mtd: nand: move raw NAND related code to the raw/ subdir

As part of the process of sharing more code between different NAND
based devices, we need to move all raw NAND related code to the raw/
subdirectory.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

1 files changed, 0 insertions, 1510 deletions

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
deleted file mode 100644
index 97787246af41..000000000000
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ /dev/null
@@ -1,1510 +0,0 @@
-/*
- * Freescale GPMI NAND Flash Driver
- *
- * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
- * Copyright (C) 2008 Embedded Alley Solutions, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-
-#include "gpmi-nand.h"
-#include "gpmi-regs.h"
-#include "bch-regs.h"
-
-static struct timing_threshold timing_default_threshold = {
-	.max_data_setup_cycles       = (BM_GPMI_TIMING0_DATA_SETUP >>
-						BP_GPMI_TIMING0_DATA_SETUP),
-	.internal_data_setup_in_ns   = 0,
-	.max_sample_delay_factor     = (BM_GPMI_CTRL1_RDN_DELAY >>
-						BP_GPMI_CTRL1_RDN_DELAY),
-	.max_dll_clock_period_in_ns  = 32,
-	.max_dll_delay_in_ns         = 16,
-};
-
-#define MXS_SET_ADDR		0x4
-#define MXS_CLR_ADDR		0x8
-/*
- * Clear the bit and poll it cleared.  This is usually called with
- * a reset address and mask being either SFTRST(bit 31) or CLKGATE
- * (bit 30).
- */
-static int clear_poll_bit(void __iomem *addr, u32 mask)
-{
-	int timeout = 0x400;
-
-	/* clear the bit */
-	writel(mask, addr + MXS_CLR_ADDR);
-
-	/*
-	 * SFTRST needs 3 GPMI clocks to settle, the reference manual
-	 * recommends to wait 1us.
-	 */
-	udelay(1);
-
-	/* poll the bit becoming clear */
-	while ((readl(addr) & mask) && --timeout)
-		/* nothing */;
-
-	return !timeout;
-}
-
-#define MODULE_CLKGATE		(1 << 30)
-#define MODULE_SFTRST		(1 << 31)
-/*
- * The current mxs_reset_block() will do two things:
- *  [1] enable the module.
- *  [2] reset the module.
- *
- * In most of the cases, it's ok.
- * But in MX23, there is a hardware bug in the BCH block (see erratum #2847).
- * If you try to soft reset the BCH block, it becomes unusable until
- * the next hard reset. This case occurs in the NAND boot mode. When the board
- * boots by NAND, the ROM of the chip will initialize the BCH blocks itself.
- * So If the driver tries to reset the BCH again, the BCH will not work anymore.
- * You will see a DMA timeout in this case. The bug has been fixed
- * in the following chips, such as MX28.
- *
- * To avoid this bug, just add a new parameter `just_enable` for
- * the mxs_reset_block(), and rewrite it here.
- */
-static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
-{
-	int ret;
-	int timeout = 0x400;
-
-	/* clear and poll SFTRST */
-	ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
-	if (unlikely(ret))
-		goto error;
-
-	/* clear CLKGATE */
-	writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR);
-
-	if (!just_enable) {
-		/* set SFTRST to reset the block */
-		writel(MODULE_SFTRST, reset_addr + MXS_SET_ADDR);
-		udelay(1);
-
-		/* poll CLKGATE becoming set */
-		while ((!(readl(reset_addr) & MODULE_CLKGATE)) && --timeout)
-			/* nothing */;
-		if (unlikely(!timeout))
-			goto error;
-	}
-
-	/* clear and poll SFTRST */
-	ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
-	if (unlikely(ret))
-		goto error;
-
-	/* clear and poll CLKGATE */
-	ret = clear_poll_bit(reset_addr, MODULE_CLKGATE);
-	if (unlikely(ret))
-		goto error;
-
-	return 0;
-
-error:
-	pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
-	return -ETIMEDOUT;
-}
-
-static int __gpmi_enable_clk(struct gpmi_nand_data *this, bool v)
-{
-	struct clk *clk;
-	int ret;
-	int i;
-
-	for (i = 0; i < GPMI_CLK_MAX; i++) {
-		clk = this->resources.clock[i];
-		if (!clk)
-			break;
-
-		if (v) {
-			ret = clk_prepare_enable(clk);
-			if (ret)
-				goto err_clk;
-		} else {
-			clk_disable_unprepare(clk);
-		}
-	}
-	return 0;
-
-err_clk:
-	for (; i > 0; i--)
-		clk_disable_unprepare(this->resources.clock[i - 1]);
-	return ret;
-}
-
-#define gpmi_enable_clk(x) __gpmi_enable_clk(x, true)
-#define gpmi_disable_clk(x) __gpmi_enable_clk(x, false)
-
-int gpmi_init(struct gpmi_nand_data *this)
-{
-	struct resources *r = &this->resources;
-	int ret;
-
-	ret = gpmi_enable_clk(this);
-	if (ret)
-		return ret;
-	ret = gpmi_reset_block(r->gpmi_regs, false);
-	if (ret)
-		goto err_out;
-
-	/*
-	 * Reset BCH here, too. We got failures otherwise :(
-	 * See later BCH reset for explanation of MX23 handling
-	 */
-	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
-	if (ret)
-		goto err_out;
-
-
-	/* Choose NAND mode. */
-	writel(BM_GPMI_CTRL1_GPMI_MODE, r->gpmi_regs + HW_GPMI_CTRL1_CLR);
-
-	/* Set the IRQ polarity. */
-	writel(BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY,
-				r->gpmi_regs + HW_GPMI_CTRL1_SET);
-
-	/* Disable Write-Protection. */
-	writel(BM_GPMI_CTRL1_DEV_RESET, r->gpmi_regs + HW_GPMI_CTRL1_SET);
-
-	/* Select BCH ECC. */
-	writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET);
-
-	/*
-	 * Decouple the chip select from dma channel. We use dma0 for all
-	 * the chips.
