Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...

8 files changed, 117 insertions, 115 deletions

diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c
index 36d298da2af6..3752342a678a 100644
--- a/drivers/net/can/sja1000/ems_pci.c
+++ b/drivers/net/can/sja1000/ems_pci.c
@@ -168,12 +168,12 @@ static inline int ems_pci_check_chan(const struct sja1000_priv *priv)
 	unsigned char res;
 
 	/* Make sure SJA1000 is in reset mode */
-	priv->write_reg(priv, REG_MOD, 1);
+	priv->write_reg(priv, SJA1000_MOD, 1);
 
-	priv->write_reg(priv, REG_CDR, CDR_PELICAN);
+	priv->write_reg(priv, SJA1000_CDR, CDR_PELICAN);
 
 	/* read reset-values */
-	res = priv->read_reg(priv, REG_CDR);
+	res = priv->read_reg(priv, SJA1000_CDR);
 
 	if (res == CDR_PELICAN)
 		return 1;
diff --git a/drivers/net/can/sja1000/ems_pcmcia.c b/drivers/net/can/sja1000/ems_pcmcia.c
index 321c27e1c7fc..9e535f2ef52b 100644
--- a/drivers/net/can/sja1000/ems_pcmcia.c
+++ b/drivers/net/can/sja1000/ems_pcmcia.c
@@ -126,11 +126,11 @@ static irqreturn_t ems_pcmcia_interrupt(int irq, void *dev_id)
 static inline int ems_pcmcia_check_chan(struct sja1000_priv *priv)
 {
 	/* Make sure SJA1000 is in reset mode */
-	ems_pcmcia_write_reg(priv, REG_MOD, 1);
-	ems_pcmcia_write_reg(priv, REG_CDR, CDR_PELICAN);
+	ems_pcmcia_write_reg(priv, SJA1000_MOD, 1);
+	ems_pcmcia_write_reg(priv, SJA1000_CDR, CDR_PELICAN);
 
 	/* read reset-values */
-	if (ems_pcmcia_read_reg(priv, REG_CDR) == CDR_PELICAN)
+	if (ems_pcmcia_read_reg(priv, SJA1000_CDR) == CDR_PELICAN)
 		return 1;
 
 	return 0;
diff --git a/drivers/net/can/sja1000/kvaser_pci.c b/drivers/net/can/sja1000/kvaser_pci.c
index 37b0381f532e..217585b97cd3 100644
--- a/drivers/net/can/sja1000/kvaser_pci.c
+++ b/drivers/net/can/sja1000/kvaser_pci.c
@@ -159,9 +159,9 @@ static int number_of_sja1000_chip(void __iomem *base_addr)
 	for (i = 0; i < MAX_NO_OF_CHANNELS; i++) {
 		/* reset chip */
 		iowrite8(MOD_RM, base_addr +
-			 (i * KVASER_PCI_PORT_BYTES) + REG_MOD);
+			 (i * KVASER_PCI_PORT_BYTES) + SJA1000_MOD);
 		status = ioread8(base_addr +
-				 (i * KVASER_PCI_PORT_BYTES) + REG_MOD);
+				 (i * KVASER_PCI_PORT_BYTES) + SJA1000_MOD);
 		/* check reset bit */
 		if (!(status & MOD_RM))
 			break;
diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index d1e7f1006ddd..6b6f0ad75090 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -402,7 +402,7 @@ static void peak_pciec_write_reg(const struct sja1000_priv *priv,
 	int c = (priv->reg_base - card->reg_base) / PEAK_PCI_CHAN_SIZE;
 
 	/* sja1000 register changes control the leds state */
-	if (port == REG_MOD)
+	if (port == SJA1000_MOD)
 		switch (val) {
 		case MOD_RM:
 			/* Reset Mode: set led on */
diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c
index 0a707f70661c..f7ad754dd2aa 100644
--- a/drivers/net/can/sja1000/peak_pcmcia.c
+++ b/drivers/net/can/sja1000/peak_pcmcia.c
@@ -196,7 +196,7 @@ static void pcan_write_canreg(const struct sja1000_priv *priv, int port, u8 v)
 	int c = (priv->reg_base - card->ioport_addr) / PCC_CHAN_SIZE;
 
