Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 637 insertions, 0 deletions

diff --git a/drivers/net/apne.c b/drivers/net/apne.c
new file mode 100644
index 000000000000..a94216b87184
--- /dev/null
+++ b/drivers/net/apne.c
@@ -0,0 +1,637 @@
+/*
+ * Amiga Linux/68k 8390 based PCMCIA Ethernet Driver for the Amiga 1200
+ *
+ * (C) Copyright 1997 Alain Malek
+ *                    (Alain.Malek@cryogen.com)
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is based on
+ *
+ * ne.c:       A general non-shared-memory NS8390 ethernet driver for linux
+ *             Written 1992-94 by Donald Becker.
+ *
+ * 8390.c:     A general NS8390 ethernet driver core for linux.
+ *             Written 1992-94 by Donald Becker.
+ *
+ * cnetdevice: A Sana-II ethernet driver for AmigaOS
+ *             Written by Bruce Abbott (bhabbott@inhb.co.nz)
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of the Linux
+ * distribution for more details.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/amigaints.h>
+#include <asm/amigahw.h>
+#include <asm/amigayle.h>
+#include <asm/amipcmcia.h>
+
+#include "8390.h"
+
+/* ---- No user-serviceable parts below ---- */
+
+#define DRV_NAME "apne"
+
+#define NE_BASE	 (dev->base_addr)
+#define NE_CMD	 		0x00
+#define NE_DATAPORT		0x10            /* NatSemi-defined port window offset. */
+#define NE_RESET		0x1f            /* Issue a read to reset, a write to clear. */
+#define NE_IO_EXTENT	        0x20
+
+#define NE_EN0_ISR		0x07
+#define NE_EN0_DCFG		0x0e
+
+#define NE_EN0_RSARLO	        0x08
+#define NE_EN0_RSARHI	        0x09
+#define NE_EN0_RCNTLO	        0x0a
+#define NE_EN0_RXCR		0x0c
+#define NE_EN0_TXCR		0x0d
+#define NE_EN0_RCNTHI	        0x0b
+#define NE_EN0_IMR		0x0f
+
+#define NE1SM_START_PG	0x20	/* First page of TX buffer */
+#define NE1SM_STOP_PG 	0x40	/* Last page +1 of RX ring */
+#define NESM_START_PG	0x40	/* First page of TX buffer */
+#define NESM_STOP_PG	0x80	/* Last page +1 of RX ring */
+
+
+struct net_device * __init apne_probe(int unit);
+static int apne_probe1(struct net_device *dev, int ioaddr);
+
+static int apne_open(struct net_device *dev);
+static int apne_close(struct net_device *dev);
+
+static void apne_reset_8390(struct net_device *dev);
+static void apne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+			  int ring_page);
+static void apne_block_input(struct net_device *dev, int count,
+								struct sk_buff *skb, int ring_offset);
+static void apne_block_output(struct net_device *dev, const int count,
+							const unsigned char *buf, const int start_page);
+static irqreturn_t apne_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+static int init_pcmcia(void);
+
+/* IO base address used for nic */
+
+#define IOBASE 0x300
+
+/*
+   use MANUAL_CONFIG and MANUAL_OFFSET for enabling IO by hand
+   you can find the values to use by looking at the cnet.device
+   config file example (the default values are for the CNET40BC card)
+*/
+
+/*
+#define MANUAL_CONFIG 0x20
+#define MANUAL_OFFSET 0x3f8
+
+#define MANUAL_HWADDR0 0x00
+#define MANUAL_HWADDR1 0x12
+#define MANUAL_HWADDR2 0x34
+#define MANUAL_HWADDR3 0x56
+#define MANUAL_HWADDR4 0x78
+#define MANUAL_HWADDR5 0x9a
+*/
+
+static const char version[] =
+    "apne.c:v1.1 7/10/98 Alain Malek (Alain.Malek@cryogen.ch)\n";
+
+static int apne_owned;	/* signal if card already owned */
+
+struct net_device * __init apne_probe(int unit)
+{
+	struct net_device *dev;
+#ifndef MANUAL_CONFIG
+	char tuple[8];
+#endif
+	int err;
+
+	if (apne_owned)
+		return ERR_PTR(-ENODEV);
+
+	if ( !(AMIGAHW_PRESENT(PCMCIA)) )
+		return ERR_PTR(-ENODEV);
+                                
+	printk("Looking for PCMCIA ethernet card : ");