-	 */
-	writel(BM_GPMI_CTRL1_DECOUPLE_CS, r->gpmi_regs + HW_GPMI_CTRL1_SET);
-
-	gpmi_disable_clk(this);
-	return 0;
-err_out:
-	gpmi_disable_clk(this);
-	return ret;
-}
-
-/* This function is very useful. It is called only when the bug occur. */
-void gpmi_dump_info(struct gpmi_nand_data *this)
-{
-	struct resources *r = &this->resources;
-	struct bch_geometry *geo = &this->bch_geometry;
-	u32 reg;
-	int i;
-
-	dev_err(this->dev, "Show GPMI registers :\n");
-	for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) {
-		reg = readl(r->gpmi_regs + i * 0x10);
-		dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
-	}
-
-	/* start to print out the BCH info */
-	dev_err(this->dev, "Show BCH registers :\n");
-	for (i = 0; i <= HW_BCH_VERSION / 0x10 + 1; i++) {
-		reg = readl(r->bch_regs + i * 0x10);
-		dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
-	}
-	dev_err(this->dev, "BCH Geometry :\n"
-		"GF length              : %u\n"
-		"ECC Strength           : %u\n"
-		"Page Size in Bytes     : %u\n"
-		"Metadata Size in Bytes : %u\n"
-		"ECC Chunk Size in Bytes: %u\n"
-		"ECC Chunk Count        : %u\n"
-		"Payload Size in Bytes  : %u\n"
-		"Auxiliary Size in Bytes: %u\n"
-		"Auxiliary Status Offset: %u\n"
-		"Block Mark Byte Offset : %u\n"
-		"Block Mark Bit Offset  : %u\n",
-		geo->gf_len,
-		geo->ecc_strength,
-		geo->page_size,
-		geo->metadata_size,
-		geo->ecc_chunk_size,
-		geo->ecc_chunk_count,
-		geo->payload_size,
-		geo->auxiliary_size,
-		geo->auxiliary_status_offset,
-		geo->block_mark_byte_offset,
-		geo->block_mark_bit_offset);
-}
-
-/* Configures the geometry for BCH.  */
-int bch_set_geometry(struct gpmi_nand_data *this)
-{
-	struct resources *r = &this->resources;
-	struct bch_geometry *bch_geo = &this->bch_geometry;
-	unsigned int block_count;
-	unsigned int block_size;
-	unsigned int metadata_size;
-	unsigned int ecc_strength;
-	unsigned int page_size;
-	unsigned int gf_len;
-	int ret;
-
-	if (common_nfc_set_geometry(this))
-		return !0;
-
-	block_count   = bch_geo->ecc_chunk_count - 1;
-	block_size    = bch_geo->ecc_chunk_size;
-	metadata_size = bch_geo->metadata_size;
-	ecc_strength  = bch_geo->ecc_strength >> 1;
-	page_size     = bch_geo->page_size;
-	gf_len        = bch_geo->gf_len;
-
-	ret = gpmi_enable_clk(this);
-	if (ret)
-		return ret;
-
-	/*
-	* Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this
-	* chip, otherwise it will lock up. So we skip resetting BCH on the MX23.
-	* On the other hand, the MX28 needs the reset, because one case has been
-	* seen where the BCH produced ECC errors constantly after 10000
-	* consecutive reboots. The latter case has not been seen on the MX23
-	* yet, still we don't know if it could happen there as well.
-	*/
-	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
-	if (ret)
-		goto err_out;
-
-	/* Configure layout 0. */
-	writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)
-			| BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size)
-			| BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this)
-			| BF_BCH_FLASH0LAYOUT0_GF(gf_len, this)
-			| BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this),
-			r->bch_regs + HW_BCH_FLASH0LAYOUT0);
-
-	writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)
-			| BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this)
-			| BF_BCH_FLASH0LAYOUT1_GF(gf_len, this)
-			| BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
-			r->bch_regs + HW_BCH_FLASH0LAYOUT1);
-
-	/* Set *all* chip selects to use layout 0. */
-	writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
-
-	/* Enable interrupts. */
-	writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
-				r->bch_regs + HW_BCH_CTRL_SET);
-
-	gpmi_disable_clk(this);
-	return 0;
-err_out:
-	gpmi_disable_clk(this);
-	return ret;
-}
-
-/* Converts time in nanoseconds to cycles. */
-static unsigned int ns_to_cycles(unsigned int time,
-			unsigned int period, unsigned int min)
-{
-	unsigned int k;
-
-	k = (time + period - 1) / period;
-	return max(k, min);
-}
-
-#define DEF_MIN_PROP_DELAY	5
-#define DEF_MAX_PROP_DELAY	9
-/* Apply timing to current hardware conditions. */
-static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
-					struct gpmi_nfc_hardware_timing *hw)
-{
-	struct timing_threshold *nfc = &timing_default_threshold;
-	struct resources *r = &this->resources;
-	struct nand_chip *nand = &this->nand;
-	struct nand_timing target = this->timing;
-	bool improved_timing_is_available;
-	unsigned long clock_frequency_in_hz;
-	unsigned int clock_period_in_ns;
-	bool dll_use_half_periods;
-	unsigned int dll_delay_shift;
-	unsigned int max_sample_delay_in_ns;
-	unsigned int address_setup_in_cycles;
-	unsigned int data_setup_in_ns;
-	unsigned int data_setup_in_cycles;
-	unsigned int data_hold_in_cycles;
-	int ideal_sample_delay_in_ns;
-	unsigned int sample_delay_factor;
-	int tEYE;
-	unsigned int min_prop_delay_in_ns = DEF_MIN_PROP_DELAY;
-	unsigned int max_prop_delay_in_ns = DEF_MAX_PROP_DELAY;
-
-	/*
-	 * If there are multiple chips, we need to relax the timings to allow
-	 * for signal distortion due to higher capacitance.
-	 */
-	if (nand->numchips > 2) {
-		target.data_setup_in_ns    += 10;
-		target.data_hold_in_ns     += 10;
-		target.address_setup_in_ns += 10;
-	} else if (nand->numchips > 1) {
-		target.data_setup_in_ns    += 5;
-		target.data_hold_in_ns     += 5;
-		target.address_setup_in_ns += 5;
-	}
-
-	/* Check if improved timing information is available. */
-	improved_timing_is_available =
-		(target.tREA_in_ns  >= 0) &&
-		(target.tRLOH_in_ns >= 0) &&
-		(target.tRHOH_in_ns >= 0);
-
-	/* Inspect the clock. */
-	nfc->clock_frequency_in_hz = clk_get_rate(r->clock[0]);
-	clock_frequency_in_hz = nfc->clock_frequency_in_hz;
-	clock_period_in_ns    = NSEC_PER_SEC / clock_frequency_in_hz;
-
-	/*
-	 * The NFC quantizes setup and hold parameters in terms of clock cycles.
-	 * Here, we quantize the setup and hold timing parameters to the
-	 * next-highest clock period to make sure we apply at least the
-	 * specified times.
-	 *
-	 * For data setup and data hold, the hardware interprets a value of zero
-	 * as the largest possible delay. This is not what's intended by a zero
-	 * in the input parameter, so we impose a minimum of one cycle.
-	 */
-	data_setup_in_cycles    = ns_to_cycles(target.data_setup_in_ns,
-							clock_period_in_ns, 1);
-	data_hold_in_cycles     = ns_to_cycles(target.data_hold_in_ns,
-							clock_period_in_ns, 1);
-	address_setup_in_cycles = ns_to_cycles(target.address_setup_in_ns,
-							clock_period_in_ns, 0);
-
-	/*
-	 * The clock's period affects the sample delay in a number of ways:
-	 *
-	 * (1) The NFC HAL tells us the maximum clock period the sample delay
-	 *     DLL can tolerate. If the clock period is greater than half that
-	 *     maximum, we must configure the DLL to be driven by half periods.
