Merge branch 'next' into for-linus

Prepare input updates for 5.14 merge window.

5 files changed, 226 insertions, 76 deletions

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index a162499bcafc..eb443721c58e 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1105,13 +1105,6 @@ static int b53_setup(struct dsa_switch *ds)
 			b53_disable_port(ds, port);
 	}
 
-	/* Let DSA handle the case were multiple bridges span the same switch
-	 * device and different VLAN awareness settings are requested, which
-	 * would be breaking filtering semantics for any of the other bridge
-	 * devices. (not hardware supported)
-	 */
-	ds->vlan_filtering_is_global = true;
-
 	return b53_setup_devlink_resources(ds);
 }
 
@@ -2664,6 +2657,13 @@ struct b53_device *b53_switch_alloc(struct device *base,
 	ds->ops = &b53_switch_ops;
 	ds->untag_bridge_pvid = true;
 	dev->vlan_enabled = true;
+	/* Let DSA handle the case were multiple bridges span the same switch
+	 * device and different VLAN awareness settings are requested, which
+	 * would be breaking filtering semantics for any of the other bridge
+	 * devices. (not hardware supported)
+	 */
+	ds->vlan_filtering_is_global = true;
+
 	mutex_init(&dev->reg_mutex);
 	mutex_init(&dev->stats_mutex);
 
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index f277df922fcd..ba5d546d06aa 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -114,7 +114,10 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 		/* Force link status for IMP port */
 		reg = core_readl(priv, offset);
 		reg |= (MII_SW_OR | LINK_STS);
-		reg &= ~GMII_SPEED_UP_2G;
+		if (priv->type == BCM4908_DEVICE_ID)
+			reg |= GMII_SPEED_UP_2G;
+		else
+			reg &= ~GMII_SPEED_UP_2G;
 		core_writel(priv, reg, offset);
 
 		/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
@@ -585,8 +588,10 @@ static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
 	 * in bits 15:8 and the patch level in bits 7:0 which is exactly what
 	 * the REG_PHY_REVISION register layout is.
 	 */
-
-	return priv->hw_params.gphy_rev;
+	if (priv->int_phy_mask & BIT(port))
+		return priv->hw_params.gphy_rev;
+	else
+		return 0;
 }
 
 static void bcm_sf2_sw_validate(struct dsa_switch *ds, int port,
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 52e865a3912c..bf5c62e5c0b0 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -93,8 +93,12 @@
 
 /* GSWIP MII Registers */
 #define GSWIP_MII_CFGp(p)		(0x2 * (p))
+#define  GSWIP_MII_CFG_RESET		BIT(15)
 #define  GSWIP_MII_CFG_EN		BIT(14)
+#define  GSWIP_MII_CFG_ISOLATE		BIT(13)
 #define  GSWIP_MII_CFG_LDCLKDIS		BIT(12)
+#define  GSWIP_MII_CFG_RGMII_IBS	BIT(8)
+#define  GSWIP_MII_CFG_RMII_CLK		BIT(7)
 #define  GSWIP_MII_CFG_MODE_MIIP	0x0
 #define  GSWIP_MII_CFG_MODE_MIIM	0x1
 #define  GSWIP_MII_CFG_MODE_RMIIP	0x2
@@ -190,6 +194,23 @@
 #define GSWIP_PCE_DEFPVID(p)		(0x486 + ((p) * 0xA))
 
 #define GSWIP_MAC_FLEN			0x8C5
+#define GSWIP_MAC_CTRL_0p(p)		(0x903 + ((p) * 0xC))
+#define  GSWIP_MAC_CTRL_0_PADEN		BIT(8)
+#define  GSWIP_MAC_CTRL_0_FCS_EN	BIT(7)
+#define  GSWIP_MAC_CTRL_0_FCON_MASK	0x0070
+#define  GSWIP_MAC_CTRL_0_FCON_AUTO	0x0000
+#define  GSWIP_MAC_CTRL_0_FCON_RX	0x0010
+#define  GSWIP_MAC_CTRL_0_FCON_TX	0x0020
+#define  GSWIP_MAC_CTRL_0_FCON_RXTX	0x0030
+#define  GSWIP_MAC_CTRL_0_FCON_NONE	0x0040
+#define  GSWIP_MAC_CTRL_0_FDUP_MASK	0x000C
+#define  GSWIP_MAC_CTRL_0_FDUP_AUTO	0x0000
+#define  GSWIP_MAC_CTRL_0_FDUP_EN	0x0004
+#define  GSWIP_MAC_CTRL_0_FDUP_DIS	0x000C
+#define  GSWIP_MAC_CTRL_0_GMII_MASK	0x0003
+#define  GSWIP_MAC_CTRL_0_GMII_AUTO	0x0000
+#define  GSWIP_MAC_CTRL_0_GMII_MII	0x0001
+#define  GSWIP_MAC_CTRL_0_GMII_RGMII	0x0002
 #define GSWIP_MAC_CTRL_2p(p)		(0x905 + ((p) * 0xC))
 #define GSWIP_MAC_CTRL_2_MLEN		BIT(3) /* Maximum Untagged Frame Lnegth */
 