+                                        
+	/* check if a card is inserted */
+	if (!(PCMCIA_INSERTED)) {
+		printk("NO PCMCIA card inserted\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	dev = alloc_ei_netdev();
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+	if (unit >= 0) {
+		sprintf(dev->name, "eth%d", unit);
+		netdev_boot_setup_check(dev);
+	}
+	SET_MODULE_OWNER(dev);
+
+	/* disable pcmcia irq for readtuple */
+	pcmcia_disable_irq();
+
+#ifndef MANUAL_CONFIG
+	if ((pcmcia_copy_tuple(CISTPL_FUNCID, tuple, 8) < 3) ||
+		(tuple[2] != CISTPL_FUNCID_NETWORK)) {
+		printk("not an ethernet card\n");
+		/* XXX: shouldn't we re-enable irq here? */
+		free_netdev(dev);
+		return ERR_PTR(-ENODEV);
+	}
+#endif
+
+	printk("ethernet PCMCIA card inserted\n");
+
+	if (!init_pcmcia()) {
+		/* XXX: shouldn't we re-enable irq here? */
+		free_netdev(dev);
+		return ERR_PTR(-ENODEV);
+	}
+
+	if (!request_region(IOBASE, 0x20, DRV_NAME)) {
+		free_netdev(dev);
+		return ERR_PTR(-EBUSY);
+	}
+
+	err = apne_probe1(dev, IOBASE);
+	if (err) {
+		release_region(IOBASE, 0x20);
+		free_netdev(dev);
+		return ERR_PTR(err);
+	}
+	err = register_netdev(dev);
+	if (!err)
+		return dev;
+
+	pcmcia_disable_irq();
+	free_irq(IRQ_AMIGA_PORTS, dev);
+	pcmcia_reset();
+	release_region(IOBASE, 0x20);
+	free_netdev(dev);
+	return ERR_PTR(err);
+}
+
+static int __init apne_probe1(struct net_device *dev, int ioaddr)
+{
+    int i;
+    unsigned char SA_prom[32];
+    int wordlength = 2;
+    const char *name = NULL;
+    int start_page, stop_page;
+#ifndef MANUAL_HWADDR0
+    int neX000, ctron;
+#endif
+    static unsigned version_printed;
+ 
+    if (ei_debug  &&  version_printed++ == 0)
+	printk(version);
+
+    printk("PCMCIA NE*000 ethercard probe");
+
+    /* Reset card. Who knows what dain-bramaged state it was left in. */
+    {	unsigned long reset_start_time = jiffies;
+
+	outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET);
+
+	while ((inb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
+		if (jiffies - reset_start_time > 2*HZ/100) {
+			printk(" not found (no reset ack).\n");
+			return -ENODEV;
+		}
+
+	outb(0xff, ioaddr + NE_EN0_ISR);		/* Ack all intr. */
+    }
+
+#ifndef MANUAL_HWADDR0
+
+    /* Read the 16 bytes of station address PROM.
+       We must first initialize registers, similar to NS8390_init(eifdev, 0).
+       We can't reliably read the SAPROM address without this.
+       (I learned the hard way!). */
+    {
+	struct {unsigned long value, offset; } program_seq[] = {
+	    {E8390_NODMA+E8390_PAGE0+E8390_STOP, NE_CMD}, /* Select page 0*/
+	    {0x48,	NE_EN0_DCFG},	/* Set byte-wide (0x48) access. */
+	    {0x00,	NE_EN0_RCNTLO},	/* Clear the count regs. */
+	    {0x00,	NE_EN0_RCNTHI},
+	    {0x00,	NE_EN0_IMR},	/* Mask completion irq. */
+	    {0xFF,	NE_EN0_ISR},
+	    {E8390_RXOFF, NE_EN0_RXCR},	/* 0x20  Set to monitor */
+	    {E8390_TXOFF, NE_EN0_TXCR},	/* 0x02  and loopback mode. */
+	    {32,	NE_EN0_RCNTLO},
+	    {0x00,	NE_EN0_RCNTHI},
+	    {0x00,	NE_EN0_RSARLO},	/* DMA starting at 0x0000. */
+	    {0x00,	NE_EN0_RSARHI},
+	    {E8390_RREAD+E8390_START, NE_CMD},
+	};
+	for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++) {
+	    outb(program_seq[i].value, ioaddr + program_seq[i].offset);
+	}
+
+    }
+    for(i = 0; i < 32 /*sizeof(SA_prom)*/; i+=2) {
+	SA_prom[i] = inb(ioaddr + NE_DATAPORT);
+	SA_prom[i+1] = inb(ioaddr + NE_DATAPORT);
+	if (SA_prom[i] != SA_prom[i+1])
+	    wordlength = 1;
+    }
+
+    /*	At this point, wordlength *only* tells us if the SA_prom is doubled
+	up or not because some broken PCI cards don't respect the byte-wide
+	request in program_seq above, and hence don't have doubled up values. 
