[media] omap3isp: CCP2/CSI2 receivers

The OMAP3 ISP CCP2 and CSI2 receivers provide an interface to connect
serial MIPI sensors to the device.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: David Cohen <dacohen@gmail.com>
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com>
Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com>
Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Antti Koskipaa <akoskipa@gmail.com>
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: RaniSuneela <r-m@ti.com>
Signed-off-by: Atanas Filipov <afilipov@mm-sol.com>
Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com>
Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Dominic Curran <dcurran@ti.com>
Signed-off-by: Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi>
Signed-off-by: Pallavi Kulkarni <p-kulkarni@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 1173 insertions, 0 deletions

diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/video/omap3isp/ispccp2.c
new file mode 100644
index 000000000000..0efef2e78d93
--- /dev/null
+++ b/drivers/media/video/omap3isp/ispccp2.c
@@ -0,0 +1,1173 @@
+/*
+ * ispccp2.c
+ *
+ * TI OMAP3 ISP - CCP2 module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+#include "isp.h"
+#include "ispreg.h"
+#include "ispccp2.h"
+
+/* Number of LCX channels */
+#define CCP2_LCx_CHANS_NUM			3
+/* Max/Min size for CCP2 video port */
+#define ISPCCP2_DAT_START_MIN			0
+#define ISPCCP2_DAT_START_MAX			4095
+#define ISPCCP2_DAT_SIZE_MIN			0
+#define ISPCCP2_DAT_SIZE_MAX			4095
+#define ISPCCP2_VPCLK_FRACDIV			65536
+#define ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP	0x12
+#define ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP	0x16
+/* Max/Min size for CCP2 memory channel */
+#define ISPCCP2_LCM_HSIZE_COUNT_MIN		16
+#define ISPCCP2_LCM_HSIZE_COUNT_MAX		8191
+#define ISPCCP2_LCM_HSIZE_SKIP_MIN		0
+#define ISPCCP2_LCM_HSIZE_SKIP_MAX		8191
+#define ISPCCP2_LCM_VSIZE_MIN			1
+#define ISPCCP2_LCM_VSIZE_MAX			8191
+#define ISPCCP2_LCM_HWORDS_MIN			1
+#define ISPCCP2_LCM_HWORDS_MAX			4095
+#define ISPCCP2_LCM_CTRL_BURST_SIZE_32X		5
+#define ISPCCP2_LCM_CTRL_READ_THROTTLE_FULL	0
+#define ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10	2
+#define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8	2
+#define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10	3
+#define ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10	3
+#define ISPCCP2_LCM_CTRL_DST_PORT_VP		0
+#define ISPCCP2_LCM_CTRL_DST_PORT_MEM		1
+
+/* Set only the required bits */
+#define BIT_SET(var, shift, mask, val)			\
+	do {						\
+		var = ((var) & ~((mask) << (shift)))	\
+			| ((val) << (shift));		\
+	} while (0)
+
+/*
+ * ccp2_print_status - Print current CCP2 module register values.
+ */
+#define CCP2_PRINT_REGISTER(isp, name)\
+	dev_dbg(isp->dev, "###CCP2 " #name "=0x%08x\n", \
+		isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_##name))
+
+static void ccp2_print_status(struct isp_ccp2_device *ccp2)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+
+	dev_dbg(isp->dev, "-------------CCP2 Register dump-------------\n");
+
+	CCP2_PRINT_REGISTER(isp, SYSCONFIG);
+	CCP2_PRINT_REGISTER(isp, SYSSTATUS);
+	CCP2_PRINT_REGISTER(isp, LC01_IRQENABLE);
+	CCP2_PRINT_REGISTER(isp, LC01_IRQSTATUS);
+	CCP2_PRINT_REGISTER(isp, LC23_IRQENABLE);
+	CCP2_PRINT_REGISTER(isp, LC23_IRQSTATUS);
+	CCP2_PRINT_REGISTER(isp, LCM_IRQENABLE);
+	CCP2_PRINT_REGISTER(isp, LCM_IRQSTATUS);
+	CCP2_PRINT_REGISTER(isp, CTRL);
+	CCP2_PRINT_REGISTER(isp, LCx_CTRL(0));
+	CCP2_PRINT_REGISTER(isp, LCx_CODE(0));
+	CCP2_PRINT_REGISTER(isp, LCx_STAT_START(0));
+	CCP2_PRINT_REGISTER(isp, LCx_STAT_SIZE(0));
+	CCP2_PRINT_REGISTER(isp, LCx_SOF_ADDR(0));
+	CCP2_PRINT_REGISTER(isp, LCx_EOF_ADDR(0));
+	CCP2_PRINT_REGISTER(isp, LCx_DAT_START(0));
+	CCP2_PRINT_REGISTER(isp, LCx_DAT_SIZE(0));
+	CCP2_PRINT_REGISTER(isp, LCx_DAT_PING_ADDR(0));
+	CCP2_PRINT_REGISTER(isp, LCx_DAT_PONG_ADDR(0));
+	CCP2_PRINT_REGISTER(isp, LCx_DAT_OFST(0));
+	CCP2_PRINT_REGISTER(isp, LCM_CTRL);
+	CCP2_PRINT_REGISTER(isp, LCM_VSIZE);
+	CCP2_PRINT_REGISTER(isp, LCM_HSIZE);
+	CCP2_PRINT_REGISTER(isp, LCM_PREFETCH);
+	CCP2_PRINT_REGISTER(isp, LCM_SRC_ADDR);
+	CCP2_PRINT_REGISTER(isp, LCM_SRC_OFST);
