Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
  bonding: enable netpoll without checking link status
  xfrm: Refcount destination entry on xfrm_lookup
  net: introduce rx_handler results and logic around that
  bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
  bonding: wrap slave state work
  net: get rid of multiple bond-related netdevice->priv_flags
  bonding: register slave pointer for rx_handler
  be2net: Bump up the version number
  be2net: Copyright notice change. Update to Emulex instead of ServerEngines
  e1000e: fix kconfig for crc32 dependency
  netfilter ebtables: fix xt_AUDIT to work with ebtables
  xen network backend driver
  bonding: Improve syslog message at device creation time
  bonding: Call netif_carrier_off after register_netdevice
  bonding: Incorrect TX queue offset
  net_sched: fix ip_tos2prio
  xfrm: fix __xfrm_route_forward()
  be2net: Fix UDP packet detected status in RX compl
  Phonet: fix aligned-mode pipe socket buffer header reserve
  netxen: support for GbE port settings
  ...

Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.

1 files changed, 2 insertions, 41 deletions

diff --git a/drivers/net/atl1c/atl1c_hw.h b/drivers/net/atl1c/atl1c_hw.h
index 3dd675979aa1..655fc6c4a8a4 100644
--- a/drivers/net/atl1c/atl1c_hw.h
+++ b/drivers/net/atl1c/atl1c_hw.h
@@ -736,55 +736,16 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw);
 #define REG_DEBUG_DATA0 		0x1900
 #define REG_DEBUG_DATA1 		0x1904
 
-/* PHY Control Register */
-#define MII_BMCR			0x00
-#define BMCR_SPEED_SELECT_MSB		0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define BMCR_COLL_TEST_ENABLE		0x0080  /* Collision test enable */
-#define BMCR_FULL_DUPLEX		0x0100  /* FDX =1, half duplex =0 */
-#define BMCR_RESTART_AUTO_NEG		0x0200  /* Restart auto negotiation */
-#define BMCR_ISOLATE			0x0400  /* Isolate PHY from MII */
-#define BMCR_POWER_DOWN			0x0800  /* Power down */
-#define BMCR_AUTO_NEG_EN		0x1000  /* Auto Neg Enable */
-#define BMCR_SPEED_SELECT_LSB		0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define BMCR_LOOPBACK			0x4000  /* 0 = normal, 1 = loopback */
-#define BMCR_RESET			0x8000  /* 0 = normal, 1 = PHY reset */
-#define BMCR_SPEED_MASK			0x2040
-#define BMCR_SPEED_1000			0x0040
-#define BMCR_SPEED_100			0x2000
-#define BMCR_SPEED_10			0x0000
-
-/* PHY Status Register */
-#define MII_BMSR			0x01
-#define BMMSR_EXTENDED_CAPS		0x0001  /* Extended register capabilities */
-#define BMSR_JABBER_DETECT		0x0002  /* Jabber Detected */
-#define BMSR_LINK_STATUS		0x0004  /* Link Status 1 = link */
-#define BMSR_AUTONEG_CAPS		0x0008  /* Auto Neg Capable */
-#define BMSR_REMOTE_FAULT		0x0010  /* Remote Fault Detect */
-#define BMSR_AUTONEG_COMPLETE		0x0020  /* Auto Neg Complete */
-#define BMSR_PREAMBLE_SUPPRESS		0x0040  /* Preamble may be suppressed */
-#define BMSR_EXTENDED_STATUS		0x0100  /* Ext. status info in Reg 0x0F */
-#define BMSR_100T2_HD_CAPS		0x0200  /* 100T2 Half Duplex Capable */
-#define BMSR_100T2_FD_CAPS		0x0400  /* 100T2 Full Duplex Capable */
-#define BMSR_10T_HD_CAPS		0x0800  /* 10T   Half Duplex Capable */
-#define BMSR_10T_FD_CAPS		0x1000  /* 10T   Full Duplex Capable */
-#define BMSR_100X_HD_CAPS		0x2000  /* 100X  Half Duplex Capable */
-#define BMMII_SR_100X_FD_CAPS		0x4000  /* 100X  Full Duplex Capable */
-#define BMMII_SR_100T4_CAPS		0x8000  /* 100T4 Capable */
-
-#define MII_PHYSID1			0x02
-#define MII_PHYSID2			0x03
 #define L1D_MPW_PHYID1			0xD01C  /* V7 */
 #define L1D_MPW_PHYID2			0xD01D  /* V1-V6 */
 #define L1D_MPW_PHYID3			0xD01E  /* V8 */
 
 
 /* Autoneg Advertisement Register */
-#define MII_ADVERTISE			0x04
-#define ADVERTISE_SPEED_MASK		0x01E0
-#define ADVERTISE_DEFAULT_CAP		0x0DE0
+#define ADVERTISE_DEFAULT_CAP \
+	(ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)
 
 /* 1000BASE-T Control Register */
-#define MII_GIGA_CR			0x09
 #define GIGA_CR_1000T_REPEATER_DTE	0x0400  /* 1=Repeater/switch device port 0=DTE device */
 
 #define GIGA_CR_1000T_MS_VALUE		0x0800  /* 1=Configure PHY as Master 0=Configure PHY as Slave */