-	 *
-	 * (2) We need to convert from an ideal sample delay, in ns, to a
-	 *     "sample delay factor," which the NFC uses. This factor depends on
-	 *     whether we're driving the DLL with full or half periods.
-	 *     Paraphrasing the reference manual:
-	 *
-	 *         AD = SDF x 0.125 x RP
-	 *
-	 * where:
-	 *
-	 *     AD   is the applied delay, in ns.
-	 *     SDF  is the sample delay factor, which is dimensionless.
-	 *     RP   is the reference period, in ns, which is a full clock period
-	 *          if the DLL is being driven by full periods, or half that if
-	 *          the DLL is being driven by half periods.
-	 *
-	 * Let's re-arrange this in a way that's more useful to us:
-	 *
-	 *                        8
-	 *         SDF  =  AD x ----
-	 *                       RP
-	 *
-	 * The reference period is either the clock period or half that, so this
-	 * is:
-	 *
-	 *                        8       AD x DDF
-	 *         SDF  =  AD x -----  =  --------
-	 *                      f x P        P
-	 *
-	 * where:
-	 *
-	 *       f  is 1 or 1/2, depending on how we're driving the DLL.
-	 *       P  is the clock period.
-	 *     DDF  is the DLL Delay Factor, a dimensionless value that
-	 *          incorporates all the constants in the conversion.
-	 *
-	 * DDF will be either 8 or 16, both of which are powers of two. We can
-	 * reduce the cost of this conversion by using bit shifts instead of
-	 * multiplication or division. Thus:
-	 *
-	 *                 AD << DDS
-	 *         SDF  =  ---------
-	 *                     P
-	 *
-	 *     or
-	 *
-	 *         AD  =  (SDF >> DDS) x P
-	 *
-	 * where:
-	 *
-	 *     DDS  is the DLL Delay Shift, the logarithm to base 2 of the DDF.
-	 */
-	if (clock_period_in_ns > (nfc->max_dll_clock_period_in_ns >> 1)) {
-		dll_use_half_periods = true;
-		dll_delay_shift      = 3 + 1;
-	} else {
-		dll_use_half_periods = false;
-		dll_delay_shift      = 3;
-	}
-
-	/*
-	 * Compute the maximum sample delay the NFC allows, under current
-	 * conditions. If the clock is running too slowly, no sample delay is
-	 * possible.
-	 */
-	if (clock_period_in_ns > nfc->max_dll_clock_period_in_ns)
-		max_sample_delay_in_ns = 0;
-	else {
-		/*
-		 * Compute the delay implied by the largest sample delay factor
-		 * the NFC allows.
-		 */
-		max_sample_delay_in_ns =
-			(nfc->max_sample_delay_factor * clock_period_in_ns) >>
-								dll_delay_shift;
-
-		/*
-		 * Check if the implied sample delay larger than the NFC
-		 * actually allows.
-		 */
-		if (max_sample_delay_in_ns > nfc->max_dll_delay_in_ns)
-			max_sample_delay_in_ns = nfc->max_dll_delay_in_ns;
-	}
-
-	/*
-	 * Check if improved timing information is available. If not, we have to
-	 * use a less-sophisticated algorithm.
-	 */
-	if (!improved_timing_is_available) {
-		/*
-		 * Fold the read setup time required by the NFC into the ideal
-		 * sample delay.
-		 */
-		ideal_sample_delay_in_ns = target.gpmi_sample_delay_in_ns +
-						nfc->internal_data_setup_in_ns;
-
-		/*
-		 * The ideal sample delay may be greater than the maximum
-		 * allowed by the NFC. If so, we can trade off sample delay time
-		 * for more data setup time.
-		 *
-		 * In each iteration of the following loop, we add a cycle to
-		 * the data setup time and subtract a corresponding amount from
-		 * the sample delay until we've satisified the constraints or
-		 * can't do any better.
-		 */
-		while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
-			(data_setup_in_cycles < nfc->max_data_setup_cycles)) {
-
-			data_setup_in_cycles++;
-			ideal_sample_delay_in_ns -= clock_period_in_ns;
-
-			if (ideal_sample_delay_in_ns < 0)
-				ideal_sample_delay_in_ns = 0;
-
-		}
-
-		/*
-		 * Compute the sample delay factor that corresponds most closely
-		 * to the ideal sample delay. If the result is too large for the
-		 * NFC, use the maximum value.
-		 *
-		 * Notice that we use the ns_to_cycles function to compute the
-		 * sample delay factor. We do this because the form of the
-		 * computation is the same as that for calculating cycles.
-		 */
-		sample_delay_factor =
-			ns_to_cycles(
-				ideal_sample_delay_in_ns << dll_delay_shift,
-							clock_period_in_ns, 0);
-
-		if (sample_delay_factor > nfc->max_sample_delay_factor)
-			sample_delay_factor = nfc->max_sample_delay_factor;
-
-		/* Skip to the part where we return our results. */
-		goto return_results;
-	}
-
-	/*
-	 * If control arrives here, we have more detailed timing information,
-	 * so we can use a better algorithm.
-	 */
-
-	/*
-	 * Fold the read setup time required by the NFC into the maximum
-	 * propagation delay.
-	 */
-	max_prop_delay_in_ns += nfc->internal_data_setup_in_ns;
-
-	/*
-	 * Earlier, we computed the number of clock cycles required to satisfy
-	 * the data setup time. Now, we need to know the actual nanoseconds.
-	 */
-	data_setup_in_ns = clock_period_in_ns * data_setup_in_cycles;
-
-	/*
-	 * Compute tEYE, the width of the data eye when reading from the NAND
-	 * Flash. The eye width is fundamentally determined by the data setup
-	 * time, perturbed by propagation delays and some characteristics of the
-	 * NAND Flash device.
-	 *
-	 * start of the eye = max_prop_delay + tREA
-	 * end of the eye   = min_prop_delay + tRHOH + data_setup
-	 */
-	tEYE = (int)min_prop_delay_in_ns + (int)target.tRHOH_in_ns +
-							(int)data_setup_in_ns;
-
-	tEYE -= (int)max_prop_delay_in_ns + (int)target.tREA_in_ns;
-
-	/*
-	 * The eye must be open. If it's not, we can try to open it by
-	 * increasing its main forcer, the data setup time.
-	 *
-	 * In each iteration of the following loop, we increase the data setup
-	 * time by a single clock cycle. We do this until either the eye is
-	 * open or we run into NFC limits.
