[media] move parallel port/isa video drivers to drivers/media/parport/

We should keep just the I2C drivers under drivers/media/video, and
then rename it to drivers/media/i2c.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 1113 deletions

diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
deleted file mode 100644
index 5b75a64b199b..000000000000
--- a/drivers/media/video/bw-qcam.c
+++ /dev/null
@@ -1,1113 +0,0 @@
-/*
- *    QuickCam Driver For Video4Linux.
- *
- *	Video4Linux conversion work by Alan Cox.
- *	Parport compatibility by Phil Blundell.
- *	Busy loop avoidance by Mark Cooke.
- *
- *    Module parameters:
- *
- *	maxpoll=<1 - 5000>
- *
- *	  When polling the QuickCam for a response, busy-wait for a
- *	  maximum of this many loops. The default of 250 gives little
- *	  impact on interactive response.
- *
- *	  NOTE: If this parameter is set too high, the processor
- *		will busy wait until this loop times out, and then
- *		slowly poll for a further 5 seconds before failing
- *		the transaction. You have been warned.
- *
- *	yieldlines=<1 - 250>
- *
- *	  When acquiring a frame from the camera, the data gathering
- *	  loop will yield back to the scheduler after completing
- *	  this many lines. The default of 4 provides a trade-off
- *	  between increased frame acquisition time and impact on
- *	  interactive response.
- */
-
-/* qcam-lib.c -- Library for programming with the Connectix QuickCam.
- * See the included documentation for usage instructions and details
- * of the protocol involved. */
-
-
-/* Version 0.5, August 4, 1996 */
-/* Version 0.7, August 27, 1996 */
-/* Version 0.9, November 17, 1996 */
-
-
-/******************************************************************
-
-Copyright (C) 1996 by Scott Laird
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL SCOTT LAIRD BE LIABLE FOR ANY CLAIM, DAMAGES OR
-OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-OTHER DEALINGS IN THE SOFTWARE.
-
-******************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/parport.h>
-#include <linux/sched.h>
-#include <linux/videodev2.h>
-#include <linux/mutex.h>
-#include <asm/uaccess.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-fh.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-event.h>
-
-/* One from column A... */
-#define QC_NOTSET 0
-#define QC_UNIDIR 1
-#define QC_BIDIR  2
-#define QC_SERIAL 3
-
-/* ... and one from column B */
-#define QC_ANY          0x00
-#define QC_FORCE_UNIDIR 0x10
-#define QC_FORCE_BIDIR  0x20
-#define QC_FORCE_SERIAL 0x30
-/* in the port_mode member */
-
-#define QC_MODE_MASK    0x07
-#define QC_FORCE_MASK   0x70
-
-#define MAX_HEIGHT 243
-#define MAX_WIDTH 336
-
-/* Bit fields for status flags */
-#define QC_PARAM_CHANGE	0x01 /* Camera status change has occurred */
-
-struct qcam {
-	struct v4l2_device v4l2_dev;
-	struct video_device vdev;
-	struct v4l2_ctrl_handler hdl;
-	struct pardevice *pdev;
-	struct parport *pport;
-	struct mutex lock;
-	int width, height;
-	int bpp;
-	int mode;
-	int contrast, brightness, whitebal;
-	int port_mode;
-	int transfer_scale;
-	int top, left;
-	int status;
-	unsigned int saved_bits;
-	unsigned long in_use;
-};
-
-static unsigned int maxpoll = 250;   /* Maximum busy-loop count for qcam I/O */
-static unsigned int yieldlines = 4;  /* Yield after this many during capture */
-static int video_nr = -1;
-static unsigned int force_init;		/* Whether to probe aggressively */
-
-module_param(maxpoll, int, 0);
-module_param(yieldlines, int, 0);
-module_param(video_nr, int, 0);
-
-/* Set force_init=1 to avoid detection by polling status register and
- * immediately attempt to initialize qcam */
-module_param(force_init, int, 0);
-
-#define MAX_CAMS 4
-static struct qcam *qcams[MAX_CAMS];
-static unsigned int num_cams;
-
-static inline int read_lpstatus(struct qcam *q)
-{
-	return parport_read_status(q->pport);
-}
-
-static inline int read_lpdata(struct qcam *q)
-{
-	return parport_read_data(q->pport);
-}
-
-static inline void write_lpdata(struct qcam *q, int d)
-{
-	parport_write_data(q->pport, d);
-}
-
-static void write_lpcontrol(struct qcam *q, int d)
-{
-	if (d & 0x20) {
-		/* Set bidirectional mode to reverse (data in) */
-		parport_data_reverse(q->pport);
-	} else {
-		/* Set bidirectional mode to forward (data out) */
-		parport_data_forward(q->pport);
-	}
-
-	/* Now issue the regular port command, but strip out the
-	 * direction flag */
-	d &= ~0x20;
-	parport_write_control(q->pport, d);
-}
-
-
-/* qc_waithand busy-waits for a handshake signal from the QuickCam.
