V4L/DVB: ir: use IR_KEYTABLE where an IR table is needed

Replaces most of the occurences of IR keytables on V4L drivers by a macro
that evaluates to provide the name of the exported symbol.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 17 insertions, 17 deletions

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 7b0ca583de55..29201438b45f 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -602,7 +602,7 @@ struct em28xx_board em28xx_boards[] = {
 		.name         = "Gadmei UTV330+",
 		.tuner_type   = TUNER_TNF_5335MF,
 		.tda9887_conf = TDA9887_PRESENT,
-		.ir_codes     = &ir_codes_gadmei_rm008z_table,
+		.ir_codes     = &IR_KEYTABLE(gadmei_rm008z),
 		.decoder      = EM28XX_SAA711X,
 		.xclk         = EM28XX_XCLK_FREQUENCY_12MHZ,
 		.input        = { {
@@ -791,7 +791,7 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware = 1,
 		.has_dvb      = 1,
 		.dvb_gpio     = hauppauge_wintv_hvr_900_digital,
-		.ir_codes     = &ir_codes_hauppauge_new_table,
+		.ir_codes     = &IR_KEYTABLE(hauppauge_new),
 		.decoder      = EM28XX_TVP5150,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -816,7 +816,7 @@ struct em28xx_board em28xx_boards[] = {
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
 		.mts_firmware = 1,
-		.ir_codes     = &ir_codes_hauppauge_new_table,
+		.ir_codes     = &IR_KEYTABLE(hauppauge_new),
 		.decoder      = EM28XX_TVP5150,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -842,7 +842,7 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware   = 1,
 		.has_dvb        = 1,
 		.dvb_gpio       = hauppauge_wintv_hvr_900_digital,
-		.ir_codes       = &ir_codes_hauppauge_new_table,
+		.ir_codes       = &IR_KEYTABLE(hauppauge_new),
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -868,7 +868,7 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware   = 1,
 		.has_dvb        = 1,
 		.dvb_gpio       = hauppauge_wintv_hvr_900_digital,
-		.ir_codes       = &ir_codes_rc5_hauppauge_new_table,
+		.ir_codes       = &IR_KEYTABLE(rc5_hauppauge_new),
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -894,7 +894,7 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware   = 1,
 		.has_dvb        = 1,
 		.dvb_gpio       = hauppauge_wintv_hvr_900_digital,
-		.ir_codes       = &ir_codes_pinnacle_pctv_hd_table,
+		.ir_codes       = &IR_KEYTABLE(pinnacle_pctv_hd),
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -920,7 +920,7 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware   = 1,
 		.has_dvb        = 1,
 		.dvb_gpio       = hauppauge_wintv_hvr_900_digital,
-		.ir_codes       = &ir_codes_ati_tv_wonder_hd_600_table,
+		.ir_codes       = &IR_KEYTABLE(ati_tv_wonder_hd_600),
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -946,7 +946,7 @@ struct em28xx_board em28xx_boards[] = {
 		.decoder        = EM28XX_TVP5150,
 		.has_dvb        = 1,
 		.dvb_gpio       = default_digital,
-		.ir_codes       = &ir_codes_terratec_cinergy_xs_table,
+		.ir_codes       = &IR_KEYTABLE(terratec_cinergy_xs),
 		.xclk           = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -1296,7 +1296,7 @@ struct em28xx_board em28xx_boards[] = {
 		.decoder	= EM28XX_SAA711X,
 		.has_dvb	= 1,
 		.dvb_gpio	= em2882_kworld_315u_digital,
-		.ir_codes	= &ir_codes_kworld_315u_table,
+		.ir_codes	= &IR_KEYTABLE(kworld_315u),
 		.xclk		= EM28XX_XCLK_FREQUENCY_12MHZ,
 		.i2c_speed	= EM28XX_I2C_CLK_WAIT_ENABLE,
 		/* Analog mode - still not ready */
@@ -1425,7 +1425,7 @@ struct em28xx_board em28xx_boards[] = {
 		.has_dvb      = 1,
 		.dvb_gpio     = kworld_330u_digital,
 		.xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
-		.ir_codes     = &ir_codes_kworld_315u_table,
+		.ir_codes     = &IR_KEYTABLE(kworld_315u),
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
@@ -1448,7 +1448,7 @@ struct em28xx_board em28xx_boards[] = {
 		.decoder      = EM28XX_TVP5150,
 		.has_dvb      = 1,
 		.dvb_gpio     = hauppauge_wintv_hvr_900_digital,
-		.ir_codes     = &ir_codes_terratec_cinergy_xs_table,
+		.ir_codes     = &IR_KEYTABLE(terratec_cinergy_xs),
 		.xclk         = EM28XX_XCLK_FREQUENCY_12MHZ,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -1541,7 +1541,7 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware = 1,
 		.decoder      = EM28XX_TVP5150,
 		.tuner_gpio   = default_tuner_gpio,
-		.ir_codes     = &ir_codes_kaiomy_table,
+		.ir_codes     = &IR_KEYTABLE(kaiomy),
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
@@ -1641,7 +1641,7 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware = 1,
 		.has_dvb      = 1,
 		.dvb_gpio     = evga_indtube_digital,
-		.ir_codes     = &ir_codes_evga_indtube_table,
+		.ir_codes     = &IR_KEYTABLE(evga_indtube),
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
@@ -2335,21 +2335,21 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
 	switch (dev->model) {
 	case EM2800_BOARD_TERRATEC_CINERGY_200:
 	case EM2820_BOARD_TERRATEC_CINERGY_250:
-		dev->init_data.ir_codes = &ir_codes_em_terratec_table;
+		dev->init_data.ir_codes = &IR_KEYTABLE(em_terratec);
 		dev->init_data.get_key = em28xx_get_key_terratec;
 		dev->init_data.name = "i2c IR (EM28XX Terratec)";
 		break;
 	case EM2820_BOARD_PINNACLE_USB_2:
-		dev->init_data.ir_codes = &ir_codes_pinnacle_grey_table;
+		dev->init_data.ir_codes = &IR_KEYTABLE(pinnacle_grey);
 		dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
 		dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
 		break;
 	case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
-		dev->init_data.ir_codes = &ir_codes_rc5_hauppauge_new_table;
+		dev->init_data.ir_codes = &IR_KEYTABLE(rc5_hauppauge_new);
 		dev->init_data.get_key = em28xx_get_key_em_haup;
 		dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
 	case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
-		dev->init_data.ir_codes = &ir_codes_winfast_usbii_deluxe_table;;
+		dev->init_data.ir_codes = &IR_KEYTABLE(winfast_usbii_deluxe);;
 		dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
 		dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
 		break;