Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits)
  V4L-DVB: cx88-dvb: remove extra attribution for core
  V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index
  V4L/DVB: Add support for SMT7020 to cx88
  V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment
  V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix
  V4L/DVB: gspca_stv06xx: Add support for camera button
  V4L/DVB: gspca_ov519: add support for the button on ov511 based cams
  V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams
  V4L/DVB: gspca_ov519: add support for the button on ov519 based cams
  V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set
  V4L/DVB: gspca_main: some input error handling fixes
  V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs
  V4L/DVB: gspca_pac7302: much improved exposure control
  V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras
  V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls
  V4L/DVB: Documentation: gspca.txt: update known mr97310a cams
  V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix
  V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480
  V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls
  V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl
  ...

1 files changed, 73 insertions, 7 deletions

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 25100001ffff..ecbcefb08739 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -232,6 +232,12 @@ static struct em28xx_reg_seq vc211a_enable[] = {
 	{	-1,		-1,	-1,		-1},
 };
 
+static struct em28xx_reg_seq dikom_dk300_digital[] = {
+	{EM28XX_R08_GPIO,	0x6e,	~EM_GPIO_4,	10},
+	{EM2880_R04_GPO,	0x08,	0xff,		10},
+	{ -1,			-1,	-1,		-1},
+};
+
 
 /*
  *  Board definitions
@@ -461,21 +467,30 @@ struct em28xx_board em28xx_boards[] = {
 		.name         = "Leadtek Winfast USB II Deluxe",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
-		.tda9887_conf = TDA9887_PRESENT,
+		.has_ir_i2c   = 1,
+		.tvaudio_addr = 0x58,
+		.tda9887_conf = TDA9887_PRESENT |
+				TDA9887_PORT2_ACTIVE |
+				TDA9887_QSS,
 		.decoder      = EM28XX_SAA711X,
+		.adecoder     = EM28XX_TVAUDIO,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
-			.vmux     = SAA7115_COMPOSITE2,
-			.amux     = EM28XX_AMUX_VIDEO,
+			.vmux     = SAA7115_COMPOSITE4,
+			.amux     = EM28XX_AMUX_AUX,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
-			.vmux     = SAA7115_COMPOSITE0,
+			.vmux     = SAA7115_COMPOSITE5,
 			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
-			.vmux     = SAA7115_COMPOSITE0,
+			.vmux     = SAA7115_SVIDEO3,
 			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
+			.radio	  = {
+			.type     = EM28XX_RADIO,
+			.amux     = EM28XX_AMUX_AUX,
+			}
 	},
 	[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
 		.name         = "Videology 20K14XUSB USB2.0",
@@ -730,11 +745,12 @@ struct em28xx_board em28xx_boards[] = {
 
 	[EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
 		.name         = "Terratec Hybrid XS Secam",
-		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.has_msp34xx  = 1,
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
+		.has_dvb      = 1,
+		.dvb_gpio     = default_digital,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
@@ -1265,6 +1281,7 @@ struct em28xx_board em28xx_boards[] = {
 		.decoder	= EM28XX_SAA711X,
 		.has_dvb	= 1,
 		.dvb_gpio	= em2882_kworld_315u_digital,
+		.ir_codes	= &ir_codes_kworld_315u_table,
 		.xclk		= EM28XX_XCLK_FREQUENCY_12MHZ,
 		.i2c_speed	= EM28XX_I2C_CLK_WAIT_ENABLE,
 		/* Analog mode - still not ready */
@@ -1431,6 +1448,21 @@ struct em28xx_board em28xx_boards[] = {
 			.gpio     = hauppauge_wintv_hvr_900_analog,
 		} },
 	},
+	[EM2882_BOARD_DIKOM_DK300] = {
+		.name         = "Dikom DK300",
+		.tuner_type   = TUNER_XC2028,
+		.tuner_gpio   = default_tuner_gpio,
+		.decoder      = EM28XX_TVP5150,
+		.mts_firmware = 1,
+		.has_dvb      = 1,
+		.dvb_gpio     = dikom_dk300_digital,
+		.input        = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = default_analog,
+		} },
+	},
 	[EM2883_BOARD_KWORLD_HYBRID_330U] = {
 		.name         = "Kworld PlusTV HD Hybrid 330",
 		.tuner_type   = TUNER_XC2028,
@@ -1751,6 +1783,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = {
 	{0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
 	{0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
 	{0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
+	{0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
 };
 
 /* I2C devicelist hash table for devices with generic USB IDs */
@@ -2103,6 +2136,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 		ctl->demod = XC3028_FE_DEFAULT;
 		break;
 	case EM2883_BOARD_KWORLD_HYBRID_330U:
+	case EM2882_BOARD_DIKOM_DK300:
 		ctl->demod = XC3028_FE_CHINA;
 		ctl->fname = XC2028_DEFAULT_FIRMWARE;
 		break;
@@ -2259,9 +2293,12 @@ static int em28xx_hint_board(struct em28xx *dev)
 /* ----------------------------------------------------------------------- */
 void em28xx_register_i2c_ir(struct em28xx *dev)
 {
+	/* Leadtek winfast tv USBII deluxe can find a non working IR-device */
+	/* at address 0x18, so if that address is needed for another board in */
+	/* the future, please put it after 0x1f. */
 	struct i2c_board_info info;
 	const unsigned short addr_list[] = {
-		 0x30, 0x47, I2C_CLIENT_END
+		 0x1f, 0x30, 0x47, I2C_CLIENT_END
 	};
 
 	if (disable_ir)
@@ -2288,6 +2325,10 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
 		dev->init_data.ir_codes = &ir_codes_rc5_hauppauge_new_table;
 		dev->init_data.get_key = em28xx_get_key_em_haup;
 		dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
+	case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
+		dev->init_data.ir_codes = &ir_codes_winfast_usbii_deluxe_table;;
+		dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
+		dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
 		break;
 	}
 
@@ -2381,6 +2422,31 @@ void em28xx_card_setup(struct em28xx *dev)
 		em28xx_gpio_set(dev, dev->board.tuner_gpio);
 		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 		break;
+
+/*
+		 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
+		 *
+		 * This occurs because they share identical USB vendor and
+		 * product IDs.
+		 *
+		 * What we do here is look up the EEPROM hash of the Dikom
+		 * and if it is found then we decide that we do not have
+		 * a Kworld and reset the device to the Dikom instead.
+		 *
+		 * This solution is only valid if they do not share eeprom
+		 * hash identities which has not been determined as yet.
+		 */
+	case EM2882_BOARD_KWORLD_VS_DVBT:
+		if (!em28xx_hint_board(dev))
+			em28xx_set_model(dev);
+
+		/* In cases where we had to use a board hint, the call to
+		   em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
+		   so make the call now so the analog GPIOs are set properly
+		   before probing the i2c bus. */
+		em28xx_gpio_set(dev, dev->board.tuner_gpio);
+		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
+		break;
 	}
 
 #if defined(CONFIG_MODULES) && defined(MODULE)