+	These broken cards would otherwise be detected as an ne1000.  */
+
+    if (wordlength == 2)
+	for (i = 0; i < 16; i++)
+		SA_prom[i] = SA_prom[i+i];
+    
+    if (wordlength == 2) {
+	/* We must set the 8390 for word mode. */
+	outb(0x49, ioaddr + NE_EN0_DCFG);
+	start_page = NESM_START_PG;
+	stop_page = NESM_STOP_PG;
+    } else {
+	start_page = NE1SM_START_PG;
+	stop_page = NE1SM_STOP_PG;
+    }
+
+    neX000 = (SA_prom[14] == 0x57  &&  SA_prom[15] == 0x57);
+    ctron =  (SA_prom[0] == 0x00 && SA_prom[1] == 0x00 && SA_prom[2] == 0x1d);
+
+    /* Set up the rest of the parameters. */
+    if (neX000) {
+	name = (wordlength == 2) ? "NE2000" : "NE1000";
+    } else if (ctron) {
+	name = (wordlength == 2) ? "Ctron-8" : "Ctron-16";
+	start_page = 0x01;
+	stop_page = (wordlength == 2) ? 0x40 : 0x20;
+    } else {
+	printk(" not found.\n");
+	return -ENXIO;
+
+    }
+
+#else
+    wordlength = 2;
+    /* We must set the 8390 for word mode. */
+    outb(0x49, ioaddr + NE_EN0_DCFG);
+    start_page = NESM_START_PG;
+    stop_page = NESM_STOP_PG;
+
+    SA_prom[0] = MANUAL_HWADDR0;
+    SA_prom[1] = MANUAL_HWADDR1;
+    SA_prom[2] = MANUAL_HWADDR2;
+    SA_prom[3] = MANUAL_HWADDR3;
+    SA_prom[4] = MANUAL_HWADDR4;
+    SA_prom[5] = MANUAL_HWADDR5;
+    name = "NE2000";
+#endif
+
+    dev->base_addr = ioaddr;
+
+    /* Install the Interrupt handler */
+    i = request_irq(IRQ_AMIGA_PORTS, apne_interrupt, SA_SHIRQ, DRV_NAME, dev);
+    if (i) return i;
+
+    for(i = 0; i < ETHER_ADDR_LEN; i++) {
+	printk(" %2.2x", SA_prom[i]);
+	dev->dev_addr[i] = SA_prom[i];
+    }
+
+    printk("\n%s: %s found.\n", dev->name, name);
+
+    ei_status.name = name;
+    ei_status.tx_start_page = start_page;
+    ei_status.stop_page = stop_page;
+    ei_status.word16 = (wordlength == 2);
+
+    ei_status.rx_start_page = start_page + TX_PAGES;
+
+    ei_status.reset_8390 = &apne_reset_8390;
+    ei_status.block_input = &apne_block_input;
+    ei_status.block_output = &apne_block_output;
+    ei_status.get_8390_hdr = &apne_get_8390_hdr;
+    dev->open = &apne_open;
+    dev->stop = &apne_close;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+    dev->poll_controller = ei_poll;
+#endif
+    NS8390_init(dev, 0);
+
+    pcmcia_ack_int(pcmcia_get_intreq());		/* ack PCMCIA int req */
+    pcmcia_enable_irq();
+
+    apne_owned = 1;
+
+    return 0;
+}
+
+static int
+apne_open(struct net_device *dev)
+{
+    ei_open(dev);
+    return 0;
+}
+
+static int
+apne_close(struct net_device *dev)
+{
+    if (ei_debug > 1)
+	printk("%s: Shutting down ethercard.\n", dev->name);
+    ei_close(dev);
+    return 0;
+}
+
+/* Hard reset the card.  This used to pause for the same period that a
+   8390 reset command required, but that shouldn't be necessary. */
+static void
+apne_reset_8390(struct net_device *dev)
+{
+    unsigned long reset_start_time = jiffies;
+
+    init_pcmcia();
+
+    if (ei_debug > 1) printk("resetting the 8390 t=%ld...", jiffies);
+
+    outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
+
+    ei_status.txing = 0;
+    ei_status.dmaing = 0;
+
+    /* This check _should_not_ be necessary, omit eventually. */
+    while ((inb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
+	if (jiffies - reset_start_time > 2*HZ/100) {
+	    printk("%s: ne_reset_8390() did not complete.\n", dev->name);
+	    break;
+	}
+    outb(ENISR_RESET, NE_BASE + NE_EN0_ISR);	/* Ack intr. */
+}
+
+/* Grab the 8390 specific header. Similar to the block_input routine, but
+   we don't need to be concerned with ring wrap as the header will be at
+   the start of a page, so we optimize accordingly. */
