net: dsa: microchip: add DSA support for microchip LAN937x

Basic DSA driver support for lan937x and the device will be
configured through SPI interface.
It adds the lan937x_dev_ops in ksz_common.c file and tries to reuse the
functionality of ksz9477 series switch.

drivers/net/dsa/microchip/ path is already part of MAINTAINERS &
the new files come under this path. Hence no update needed to the
MAINTAINERS

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 128 insertions, 0 deletions

diff --git a/drivers/net/dsa/microchip/lan937x_reg.h b/drivers/net/dsa/microchip/lan937x_reg.h
new file mode 100644
index 000000000000..5e27b2bd2d86
--- /dev/null
+++ b/drivers/net/dsa/microchip/lan937x_reg.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Microchip LAN937X switch register definitions
+ * Copyright (C) 2019-2021 Microchip Technology Inc.
+ */
+#ifndef __LAN937X_REG_H
+#define __LAN937X_REG_H
+
+#define PORT_CTRL_ADDR(port, addr)	((addr) | (((port) + 1)  << 12))
+
+/* 0 - Operation */
+#define REG_SW_INT_STATUS__4		0x0010
+#define REG_SW_INT_MASK__4		0x0014
+
+#define LUE_INT				BIT(31)
+#define TRIG_TS_INT			BIT(30)
+#define APB_TIMEOUT_INT			BIT(29)
+#define OVER_TEMP_INT			BIT(28)
+#define HSR_INT				BIT(27)
+#define PIO_INT				BIT(26)
+#define POR_READY_INT			BIT(25)
+
+#define SWITCH_INT_MASK			\
+	(LUE_INT | TRIG_TS_INT | APB_TIMEOUT_INT | OVER_TEMP_INT | HSR_INT | \
+	 PIO_INT | POR_READY_INT)
+
+#define REG_SW_PORT_INT_STATUS__4	0x0018
+#define REG_SW_PORT_INT_MASK__4		0x001C
+
+/* 1 - Global */
+#define REG_SW_GLOBAL_OUTPUT_CTRL__1	0x0103
+#define SW_CLK125_ENB			BIT(1)
+#define SW_CLK25_ENB			BIT(0)
+
+/* 3 - Operation Control */
+#define REG_SW_OPERATION		0x0300
+
+#define SW_DOUBLE_TAG			BIT(7)
+#define SW_OVER_TEMP_ENABLE		BIT(2)
+#define SW_RESET			BIT(1)
+
+#define REG_SW_LUE_CTRL_0		0x0310
+
+#define SW_VLAN_ENABLE			BIT(7)
+#define SW_DROP_INVALID_VID		BIT(6)
+#define SW_AGE_CNT_M			0x7
+#define SW_AGE_CNT_S			3
+#define SW_RESV_MCAST_ENABLE		BIT(2)
+
+#define REG_SW_LUE_CTRL_1		0x0311
+
+#define UNICAST_LEARN_DISABLE		BIT(7)
+#define SW_FLUSH_STP_TABLE		BIT(5)
+#define SW_FLUSH_MSTP_TABLE		BIT(4)
+#define SW_SRC_ADDR_FILTER		BIT(3)
+#define SW_AGING_ENABLE			BIT(2)
+#define SW_FAST_AGING			BIT(1)
+#define SW_LINK_AUTO_AGING		BIT(0)
+
+#define REG_SW_MAC_CTRL_0		0x0330
+#define SW_NEW_BACKOFF			BIT(7)
+#define SW_PAUSE_UNH_MODE		BIT(1)
+#define SW_AGGR_BACKOFF			BIT(0)
+
+#define REG_SW_MAC_CTRL_1		0x0331
+#define SW_SHORT_IFG			BIT(7)
+#define MULTICAST_STORM_DISABLE		BIT(6)
+#define SW_BACK_PRESSURE		BIT(5)
+#define FAIR_FLOW_CTRL			BIT(4)
+#define NO_EXC_COLLISION_DROP		BIT(3)
+#define SW_LEGAL_PACKET_DISABLE		BIT(1)
+#define SW_PASS_SHORT_FRAME		BIT(0)
+
+#define REG_SW_MAC_CTRL_6		0x0336
+#define SW_MIB_COUNTER_FLUSH		BIT(7)
+#define SW_MIB_COUNTER_FREEZE		BIT(6)
+
+/* 4 - LUE */
+#define REG_SW_ALU_STAT_CTRL__4		0x041C
+
+#define REG_SW_ALU_VAL_B		0x0424
+#define ALU_V_OVERRIDE			BIT(31)
+#define ALU_V_USE_FID			BIT(30)
+#define ALU_V_PORT_MAP			0xFF
+
+/* Port Registers */
+
+/* 0 - Operation */
+#define REG_PORT_CTRL_0			0x0020
+
+#define PORT_MAC_LOOPBACK		BIT(7)
+#define PORT_MAC_REMOTE_LOOPBACK	BIT(6)
+#define PORT_K2L_INSERT_ENABLE		BIT(5)
+#define PORT_K2L_DEBUG_ENABLE		BIT(4)
+#define PORT_TAIL_TAG_ENABLE		BIT(2)
+#define PORT_QUEUE_SPLIT_ENABLE		0x3
+
+/* 3 - xMII */
+#define REG_PORT_XMII_CTRL_0		0x0300
+#define PORT_SGMII_SEL			BIT(7)
+#define PORT_MII_FULL_DUPLEX		BIT(6)
+#define PORT_MII_TX_FLOW_CTRL		BIT(5)
+#define PORT_MII_100MBIT		BIT(4)
+#define PORT_MII_RX_FLOW_CTRL		BIT(3)
+#define PORT_GRXC_ENABLE		BIT(0)
+
+/* 4 - MAC */
+#define REG_PORT_MAC_CTRL_0		0x0400
+#define PORT_CHECK_LENGTH		BIT(2)
+#define PORT_BROADCAST_STORM		BIT(1)
+#define PORT_JUMBO_PACKET		BIT(0)
+
+#define REG_PORT_MAC_CTRL_1		0x0401
+#define PORT_BACK_PRESSURE		BIT(3)
+#define PORT_PASS_ALL			BIT(0)
+
+/* 8 - Classification and Policing */
+#define REG_PORT_MRI_PRIO_CTRL		0x0801
+#define PORT_HIGHEST_PRIO		BIT(7)
+#define PORT_OR_PRIO			BIT(6)
+#define PORT_MAC_PRIO_ENABLE		BIT(4)
+#define PORT_VLAN_PRIO_ENABLE		BIT(3)
+#define PORT_802_1P_PRIO_ENABLE		BIT(2)
+#define PORT_DIFFSERV_PRIO_ENABLE	BIT(1)
+#define PORT_ACL_PRIO_ENABLE		BIT(0)
+
+#define P_PRIO_CTRL			REG_PORT_MRI_PRIO_CTRL
+
+#endif