mxc_nand: make some internally used functions overwriteable

This patch prepares the driver to add v3 controller support
later. The v3 controller is basically the same controller as v1
and v2, but with a completely different register layout.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 44 insertions, 28 deletions

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index b6aa7e3a967a..5130a8531024 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -115,6 +115,13 @@ struct mxc_nand_host {
 	uint8_t			*data_buf;
 	unsigned int		buf_start;
 	int			spare_len;
+
+	void			(*preset)(struct mtd_info *);
+	void			(*send_cmd)(struct mxc_nand_host *, uint16_t, int);
+	void			(*send_addr)(struct mxc_nand_host *, uint16_t, int);
+	void			(*send_page)(struct mtd_info *, unsigned int);
+	void			(*send_read_id)(struct mxc_nand_host *);
+	uint16_t		(*get_dev_status)(struct mxc_nand_host *);
 };
 
 /* OOB placement block for use with hardware ecc generation */
@@ -212,7 +219,7 @@ static void wait_op_done(struct mxc_nand_host *host, int useirq)
 
 /* This function issues the specified command to the NAND device and
  * waits for completion. */
-static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
 {
 	DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
 
@@ -241,7 +248,7 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
 /* This function sends an address (or partial address) to the
  * NAND device. The address is used to select the source/destination for
  * a NAND command. */
-static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast)
+static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
 {
 	DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
 
@@ -252,7 +259,7 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast)
 	wait_op_done(host, islast);
 }
 
-static void send_page(struct mtd_info *mtd, unsigned int ops)
+static void send_page_v1_v2(struct mtd_info *mtd, unsigned int ops)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
@@ -276,7 +283,7 @@ static void send_page(struct mtd_info *mtd, unsigned int ops)
 }
 
 /* Request the NANDFC to perform a read of the NAND device ID. */
-static void send_read_id(struct mxc_nand_host *host)
+static void send_read_id_v1_v2(struct mxc_nand_host *host)
 {
 	struct nand_chip *this = &host->nand;
 
@@ -302,7 +309,7 @@ static void send_read_id(struct mxc_nand_host *host)
 
 /* This function requests the NANDFC to perform a read of the
  * NAND device status and returns the current status. */
-static uint16_t get_dev_status(struct mxc_nand_host *host)
+static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host)
 {
 	void __iomem *main_buf = host->main_area0;
 	uint32_t store;
@@ -381,7 +388,7 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
 
 	/* Check for status request */
 	if (host->status_request)
-		return get_dev_status(host) & 0xFF;
+		return host->get_dev_status(host) & 0xFF;
 
 	ret = *(uint8_t *)(host->data_buf + host->buf_start);
 	host->buf_start++;
@@ -517,39 +524,39 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
 		 * we will used the saved column address to index into
 		 * the full page.
 		 */
-		send_addr(host, 0, page_addr == -1);
+		host->send_addr(host, 0, page_addr == -1);
 		if (mtd->writesize > 512)
 			/* another col addr cycle for 2k page */
-			send_addr(host, 0, false);
+			host->send_addr(host, 0, false);
 	}
 
 	/* Write out page address, if necessary */
 	if (page_addr != -1) {
 		/* paddr_0 - p_addr_7 */
-		send_addr(host, (page_addr & 0xff), false);
+		host->send_addr(host, (page_addr & 0xff), false);
 
 		if (mtd->writesize > 512) {
 			if (mtd->size >= 0x10000000) {
 				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff, false);
-				send_addr(host, (page_addr >> 16) & 0xff, true);
+				host->send_addr(host, (page_addr >> 8) & 0xff, false);
+				host->send_addr(host, (page_addr >> 16) & 0xff, true);
 			} else
 				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff, true);
+				host->send_addr(host, (page_addr >> 8) & 0xff, true);
 		} else {
 			/* One more address cycle for higher density devices */
 			if (mtd->size >= 0x4000000) {
 				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff, false);
-				send_addr(host, (page_addr >> 16) & 0xff, true);
+				host->send_addr(host, (page_addr >> 8) & 0xff, false);
+				host->send_addr(host, (page_addr >> 16) & 0xff, true);
 			} else
 				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff, true);
+				host->send_addr(host, (page_addr >> 8) & 0xff, true);
 		}
 	}
 }
 
-static void preset(struct mtd_info *mtd)
+static void preset_v1_v2(struct mtd_info *mtd)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
@@ -602,15 +609,15 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 	/* Command pre-processing step */
 	switch (command) {
 	case NAND_CMD_RESET:
-		preset(mtd);
-		send_cmd(host, command, false);
+		host->preset(mtd);
+		host->send_cmd(host, command, false);
 		break;
 
 	case NAND_CMD_STATUS:
 		host->buf_start = 0;
 		host->status_request = true;
 
-		send_cmd(host, command, true);
+		host->send_cmd(host, command, true);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
@@ -623,13 +630,13 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 
 		command = NAND_CMD_READ0; /* only READ0 is valid */
 
-		send_cmd(host, command, false);
+		host->send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 
 		if (mtd->writesize > 512)
-			send_cmd(host, NAND_CMD_READSTART, true);
+			host->send_cmd(host, NAND_CMD_READSTART, true);
 
-		send_page(mtd, NFC_OUTPUT);
+		host->send_page(mtd, NFC_OUTPUT);
 
 		memcpy(host->data_buf, host->main_area0, mtd->writesize);
 		copy_spare(mtd, true);
@@ -642,28 +649,28 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 
 		host->buf_start = column;
 
-		send_cmd(host, command, false);
+		host->send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
 	case NAND_CMD_PAGEPROG:
 		memcpy(host->main_area0, host->data_buf, mtd->writesize);
 		copy_spare(mtd, false);
-		send_page(mtd, NFC_INPUT);
-		send_cmd(host, command, true);
+		host->send_page(mtd, NFC_INPUT);
+		host->send_cmd(host, command, true);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
 	case NAND_CMD_READID:
-		send_cmd(host, command, true);
+		host->send_cmd(host, command, true);
 		mxc_do_addr_cycle(mtd, column, page_addr);
-		send_read_id(host);
+		host->send_read_id(host);
 		host->buf_start = column;
 		break;
 
 	case NAND_CMD_ERASE1:
 	case NAND_CMD_ERASE2:
-		send_cmd(host, command, false);
+		host->send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 
 		break;
@@ -760,6 +767,15 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 
 	host->main_area0 = host->base;
 
+	if (nfc_is_v1() || nfc_is_v21()) {
+		host->preset = preset_v1_v2;
+		host->send_cmd = send_cmd_v1_v2;
+		host->send_addr = send_addr_v1_v2;
+		host->send_page = send_page_v1_v2;
+		host->send_read_id = send_read_id_v1_v2;
+		host->get_dev_status = get_dev_status_v1_v2;
+	}
+
 	if (nfc_is_v21()) {
 		host->regs = host->base + 0x1e00;
 		host->spare0 = host->base + 0x1000;