Merge 5.6-rc7 into staging-next

We need the staging/iio fixes in here as well

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

11 files changed, 149 insertions, 17 deletions

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index aa54d359dab7..a971c4bcc442 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1732,8 +1732,11 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
 	 * the erase operation does not exceed the max_busy_timeout, we should
 	 * use R1B response. Or we need to prevent the host from doing hw busy
 	 * detection, which is done by converting to a R1 response instead.
+	 * Note, some hosts requires R1B, which also means they are on their own
+	 * when it comes to deal with the busy timeout.
 	 */
-	if (card->host->max_busy_timeout &&
+	if (!(card->host->caps & MMC_CAP_NEED_RSP_BUSY) &&
+	    card->host->max_busy_timeout &&
 	    busy_timeout > card->host->max_busy_timeout) {
 		cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
 	} else {
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index f6912ded652d..de14b5845f52 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1910,9 +1910,12 @@ static int mmc_sleep(struct mmc_host *host)
 	 * If the max_busy_timeout of the host is specified, validate it against
 	 * the sleep cmd timeout. A failure means we need to prevent the host
 	 * from doing hw busy detection, which is done by converting to a R1
-	 * response instead of a R1B.
+	 * response instead of a R1B. Note, some hosts requires R1B, which also
+	 * means they are on their own when it comes to deal with the busy
+	 * timeout.
 	 */
-	if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) {
+	if (!(host->caps & MMC_CAP_NEED_RSP_BUSY) && host->max_busy_timeout &&
+	    (timeout_ms > host->max_busy_timeout)) {
 		cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
 	} else {
 		cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index da425ee2d9bf..e025604e17d4 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -542,9 +542,11 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 	 * If the max_busy_timeout of the host is specified, make sure it's
 	 * enough to fit the used timeout_ms. In case it's not, let's instruct
 	 * the host to avoid HW busy detection, by converting to a R1 response
-	 * instead of a R1B.
+	 * instead of a R1B. Note, some hosts requires R1B, which also means
+	 * they are on their own when it comes to deal with the busy timeout.
 	 */
-	if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout))
+	if (!(host->caps & MMC_CAP_NEED_RSP_BUSY) && host->max_busy_timeout &&
+	    (timeout_ms > host->max_busy_timeout))
 		use_r1b_resp = false;
 
 	cmd.opcode = MMC_SWITCH;
diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index bd50935dc37d..11087976ab19 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -606,19 +606,22 @@ static int sd_change_phase(struct realtek_pci_sdmmc *host,
 		u8 sample_point, bool rx)
 {
 	struct rtsx_pcr *pcr = host->pcr;
-
+	u16 SD_VP_CTL = 0;
 	dev_dbg(sdmmc_dev(host), "%s(%s): sample_point = %d\n",
 			__func__, rx ? "RX" : "TX", sample_point);
 
 	rtsx_pci_write_register(pcr, CLK_CTL, CHANGE_CLK, CHANGE_CLK);
-	if (rx)
+	if (rx) {
+		SD_VP_CTL = SD_VPRX_CTL;
 		rtsx_pci_write_register(pcr, SD_VPRX_CTL,
 			PHASE_SELECT_MASK, sample_point);
-	else
+	} else {
+		SD_VP_CTL = SD_VPTX_CTL;
 		rtsx_pci_write_register(pcr, SD_VPTX_CTL,
 			PHASE_SELECT_MASK, sample_point);
-	rtsx_pci_write_register(pcr, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
-	rtsx_pci_write_register(pcr, SD_VPCLK0_CTL, PHASE_NOT_RESET,
+	}
+	rtsx_pci_write_register(pcr, SD_VP_CTL, PHASE_NOT_RESET, 0);
+	rtsx_pci_write_register(pcr, SD_VP_CTL, PHASE_NOT_RESET,
 				PHASE_NOT_RESET);
 	rtsx_pci_write_register(pcr, CLK_CTL, CHANGE_CLK, 0);
 	rtsx_pci_write_register(pcr, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 9651dca6863e..2a2173d953f5 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -23,6 +23,7 @@
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/delay.h>
+#include <linux/dmi.h>
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/pm.h>
@@ -72,9 +73,16 @@ struct sdhci_acpi_host {
 	const struct sdhci_acpi_slot	*slot;
 	struct platform_device		*pdev;
 	bool				use_runtime_pm;
+	bool				is_intel;
+	bool				reset_signal_volt_on_suspend;
 	unsigned long			private[0] ____cacheline_aligned;
 };
 
+enum {
+	DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP			= BIT(0),
+	DMI_QUIRK_SD_NO_WRITE_PROTECT				= BIT(1),
+};
+
 static inline void *sdhci_acpi_priv(struct sdhci_acpi_host *c)
 {
 	return (void *)c->private;
@@ -391,6 +399,8 @@ static int intel_probe_slot(struct platform_device *pdev, struct acpi_device *ad
 	host->mmc_host_ops.start_signal_voltage_switch =
 					intel_start_signal_voltage_switch;
 
