Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
  bonding: enable netpoll without checking link status
  xfrm: Refcount destination entry on xfrm_lookup
  net: introduce rx_handler results and logic around that
  bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
  bonding: wrap slave state work
  net: get rid of multiple bond-related netdevice->priv_flags
  bonding: register slave pointer for rx_handler
  be2net: Bump up the version number
  be2net: Copyright notice change. Update to Emulex instead of ServerEngines
  e1000e: fix kconfig for crc32 dependency
  netfilter ebtables: fix xt_AUDIT to work with ebtables
  xen network backend driver
  bonding: Improve syslog message at device creation time
  bonding: Call netif_carrier_off after register_netdevice
  bonding: Incorrect TX queue offset
  net_sched: fix ip_tos2prio
  xfrm: fix __xfrm_route_forward()
  be2net: Fix UDP packet detected status in RX compl
  Phonet: fix aligned-mode pipe socket buffer header reserve
  netxen: support for GbE port settings
  ...

Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.

1 files changed, 21 insertions, 13 deletions

diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h
index bedab1a942c4..92f36b6950dc 100644
--- a/drivers/net/bnx2x/bnx2x_link.h
+++ b/drivers/net/bnx2x/bnx2x_link.h
@@ -1,4 +1,4 @@
-/* Copyright 2008-2010 Broadcom Corporation
+/* Copyright 2008-2011 Broadcom Corporation
  *
  * Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
@@ -33,7 +33,7 @@
 #define BNX2X_FLOW_CTRL_BOTH		PORT_FEATURE_FLOW_CONTROL_BOTH
 #define BNX2X_FLOW_CTRL_NONE		PORT_FEATURE_FLOW_CONTROL_NONE
 
-#define SPEED_AUTO_NEG	    0
+#define SPEED_AUTO_NEG		0
 #define SPEED_12000		12000
 #define SPEED_12500		12500
 #define SPEED_13000		13000
@@ -44,8 +44,8 @@
 #define SFP_EEPROM_VENDOR_NAME_SIZE		16
 #define SFP_EEPROM_VENDOR_OUI_ADDR		0x25
 #define SFP_EEPROM_VENDOR_OUI_SIZE		3
-#define SFP_EEPROM_PART_NO_ADDR 		0x28
-#define SFP_EEPROM_PART_NO_SIZE		16
+#define SFP_EEPROM_PART_NO_ADDR			0x28
+#define SFP_EEPROM_PART_NO_SIZE			16
 #define PWR_FLT_ERR_MSG_LEN			250
 
 #define XGXS_EXT_PHY_TYPE(ext_phy_config) \
@@ -62,7 +62,7 @@
 #define SINGLE_MEDIA(params)		(params->num_phys == 2)
 /* Dual Media board contains two external phy with different media */
 #define DUAL_MEDIA(params)		(params->num_phys == 3)
-#define FW_PARAM_MDIO_CTRL_OFFSET 16
+#define FW_PARAM_MDIO_CTRL_OFFSET		16
 #define FW_PARAM_SET(phy_addr, phy_type, mdio_access) \
 	(phy_addr | phy_type | mdio_access << FW_PARAM_MDIO_CTRL_OFFSET)
 
@@ -201,12 +201,14 @@ struct link_params {
 
 	/* Default / User Configuration */
 	u8 loopback_mode;
-#define LOOPBACK_NONE	0
-#define LOOPBACK_EMAC	1
-#define LOOPBACK_BMAC	2
+#define LOOPBACK_NONE		0
+#define LOOPBACK_EMAC		1
+#define LOOPBACK_BMAC		2
 #define LOOPBACK_XGXS		3
 #define LOOPBACK_EXT_PHY	4
-#define LOOPBACK_EXT 	5
+#define LOOPBACK_EXT		5
+#define LOOPBACK_UMAC		6
+#define LOOPBACK_XMAC		7
 
 	/* Device parameters */
 	u8 mac_addr[6];
@@ -230,10 +232,11 @@ struct link_params {
 	/* Phy register parameter */
 	u32 chip_id;
 
+	/* features */
 	u32 feature_config_flags;
-#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
-#define FEATURE_CONFIG_PFC_ENABLED		(1<<1)
-#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY	(1<<2)
+#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED	(1<<0)
+#define FEATURE_CONFIG_PFC_ENABLED			(1<<1)
+#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY		(1<<2)
 #define FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY	(1<<3)
 	/* Will be populated during common init */
 	struct bnx2x_phy phy[MAX_PHYS];
@@ -334,6 +337,11 @@ void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port);
 /* Reset the external of SFX7101 */
 void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy);
 
+/* Read "byte_cnt" bytes from address "addr" from the SFP+ EEPROM */
+u8 bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
+				struct link_params *params, u16 addr,
+				u8 byte_cnt, u8 *o_buf);
+
 void bnx2x_hw_reset_phy(struct link_params *params);
 
 /* Checks if HW lock is required for this phy/board type */
@@ -379,7 +387,7 @@ void bnx2x_ets_disabled(struct link_params *params);
 
 /* Used to configure the ETS to BW limited */
 void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw,
-						const u32 cos1_bw);
+			const u32 cos1_bw);
 
 /* Used to configure the ETS to strict */
 u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos);