Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (209 commits)
  [SCSI] fix oops during scsi scanning
  [SCSI] libsrp: fix memory leak in srp_ring_free()
  [SCSI] libiscsi, bnx2i: make bound ep check common
  [SCSI] libiscsi: add completion function for drivers that do not need pdu processing
  [SCSI] scsi_dh_rdac: changes for rdac debug logging
  [SCSI] scsi_dh_rdac: changes to collect the rdac debug information during the initialization
  [SCSI] scsi_dh_rdac: move the init code from rdac_activate to rdac_bus_attach
  [SCSI] sg: fix oops in the error path in sg_build_indirect()
  [SCSI] mptsas : Bump version to 3.04.12
  [SCSI] mptsas : FW event thread and scsi mid layer deadlock in SYNCHRONIZE CACHE command
  [SCSI] mptsas : Send DID_NO_CONNECT for pending IOs of removed device
  [SCSI] mptsas : PAE Kernel more than 4 GB kernel panic
  [SCSI] mptsas : NULL pointer on big endian systems causing Expander not to tear off
  [SCSI] mptsas : Sanity check for phyinfo is added
  [SCSI] scsi_dh_rdac: Add support for Sun StorageTek ST2500, ST2510 and ST2530
  [SCSI] pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controller
  [SCSI] qla2xxx: Update version number to 8.03.01-k6.
  [SCSI] qla2xxx: Properly delete rports attached to a vport.
  [SCSI] qla2xxx: Correct various NPIV issues.
  [SCSI] qla2xxx: Correct qla2x00_eh_wait_on_command() to wait correctly.
  ...

7 files changed, 77 insertions, 208 deletions

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 5d0ba4f5924c..76fa2ee0b574 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1015,9 +1015,9 @@ mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
 {
 	SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
 	pSge->Address.Low = cpu_to_le32
-			(lower_32_bits((unsigned long)(dma_addr)));
+			(lower_32_bits(dma_addr));
 	pSge->Address.High = cpu_to_le32
-			(upper_32_bits((unsigned long)dma_addr));
+			(upper_32_bits(dma_addr));
 	pSge->FlagsLength = cpu_to_le32
 			((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
 }
@@ -1038,8 +1038,8 @@ mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
 	u32 tmp;
 
 	pSge->Address.Low = cpu_to_le32
-			(lower_32_bits((unsigned long)(dma_addr)));
-	tmp = (u32)(upper_32_bits((unsigned long)dma_addr));
+			(lower_32_bits(dma_addr));
+	tmp = (u32)(upper_32_bits(dma_addr));
 
 	/*
 	 * 1078 errata workaround for the 36GB limitation
@@ -1101,7 +1101,7 @@ mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
 		pChain->NextChainOffset = next;
 
 		pChain->Address.Low = cpu_to_le32(tmp);
-		tmp = (u32)(upper_32_bits((unsigned long)dma_addr));
+		tmp = (u32)(upper_32_bits(dma_addr));
 		pChain->Address.High = cpu_to_le32(tmp);
 }
 
@@ -1297,12 +1297,8 @@ mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
 	psge = (char *)&ioc_init->HostPageBufferSGE;
 	flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
 	    MPI_SGE_FLAGS_SYSTEM_ADDRESS |
-	    MPI_SGE_FLAGS_32_BIT_ADDRESSING |
 	    MPI_SGE_FLAGS_HOST_TO_IOC |
 	    MPI_SGE_FLAGS_END_OF_BUFFER;
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-	    flags_length |= MPI_SGE_FLAGS_64_BIT_ADDRESSING;
-	}
 	flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
 	flags_length |= ioc->HostPageBuffer_sz;
 	ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
@@ -2224,8 +2220,6 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 	int	 hard;
 	int	 rc=0;
 	int	 ii;
-	u8	 cb_idx;
-	int	 handlers;
 	int	 ret = 0;
 	int	 reset_alt_ioc_active = 0;
 	int	 irq_allocated = 0;
@@ -2548,34 +2542,6 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 		mpt_get_manufacturing_pg_0(ioc);
 	}
 