 	/* sja1000 register changes control the leds state */
-	if (port == REG_MOD)
+	if (port == SJA1000_MOD)
 		switch (v) {
 		case MOD_RM:
 			/* Reset Mode: set led on */
@@ -509,11 +509,11 @@ static void pcan_free_channels(struct pcan_pccard *card)
 static inline int pcan_channel_present(struct sja1000_priv *priv)
 {
 	/* make sure SJA1000 is in reset mode */
-	pcan_write_canreg(priv, REG_MOD, 1);
-	pcan_write_canreg(priv, REG_CDR, CDR_PELICAN);
+	pcan_write_canreg(priv, SJA1000_MOD, 1);
+	pcan_write_canreg(priv, SJA1000_CDR, CDR_PELICAN);
 
 	/* read reset-values */
-	if (pcan_read_canreg(priv, REG_CDR) == CDR_PELICAN)
+	if (pcan_read_canreg(priv, SJA1000_CDR) == CDR_PELICAN)
 		return 1;
 
 	return 0;
diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
index 3c18d7d000ed..c52c1e96bf90 100644
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -348,20 +348,20 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
 	 */
 	if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
 	    REG_CR_BASICCAN_INITIAL &&
-	    (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) &&
-	    (priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
+	    (priv->read_reg(priv, SJA1000_SR) == REG_SR_BASICCAN_INITIAL) &&
+	    (priv->read_reg(priv, SJA1000_IR) == REG_IR_BASICCAN_INITIAL))
 		flag = 1;
 
 	/* Bring the SJA1000 into the PeliCAN mode*/
-	priv->write_reg(priv, REG_CDR, CDR_PELICAN);
+	priv->write_reg(priv, SJA1000_CDR, CDR_PELICAN);
 
 	/*
 	 * Check registers after reset in the PeliCAN mode.
 	 * See states on p. 23 of the Datasheet.
 	 */
-	if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
-	    priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL &&
-	    priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
+	if (priv->read_reg(priv, SJA1000_MOD) == REG_MOD_PELICAN_INITIAL &&
+	    priv->read_reg(priv, SJA1000_SR) == REG_SR_PELICAN_INITIAL &&
+	    priv->read_reg(priv, SJA1000_IR) == REG_IR_PELICAN_INITIAL)
 		return flag;
 
 	return 0;
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index e4df307eaa90..7164a999f50f 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -91,14 +91,14 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val)
 	 * the write_reg() operation - especially on SMP systems.
 	 */
 	spin_lock_irqsave(&priv->cmdreg_lock, flags);
-	priv->write_reg(priv, REG_CMR, val);
-	priv->read_reg(priv, SJA1000_REG_SR);
+	priv->write_reg(priv, SJA1000_CMR, val);
+	priv->read_reg(priv, SJA1000_SR);
 	spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
 }
 
 static int sja1000_is_absent(struct sja1000_priv *priv)
 {
-	return (priv->read_reg(priv, REG_MOD) == 0xFF);
+	return (priv->read_reg(priv, SJA1000_MOD) == 0xFF);
 }
 
 static int sja1000_probe_chip(struct net_device *dev)
@@ -116,11 +116,11 @@ static int sja1000_probe_chip(struct net_device *dev)
 static void set_reset_mode(struct net_device *dev)
 {
 	struct sja1000_priv *priv = netdev_priv(dev);
-	unsigned char status = priv->read_reg(priv, REG_MOD);
+	unsigned char status = priv->read_reg(priv, SJA1000_MOD);
 	int i;
 