-	 */
-	while ((tEYE <= 0) &&
-			(data_setup_in_cycles < nfc->max_data_setup_cycles)) {
-		/* Give a cycle to data setup. */
-		data_setup_in_cycles++;
-		/* Synchronize the data setup time with the cycles. */
-		data_setup_in_ns += clock_period_in_ns;
-		/* Adjust tEYE accordingly. */
-		tEYE += clock_period_in_ns;
-	}
-
-	/*
-	 * When control arrives here, the eye is open. The ideal time to sample
-	 * the data is in the center of the eye:
-	 *
-	 *     end of the eye + start of the eye
-	 *     ---------------------------------  -  data_setup
-	 *                    2
-	 *
-	 * After some algebra, this simplifies to the code immediately below.
-	 */
-	ideal_sample_delay_in_ns =
-		((int)max_prop_delay_in_ns +
-			(int)target.tREA_in_ns +
-				(int)min_prop_delay_in_ns +
-					(int)target.tRHOH_in_ns -
-						(int)data_setup_in_ns) >> 1;
-
-	/*
-	 * The following figure illustrates some aspects of a NAND Flash read:
-	 *
-	 *
-	 *           __                   _____________________________________
-	 * RDN         \_________________/
-	 *
-	 *                                         <---- tEYE ----->
-	 *                                        /-----------------\
-	 * Read Data ----------------------------<                   >---------
-	 *                                        \-----------------/
-	 *             ^                 ^                 ^              ^
-	 *             |                 |                 |              |
-	 *             |<--Data Setup -->|<--Delay Time -->|              |
-	 *             |                 |                 |              |
-	 *             |                 |                                |
-	 *             |                 |<--   Quantized Delay Time   -->|
-	 *             |                 |                                |
-	 *
-	 *
-	 * We have some issues we must now address:
-	 *
-	 * (1) The *ideal* sample delay time must not be negative. If it is, we
-	 *     jam it to zero.
-	 *
-	 * (2) The *ideal* sample delay time must not be greater than that
-	 *     allowed by the NFC. If it is, we can increase the data setup
-	 *     time, which will reduce the delay between the end of the data
-	 *     setup and the center of the eye. It will also make the eye
-	 *     larger, which might help with the next issue...
-	 *
-	 * (3) The *quantized* sample delay time must not fall either before the
-	 *     eye opens or after it closes (the latter is the problem
-	 *     illustrated in the above figure).
-	 */
-
-	/* Jam a negative ideal sample delay to zero. */
-	if (ideal_sample_delay_in_ns < 0)
-		ideal_sample_delay_in_ns = 0;
-
-	/*
-	 * Extend the data setup as needed to reduce the ideal sample delay
-	 * below the maximum permitted by the NFC.
-	 */
-	while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
-			(data_setup_in_cycles < nfc->max_data_setup_cycles)) {
-
-		/* Give a cycle to data setup. */
-		data_setup_in_cycles++;
-		/* Synchronize the data setup time with the cycles. */
-		data_setup_in_ns += clock_period_in_ns;
-		/* Adjust tEYE accordingly. */
-		tEYE += clock_period_in_ns;
-
-		/*
-		 * Decrease the ideal sample delay by one half cycle, to keep it
-		 * in the middle of the eye.
-		 */
-		ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
-
-		/* Jam a negative ideal sample delay to zero. */
-		if (ideal_sample_delay_in_ns < 0)
-			ideal_sample_delay_in_ns = 0;
-	}
-
-	/*
-	 * Compute the sample delay factor that corresponds to the ideal sample
-	 * delay. If the result is too large, then use the maximum allowed
-	 * value.
-	 *
-	 * Notice that we use the ns_to_cycles function to compute the sample
-	 * delay factor. We do this because the form of the computation is the
-	 * same as that for calculating cycles.
-	 */
-	sample_delay_factor =
-		ns_to_cycles(ideal_sample_delay_in_ns << dll_delay_shift,
-							clock_period_in_ns, 0);
-
-	if (sample_delay_factor > nfc->max_sample_delay_factor)
-		sample_delay_factor = nfc->max_sample_delay_factor;
-
-	/*
-	 * These macros conveniently encapsulate a computation we'll use to
-	 * continuously evaluate whether or not the data sample delay is inside
-	 * the eye.
-	 */
-	#define IDEAL_DELAY  ((int) ideal_sample_delay_in_ns)
-
-	#define QUANTIZED_DELAY  \
-		((int) ((sample_delay_factor * clock_period_in_ns) >> \
-							dll_delay_shift))
-
-	#define DELAY_ERROR  (abs(QUANTIZED_DELAY - IDEAL_DELAY))
-
-	#define SAMPLE_IS_NOT_WITHIN_THE_EYE  (DELAY_ERROR > (tEYE >> 1))
-
-	/*
-	 * While the quantized sample time falls outside the eye, reduce the
-	 * sample delay or extend the data setup to move the sampling point back
-	 * toward the eye. Do not allow the number of data setup cycles to
-	 * exceed the maximum allowed by the NFC.
-	 */
-	while (SAMPLE_IS_NOT_WITHIN_THE_EYE &&
-			(data_setup_in_cycles < nfc->max_data_setup_cycles)) {
-		/*
-		 * If control arrives here, the quantized sample delay falls
-		 * outside the eye. Check if it's before the eye opens, or after
-		 * the eye closes.
-		 */
-		if (QUANTIZED_DELAY > IDEAL_DELAY) {
-			/*
-			 * If control arrives here, the quantized sample delay
-			 * falls after the eye closes. Decrease the quantized
-			 * delay time and then go back to re-evaluate.
-			 */
-			if (sample_delay_factor != 0)
-				sample_delay_factor--;
-			continue;
-		}
-
-		/*
-		 * If control arrives here, the quantized sample delay falls
-		 * before the eye opens. Shift the sample point by increasing
-		 * data setup time. This will also make the eye larger.
-		 */
-
-		/* Give a cycle to data setup. */
-		data_setup_in_cycles++;
-		/* Synchronize the data setup time with the cycles. */
-		data_setup_in_ns += clock_period_in_ns;
-		/* Adjust tEYE accordingly. */
-		tEYE += clock_period_in_ns;
-
-		/*
-		 * Decrease the ideal sample delay by one half cycle, to keep it
-		 * in the middle of the eye.
-		 */
-		ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
-
-		/* ...and one less period for the delay time. */
-		ideal_sample_delay_in_ns -= clock_period_in_ns;
-
-		/* Jam a negative ideal sample delay to zero. */
-		if (ideal_sample_delay_in_ns < 0)
-			ideal_sample_delay_in_ns = 0;
-
-		/*
-		 * We have a new ideal sample delay, so re-compute the quantized
-		 * delay.
