Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

6 files changed, 19 insertions, 19 deletions

diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile
index 95c9532cb07c..d182a24b3195 100644
--- a/drivers/message/fusion/Makefile
+++ b/drivers/message/fusion/Makefile
@@ -2,7 +2,7 @@
 
 # enable verbose logging
 # CONFIG_FUSION_LOGGING needs to be enabled in Kconfig
-#EXTRA_CFLAGS += -DMPT_DEBUG_VERBOSE
+#ccflags-y := -DMPT_DEBUG_VERBOSE
 
 
 #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
diff --git a/drivers/message/fusion/lsi/mpi_log_fc.h b/drivers/message/fusion/lsi/mpi_log_fc.h
index face6e7acc72..03be8b217709 100644
--- a/drivers/message/fusion/lsi/mpi_log_fc.h
+++ b/drivers/message/fusion/lsi/mpi_log_fc.h
@@ -38,8 +38,8 @@ typedef enum _MpiIocLogInfoFc
 {
     MPI_IOCLOGINFO_FC_INIT_BASE                     = 0x20000000,
     MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primitive */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primitive */
     MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN           = 0x20000004, /* Bad Rx Frame, overrun */
     MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER           = 0x20000005, /* Other errors caught by IOC which require retries */
     MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD       = 0x20000006, /* Main processor could not initialize sub-processor */
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index 8b04810df469..f62960b5d527 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -56,9 +56,9 @@
 #define IOP_LOGINFO_CODE_FWUPLOAD_NO_FLASH_AVAILABLE         (0x0003E000) /* Tried to upload from flash, but there is none */
 #define IOP_LOGINFO_CODE_FWUPLOAD_UNKNOWN_IMAGE_TYPE         (0x0003E001) /* ImageType field contents were invalid */
 #define IOP_LOGINFO_CODE_FWUPLOAD_WRONG_IMAGE_SIZE           (0x0003E002) /* ImageSize field in TCSGE was bad/offset in MfgPg 4 was wrong */
-#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occured while attempting to upload the entire flash */
-#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED       (0x0003E004) /* Error occured while attempting to upload single flash region */
-#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE                (0x0003E005) /* Problem occured while DMAing FW to host memory */
+#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occurred while attempting to upload the entire flash */
+#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED       (0x0003E004) /* Error occurred while attempting to upload single flash region */
+#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE                (0x0003E005) /* Problem occurred while DMAing FW to host memory */
 
 #define IOP_LOGINFO_CODE_DIAG_MSG_ERROR                      (0x00040000) /* Error handling diag msg - or'd with diag status */
 
@@ -187,8 +187,8 @@
 #define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD   (0x00005000)
 
 #define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE          (0x00200000) /* Can't get SMP Frame */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR             (0x00200010) /* Error occured on SMP Read */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR            (0x00200020) /* Error occured on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR             (0x00200010) /* Error occurred on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR            (0x00200020) /* Error occurred on SMP Write */
 #define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL      (0x00200040) /* Encl Mgmt services not available for this WWID */
 #define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED    (0x00200050) /* Address Mode not suppored */
 #define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM               (0x00200060) /* Invalid Slot Number in SEP Msg */
@@ -207,8 +207,8 @@
 #define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE           (0x00200103) /* SEP NACK'd, it is busy */
 #define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK                (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
 #define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM              (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
-#define PL_LOGINFO_DA_SEP_STOP_ON_DATA                       (0x00200106) /* SEP stopped while transfering data */
-#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA                 (0x00200107) /* SEP stopped while transfering sense data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_DATA                       (0x00200106) /* SEP stopped while transferring data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA                 (0x00200107) /* SEP stopped while transferring sense data */
 #define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1          (0x00200108) /* SEP returned unknown scsi status */
 #define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2          (0x00200109) /* SEP returned unknown scsi status */
 #define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP            (0x0020010A) /* SEP returned bad chksum after STOP */
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index ec8080c98081..fa15e853d4e8 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -3435,7 +3435,7 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
  *	If memory has already been allocated, the same (cached) value
  *	is returned.
  *
- *	Return 0 if successfull, or non-zero for failure
+ *	Return 0 if successful, or non-zero for failure
  **/
 int
 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
@@ -6932,7 +6932,7 @@ EXPORT_SYMBOL(mpt_halt_firmware);
  *	Message Unit Reset - instructs the IOC to reset the Reply Post and
  *	Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
  *	All posted buffers are freed, and event notification is turned off.
- *	IOC doesnt reply to any outstanding request. This will transfer IOC
+ *	IOC doesn't reply to any outstanding request. This will transfer IOC
  *	to READY state.
  **/
 int
@@ -7905,7 +7905,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
 		    "Owner", 					/* 15h */
 		"Open Transmit DMA Abort",			/* 16h */
 		"IO Device Missing Delay Retry",		/* 17h */
-		"IO Cancelled Due to Recieve Error",		/* 18h */
+		"IO Cancelled Due to Receive Error",		/* 18h */
 		NULL,						/* 19h */
 		NULL,						/* 1Ah */
 		NULL,						/* 1Bh */
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 878bda0cce70..6e6e16aab9da 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -985,7 +985,7 @@ retry_wait:
 	ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply;
 	iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK;
 	if (iocstat == MPI_IOCSTATUS_SUCCESS) {
-		printk(MYIOC_s_INFO_FMT "F/W update successfull!\n", iocp->name);
+		printk(MYIOC_s_INFO_FMT "F/W update successful!\n", iocp->name);
 		return 0;
 	} else if (iocstat == MPI_IOCSTATUS_INVALID_FUNCTION) {
 		printk(MYIOC_s_WARN_FMT "Hmmm...  F/W download not supported!?!\n",
@@ -2407,7 +2407,7 @@ done_free_mem:
 	}
 
 	/* mf is null if command issued successfully
-	 * otherwise, failure occured after mf acquired.
+	 * otherwise, failure occurred after mf acquired.
 	 */
 	if (mf)
 		mpt_free_msg_frame(ioc, mf);
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index f5a14afad2cd..66f94125de4e 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -307,7 +307,7 @@ mptsas_requeue_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
 	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 }
 
-/* free memory assoicated to a sas firmware event */
+/* free memory associated to a sas firmware event */
 static void
 mptsas_free_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event)
 {
@@ -1094,7 +1094,7 @@ mptsas_block_io_starget(struct scsi_target *starget)
 /**
  * mptsas_target_reset_queue
  *
- * Receive request for TARGET_RESET after recieving an firmware
+ * Receive request for TARGET_RESET after receiving an firmware
  * event NOT_RESPONDING_EVENT, then put command in link list
  * and queue if task_queue already in use.
  *
@@ -1403,7 +1403,7 @@ mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
 /**
  *	mptsas_add_end_device - report a new end device to sas transport layer
  *	@ioc: Pointer to MPT_ADAPTER structure
- *	@phy_info: decribes attached device
+ *	@phy_info: describes attached device
  *
  *	return (0) success (1) failure
  *
@@ -1481,7 +1481,7 @@ mptsas_add_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
 /**
  *	mptsas_del_end_device - report a deleted end device to sas transport layer
  *	@ioc: Pointer to MPT_ADAPTER structure
- *	@phy_info: decribes attached device
+ *	@phy_info: describes attached device
  *
  **/
 static void