mtd: nand: provide valid ->data_interface during NAND detection

Right now, the chip->data_interface field is populated in
nand_scan_tail(), so after the whole NAND detection has taken place.
This is fine because these timings are not yet used by the core so
early in the probe process, but the situation is about to change with
the introduction of ->exec_op().

Also, by convention, nand_scan_ident() is not supposed to allocate
resources, only nand_scan_tail() can, so this prevent us from
allocating and initializing the data_interface object in
nand_scan_ident().

In order to solve this problem, directly embed a data_interface object
in nand_chip so that we don't have to allocate it, and initialize it to
ONFI SDR mode 0 at the very beginning of nand_scan_ident().

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

1 files changed, 20 insertions, 26 deletions

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index e3bf33bc1fb6..215c52a3b9ad 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -816,8 +816,8 @@ static void nand_ccs_delay(struct nand_chip *chip)
 	 * Wait tCCS_min if it is correctly defined, otherwise wait 500ns
 	 * (which should be safe for all NANDs).
 	 */
-	if (chip->data_interface && chip->data_interface->timings.sdr.tCCS_min)
-		ndelay(chip->data_interface->timings.sdr.tCCS_min / 1000);
+	if (chip->setup_data_interface)
+		ndelay(chip->data_interface.timings.sdr.tCCS_min / 1000);
 	else
 		ndelay(500);
 }
@@ -1112,7 +1112,6 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
 static int nand_reset_data_interface(struct nand_chip *chip, int chipnr)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	const struct nand_data_interface *conf;
 	int ret;
 
 	if (!chip->setup_data_interface)
@@ -1132,8 +1131,8 @@ static int nand_reset_data_interface(struct nand_chip *chip, int chipnr)
 	 * timings to timing mode 0.
 	 */
 
-	conf = nand_get_default_data_interface();
-	ret = chip->setup_data_interface(mtd, chipnr, conf);
+	onfi_fill_data_interface(chip, NAND_SDR_IFACE, 0);
+	ret = chip->setup_data_interface(mtd, chipnr, &chip->data_interface);
 	if (ret)
 		pr_err("Failed to configure data interface to SDR timing mode 0\n");
 
@@ -1158,7 +1157,7 @@ static int nand_setup_data_interface(struct nand_chip *chip, int chipnr)
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	int ret;
 
-	if (!chip->setup_data_interface || !chip->data_interface)
+	if (!chip->setup_data_interface)
 		return 0;
 
 	/*
@@ -1179,7 +1178,7 @@ static int nand_setup_data_interface(struct nand_chip *chip, int chipnr)
 			goto err;
 	}
 
-	ret = chip->setup_data_interface(mtd, chipnr, chip->data_interface);
+	ret = chip->setup_data_interface(mtd, chipnr, &chip->data_interface);
 err:
 	return ret;
 }
@@ -1219,21 +1218,16 @@ static int nand_init_data_interface(struct nand_chip *chip)
 		modes = GENMASK(chip->onfi_timing_mode_default, 0);
 	}
 
-	chip->data_interface = kzalloc(sizeof(*chip->data_interface),
-				       GFP_KERNEL);
-	if (!chip->data_interface)
-		return -ENOMEM;
 
 	for (mode = fls(modes) - 1; mode >= 0; mode--) {
-		ret = onfi_init_data_interface(chip, chip->data_interface,
-					       NAND_SDR_IFACE, mode);
+		ret = onfi_fill_data_interface(chip, NAND_SDR_IFACE, mode);
 		if (ret)
 			continue;
 
 		/* Pass -1 to only */
 		ret = chip->setup_data_interface(mtd,
 						 NAND_DATA_IFACE_CHECK_ONLY,
-						 chip->data_interface);
+						 &chip->data_interface);
 		if (!ret) {
 			chip->onfi_timing_mode_default = mode;
 			break;
@@ -1243,11 +1237,6 @@ static int nand_init_data_interface(struct nand_chip *chip)
 	return 0;
 }
 
-static void nand_release_data_interface(struct nand_chip *chip)
-{
-	kfree(chip->data_interface);
-}
-
 /**
  * nand_read_page_op - Do a READ PAGE operation
  * @chip: The NAND chip
@@ -1763,11 +1752,16 @@ EXPORT_SYMBOL_GPL(nand_write_data_op);
  * @chip: The NAND chip
  * @chipnr: Internal die id
  *
- * Returns 0 for success or negative error code otherwise
+ * Save the timings data structure, then apply SDR timings mode 0 (see
+ * nand_reset_data_interface for details), do the reset operation, and
+ * apply back the previous timings.
+ *
+ * Returns 0 on success, a negative error code otherwise.
  */
 int nand_reset(struct nand_chip *chip, int chipnr)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_data_interface saved_data_intf = chip->data_interface;
 	int ret;
 
 	ret = nand_reset_data_interface(chip, chipnr);
@@ -1785,6 +1779,7 @@ int nand_reset(struct nand_chip *chip, int chipnr)
 		return ret;
 
 	chip->select_chip(mtd, chipnr);
+	chip->data_interface = saved_data_intf;
 	ret = nand_setup_data_interface(chip, chipnr);
 	chip->select_chip(mtd, -1);
 	if (ret)
@@ -4889,6 +4884,9 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	int ret;
 
+	/* Enforce the right timings for reset/detection */
+	onfi_fill_data_interface(chip, NAND_SDR_IFACE, 0);
+
 	ret = nand_dt_init(chip);
 	if (ret)
 		return ret;
@@ -5629,7 +5627,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 		chip->select_chip(mtd, -1);
 
 		if (ret)
-			goto err_nand_data_iface_cleanup;
+			goto err_nand_manuf_cleanup;
 	}
 
 	/* Check, if we should skip the bad block table scan */
@@ -5639,12 +5637,10 @@ int nand_scan_tail(struct mtd_info *mtd)
 	/* Build bad block table */
 	ret = chip->scan_bbt(mtd);
 	if (ret)
-		goto err_nand_data_iface_cleanup;
+		goto err_nand_manuf_cleanup;
 
 	return 0;
 
-err_nand_data_iface_cleanup:
-	nand_release_data_interface(chip);
 
 err_nand_manuf_cleanup:
 	nand_manufacturer_cleanup(chip);
@@ -5703,8 +5699,6 @@ void nand_cleanup(struct nand_chip *chip)
 	    chip->ecc.algo == NAND_ECC_BCH)
 		nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
 
-	nand_release_data_interface(chip);
-
 	/* Free bad block table memory */
 	kfree(chip->bbt);
 	if (!(chip->options & NAND_OWN_BUFFERS) && chip->buffers) {