summaryrefslogtreecommitdiff
path: root/drivers/net/can
diff options
context:
space:
mode:
authorAnilKumar Ch <anilkumar@ti.com>2012-05-29 09:43:16 +0400
committerMarc Kleine-Budde <mkl@pengutronix.de>2012-06-07 12:02:27 +0400
commit69927fccd96b15bd228bb82d356a7a2a0cfaeefb (patch)
treeef9487a9cab32ed0baa50749b4dbbe2232e0af99 /drivers/net/can
parent33f8100977693fa09c2a32b1ca6dbf4d6eabdd0c (diff)
downloadlinux-69927fccd96b15bd228bb82d356a7a2a0cfaeefb.tar.xz
can: c_can: Add support for Bosch D_CAN controller
This patch adds the support for D_CAN controller driver to the existing C_CAN driver. Bosch D_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch D_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ ipmodules_1/can/d_can_users_manual_111.pdf A new array is added for accessing the d_can registers, according to d_can controller register space. Current D_CAN implementation has following limitations, this is done to avoid large changes to the C_CAN driver. 1. Message objects are limited to 32, 16 for RX and 16 for TX. C_CAN IP supports upto 32 message objects but in case of D_CAN we can configure upto 128 message objects. 2. Using two 16bit reads/writes for accessing the 32bit D_CAN registers. 3. These patches have been tested on little endian machine, there might be some hidden endian-related issues due to the nature of the accesses (32-bit registers accessed as 2 16-bit registers). However, I do not have a big-endian D_CAN implementation to confirm. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers/net/can')
-rw-r--r--drivers/net/can/c_can/Kconfig13
-rw-r--r--drivers/net/can/c_can/c_can.h45
-rw-r--r--drivers/net/can/c_can/c_can_platform.c55
3 files changed, 94 insertions, 19 deletions
diff --git a/drivers/net/can/c_can/Kconfig b/drivers/net/can/c_can/Kconfig
index ffb9773d102d..25d371cf98dd 100644
--- a/drivers/net/can/c_can/Kconfig
+++ b/drivers/net/can/c_can/Kconfig
@@ -1,15 +1,16 @@
menuconfig CAN_C_CAN
- tristate "Bosch C_CAN devices"
+ tristate "Bosch C_CAN/D_CAN devices"
depends on CAN_DEV && HAS_IOMEM
if CAN_C_CAN
config CAN_C_CAN_PLATFORM
- tristate "Generic Platform Bus based C_CAN driver"
+ tristate "Generic Platform Bus based C_CAN/D_CAN driver"
---help---
- This driver adds support for the C_CAN chips connected to
- the "platform bus" (Linux abstraction for directly to the
+ This driver adds support for the C_CAN/D_CAN chips connected
+ to the "platform bus" (Linux abstraction for directly to the
processor attached devices) which can be found on various
- boards from ST Microelectronics (http://www.st.com)
- like the SPEAr1310 and SPEAr320 evaluation boards.
+ boards from ST Microelectronics (http://www.st.com) like the
+ SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com)
+ boards like am335x, dm814x, dm813x and dm811x.
endif
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index d1e141e3b99c..01a7049ab990 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -102,6 +102,51 @@ static const u16 reg_map_c_can[] = {
[C_CAN_MSGVAL2_REG] = 0xB2,
};
+static const u16 reg_map_d_can[] = {
+ [C_CAN_CTRL_REG] = 0x00,
+ [C_CAN_STS_REG] = 0x04,
+ [C_CAN_ERR_CNT_REG] = 0x08,
+ [C_CAN_BTR_REG] = 0x0C,
+ [C_CAN_BRPEXT_REG] = 0x0E,
+ [C_CAN_INT_REG] = 0x10,
+ [C_CAN_TEST_REG] = 0x14,
+ [C_CAN_TXRQST1_REG] = 0x88,
+ [C_CAN_TXRQST2_REG] = 0x8A,
+ [C_CAN_NEWDAT1_REG] = 0x9C,
+ [C_CAN_NEWDAT2_REG] = 0x9E,
+ [C_CAN_INTPND1_REG] = 0xB0,
+ [C_CAN_INTPND2_REG] = 0xB2,
+ [C_CAN_MSGVAL1_REG] = 0xC4,
