mtd: nand: move raw NAND related code to the raw/ subdir

As part of the process of sharing more code between different NAND
based devices, we need to move all raw NAND related code to the raw/
subdirectory.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

1 files changed, 0 insertions, 315 deletions

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
deleted file mode 100644
index 06c1f993912c..000000000000
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * Freescale GPMI NAND Flash Driver
- *
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
- * Copyright (C) 2008 Embedded Alley Solutions, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
-#define __DRIVERS_MTD_NAND_GPMI_NAND_H
-
-#include <linux/mtd/rawnand.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-
-#define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
-struct resources {
-	void __iomem  *gpmi_regs;
-	void __iomem  *bch_regs;
-	unsigned int  dma_low_channel;
-	unsigned int  dma_high_channel;
-	struct clk    *clock[GPMI_CLK_MAX];
-};
-
-/**
- * struct bch_geometry - BCH geometry description.
- * @gf_len:                   The length of Galois Field. (e.g., 13 or 14)
- * @ecc_strength:             A number that describes the strength of the ECC
- *                            algorithm.
- * @page_size:                The size, in bytes, of a physical page, including
- *                            both data and OOB.
- * @metadata_size:            The size, in bytes, of the metadata.
- * @ecc_chunk_size:           The size, in bytes, of a single ECC chunk. Note
- *                            the first chunk in the page includes both data and
- *                            metadata, so it's a bit larger than this value.
- * @ecc_chunk_count:          The number of ECC chunks in the page,
- * @payload_size:             The size, in bytes, of the payload buffer.
- * @auxiliary_size:           The size, in bytes, of the auxiliary buffer.
- * @auxiliary_status_offset:  The offset into the auxiliary buffer at which
- *                            the ECC status appears.
- * @block_mark_byte_offset:   The byte offset in the ECC-based page view at
- *                            which the underlying physical block mark appears.
- * @block_mark_bit_offset:    The bit offset into the ECC-based page view at
- *                            which the underlying physical block mark appears.
- */
-struct bch_geometry {
-	unsigned int  gf_len;
-	unsigned int  ecc_strength;
-	unsigned int  page_size;
-	unsigned int  metadata_size;
-	unsigned int  ecc_chunk_size;
-	unsigned int  ecc_chunk_count;
-	unsigned int  payload_size;
-	unsigned int  auxiliary_size;
-	unsigned int  auxiliary_status_offset;
-	unsigned int  block_mark_byte_offset;
-	unsigned int  block_mark_bit_offset;
-};
-
-/**
- * struct boot_rom_geometry - Boot ROM geometry description.
- * @stride_size_in_pages:        The size of a boot block stride, in pages.
- * @search_area_stride_exponent: The logarithm to base 2 of the size of a
- *                               search area in boot block strides.
- */
-struct boot_rom_geometry {
-	unsigned int  stride_size_in_pages;
-	unsigned int  search_area_stride_exponent;
-};
-
-/* DMA operations types */
-enum dma_ops_type {
-	DMA_FOR_COMMAND = 1,
-	DMA_FOR_READ_DATA,
-	DMA_FOR_WRITE_DATA,
-	DMA_FOR_READ_ECC_PAGE,
-	DMA_FOR_WRITE_ECC_PAGE
-};
-
-/**
- * struct nand_timing - Fundamental timing attributes for NAND.
- * @data_setup_in_ns:         The data setup time, in nanoseconds. Usually the
- *                            maximum of tDS and tWP. A negative value
- *                            indicates this characteristic isn't known.
- * @data_hold_in_ns:          The data hold time, in nanoseconds. Usually the
- *                            maximum of tDH, tWH and tREH. A negative value
- *                            indicates this characteristic isn't known.
- * @address_setup_in_ns:      The address setup time, in nanoseconds. Usually
- *                            the maximum of tCLS, tCS and tALS. A negative
- *                            value indicates this characteristic isn't known.
- * @gpmi_sample_delay_in_ns:  A GPMI-specific timing parameter. A negative value
- *                            indicates this characteristic isn't known.
- * @tREA_in_ns:               tREA, in nanoseconds, from the data sheet. A
- *                            negative value indicates this characteristic isn't
- *                            known.