+	CCP2_PRINT_REGISTER(isp, LCM_DST_ADDR);
+	CCP2_PRINT_REGISTER(isp, LCM_DST_OFST);
+
+	dev_dbg(isp->dev, "--------------------------------------------\n");
+}
+
+/*
+ * ccp2_reset - Reset the CCP2
+ * @ccp2: pointer to ISP CCP2 device
+ */
+static void ccp2_reset(struct isp_ccp2_device *ccp2)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	int i = 0;
+
+	/* Reset the CSI1/CCP2B and wait for reset to complete */
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG,
+		    ISPCCP2_SYSCONFIG_SOFT_RESET);
+	while (!(isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSSTATUS) &
+		 ISPCCP2_SYSSTATUS_RESET_DONE)) {
+		udelay(10);
+		if (i++ > 10) {  /* try read 10 times */
+			dev_warn(isp->dev,
+				"omap3_isp: timeout waiting for ccp2 reset\n");
+			break;
+		}
+	}
+}
+
+/*
+ * ccp2_pwr_cfg - Configure the power mode settings
+ * @ccp2: pointer to ISP CCP2 device
+ */
+static void ccp2_pwr_cfg(struct isp_ccp2_device *ccp2)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+
+	isp_reg_writel(isp, ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SMART |
+			((isp->revision == ISP_REVISION_15_0 && isp->autoidle) ?
+			  ISPCCP2_SYSCONFIG_AUTO_IDLE : 0),
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG);
+}
+
+/*
+ * ccp2_if_enable - Enable CCP2 interface.
+ * @ccp2: pointer to ISP CCP2 device
+ * @enable: enable/disable flag
+ */
+static void ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
+	int i;
+
+	/* Enable/Disable all the LCx channels */
+	for (i = 0; i < CCP2_LCx_CHANS_NUM; i++)
+		isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(i),
+				ISPCCP2_LCx_CTRL_CHAN_EN,
+				enable ? ISPCCP2_LCx_CTRL_CHAN_EN : 0);
+
+	/* Enable/Disable ccp2 interface in ccp2 mode */
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
+			ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN,
+			enable ? (ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN) : 0);
+
+	/* For frame count propagation */
+	if (pipe->do_propagation) {
+		/* We may want the Frame Start IRQ from LC0 */
+		if (enable)
+			isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2,
+				    ISPCCP2_LC01_IRQENABLE,
+				    ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ);
+		else
+			isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCP2,
+				    ISPCCP2_LC01_IRQENABLE,
+				    ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ);
+	}
+}
+
+/*
+ * ccp2_mem_enable - Enable CCP2 memory interface.
+ * @ccp2: pointer to ISP CCP2 device
+ * @enable: enable/disable flag
+ */
+static void ccp2_mem_enable(struct isp_ccp2_device *ccp2, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+
+	if (enable)
+		ccp2_if_enable(ccp2, 0);
+
+	/* Enable/Disable ccp2 interface in ccp2 mode */
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
+			ISPCCP2_CTRL_MODE, enable ? ISPCCP2_CTRL_MODE : 0);
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL,
+			ISPCCP2_LCM_CTRL_CHAN_EN,
+			enable ? ISPCCP2_LCM_CTRL_CHAN_EN : 0);
+}
+
+/*
+ * ccp2_phyif_config - Initialize CCP2 phy interface config
+ * @ccp2: Pointer to ISP CCP2 device
+ * @config: CCP2 platform data
+ *
+ * Configure the CCP2 physical interface module from platform data.
+ *
+ * Returns -EIO if strobe is chosen in CSI1 mode, or 0 on success.
+ */
+static int ccp2_phyif_config(struct isp_ccp2_device *ccp2,
+			     const struct isp_ccp2_platform_data *pdata)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	u32 val;
+
+	/* CCP2B mode */
+	val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL) |
+			    ISPCCP2_CTRL_IO_OUT_SEL | ISPCCP2_CTRL_MODE;
+	/* Data/strobe physical layer */
+	BIT_SET(val, ISPCCP2_CTRL_PHY_SEL_SHIFT, ISPCCP2_CTRL_PHY_SEL_MASK,
+		pdata->phy_layer);
+	BIT_SET(val, ISPCCP2_CTRL_INV_SHIFT, ISPCCP2_CTRL_INV_MASK,
+		pdata->strobe_clk_pol);
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
+
+	val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
+	if (!(val & ISPCCP2_CTRL_MODE)) {
+		if (pdata->ccp2_mode)
+			dev_warn(isp->dev, "OMAP3 CCP2 bus not available\n");
+		if (pdata->phy_layer == ISPCCP2_CTRL_PHY_SEL_STROBE)
+			/* Strobe mode requires CCP2 */
+			return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * ccp2_vp_config - Initialize CCP2 video port interface.
