s:%dMHz:%d-bit) %pM\n", + e_info(probe, "(PCI%s:%dMHz:%d-bit) %pM\n", ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""), ((hw->bus_speed == e1000_bus_speed_133) ? 133 : (hw->bus_speed == e1000_bus_speed_120) ? 120 : @@ -1059,7 +1059,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* carrier off reporting is important to ethtool even BEFORE open */ netif_carrier_off(netdev); - e_info("Intel(R) PRO/1000 Network Connection\n"); + e_info(probe, "Intel(R) PRO/1000 Network Connection\n"); cards_found++; return 0; @@ -1159,7 +1159,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) /* identify the MAC */ if (e1000_set_mac_type(hw)) { - e_err("Unknown MAC Type\n"); + e_err(probe, "Unknown MAC Type\n"); return -EIO; } @@ -1192,7 +1192,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) adapter->num_rx_queues = 1; if (e1000_alloc_queues(adapter)) { - e_err("Unable to allocate memory for queues\n"); + e_err(probe, "Unable to allocate memory for queues\n"); return -ENOMEM; } @@ -1386,7 +1386,8 @@ static int e1000_setup_tx_resources(struct e1000_adapter *adapter, size = sizeof(struct e1000_buffer) * txdr->count; txdr->buffer_info = vmalloc(size); if (!txdr->buffer_info) { - e_err("Unable to allocate memory for the Tx descriptor ring\n"); + e_err(probe, "Unable to allocate memory for the Tx descriptor " + "ring\n"); return -ENOMEM; } memset(txdr->buffer_info, 0, size); @@ -1401,7 +1402,8 @@ static int e1000_setup_tx_resources(struct e1000_adapter *adapter, if (!txdr->desc) { setup_tx_desc_die: vfree(txdr->buffer_info); - e_err("Unable to allocate memory for the Tx descriptor ring\n"); + e_err(probe, "Unable to allocate memory for the Tx descriptor " + "ring\n"); return -ENOMEM; } @@ -1409,7 +1411,7 @@ setup_tx_desc_die: if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) { void *olddesc = txdr->desc; dma_addr_t olddma = txdr->dma; - e_err("txdr align check failed: %u bytes at %p\n", + e_err(tx_err, "txdr align check failed: %u bytes at %p\n", txdr->size, txdr->desc); /* Try again, without freeing the previous */ txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, @@ -1427,7 +1429,7 @@ setup_tx_desc_die: txdr->dma); dma_free_coherent(&pdev->dev, txdr->size, olddesc, olddma); - e_err("Unable to allocate aligned memory " + e_err(probe, "Unable to allocate aligned memory " "for the transmit descriptor ring\n"); vfree(txdr->buffer_info); return -ENOMEM; @@ -1460,7 +1462,7 @@ int e1000_setup_all_tx_resources(struct e1000_adapter *adapter) for (i = 0; i < adapter->num_tx_queues; i++) { err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]); if (err) { - e_err("Allocation for Tx Queue %u failed\n", i); + e_err(probe, "Allocation for Tx Queue %u failed\n", i); for (i-- ; i >= 0; i--) e1000_free_tx_resources(adapter, &adapter->tx_ring[i]); @@ -1580,7 +1582,8 @@ static int e1000_setup_rx_resources(struct e1000_adapter *adapter, size = sizeof(struct e1000_buffer) * rxdr->count; rxdr->buffer_info = vmalloc(size); if (!rxdr->buffer_info) { - e_err("Unable to allocate memory for the Rx descriptor ring\n"); + e_err(probe, "Unable to allocate memory for the Rx descriptor " + "ring\n"); return -ENOMEM; } memset(rxdr->buffer_info, 0, size); @@ -1596,7 +1599,8 @@ static int e1000_setup_rx_resources(struct e1000_adapter *adapter, GFP_KERNEL); if (!rxdr->desc) { - e_err("Unable to allocate memory for the Rx descriptor ring\n"); + e_err(probe, "Unable to allocate memory for the Rx descriptor " + "ring\n"); setup_rx_desc_die: vfree(rxdr->buffer_info); return -ENOMEM; @@ -1606,7 +1610,7 @@ setup_rx_desc_die: if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) { void *olddesc = rxdr->desc; dma_addr_t olddma = rxdr->dma; - e_err("rxdr align check failed: %u bytes at %p\n", + e_err(rx_err, "rxdr align check failed: %u bytes at %p\n", rxdr->size, rxdr->desc); /* Try again, without freeing the previous */ rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, @@ -1615,8 +1619,8 @@ setup_rx_desc_die: if (!rxdr->desc) { dma_free_coherent(&pdev->dev, rxdr->size, olddesc, olddma); - e_err("Unable to allocate memory for the Rx descriptor " - "ring\n"); + e_err(probe, "Unable to allocate memory for the Rx " + "descriptor ring\n"); goto setup_rx_desc_die; } @@ -1626,8 +1630,8 @@ setup_rx_desc_die: rxdr->dma); dma_free_coherent(&pdev->dev, rxdr->size, olddesc, olddma); - e_err("Unable to allocate aligned memory for the Rx " - "descriptor ring\n"); + e_err(probe, "Unable to allocate aligned memory for " + "the Rx descriptor ring\n"); goto setup_rx_desc_die; } else { /* Free old allocation, new allocation was successful */ @@ -1659,7 +1663,7 @@ int e1000_setup_all_rx_resources(struct e1000_adapter *adapter) for (i = 0; i < adapter->num_rx_queues; i++) { err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]); if (err) { - e_err("Allocation for Rx Queue %u failed\n", i); + e_err(probe, "Allocation for Rx Queue %u failed\n", i); for (i-- ; i >= 0; i--) e1000_free_rx_resources(adapter, &adapter->rx_ring[i]); @@ -2110,7 +2114,7 @@ static void e1000_set_rx_mode(struct net_device *netdev) u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC); if (!mcarray) { - e_err("memory allocation failed\n"); + e_err(probe, "memory allocation failed\n"); return; } @@ -2648,7 +2652,8 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter, break; default: if (unlikely(net_ratelimit())) - e_warn("checksum_partial proto=%x!