- * @tRLOH_in_ns:              tRLOH, in nanoseconds, from the data sheet. A
- *                            negative value indicates this characteristic isn't
- *                            known.
- * @tRHOH_in_ns:              tRHOH, in nanoseconds, from the data sheet. A
- *                            negative value indicates this characteristic isn't
- *                            known.
- */
-struct nand_timing {
-	int8_t  data_setup_in_ns;
-	int8_t  data_hold_in_ns;
-	int8_t  address_setup_in_ns;
-	int8_t  gpmi_sample_delay_in_ns;
-	int8_t  tREA_in_ns;
-	int8_t  tRLOH_in_ns;
-	int8_t  tRHOH_in_ns;
-};
-
-enum gpmi_type {
-	IS_MX23,
-	IS_MX28,
-	IS_MX6Q,
-	IS_MX6SX,
-	IS_MX7D,
-};
-
-struct gpmi_devdata {
-	enum gpmi_type type;
-	int bch_max_ecc_strength;
-	int max_chain_delay; /* See the async EDO mode */
-	const char * const *clks;
-	const int clks_count;
-};
-
-struct gpmi_nand_data {
-	/* flags */
-#define GPMI_ASYNC_EDO_ENABLED	(1 << 0)
-#define GPMI_TIMING_INIT_OK	(1 << 1)
-	int			flags;
-	const struct gpmi_devdata *devdata;
-
-	/* System Interface */
-	struct device		*dev;
-	struct platform_device	*pdev;
-
-	/* Resources */
-	struct resources	resources;
-
-	/* Flash Hardware */
-	struct nand_timing	timing;
-	int			timing_mode;
-
-	/* BCH */
-	struct bch_geometry	bch_geometry;
-	struct completion	bch_done;
-
-	/* NAND Boot issue */
-	bool			swap_block_mark;
-	struct boot_rom_geometry rom_geometry;
-
-	/* MTD / NAND */
-	struct nand_chip	nand;
-
-	/* General-use Variables */
-	int			current_chip;
-	unsigned int		command_length;
-
-	/* passed from upper layer */
-	uint8_t			*upper_buf;
-	int			upper_len;
-
-	/* for DMA operations */
-	bool			direct_dma_map_ok;
-
-	struct scatterlist	cmd_sgl;
-	char			*cmd_buffer;
-
-	struct scatterlist	data_sgl;
-	char			*data_buffer_dma;
-
-	void			*page_buffer_virt;
-	dma_addr_t		page_buffer_phys;
-	unsigned int		page_buffer_size;
-
-	void			*payload_virt;
-	dma_addr_t		payload_phys;
-
-	void			*auxiliary_virt;
-	dma_addr_t		auxiliary_phys;
-
-	void			*raw_buffer;
-
-	/* DMA channels */
-#define DMA_CHANS		8
-	struct dma_chan		*dma_chans[DMA_CHANS];
-	enum dma_ops_type	last_dma_type;
-	enum dma_ops_type	dma_type;
-	struct completion	dma_done;
-
-	/* private */
-	void			*private;
-};
-
-/**
- * struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
- * @data_setup_in_cycles:      The data setup time, in cycles.
- * @data_hold_in_cycles:       The data hold time, in cycles.
- * @address_setup_in_cycles:   The address setup time, in cycles.
- * @device_busy_timeout:       The timeout waiting for NAND Ready/Busy,
- *                             this value is the number of cycles multiplied
- *                             by 4096.
- * @use_half_periods:          Indicates the clock is running slowly, so the
- *                             NFC DLL should use half-periods.
- * @sample_delay_factor:       The sample delay factor.
- * @wrn_dly_sel:               The delay on the GPMI write strobe.
