Add support for the latest 1G/10G Chelsio adapter, T3.

This driver is required by the Chelsio T3 RDMA driver posted by
Steve Wise.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 208 insertions, 0 deletions

diff --git a/drivers/net/cxgb3/vsc8211.c b/drivers/net/cxgb3/vsc8211.c
new file mode 100644
index 000000000000..6a0a815b89c1
--- /dev/null
+++ b/drivers/net/cxgb3/vsc8211.c
@@ -0,0 +1,208 @@
+/*
+ * This file is part of the Chelsio T3 Ethernet driver.
+ *
+ * Copyright (C) 2005-2006 Chelsio Communications.  All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the LICENSE file included in this
+ * release for licensing terms and conditions.
+ */
+
+#include "common.h"
+
+/* VSC8211 PHY specific registers. */
+enum {
+	VSC8211_INTR_ENABLE = 25,
+	VSC8211_INTR_STATUS = 26,
+	VSC8211_AUX_CTRL_STAT = 28,
+};
+
+enum {
+	VSC_INTR_RX_ERR = 1 << 0,
+	VSC_INTR_MS_ERR = 1 << 1,	/* master/slave resolution error */
+	VSC_INTR_CABLE = 1 << 2,	/* cable impairment */
+	VSC_INTR_FALSE_CARR = 1 << 3,	/* false carrier */
+	VSC_INTR_MEDIA_CHG = 1 << 4,	/* AMS media change */
+	VSC_INTR_RX_FIFO = 1 << 5,	/* Rx FIFO over/underflow */
+	VSC_INTR_TX_FIFO = 1 << 6,	/* Tx FIFO over/underflow */
+	VSC_INTR_DESCRAMBL = 1 << 7,	/* descrambler lock-lost */
+	VSC_INTR_SYMBOL_ERR = 1 << 8,	/* symbol error */
+	VSC_INTR_NEG_DONE = 1 << 10,	/* autoneg done */
+	VSC_INTR_NEG_ERR = 1 << 11,	/* autoneg error */
+	VSC_INTR_LINK_CHG = 1 << 13,	/* link change */
+	VSC_INTR_ENABLE = 1 << 15,	/* interrupt enable */
+};
+
+#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \
+	 		   VSC_INTR_NEG_DONE)
+#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \
+		   VSC_INTR_ENABLE)
+
+/* PHY specific auxiliary control & status register fields */
+#define S_ACSR_ACTIPHY_TMR    0
+#define M_ACSR_ACTIPHY_TMR    0x3
+#define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR)
+
+#define S_ACSR_SPEED    3
+#define M_ACSR_SPEED    0x3
+#define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED)
+
+#define S_ACSR_DUPLEX 5
+#define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX)
+
+#define S_ACSR_ACTIPHY 6
+#define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY)
+
+/*
+ * Reset the PHY.  This PHY completes reset immediately so we never wait.
+ */
+static int vsc8211_reset(struct cphy *cphy, int wait)
+{
+	return t3_phy_reset(cphy, 0, 0);
+}
+
+static int vsc8211_intr_enable(struct cphy *cphy)
+{
+	return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, INTR_MASK);
+}
+
+static int vsc8211_intr_disable(struct cphy *cphy)
+{
+	return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, 0);
+}
+
+static int vsc8211_intr_clear(struct cphy *cphy)
+{
+	u32 val;
+
+	/* Clear PHY interrupts by reading the register. */
+	return mdio_read(cphy, 0, VSC8211_INTR_STATUS, &val);
+}
+
+static int vsc8211_autoneg_enable(struct cphy *cphy)
+{
+	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
+				   BMCR_ANENABLE | BMCR_ANRESTART);
+}
+
+static int vsc8211_autoneg_restart(struct cphy *cphy)
+{
+	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
+				   BMCR_ANRESTART);
+}
+
+static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
+				   int *speed, int *duplex, int *fc)
+{
+	unsigned int bmcr, status, lpa, adv;
+	int err, sp = -1, dplx = -1, pause = 0;
+
+	err = mdio_read(cphy, 0, MII_BMCR, &bmcr);
+	if (!err)
+		err = mdio_read(cphy, 0, MII_BMSR, &status);
+	if (err)
+		return err;
+
+	if (link_ok) {
+		/*
+		 * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
+		 * once more to get the current link state.