 	/* disable interrupts */
-	priv->write_reg(priv, REG_IER, IRQ_OFF);
+	priv->write_reg(priv, SJA1000_IER, IRQ_OFF);
 
 	for (i = 0; i < 100; i++) {
 		/* check reset bit */
@@ -129,9 +129,10 @@ static void set_reset_mode(struct net_device *dev)
 			return;
 		}
 
-		priv->write_reg(priv, REG_MOD, MOD_RM);	/* reset chip */
+		/* reset chip */
+		priv->write_reg(priv, SJA1000_MOD, MOD_RM);
 		udelay(10);
-		status = priv->read_reg(priv, REG_MOD);
+		status = priv->read_reg(priv, SJA1000_MOD);
 	}
 
 	netdev_err(dev, "setting SJA1000 into reset mode failed!\n");
@@ -140,7 +141,7 @@ static void set_reset_mode(struct net_device *dev)
 static void set_normal_mode(struct net_device *dev)
 {
 	struct sja1000_priv *priv = netdev_priv(dev);
-	unsigned char status = priv->read_reg(priv, REG_MOD);
+	unsigned char status = priv->read_reg(priv, SJA1000_MOD);
 	int i;
 
 	for (i = 0; i < 100; i++) {
@@ -149,22 +150,22 @@ static void set_normal_mode(struct net_device *dev)
 			priv->can.state = CAN_STATE_ERROR_ACTIVE;
 			/* enable interrupts */
 			if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
-				priv->write_reg(priv, REG_IER, IRQ_ALL);
+				priv->write_reg(priv, SJA1000_IER, IRQ_ALL);
 			else
-				priv->write_reg(priv, REG_IER,
+				priv->write_reg(priv, SJA1000_IER,
 						IRQ_ALL & ~IRQ_BEI);
 			return;
 		}
 
 		/* set chip to normal mode */
 		if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
-			priv->write_reg(priv, REG_MOD, MOD_LOM);
+			priv->write_reg(priv, SJA1000_MOD, MOD_LOM);
 		else
-			priv->write_reg(priv, REG_MOD, 0x00);
+			priv->write_reg(priv, SJA1000_MOD, 0x00);
 
 		udelay(10);
 
-		status = priv->read_reg(priv, REG_MOD);
+		status = priv->read_reg(priv, SJA1000_MOD);
 	}
 
 	netdev_err(dev, "setting SJA1000 into normal mode failed!\n");
@@ -179,9 +180,9 @@ static void sja1000_start(struct net_device *dev)
 		set_reset_mode(dev);
 
 	/* Clear error counters and error code capture */
-	priv->write_reg(priv, REG_TXERR, 0x0);
-	priv->write_reg(priv, REG_RXERR, 0x0);
-	priv->read_reg(priv, REG_ECC);
+	priv->write_reg(priv, SJA1000_TXERR, 0x0);
+	priv->write_reg(priv, SJA1000_RXERR, 0x0);
+	priv->read_reg(priv, SJA1000_ECC);
 
 	/* leave reset mode */
 	set_normal_mode(dev);
@@ -217,8 +218,8 @@ static int sja1000_set_bittiming(struct net_device *dev)
 
 	netdev_info(dev, "setting BTR0=0x%02x BTR1=0x%02x\n", btr0, btr1);
 
-	priv->write_reg(priv, REG_BTR0, btr0);
-	priv->write_reg(priv, REG_BTR1, btr1);
+	priv->write_reg(priv, SJA1000_BTR0, btr0);
+	priv->write_reg(priv, SJA1000_BTR1, btr1);
 
 	return 0;
 }
@@ -228,8 +229,8 @@ static int sja1000_get_berr_counter(const struct net_device *dev,
 {
 	struct sja1000_priv *priv = netdev_priv(dev);
 
-	bec->txerr = priv->read_reg(priv, REG_TXERR);
-	bec->rxerr = priv->read_reg(priv, REG_RXERR);
+	bec->txerr = priv->read_reg(priv, SJA1000_TXERR);
+	bec->rxerr = priv->read_reg(priv, SJA1000_RXERR);
 
 	return 0;
 }
@@ -247,20 +248,20 @@ static void chipset_init(struct net_device *dev)
 	struct sja1000_priv *priv = netdev_priv(dev);
 
