Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...

1 files changed, 2 insertions, 70 deletions

diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c
index 978e8e3abc5c..110c03627051 100644
--- a/drivers/memory/mvebu-devbus.c
+++ b/drivers/memory/mvebu-devbus.c
@@ -44,14 +44,6 @@
 #define READ_PARAM_OFFSET	0x0
 #define WRITE_PARAM_OFFSET	0x4
 
-static const char * const devbus_wins[] = {
-	"devbus-boot",
-	"devbus-cs0",
-	"devbus-cs1",
-	"devbus-cs2",
-	"devbus-cs3",
-};
-
 struct devbus_read_params {
 	u32 bus_width;
 	u32 badr_skew;
@@ -208,16 +200,11 @@ static int mvebu_devbus_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *node = pdev->dev.of_node;
-	struct device_node *parent;
 	struct devbus *devbus;
 	struct resource *res;
 	struct clk *clk;
 	unsigned long rate;
-	const __be32 *ranges;
-	int err, cs;
-	int addr_cells, p_addr_cells, size_cells;
-	int ranges_len, tuple_len;
-	u32 base, size;
+	int err;
 
 	devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL);
 	if (!devbus)
@@ -248,68 +235,13 @@ static int mvebu_devbus_probe(struct platform_device *pdev)
 		return err;
 
 	/*
-	 * Allocate an address window for this device.
-	 * If the device probing fails, then we won't be able to
-	 * remove the allocated address decoding window.
-	 *
-	 * FIXME: This is only a temporary hack! We need to do this here
-	 * because we still don't have device tree bindings for mbus.
-	 * Once that support is added, we will declare these address windows
-	 * statically in the device tree, and remove the window configuration
-	 * from here.
-	 */
-
-	/*
-	 * Get the CS to choose the window string.
-	 * This is a bit hacky, but it will be removed once the
-	 * address windows are declared in the device tree.
-	 */
-	cs = (((unsigned long)devbus->base) % 0x400) / 8;
-
-	/*
-	 * Parse 'ranges' property to obtain a (base,size) window tuple.
-	 * This will be removed once the address windows
-	 * are declared in the device tree.
-	 */
-	parent = of_get_parent(node);
-	if (!parent)
-		return -EINVAL;
-
-	p_addr_cells = of_n_addr_cells(parent);
-	of_node_put(parent);
-
-	addr_cells = of_n_addr_cells(node);
-	size_cells = of_n_size_cells(node);
-	tuple_len = (p_addr_cells + addr_cells + size_cells) * sizeof(__be32);
-
-	ranges = of_get_property(node, "ranges", &ranges_len);
-	if (ranges == NULL || ranges_len != tuple_len)
-		return -EINVAL;
-
-	base = of_translate_address(node, ranges + addr_cells);
-	if (base == OF_BAD_ADDR)
-		return -EINVAL;
-	size = of_read_number(ranges + addr_cells + p_addr_cells, size_cells);
-
-	/*
-	 * Create an mbus address windows.
-	 * FIXME: Remove this, together with the above code, once the
-	 * address windows are declared in the device tree.
-	 */
-	err = mvebu_mbus_add_window(devbus_wins[cs], base, size);
-	if (err < 0)
-		return err;
-
-	/*
 	 * We need to create a child device explicitly from here to
 	 * guarantee that the child will be probed after the timing
 	 * parameters for the bus are written.
 	 */
 	err = of_platform_populate(node, NULL, NULL, dev);
-	if (err < 0) {
-		mvebu_mbus_del_window(base, size);
+	if (err < 0)
 		return err;
-	}
 
 	return 0;
 }