- * Almost all communication with the camera requires handshaking. */
-
-static int qc_waithand(struct qcam *q, int val)
-{
-	int status;
-	int runs = 0;
-
-	if (val) {
-		while (!((status = read_lpstatus(q)) & 8)) {
-			/* 1000 is enough spins on the I/O for all normal
-			   cases, at that point we start to poll slowly
-			   until the camera wakes up. However, we are
-			   busy blocked until the camera responds, so
-			   setting it lower is much better for interactive
-			   response. */
-
-			if (runs++ > maxpoll)
-				msleep_interruptible(5);
-			if (runs > (maxpoll + 1000)) /* 5 seconds */
-				return -1;
-		}
-	} else {
-		while (((status = read_lpstatus(q)) & 8)) {
-			/* 1000 is enough spins on the I/O for all normal
-			   cases, at that point we start to poll slowly
-			   until the camera wakes up. However, we are
-			   busy blocked until the camera responds, so
-			   setting it lower is much better for interactive
-			   response. */
-
-			if (runs++ > maxpoll)
-				msleep_interruptible(5);
-			if (runs++ > (maxpoll + 1000)) /* 5 seconds */
-				return -1;
-		}
-	}
-
-	return status;
-}
-
-/* Waithand2 is used when the qcam is in bidirectional mode, and the
- * handshaking signal is CamRdy2 (bit 0 of data reg) instead of CamRdy1
- * (bit 3 of status register).  It also returns the last value read,
- * since this data is useful. */
-
-static unsigned int qc_waithand2(struct qcam *q, int val)
-{
-	unsigned int status;
-	int runs = 0;
-
-	do {
-		status = read_lpdata(q);
-		/* 1000 is enough spins on the I/O for all normal
-		   cases, at that point we start to poll slowly
-		   until the camera wakes up. However, we are
-		   busy blocked until the camera responds, so
-		   setting it lower is much better for interactive
-		   response. */
-
-		if (runs++ > maxpoll)
-			msleep_interruptible(5);
-		if (runs++ > (maxpoll + 1000)) /* 5 seconds */
-			return 0;
-	} while ((status & 1) != val);
-
-	return status;
-}
-
-/* qc_command is probably a bit of a misnomer -- it's used to send
- * bytes *to* the camera.  Generally, these bytes are either commands
- * or arguments to commands, so the name fits, but it still bugs me a
- * bit.  See the documentation for a list of commands. */
-
-static int qc_command(struct qcam *q, int command)
-{
-	int n1, n2;
-	int cmd;
-
-	write_lpdata(q, command);
-	write_lpcontrol(q, 6);
-
-	n1 = qc_waithand(q, 1);
-
-	write_lpcontrol(q, 0xe);
-	n2 = qc_waithand(q, 0);
-
-	cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
-	return cmd;
-}
-
-static int qc_readparam(struct qcam *q)
-{
-	int n1, n2;
-	int cmd;
-
-	write_lpcontrol(q, 6);
-	n1 = qc_waithand(q, 1);
-
-	write_lpcontrol(q, 0xe);
-	n2 = qc_waithand(q, 0);
-
-	cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4);
-	return cmd;
-}
-
-
-/* Try to detect a QuickCam.  It appears to flash the upper 4 bits of
-   the status register at 5-10 Hz.  This is only used in the autoprobe
-   code.  Be aware that this isn't the way Connectix detects the
-   camera (they send a reset and try to handshake), but this should be
-   almost completely safe, while their method screws up my printer if
-   I plug it in before the camera. */
-
-static int qc_detect(struct qcam *q)
-{
-	int reg, lastreg;
-	int count = 0;
-	int i;
-
-	if (force_init)
-		return 1;
-
-	lastreg = reg = read_lpstatus(q) & 0xf0;
-
-	for (i = 0; i < 500; i++) {
-		reg = read_lpstatus(q) & 0xf0;
-		if (reg != lastreg)
-			count++;
-		lastreg = reg;
-		mdelay(2);
-	}
-
-
-#if 0
-	/* Force camera detection during testing. Sometimes the camera
-	   won't be flashing these bits. Possibly unloading the module
-	   in the middle of a grab? Or some timeout condition?
