Merge tag 'mmc-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Introduce a host helper function to share re-tuning progress

  MMC host:
   - sdhci: Add support for v4 host mode
   - sdhci-of-arasan: Add Support for AM654 MMC and PHY
   - sdhci-sprd: Add support for Spreadtrum's host controller
   - sdhci-tegra: Add support for HS400 enhanced strobe
   - sdhci-tegra: Enable UHS/HS200 modes for Tegra186/210
   - sdhci-tegra: Add support for HS400 delay line calibration
   - sdhci-tegra: Add support for pad calibration
   - sdhci-of-dwcmshc: Address 128MB DMA boundary limitation
   - sdhci-of-esdhc: Add support for tuning erratum A008171
   - sdhci-iproc: Add ACPI support
   - mediatek: Add support for MT8183
   - mediatek: Improve the support for tuning
   - mediatek: Add bus clock control for MT2712
   - jz4740: Add support for the JZ4725B
   - mmci: Add support for the stm32 sdmmc variant
   - mmci: Add support for an optional reset control
   - mmci: Add some new variant specific properties/callbacks
   - mmci: Re-structure DMA code to prepare for new variants
   - renesas_sdhi: Add support for r8a77470, r8a7744 and r8a774a1
   - renesas_sdhi_internal_dmac: Whitelist r8a77970 and r8a774a1
   - tmio/uniphier-sd: Add new UniPhier SD/eMMC controller driver
   - tmio/renesas_sdhi: Deal properly with SCC detection during re-tune
   - tmio/renesas_sdhi: Refactor/consolidate clock management
   - omap_hsmmc: Drop cover detection and some unused platform data
   - dw_mmc-exynos: Enable tuning for more speed modes
   - sunxi: Clarify the new timing mode and enable it for the A64 controller
   - various: Convert to slot GPIO descriptors"

* tag 'mmc-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (129 commits)
  mmc: mediatek: drop too much code of tuning method
  mmc: mediatek: add MT8183 MMC driver support
  mmc: mediatek: tune CMD/DATA together
  mmc: mediatek: fix cannot receive new request when msdc_cmd_is_ready fail
  mmc: mediatek: fill the actual clock for mmc debugfs
  mmc: dt-bindings: add support for MT8183 SoC
  mmc: uniphier-sd: avoid using broken DMA RX channel
  mmc: uniphier-sd: fix DMA disabling
  mmc: tmio: simplify the DMA mode test
  mmc: tmio: remove TMIO_MMC_HAVE_HIGH_REG flag
  mmc: tmio: move MFD variant reset to a platform hook
  mmc: renesas_sdhi: Add r8a77470 SDHI1 support
  dt-bindings: mmc: renesas_sdhi: Add r8a77470 support
  mmc: mmci: add stm32 sdmmc variant
  dt-bindings: mmci: add stm32 sdmmc variant
  mmc: mmci: add stm32 sdmmc registers
  mmc: mmci: add clock divider for stm32 sdmmc
  mmc: mmci: add optional reset property
  dt-bindings: mmci: add optional reset property
  mmc: mmci: add variant property to not read datacnt
  ...

1 files changed, 35 insertions, 2 deletions

diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index f0bd36ce3817..b001cf4d3d7e 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -28,6 +28,7 @@
 
 #define SDHCI_DMA_ADDRESS	0x00
 #define SDHCI_ARGUMENT2		SDHCI_DMA_ADDRESS
+#define SDHCI_32BIT_BLK_CNT	SDHCI_DMA_ADDRESS
 
 #define SDHCI_BLOCK_SIZE	0x04
 #define  SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
@@ -41,6 +42,7 @@
 #define  SDHCI_TRNS_BLK_CNT_EN	0x02
 #define  SDHCI_TRNS_AUTO_CMD12	0x04
 #define  SDHCI_TRNS_AUTO_CMD23	0x08
+#define  SDHCI_TRNS_AUTO_SEL	0x0C
 #define  SDHCI_TRNS_READ	0x10
 #define  SDHCI_TRNS_MULTI	0x20
 
@@ -184,6 +186,9 @@
 #define   SDHCI_CTRL_DRV_TYPE_D		0x0030
 #define  SDHCI_CTRL_EXEC_TUNING		0x0040
 #define  SDHCI_CTRL_TUNED_CLK		0x0080
+#define  SDHCI_CMD23_ENABLE		0x0800
+#define  SDHCI_CTRL_V4_MODE		0x1000
+#define  SDHCI_CTRL_64BIT_ADDR		0x2000
 #define  SDHCI_CTRL_PRESET_VAL_ENABLE	0x8000
 
