diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-11-04 00:28:14 +0400 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-11-04 00:28:14 +0400 |
commit | d6748066ad0e8b2514545998f8367ebb3906f299 (patch) | |
tree | f7a9bfd764a8fb781aeda0ef2249afbab42dddf7 /drivers/mmc | |
parent | f04c045f8ce69c22bda9d99eb927276b776135fc (diff) | |
parent | 3ba1e543ab4b02640d396098f2f6a199560d5f2d (diff) | |
download | linux-d6748066ad0e8b2514545998f8367ebb3906f299.tar.xz |
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits)
MIPS: O32: Provide definition of registers ta0 .. ta3.
MIPS: perf: Add Octeon support for hardware perf.
MIPS: perf: Add support for 64-bit perf counters.
MIPS: perf: Reorganize contents of perf support files.
MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c
MIPS: Add accessor macros for 64-bit performance counter registers.
MIPS: Add probes for more Octeon II CPUs.
MIPS: Add more CPU identifiers for Octeon II CPUs.
MIPS: XLR, XLS: Add comment for smp setup
MIPS: JZ4740: GPIO: Check correct IRQ in demux handler
MIPS: JZ4740: GPIO: Simplify IRQ demuxer
MIPS: JZ4740: Use generic irq chip
MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines
MIPS: Alchemy: kill au1xxx.h header
MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines
MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep
MIPS: Alchemy: Redo PCI as platform driver
MIPS: Alchemy: more base address cleanup
MIPS: Alchemy: rewrite USB platform setup.
MIPS: Alchemy: abstract USB block control register access
...
Fix up trivial conflicts in:
arch/mips/alchemy/devboards/db1x00/platform.c
drivers/ide/Kconfig
drivers/mmc/host/au1xmmc.c
drivers/video/Kconfig
sound/mips/Kconfig
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/host/Kconfig | 2 | ||||
-rw-r--r-- | drivers/mmc/host/au1xmmc.c | 92 |
2 files changed, 50 insertions, 44 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 87d5067ba629..cf444b0ca2cc 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -263,7 +263,7 @@ config MMC_WBSD config MMC_AU1X tristate "Alchemy AU1XX0 MMC Card Interface support" - depends on SOC_AU1200 + depends on MIPS_ALCHEMY help This selects the AMD Alchemy(R) Multimedia card interface. If you have a Alchemy platform with a MMC slot, say Y or M here. diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 707bc7dddd22..5d3b9ae64523 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -64,11 +64,8 @@ #define AU1XMMC_DESCRIPTOR_COUNT 1 /* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */ -#ifdef CONFIG_SOC_AU1100 -#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff -#else /* Au1200 */ -#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff -#endif +#define AU1100_MMC_DESCRIPTOR_SIZE 0x0000ffff +#define AU1200_MMC_DESCRIPTOR_SIZE 0x003fffff #define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \ MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \ @@ -127,6 +124,7 @@ struct au1xmmc_host { #define HOST_F_XMIT 0x0001 #define HOST_F_RECV 0x0002 #define HOST_F_DMA 0x0010 +#define HOST_F_DBDMA 0x0020 #define HOST_F_ACTIVE 0x0100 #define HOST_F_STOP 0x1000 @@ -151,6 +149,16 @@ struct au1xmmc_host { #define DMA_CHANNEL(h) \ (((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan) +static inline int has_dbdma(void) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1200: + return 1; + default: + return 0; + } +} + static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask) { u32 val = au_readl(HOST_CONFIG(host)); @@ -353,14 +361,12 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) data->bytes_xfered = 0; if (!data->error) { - if (host->flags & HOST_F_DMA) { -#ifdef CONFIG_SOC_AU1200 /* DBDMA */ + if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) { u32 chan = DMA_CHANNEL(host); chan_tab_t *c = *((chan_tab_t **)chan); au1x_dma_chan_t *cp = c->chan_ptr; data->bytes_xfered = cp->ddma_bytecnt; -#endif } else data->bytes_xfered = (data->blocks * data->blksz) - host->pio.len; @@ -570,11 +576,10 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) host->status = HOST_S_DATA; - if (host->flags & HOST_F_DMA) { -#ifdef CONFIG_SOC_AU1200 /* DBDMA */ + if ((host->flags & (HOST_F_DMA | HOST_F_DBDMA))) { u32 