- */
-struct gpmi_nfc_hardware_timing {
-	/* for HW_GPMI_TIMING0 */
-	uint8_t  data_setup_in_cycles;
-	uint8_t  data_hold_in_cycles;
-	uint8_t  address_setup_in_cycles;
-
-	/* for HW_GPMI_TIMING1 */
-	uint16_t device_busy_timeout;
-#define GPMI_DEFAULT_BUSY_TIMEOUT	0x500 /* default busy timeout value.*/
-
-	/* for HW_GPMI_CTRL1 */
-	bool     use_half_periods;
-	uint8_t  sample_delay_factor;
-	uint8_t  wrn_dly_sel;
-};
-
-/**
- * struct timing_threshold - Timing threshold
- * @max_data_setup_cycles:       The maximum number of data setup cycles that
- *                               can be expressed in the hardware.
- * @internal_data_setup_in_ns:   The time, in ns, that the NFC hardware requires
- *                               for data read internal setup. In the Reference
- *                               Manual, see the chapter "High-Speed NAND
- *                               Timing" for more details.
- * @max_sample_delay_factor:     The maximum sample delay factor that can be
- *                               expressed in the hardware.
- * @max_dll_clock_period_in_ns:  The maximum period of the GPMI clock that the
- *                               sample delay DLL hardware can possibly work
- *                               with (the DLL is unusable with longer periods).
- *                               If the full-cycle period is greater than HALF
- *                               this value, the DLL must be configured to use
- *                               half-periods.
- * @max_dll_delay_in_ns:         The maximum amount of delay, in ns, that the
- *                               DLL can implement.
- * @clock_frequency_in_hz:       The clock frequency, in Hz, during the current
- *                               I/O transaction. If no I/O transaction is in
- *                               progress, this is the clock frequency during
- *                               the most recent I/O transaction.
- */
-struct timing_threshold {
-	const unsigned int      max_chip_count;
-	const unsigned int      max_data_setup_cycles;
-	const unsigned int      internal_data_setup_in_ns;
-	const unsigned int      max_sample_delay_factor;
-	const unsigned int      max_dll_clock_period_in_ns;
-	const unsigned int      max_dll_delay_in_ns;
-	unsigned long           clock_frequency_in_hz;
-
-};
-
-/* Common Services */
-int common_nfc_set_geometry(struct gpmi_nand_data *);
-struct dma_chan *get_dma_chan(struct gpmi_nand_data *);
-void prepare_data_dma(struct gpmi_nand_data *,
-		      enum dma_data_direction dr);
-int start_dma_without_bch_irq(struct gpmi_nand_data *,
-			      struct dma_async_tx_descriptor *);
-int start_dma_with_bch_irq(struct gpmi_nand_data *,
-			   struct dma_async_tx_descriptor *);
-
-/* GPMI-NAND helper function library */
-int gpmi_init(struct gpmi_nand_data *);
-int gpmi_extra_init(struct gpmi_nand_data *);
-void gpmi_clear_bch(struct gpmi_nand_data *);
-void gpmi_dump_info(struct gpmi_nand_data *);
-int bch_set_geometry(struct gpmi_nand_data *);
-int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
-int gpmi_send_command(struct gpmi_nand_data *);
-void gpmi_begin(struct gpmi_nand_data *);
-void gpmi_end(struct gpmi_nand_data *);
-int gpmi_read_data(struct gpmi_nand_data *);
-int gpmi_send_data(struct gpmi_nand_data *);
-int gpmi_send_page(struct gpmi_nand_data *,
-		   dma_addr_t payload, dma_addr_t auxiliary);
-int gpmi_read_page(struct gpmi_nand_data *,
-		   dma_addr_t payload, dma_addr_t auxiliary);
-
-void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
-		    const u8 *src, size_t src_bit_off,
-		    size_t nbits);
-
-/* BCH : Status Block Completion Codes */
-#define STATUS_GOOD		0x00
-#define STATUS_ERASED		0xff
-#define STATUS_UNCORRECTABLE	0xfe
-
-/* Use the devdata to distinguish different Archs. */
-#define GPMI_IS_MX23(x)		((x)->devdata->type == IS_MX23)
-#define GPMI_IS_MX28(x)		((x)->devdata->type == IS_MX28)
-#define GPMI_IS_MX6Q(x)		((x)->devdata->type == IS_MX6Q)
-#define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)
-#define GPMI_IS_MX7D(x)		((x)->devdata->type == IS_MX7D)
-
-#define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x) || \
-				 GPMI_IS_MX7D(x))
-#endif