+ [C_CAN_MSGVAL2_REG] = 0xC6,
+ [C_CAN_IF1_COMREQ_REG] = 0x100,
+ [C_CAN_IF1_COMMSK_REG] = 0x102,
+ [C_CAN_IF1_MASK1_REG] = 0x104,
+ [C_CAN_IF1_MASK2_REG] = 0x106,
+ [C_CAN_IF1_ARB1_REG] = 0x108,
+ [C_CAN_IF1_ARB2_REG] = 0x10A,
+ [C_CAN_IF1_MSGCTRL_REG] = 0x10C,
+ [C_CAN_IF1_DATA1_REG] = 0x110,
+ [C_CAN_IF1_DATA2_REG] = 0x112,
+ [C_CAN_IF1_DATA3_REG] = 0x114,
+ [C_CAN_IF1_DATA4_REG] = 0x116,
+ [C_CAN_IF2_COMREQ_REG] = 0x120,
+ [C_CAN_IF2_COMMSK_REG] = 0x122,
+ [C_CAN_IF2_MASK1_REG] = 0x124,
+ [C_CAN_IF2_MASK2_REG] = 0x126,
+ [C_CAN_IF2_ARB1_REG] = 0x128,
+ [C_CAN_IF2_ARB2_REG] = 0x12A,
+ [C_CAN_IF2_MSGCTRL_REG] = 0x12C,
+ [C_CAN_IF2_DATA1_REG] = 0x130,
+ [C_CAN_IF2_DATA2_REG] = 0x132,
+ [C_CAN_IF2_DATA3_REG] = 0x134,
+ [C_CAN_IF2_DATA4_REG] = 0x136,
+};
+
+enum c_can_dev_id {
+ C_CAN_DEVTYPE,
+ D_CAN_DEVTYPE,
+};
+
/* c_can private data structure */
struct c_can_priv {
struct can_priv can; /* must be the first member */
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index a6e9b937683a..f0921d16f0a9 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -71,6 +71,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
void __iomem *addr;
struct net_device *dev;
struct c_can_priv *priv;
+ const struct platform_device_id *id;
struct resource *mem;
int irq;
#ifdef CONFIG_HAVE_CLK
@@ -115,7 +116,32 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
}
priv = netdev_priv(dev);
- priv->regs = reg_map_c_can;
+ id = platform_get_device_id(pdev);
+ switch (id->driver_data) {
+ case C_CAN_DEVTYPE:
+ priv->regs = reg_map_c_can;
+ switch (mem->flags & IORESOURCE_MEM_TYPE_MASK) {
+ case IORESOURCE_MEM_32BIT:
+ priv->read_reg = c_can_plat_read_reg_aligned_to_32bit;
+ priv->write_reg = c_can_plat_write_reg_aligned_to_32bit;
+ break;
+ case IORESOURCE_MEM_16BIT:
+ default:
+ priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
+ priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
+ break;
+ }
+ break;
+ case D_CAN_DEVTYPE:
+ priv->regs = reg_map_d_can;
+ priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
+ priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
+ priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
+ break;
+ default:
+ ret = -EINVAL;
+ goto exit_free_device;
+ }
dev->irq = irq;
priv->base = addr;
@@ -124,18 +150,6 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
priv->priv = clk;
#endif
- switch (mem->flags & IORESOURCE_MEM_TYPE_MASK) {
- case IORESOURCE_MEM_32BIT:
- priv->read_reg = c_can_plat_read_reg_aligned_to_32bit;
- priv->write_reg = c_can_plat_write_reg_aligned_to_32bit;
- break;
- case IORESOURCE_MEM_16BIT:
- default:
- priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
- priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
- break;
- }
-
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
@@ -189,6 +203,20 @@ static int __devexit c_can_plat_remove(struct platform_device *pdev)
return 0;
}
+static const struct platform_device_id c_can_id_table[] = {
+ {
+ .name = KBUILD_MODNAME,
+ .driver_data = C_CAN_DEVTYPE,
+ }, {
+ .name = "c_can",
+ .driver_data = C_CAN_DEVTYPE,
+ }, {
+ .name = "d_can",
+ .driver_data = D_CAN_DEVTYPE,
+ }, {
+ }
+};
+
static struct platform_driver c_can_plat_driver = {
.driver = {
.name = KBUILD_MODNAME,
@@ -196,6 +224,7 @@ static struct platform_driver c_can_plat_driver = {
},
.probe = c_can_plat_probe,
.remove = __devexit_p(c_can_plat_remove),
+ .id_table = c_can_id_table,
};
module_platform_driver(c_can_plat_driver);