channel = DMA_CHANNEL(host); - /* Start the DMA as soon as the buffer gets something in it */ + /* Start the DBDMA as soon as the buffer gets something in it */ if (host->flags & HOST_F_RECV) { u32 mask = SD_STATUS_DB | SD_STATUS_NE; @@ -584,7 +589,6 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) } au1xxx_dbdma_start(channel); -#endif } } @@ -633,8 +637,7 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host, au_writel(data->blksz - 1, HOST_BLKSIZE(host)); - if (host->flags & HOST_F_DMA) { -#ifdef CONFIG_SOC_AU1200 /* DBDMA */ + if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) { int i; u32 channel = DMA_CHANNEL(host); @@ -663,7 +666,6 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host, datalen -= len; } -#endif } else { host->pio.index = 0; host->pio.offset = 0; @@ -838,7 +840,6 @@ static irqreturn_t au1xmmc_irq(int irq, void *dev_id) return IRQ_HANDLED; } -#ifdef CONFIG_SOC_AU1200 /* 8bit memory DMA device */ static dbdev_tab_t au1xmmc_mem_dbdev = { .dev_id = DSCR_CMD0_ALWAYS, @@ -905,7 +906,7 @@ static int au1xmmc_dbdma_init(struct au1xmmc_host *host) au1xxx_dbdma_ring_alloc(host->rx_chan, AU1XMMC_DESCRIPTOR_COUNT); /* DBDMA is good to go */ - host->flags |= HOST_F_DMA; + host->flags |= HOST_F_DMA | HOST_F_DBDMA; return 0; } @@ -918,7 +919,6 @@ static void au1xmmc_dbdma_shutdown(struct au1xmmc_host *host) au1xxx_dbdma_chan_free(host->rx_chan); } } -#endif static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en) { @@ -997,8 +997,16 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) mmc->f_min = 450000; mmc->f_max = 24000000; - mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE; - mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1100: + mmc->max_seg_size = AU1100_MMC_DESCRIPTOR_SIZE; + mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; + break; + case ALCHEMY_CPU_AU1200: + mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE; + mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; + break; + } mmc->max_blk_size = 2048; mmc->max_blk_count = 512; @@ -1028,11 +1036,11 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) tasklet_init(&host->finish_task, au1xmmc_tasklet_finish, (unsigned long)host); -#ifdef CONFIG_SOC_AU1200 - ret = au1xmmc_dbdma_init(host); - if (ret) - pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n"); -#endif + if (has_dbdma()) { + ret = au1xmmc_dbdma_init(host); + if (ret) + pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n"); + } #ifdef CONFIG_LEDS_CLASS if (host->platdata && host->platdata->led) { @@ -1073,9 +1081,8 @@ out5: au_writel(0, HOST_CONFIG2(host)); au_sync(); -#ifdef CONFIG_SOC_AU1200 - au1xmmc_dbdma_shutdown(host); -#endif + if (host->flags & HOST_F_DBDMA) + au1xmmc_dbdma_shutdown(host); tasklet_kill(&host->data_task); tasklet_kill(&host->finish_task); @@ -1120,9 +1127,9 @@ static int __devexit au1xmmc_remove(struct platform_device *pdev) tasklet_kill(&host->data_task); tasklet_kill(&host->finish_task); -#ifdef CONFIG_SOC_AU1200 - au1xmmc_dbdma_shutdown(host); -#endif + if (host->flags & HOST_F_DBDMA) + au1xmmc_dbdma_shutdown(host); + au1xmmc_set_power(host, 0); free_irq(host->irq, host); @@ -1181,24 +1188,23 @@ static struct platform_driver au1xmmc_driver = { static int __init au1xmmc_init(void) { -#ifdef CONFIG_SOC_AU1200 - /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride - * of 8 bits. And since devices are shared, we need to create - * our own to avoid freaking out other devices. - */ - memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev); - if (!memid) - pr_err("au1xmmc: cannot add memory dbdma dev\n"); -#endif + if (has_dbdma()) { + /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride + * of 8 bits. And since devices are shared, we need to create + * our own to avoid freaking out other devices. + */ + memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev); + if (!memid) + pr_err("au1xmmc: cannot add memory dbdma\n"); + } return platform_driver_register(&au1xmmc_driver); } static void __exit au1xmmc_exit(void) { -#ifdef CONFIG_SOC_AU1200 - if (memid) + if (has_dbdma() && memid) au1xxx_ddma_del_device(memid); -#endif + platform_driver_unregister(&au1xmmc_driver); } |