+	c->is_intel = true;
+
 	return 0;
 }
 
@@ -647,6 +657,36 @@ static const struct acpi_device_id sdhci_acpi_ids[] = {
 };
 MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids);
 
+static const struct dmi_system_id sdhci_acpi_quirks[] = {
+	{
+		/*
+		 * The Lenovo Miix 320-10ICR has a bug in the _PS0 method of
+		 * the SHC1 ACPI device, this bug causes it to reprogram the
+		 * wrong LDO (DLDO3) to 1.8V if 1.8V modes are used and the
+		 * card is (runtime) suspended + resumed. DLDO3 is used for
+		 * the LCD and setting it to 1.8V causes the LCD to go black.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 320-10ICR"),
+		},
+		.driver_data = (void *)DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP,
+	},
+	{
+		/*
+		 * The Acer Aspire Switch 10 (SW5-012) microSD slot always
+		 * reports the card being write-protected even though microSD
+		 * cards do not have a write-protect switch at all.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
+		},
+		.driver_data = (void *)DMI_QUIRK_SD_NO_WRITE_PROTECT,
+	},
+	{} /* Terminating entry */
+};
+
 static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(struct acpi_device *adev)
 {
 	const struct sdhci_acpi_uid_slot *u;
@@ -663,17 +703,23 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	const struct sdhci_acpi_slot *slot;
 	struct acpi_device *device, *child;
+	const struct dmi_system_id *id;
 	struct sdhci_acpi_host *c;
 	struct sdhci_host *host;
 	struct resource *iomem;
 	resource_size_t len;
 	size_t priv_size;
+	int quirks = 0;
 	int err;
 
 	device = ACPI_COMPANION(dev);
 	if (!device)
 		return -ENODEV;
 
+	id = dmi_first_match(sdhci_acpi_quirks);
+	if (id)
+		quirks = (long)id->driver_data;
+
 	slot = sdhci_acpi_get_slot(device);
 
 	/* Power on the SDHCI controller and its children */
@@ -759,6 +805,12 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
 			dev_warn(dev, "failed to setup card detect gpio\n");
 			c->use_runtime_pm = false;
 		}
+
+		if (quirks & DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP)
+			c->reset_signal_volt_on_suspend = true;
+
+		if (quirks & DMI_QUIRK_SD_NO_WRITE_PROTECT)
+			host->mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
 	}
 
 	err = sdhci_setup_host(host);
@@ -823,17 +875,39 @@ static int sdhci_acpi_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void __maybe_unused sdhci_acpi_reset_signal_voltage_if_needed(
+	struct device *dev)
+{
+	struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+	struct sdhci_host *host = c->host;
+
+	if (c->is_intel && c->reset_signal_volt_on_suspend &&
+	    host->mmc->ios.signal_voltage != MMC_SIGNAL_VOLTAGE_330) {
+		struct intel_host *intel_host = sdhci_acpi_priv(c);
+		unsigned int fn = INTEL_DSM_V33_SWITCH;
+		u32 result = 0;
+
+		intel_dsm(intel_host, dev, fn, &result);
+	}
+}
+
 #ifdef CONFIG_PM_SLEEP
 
 static int sdhci_acpi_suspend(struct device *dev)
 {
 	struct sdhci_acpi_host *c = dev_get_drvdata(dev);
 	struct sdhci_host *host = c->host;
+	int ret;
 
 	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
 		mmc_retune_needed(host->mmc);
 
-	return sdhci_suspend_host(host);
+	ret = sdhci_suspend_host(host);
+	if (ret)
+		return ret;
+
+	sdhci_acpi_reset_signal_voltage_if_needed(dev);
+	return 0;
 }
 
 static int sdhci_acpi_resume(struct device *dev)
@@ -853,11 +927,17 @@ static int sdhci_acpi_runtime_suspend(struct device *dev)
 {
 	struct sdhci_acpi_host *c = dev_get_drvdata(dev);
 	struct sdhci_host *host = c->host;
+	int ret;
 
 	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
 		mmc_retune_needed(host->mmc);
 
-	return sdhci_runtime_suspend_host(host);
+	ret = sdhci_runtime_suspend_host(host);
+	if (ret)
+		return ret;
+
+	sdhci_acpi_reset_signal_voltage_if_needed(dev);
+	return 0;
 }
 
 static int sdhci_acpi_runtime_resume(struct device *dev)
diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c
index 5827d3751b81..e573495f8726 100644
--- a/drivers/mmc/host/sdhci-cadence.c
+++ b/drivers/mmc/host/sdhci-cadence.c
@@ -11,6 +11,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 
 #include "sdhci-pltfm.h"
 
@@ -235,6 +236,11 @@ static const struct sdhci_ops sdhci_cdns_ops = {
 	.set_uhs_signaling = sdhci_cdns_set_uhs_signaling,
 };
 