-		 */
-		sample_delay_factor =
-			ns_to_cycles(
-				ideal_sample_delay_in_ns << dll_delay_shift,
-							clock_period_in_ns, 0);
-
-		if (sample_delay_factor > nfc->max_sample_delay_factor)
-			sample_delay_factor = nfc->max_sample_delay_factor;
-	}
-
-	/* Control arrives here when we're ready to return our results. */
-return_results:
-	hw->data_setup_in_cycles    = data_setup_in_cycles;
-	hw->data_hold_in_cycles     = data_hold_in_cycles;
-	hw->address_setup_in_cycles = address_setup_in_cycles;
-	hw->use_half_periods        = dll_use_half_periods;
-	hw->sample_delay_factor     = sample_delay_factor;
-	hw->device_busy_timeout     = GPMI_DEFAULT_BUSY_TIMEOUT;
-	hw->wrn_dly_sel             = BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS;
-
-	/* Return success. */
-	return 0;
-}
-
-/*
- * <1> Firstly, we should know what's the GPMI-clock means.
- *     The GPMI-clock is the internal clock in the gpmi nand controller.
- *     If you set 100MHz to gpmi nand controller, the GPMI-clock's period
- *     is 10ns. Mark the GPMI-clock's period as GPMI-clock-period.
- *
- * <2> Secondly, we should know what's the frequency on the nand chip pins.
- *     The frequency on the nand chip pins is derived from the GPMI-clock.
- *     We can get it from the following equation:
- *
- *         F = G / (DS + DH)
- *
- *         F  : the frequency on the nand chip pins.
- *         G  : the GPMI clock, such as 100MHz.
- *         DS : GPMI_HW_GPMI_TIMING0:DATA_SETUP
- *         DH : GPMI_HW_GPMI_TIMING0:DATA_HOLD
- *
- * <3> Thirdly, when the frequency on the nand chip pins is above 33MHz,
- *     the nand EDO(extended Data Out) timing could be applied.
- *     The GPMI implements a feedback read strobe to sample the read data.
- *     The feedback read strobe can be delayed to support the nand EDO timing
- *     where the read strobe may deasserts before the read data is valid, and
- *     read data is valid for some time after read strobe.
- *
- *     The following figure illustrates some aspects of a NAND Flash read:
- *
- *                   |<---tREA---->|
- *                   |             |
- *                   |         |   |
- *                   |<--tRP-->|   |
- *                   |         |   |
- *                  __          ___|__________________________________
- *     RDN            \________/   |
- *                                 |
- *                                 /---------\
- *     Read Data    --------------<           >---------
- *                                 \---------/
- *                                |     |
- *                                |<-D->|
- *     FeedbackRDN  ________             ____________
- *                          \___________/
- *
- *          D stands for delay, set in the HW_GPMI_CTRL1:RDN_DELAY.
- *
- *
- * <4> Now, we begin to describe how to compute the right RDN_DELAY.
- *
- *  4.1) From the aspect of the nand chip pins:
- *        Delay = (tREA + C - tRP)               {1}
- *
- *        tREA : the maximum read access time. From the ONFI nand standards,
- *               we know that tREA is 16ns in mode 5, tREA is 20ns is mode 4.
- *               Please check it in : www.onfi.org
- *        C    : a constant for adjust the delay. default is 4.
- *        tRP  : the read pulse width.
- *               Specified by the HW_GPMI_TIMING0:DATA_SETUP:
- *                    tRP = (GPMI-clock-period) * DATA_SETUP
- *
- *  4.2) From the aspect of the GPMI nand controller:
- *         Delay = RDN_DELAY * 0.125 * RP        {2}
- *
- *         RP   : the DLL reference period.
- *            if (GPMI-clock-period > DLL_THRETHOLD)
- *                   RP = GPMI-clock-period / 2;
- *            else
- *                   RP = GPMI-clock-period;
- *
- *            Set the HW_GPMI_CTRL1:HALF_PERIOD if GPMI-clock-period
- *            is greater DLL_THRETHOLD. In other SOCs, the DLL_THRETHOLD
- *            is 16ns, but in mx6q, we use 12ns.
- *
- *  4.3) since {1} equals {2}, we get:
- *
- *                    (tREA + 4 - tRP) * 8
- *         RDN_DELAY = ---------------------     {3}
- *                           RP
- *
- *  4.4) We only support the fastest asynchronous mode of ONFI nand.
- *       For some ONFI nand, the mode 4 is the fastest mode;
- *       while for some ONFI nand, the mode 5 is the fastest mode.
- *       So we only support the mode 4 and mode 5. It is no need to
- *       support other modes.
- */
-static void gpmi_compute_edo_timing(struct gpmi_nand_data *this,
-			struct gpmi_nfc_hardware_timing *hw)
-{
-	struct resources *r = &this->resources;
-	unsigned long rate = clk_get_rate(r->clock[0]);
-	int mode = this->timing_mode;
-	int dll_threshold = this->devdata->max_chain_delay;
-	unsigned long delay;
-	unsigned long clk_period;
-	int t_rea;
-	int c = 4;
-	int t_rp;
-	int rp;
-
-	/*
-	 * [1] for GPMI_HW_GPMI_TIMING0:
-	 *     The async mode requires 40MHz for mode 4, 50MHz for mode 5.
-	 *     The GPMI can support 100MHz at most. So if we want to
-	 *     get the 40MHz or 50MHz, we have to set DS=1, DH=1.
-	 *     Set the ADDRESS_SETUP to 0 in mode 4.
-	 */
-	hw->data_setup_in_cycles = 1;
-	hw->data_hold_in_cycles = 1;
-	hw->address_setup_in_cycles = ((mode == 5) ? 1 : 0);
-
-	/* [2] for GPMI_HW_GPMI_TIMING1 */
-	hw->device_busy_timeout = 0x9000;
-
-	/* [3] for GPMI_HW_GPMI_CTRL1 */
-	hw->wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY;
-
-	/*
-	 * Enlarge 10 times for the numerator and denominator in {3}.
-	 * This make us to get more accurate result.
-	 */
-	clk_period = NSEC_PER_SEC / (rate / 10);
-	dll_threshold *= 10;
-	t_rea = ((mode == 5) ? 16 : 20) * 10;
-	c *= 10;
-
-	t_rp = clk_period * 1; /* DATA_SETUP is 1 */
-
-	if (clk_period > dll_threshold) {
-		hw->use_half_periods = 1;
-		rp = clk_period / 2;
-	} else {
-		hw->use_half_periods = 0;
-		rp = clk_period;
-	}
-
-	/*
-	 * Multiply the numerator with 10, we could do a round off:
-	 *      7.8 round up to 8; 7.4 round down to 7.
