Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 406 insertions, 0 deletions

diff --git a/drivers/mtd/nand/tx4938ndfmc.c b/drivers/mtd/nand/tx4938ndfmc.c
new file mode 100644
index 000000000000..df26e58820b3
--- /dev/null
+++ b/drivers/mtd/nand/tx4938ndfmc.c
@@ -0,0 +1,406 @@
+/*
+ * drivers/mtd/nand/tx4938ndfmc.c
+ *
+ *  Overview:
+ *   This is a device driver for the NAND flash device connected to
+ *   TX4938 internal NAND Memory Controller.
+ *   TX4938 NDFMC is almost same as TX4925 NDFMC, but register size are 64 bit.
+ *
+ * Author: source@mvista.com
+ *
+ * Based on spia.c by Steven J. Hill
+ *
+ * $Id: tx4938ndfmc.c,v 1.4 2004/10/05 13:50:20 gleixner Exp $
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation 
+ *
+ * 2003 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/config.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <linux/delay.h>
+#include <asm/tx4938/rbtx4938.h>
+
+extern struct nand_oobinfo jffs2_oobinfo;
+
+/*
+ * MTD structure for TX4938 NDFMC
+ */
+static struct mtd_info *tx4938ndfmc_mtd;
+
+/*
+ * Define partitions for flash device
+ */
+#define flush_wb()	(void)tx4938_ndfmcptr->mcr;
+
+#define NUM_PARTITIONS  	3
+#define NUMBER_OF_CIS_BLOCKS	24
+#define SIZE_OF_BLOCK		0x00004000
+#define NUMBER_OF_BLOCK_PER_ZONE 1024
+#define SIZE_OF_ZONE		(NUMBER_OF_BLOCK_PER_ZONE * SIZE_OF_BLOCK)
+#ifndef CONFIG_MTD_CMDLINE_PARTS
+/*
+ * You can use the following sample of MTD partitions 
+ * on the NAND Flash Memory 32MB or more.
+ *
+ * The following figure shows the image of the sample partition on
+ * the 32MB NAND Flash Memory. 
+ *
+ *   Block No.
+ *    0 +-----------------------------+ ------
+ *      |             CIS             |   ^
+ *   24 +-----------------------------+   |
+ *      |         kernel image        |   | Zone 0
+ *      |                             |   |
+ *      +-----------------------------+   |
+ * 1023 |         unused area         |   v
+ *      +-----------------------------+ ------
+ * 1024 |            JFFS2            |   ^
+ *      |                             |   |
+ *      |                             |   | Zone 1
+ *      |                             |   |
+ *      |                             |   |
+ *      |                             |   v
+ * 2047 +-----------------------------+ ------
+ *
+ */
+static struct mtd_partition partition_info[NUM_PARTITIONS] = {
+	{
+		.name = "RBTX4938 CIS Area",
+ 		.offset =  0,
+ 		.size =    (NUMBER_OF_CIS_BLOCKS * SIZE_OF_BLOCK),
+ 		.mask_flags  = MTD_WRITEABLE	/* This partition is NOT writable */
+ 	},
+ 	{
+ 		.name = "RBTX4938 kernel image",
+ 		.offset =  MTDPART_OFS_APPEND,
+ 		.size =    8 * 0x00100000,	/* 8MB (Depends on size of kernel image) */
+ 		.mask_flags  = MTD_WRITEABLE	/* This partition is NOT writable */
+ 	},
+ 	{
+ 		.name = "Root FS (JFFS2)",
+ 		.offset =  (0 + SIZE_OF_ZONE),    /* start address of next zone */
+ 		.size =    MTDPART_SIZ_FULL
+ 	},
+};
+#endif
+
+static void tx4938ndfmc_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	switch (cmd) {
+		case NAND_CTL_SETCLE:
+			tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_CLE;
+			break;
+		case NAND_CTL_CLRCLE:
+			tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_CLE;
+			break;
+		case NAND_CTL_SETALE:
+			tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_ALE;
+			break;
+		case NAND_CTL_CLRALE:
+			tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_ALE;
+			break;
+		/* TX4938_NDFMCR_CE bit is 0:high 1:low */
+		case NAND_CTL_SETNCE:
+			tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_CE;
+			break;
+		case NAND_CTL_CLRNCE:
+			tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_CE;
+			break;
+		case NAND_CTL_SETWP:
+			tx4938_ndfmcptr->mcr |= TX4938_NDFMCR_WE;