 	/* set clock divider and output control register */
-	priv->write_reg(priv, REG_CDR, priv->cdr | CDR_PELICAN);
+	priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
 
 	/* set acceptance filter (accept all) */
-	priv->write_reg(priv, REG_ACCC0, 0x00);
-	priv->write_reg(priv, REG_ACCC1, 0x00);
-	priv->write_reg(priv, REG_ACCC2, 0x00);
-	priv->write_reg(priv, REG_ACCC3, 0x00);
+	priv->write_reg(priv, SJA1000_ACCC0, 0x00);
+	priv->write_reg(priv, SJA1000_ACCC1, 0x00);
+	priv->write_reg(priv, SJA1000_ACCC2, 0x00);
+	priv->write_reg(priv, SJA1000_ACCC3, 0x00);
 
-	priv->write_reg(priv, REG_ACCM0, 0xFF);
-	priv->write_reg(priv, REG_ACCM1, 0xFF);
-	priv->write_reg(priv, REG_ACCM2, 0xFF);
-	priv->write_reg(priv, REG_ACCM3, 0xFF);
+	priv->write_reg(priv, SJA1000_ACCM0, 0xFF);
+	priv->write_reg(priv, SJA1000_ACCM1, 0xFF);
+	priv->write_reg(priv, SJA1000_ACCM2, 0xFF);
+	priv->write_reg(priv, SJA1000_ACCM3, 0xFF);
 
-	priv->write_reg(priv, REG_OCR, priv->ocr | OCR_MODE_NORMAL);
+	priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL);
 }
 
 /*
@@ -289,21 +290,21 @@ static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb,
 	id = cf->can_id;
 
 	if (id & CAN_RTR_FLAG)
-		fi |= FI_RTR;
+		fi |= SJA1000_FI_RTR;
 
 	if (id & CAN_EFF_FLAG) {
-		fi |= FI_FF;
-		dreg = EFF_BUF;
-		priv->write_reg(priv, REG_FI, fi);
-		priv->write_reg(priv, REG_ID1, (id & 0x1fe00000) >> (5 + 16));
-		priv->write_reg(priv, REG_ID2, (id & 0x001fe000) >> (5 + 8));
-		priv->write_reg(priv, REG_ID3, (id & 0x00001fe0) >> 5);
-		priv->write_reg(priv, REG_ID4, (id & 0x0000001f) << 3);
+		fi |= SJA1000_FI_FF;
+		dreg = SJA1000_EFF_BUF;
+		priv->write_reg(priv, SJA1000_FI, fi);
+		priv->write_reg(priv, SJA1000_ID1, (id & 0x1fe00000) >> 21);
+		priv->write_reg(priv, SJA1000_ID2, (id & 0x001fe000) >> 13);
+		priv->write_reg(priv, SJA1000_ID3, (id & 0x00001fe0) >> 5);
+		priv->write_reg(priv, SJA1000_ID4, (id & 0x0000001f) << 3);
 	} else {
-		dreg = SFF_BUF;
-		priv->write_reg(priv, REG_FI, fi);
-		priv->write_reg(priv, REG_ID1, (id & 0x000007f8) >> 3);
-		priv->write_reg(priv, REG_ID2, (id & 0x00000007) << 5);
+		dreg = SJA1000_SFF_BUF;
+		priv->write_reg(priv, SJA1000_FI, fi);
+		priv->write_reg(priv, SJA1000_ID1, (id & 0x000007f8) >> 3);
+		priv->write_reg(priv, SJA1000_ID2, (id & 0x00000007) << 5);
 	}
 
 	for (i = 0; i < dlc; i++)
@@ -335,25 +336,25 @@ static void sja1000_rx(struct net_device *dev)
 	if (skb == NULL)
 		return;
 