+ * @ccp2: Pointer to ISP CCP2 device
+ * @vpclk_div: Video port divisor
+ *
+ * Configure the CCP2 video port with the given clock divisor. The valid divisor
+ * values depend on the ISP revision:
+ *
+ * - revision 1.0 and 2.0	1 to 4
+ * - revision 15.0		1 to 65536
+ *
+ * The exact divisor value used might differ from the requested value, as ISP
+ * revision 15.0 represent the divisor by 65536 divided by an integer.
+ */
+static void ccp2_vp_config(struct isp_ccp2_device *ccp2,
+			   unsigned int vpclk_div)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	u32 val;
+
+	/* ISPCCP2_CTRL Video port */
+	val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
+	val |= ISPCCP2_CTRL_VP_ONLY_EN;	/* Disable the memory write port */
+
+	if (isp->revision == ISP_REVISION_15_0) {
+		vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 65536);
+		vpclk_div = min(ISPCCP2_VPCLK_FRACDIV / vpclk_div, 65535U);
+		BIT_SET(val, ISPCCP2_CTRL_VPCLK_DIV_SHIFT,
+			ISPCCP2_CTRL_VPCLK_DIV_MASK, vpclk_div);
+	} else {
+		vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 4);
+		BIT_SET(val, ISPCCP2_CTRL_VP_OUT_CTRL_SHIFT,
+			ISPCCP2_CTRL_VP_OUT_CTRL_MASK, vpclk_div - 1);
+	}
+
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
+}
+
+/*
+ * ccp2_lcx_config - Initialize CCP2 logical channel interface.
+ * @ccp2: Pointer to ISP CCP2 device
+ * @config: Pointer to ISP LCx config structure.
+ *
+ * This will analyze the parameters passed by the interface config
+ * and configure CSI1/CCP2 logical channel
+ *
+ */
+static void ccp2_lcx_config(struct isp_ccp2_device *ccp2,
+			    struct isp_interface_lcx_config *config)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	u32 val, format;
+
+	switch (config->format) {
+	case V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8:
+		format = ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP;
+		break;
+	case V4L2_MBUS_FMT_SGRBG10_1X10:
+	default:
+		format = ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP;	/* RAW10+VP */
+		break;
+	}
+	/* ISPCCP2_LCx_CTRL logical channel #0 */
+	val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0))
+			    | (ISPCCP2_LCx_CTRL_REGION_EN); /* Region */
+
+	if (isp->revision == ISP_REVISION_15_0) {
+		/* CRC */
+		BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT_15_0,
+			ISPCCP2_LCx_CTRL_CRC_MASK,
+			config->crc);
+		/* Format = RAW10+VP or RAW8+DPCM10+VP*/
+		BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT_15_0,
+			ISPCCP2_LCx_CTRL_FORMAT_MASK_15_0, format);
+	} else {
+		BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT,
+			ISPCCP2_LCx_CTRL_CRC_MASK,
+			config->crc);
+
+		BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT,
+			ISPCCP2_LCx_CTRL_FORMAT_MASK, format);
+	}
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0));
+
+	/* ISPCCP2_DAT_START for logical channel #0 */
+	isp_reg_writel(isp, config->data_start << ISPCCP2_LCx_DAT_SHIFT,
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_START(0));
+
+	/* ISPCCP2_DAT_SIZE for logical channel #0 */
+	isp_reg_writel(isp, config->data_size << ISPCCP2_LCx_DAT_SHIFT,
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_SIZE(0));
+
+	/* Enable error IRQs for logical channel #0 */
+	val = ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ |
+	      ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ |
+	      ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ |
+	      ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ |
+	      ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ |
+	      ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ |
+	      ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ;
+
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQSTATUS);
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQENABLE, val);
+}
+
+/*
+ * ccp2_if_configure - Configure ccp2 with data from sensor
+ * @ccp2: Pointer to ISP CCP2 device
+ *
+ * Return 0 on success or a negative error code
+ */
+static int ccp2_if_configure(struct isp_ccp2_device *ccp2)
+{
+	const struct isp_v4l2_subdevs_group *pdata;
+	struct v4l2_mbus_framefmt *format;
+	struct media_pad *pad;
+	struct v4l2_subdev *sensor;
+	u32 lines = 0;
+	int ret;
+
+	ccp2_pwr_cfg(ccp2);
+
+	pad = media_entity_remote_source(&ccp2->pads[CCP2_PAD_SINK]);
+	sensor = media_entity_to_v4l2_subdev(pad->entity);
+	pdata = sensor->host_priv;
+
+	ret = ccp2_phyif_config(ccp2, &pdata->bus.ccp2);
+	if (ret < 0)
+		return ret;
+
+	ccp2_vp_config(ccp2, pdata->bus.ccp2.vpclk_div + 1);
+
+	v4l2_subdev_call(sensor, sensor, g_skip_top_lines, &lines);
+
+	format = &ccp2->formats[CCP2_PAD_SINK];
+
+	ccp2->if_cfg.data_start = lines;
+	ccp2->if_cfg.crc = pdata->bus.ccp2.crc;
+	ccp2->if_cfg.format = format->code;
+	ccp2->if_cfg.data_size = format->height;
+
+	ccp2_lcx_config(ccp2, &ccp2->if_cfg);
+
+	return 0;
+}
+
+static int ccp2_adjust_bandwidth(struct isp_ccp2_device *ccp2)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
+	struct isp_device *isp = to_isp_device(ccp2);
+	const struct v4l2_mbus_framefmt *ofmt = &ccp2->formats[CCP2_PAD_SOURCE];
+	unsigned long l3_ick = pipe->l3_ick;
+	struct v4l2_fract *timeperframe;
+	unsigned int vpclk_div = 2;
+	unsigned int value;
+	u64 bound;
+	u64 area;
+
+	/* Compute the minimum clock divisor, based on the pipeline maximum
+	 * data rate. This is an absolute lower bound if we don't want SBL
+	 * overflows, so round the value up.