 #define SDHCI_CAPABILITIES	0x40
@@ -204,6 +209,7 @@
 #define  SDHCI_CAN_VDD_330	0x01000000
 #define  SDHCI_CAN_VDD_300	0x02000000
 #define  SDHCI_CAN_VDD_180	0x04000000
+#define  SDHCI_CAN_64BIT_V4	0x08000000
 #define  SDHCI_CAN_64BIT	0x10000000
 
 #define  SDHCI_SUPPORT_SDR50	0x00000001
@@ -270,6 +276,9 @@
 #define   SDHCI_SPEC_100	0
 #define   SDHCI_SPEC_200	1
 #define   SDHCI_SPEC_300	2
+#define   SDHCI_SPEC_400	3
+#define   SDHCI_SPEC_410	4
+#define   SDHCI_SPEC_420	5
 
 /*
  * End of controller registers.
@@ -305,8 +314,14 @@ struct sdhci_adma2_32_desc {
  */
 #define SDHCI_ADMA2_DESC_ALIGN	8
 
-/* ADMA2 64-bit DMA descriptor size */
-#define SDHCI_ADMA2_64_DESC_SZ	12
+/*
+ * ADMA2 64-bit DMA descriptor size
+ * According to SD Host Controller spec v4.10, there are two kinds of
+ * descriptors for 64-bit addressing mode: 96-bit Descriptor and 128-bit
+ * Descriptor, if Host Version 4 Enable is set in the Host Control 2
+ * register, 128-bit Descriptor will be selected.
+ */
+#define SDHCI_ADMA2_64_DESC_SZ(host)	((host)->v4_mode ? 16 : 12)
 
 /*
  * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
@@ -450,6 +465,13 @@ struct sdhci_host {
  * obtainable timeout.
  */
 #define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT			(1<<17)
+/*
+ * 32-bit block count may not support eMMC where upper bits of CMD23 are used
+ * for other purposes.  Consequently we support 16-bit block count by default.
+ * Otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit
+ * block count.
+ */
+#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT			(1<<18)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
@@ -501,6 +523,7 @@ struct sdhci_host {
 	bool preset_enabled;	/* Preset is enabled */
 	bool pending_reset;	/* Cmd/data reset is pending */
 	bool irq_wake_enabled;	/* IRQ wakeup is enabled */
+	bool v4_mode;		/* Host Version 4 Enable */
 
 	struct mmc_request *mrqs_done[SDHCI_MAX_MRQS];	/* Requests done */
 	struct mmc_command *cmd;	/* Current command */
@@ -554,6 +577,7 @@ struct sdhci_host {
 
 	unsigned int		tuning_count;	/* Timer count for re-tuning */
 	unsigned int		tuning_mode;	/* Re-tuning mode supported by host */
+	unsigned int		tuning_err;	/* Error code for re-tuning */
 #define SDHCI_TUNING_MODE_1	0
 #define SDHCI_TUNING_MODE_2	1
 #define SDHCI_TUNING_MODE_3	2
@@ -563,6 +587,9 @@ struct sdhci_host {
 	/* Host SDMA buffer boundary. */
 	u32			sdma_boundary;
 
+	/* Host ADMA table count */
+	u32			adma_table_cnt;
+
 	u64			data_timeout;
 
 	unsigned long private[0] ____cacheline_aligned;
@@ -603,6 +630,8 @@ struct sdhci_ops {
 	void    (*adma_workaround)(struct sdhci_host *host, u32 intmask);
 	void    (*card_event)(struct sdhci_host *host);
 	void	(*voltage_switch)(struct sdhci_host *host);
+	void	(*adma_write_desc)(struct sdhci_host *host, void **desc,
+				   dma_addr_t addr, int len, unsigned int cmd);
 };
 
 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
@@ -725,6 +754,7 @@ void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
 		     unsigned short vdd);
 void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
 			   unsigned short vdd);
+void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
 void sdhci_set_bus_width(struct sdhci_host *host, int width);
 void sdhci_reset(struct sdhci_host *host, u8 mask);
 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
@@ -733,6 +763,8 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
 int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 				      struct mmc_ios *ios);
 void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable);
+void sdhci_adma_write_desc(struct sdhci_host *host, void **desc,
+			   dma_addr_t addr, int len, unsigned int cmd);
 
 #ifdef CONFIG_PM
 int sdhci_suspend_host(struct sdhci_host *host);
@@ -747,6 +779,7 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
 		   int *data_error);
 
 void sdhci_dumpregs(struct sdhci_host *host);
+void sdhci_enable_v4_mode(struct sdhci_host *host);
 
 void sdhci_start_tuning(struct sdhci_host *host);
 void sdhci_end_tuning(struct sdhci_host *host);