+		 */
+		if (!(status & BMSR_LSTATUS))
+			err = mdio_read(cphy, 0, MII_BMSR, &status);
+		if (err)
+			return err;
+		*link_ok = (status & BMSR_LSTATUS) != 0;
+	}
+	if (!(bmcr & BMCR_ANENABLE)) {
+		dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+		if (bmcr & BMCR_SPEED1000)
+			sp = SPEED_1000;
+		else if (bmcr & BMCR_SPEED100)
+			sp = SPEED_100;
+		else
+			sp = SPEED_10;
+	} else if (status & BMSR_ANEGCOMPLETE) {
+		err = mdio_read(cphy, 0, VSC8211_AUX_CTRL_STAT, &status);
+		if (err)
+			return err;
+
+		dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
+		sp = G_ACSR_SPEED(status);
+		if (sp == 0)
+			sp = SPEED_10;
+		else if (sp == 1)
+			sp = SPEED_100;
+		else
+			sp = SPEED_1000;
+
+		if (fc && dplx == DUPLEX_FULL) {
+			err = mdio_read(cphy, 0, MII_LPA, &lpa);
+			if (!err)
+				err = mdio_read(cphy, 0, MII_ADVERTISE, &adv);
+			if (err)
+				return err;
+
+			if (lpa & adv & ADVERTISE_PAUSE_CAP)
+				pause = PAUSE_RX | PAUSE_TX;
+			else if ((lpa & ADVERTISE_PAUSE_CAP) &&
+				 (lpa & ADVERTISE_PAUSE_ASYM) &&
+				 (adv & ADVERTISE_PAUSE_ASYM))
+				pause = PAUSE_TX;
+			else if ((lpa & ADVERTISE_PAUSE_ASYM) &&
+				 (adv & ADVERTISE_PAUSE_CAP))
+				pause = PAUSE_RX;
+		}
+	}
+	if (speed)
+		*speed = sp;
+	if (duplex)
+		*duplex = dplx;
+	if (fc)
+		*fc = pause;
+	return 0;
+}
+
+static int vsc8211_power_down(struct cphy *cphy, int enable)
+{
+	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN,
+				   enable ? BMCR_PDOWN : 0);
+}
+
+static int vsc8211_intr_handler(struct cphy *cphy)
+{
+	unsigned int cause;
+	int err, cphy_cause = 0;
+
+	err = mdio_read(cphy, 0, VSC8211_INTR_STATUS, &cause);
+	if (err)
+		return err;
+
+	cause &= INTR_MASK;
+	if (cause & CFG_CHG_INTR_MASK)
+		cphy_cause |= cphy_cause_link_change;
+	if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO))
+		cphy_cause |= cphy_cause_fifo_error;
+	return cphy_cause;
+}
+
+static struct cphy_ops vsc8211_ops = {
+	.reset = vsc8211_reset,
+	.intr_enable = vsc8211_intr_enable,
+	.intr_disable = vsc8211_intr_disable,
+	.intr_clear = vsc8211_intr_clear,
+	.intr_handler = vsc8211_intr_handler,
+	.autoneg_enable = vsc8211_autoneg_enable,
+	.autoneg_restart = vsc8211_autoneg_restart,
+	.advertise = t3_phy_advertise,
+	.set_speed_duplex = t3_set_phy_speed_duplex,
+	.get_link_status = vsc8211_get_link_status,
+	.power_down = vsc8211_power_down,
+};
+
+void t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
+			 int phy_addr, const struct mdio_ops *mdio_ops)
+{
+	cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops);
+}