+	 */
+	vpclk_div = max_t(unsigned int, DIV_ROUND_UP(l3_ick, pipe->max_rate),
+			  vpclk_div);
+
+	/* Compute the maximum clock divisor, based on the requested frame rate.
+	 * This is a soft lower bound to achieve a frame rate equal or higher
+	 * than the requested value, so round the value down.
+	 */
+	timeperframe = &pipe->max_timeperframe;
+
+	if (timeperframe->numerator) {
+		area = ofmt->width * ofmt->height;
+		bound = div_u64(area * timeperframe->denominator,
+				timeperframe->numerator);
+		value = min_t(u64, bound, l3_ick);
+		vpclk_div = max_t(unsigned int, l3_ick / value, vpclk_div);
+	}
+
+	dev_dbg(isp->dev, "%s: minimum clock divisor = %u\n", __func__,
+		vpclk_div);
+
+	return vpclk_div;
+}
+
+/*
+ * ccp2_mem_configure - Initialize CCP2 memory input/output interface
+ * @ccp2: Pointer to ISP CCP2 device
+ * @config: Pointer to ISP mem interface config structure
+ *
+ * This will analyze the parameters passed by the interface config
+ * structure, and configure the respective registers for proper
+ * CSI1/CCP2 memory input.
+ */
+static void ccp2_mem_configure(struct isp_ccp2_device *ccp2,
+			       struct isp_interface_mem_config *config)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	u32 sink_pixcode = ccp2->formats[CCP2_PAD_SINK].code;
+	u32 source_pixcode = ccp2->formats[CCP2_PAD_SOURCE].code;
+	unsigned int dpcm_decompress = 0;
+	u32 val, hwords;
+
+	if (sink_pixcode != source_pixcode &&
+	    sink_pixcode == V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8)
+		dpcm_decompress = 1;
+
+	ccp2_pwr_cfg(ccp2);
+
+	/* Hsize, Skip */
+	isp_reg_writel(isp, ISPCCP2_LCM_HSIZE_SKIP_MIN |
+		       (config->hsize_count << ISPCCP2_LCM_HSIZE_SHIFT),
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_HSIZE);
+
+	/* Vsize, no. of lines */
+	isp_reg_writel(isp, config->vsize_count << ISPCCP2_LCM_VSIZE_SHIFT,
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_VSIZE);
+
+	if (ccp2->video_in.bpl_padding == 0)
+		config->src_ofst = 0;
+	else
+		config->src_ofst = ccp2->video_in.bpl_value;
+
+	isp_reg_writel(isp, config->src_ofst, OMAP3_ISP_IOMEM_CCP2,
+		       ISPCCP2_LCM_SRC_OFST);
+
+	/* Source and Destination formats */
+	val = ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10 <<
+	      ISPCCP2_LCM_CTRL_DST_FORMAT_SHIFT;
+
+	if (dpcm_decompress) {
+		/* source format is RAW8 */
+		val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8 <<
+		       ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT;
+
+		/* RAW8 + DPCM10 - simple predictor */
+		val |= ISPCCP2_LCM_CTRL_SRC_DPCM_PRED;
+
+		/* enable source DPCM decompression */
+		val |= ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10 <<
+		       ISPCCP2_LCM_CTRL_SRC_DECOMPR_SHIFT;
+	} else {
+		/* source format is RAW10 */
+		val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10 <<
+		       ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT;
+	}
+
+	/* Burst size to 32x64 */
+	val |= ISPCCP2_LCM_CTRL_BURST_SIZE_32X <<
+	       ISPCCP2_LCM_CTRL_BURST_SIZE_SHIFT;
+
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL);
+
+	/* Prefetch setup */
+	if (dpcm_decompress)
+		hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN +
+			  config->hsize_count) >> 3;
+	else
+		hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN +
+			  config->hsize_count) >> 2;
+
+	isp_reg_writel(isp, hwords << ISPCCP2_LCM_PREFETCH_SHIFT,
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_PREFETCH);
+
+	/* Video port */
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
+		    ISPCCP2_CTRL_IO_OUT_SEL | ISPCCP2_CTRL_MODE);
+	ccp2_vp_config(ccp2, ccp2_adjust_bandwidth(ccp2));
+
+	/* Clear LCM interrupts */
+	isp_reg_writel(isp, ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ |
+		       ISPCCP2_LCM_IRQSTATUS_EOF_IRQ,
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQSTATUS);
+
+	/* Enable LCM interupts */
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQENABLE,
+		    ISPCCP2_LCM_IRQSTATUS_EOF_IRQ |
+		    ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ);
+}
+
+/*
+ * ccp2_set_inaddr - Sets memory address of input frame.
