net: dsa: rtl8366rb: Rewrite weird VLAN filering enablement

While we were defining one VLAN per port for isolating the ports
the port_vlan_filtering() callback was implemented to enable a
VLAN on the port + 1. This function makes no sense, not only is
it incomplete as it only enables the VLAN, it doesn't do what
the callback is supposed to do, which is to selectively enable
and disable filtering on a certain port.

Implement the correct callback: we have two registers dealing
with filtering on the RTL9366RB, so we implement an ASIC-specific
callback and implement filering using the register bit that makes
the switch drop frames if the port is not in the VLAN member set.

The DSA documentation Documentation/networking/switchdev.rst states:

  When the bridge has VLAN filtering enabled and a PVID is not
  configured on the ingress port, untagged and 802.1p tagged
  packets must be dropped. When the bridge has VLAN filtering
  enabled and a PVID exists on the ingress port, untagged and
  priority-tagged packets must be accepted and forwarded according
  to the bridge's port membership of the PVID VLAN. When the
  bridge has VLAN filtering disabled, the presence/lack of a
  PVID should not influence the packet forwarding decision.

To comply with this, we add two arrays of bool in the RTL8366RB
state that keeps track of if filtering and PVID is enabled or
not for each port. We then add code such that whenever filtering
or PVID changes, we update the filter according to the
specification.

Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 35 deletions

diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index 59c5bc4f7b71..0672dd56c698 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -292,41 +292,6 @@ int rtl8366_reset_vlan(struct realtek_smi *smi)
 }
 EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);
 
-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
-			   struct netlink_ext_ack *extack)
-{
-	struct realtek_smi *smi = ds->priv;
-	struct rtl8366_vlan_4k vlan4k;
-	int ret;
-
-	/* Use VLAN nr port + 1 since VLAN0 is not valid */
-	if (!smi->ops->is_vlan_valid(smi, port + 1))
-		return -EINVAL;
-
-	dev_info(smi->dev, "%s filtering on port %d\n",
-		 vlan_filtering ? "enable" : "disable",
-		 port);
-
-	/* TODO:
-	 * The hardware support filter ID (FID) 0..7, I have no clue how to
-	 * support this in the driver when the callback only says on/off.
-	 */
-	ret = smi->ops->get_vlan_4k(smi, port + 1, &vlan4k);
-	if (ret)
-		return ret;
-
-	/* Just set the filter to FID 1 for now then */
-	ret = rtl8366_set_vlan(smi, port + 1,
-			       vlan4k.member,
-			       vlan4k.untag,
-			       1);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering);
-
 int rtl8366_vlan_add(struct dsa_switch *ds, int port,
 		     const struct switchdev_obj_port_vlan *vlan,
 		     struct netlink_ext_ack *extack)