-	/*
-	 * Call each currently registered protocol IOC reset handler
-	 * with post-reset indication.
-	 * NOTE: If we're doing _IOC_BRINGUP, there can be no
-	 * MptResetHandlers[] registered yet.
-	 */
-	if (hard_reset_done) {
-		rc = handlers = 0;
-		for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
-			if ((ret == 0) && MptResetHandlers[cb_idx]) {
-				dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-				    "Calling IOC post_reset handler #%d\n",
-				    ioc->name, cb_idx));
-				rc += mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
-				handlers++;
-			}
-
-			if (alt_ioc_ready && MptResetHandlers[cb_idx]) {
-				drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-				    "Calling IOC post_reset handler #%d\n",
-				    ioc->alt_ioc->name, cb_idx));
-				rc += mpt_signal_reset(cb_idx, ioc->alt_ioc, MPT_IOC_POST_RESET);
-				handlers++;
-			}
-		}
-		/* FIXME?  Examine results here? */
-	}
-
  out:
 	if ((ret != 0) && irq_allocated) {
 		free_irq(ioc->pci_irq, ioc);
@@ -3938,6 +3904,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 	int count = 0;
 	u32 diag1val = 0;
 	MpiFwHeader_t *cached_fw;	/* Pointer to FW */
+	u8	 cb_idx;
 
 	/* Clear any existing interrupts */
 	CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
@@ -3956,6 +3923,18 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 		else
 			mdelay(1);
 
+		/*
+		 * Call each currently registered protocol IOC reset handler
+		 * with pre-reset indication.
+		 * NOTE: If we're doing _IOC_BRINGUP, there can be no
+		 * MptResetHandlers[] registered yet.
+		 */
+		for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+			if (MptResetHandlers[cb_idx])
+				(*(MptResetHandlers[cb_idx]))(ioc,
+						MPT_IOC_PRE_RESET);
+		}
+
 		for (count = 0; count < 60; count ++) {
 			doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
 			doorbell &= MPI_IOC_STATE_MASK;
@@ -4052,25 +4031,15 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 		 * NOTE: If we're doing _IOC_BRINGUP, there can be no
 		 * MptResetHandlers[] registered yet.
 		 */
-		{
-			u8	 cb_idx;
-			int	 r = 0;
-
-			for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
-				if (MptResetHandlers[cb_idx]) {
-					dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-						"Calling IOC pre_reset handler #%d\n",
-						ioc->name, cb_idx));
-					r += mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
-					if (ioc->alt_ioc) {
-						dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-							"Calling alt-%s pre_reset handler #%d\n",
-							ioc->name, ioc->alt_ioc->name, cb_idx));
-						r += mpt_signal_reset(cb_idx, ioc->alt_ioc, MPT_IOC_PRE_RESET);
-					}
+		for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+			if (MptResetHandlers[cb_idx]) {
+				mpt_signal_reset(cb_idx,
+					ioc, MPT_IOC_PRE_RESET);
+				if (ioc->alt_ioc) {
+					mpt_signal_reset(cb_idx,
+					ioc->alt_ioc, MPT_IOC_PRE_RESET);
 				}
 			}
-			/* FIXME?  Examine results here? */
 		}
 
 		if (ioc->cached_fw)
@@ -6956,7 +6925,7 @@ EXPORT_SYMBOL(mpt_halt_firmware);
 int
 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 {
-	int		 rc;
+	int	 rc;
 	u8	 cb_idx;
 	unsigned long	 flags;
 	unsigned long	 time_count;
@@ -6982,8 +6951,6 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 		ioc->alt_ioc->ioc_reset_in_progress = 1;
 	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
-	/* FIXME: If do_ioc_recovery fails, repeat....
-	 */
 
