Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

The UDP reuseport conflict was a little bit tricky.

The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.

At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.

This requires moving the reuseport_has_conns() logic into the callers.

While we are here, get rid of inline directives as they do not belong
in foo.c files.

The other changes were cases of more straightforward overlapping
modifications.

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 43 insertions, 26 deletions

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 687d442f3bc7..dc999406ce86 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -965,23 +965,6 @@ static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
 			     PORT_MIRROR_SNIFFER, false);
 }
 
-static void ksz9477_phy_setup(struct ksz_device *dev, int port,
-			      struct phy_device *phy)
-{
-	/* Only apply to port with PHY. */
-	if (port >= dev->phy_port_cnt)
-		return;
-
-	/* The MAC actually cannot run in 1000 half-duplex mode. */
-	phy_remove_link_mode(phy,
-			     ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
-
-	/* PHY does not support gigabit. */
-	if (!(dev->features & GBIT_SUPPORT))
-		phy_remove_link_mode(phy,
-				     ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
-}
-
 static bool ksz9477_get_gbit(struct ksz_device *dev, u8 data)
 {
 	bool gbit;
@@ -1585,7 +1568,6 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.get_port_addr = ksz9477_get_port_addr,
 	.cfg_port_member = ksz9477_cfg_port_member,
 	.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
-	.phy_setup = ksz9477_phy_setup,
 	.port_setup = ksz9477_port_setup,
 	.r_mib_cnt = ksz9477_r_mib_cnt,
 	.r_mib_pkt = ksz9477_r_mib_pkt,
@@ -1599,7 +1581,29 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
 
 int ksz9477_switch_register(struct ksz_device *dev)
 {
-	return ksz_switch_register(dev, &ksz9477_dev_ops);
+	int ret, i;
+	struct phy_device *phydev;
+
+	ret = ksz_switch_register(dev, &ksz9477_dev_ops);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < dev->phy_port_cnt; ++i) {
+		if (!dsa_is_user_port(dev->ds, i))
+			continue;
+
+		phydev = dsa_to_port(dev->ds, i)->slave->phydev;
+
+		/* The MAC actually cannot run in 1000 half-duplex mode. */
+		phy_remove_link_mode(phydev,
+				     ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+
+		/* PHY does not support gigabit. */
+		if (!(dev->features & GBIT_SUPPORT))
+			phy_remove_link_mode(phydev,
+					     ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
+	}
+	return ret;
 }
 EXPORT_SYMBOL(ksz9477_switch_register);
 
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 74f2216989ee..8d53b12d40a8 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -349,8 +349,6 @@ int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 
 	/* setup slave port */
 	dev->dev_ops->port_setup(dev, port, false);
-	if (dev->dev_ops->phy_setup)
-		dev->dev_ops->phy_setup(dev, port, phy);
 
 	/* port_stp_state_set() will be called after to enable the port so
 	 * there is no need to do anything.
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index f7d92c1656b8..206838160f49 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -115,8 +115,6 @@ struct ksz_dev_ops {
 	u32 (*get_port_addr)(int port, int offset);
 	void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member);
 	void (*flush_dyn_mac_table)(struct ksz_device *dev, int port);
-	void (*phy_setup)(struct ksz_device *dev, int port,
-			  struct phy_device *phy);
 	void (*port_cleanup)(struct ksz_device *dev, int port);
 	void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port);
 	void (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index b8a3e8c88c07..7a71c9902e73 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -664,8 +664,11 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port,
 				 const struct phylink_link_state *state)
 {
 	struct mv88e6xxx_chip *chip = ds->priv;
+	struct mv88e6xxx_port *p;
 	int err;
 
+	p = &chip->ports[port];
+
 	/* FIXME: is this the correct test? If we're in fixed mode on an
 	 * internal port, why should we process this any different from
 	 * PHY mode? On the other hand, the port may be automedia between
@@ -675,10 +678,14 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port,
 		return;
 
 	mv88e6xxx_reg_lock(chip);
-	/* FIXME: should we force the link down here - but if we do, how
-	 * do we restore the link force/unforce state? The driver layering
-	 * gets in the way.
+	/* In inband mode, the link may come up at any time while the link
+	 * is not forced down. Force the link down while we reconfigure the
+	 * interface mode.
 	 */
+	if (mode == MLO_AN_INBAND && p->interface != state->interface &&
+	    chip->info->ops->port_set_link)
+		chip->info->ops->port_set_link(chip, port, LINK_FORCED_DOWN);
+
 	err = mv88e6xxx_port_config_interface(chip, port, state->interface);
 	if (err && err != -EOPNOTSUPP)
 		goto err_unlock;
@@ -691,6 +698,15 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port,
 	if (err > 0)
 		err = 0;
 
+	/* Undo the forced down state above after completing configuration
+	 * irrespective of its state on entry, which allows the link to come up.
+	 */
+	if (mode == MLO_AN_INBAND && p->interface != state->interface &&
+	    chip->info->ops->port_set_link)
+		chip->info->ops->port_set_link(chip, port, LINK_UNFORCED);
+
+	p->interface = state->interface;
+
 err_unlock:
 	mv88e6xxx_reg_unlock(chip);
 
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index 2d70eac30e58..823ae89e5fca 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -232,6 +232,7 @@ struct mv88e6xxx_port {
 	u64 atu_full_violation;
 	u64 vtu_member_violation;
 	u64 vtu_miss_violation;
+	phy_interface_t interface;
 	u8 cmode;
 	bool mirror_ingress;
 	bool mirror_egress;