@@ -653,16 +674,13 @@ static int gswip_port_enable(struct dsa_switch *ds, int port,
 			  GSWIP_SDMA_PCTRLp(port));
 
 	if (!dsa_is_cpu_port(ds, port)) {
-		u32 macconf = GSWIP_MDIO_PHY_LINK_AUTO |
-			      GSWIP_MDIO_PHY_SPEED_AUTO |
-			      GSWIP_MDIO_PHY_FDUP_AUTO |
-			      GSWIP_MDIO_PHY_FCONTX_AUTO |
-			      GSWIP_MDIO_PHY_FCONRX_AUTO |
-			      (phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK);
-
-		gswip_mdio_w(priv, macconf, GSWIP_MDIO_PHYp(port));
-		/* Activate MDIO auto polling */
-		gswip_mdio_mask(priv, 0, BIT(port), GSWIP_MDIO_MDC_CFG0);
+		u32 mdio_phy = 0;
+
+		if (phydev)
+			mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK;
+
+		gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy,
+				GSWIP_MDIO_PHYp(port));
 	}
 
 	return 0;
@@ -675,14 +693,6 @@ static void gswip_port_disable(struct dsa_switch *ds, int port)
 	if (!dsa_is_user_port(ds, port))
 		return;
 
-	if (!dsa_is_cpu_port(ds, port)) {
-		gswip_mdio_mask(priv, GSWIP_MDIO_PHY_LINK_DOWN,
-				GSWIP_MDIO_PHY_LINK_MASK,
-				GSWIP_MDIO_PHYp(port));
-		/* Deactivate MDIO auto polling */
-		gswip_mdio_mask(priv, BIT(port), 0, GSWIP_MDIO_MDC_CFG0);
-	}
-
 	gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0,
 			  GSWIP_FDMA_PCTRLp(port));
 	gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0,
@@ -794,14 +804,32 @@ static int gswip_setup(struct dsa_switch *ds)
 	gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP2);
 	gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP3);
 
-	/* disable PHY auto polling */
+	/* Deactivate MDIO PHY auto polling. Some PHYs as the AR8030 have an
+	 * interoperability problem with this auto polling mechanism because
+	 * their status registers think that the link is in a different state
+	 * than it actually is. For the AR8030 it has the BMSR_ESTATEN bit set
+	 * as well as ESTATUS_1000_TFULL and ESTATUS_1000_XFULL. This makes the
+	 * auto polling state machine consider the link being negotiated with
+	 * 1Gbit/s. Since the PHY itself is a Fast Ethernet RMII PHY this leads
+	 * to the switch port being completely dead (RX and TX are both not
+	 * working).
+	 * Also with various other PHY / port combinations (PHY11G GPHY, PHY22F
+	 * GPHY, external RGMII PEF7071/7072) any traffic would stop. Sometimes
+	 * it would work fine for a few minutes to hours and then stop, on
+	 * other device it would no traffic could be sent or received at all.
+	 * Testing shows that when PHY auto polling is disabled these problems
+	 * go away.
+	 */
 	gswip_mdio_w(priv, 0x0, GSWIP_MDIO_MDC_CFG0);
+
 	/* Configure the MDIO Clock 2.5 MHz */
 	gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1);
 
-	/* Disable the xMII link */
+	/* Disable the xMII interface and clear it's isolation bit */
 	for (i = 0; i < priv->hw_info->max_ports; i++)
-		gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, i);
+		gswip_mii_mask_cfg(priv,
+				   GSWIP_MII_CFG_EN | GSWIP_MII_CFG_ISOLATE,
+				   0, i);
 
 	/* enable special tag insertion on cpu port */
 	gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN,
@@ -1450,6 +1478,112 @@ unsupported:
 	return;
 }
 