 	/* The SCSI driver needs to adjust timeouts on all current
 	 * commands prior to the diagnostic reset being issued.
@@ -7020,6 +6987,15 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 	}
 	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
+	for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+		if (MptResetHandlers[cb_idx]) {
+			mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
+			if (ioc->alt_ioc)
+				mpt_signal_reset(cb_idx,
+					ioc->alt_ioc, MPT_IOC_POST_RESET);
+		}
+	}
+
 	dtmprintk(ioc,
 	    printk(MYIOC_s_DEBUG_FMT
 		"HardResetHandler: completed (%d seconds): %s\n", ioc->name,
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 1c8514dc31ca..8dd4d219e433 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2008 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.04.10"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.09"
+#define MPT_LINUX_VERSION_COMMON	"3.04.12"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.12"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
@@ -157,8 +157,9 @@
 /*
  *	Try to keep these at 2^N-1
  */
-#define MPT_FC_CAN_QUEUE	127
+#define MPT_FC_CAN_QUEUE	1024
 #define MPT_SCSI_CAN_QUEUE	127
+#define MPT_SAS_CAN_QUEUE	127
 
 /*
  * Set the MAX_SGE value based on user input.
@@ -879,23 +880,9 @@ typedef enum {
 
 typedef struct _MPT_SCSI_HOST {
 	MPT_ADAPTER		 *ioc;
-	int			  port;
-	u32			  pad0;
-	MPT_LOCAL_REPLY		 *pLocal;		/* used for internal commands */
-	struct timer_list	  timer;
-		/* Pool of memory for holding SCpnts before doing
-		 * OS callbacks. freeQ is the free pool.
-		 */
-	u8			  negoNvram;		/* DV disabled, nego NVRAM */
-	u8			  pad1;
-	u8			  rsvd[2];
-	MPT_FRAME_HDR		 *cmdPtr;		/* Ptr to nonOS request */
-	struct scsi_cmnd	 *abortSCpnt;
-	MPT_LOCAL_REPLY		  localReply;		/* internal cmd reply struct */
 	ushort			  sel_timeout[MPT_MAX_FC_DEVICES];
 	char 			  *info_kbuf;
 	long			  last_queue_full;
-	u16			  tm_iocstatus;
 	u16			  spi_pending;
 	struct list_head	  target_reset_list;
 } MPT_SCSI_HOST;
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index e61df133a59e..ebf6ae024da4 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -1288,25 +1288,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n",
 		 ioc->name, ioc->ScsiLookup));
 
-	/* Clear the TM flags
-	 */
-	hd->abortSCpnt = NULL;
-
-	/* Clear the pointer used to store
-	 * single-threaded commands, i.e., those
-	 * issued during a bus scan, dv and
-	 * configuration pages.
-	 */
-	hd->cmdPtr = NULL;
-
-	/* Initialize this SCSI Hosts' timers
-	 * To use, set the timer expires field
-	 * and add_timer
-	 */
-	init_timer(&hd->timer);
-	hd->timer.data = (unsigned long) hd;
-	hd->timer.function = mptscsih_timer_expired;
-
 	hd->last_queue_full = 0;
 
 	sh->transportt = mptfc_transport_template;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 55ff25244af4..83873e3d0ce7 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -72,6 +72,7 @@
  */
 #define MPTSAS_RAID_CHANNEL	1
 
+#define SAS_CONFIG_PAGE_TIMEOUT		30
 MODULE_AUTHOR(MODULEAUTHOR);
 MODULE_DESCRIPTION(my_NAME);
 MODULE_LICENSE("GPL");
@@ -324,7 +325,6 @@ mptsas_cleanup_fw_event_q(MPT_ADAPTER *ioc)
 {
 	struct fw_event_work *fw_event, *next;
 	struct mptsas_target_reset_event *target_reset_list, *n;
-	u8	flush_q;
 	MPT_SCSI_HOST	*hd = shost_priv(ioc->sh);
 
 	/* flush the target_reset_list */
@@ -344,15 +344,10 @@ mptsas_cleanup_fw_event_q(MPT_ADAPTER *ioc)
 	     !ioc->fw_event_q || in_interrupt())
 		return;
 
-	flush_q = 0;
 	list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) {
 		if (cancel_delayed_work(&fw_event->work))
 			mptsas_free_fw_event(ioc, fw_event);
-		else
-			flush_q = 1;
 	}
-	if (flush_q)
-		flush_workqueue(ioc->fw_event_q);
 }
 