-	fi = priv->read_reg(priv, REG_FI);
+	fi = priv->read_reg(priv, SJA1000_FI);
 
-	if (fi & FI_FF) {
+	if (fi & SJA1000_FI_FF) {
 		/* extended frame format (EFF) */
-		dreg = EFF_BUF;
-		id = (priv->read_reg(priv, REG_ID1) << (5 + 16))
-		    | (priv->read_reg(priv, REG_ID2) << (5 + 8))
-		    | (priv->read_reg(priv, REG_ID3) << 5)
-		    | (priv->read_reg(priv, REG_ID4) >> 3);
+		dreg = SJA1000_EFF_BUF;
+		id = (priv->read_reg(priv, SJA1000_ID1) << 21)
+		    | (priv->read_reg(priv, SJA1000_ID2) << 13)
+		    | (priv->read_reg(priv, SJA1000_ID3) << 5)
+		    | (priv->read_reg(priv, SJA1000_ID4) >> 3);
 		id |= CAN_EFF_FLAG;
 	} else {
 		/* standard frame format (SFF) */
-		dreg = SFF_BUF;
-		id = (priv->read_reg(priv, REG_ID1) << 3)
-		    | (priv->read_reg(priv, REG_ID2) >> 5);
+		dreg = SJA1000_SFF_BUF;
+		id = (priv->read_reg(priv, SJA1000_ID1) << 3)
+		    | (priv->read_reg(priv, SJA1000_ID2) >> 5);
 	}
 
 	cf->can_dlc = get_can_dlc(fi & 0x0F);
-	if (fi & FI_RTR) {
+	if (fi & SJA1000_FI_RTR) {
 		id |= CAN_RTR_FLAG;
 	} else {
 		for (i = 0; i < cf->can_dlc; i++)
@@ -414,7 +415,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
 		priv->can.can_stats.bus_error++;
 		stats->rx_errors++;
 
-		ecc = priv->read_reg(priv, REG_ECC);
+		ecc = priv->read_reg(priv, SJA1000_ECC);
 
 		cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
 
@@ -448,7 +449,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
 	if (isrc & IRQ_ALI) {
 		/* arbitration lost interrupt */
 		netdev_dbg(dev, "arbitration lost interrupt\n");
-		alc = priv->read_reg(priv, REG_ALC);
+		alc = priv->read_reg(priv, SJA1000_ALC);
 		priv->can.can_stats.arbitration_lost++;
 		stats->tx_errors++;
 		cf->can_id |= CAN_ERR_LOSTARB;
@@ -457,8 +458,8 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
 
 	if (state != priv->can.state && (state == CAN_STATE_ERROR_WARNING ||
 					 state == CAN_STATE_ERROR_PASSIVE)) {
-		uint8_t rxerr = priv->read_reg(priv, REG_RXERR);
-		uint8_t txerr = priv->read_reg(priv, REG_TXERR);
+		uint8_t rxerr = priv->read_reg(priv, SJA1000_RXERR);
+		uint8_t txerr = priv->read_reg(priv, SJA1000_TXERR);
 		cf->can_id |= CAN_ERR_CRTL;
 		if (state == CAN_STATE_ERROR_WARNING) {
 			priv->can.can_stats.error_warning++;
@@ -494,15 +495,16 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 	int n = 0;
 
 	/* Shared interrupts and IRQ off? */
-	if (priv->read_reg(priv, REG_IER) == IRQ_OFF)
+	if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF)
 		return IRQ_NONE;
 
 	if (priv->pre_irq)
 		priv->pre_irq(priv);
 