+ * @ccp2: Pointer to ISP CCP2 device
+ * @addr: 32bit memory address aligned on 32byte boundary.
+ *
+ * Configures the memory address from which the input frame is to be read.
+ */
+static void ccp2_set_inaddr(struct isp_ccp2_device *ccp2, u32 addr)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+
+	isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_SRC_ADDR);
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt handling
+ */
+
+static void ccp2_isr_buffer(struct isp_ccp2_device *ccp2)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
+	struct isp_buffer *buffer;
+
+	buffer = omap3isp_video_buffer_next(&ccp2->video_in, ccp2->error);
+	if (buffer != NULL)
+		ccp2_set_inaddr(ccp2, buffer->isp_addr);
+
+	pipe->state |= ISP_PIPELINE_IDLE_INPUT;
+
+	if (ccp2->state == ISP_PIPELINE_STREAM_SINGLESHOT) {
+		if (isp_pipeline_ready(pipe))
+			omap3isp_pipeline_set_stream(pipe,
+						ISP_PIPELINE_STREAM_SINGLESHOT);
+	}
+
+	ccp2->error = 0;
+}
+
+/*
+ * omap3isp_ccp2_isr - Handle ISP CCP2 interrupts
+ * @ccp2: Pointer to ISP CCP2 device
+ *
+ * This will handle the CCP2 interrupts
+ *
+ * Returns -EIO in case of error, or 0 on success.
+ */
+int omap3isp_ccp2_isr(struct isp_ccp2_device *ccp2)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	int ret = 0;
+	static const u32 ISPCCP2_LC01_ERROR =
+		ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ |
+		ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ |
+		ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ |
+		ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ |
+		ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ |
+		ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ;
+	u32 lcx_irqstatus, lcm_irqstatus;
+
+	/* First clear the interrupts */
+	lcx_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2,
+				      ISPCCP2_LC01_IRQSTATUS);
+	isp_reg_writel(isp, lcx_irqstatus, OMAP3_ISP_IOMEM_CCP2,
+		       ISPCCP2_LC01_IRQSTATUS);
+
+	lcm_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2,
+				      ISPCCP2_LCM_IRQSTATUS);
+	isp_reg_writel(isp, lcm_irqstatus, OMAP3_ISP_IOMEM_CCP2,
+		       ISPCCP2_LCM_IRQSTATUS);
+	/* Errors */
+	if (lcx_irqstatus & ISPCCP2_LC01_ERROR) {
+		ccp2->error = 1;
+		dev_dbg(isp->dev, "CCP2 err:%x\n", lcx_irqstatus);
+		return -EIO;
+	}
+
+	if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ) {
+		ccp2->error = 1;
+		dev_dbg(isp->dev, "CCP2 OCP err:%x\n", lcm_irqstatus);
+		ret = -EIO;
+	}
+
+	if (omap3isp_module_sync_is_stopping(&ccp2->wait, &ccp2->stopping))
+		return 0;
+
+	/* Frame number propagation */
+	if (lcx_irqstatus & ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ) {
+		struct isp_pipeline *pipe =
+			to_isp_pipeline(&ccp2->subdev.entity);
+		if (pipe->do_propagation)
+			atomic_inc(&pipe->frame_number);
+	}
+
+	/* Handle queued buffers on frame end interrupts */
+	if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_EOF_IRQ)
+		ccp2_isr_buffer(ccp2);
+
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+static const unsigned int ccp2_fmts[] = {
+	V4L2_MBUS_FMT_SGRBG10_1X10,
+	V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8,
+};
+
+/*
+ * __ccp2_get_format - helper function for getting ccp2 format
+ * @ccp2  : Pointer to ISP CCP2 device
+ * @fh    : V4L2 subdev file handle
+ * @pad   : pad number
+ * @which : wanted subdev format
+ * return format structure or NULL on error
+ */
+static struct v4l2_mbus_framefmt *
+__ccp2_get_format(struct isp_ccp2_device *ccp2, struct v4l2_subdev_fh *fh,
+		     unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_format(fh, pad);
+	else
+		return &ccp2->formats[pad];
+}
+
+/*
+ * ccp2_try_format - Handle try format by pad subdev method
+ * @ccp2  : Pointer to ISP CCP2 device
+ * @fh    : V4L2 subdev file handle
+ * @pad   : pad num
+ * @fmt   : pointer to v4l2 mbus format structure
+ * @which : wanted subdev format
+ */
+static void ccp2_try_format(struct isp_ccp2_device *ccp2,
+			       struct v4l2_subdev_fh *fh, unsigned int pad,
+			       struct v4l2_mbus_framefmt *fmt,
+			       enum v4l2_subdev_format_whence which)
+{
+	struct v4l2_mbus_framefmt *format;
+
+	switch (pad) {
+	case CCP2_PAD_SINK:
+		if (fmt->code != V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8)
+			fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10;
+
+		if (ccp2->input == CCP2_INPUT_SENSOR) {
+			fmt->width = clamp_t(u32, fmt->width,
+					     ISPCCP2_DAT_START_MIN,
+					     ISPCCP2_DAT_START_MAX);
+			fmt->height = clamp_t(u32, fmt->height,
+					      ISPCCP2_DAT_SIZE_MIN,
+					      ISPCCP2_DAT_SIZE_MAX);
+		} else if (ccp2->input == CCP2_INPUT_MEMORY) {
+			fmt->width = clamp_t(u32, fmt->width,
+					     ISPCCP2_LCM_HSIZE_COUNT_MIN,
+					     ISPCCP2_LCM_HSIZE_COUNT_MAX);
+			fmt->height = clamp_t(u32, fmt->height,
+					      ISPCCP2_LCM_VSIZE_MIN,
+					      ISPCCP2_LCM_VSIZE_MAX);
+		}
+		break;
+
+	case CCP2_PAD_SOURCE:
+		/* Source format - copy sink format and change pixel code
+		 * to SGRBG10_1X10 as we don't support CCP2 write to memory.
