Merge tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Let the dma map ops deal with bouncing and drop dma_max_pfn() from
     the dma-mapping interface for ARM
   - Convert the generic MMC DT doc to YAML schemas
   - Drop questionable support for powered-on re-init of SDIO cards at
     runtime resume and for SDIO HW reset
   - Prevent questionable re-init of powered-on removable SDIO cards at
     system resume
   - Cleanup and clarify some SDIO core code

  MMC host:
   - tmio: Make runtime PM enablement more flexible for variants
   - tmio/renesas_sdhi: Rename DT doc tmio_mmc.txt to renesas,sdhi.txt
     to clarify
   - sdhci-pci: Add support for Intel EHL
   - sdhci-pci-o2micro: Enable support for 8-bit bus
   - sdhci-msm: Prevent acquiring a mutex while holding a spin_lock
   - sdhci-of-esdhc: Improve clock management and tuning
   - sdhci_am654: Enable support for 4 and 8-bit bus on J721E
   - sdhci-sprd: Use pinctrl for a proper signal voltage switch
   - sdhci-sprd: Add support for HS400 enhanced strobe mode
   - sdhci-sprd: Enable PHY DLL and allow delay config to stabilize the
     clock
   - sdhci-sprd: Add support for optional gate clock
   - sunxi-mmc: Convert DT doc to YAML schemas
   - meson-gx: Add support for broken DRAM access for DMA

  MEMSTICK core:
   - Fixup error path of memstick_init()"

* tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits)
  mmc: sdhci_am654: Add dependency on MMC_SDHCI_AM654
  mmc: alcor: remove a redundant greater or equal to zero comparison
  mmc: sdhci-msm: fix mutex while in spinlock
  mmc: sdhci_am654: Make some symbols static
  dma-mapping: remove dma_max_pfn
  mmc: core: let the dma map ops handle bouncing
  dt-binding: mmc: rename tmio_mmc.txt to renesas,sdhi.txt
  mmc: sdhci-sprd: Add pin control support for voltage switch
  dt-bindings: mmc: sprd: Add pinctrl support
  mmc: sdhci-sprd: Add start_signal_voltage_switch ops
  mmc: sdhci-pci: Add support for Intel EHL
  mmc: tmio: Use dma_max_mapping_size() instead of a workaround
  mmc: sdio: Drop unused in-parameter from mmc_sdio_init_card()
  mmc: sdio: Drop unused in-parameter to mmc_sdio_reinit_card()
  mmc: sdio: Don't re-initialize powered-on removable SDIO cards at resume
  mmc: sdio: Drop powered-on re-init at runtime resume and HW reset
  mmc: sdio: Move comment about re-initialization to mmc_sdio_reinit_card()
  mmc: sdio: Drop mmc_claim|release_host() in mmc_sdio_power_restore()
  mmc: sdio: Turn sdio_run_irqs() into static
  mmc: sdhci: Fix indenting on SDHCI_CTRL_8BITBUS
  ...

1 files changed, 13 insertions, 4 deletions

diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 68c5866f5c85..4dd43b1adf2c 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -830,9 +830,17 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
 	bool hs400_tuning;
+	unsigned int clk;
 	u32 val;
 	int ret;
 
+	/* For tuning mode, the sd clock divisor value
+	 * must be larger than 3 according to reference manual.
+	 */
+	clk = esdhc->peripheral_clock / 3;
+	if (host->clock > clk)
+		esdhc_of_set_clock(host, clk);
+
 	if (esdhc->quirk_limited_clk_division &&
 	    host->flags & SDHCI_HS400_TUNING)
 		esdhc_of_set_clock(host, host->clock);
@@ -1040,11 +1048,12 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
 		/*
 		 * esdhc->peripheral_clock would be assigned with a value
 		 * which is eSDHC base clock when use periperal clock.
-		 * For ls1046a, the clock value got by common clk API is
-		 * peripheral clock while the eSDHC base clock is 1/2
-		 * peripheral clock.
+		 * For some platforms, the clock value got by common clk
+		 * API is peripheral clock while the eSDHC base clock is
+		 * 1/2 peripheral clock.
 		 */
-		if (of_device_is_compatible(np, "fsl,ls1046a-esdhc"))
+		if (of_device_is_compatible(np, "fsl,ls1046a-esdhc") ||
+		    of_device_is_compatible(np, "fsl,ls1028a-esdhc"))
 			esdhc->peripheral_clock = clk_get_rate(clk) / 2;
 		else
 			esdhc->peripheral_clock = clk_get_rate(clk);