-	   I've seen this parameter as low as 19 on my 450Mhz box - mpc */
-	printk(KERN_DEBUG "Debugging: QCam detection counter <30-200 counts as detected>: %d\n", count);
-	return 1;
-#endif
-
-	/* Be (even more) liberal in what you accept...  */
-
-	if (count > 20 && count < 400) {
-		return 1;	/* found */
-	} else {
-		printk(KERN_ERR "No Quickcam found on port %s\n",
-				q->pport->name);
-		printk(KERN_DEBUG "Quickcam detection counter: %u\n", count);
-		return 0;	/* not found */
-	}
-}
-
-/* Decide which scan mode to use.  There's no real requirement that
- * the scanmode match the resolution in q->height and q-> width -- the
- * camera takes the picture at the resolution specified in the
- * "scanmode" and then returns the image at the resolution specified
- * with the resolution commands.  If the scan is bigger than the
- * requested resolution, the upper-left hand corner of the scan is
- * returned.  If the scan is smaller, then the rest of the image
- * returned contains garbage. */
-
-static int qc_setscanmode(struct qcam *q)
-{
-	int old_mode = q->mode;
-
-	switch (q->transfer_scale) {
-	case 1:
-		q->mode = 0;
-		break;
-	case 2:
-		q->mode = 4;
-		break;
-	case 4:
-		q->mode = 8;
-		break;
-	}
-
-	switch (q->bpp) {
-	case 4:
-		break;
-	case 6:
-		q->mode += 2;
-		break;
-	}
-
-	switch (q->port_mode & QC_MODE_MASK) {
-	case QC_BIDIR:
-		q->mode += 1;
-		break;
-	case QC_NOTSET:
-	case QC_UNIDIR:
-		break;
-	}
-
-	if (q->mode != old_mode)
-		q->status |= QC_PARAM_CHANGE;
-
-	return 0;
-}
-
-
-/* Reset the QuickCam.  This uses the same sequence the Windows
- * QuickPic program uses.  Someone with a bi-directional port should
- * check that bi-directional mode is detected right, and then
- * implement bi-directional mode in qc_readbyte(). */
-
-static void qc_reset(struct qcam *q)
-{
-	switch (q->port_mode & QC_FORCE_MASK) {
-	case QC_FORCE_UNIDIR:
-		q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
-		break;
-
-	case QC_FORCE_BIDIR:
-		q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
-		break;
-
-	case QC_ANY:
-		write_lpcontrol(q, 0x20);
-		write_lpdata(q, 0x75);
-
-		if (read_lpdata(q) != 0x75)
-			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
-		else
-			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
-		break;
-	}
-
-	write_lpcontrol(q, 0xb);
-	udelay(250);
-	write_lpcontrol(q, 0xe);
-	qc_setscanmode(q);		/* in case port_mode changed */
-}
-
-
-
-/* Reset the QuickCam and program for brightness, contrast,
- * white-balance, and resolution. */
-
-static void qc_set(struct qcam *q)
-{
-	int val;
-	int val2;
-
-	qc_reset(q);
-
-	/* Set the brightness.  Yes, this is repetitive, but it works.
-	 * Shorter versions seem to fail subtly.  Feel free to try :-). */
-	/* I think the problem was in qc_command, not here -- bls */
-
-	qc_command(q, 0xb);
-	qc_command(q, q->brightness);
-
-	val = q->height / q->transfer_scale;
-	qc_command(q, 0x11);
-	qc_command(q, val);
-	if ((q->port_mode & QC_MODE_MASK) == QC_UNIDIR && q->bpp == 6) {
-		/* The normal "transfers per line" calculation doesn't seem to work
-		   as expected here (and yet it works fine in qc_scan).  No idea
-		   why this case is the odd man out.  Fortunately, Laird's original
-		   working version gives me a good way to guess at working values.