 
@@ -661,7 +656,7 @@ mptsas_add_device_component_starget_ir(MPT_ADAPTER *ioc,
 	cfg.pageAddr = starget->id;
 	cfg.cfghdr.hdr = &hdr;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
-	cfg.timeout = 10;
+	cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT;
 
 	if (mpt_config(ioc, &cfg) != 0)
 		goto out;
@@ -851,7 +846,13 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 		port_details->num_phys--;
 		port_details->phy_bitmask &= ~ (1 << phy_info->phy_id);
 		memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
-		sas_port_delete_phy(port_details->port, phy_info->phy);
+		if (phy_info->phy) {
+			devtprintk(ioc, dev_printk(KERN_DEBUG,
+				&phy_info->phy->dev, MYIOC_s_FMT
+				"delete phy %d, phy-obj (0x%p)\n", ioc->name,
+				phy_info->phy_id, phy_info->phy));
+			sas_port_delete_phy(port_details->port, phy_info->phy);
+		}
 		phy_info->port_details = NULL;
 	}
 
@@ -1272,7 +1273,6 @@ mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 		}
 		mptsas_cleanup_fw_event_q(ioc);
 		mptsas_queue_rescan(ioc);
-		mptsas_fw_event_on(ioc);
 		break;
 	default:
 		break;
@@ -1318,7 +1318,7 @@ mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
 	cfg.pageAddr = form + form_specific;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 	cfg.dir = 0;	/* read */
-	cfg.timeout = 10;
+	cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT;
 
 	error = mpt_config(ioc, &cfg);
 	if (error)
@@ -1592,6 +1592,7 @@ mptsas_firmware_event_work(struct work_struct *work)
 		mptsas_scan_sas_topology(ioc);
 		ioc->in_rescan = 0;
 		mptsas_free_fw_event(ioc, fw_event);
+		mptsas_fw_event_on(ioc);
 		return;
 	}
 
@@ -1891,7 +1892,7 @@ static struct scsi_host_template mptsas_driver_template = {
 	.eh_bus_reset_handler		= mptscsih_bus_reset,
 	.eh_host_reset_handler		= mptscsih_host_reset,
 	.bios_param			= mptscsih_bios_param,
-	.can_queue			= MPT_FC_CAN_QUEUE,
+	.can_queue			= MPT_SAS_CAN_QUEUE,
 	.this_id			= -1,
 	.sg_tablesize			= MPT_SCSI_SG_DEPTH,
 	.max_sectors			= 8192,
@@ -1926,7 +1927,7 @@ static int mptsas_get_linkerrors(struct sas_phy *phy)
 	cfg.pageAddr = phy->identify.phy_identifier;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 	cfg.dir = 0;    /* read */
-	cfg.timeout = 10;
+	cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT;
 
 	error = mpt_config(ioc, &cfg);
 	if (error)
@@ -2278,7 +2279,7 @@ mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 	cfg.pageAddr = 0;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 	cfg.dir = 0;	/* read */
-	cfg.timeout = 10;
+	cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT;
 
 	error = mpt_config(ioc, &cfg);
 	if (error)
@@ -2349,7 +2350,7 @@ mptsas_sas_io_unit_pg1(MPT_ADAPTER *ioc)
 
 	cfg.cfghdr.ehdr = &hdr;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
-	cfg.timeout = 10;
+	cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT;
 	cfg.cfghdr.ehdr->PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
 	cfg.cfghdr.ehdr->ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
 	cfg.cfghdr.ehdr->PageVersion = MPI_SASIOUNITPAGE1_PAGEVERSION;
@@ -2411,7 +2412,7 @@ mptsas_sas_phy_pg0(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 
 	cfg.cfghdr.ehdr = &hdr;
 	cfg.dir = 0;	/* read */
-	cfg.timeout = 10;
+	cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT;
 
