diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-08 20:39:20 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-08 20:39:20 +0300 |
commit | f4e70c2e5f1406e715f6359ae341e76e5004fb98 (patch) | |
tree | 79622d866d0cb8bdb494718e11d458770aee9713 /drivers/mtd/spi-nor/cadence-quadspi.c | |
parent | ea125dedbc14b305307889c40d74d564c4419851 (diff) | |
parent | b771327a4530e7ff05ae173d4903cd70357bb803 (diff) | |
download | linux-f4e70c2e5f1406e715f6359ae341e76e5004fb98.tar.xz |
Merge tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon:
"Core changes:
- Add a sysfs attribute to expose available OOB size
Driver changes:
- Remove HAS_DMA dependency on various drivers
- Use dev_get_drvdata() instead of platform_get_drvdata() in docg3
- Replace msleep by usleep_range() in the dataflash driver
- Avoid VLA usage in nftl layers
- Remove useless .owner assignment in pismo
- Fix various issues in the CFI driver
- Improve TRX partition handling expose a DT compat for this part
parser
- Clarify OFFSET_CONTINUOUS meaning
NAND core changes:
- Add Miquel as a NAND maintainer
- Add access mode to the nand_page_io_req struct
- Fix kernel-doc in rawnand.h
- Support bit-wise majority to recover from corrupted ONFI parameter
pages
- Stop checking FAIL bit after a SET_FEATURES, as documented in the
ONFI spec
Raw NAND Driver changes:
- Fix and cleanup the error path of many NAND controller drivers
- GPMI:
+ Cleanup/simplification of a few aspects in the driver
+ Take ECC setup specified in the DT into account
- sunxi: remove support for GPIO-based R/B polling
- MTK:
+ Use of_device_get_match_data() instead of of_match_device()
+ Add an entry in MAINTAINERS for this driver
+ Fix nand-ecc-step-size and nand-ecc-strength description in the
DT bindings doc
- fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page
OneNAND driver changes:
- samsung: use dev_get_drvdata() instead of platform_get_drvdata()
SPI NOR core changes:
- Add support for a bunch of SPI NOR chips
- Clear EAR reg when switching to 3-byte addressing mode on Winbond
chips
SPI NOR controller driver changes:
- cadence: Add DMA support for direct mode reads
- hisi: Prefix a few functions with hisi_
- intel:
+ Mark the driver as "dangerous" in Kconfig
+ Fix atomic sequence handling
+ Pass a 40us delay (instead of 0us) to readl_poll_timeout()
- fsl:
+ fix a typo in a function name
+ add support for IP variants embedded in the ls2080a and ls1080a
SoCs
- stm32: request exclusive control of the reset line"
* tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd: (66 commits)
mtd: nand: Pass mode information to nand_page_io_req
mtd: cfi_cmdset_0002: Change erase one block to enable XIP once
mtd: cfi_cmdset_0002: Change erase functions to check chip good only
mtd: cfi_cmdset_0002: Change erase functions to retry for error
mtd: cfi_cmdset_0002: Change definition naming to retry write operation
mtd: cfi_cmdset_0002: Change write buffer to check correct value
mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS
mtd: bcm47xxpart: add of_match_table with a new DT binding
dt-bindings: mtd: document Broadcom's BCM47xx partitions
mtd: spi-nor: Add support for EN25QH32
mtd: spi-nor: Add support for is25wp series chips
mtd: spi-nor: Add Winbond w25q32jv support
mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a
mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control
mtd: spi-nor: intel: provide a range for poll_timout
mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read
mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig
mtd: spi-nor: intel-spi: Fix atomic sequence handling
mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op
mtd: rawnand: use bit-wise majority to recover the ONFI param page
...