-		   -- bls */
-		val = q->width;
-		val2 = q->transfer_scale * 4;
-	} else {
-		val = q->width * q->bpp;
-		val2 = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) *
-			q->transfer_scale;
-	}
-	val = DIV_ROUND_UP(val, val2);
-	qc_command(q, 0x13);
-	qc_command(q, val);
-
-	/* Setting top and left -- bls */
-	qc_command(q, 0xd);
-	qc_command(q, q->top);
-	qc_command(q, 0xf);
-	qc_command(q, q->left / 2);
-
-	qc_command(q, 0x19);
-	qc_command(q, q->contrast);
-	qc_command(q, 0x1f);
-	qc_command(q, q->whitebal);
-
-	/* Clear flag that we must update the grabbing parameters on the camera
-	   before we grab the next frame */
-	q->status &= (~QC_PARAM_CHANGE);
-}
-
-/* Qc_readbytes reads some bytes from the QC and puts them in
-   the supplied buffer.  It returns the number of bytes read,
-   or -1 on error. */
-
-static inline int qc_readbytes(struct qcam *q, char buffer[])
-{
-	int ret = 1;
-	unsigned int hi, lo;
-	unsigned int hi2, lo2;
-	static int state;
-
-	if (buffer == NULL) {
-		state = 0;
-		return 0;
-	}
-
-	switch (q->port_mode & QC_MODE_MASK) {
-	case QC_BIDIR:		/* Bi-directional Port */
-		write_lpcontrol(q, 0x26);
-		lo = (qc_waithand2(q, 1) >> 1);
-		hi = (read_lpstatus(q) >> 3) & 0x1f;
-		write_lpcontrol(q, 0x2e);
-		lo2 = (qc_waithand2(q, 0) >> 1);
-		hi2 = (read_lpstatus(q) >> 3) & 0x1f;
-		switch (q->bpp) {
-		case 4:
-			buffer[0] = lo & 0xf;
-			buffer[1] = ((lo & 0x70) >> 4) | ((hi & 1) << 3);
-			buffer[2] = (hi & 0x1e) >> 1;
-			buffer[3] = lo2 & 0xf;
-			buffer[4] = ((lo2 & 0x70) >> 4) | ((hi2 & 1) << 3);
-			buffer[5] = (hi2 & 0x1e) >> 1;
-			ret = 6;
-			break;
-		case 6:
-			buffer[0] = lo & 0x3f;
-			buffer[1] = ((lo & 0x40) >> 6) | (hi << 1);
-			buffer[2] = lo2 & 0x3f;
-			buffer[3] = ((lo2 & 0x40) >> 6) | (hi2 << 1);
-			ret = 4;
-			break;
-		}
-		break;
-
-	case QC_UNIDIR:	/* Unidirectional Port */
-		write_lpcontrol(q, 6);
-		lo = (qc_waithand(q, 1) & 0xf0) >> 4;
-		write_lpcontrol(q, 0xe);
-		hi = (qc_waithand(q, 0) & 0xf0) >> 4;
-
-		switch (q->bpp) {
-		case 4:
-			buffer[0] = lo;
-			buffer[1] = hi;
-			ret = 2;
-			break;
-		case 6:
-			switch (state) {
-			case 0:
-				buffer[0] = (lo << 2) | ((hi & 0xc) >> 2);
-				q->saved_bits = (hi & 3) << 4;
-				state = 1;
-				ret = 1;
-				break;
-			case 1:
-				buffer[0] = lo | q->saved_bits;
-				q->saved_bits = hi << 2;
-				state = 2;
-				ret = 1;
-				break;
-			case 2:
-				buffer[0] = ((lo & 0xc) >> 2) | q->saved_bits;
-				buffer[1] = ((lo & 3) << 4) | hi;
-				state = 0;
-				ret = 2;
-				break;
-			}
-			break;
-		}
-		break;
-	}
-	return ret;
-}
-
-/* requests a scan from the camera.  It sends the correct instructions
- * to the camera and then reads back the correct number of bytes.  In
- * previous versions of this routine the return structure contained
- * the raw output from the camera, and there was a 'qc_convertscan'
- * function that converted that to a useful format.  In version 0.3 I
- * rolled qc_convertscan into qc_scan and now I only return the
- * converted scan.  The format is just an one-dimensional array of
- * characters, one for each pixel, with 0=black up to n=white, where
- * n=2^(bit depth)-1.  Ask me for more details if you don't understand
