Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

2 files changed, 36 insertions, 25 deletions

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index aaff683cd37d..a8ee4a36a1d8 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -592,7 +592,7 @@ static int ab8500_irq_init(struct ab8500 *ab8500, struct device_node *np)
 
 	/* If ->irq_base is zero this will give a linear mapping */
 	ab8500->domain = irq_domain_add_simple(NULL,
-			num_irqs, ab8500->irq_base,
+			num_irqs, 0,
 			&ab8500_irq_ops, ab8500);
 
 	if (!ab8500->domain) {
@@ -1583,14 +1583,13 @@ static int ab8500_probe(struct platform_device *pdev)
 	if (!ab8500)
 		return -ENOMEM;
 
-	if (plat)
-		ab8500->irq_base = plat->irq_base;
-
 	ab8500->dev = &pdev->dev;
 
 	resource = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!resource)
+	if (!resource) {
+		dev_err(&pdev->dev, "no IRQ resource\n");
 		return -ENODEV;
+	}
 
 	ab8500->irq = resource->start;
 
@@ -1612,8 +1611,10 @@ static int ab8500_probe(struct platform_device *pdev)
 	else {
 		ret = get_register_interruptible(ab8500, AB8500_MISC,
 			AB8500_IC_NAME_REG, &value);
-		if (ret < 0)
+		if (ret < 0) {
+			dev_err(&pdev->dev, "could not probe HW\n");
 			return ret;
+		}
 
 		ab8500->version = value;
 	}
@@ -1759,30 +1760,30 @@ static int ab8500_probe(struct platform_device *pdev)
 	if (is_ab9540(ab8500))
 		ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
 				ARRAY_SIZE(ab9540_devs), NULL,
-				ab8500->irq_base, ab8500->domain);
+				0, ab8500->domain);
 	else if (is_ab8540(ab8500)) {
 		ret = mfd_add_devices(ab8500->dev, 0, ab8540_devs,
 			      ARRAY_SIZE(ab8540_devs), NULL,
-			      ab8500->irq_base, NULL);
+			      0, ab8500->domain);
 		if (ret)
 			return ret;
 
 		if (is_ab8540_1p2_or_earlier(ab8500))
 			ret = mfd_add_devices(ab8500->dev, 0, ab8540_cut1_devs,
 			      ARRAY_SIZE(ab8540_cut1_devs), NULL,
-			      ab8500->irq_base, NULL);
+			      0, ab8500->domain);
 		else /* ab8540 >= cut2 */
 			ret = mfd_add_devices(ab8500->dev, 0, ab8540_cut2_devs,
 			      ARRAY_SIZE(ab8540_cut2_devs), NULL,
-			      ab8500->irq_base, NULL);
+			      0, ab8500->domain);
 	} else if (is_ab8505(ab8500))
 		ret = mfd_add_devices(ab8500->dev, 0, ab8505_devs,
 			      ARRAY_SIZE(ab8505_devs), NULL,
-			      ab8500->irq_base, ab8500->domain);
+			      0, ab8500->domain);
 	else
 		ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
 				ARRAY_SIZE(ab8500_devs), NULL,
-				ab8500->irq_base, ab8500->domain);
+				0, ab8500->domain);
 	if (ret)
 		return ret;
 
@@ -1790,7 +1791,7 @@ static int ab8500_probe(struct platform_device *pdev)
 		/* Add battery management devices */
 		ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs,
 				      ARRAY_SIZE(ab8500_bm_devs), NULL,
-				      ab8500->irq_base, ab8500->domain);
+				      0, ab8500->domain);
 		if (ret)
 			dev_err(ab8500->dev, "error adding bm devices\n");
 	}
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index e43e6e821117..7694e0700d34 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -25,6 +25,7 @@
 #include <linux/bitops.h>
 #include <linux/fs.h>
 #include <linux/of.h>
+#include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/uaccess.h>
 #include <linux/mfd/core.h>
@@ -2678,16 +2679,12 @@ static struct irq_domain_ops db8500_irq_ops = {
 	.xlate  = irq_domain_xlate_twocell,
 };
 
-static int db8500_irq_init(struct device_node *np, int irq_base)
+static int db8500_irq_init(struct device_node *np)
 {
 	int i;
 
-	/* In the device tree case, just take some IRQs */
-	if (np)
-		irq_base = 0;
-
 	db8500_irq_domain = irq_domain_add_simple(
-		np, NUM_PRCMU_WAKEUPS, irq_base,
+		np, NUM_PRCMU_WAKEUPS, 0,
 		&db8500_irq_ops, NULL);
 
 	if (!db8500_irq_domain) {
@@ -3114,10 +3111,10 @@ static void db8500_prcmu_update_cpufreq(void)
 }
 
 static int db8500_prcmu_register_ab8500(struct device *parent,
-					struct ab8500_platform_data *pdata,
-					int irq)
+					struct ab8500_platform_data *pdata)
 {
-	struct resource ab8500_resource = DEFINE_RES_IRQ(irq);
+	struct device_node *np;
+	struct resource ab8500_resource;
 	struct mfd_cell ab8500_cell = {
 		.name = "ab8500-core",
 		.of_compatible = "stericsson,ab8500",
@@ -3128,6 +3125,20 @@ static int db8500_prcmu_register_ab8500(struct device *parent,
 		.num_resources = 1,
 	};
 
+	if (!parent->of_node)
+		return -ENODEV;
+
+	/* Look up the device node, sneak the IRQ out of it */
+	for_each_child_of_node(parent->of_node, np) {
+		if (of_device_is_compatible(np, ab8500_cell.of_compatible))
+			break;
+	}
+	if (!np) {
+		dev_info(parent, "could not find AB8500 node in the device tree\n");
+		return -ENODEV;
+	}
+	of_irq_to_resource_table(np, &ab8500_resource, 1);
+
 	return mfd_add_devices(parent, 0, &ab8500_cell, 1, NULL, 0, NULL);
 }
 
@@ -3180,7 +3191,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
 		goto no_irq_return;
 	}
 
-	db8500_irq_init(np, pdata->irq_base);
+	db8500_irq_init(np);
 
 	prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
 
@@ -3205,8 +3216,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
 		}
 	}
 
-	err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata,
-					   pdata->ab_irq);
+	err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata);
 	if (err) {
 		mfd_remove_devices(&pdev->dev);
 		pr_err("prcmu: Failed to add ab8500 subdevice\n");