+		 * When CCP2 write to memory feature will be added this
+		 * should be changed properly.
+		 */
+		format = __ccp2_get_format(ccp2, fh, CCP2_PAD_SINK, which);
+		memcpy(fmt, format, sizeof(*fmt));
+		fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10;
+		break;
+	}
+
+	fmt->field = V4L2_FIELD_NONE;
+	fmt->colorspace = V4L2_COLORSPACE_SRGB;
+}
+
+/*
+ * ccp2_enum_mbus_code - Handle pixel format enumeration
+ * @sd     : pointer to v4l2 subdev structure
+ * @fh     : V4L2 subdev file handle
+ * @code   : pointer to v4l2_subdev_mbus_code_enum structure
+ * return -EINVAL or zero on success
+ */
+static int ccp2_enum_mbus_code(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	if (code->pad == CCP2_PAD_SINK) {
+		if (code->index >= ARRAY_SIZE(ccp2_fmts))
+			return -EINVAL;
+
+		code->code = ccp2_fmts[code->index];
+	} else {
+		if (code->index != 0)
+			return -EINVAL;
+
+		format = __ccp2_get_format(ccp2, fh, CCP2_PAD_SINK,
+					      V4L2_SUBDEV_FORMAT_TRY);
+		code->code = format->code;
+	}
+
+	return 0;
+}
+
+static int ccp2_enum_frame_size(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_fh *fh,
+				   struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt format;
+
+	if (fse->index != 0)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = 1;
+	format.height = 1;
+	ccp2_try_format(ccp2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->min_width = format.width;
+	fse->min_height = format.height;
+
+	if (format.code != fse->code)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = -1;
+	format.height = -1;
+	ccp2_try_format(ccp2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->max_width = format.width;
+	fse->max_height = format.height;
+
+	return 0;
+}
+
+/*
+ * ccp2_get_format - Handle get format by pads subdev method
+ * @sd    : pointer to v4l2 subdev structure
+ * @fh    : V4L2 subdev file handle
+ * @fmt   : pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on sucess
+ */
+static int ccp2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_format *fmt)
+{
+	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	format = __ccp2_get_format(ccp2, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	fmt->format = *format;
+	return 0;
+}
+
+/*
+ * ccp2_set_format - Handle set format by pads subdev method
+ * @sd    : pointer to v4l2 subdev structure
+ * @fh    : V4L2 subdev file handle
+ * @fmt   : pointer to v4l2 subdev format structure
+ * returns zero
+ */
+static int ccp2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_format *fmt)
+{
+	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	format = __ccp2_get_format(ccp2, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	ccp2_try_format(ccp2, fh, fmt->pad, &fmt->format, fmt->which);
+	*format = fmt->format;
+
+	/* Propagate the format from sink to source */
+	if (fmt->pad == CCP2_PAD_SINK) {
+		format = __ccp2_get_format(ccp2, fh, CCP2_PAD_SOURCE,
+					   fmt->which);
+		*format = fmt->format;
+		ccp2_try_format(ccp2, fh, CCP2_PAD_SOURCE, format, fmt->which);
+	}
+
+	return 0;
+}
+
+/*
+ * ccp2_init_formats - Initialize formats on all pads
+ * @sd: ISP CCP2 V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values. If fh is not NULL, try
+ * formats are initialized on the file handle. Otherwise active formats are
+ * initialized on the device.