+static const struct sdhci_pltfm_data sdhci_cdns_uniphier_pltfm_data = {
+	.ops = &sdhci_cdns_ops,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+};
+
 static const struct sdhci_pltfm_data sdhci_cdns_pltfm_data = {
 	.ops = &sdhci_cdns_ops,
 };
@@ -334,6 +340,7 @@ static void sdhci_cdns_hs400_enhanced_strobe(struct mmc_host *mmc,
 static int sdhci_cdns_probe(struct platform_device *pdev)
 {
 	struct sdhci_host *host;
+	const struct sdhci_pltfm_data *data;
 	struct sdhci_pltfm_host *pltfm_host;
 	struct sdhci_cdns_priv *priv;
 	struct clk *clk;
@@ -350,8 +357,12 @@ static int sdhci_cdns_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	data = of_device_get_match_data(dev);
+	if (!data)
+		data = &sdhci_cdns_pltfm_data;
+
 	nr_phy_params = sdhci_cdns_phy_param_count(dev->of_node);
-	host = sdhci_pltfm_init(pdev, &sdhci_cdns_pltfm_data,
+	host = sdhci_pltfm_init(pdev, data,
 				struct_size(priv, phy_params, nr_phy_params));
 	if (IS_ERR(host)) {
 		ret = PTR_ERR(host);
@@ -431,7 +442,10 @@ static const struct dev_pm_ops sdhci_cdns_pm_ops = {
 };
 
 static const struct of_device_id sdhci_cdns_match[] = {
-	{ .compatible = "socionext,uniphier-sd4hc" },
+	{
+		.compatible = "socionext,uniphier-sd4hc",
+		.data = &sdhci_cdns_uniphier_pltfm_data,
+	},
 	{ .compatible = "cdns,sd4hc" },
 	{ /* sentinel */ }
 };
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index c3a160c18047..3955fa5db43c 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -1590,7 +1590,7 @@ static u32 sdhci_msm_cqe_irq(struct sdhci_host *host, u32 intmask)
 	return 0;
 }
 
-void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery)
+static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	unsigned long flags;
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index ab2bd314a390..fcef5c0d0908 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -132,7 +132,8 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
 
 	sdhci_reset(host, mask);
 
-	if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	    || mmc_gpio_get_cd(host->mmc) >= 0)
 		sdhci_at91_set_force_card_detect(host);
 
 	if (priv->cal_always_on && (mask & SDHCI_RESET_ALL))
@@ -427,8 +428,11 @@ static int sdhci_at91_probe(struct platform_device *pdev)
 	 * detection procedure using the SDMCC_CD signal is bypassed.
 	 * This bit is reset when a software reset for all command is performed
 	 * so we need to implement our own reset function to set back this bit.
+	 *
+	 * WA: SAMA5D2 doesn't drive CMD if using CD GPIO line.
 	 */
-	if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	    || mmc_gpio_get_cd(host->mmc) >= 0)
 		sdhci_at91_set_force_card_detect(host);
 
 	pm_runtime_put_autosuspend(&pdev->dev);
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 882053151a47..c4978177ef88 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -1192,6 +1192,9 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	if (of_find_property(dev->of_node, "dmas", NULL))
 		sdhci_switch_external_dma(host, true);
 
+	/* R1B responses is required to properly manage HW busy detection. */
+	mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
+
 	ret = sdhci_setup_host(host);
 	if (ret)
 		goto err_put_sync;
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index 5eea8d70a85d..ce15a05f23d4 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -262,10 +262,26 @@ static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode)
 	return 0;
 }
 
+static void gli_pcie_enable_msi(struct sdhci_pci_slot *slot)
+{
+	int ret;
+
+	ret = pci_alloc_irq_vectors(slot->chip->pdev, 1, 1,
+				    PCI_IRQ_MSI | PCI_IRQ_MSIX);
+	if (ret < 0) {
+		pr_warn("%s: enable PCI MSI failed, error=%d\n",
+		       mmc_hostname(slot->host->mmc), ret);
+		return;
+	}
+
+	slot->host->irq = pci_irq_vector(slot->chip->pdev, 0);
+}
+
 static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
 {
 	struct sdhci_host *host = slot->host;
 
+	gli_pcie_enable_msi(slot);
 	slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
 	sdhci_enable_v4_mode(host);
 
@@ -276,6 +292,7 @@ static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
 {
 	struct sdhci_host *host = slot->host;
 
+	gli_pcie_enable_msi(slot);
 	slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
 	sdhci_enable_v4_mode(host);
 
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 403ac44a7378..a25c3a4d3f6c 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -1552,6 +1552,9 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 	if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
 		host->mmc->caps |= MMC_CAP_1_8V_DDR;
 
+	/* R1B responses is required to properly manage HW busy detection. */
+	host->mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
+
 	tegra_sdhci_parse_dt(host);
 
 	tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",