+
+static void
+apne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+
+    int nic_base = dev->base_addr;
+    int cnt;
+    char *ptrc;
+    short *ptrs;
+
+    /* This *shouldn't* happen. If it does, it's the last thing you'll see */
+    if (ei_status.dmaing) {
+	printk("%s: DMAing conflict in ne_get_8390_hdr "
+	   "[DMAstat:%d][irqlock:%d][intr:%d].\n",
+	   dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq);
+	return;
+    }
+
+    ei_status.dmaing |= 0x01;
+    outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
+    outb(ENISR_RDC, nic_base + NE_EN0_ISR);
+    outb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO);
+    outb(0, nic_base + NE_EN0_RCNTHI);
+    outb(0, nic_base + NE_EN0_RSARLO);		/* On page boundary */
+    outb(ring_page, nic_base + NE_EN0_RSARHI);
+    outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
+
+    if (ei_status.word16) {
+        ptrs = (short*)hdr;
+        for(cnt = 0; cnt < (sizeof(struct e8390_pkt_hdr)>>1); cnt++)
+            *ptrs++ = inw(NE_BASE + NE_DATAPORT);
+    } else {
+        ptrc = (char*)hdr;
+        for(cnt = 0; cnt < sizeof(struct e8390_pkt_hdr); cnt++)
+            *ptrc++ = inb(NE_BASE + NE_DATAPORT);
+    }
+
+    outb(ENISR_RDC, nic_base + NE_EN0_ISR);	/* Ack intr. */
+    ei_status.dmaing &= ~0x01;
+
+    le16_to_cpus(&hdr->count);
+}
+
+/* Block input and output, similar to the Crynwr packet driver.  If you
+   are porting to a new ethercard, look at the packet driver source for hints.
+   The NEx000 doesn't share the on-board packet memory -- you have to put
+   the packet out through the "remote DMA" dataport using outb. */
+
+static void
+apne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+{
+    int nic_base = dev->base_addr;
+    char *buf = skb->data;
+    char *ptrc;
+    short *ptrs;
+    int cnt;
+
+    /* This *shouldn't* happen. If it does, it's the last thing you'll see */
+    if (ei_status.dmaing) {
+	printk("%s: DMAing conflict in ne_block_input "
+	   "[DMAstat:%d][irqlock:%d][intr:%d].\n",
+	   dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq);
+	return;
+    }
+    ei_status.dmaing |= 0x01;
+    outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
+    outb(ENISR_RDC, nic_base + NE_EN0_ISR);
+    outb(count & 0xff, nic_base + NE_EN0_RCNTLO);
+    outb(count >> 8, nic_base + NE_EN0_RCNTHI);
+    outb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO);
+    outb(ring_offset >> 8, nic_base + NE_EN0_RSARHI);
+    outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
+    if (ei_status.word16) {
+      ptrs = (short*)buf;
+      for (cnt = 0; cnt < (count>>1); cnt++)
+        *ptrs++ = inw(NE_BASE + NE_DATAPORT);
+      if (count & 0x01) {
+	buf[count-1] = inb(NE_BASE + NE_DATAPORT);
+      }
+    } else {
+      ptrc = (char*)buf;
+      for (cnt = 0; cnt < count; cnt++)
+        *ptrc++ = inb(NE_BASE + NE_DATAPORT);
+    }
+
+    outb(ENISR_RDC, nic_base + NE_EN0_ISR);	/* Ack intr. */
+    ei_status.dmaing &= ~0x01;
+}
+
+static void
+apne_block_output(struct net_device *dev, int count,
+		const unsigned char *buf, const int start_page)
+{
+    int nic_base = NE_BASE;
+    unsigned long dma_start;
+    char *ptrc;
+    short *ptrs;
+    int cnt;
+
+    /* Round the count up for word writes.  Do we need to do this?
+       What effect will an odd byte count have on the 8390?
+       I should check someday. */
+    if (ei_status.word16 && (count & 0x01))
+      count++;
+
+    /* This *shouldn't* happen. If it does, it's the last thing you'll see */
+    if (ei_status.dmaing) {
+	printk("%s: DMAing conflict in ne_block_output."