+ */
+static int ccp2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct v4l2_subdev_format format;
+
+	memset(&format, 0, sizeof(format));
+	format.pad = CCP2_PAD_SINK;
+	format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10;
+	format.format.width = 4096;
+	format.format.height = 4096;
+	ccp2_set_format(sd, fh, &format);
+
+	return 0;
+}
+
+/*
+ * ccp2_s_stream - Enable/Disable streaming on ccp2 subdev
+ * @sd    : pointer to v4l2 subdev structure
+ * @enable: 1 == Enable, 0 == Disable
+ * return zero
+ */
+static int ccp2_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
+	struct isp_device *isp = to_isp_device(ccp2);
+	struct device *dev = to_device(ccp2);
+	int ret;
+
+	if (ccp2->state == ISP_PIPELINE_STREAM_STOPPED) {
+		if (enable == ISP_PIPELINE_STREAM_STOPPED)
+			return 0;
+		atomic_set(&ccp2->stopping, 0);
+		ccp2->error = 0;
+	}
+
+	switch (enable) {
+	case ISP_PIPELINE_STREAM_CONTINUOUS:
+		if (ccp2->phy) {
+			ret = omap3isp_csiphy_acquire(ccp2->phy);
+			if (ret < 0)
+				return ret;
+		}
+
+		ccp2_if_configure(ccp2);
+		ccp2_print_status(ccp2);
+
+		/* Enable CSI1/CCP2 interface */
+		ccp2_if_enable(ccp2, 1);
+		break;
+
+	case ISP_PIPELINE_STREAM_SINGLESHOT:
+		if (ccp2->state != ISP_PIPELINE_STREAM_SINGLESHOT) {
+			struct v4l2_mbus_framefmt *format;
+
+			format = &ccp2->formats[CCP2_PAD_SINK];
+
+			ccp2->mem_cfg.hsize_count = format->width;
+			ccp2->mem_cfg.vsize_count = format->height;
+			ccp2->mem_cfg.src_ofst = 0;
+
+			ccp2_mem_configure(ccp2, &ccp2->mem_cfg);
+			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI1_READ);
+			ccp2_print_status(ccp2);
+		}
+		ccp2_mem_enable(ccp2, 1);
+		break;
+
+	case ISP_PIPELINE_STREAM_STOPPED:
+		if (omap3isp_module_sync_idle(&sd->entity, &ccp2->wait,
+					      &ccp2->stopping))
+			dev_dbg(dev, "%s: module stop timeout.\n", sd->name);
+		if (ccp2->input == CCP2_INPUT_MEMORY) {
+			ccp2_mem_enable(ccp2, 0);
+			omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI1_READ);
+		} else if (ccp2->input == CCP2_INPUT_SENSOR) {
+			/* Disable CSI1/CCP2 interface */
+			ccp2_if_enable(ccp2, 0);
+			if (ccp2->phy)
+				omap3isp_csiphy_release(ccp2->phy);
+		}
+		break;
+	}
+
+	ccp2->state = enable;
+	return 0;
+}
+
+/* subdev video operations */
+static const struct v4l2_subdev_video_ops ccp2_sd_video_ops = {
+	.s_stream = ccp2_s_stream,
+};
+
+/* subdev pad operations */
+static const struct v4l2_subdev_pad_ops ccp2_sd_pad_ops = {
+	.enum_mbus_code = ccp2_enum_mbus_code,
+	.enum_frame_size = ccp2_enum_frame_size,
+	.get_fmt = ccp2_get_format,
+	.set_fmt = ccp2_set_format,
+};
+
+/* subdev operations */
+static const struct v4l2_subdev_ops ccp2_sd_ops = {
+	.video = &ccp2_sd_video_ops,
+	.pad = &ccp2_sd_pad_ops,
+};
+
+/* subdev internal operations */
+static const struct v4l2_subdev_internal_ops ccp2_sd_internal_ops = {
+	.open = ccp2_init_formats,
+};
+
+/* --------------------------------------------------------------------------
+ * ISP ccp2 video device node
+ */
+
+/*
+ * ccp2_video_queue - Queue video buffer.
+ * @video : Pointer to isp video structure
+ * @buffer: Pointer to isp_buffer structure
+ * return -EIO or zero on success
+ */
+static int ccp2_video_queue(struct isp_video *video, struct isp_buffer *buffer)
+{
+	struct isp_ccp2_device *ccp2 = &video->isp->isp_ccp2;
+
+	ccp2_set_inaddr(ccp2, buffer->isp_addr);
+	return 0;
+}
+
+static const struct isp_video_operations ccp2_video_ops = {
+	.queue = ccp2_video_queue,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media entity operations
+ */
+
+/*
+ * ccp2_link_setup - Setup ccp2 connections.
+ * @entity : Pointer to media entity structure
+ * @local  : Pointer to local pad array
+ * @remote : Pointer to remote pad array
+ * @flags  : Link flags
+ * return -EINVAL on error or zero on success
+ */
+static int ccp2_link_setup(struct media_entity *entity,
+			   const struct media_pad *local,
+			   const struct media_pad *remote, u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
+
+	switch (local->index | media_entity_type(remote->entity)) {
+	case CCP2_PAD_SINK | MEDIA_ENT_T_DEVNODE:
+		/* read from memory */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (ccp2->input == CCP2_INPUT_SENSOR)
+				return -EBUSY;
+			ccp2->input = CCP2_INPUT_MEMORY;
+		} else {
+			if (ccp2->input == CCP2_INPUT_MEMORY)
+				ccp2->input = CCP2_INPUT_NONE;
+		}
+		break;
+
+	case CCP2_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV:
+		/* read from sensor/phy */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (ccp2->input == CCP2_INPUT_MEMORY)
+				return -EBUSY;
+			ccp2->input = CCP2_INPUT_SENSOR;
+		} else {
+			if (ccp2->input == CCP2_INPUT_SENSOR)
+				ccp2->input = CCP2_INPUT_NONE;
+		} break;
+
+	case CCP2_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV:
+		/* write to video port/ccdc */
+		if (flags & MEDIA_LNK_FL_ENABLED)
+			ccp2->output = CCP2_OUTPUT_CCDC;
+		else
+			ccp2->output = CCP2_OUTPUT_NONE;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* media operations */
+static const struct media_entity_operations ccp2_media_ops = {
+	.link_setup = ccp2_link_setup,
+};
+
+/*
+ * ccp2_init_entities - Initialize ccp2 subdev and media entity.