- * this. */
-
-static long qc_capture(struct qcam *q, char __user *buf, unsigned long len)
-{
-	int i, j, k, yield;
-	int bytes;
-	int linestotrans, transperline;
-	int divisor;
-	int pixels_per_line;
-	int pixels_read = 0;
-	int got = 0;
-	char buffer[6];
-	int  shift = 8 - q->bpp;
-	char invert;
-
-	if (q->mode == -1)
-		return -ENXIO;
-
-	qc_command(q, 0x7);
-	qc_command(q, q->mode);
-
-	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) {
-		write_lpcontrol(q, 0x2e);	/* turn port around */
-		write_lpcontrol(q, 0x26);
-		qc_waithand(q, 1);
-		write_lpcontrol(q, 0x2e);
-		qc_waithand(q, 0);
-	}
-
-	/* strange -- should be 15:63 below, but 4bpp is odd */
-	invert = (q->bpp == 4) ? 16 : 63;
-
-	linestotrans = q->height / q->transfer_scale;
-	pixels_per_line = q->width / q->transfer_scale;
-	transperline = q->width * q->bpp;
-	divisor = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) *
-		q->transfer_scale;
-	transperline = DIV_ROUND_UP(transperline, divisor);
-
-	for (i = 0, yield = yieldlines; i < linestotrans; i++) {
-		for (pixels_read = j = 0; j < transperline; j++) {
-			bytes = qc_readbytes(q, buffer);
-			for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++) {
-				int o;
-				if (buffer[k] == 0 && invert == 16) {
-					/* 4bpp is odd (again) -- inverter is 16, not 15, but output
-					   must be 0-15 -- bls */
-					buffer[k] = 16;
-				}
-				o = i * pixels_per_line + pixels_read + k;
-				if (o < len) {
-					u8 ch = invert - buffer[k];
-					got++;
-					put_user(ch << shift, buf + o);
-				}
-			}
-			pixels_read += bytes;
-		}
-		qc_readbytes(q, NULL);	/* reset state machine */
-
-		/* Grabbing an entire frame from the quickcam is a lengthy
-		   process. We don't (usually) want to busy-block the
-		   processor for the entire frame. yieldlines is a module
-		   parameter. If we yield every line, the minimum frame
-		   time will be 240 / 200 = 1.2 seconds. The compile-time
-		   default is to yield every 4 lines. */
-		if (i >= yield) {
-			msleep_interruptible(5);
-			yield = i + yieldlines;
-		}
-	}
-
-	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) {
-		write_lpcontrol(q, 2);
-		write_lpcontrol(q, 6);
-		udelay(3);
-		write_lpcontrol(q, 0xe);
-	}
-	if (got < len)
-		return got;
-	return len;
-}
-
-/*
- *	Video4linux interfacing
- */
-
-static int qcam_querycap(struct file *file, void  *priv,
-					struct v4l2_capability *vcap)
-{
-	struct qcam *qcam = video_drvdata(file);
-
-	strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
-	strlcpy(vcap->card, "Connectix B&W Quickcam", sizeof(vcap->card));
-	strlcpy(vcap->bus_info, qcam->pport->name, sizeof(vcap->bus_info));
-	vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
-	vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS;
-	return 0;
-}
-
-static int qcam_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
-{
-	if (vin->index > 0)
-		return -EINVAL;
-	strlcpy(vin->name, "Camera", sizeof(vin->name));
-	vin->type = V4L2_INPUT_TYPE_CAMERA;
-	vin->audioset = 0;
-	vin->tuner = 0;
-	vin->std = 0;
-	vin->status = 0;
-	return 0;
-}
-
-static int qcam_g_input(struct file *file, void *fh, unsigned int *inp)
-{
-	*inp = 0;
-	return 0;
-}
-