+static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link)
+{
+	u32 mdio_phy;
+
+	if (link)
+		mdio_phy = GSWIP_MDIO_PHY_LINK_UP;
+	else
+		mdio_phy = GSWIP_MDIO_PHY_LINK_DOWN;
+
+	gswip_mdio_mask(priv, GSWIP_MDIO_PHY_LINK_MASK, mdio_phy,
+			GSWIP_MDIO_PHYp(port));
+}
+
+static void gswip_port_set_speed(struct gswip_priv *priv, int port, int speed,
+				 phy_interface_t interface)
+{
+	u32 mdio_phy = 0, mii_cfg = 0, mac_ctrl_0 = 0;
+
+	switch (speed) {
+	case SPEED_10:
+		mdio_phy = GSWIP_MDIO_PHY_SPEED_M10;
+
+		if (interface == PHY_INTERFACE_MODE_RMII)
+			mii_cfg = GSWIP_MII_CFG_RATE_M50;
+		else
+			mii_cfg = GSWIP_MII_CFG_RATE_M2P5;
+
+		mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII;
+		break;
+
+	case SPEED_100:
+		mdio_phy = GSWIP_MDIO_PHY_SPEED_M100;
+
+		if (interface == PHY_INTERFACE_MODE_RMII)
+			mii_cfg = GSWIP_MII_CFG_RATE_M50;
+		else
+			mii_cfg = GSWIP_MII_CFG_RATE_M25;
+
+		mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII;
+		break;
+
+	case SPEED_1000:
+		mdio_phy = GSWIP_MDIO_PHY_SPEED_G1;
+
+		mii_cfg = GSWIP_MII_CFG_RATE_M125;
+
+		mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_RGMII;
+		break;
+	}
+
+	gswip_mdio_mask(priv, GSWIP_MDIO_PHY_SPEED_MASK, mdio_phy,
+			GSWIP_MDIO_PHYp(port));
+	gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK, mii_cfg, port);
+	gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_GMII_MASK, mac_ctrl_0,
+			  GSWIP_MAC_CTRL_0p(port));
+}
+
+static void gswip_port_set_duplex(struct gswip_priv *priv, int port, int duplex)
+{
+	u32 mac_ctrl_0, mdio_phy;
+
+	if (duplex == DUPLEX_FULL) {
+		mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_EN;
+		mdio_phy = GSWIP_MDIO_PHY_FDUP_EN;
+	} else {
+		mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_DIS;
+		mdio_phy = GSWIP_MDIO_PHY_FDUP_DIS;
+	}
+
+	gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FDUP_MASK, mac_ctrl_0,
+			  GSWIP_MAC_CTRL_0p(port));
+	gswip_mdio_mask(priv, GSWIP_MDIO_PHY_FDUP_MASK, mdio_phy,
+			GSWIP_MDIO_PHYp(port));
+}
+
+static void gswip_port_set_pause(struct gswip_priv *priv, int port,
+				 bool tx_pause, bool rx_pause)
+{
+	u32 mac_ctrl_0, mdio_phy;
+
+	if (tx_pause && rx_pause) {
+		mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RXTX;
+		mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN |
+			   GSWIP_MDIO_PHY_FCONRX_EN;
+	} else if (tx_pause) {
+		mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_TX;
+		mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN |
+			   GSWIP_MDIO_PHY_FCONRX_DIS;
+	} else if (rx_pause) {
+		mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RX;
+		mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS |
+			   GSWIP_MDIO_PHY_FCONRX_EN;
+	} else {
+		mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_NONE;
+		mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS |
+			   GSWIP_MDIO_PHY_FCONRX_DIS;
+	}
+
+	gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FCON_MASK,
+			  mac_ctrl_0, GSWIP_MAC_CTRL_0p(port));
+	gswip_mdio_mask(priv,
+			GSWIP_MDIO_PHY_FCONTX_MASK |
+			GSWIP_MDIO_PHY_FCONRX_MASK,
+			mdio_phy, GSWIP_MDIO_PHYp(port));
+}
+
 static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
 				     unsigned int mode,
 				     const struct phylink_link_state *state)
@@ -1469,6 +1603,9 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
 		break;
 	case PHY_INTERFACE_MODE_RMII:
 		miicfg |= GSWIP_MII_CFG_MODE_RMIIM;
+
+		/* Configure the RMII clock as output: */
+		miicfg |= GSWIP_MII_CFG_RMII_CLK;
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_ID:
@@ -1481,7 +1618,11 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
 			"Unsupported interface: %d\n", state->interface);
 		return;
 	}
-	gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_MODE_MASK, miicfg, port);
+
+	gswip_mii_mask_cfg(priv,
+			   GSWIP_MII_CFG_MODE_MASK | GSWIP_MII_CFG_RMII_CLK |
+			   GSWIP_MII_CFG_RGMII_IBS | GSWIP_MII_CFG_LDCLKDIS,
+			   miicfg, port);
 
 	switch (state->interface) {
 	case PHY_INTERFACE_MODE_RGMII_ID:
@@ -1506,6 +1647,9 @@ static void gswip_phylink_mac_link_down(struct dsa_switch *ds, int port,
 	struct gswip_priv *priv = ds->priv;
 
 	gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, port);
+
+	if (!dsa_is_cpu_port(ds, port))
+		gswip_port_set_link(priv, port, false);
 }
 
 static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port,
@@ -1517,6 +1661,13 @@ static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port,
 {
 	struct gswip_priv *priv = ds->priv;
 