 	/* Get Phy Pg 0 for each Phy. */
 	cfg.physAddr = -1;
@@ -2479,7 +2480,7 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
 	cfg.physAddr = -1;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 	cfg.dir = 0;	/* read */
-	cfg.timeout = 10;
+	cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT;
 
 	memset(device_info, 0, sizeof(struct mptsas_devinfo));
 	error = mpt_config(ioc, &cfg);
@@ -2554,7 +2555,7 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
 	cfg.pageAddr = form + form_specific;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 	cfg.dir = 0;	/* read */
-	cfg.timeout = 10;
+	cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT;
 
 	memset(port_info, 0, sizeof(struct mptsas_portinfo));
 	error = mpt_config(ioc, &cfg);
@@ -2635,7 +2636,7 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 	cfg.pageAddr = form + form_specific;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 	cfg.dir = 0;	/* read */
-	cfg.timeout = 10;
+	cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT;
 
 	error = mpt_config(ioc, &cfg);
 	if (error)
@@ -3307,6 +3308,7 @@ mptsas_send_expander_event(struct fw_event_work *fw_event)
 	expander_data = (MpiEventDataSasExpanderStatusChange_t *)
 	    fw_event->event_data;
 	memcpy(&sas_address, &expander_data->SASAddress, sizeof(__le64));
+	sas_address = le64_to_cpu(sas_address);
 	port_info = mptsas_find_portinfo_by_sas_address(ioc, sas_address);
 
 	if (expander_data->ReasonCode == MPI_EVENT_SAS_EXP_RC_ADDED) {
@@ -4760,10 +4762,9 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* set 16 byte cdb's */
 	sh->max_cmd_len = 16;
-
-	sh->max_id = ioc->pfacts[0].PortSCSIID;
+	sh->can_queue = min_t(int, ioc->req_depth - 10, sh->can_queue);
+	sh->max_id = -1;
 	sh->max_lun = max_lun;
-
 	sh->transportt = mptsas_transport_template;
 
 	/* Required entry.
@@ -4821,25 +4822,6 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n",
 		 ioc->name, ioc->ScsiLookup));
 
-	/* Clear the TM flags
-	 */
-	hd->abortSCpnt = NULL;
-
-	/* Clear the pointer used to store
-	 * single-threaded commands, i.e., those
-	 * issued during a bus scan, dv and
-	 * configuration pages.
-	 */
-	hd->cmdPtr = NULL;
-
-	/* Initialize this SCSI Hosts' timers
-	 * To use, set the timer expires field
-	 * and add_timer
-	 */
-	init_timer(&hd->timer);
-	hd->timer.data = (unsigned long) hd;
-	hd->timer.function = mptscsih_timer_expired;
-
 	ioc->sas_data.ptClear = mpt_pt_clear;
 
 	hd->last_queue_full = 0;
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 8440f78f6969..c29578614504 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -628,6 +628,16 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 		return 1;
 	}
 
+	if (ioc->bus_type == SAS) {
+		VirtDevice *vdevice = sc->device->hostdata;
+
+		if (!vdevice || !vdevice->vtarget ||
+		    vdevice->vtarget->deleted) {
+			sc->result = DID_NO_CONNECT << 16;
+			goto out;
+		}
+	}
+
 	sc->host_scribble = NULL;
 	sc->result = DID_OK << 16;		/* Set default reply as OK */
 	pScsiReq = (SCSIIORequest_t *) mf;
@@ -689,6 +699,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 
 		switch(status) {
 		case MPI_IOCSTATUS_BUSY:			/* 0x0002 */
+		case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:	/* 0x0006 */
 			/* CHECKME!
 			 * Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry)
 			 * But not: DID_BUS_BUSY lest one risk
@@ -872,7 +883,6 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 		case MPI_IOCSTATUS_INVALID_SGL:			/* 0x0003 */
 		case MPI_IOCSTATUS_INTERNAL_ERROR:		/* 0x0004 */
 		case MPI_IOCSTATUS_RESERVED:			/* 0x0005 */
-		case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:	/* 0x0006 */
 		case MPI_IOCSTATUS_INVALID_FIELD:		/* 0x0007 */
 		case MPI_IOCSTATUS_INVALID_STATE:		/* 0x0008 */
 		case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:		/* 0x0046 */
@@ -892,7 +902,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 #endif
 
 	} /* end of address reply case */
-
+out:
 	/* Unmap the DMA buffers, if any. */
 	scsi_dma_unmap(sc);
 