-static int qcam_s_input(struct file *file, void *fh, unsigned int inp)
-{
-	return (inp > 0) ? -EINVAL : 0;
-}
-
-static int qcam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
-{
-	struct qcam *qcam = video_drvdata(file);
-	struct v4l2_pix_format *pix = &fmt->fmt.pix;
-
-	pix->width = qcam->width / qcam->transfer_scale;
-	pix->height = qcam->height / qcam->transfer_scale;
-	pix->pixelformat = (qcam->bpp == 4) ? V4L2_PIX_FMT_Y4 : V4L2_PIX_FMT_Y6;
-	pix->field = V4L2_FIELD_NONE;
-	pix->bytesperline = pix->width;
-	pix->sizeimage = pix->width * pix->height;
-	/* Just a guess */
-	pix->colorspace = V4L2_COLORSPACE_SRGB;
-	return 0;
-}
-
-static int qcam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
-{
-	struct v4l2_pix_format *pix = &fmt->fmt.pix;
-
-	if (pix->height <= 60 || pix->width <= 80) {
-		pix->height = 60;
-		pix->width = 80;
-	} else if (pix->height <= 120 || pix->width <= 160) {
-		pix->height = 120;
-		pix->width = 160;
-	} else {
-		pix->height = 240;
-		pix->width = 320;
-	}
-	if (pix->pixelformat != V4L2_PIX_FMT_Y4 &&
-	    pix->pixelformat != V4L2_PIX_FMT_Y6)
-		pix->pixelformat = V4L2_PIX_FMT_Y4;
-	pix->field = V4L2_FIELD_NONE;
-	pix->bytesperline = pix->width;
-	pix->sizeimage = pix->width * pix->height;
-	/* Just a guess */
-	pix->colorspace = V4L2_COLORSPACE_SRGB;
-	return 0;
-}
-
-static int qcam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
-{
-	struct qcam *qcam = video_drvdata(file);
-	struct v4l2_pix_format *pix = &fmt->fmt.pix;
-	int ret = qcam_try_fmt_vid_cap(file, fh, fmt);
-
-	if (ret)
-		return ret;
-	qcam->width = 320;
-	qcam->height = 240;
-	if (pix->height == 60)
-		qcam->transfer_scale = 4;
-	else if (pix->height == 120)
-		qcam->transfer_scale = 2;
-	else
-		qcam->transfer_scale = 1;
-	if (pix->pixelformat == V4L2_PIX_FMT_Y6)
-		qcam->bpp = 6;
-	else
-		qcam->bpp = 4;
-
-	mutex_lock(&qcam->lock);
-	qc_setscanmode(qcam);
-	/* We must update the camera before we grab. We could
-	   just have changed the grab size */
-	qcam->status |= QC_PARAM_CHANGE;
-	mutex_unlock(&qcam->lock);
-	return 0;
-}
-
-static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt)
-{
-	static struct v4l2_fmtdesc formats[] = {
-		{ 0, 0, 0,
-		  "4-Bit Monochrome", V4L2_PIX_FMT_Y4,
-		  { 0, 0, 0, 0 }
-		},
-		{ 1, 0, 0,
-		  "6-Bit Monochrome", V4L2_PIX_FMT_Y6,
-		  { 0, 0, 0, 0 }
-		},
-	};
-	enum v4l2_buf_type type = fmt->type;
-
-	if (fmt->index > 1)
-		return -EINVAL;
-
-	*fmt = formats[fmt->index];
-	fmt->type = type;
-	return 0;
-}
-
-static int qcam_enum_framesizes(struct file *file, void *fh,
-					 struct v4l2_frmsizeenum *fsize)
-{
-	static const struct v4l2_frmsize_discrete sizes[] = {
-		{  80,  60 },
-		{ 160, 120 },
-		{ 320, 240 },
-	};
-
-	if (fsize->index > 2)
-		return -EINVAL;
-	if (fsize->pixel_format != V4L2_PIX_FMT_Y4 &&
-	    fsize->pixel_format != V4L2_PIX_FMT_Y6)
-		return -EINVAL;
-	fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
-	fsize->discrete = sizes[fsize->index];
-	return 0;
-}
-
-static ssize_t qcam_read(struct file *file, char __user *buf,
-		size_t count, loff_t *ppos)
-{
-	struct qcam *qcam = video_drvdata(file);
-	int len;
-	parport_claim_or_block(qcam->pdev);
-
-	mutex_lock(&qcam->lock);