+ * @ccp2: Pointer to ISP CCP2 device
+ * return negative error code or zero on success
+ */
+static int ccp2_init_entities(struct isp_ccp2_device *ccp2)
+{
+	struct v4l2_subdev *sd = &ccp2->subdev;
+	struct media_pad *pads = ccp2->pads;
+	struct media_entity *me = &sd->entity;
+	int ret;
+
+	ccp2->input = CCP2_INPUT_NONE;
+	ccp2->output = CCP2_OUTPUT_NONE;
+
+	v4l2_subdev_init(sd, &ccp2_sd_ops);
+	sd->internal_ops = &ccp2_sd_internal_ops;
+	strlcpy(sd->name, "OMAP3 ISP CCP2", sizeof(sd->name));
+	sd->grp_id = 1 << 16;   /* group ID for isp subdevs */
+	v4l2_set_subdevdata(sd, ccp2);
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	pads[CCP2_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+	pads[CCP2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+
+	me->ops = &ccp2_media_ops;
+	ret = media_entity_init(me, CCP2_PADS_NUM, pads, 0);
+	if (ret < 0)
+		return ret;
+
+	ccp2_init_formats(sd, NULL);
+
+	/*
+	 * The CCP2 has weird line alignment requirements, possibly caused by
+	 * DPCM8 decompression. Line length for data read from memory must be a
+	 * multiple of 128 bits (16 bytes) in continuous mode (when no padding
+	 * is present at end of lines). Additionally, if padding is used, the
+	 * padded line length must be a multiple of 32 bytes. To simplify the
+	 * implementation we use a fixed 32 bytes alignment regardless of the
+	 * input format and width. If strict 128 bits alignment support is
+	 * required ispvideo will need to be made aware of this special dual
+	 * alignement requirements.
+	 */
+	ccp2->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	ccp2->video_in.bpl_alignment = 32;
+	ccp2->video_in.bpl_max = 0xffffffe0;
+	ccp2->video_in.isp = to_isp_device(ccp2);
+	ccp2->video_in.ops = &ccp2_video_ops;
+	ccp2->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 3;
+
+	ret = omap3isp_video_init(&ccp2->video_in, "CCP2");
+	if (ret < 0)
+		return ret;
+
+	/* Connect the video node to the ccp2 subdev. */
+	ret = media_entity_create_link(&ccp2->video_in.video.entity, 0,
+				       &ccp2->subdev.entity, CCP2_PAD_SINK, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * omap3isp_ccp2_unregister_entities - Unregister media entities: subdev
+ * @ccp2: Pointer to ISP CCP2 device
+ */
+void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2)
+{
+	media_entity_cleanup(&ccp2->subdev.entity);
+
+	v4l2_device_unregister_subdev(&ccp2->subdev);
+	omap3isp_video_unregister(&ccp2->video_in);
+}
+
+/*
+ * omap3isp_ccp2_register_entities - Register the subdev media entity
+ * @ccp2: Pointer to ISP CCP2 device
+ * @vdev: Pointer to v4l device
+ * return negative error code or zero on success
+ */
+
+int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2,
+				    struct v4l2_device *vdev)
+{
+	int ret;
+
+	/* Register the subdev and video nodes. */
+	ret = v4l2_device_register_subdev(vdev, &ccp2->subdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&ccp2->video_in, vdev);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	omap3isp_ccp2_unregister_entities(ccp2);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP ccp2 initialisation and cleanup
+ */
+
+/*
+ * omap3isp_ccp2_cleanup - CCP2 un-initialization
+ * @isp : Pointer to ISP device
+ */
+void omap3isp_ccp2_cleanup(struct isp_device *isp)
+{
+}
+
+/*
+ * omap3isp_ccp2_init - CCP2 initialization.
+ * @isp : Pointer to ISP device
+ * return negative error code or zero on success
+ */
+int omap3isp_ccp2_init(struct isp_device *isp)
+{
+	struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
+	int ret;
+
+	init_waitqueue_head(&ccp2->wait);
+
+	/* On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with
+	 * the CSI2c or CSI2a receivers. The PHY then needs to be explicitly
+	 * configured.
+	 *
+	 * TODO: Don't hardcode the usage of PHY1 (shared with CSI2c).
+	 */
+	if (isp->revision == ISP_REVISION_15_0)
+		ccp2->phy = &isp->isp_csiphy1;
+
+	ret = ccp2_init_entities(ccp2);
+	if (ret < 0)
+		goto out;
+
+	ccp2_reset(ccp2);
+out:
+	if (ret)
+		omap3isp_ccp2_cleanup(isp);
+
+	return ret;
+}