Diffstat (limited to 'drivers/mtd/spi-nor/cadence-quadspi.c')
-rw-r--r-- | drivers/mtd/spi-nor/cadence-quadspi.c | 96 |
1 files changed, 94 insertions, 2 deletions
diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index 5872f31eaa60..c3f7aaa5d18f 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -18,6 +18,8 @@ #include <linux/clk.h> #include <linux/completion.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> #include <linux/err.h> #include <linux/errno.h> #include <linux/interrupt.h> @@ -73,6 +75,10 @@ struct cqspi_st { struct completion transfer_complete; struct mutex bus_mutex; + struct dma_chan *rx_chan; + struct completion rx_dma_complete; + dma_addr_t mmap_phys_base; + int current_cs; int current_page_size; int current_erase_size; @@ -930,11 +936,75 @@ static ssize_t cqspi_write(struct spi_nor *nor, loff_t to, return len; } +static void cqspi_rx_dma_callback(void *param) +{ + struct cqspi_st *cqspi = param; + + complete(&cqspi->rx_dma_complete); +} + +static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf, + loff_t from, size_t len) +{ + struct cqspi_flash_pdata *f_pdata = nor->priv; + struct cqspi_st *cqspi = f_pdata->cqspi; + enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; + dma_addr_t dma_src = (dma_addr_t)cqspi->mmap_phys_base + from; + int ret = 0; + struct dma_async_tx_descriptor *tx; + dma_cookie_t cookie; + dma_addr_t dma_dst; + + if (!cqspi->rx_chan || !virt_addr_valid(buf)) { + memcpy_fromio(buf, cqspi->ahb_base + from, len); + return 0; + } + + dma_dst = dma_map_single(nor->dev, buf, len, DMA_DEV_TO_MEM); + if (dma_mapping_error(nor->dev, dma_dst)) { + dev_err(nor->dev, "dma mapping failed\n"); + return -ENOMEM; + } + tx = dmaengine_prep_dma_memcpy(cqspi->rx_chan, dma_dst, dma_src, + len, flags); + if (!tx) { + dev_err(nor->dev, "device_prep_dma_memcpy error\n"); + ret = -EIO; + goto err_unmap; + } + + tx->callback = cqspi_rx_dma_callback; + tx->callback_param = cqspi; + cookie = tx->tx_submit(tx); + reinit_completion(&cqspi->rx_dma_complete); + + ret = dma_submit_error(cookie); + if (ret) { + dev_err(nor->dev, "dma_submit_error %d\n", cookie); + ret = -EIO; + goto err_unmap; + } + + dma_async_issue_pending(cqspi->rx_chan); + ret = wait_for_completion_timeout(&cqspi->rx_dma_complete, + msecs_to_jiffies(len)); + if (ret <= 0) { + dmaengine_terminate_sync(cqspi->rx_chan); + dev_err(nor->dev, "DMA wait_for_completion_timeout\n"); + ret = -ETIMEDOUT; + goto err_unmap; + } + +err_unmap: + dma_unmap_single(nor->dev, dma_dst, len, DMA_DEV_TO_MEM); + + return 0; +} + static ssize_t cqspi_read(struct spi_nor *nor, loff_t from, size_t len, u_char *buf) { struct cqspi_flash_pdata *f_pdata = nor->priv; - struct cqspi_st *cqspi = f_pdata->cqspi; int ret; ret = cqspi_set_protocol(nor, 1); @@ -946,7 +1016,7 @@ static ssize_t cqspi_read(struct spi_nor *nor, loff_t from, return ret; if (f_pdata->use_direct_mode) - memcpy_fromio(buf, cqspi->ahb_base + from, len); + ret = cqspi_direct_read_execute(nor, buf, from, len); else ret = cqspi_indirect_read_execute(nor, buf, from, len); if (ret) @@ -1115,6 +1185,21 @@ static void cqspi_controller_init(struct cqspi_st *cqspi) cqspi_controller_enable(cqspi, 1); } +static void cqspi_request_mmap_dma(struct cqspi_st *cqspi) +{ + dma_cap_mask_t mask; + + dma_cap_zero(mask); + dma_cap_set(DMA_MEMCPY, mask); + + cqspi->rx_chan = dma_request_chan_by_mask(&mask); + if (IS_ERR(cqspi->rx_chan)) { + dev_err(&cqspi->pdev->dev, "No Rx DMA available\n"); + cqspi->rx_chan = NULL; + } + init_completion(&cqspi->rx_dma_complete); +} + static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) { const struct spi_nor_hwcaps hwcaps = { @@ -1192,6 +1277,9 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) f_pdata->use_direct_mode = true; dev_dbg(nor->dev, "using direct mode for %s\n", mtd->name); + + if (!cqspi->rx_chan) + cqspi_request_mmap_dma(cqspi); } } @@ -1252,6 +1340,7 @@ static int cqspi_probe(struct platform_device *pdev) dev_err(dev, "Cannot remap AHB address.\n"); return PTR_ERR(cqspi->ahb_base); } + cqspi->mmap_phys_base = (dma_addr_t)res_ahb->start; cqspi->ahb_size = resource_size(res_ahb); init_completion(&cqspi->transfer_complete); @@ -1322,6 +1411,9 @@ static int cqspi_remove(struct platform_device *pdev) cqspi_controller_enable(cqspi, 0); + if (cqspi->rx_chan) + dma_release_channel(cqspi->rx_chan); + clk_disable_unprepare(cqspi->clk); pm_runtime_put_sync(&pdev->dev); |