-
-	qc_reset(qcam);
-
-	/* Update the camera parameters if we need to */
-	if (qcam->status & QC_PARAM_CHANGE)
-		qc_set(qcam);
-
-	len = qc_capture(qcam, buf, count);
-
-	mutex_unlock(&qcam->lock);
-
-	parport_release(qcam->pdev);
-	return len;
-}
-
-static unsigned int qcam_poll(struct file *filp, poll_table *wait)
-{
-	return v4l2_ctrl_poll(filp, wait) | POLLIN | POLLRDNORM;
-}
-
-static int qcam_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct qcam *qcam =
-		container_of(ctrl->handler, struct qcam, hdl);
-	int ret = 0;
-
-	mutex_lock(&qcam->lock);
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		qcam->brightness = ctrl->val;
-		break;
-	case V4L2_CID_CONTRAST:
-		qcam->contrast = ctrl->val;
-		break;
-	case V4L2_CID_GAMMA:
-		qcam->whitebal = ctrl->val;
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	if (ret == 0) {
-		qc_setscanmode(qcam);
-		qcam->status |= QC_PARAM_CHANGE;
-	}
-	mutex_unlock(&qcam->lock);
-	return ret;
-}
-
-static const struct v4l2_file_operations qcam_fops = {
-	.owner		= THIS_MODULE,
-	.open		= v4l2_fh_open,
-	.release	= v4l2_fh_release,
-	.poll		= qcam_poll,
-	.unlocked_ioctl = video_ioctl2,
-	.read		= qcam_read,
-};
-
-static const struct v4l2_ioctl_ops qcam_ioctl_ops = {
-	.vidioc_querycap    		    = qcam_querycap,
-	.vidioc_g_input      		    = qcam_g_input,
-	.vidioc_s_input      		    = qcam_s_input,
-	.vidioc_enum_input   		    = qcam_enum_input,
-	.vidioc_enum_fmt_vid_cap 	    = qcam_enum_fmt_vid_cap,
-	.vidioc_enum_framesizes		    = qcam_enum_framesizes,
-	.vidioc_g_fmt_vid_cap 		    = qcam_g_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap  		    = qcam_s_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap  	    = qcam_try_fmt_vid_cap,
-	.vidioc_log_status		    = v4l2_ctrl_log_status,
-	.vidioc_subscribe_event		    = v4l2_ctrl_subscribe_event,
-	.vidioc_unsubscribe_event	    = v4l2_event_unsubscribe,
-};
-
-static const struct v4l2_ctrl_ops qcam_ctrl_ops = {
-	.s_ctrl = qcam_s_ctrl,
-};
-
-/* Initialize the QuickCam driver control structure.  This is where
- * defaults are set for people who don't have a config file.*/
-
-static struct qcam *qcam_init(struct parport *port)
-{
-	struct qcam *qcam;
-	struct v4l2_device *v4l2_dev;
-
-	qcam = kzalloc(sizeof(struct qcam), GFP_KERNEL);
-	if (qcam == NULL)
-		return NULL;
-
-	v4l2_dev = &qcam->v4l2_dev;
-	snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), "bw-qcam%d", num_cams);
-
-	if (v4l2_device_register(port->dev, v4l2_dev) < 0) {
-		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
-		kfree(qcam);
-		return NULL;
-	}
-
-	v4l2_ctrl_handler_init(&qcam->hdl, 3);
-	v4l2_ctrl_new_std(&qcam->hdl, &qcam_ctrl_ops,
-			  V4L2_CID_BRIGHTNESS, 0, 255, 1, 180);
-	v4l2_ctrl_new_std(&qcam->hdl, &qcam_ctrl_ops,
-			  V4L2_CID_CONTRAST, 0, 255, 1, 192);
-	v4l2_ctrl_new_std(&qcam->hdl, &qcam_ctrl_ops,
-			  V4L2_CID_GAMMA, 0, 255, 1, 105);
-	if (qcam->hdl.error) {
-		v4l2_err(v4l2_dev, "couldn't register controls\n");
-		v4l2_ctrl_handler_free(&qcam->hdl);
-		kfree(qcam);
-		return NULL;
-	}
-	qcam->pport = port;
-	qcam->pdev = parport_register_device(port, v4l2_dev->name, NULL, NULL,
-			NULL, 0, NULL);
-	if (qcam->pdev == NULL) {