+	   "[DMAstat:%d][irqlock:%d][intr:%d]\n",
+	   dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq);
+	return;
+    }
+    ei_status.dmaing |= 0x01;
+    /* We should already be in page 0, but to be safe... */
+    outb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
+
+    outb(ENISR_RDC, nic_base + NE_EN0_ISR);
+
+   /* Now the normal output. */
+    outb(count & 0xff, nic_base + NE_EN0_RCNTLO);
+    outb(count >> 8,   nic_base + NE_EN0_RCNTHI);
+    outb(0x00, nic_base + NE_EN0_RSARLO);
+    outb(start_page, nic_base + NE_EN0_RSARHI);
+
+    outb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
+    if (ei_status.word16) {
+        ptrs = (short*)buf;
+        for (cnt = 0; cnt < count>>1; cnt++)
+            outw(*ptrs++, NE_BASE+NE_DATAPORT);
+    } else {
+        ptrc = (char*)buf;
+        for (cnt = 0; cnt < count; cnt++)
+	    outb(*ptrc++, NE_BASE + NE_DATAPORT);
+    }
+
+    dma_start = jiffies;
+
+    while ((inb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
+	if (jiffies - dma_start > 2*HZ/100) {		/* 20ms */
+		printk("%s: timeout waiting for Tx RDC.\n", dev->name);
+		apne_reset_8390(dev);
+		NS8390_init(dev,1);
+		break;
+	}
+
+    outb(ENISR_RDC, nic_base + NE_EN0_ISR);	/* Ack intr. */
+    ei_status.dmaing &= ~0x01;
+    return;
+}
+
+static irqreturn_t apne_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+    unsigned char pcmcia_intreq;
+
+    if (!(gayle.inten & GAYLE_IRQ_IRQ))
+        return IRQ_NONE;
+
+    pcmcia_intreq = pcmcia_get_intreq();
+
+    if (!(pcmcia_intreq & GAYLE_IRQ_IRQ)) {
+        pcmcia_ack_int(pcmcia_intreq);
+        return IRQ_NONE;
+    }
+    if (ei_debug > 3)
+        printk("pcmcia intreq = %x\n", pcmcia_intreq);
+    pcmcia_disable_irq();			/* to get rid of the sti() within ei_interrupt */
+    ei_interrupt(irq, dev_id, regs);
+    pcmcia_ack_int(pcmcia_get_intreq());
+    pcmcia_enable_irq();
+    return IRQ_HANDLED;
+}
+
+#ifdef MODULE
+static struct net_device *apne_dev;
+
+int init_module(void)
+{
+	apne_dev = apne_probe(-1);
+	if (IS_ERR(apne_dev))
+		return PTR_ERR(apne_dev);
+	return 0;
+}
+
+void cleanup_module(void)
+{
+	unregister_netdev(apne_dev);
+
+	pcmcia_disable_irq();
+
+	free_irq(IRQ_AMIGA_PORTS, apne_dev);
+
+	pcmcia_reset();
+
+	release_region(IOBASE, 0x20);
+
+	free_netdev(apne_dev);
+}
+
+#endif
+
+static int init_pcmcia(void)
+{
+	u_char config;
+#ifndef MANUAL_CONFIG
+	u_char tuple[32];
+	int offset_len;
+#endif
+	u_long offset;
+
+	pcmcia_reset();
+	pcmcia_program_voltage(PCMCIA_0V);
+	pcmcia_access_speed(PCMCIA_SPEED_250NS);
+	pcmcia_write_enable();
+
+#ifdef MANUAL_CONFIG
+	config = MANUAL_CONFIG;
+#else
+	/* get and write config byte to enable IO port */
+
+	if (pcmcia_copy_tuple(CISTPL_CFTABLE_ENTRY, tuple, 32) < 3)
+		return 0;
+
+	config = tuple[2] & 0x3f;
+#endif
+#ifdef MANUAL_OFFSET
+	offset = MANUAL_OFFSET;
+#else
+	if (pcmcia_copy_tuple(CISTPL_CONFIG, tuple, 32) < 6)
+		return 0;
+
+	offset_len = (tuple[2] & 0x3) + 1;
+	offset = 0;
+	while(offset_len--) {
+		offset = (offset << 8) | tuple[4+offset_len];
+	}
+#endif
+
+	out_8(GAYLE_ATTRIBUTE+offset, config);
+
+	return 1;
+}
+
+MODULE_LICENSE("GPL");