-	 */
-	delay  = (((t_rea + c - t_rp) * 8) * 10) / rp;
-	delay = (delay + 5) / 10;
-
-	hw->sample_delay_factor = delay;
-}
-
-static int enable_edo_mode(struct gpmi_nand_data *this, int mode)
-{
-	struct resources  *r = &this->resources;
-	struct nand_chip *nand = &this->nand;
-	struct mtd_info	 *mtd = nand_to_mtd(nand);
-	uint8_t *feature;
-	unsigned long rate;
-	int ret;
-
-	feature = kzalloc(ONFI_SUBFEATURE_PARAM_LEN, GFP_KERNEL);
-	if (!feature)
-		return -ENOMEM;
-
-	nand->select_chip(mtd, 0);
-
-	/* [1] send SET FEATURE command to NAND */
-	feature[0] = mode;
-	ret = nand->onfi_set_features(mtd, nand,
-				ONFI_FEATURE_ADDR_TIMING_MODE, feature);
-	if (ret)
-		goto err_out;
-
-	/* [2] send GET FEATURE command to double-check the timing mode */
-	memset(feature, 0, ONFI_SUBFEATURE_PARAM_LEN);
-	ret = nand->onfi_get_features(mtd, nand,
-				ONFI_FEATURE_ADDR_TIMING_MODE, feature);
-	if (ret || feature[0] != mode)
-		goto err_out;
-
-	nand->select_chip(mtd, -1);
-
-	/* [3] set the main IO clock, 100MHz for mode 5, 80MHz for mode 4. */
-	rate = (mode == 5) ? 100000000 : 80000000;
-	clk_set_rate(r->clock[0], rate);
-
-	/* Let the gpmi_begin() re-compute the timing again. */
-	this->flags &= ~GPMI_TIMING_INIT_OK;
-
-	this->flags |= GPMI_ASYNC_EDO_ENABLED;
-	this->timing_mode = mode;
-	kfree(feature);
-	dev_info(this->dev, "enable the asynchronous EDO mode %d\n", mode);
-	return 0;
-
-err_out:
-	nand->select_chip(mtd, -1);
-	kfree(feature);
-	dev_err(this->dev, "mode:%d ,failed in set feature.\n", mode);
-	return -EINVAL;
-}
-
-int gpmi_extra_init(struct gpmi_nand_data *this)
-{
-	struct nand_chip *chip = &this->nand;
-
-	/* Enable the asynchronous EDO feature. */
-	if (GPMI_IS_MX6(this) && chip->onfi_version) {
-		int mode = onfi_get_async_timing_mode(chip);
-
-		/* We only support the timing mode 4 and mode 5. */
-		if (mode & ONFI_TIMING_MODE_5)
-			mode = 5;
-		else if (mode & ONFI_TIMING_MODE_4)
-			mode = 4;
-		else
-			return 0;
-
-		return enable_edo_mode(this, mode);
-	}
-	return 0;
-}
-
-/* Begin the I/O */
-void gpmi_begin(struct gpmi_nand_data *this)
-{
-	struct resources *r = &this->resources;
-	void __iomem *gpmi_regs = r->gpmi_regs;
-	unsigned int   clock_period_in_ns;
-	uint32_t       reg;
-	unsigned int   dll_wait_time_in_us;
-	struct gpmi_nfc_hardware_timing  hw;
-	int ret;
-
-	/* Enable the clock. */
-	ret = gpmi_enable_clk(this);
-	if (ret) {
-		dev_err(this->dev, "We failed in enable the clk\n");
-		goto err_out;
-	}
-
-	/* Only initialize the timing once */
-	if (this->flags & GPMI_TIMING_INIT_OK)
-		return;
-	this->flags |= GPMI_TIMING_INIT_OK;
-
-	if (this->flags & GPMI_ASYNC_EDO_ENABLED)
-		gpmi_compute_edo_timing(this, &hw);
-	else
-		gpmi_nfc_compute_hardware_timing(this, &hw);
-
-	/* [1] Set HW_GPMI_TIMING0 */
-	reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) |
-		BF_GPMI_TIMING0_DATA_HOLD(hw.data_hold_in_cycles)         |
-		BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles);
-
-	writel(reg, gpmi_regs + HW_GPMI_TIMING0);
-
-	/* [2] Set HW_GPMI_TIMING1 */
-	writel(BF_GPMI_TIMING1_BUSY_TIMEOUT(hw.device_busy_timeout),
-		gpmi_regs + HW_GPMI_TIMING1);
-
-	/* [3] The following code is to set the HW_GPMI_CTRL1. */
-
-	/* Set the WRN_DLY_SEL */
-	writel(BM_GPMI_CTRL1_WRN_DLY_SEL, gpmi_regs + HW_GPMI_CTRL1_CLR);
-	writel(BF_GPMI_CTRL1_WRN_DLY_SEL(hw.wrn_dly_sel),
-					gpmi_regs + HW_GPMI_CTRL1_SET);
-
-	/* DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD. */
-	writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR);
-
-	/* Clear out the DLL control fields. */
-	reg = BM_GPMI_CTRL1_RDN_DELAY | BM_GPMI_CTRL1_HALF_PERIOD;
-	writel(reg, gpmi_regs + HW_GPMI_CTRL1_CLR);
-
-	/* If no sample delay is called for, return immediately. */
-	if (!hw.sample_delay_factor)
-		return;
-
-	/* Set RDN_DELAY or HALF_PERIOD. */
-	reg = ((hw.use_half_periods) ? BM_GPMI_CTRL1_HALF_PERIOD : 0)
-		| BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor);
-
-	writel(reg, gpmi_regs + HW_GPMI_CTRL1_SET);
-
-	/* At last, we enable the DLL. */
-	writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_SET);
-
-	/*
-	 * After we enable the GPMI DLL, we have to wait 64 clock cycles before
-	 * we can use the GPMI. Calculate the amount of time we need to wait,
-	 * in microseconds.
-	 */
-	clock_period_in_ns = NSEC_PER_SEC / clk_get_rate(r->clock[0]);
-	dll_wait_time_in_us = (clock_period_in_ns * 64) / 1000;
-
-	if (!dll_wait_time_in_us)
-		dll_wait_time_in_us = 1;
-
-	/* Wait for the DLL to settle. */
-	udelay(dll_wait_time_in_us);
-
-err_out:
-	return;
-}
-
-void gpmi_end(struct gpmi_nand_data *this)
-{
-	gpmi_disable_clk(this);
-}
-
-/* Clears a BCH interrupt. */
-void gpmi_clear_bch(struct gpmi_nand_data *this)
-{
-	struct resources *r = &this->resources;
-	writel(BM_BCH_CTRL_COMPLETE_IRQ, r->bch_regs + HW_BCH_CTRL_CLR);
-}
-
-/* Returns the Ready/Busy status of the given chip. */
-int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
-{
-	struct resources *r = &this->resources;
-	uint32_t mask = 0;
-	uint32_t reg = 0;
-
-	if (GPMI_IS_MX23(this)) {
-		mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
-		reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
-	} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) {
-		/*
-		 * In the imx6, all the ready/busy pins are bound
-		 * together. So we only need to check chip 0.