+	if (!dsa_is_cpu_port(ds, port)) {
+		gswip_port_set_link(priv, port, true);
+		gswip_port_set_speed(priv, port, speed, interface);
+		gswip_port_set_duplex(priv, port, duplex);
+		gswip_port_set_pause(priv, port, tx_pause, rx_pause);
+	}
+
 	gswip_mii_mask_cfg(priv, 0, GSWIP_MII_CFG_EN, port);
 }
 
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index f06f5fa2f898..9871d7cff93a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -436,34 +436,32 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
 			     TD_DM_DRVP(8) | TD_DM_DRVN(8));
 
 	/* Setup core clock for MT7530 */
-	if (!trgint) {
-		/* Disable MT7530 core clock */
-		core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
-
-		/* Disable PLL, since phy_device has not yet been created
-		 * provided for phy_[read,write]_mmd_indirect is called, we
-		 * provide our own core_write_mmd_indirect to complete this
-		 * function.
-		 */
-		core_write_mmd_indirect(priv,
-					CORE_GSWPLL_GRP1,
-					MDIO_MMD_VEND2,
-					0);
-
-		/* Set core clock into 500Mhz */
-		core_write(priv, CORE_GSWPLL_GRP2,
-			   RG_GSWPLL_POSDIV_500M(1) |
-			   RG_GSWPLL_FBKDIV_500M(25));
+	/* Disable MT7530 core clock */
+	core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
 
-		/* Enable PLL */
-		core_write(priv, CORE_GSWPLL_GRP1,
-			   RG_GSWPLL_EN_PRE |
-			   RG_GSWPLL_POSDIV_200M(2) |
-			   RG_GSWPLL_FBKDIV_200M(32));
-
-		/* Enable MT7530 core clock */
-		core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
-	}
+	/* Disable PLL, since phy_device has not yet been created
+	 * provided for phy_[read,write]_mmd_indirect is called, we
+	 * provide our own core_write_mmd_indirect to complete this
+	 * function.
+	 */
+	core_write_mmd_indirect(priv,
+				CORE_GSWPLL_GRP1,
+				MDIO_MMD_VEND2,
+				0);
+
+	/* Set core clock into 500Mhz */
+	core_write(priv, CORE_GSWPLL_GRP2,
+		   RG_GSWPLL_POSDIV_500M(1) |
+		   RG_GSWPLL_FBKDIV_500M(25));
+
+	/* Enable PLL */
+	core_write(priv, CORE_GSWPLL_GRP1,
+		   RG_GSWPLL_EN_PRE |
+		   RG_GSWPLL_POSDIV_200M(2) |
+		   RG_GSWPLL_FBKDIV_200M(32));
+
+	/* Enable MT7530 core clock */
+	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
 
 	/* Setup the MT7530 TRGMII Tx Clock */
 	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 903d619e08ed..e08bf9377140 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3026,10 +3026,17 @@ out_resources:
 	return err;
 }
 
+/* prod_id for switch families which do not have a PHY model number */
+static const u16 family_prod_id_table[] = {
+	[MV88E6XXX_FAMILY_6341] = MV88E6XXX_PORT_SWITCH_ID_PROD_6341,
+	[MV88E6XXX_FAMILY_6390] = MV88E6XXX_PORT_SWITCH_ID_PROD_6390,
+};
+
 static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
 {
 	struct mv88e6xxx_mdio_bus *mdio_bus = bus->priv;
 	struct mv88e6xxx_chip *chip = mdio_bus->chip;
+	u16 prod_id;
 	u16 val;
 	int err;
 
@@ -3040,23 +3047,12 @@ static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
 	err = chip->info->ops->phy_read(chip, bus, phy, reg, &val);
 	mv88e6xxx_reg_unlock(chip);
 
-	if (reg == MII_PHYSID2) {
-		/* Some internal PHYs don't have a model number. */
-		if (chip->info->family != MV88E6XXX_FAMILY_6165)
-			/* Then there is the 6165 family. It gets is
-			 * PHYs correct. But it can also have two
-			 * SERDES interfaces in the PHY address
-			 * space. And these don't have a model
-			 * number. But they are not PHYs, so we don't
-			 * want to give them something a PHY driver
-			 * will recognise.
-			 *
-			 * Use the mv88e6390 family model number
-			 * instead, for anything which really could be
-			 * a PHY,
-			 */
-			if (!(val & 0x3f0))
-				val |= MV88E6XXX_PORT_SWITCH_ID_PROD_6390 >> 4;
+	/* Some internal PHYs don't have a model number. */
+	if (reg == MII_PHYSID2 && !(val & 0x3f0) &&
+	    chip->info->family < ARRAY_SIZE(family_prod_id_table)) {
+		prod_id = family_prod_id_table[chip->info->family];
+		if (prod_id)
+			val |= prod_id >> 4;
 	}
 
 	return err ? err : val;