+			break;
+		case NAND_CTL_CLRWP:
+			tx4938_ndfmcptr->mcr &= ~TX4938_NDFMCR_WE;
+			break;
+	}
+}
+static int tx4938ndfmc_dev_ready(struct mtd_info *mtd)
+{
+	flush_wb();
+	return !(tx4938_ndfmcptr->sr & TX4938_NDFSR_BUSY);
+}
+static void tx4938ndfmc_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+	u32 mcr = tx4938_ndfmcptr->mcr;
+	mcr &= ~TX4938_NDFMCR_ECC_ALL;
+	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF;
+	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_READ;
+	ecc_code[1] = tx4938_ndfmcptr->dtr;
+	ecc_code[0] = tx4938_ndfmcptr->dtr;
+	ecc_code[2] = tx4938_ndfmcptr->dtr;
+	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF;
+}
+static void tx4938ndfmc_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	u32 mcr = tx4938_ndfmcptr->mcr;
+	mcr &= ~TX4938_NDFMCR_ECC_ALL;
+	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_RESET;
+	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_OFF;
+	tx4938_ndfmcptr->mcr = mcr | TX4938_NDFMCR_ECC_ON;
+}
+
+static u_char tx4938ndfmc_nand_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *this = mtd->priv;
+	return tx4938_read_nfmc(this->IO_ADDR_R);
+}
+
+static void tx4938ndfmc_nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+	struct nand_chip *this = mtd->priv;
+	tx4938_write_nfmc(byte, this->IO_ADDR_W);
+}
+
+static void tx4938ndfmc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		tx4938_write_nfmc(buf[i], this->IO_ADDR_W);
+}
+
+static void tx4938ndfmc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		buf[i] = tx4938_read_nfmc(this->IO_ADDR_R);
+}
+
+static int tx4938ndfmc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *this = mtd->priv;
+
+	for (i=0; i<len; i++)
+		if (buf[i] != tx4938_read_nfmc(this->IO_ADDR_R))
+			return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Send command to NAND device
+ */
+static void tx4938ndfmc_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
+{
+	register struct nand_chip *this = mtd->priv;
+
+	/* Begin command latch cycle */
+	this->hwcontrol(mtd, NAND_CTL_SETCLE);
+	/*
+	 * Write out the command to the device.
+	 */
+	if (command == NAND_CMD_SEQIN) {
+		int readcmd;
+
+		if (column >= mtd->oobblock) {
+			/* OOB area */
+			column -= mtd->oobblock;
+			readcmd = NAND_CMD_READOOB;
+		} else if (column < 256) {
+			/* First 256 bytes --> READ0 */
+			readcmd = NAND_CMD_READ0;
+		} else {
+			column -= 256;
+			readcmd = NAND_CMD_READ1;
+		}
+		this->write_byte(mtd, readcmd);
+	}
+	this->write_byte(mtd, command);
+
+	/* Set ALE and clear CLE to start address cycle */
+	this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+
+	if (column != -1 || page_addr != -1) {
+		this->hwcontrol(mtd, NAND_CTL_SETALE);
+
+		/* Serially input address */
+		if (column != -1)
+			this->write_byte(mtd, column);
+		if (page_addr != -1) {
+			this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
+			this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
+			/* One more address cycle for higher density devices */
+			if (mtd->size & 0x0c000000) 
+				this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f));
+		}
+		/* Latch in address */
+		this->hwcontrol(mtd, NAND_CTL_CLRALE);
+	}
+	
+	/* 
+	 * program and erase have their own busy handlers 
+	 * status and sequential in needs no delay
+	*/
+	switch (command) {
+			
+	case NAND_CMD_PAGEPROG:
+		/* Turn off WE */
+		this->hwcontrol (mtd, NAND_CTL_CLRWP);
+                return;
+
+	case NAND_CMD_SEQIN:
+		/* Turn on WE */
+		this->hwcontrol (mtd, NAND_CTL_SETWP);
+                return;
+
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_STATUS:
+		return;
+
+	case NAND_CMD_RESET:
+		if (this->dev_ready)	
+			break;
+		this->hwcontrol(mtd, NAND_CTL_SETCLE);