-		 */
-		if (GPMI_IS_MX6(this))
-			chip = 0;
-
-		/* MX28 shares the same R/B register as MX6Q. */
-		mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
-		reg = readl(r->gpmi_regs + HW_GPMI_STAT);
-	} else
-		dev_err(this->dev, "unknown arch.\n");
-	return reg & mask;
-}
-
-static inline void set_dma_type(struct gpmi_nand_data *this,
-					enum dma_ops_type type)
-{
-	this->last_dma_type = this->dma_type;
-	this->dma_type = type;
-}
-
-int gpmi_send_command(struct gpmi_nand_data *this)
-{
-	struct dma_chan *channel = get_dma_chan(this);
-	struct dma_async_tx_descriptor *desc;
-	struct scatterlist *sgl;
-	int chip = this->current_chip;
-	u32 pio[3];
-
-	/* [1] send out the PIO words */
-	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE)
-		| BM_GPMI_CTRL0_WORD_LENGTH
-		| BF_GPMI_CTRL0_CS(chip, this)
-		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
-		| BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_CLE)
-		| BM_GPMI_CTRL0_ADDRESS_INCREMENT
-		| BF_GPMI_CTRL0_XFER_COUNT(this->command_length);
-	pio[1] = pio[2] = 0;
-	desc = dmaengine_prep_slave_sg(channel,
-					(struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
-	if (!desc)
-		return -EINVAL;
-
-	/* [2] send out the COMMAND + ADDRESS string stored in @buffer */
-	sgl = &this->cmd_sgl;
-
-	sg_init_one(sgl, this->cmd_buffer, this->command_length);
-	dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
-	desc = dmaengine_prep_slave_sg(channel,
-				sgl, 1, DMA_MEM_TO_DEV,
-				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!desc)
-		return -EINVAL;
-
-	/* [3] submit the DMA */
-	set_dma_type(this, DMA_FOR_COMMAND);
-	return start_dma_without_bch_irq(this, desc);
-}
-
-int gpmi_send_data(struct gpmi_nand_data *this)
-{
-	struct dma_async_tx_descriptor *desc;
-	struct dma_chan *channel = get_dma_chan(this);
-	int chip = this->current_chip;
-	uint32_t command_mode;
-	uint32_t address;
-	u32 pio[2];
-
-	/* [1] PIO */
-	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
-	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
-
-	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
-		| BM_GPMI_CTRL0_WORD_LENGTH
-		| BF_GPMI_CTRL0_CS(chip, this)
-		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
-		| BF_GPMI_CTRL0_ADDRESS(address)
-		| BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
-	pio[1] = 0;
-	desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
-	if (!desc)
-		return -EINVAL;
-
-	/* [2] send DMA request */
-	prepare_data_dma(this, DMA_TO_DEVICE);
-	desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
-					1, DMA_MEM_TO_DEV,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!desc)
-		return -EINVAL;
-
-	/* [3] submit the DMA */
-	set_dma_type(this, DMA_FOR_WRITE_DATA);
-	return start_dma_without_bch_irq(this, desc);
-}
-
-int gpmi_read_data(struct gpmi_nand_data *this)
-{
-	struct dma_async_tx_descriptor *desc;
-	struct dma_chan *channel = get_dma_chan(this);
-	int chip = this->current_chip;
-	u32 pio[2];
-
-	/* [1] : send PIO */
-	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ)
-		| BM_GPMI_CTRL0_WORD_LENGTH
-		| BF_GPMI_CTRL0_CS(chip, this)
-		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
-		| BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
-		| BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
-	pio[1] = 0;
-	desc = dmaengine_prep_slave_sg(channel,
-					(struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
-	if (!desc)
-		return -EINVAL;
-
-	/* [2] : send DMA request */
-	prepare_data_dma(this, DMA_FROM_DEVICE);
-	desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
-					1, DMA_DEV_TO_MEM,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!desc)
-		return -EINVAL;
-
-	/* [3] : submit the DMA */
-	set_dma_type(this, DMA_FOR_READ_DATA);
-	return start_dma_without_bch_irq(this, desc);
-}
-
-int gpmi_send_page(struct gpmi_nand_data *this,
-			dma_addr_t payload, dma_addr_t auxiliary)
-{
-	struct bch_geometry *geo = &this->bch_geometry;
-	uint32_t command_mode;
-	uint32_t address;
-	uint32_t ecc_command;
-	uint32_t buffer_mask;
-	struct dma_async_tx_descriptor *desc;
-	struct dma_chan *channel = get_dma_chan(this);
-	int chip = this->current_chip;
-	u32 pio[6];
-
-	/* A DMA descriptor that does an ECC page read. */
-	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
-	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
-	ecc_command  = BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE;
-	buffer_mask  = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE |
-				BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
-
-	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
-		| BM_GPMI_CTRL0_WORD_LENGTH
-		| BF_GPMI_CTRL0_CS(chip, this)
-		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
-		| BF_GPMI_CTRL0_ADDRESS(address)
-		| BF_GPMI_CTRL0_XFER_COUNT(0);
-	pio[1] = 0;
-	pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
-		| BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
-		| BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
-	pio[3] = geo->page_size;
-	pio[4] = payload;
-	pio[5] = auxiliary;
-
-	desc = dmaengine_prep_slave_sg(channel,
-					(struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_TRANS_NONE,
-					DMA_CTRL_ACK);
-	if (!desc)
-		return -EINVAL;
-
-	set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE);
-	return start_dma_with_bch_irq(this, desc);
-}
-
-int gpmi_read_page(struct gpmi_nand_data *this,
-				dma_addr_t payload, dma_addr_t auxiliary)
-{
-	struct bch_geometry *geo = &this->bch_geometry;
-	uint32_t command_mode;
-	uint32_t address;
-	uint32_t ecc_command;
-	uint32_t buffer_mask;
-	struct dma_async_tx_descriptor *desc;
-	struct dma_chan *channel = get_dma_chan(this);
-	int chip = this->current_chip;
-	u32 pio[6];
-
-	/* [1] Wait for the chip to report ready. */
-	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
-	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
-
-	pio[0] =  BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
-		| BM_GPMI_CTRL0_WORD_LENGTH
-		| BF_GPMI_CTRL0_CS(chip, this)
-		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
-		| BF_GPMI_CTRL0_ADDRESS(address)