@@ -1729,9 +1739,6 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 	 */
 	mf = MPT_INDEX_2_MFPTR(ioc, scpnt_idx);
 	ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext;
-
-	hd->abortSCpnt = SCpnt;
-
 	retval = mptscsih_IssueTaskMgmt(hd,
 			 MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
 			 vdevice->vtarget->channel,
@@ -2293,7 +2300,10 @@ mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 		else
 			max_depth = MPT_SCSI_CMD_PER_DEV_LOW;
 	} else
-		max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
+		 max_depth = ioc->sh->can_queue;
+
+	if (!sdev->tagged_supported)
+		max_depth = 1;
 
 	if (qdepth > max_depth)
 		qdepth = max_depth;
@@ -2627,50 +2637,6 @@ mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
 	return 1;
 }
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*	mptscsih_timer_expired - Call back for timer process.
- *	Used only for dv functionality.
- *	@data: Pointer to MPT_SCSI_HOST recast as an unsigned long
- *
- */
-void
-mptscsih_timer_expired(unsigned long data)
-{
-	MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *) data;
-	MPT_ADAPTER 	*ioc = hd->ioc;
-
-	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Timer Expired! Cmd %p\n", ioc->name, hd->cmdPtr));
-
-	if (hd->cmdPtr) {
-		MPIHeader_t *cmd = (MPIHeader_t *)hd->cmdPtr;
-
-		if (cmd->Function == MPI_FUNCTION_SCSI_IO_REQUEST) {
-			/* Desire to issue a task management request here.
-			 * TM requests MUST be single threaded.
-			 * If old eh code and no TM current, issue request.
-			 * If new eh code, do nothing. Wait for OS cmd timeout
-			 *	for bus reset.
-			 */
-		} else {
-			/* Perform a FW reload */
-			if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0) {
-				printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", ioc->name);
-			}
-		}
-	} else {
-		/* This should NEVER happen */
-		printk(MYIOC_s_WARN_FMT "Null cmdPtr!!!!\n", ioc->name);
-	}
-
-	/* No more processing.
-	 * TM call will generate an interrupt for SCSI TM Management.
-	 * The FW will reply to all outstanding commands, callback will finish cleanup.
-	 * Hard reset clean-up will free all resources.
-	 */
-	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Timer Expired Complete!\n", ioc->name));
-
-	return;
-}
 
 /**
  *	mptscsih_get_completion_code -
@@ -3265,6 +3231,5 @@ EXPORT_SYMBOL(mptscsih_scandv_complete);
 EXPORT_SYMBOL(mptscsih_event_process);
 EXPORT_SYMBOL(mptscsih_ioc_reset);
 EXPORT_SYMBOL(mptscsih_change_queue_depth);
-EXPORT_SYMBOL(mptscsih_timer_expired);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index eb3f677528ac..e0b33e04a33b 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -129,7 +129,6 @@ extern int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRA
 extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
 extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
 extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
-extern void mptscsih_timer_expired(unsigned long data);
 extern u8 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id);
 extern int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id);
 extern struct device_attribute *mptscsih_host_attrs[];
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index c5b808fd55ba..69f4257419b5 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -1472,28 +1472,7 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n",
 		 ioc->name, ioc->ScsiLookup));
 
-	/* Clear the TM flags
-	 */
-	hd->abortSCpnt = NULL;
-
-	/* Clear the pointer used to store
-	 * single-threaded commands, i.e., those
-	 * issued during a bus scan, dv and
-	 * configuration pages.
-	 */
-	hd->cmdPtr = NULL;
-
-	/* Initialize this SCSI Hosts' timers
-	 * To use, set the timer expires field
-	 * and add_timer
-	 */
-	init_timer(&hd->timer);
-	hd->timer.data = (unsigned long) hd;
-	hd->timer.function = mptscsih_timer_expired;
-
 	ioc->spi_data.Saf_Te = mpt_saf_te;
-
-	hd->negoNvram = MPT_SCSICFG_USE_NVRAM;
 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		"saf_te %x\n",
 		ioc->name,