\n", skb->protocol); + e_warn(drv, "checksum_partial proto=%x!\n", + skb->protocol); break; } @@ -2992,7 +2997,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, /* fall through */ pull_size = min((unsigned int)4, skb->data_len); if (!__pskb_pull_tail(skb, pull_size)) { - e_err("__pskb_pull_tail failed.\n"); + e_err(drv, "__pskb_pull_tail " + "failed.\n"); dev_kfree_skb_any(skb); return NETDEV_TX_OK; } @@ -3140,7 +3146,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { - e_err("Invalid MTU setting\n"); + e_err(probe, "Invalid MTU setting\n"); return -EINVAL; } @@ -3148,7 +3154,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) switch (hw->mac_type) { case e1000_undefined ... e1000_82542_rev2_1: if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) { - e_err("Jumbo Frames not supported.\n"); + e_err(probe, "Jumbo Frames not supported.\n"); return -EINVAL; } break; @@ -3500,7 +3506,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, !(er32(STATUS) & E1000_STATUS_TXOFF)) { /* detected Tx unit hang */ - e_err("Detected Tx Unit Hang\n" + e_err(drv, "Detected Tx Unit Hang\n" " Tx Queue <%lu>\n" " TDH <%x>\n" " TDT <%x>\n" @@ -3749,7 +3755,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, /* eth type trans needs skb->data to point to something */ if (!pskb_may_pull(skb, ETH_HLEN)) { - e_err("pskb_may_pull failed.\n"); + e_err(drv, "pskb_may_pull failed.\n"); dev_kfree_skb(skb); goto next_desc; } @@ -3874,7 +3880,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, if (adapter->discarding) { /* All receives must fit into a single buffer */ - e_info("Receive packet consumed multiple buffers\n"); + e_dbg("Receive packet consumed multiple buffers\n"); /* recycle */ buffer_info->skb = skb; if (status & E1000_RXD_STAT_EOP) @@ -3986,8 +3992,8 @@ e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter, /* Fix for errata 23, can't cross 64kB boundary */ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) { struct sk_buff *oldskb = skb; - e_err("skb align check failed: %u bytes at %p\n", - bufsz, skb->data); + e_err(rx_err, "skb align check failed: %u bytes at " + "%p\n", bufsz, skb->data); /* Try again, without freeing the previous */ skb = netdev_alloc_skb_ip_align(netdev, bufsz); /* Failed allocation, critical failure */ @@ -4095,8 +4101,8 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, /* Fix for errata 23, can't cross 64kB boundary */ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) { struct sk_buff *oldskb = skb; - e_err("skb align check failed: %u bytes at %p\n", - bufsz, skb->data); + e_err(rx_err, "skb align check failed: %u bytes at " + "%p\n", bufsz, skb->data); /* Try again, without freeing the previous */ skb = netdev_alloc_skb_ip_align(netdev, bufsz); /* Failed allocation, critical failure */ @@ -4141,8 +4147,8 @@ map_skb: if (!e1000_check_64k_bound(adapter, (void *)(unsigned long)buffer_info->dma, adapter->rx_buffer_len)) { - e_err("dma align check failed: %u bytes at %p\n", - adapter->rx_buffer_len, + e_err(rx_err, "dma align check failed: %u bytes at " + "%p\n", adapter->rx_buffer_len, (void *)(unsigned long)buffer_info->dma); dev_kfree_skb(skb); buffer_info->skb = NULL; @@ -4355,7 +4361,7 @@ void e1000_pci_set_mwi(struct e1000_hw *hw) int ret_val = pci_set_mwi(adapter->pdev); if (ret_val) - e_err("Error in setting MWI\n"); + e_err(probe, "Error in setting MWI\n"); } void e1000_pci_clear_mwi(struct e1000_hw *hw) @@ -4486,7 +4492,7 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) /* Fiber NICs only allow 1000 gbps Full duplex */ if ((hw->media_type == e1000_media_type_fiber) && spddplx != (SPEED_1000 + DUPLEX_FULL)) { - e_err("Unsupported Speed/Duplex configuration\n"); + e_err(probe, "Unsupported Speed/Duplex configuration\n"); return -EINVAL; } @@ -4509,7 +4515,7 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) break; case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: - e_err("Unsupported Speed/Duplex configuration\n"); + e_err(probe, "Unsupported Speed/Duplex configuration\n"); return -EINVAL; } return 0; |