-		| BF_GPMI_CTRL0_XFER_COUNT(0);
-	pio[1] = 0;
-	desc = dmaengine_prep_slave_sg(channel,
-				(struct scatterlist *)pio, 2,
-				DMA_TRANS_NONE, 0);
-	if (!desc)
-		return -EINVAL;
-
-	/* [2] Enable the BCH block and read. */
-	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ;
-	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
-	ecc_command  = BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE;
-	buffer_mask  = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE
-			| BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
-
-	pio[0] =  BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
-		| BM_GPMI_CTRL0_WORD_LENGTH
-		| BF_GPMI_CTRL0_CS(chip, this)
-		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
-		| BF_GPMI_CTRL0_ADDRESS(address)
-		| BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
-
-	pio[1] = 0;
-	pio[2] =  BM_GPMI_ECCCTRL_ENABLE_ECC
-		| BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
-		| BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
-	pio[3] = geo->page_size;
-	pio[4] = payload;
-	pio[5] = auxiliary;
-	desc = dmaengine_prep_slave_sg(channel,
-					(struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_TRANS_NONE,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!desc)
-		return -EINVAL;
-
-	/* [3] Disable the BCH block */
-	command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
-	address      = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
-
-	pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
-		| BM_GPMI_CTRL0_WORD_LENGTH
-		| BF_GPMI_CTRL0_CS(chip, this)
-		| BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
-		| BF_GPMI_CTRL0_ADDRESS(address)
-		| BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
-	pio[1] = 0;
-	pio[2] = 0; /* clear GPMI_HW_GPMI_ECCCTRL, disable the BCH. */
-	desc = dmaengine_prep_slave_sg(channel,
-				(struct scatterlist *)pio, 3,
-				DMA_TRANS_NONE,
-				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-	if (!desc)
-		return -EINVAL;
-
-	/* [4] submit the DMA */
-	set_dma_type(this, DMA_FOR_READ_ECC_PAGE);
-	return start_dma_with_bch_irq(this, desc);
-}
-
-/**
- * gpmi_copy_bits - copy bits from one memory region to another
- * @dst: destination buffer
- * @dst_bit_off: bit offset we're starting to write at
- * @src: source buffer
- * @src_bit_off: bit offset we're starting to read from
- * @nbits: number of bits to copy
- *
- * This functions copies bits from one memory region to another, and is used by
- * the GPMI driver to copy ECC sections which are not guaranteed to be byte
- * aligned.
- *
- * src and dst should not overlap.
- *
- */
-void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
-		    const u8 *src, size_t src_bit_off,
-		    size_t nbits)
-{
-	size_t i;
-	size_t nbytes;
-	u32 src_buffer = 0;
-	size_t bits_in_src_buffer = 0;
-
-	if (!nbits)
-		return;
-
-	/*
-	 * Move src and dst pointers to the closest byte pointer and store bit
-	 * offsets within a byte.
-	 */
-	src += src_bit_off / 8;
-	src_bit_off %= 8;
-
-	dst += dst_bit_off / 8;
-	dst_bit_off %= 8;
-
-	/*
-	 * Initialize the src_buffer value with bits available in the first
-	 * byte of data so that we end up with a byte aligned src pointer.
-	 */
-	if (src_bit_off) {
-		src_buffer = src[0] >> src_bit_off;
-		if (nbits >= (8 - src_bit_off)) {
-			bits_in_src_buffer += 8 - src_bit_off;
-		} else {
-			src_buffer &= GENMASK(nbits - 1, 0);
-			bits_in_src_buffer += nbits;
-		}
-		nbits -= bits_in_src_buffer;
-		src++;
-	}
-
-	/* Calculate the number of bytes that can be copied from src to dst. */
-	nbytes = nbits / 8;
-
-	/* Try to align dst to a byte boundary. */
-	if (dst_bit_off) {
-		if (bits_in_src_buffer < (8 - dst_bit_off) && nbytes) {
-			src_buffer |= src[0] << bits_in_src_buffer;
-			bits_in_src_buffer += 8;
-			src++;
-			nbytes--;
-		}
-
-		if (bits_in_src_buffer >= (8 - dst_bit_off)) {
-			dst[0] &= GENMASK(dst_bit_off - 1, 0);
-			dst[0] |= src_buffer << dst_bit_off;
-			src_buffer >>= (8 - dst_bit_off);
-			bits_in_src_buffer -= (8 - dst_bit_off);
-			dst_bit_off = 0;
-			dst++;
-			if (bits_in_src_buffer > 7) {
-				bits_in_src_buffer -= 8;
-				dst[0] = src_buffer;
-				dst++;
-				src_buffer >>= 8;
-			}
-		}
-	}
-
-	if (!bits_in_src_buffer && !dst_bit_off) {
-		/*
-		 * Both src and dst pointers are byte aligned, thus we can
-		 * just use the optimized memcpy function.
-		 */
-		if (nbytes)
-			memcpy(dst, src, nbytes);
-	} else {
-		/*
-		 * src buffer is not byte aligned, hence we have to copy each
-		 * src byte to the src_buffer variable before extracting a byte
-		 * to store in dst.
-		 */
-		for (i = 0; i < nbytes; i++) {
-			src_buffer |= src[i] << bits_in_src_buffer;
-			dst[i] = src_buffer;
-			src_buffer >>= 8;
-		}
-	}
-	/* Update dst and src pointers */
-	dst += nbytes;
-	src += nbytes;
-
-	/*
-	 * nbits is the number of remaining bits. It should not exceed 8 as
-	 * we've already copied as much bytes as possible.
-	 */
-	nbits %= 8;
-
-	/*
-	 * If there's no more bits to copy to the destination and src buffer
-	 * was already byte aligned, then we're done.
-	 */
-	if (!nbits && !bits_in_src_buffer)
-		return;
-
-	/* Copy the remaining bits to src_buffer */
-	if (nbits)
-		src_buffer |= (*src & GENMASK(nbits - 1, 0)) <<
-			      bits_in_src_buffer;
-	bits_in_src_buffer += nbits;
-
-	/*
-	 * In case there were not enough bits to get a byte aligned dst buffer
-	 * prepare the src_buffer variable to match the dst organization (shift
-	 * src_buffer by dst_bit_off and retrieve the least significant bits
-	 * from dst).
-	 */
-	if (dst_bit_off)
-		src_buffer = (src_buffer << dst_bit_off) |
-			     (*dst & GENMASK(dst_bit_off - 1, 0));
-	bits_in_src_buffer += dst_bit_off;
-
-	/*
-	 * Keep most significant bits from dst if we end up with an unaligned
-	 * number of bits.
-	 */
-	nbytes = bits_in_src_buffer / 8;
-	if (bits_in_src_buffer % 8) {
-		src_buffer |= (dst[nbytes] &
-			       GENMASK(7, bits_in_src_buffer % 8)) <<
-			      (nbytes * 8);
-		nbytes++;
-	}
-
-	/* Copy the remaining bytes to dst */
-	for (i = 0; i < nbytes; i++) {
-		dst[i] = src_buffer;
-		src_buffer >>= 8;
-	}
-}