+		this->write_byte(mtd, NAND_CMD_STATUS);
+		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+		while ( !(this->read_byte(mtd) & 0x40));
+		return;
+
+	/* This applies to read commands */	
+	default:
+		/* 
+		 * If we don't have access to the busy pin, we apply the given
+		 * command delay
+		*/
+		if (!this->dev_ready) {
+			udelay (this->chip_delay);
+			return;
+		}	
+	}
+	
+	/* wait until command is processed */
+	while (!this->dev_ready(mtd));
+}
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, char *);
+#endif
+/*
+ * Main initialization routine
+ */
+int __init tx4938ndfmc_init (void)
+{
+	struct nand_chip *this;
+	int bsprt = 0, hold = 0xf, spw = 0xf;
+	int protected = 0;
+
+	if ((*rbtx4938_piosel_ptr & 0x0c) != 0x08) {
+		printk("TX4938 NDFMC: disabled by IOC PIOSEL\n");
+		return -ENODEV;
+	}
+	bsprt = 1;
+	hold = 2;
+	spw = 9 - 1;	/* 8 GBUSCLK = 80ns (@ GBUSCLK 100MHz) */
+
+	if ((tx4938_ccfgptr->pcfg &
+	     (TX4938_PCFG_ATA_SEL|TX4938_PCFG_ISA_SEL|TX4938_PCFG_NDF_SEL))
+	    != TX4938_PCFG_NDF_SEL) {
+		printk("TX4938 NDFMC: disabled by PCFG.\n");
+		return -ENODEV;
+	}
+
+	/* reset NDFMC */
+	tx4938_ndfmcptr->rstr |= TX4938_NDFRSTR_RST;
+	while (tx4938_ndfmcptr->rstr & TX4938_NDFRSTR_RST)
+		;
+	/* setup BusSeparete, Hold Time, Strobe Pulse Width */
+	tx4938_ndfmcptr->mcr = bsprt ? TX4938_NDFMCR_BSPRT : 0;
+	tx4938_ndfmcptr->spr = hold << 4 | spw;
+
+	/* Allocate memory for MTD device structure and private data */
+	tx4938ndfmc_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
+				      GFP_KERNEL);
+	if (!tx4938ndfmc_mtd) {
+		printk ("Unable to allocate TX4938 NDFMC MTD device structure.\n");
+		return -ENOMEM;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&tx4938ndfmc_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) tx4938ndfmc_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	tx4938ndfmc_mtd->priv = this;
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = (unsigned long)&tx4938_ndfmcptr->dtr;
+	this->IO_ADDR_W = (unsigned long)&tx4938_ndfmcptr->dtr;
+	this->hwcontrol = tx4938ndfmc_hwcontrol;
+	this->dev_ready = tx4938ndfmc_dev_ready;
+	this->calculate_ecc = tx4938ndfmc_calculate_ecc;
+	this->correct_data = nand_correct_data;
+	this->enable_hwecc = tx4938ndfmc_enable_hwecc;
+	this->eccmode = NAND_ECC_HW3_256;
+	this->chip_delay = 100;
+	this->read_byte = tx4938ndfmc_nand_read_byte;
+	this->write_byte = tx4938ndfmc_nand_write_byte;
+	this->cmdfunc = tx4938ndfmc_nand_command;
+	this->write_buf = tx4938ndfmc_nand_write_buf;
+	this->read_buf = tx4938ndfmc_nand_read_buf;
+	this->verify_buf = tx4938ndfmc_nand_verify_buf;
+
+	/* Scan to find existance of the device */
+	if (nand_scan (tx4938ndfmc_mtd, 1)) {
+		kfree (tx4938ndfmc_mtd);
+		return -ENXIO;
+	}
+
+	if (protected) {
+		printk(KERN_INFO "TX4938 NDFMC: write protected.\n");
+		tx4938ndfmc_mtd->flags &= ~(MTD_WRITEABLE | MTD_ERASEABLE);
+	}
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	{
+		int mtd_parts_nb = 0;
+		struct mtd_partition *mtd_parts = 0;
+		mtd_parts_nb = parse_cmdline_partitions(tx4938ndfmc_mtd, &mtd_parts, "tx4938ndfmc");
+		if (mtd_parts_nb > 0)
+			add_mtd_partitions(tx4938ndfmc_mtd, mtd_parts, mtd_parts_nb);
+		else
+			add_mtd_device(tx4938ndfmc_mtd);
+	}
+#else
+	add_mtd_partitions(tx4938ndfmc_mtd, partition_info, NUM_PARTITIONS );
+#endif
+
+	return 0;
+}
+module_init(tx4938ndfmc_init);
+
+/*
+ * Clean up routine
+ */
+static void __exit tx4938ndfmc_cleanup (void)
+{
+	/* Release resources, unregister device */
+	nand_release (tx4938ndfmc_mtd);
+
+	/* Free the MTD device structure */
+	kfree (tx4938ndfmc_mtd);
+}
+module_exit(tx4938ndfmc_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
+MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on TX4938 NDFMC");