diff options
| author | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2012-07-05 00:13:55 +0400 |
|---|---|---|
| committer | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2012-07-05 00:13:55 +0400 |
| commit | 404c3bc30cb1361e1b3533643326ab472d24a618 (patch) | |
| tree | 156cc9032c8aee17167d926c5bdae009ba8f36d2 /drivers/mtd/nand/Kconfig | |
| parent | 6795a524f0b049ceb5417d5036ab5e233345b900 (diff) | |
| parent | 6887a4131da3adaab011613776d865f4bcfb5678 (diff) | |
| download | linux-404c3bc30cb1361e1b3533643326ab472d24a618.tar.xz | |
Merge commit 'v3.5-rc5' into next
Diffstat (limited to 'drivers/mtd/nand/Kconfig')
| -rw-r--r-- | drivers/mtd/nand/Kconfig | 42 |
1 files changed, 41 insertions, 1 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 7d17cecad69d..31bb7e5b504a 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -115,6 +115,46 @@ config MTD_NAND_OMAP2 Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4 platforms. +config MTD_NAND_OMAP_BCH + depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3 + bool "Enable support for hardware BCH error correction" + default n + select BCH + select BCH_CONST_PARAMS + help + Support for hardware BCH error correction. + +choice + prompt "BCH error correction capability" + depends on MTD_NAND_OMAP_BCH + +config MTD_NAND_OMAP_BCH8 + bool "8 bits / 512 bytes (recommended)" + help + Support correcting up to 8 bitflips per 512-byte block. + This will use 13 bytes of spare area per 512 bytes of page data. + This is the recommended mode, as 4-bit mode does not work + on some OMAP3 revisions, due to a hardware bug. + +config MTD_NAND_OMAP_BCH4 + bool "4 bits / 512 bytes" + help + Support correcting up to 4 bitflips per 512-byte block. + This will use 7 bytes of spare area per 512 bytes of page data. + Note that this mode does not work on some OMAP3 revisions, due to a + hardware bug. Please check your OMAP datasheet before selecting this + mode. + +endchoice + +if MTD_NAND_OMAP_BCH +config BCH_CONST_M + default 13 +config BCH_CONST_T + default 4 if MTD_NAND_OMAP_BCH4 + default 8 if MTD_NAND_OMAP_BCH8 +endif + config MTD_NAND_IDS tristate @@ -440,7 +480,7 @@ config MTD_NAND_NANDSIM config MTD_NAND_GPMI_NAND bool "GPMI NAND Flash Controller driver" - depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28) + depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q) help Enables NAND Flash support for IMX23 or IMX28. The GPMI controller is very powerful, with the help of BCH |