-	while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
+	while ((isrc = priv->read_reg(priv, SJA1000_IR)) &&
+	       (n < SJA1000_MAX_IRQ)) {
 		n++;
-		status = priv->read_reg(priv, SJA1000_REG_SR);
+		status = priv->read_reg(priv, SJA1000_SR);
 		/* check for absent controller due to hw unplug */
 		if (status == 0xFF && sja1000_is_absent(priv))
 			return IRQ_NONE;
@@ -519,7 +521,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 			} else {
 				/* transmission complete */
 				stats->tx_bytes +=
-					priv->read_reg(priv, REG_FI) & 0xf;
+					priv->read_reg(priv, SJA1000_FI) & 0xf;
 				stats->tx_packets++;
 				can_get_echo_skb(dev, 0);
 			}
@@ -530,7 +532,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 			/* receive interrupt */
 			while (status & SR_RBS) {
 				sja1000_rx(dev);
-				status = priv->read_reg(priv, SJA1000_REG_SR);
+				status = priv->read_reg(priv, SJA1000_SR);
 				/* check for absent controller */
 				if (status == 0xFF && sja1000_is_absent(priv))
 					return IRQ_NONE;
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index aa48e053da27..9d46398f8154 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -54,46 +54,46 @@
 #define SJA1000_MAX_IRQ 20	/* max. number of interrupts handled in ISR */
 
 /* SJA1000 registers - manual section 6.4 (Pelican Mode) */
-#define REG_MOD		0x00
-#define REG_CMR		0x01
-#define SJA1000_REG_SR		0x02
-#define REG_IR		0x03
-#define REG_IER		0x04
-#define REG_ALC		0x0B
-#define REG_ECC		0x0C
-#define REG_EWL		0x0D
-#define REG_RXERR	0x0E
-#define REG_TXERR	0x0F
-#define REG_ACCC0	0x10
-#define REG_ACCC1	0x11
-#define REG_ACCC2	0x12
-#define REG_ACCC3	0x13
-#define REG_ACCM0	0x14
-#define REG_ACCM1	0x15
-#define REG_ACCM2	0x16
-#define REG_ACCM3	0x17
-#define REG_RMC		0x1D
-#define REG_RBSA	0x1E
+#define SJA1000_MOD		0x00
+#define SJA1000_CMR		0x01
+#define SJA1000_SR		0x02
+#define SJA1000_IR		0x03
+#define SJA1000_IER		0x04
+#define SJA1000_ALC		0x0B
+#define SJA1000_ECC		0x0C
+#define SJA1000_EWL		0x0D
+#define SJA1000_RXERR		0x0E
+#define SJA1000_TXERR		0x0F
+#define SJA1000_ACCC0		0x10
+#define SJA1000_ACCC1		0x11
+#define SJA1000_ACCC2		0x12
+#define SJA1000_ACCC3		0x13
+#define SJA1000_ACCM0		0x14
+#define SJA1000_ACCM1		0x15
+#define SJA1000_ACCM2		0x16
+#define SJA1000_ACCM3		0x17
+#define SJA1000_RMC		0x1D
+#define SJA1000_RBSA		0x1E
 
 /* Common registers - manual section 6.5 */
-#define REG_BTR0	0x06
-#define REG_BTR1	0x07
-#define REG_OCR		0x08
-#define REG_CDR		0x1F
+#define SJA1000_BTR0		0x06
+#define SJA1000_BTR1		0x07
+#define SJA1000_OCR		0x08
+#define SJA1000_CDR		0x1F
 
-#define REG_FI		0x10
-#define SFF_BUF		0x13
-#define EFF_BUF		0x15
+#define SJA1000_FI		0x10
+#define SJA1000_SFF_BUF		0x13
+#define SJA1000_EFF_BUF		0x15
 
-#define FI_FF		0x80
-#define FI_RTR		0x40
+#define SJA1000_FI_FF		0x80
+#define SJA1000_FI_RTR		0x40
 
-#define REG_ID1		0x11
-#define REG_ID2		0x12
-#define REG_ID3		0x13
-#define REG_ID4		0x14
+#define SJA1000_ID1		0x11
+#define SJA1000_ID2		0x12
+#define SJA1000_ID3		0x13
+#define SJA1000_ID4		0x14
 
-#define CAN_RAM		0x20
+#define SJA1000_CAN_RAM		0x20
 
 /* mode register */
 #define MOD_RM		0x01