-		v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
-		v4l2_ctrl_handler_free(&qcam->hdl);
-		kfree(qcam);
-		return NULL;
-	}
-
-	strlcpy(qcam->vdev.name, "Connectix QuickCam", sizeof(qcam->vdev.name));
-	qcam->vdev.v4l2_dev = v4l2_dev;
-	qcam->vdev.ctrl_handler = &qcam->hdl;
-	qcam->vdev.fops = &qcam_fops;
-	qcam->vdev.ioctl_ops = &qcam_ioctl_ops;
-	set_bit(V4L2_FL_USE_FH_PRIO, &qcam->vdev.flags);
-	qcam->vdev.release = video_device_release_empty;
-	video_set_drvdata(&qcam->vdev, qcam);
-
-	mutex_init(&qcam->lock);
-
-	qcam->port_mode = (QC_ANY | QC_NOTSET);
-	qcam->width = 320;
-	qcam->height = 240;
-	qcam->bpp = 4;
-	qcam->transfer_scale = 2;
-	qcam->contrast = 192;
-	qcam->brightness = 180;
-	qcam->whitebal = 105;
-	qcam->top = 1;
-	qcam->left = 14;
-	qcam->mode = -1;
-	qcam->status = QC_PARAM_CHANGE;
-	return qcam;
-}
-
-static int qc_calibrate(struct qcam *q)
-{
-	/*
-	 *	Bugfix by Hanno Mueller hmueller@kabel.de, Mai 21 96
-	 *	The white balance is an individual value for each
-	 *	quickcam.
-	 */
-
-	int value;
-	int count = 0;
-
-	qc_command(q, 27);	/* AutoAdjustOffset */
-	qc_command(q, 0);	/* Dummy Parameter, ignored by the camera */
-
-	/* GetOffset (33) will read 255 until autocalibration */
-	/* is finished. After that, a value of 1-254 will be */
-	/* returned. */
-
-	do {
-		qc_command(q, 33);
-		value = qc_readparam(q);
-		mdelay(1);
-		schedule();
-		count++;
-	} while (value == 0xff && count < 2048);
-
-	q->whitebal = value;
-	return value;
-}
-
-static int init_bwqcam(struct parport *port)
-{
-	struct qcam *qcam;
-
-	if (num_cams == MAX_CAMS) {
-		printk(KERN_ERR "Too many Quickcams (max %d)\n", MAX_CAMS);
-		return -ENOSPC;
-	}
-
-	qcam = qcam_init(port);
-	if (qcam == NULL)
-		return -ENODEV;
-
-	parport_claim_or_block(qcam->pdev);
-
-	qc_reset(qcam);
-
-	if (qc_detect(qcam) == 0) {
-		parport_release(qcam->pdev);
-		parport_unregister_device(qcam->pdev);
-		kfree(qcam);
-		return -ENODEV;
-	}
-	qc_calibrate(qcam);
-	v4l2_ctrl_handler_setup(&qcam->hdl);
-
-	parport_release(qcam->pdev);
-
-	v4l2_info(&qcam->v4l2_dev, "Connectix Quickcam on %s\n", qcam->pport->name);
-
-	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
-		parport_unregister_device(qcam->pdev);
-		kfree(qcam);
-		return -ENODEV;
-	}
-
-	qcams[num_cams++] = qcam;
-
-	return 0;
-}
-
-static void close_bwqcam(struct qcam *qcam)
-{
-	video_unregister_device(&qcam->vdev);
-	v4l2_ctrl_handler_free(&qcam->hdl);
-	parport_unregister_device(qcam->pdev);
-	kfree(qcam);
-}
-
-/* The parport parameter controls which parports will be scanned.
- * Scanning all parports causes some printers to print a garbage page.
- *       -- March 14, 1999  Billy Donahue <billy@escape.com> */
-#ifdef MODULE
-static char *parport[MAX_CAMS] = { NULL, };
-module_param_array(parport, charp, NULL, 0);
-#endif
-
-static int accept_bwqcam(struct parport *port)
-{
-#ifdef MODULE
-	int n;
-
-	if (parport[0] && strncmp(parport[0], "auto", 4) != 0) {
-		/* user gave parport parameters */
-		for (n = 0; n < MAX_CAMS && parport[n]; n++) {
-			char *ep;
-			unsigned long r;
-			r = simple_strtoul(parport[n], &ep, 0);
-			if (ep == parport[n]) {
-				printk(KERN_ERR
-					"bw-qcam: bad port specifier \"%s\"\n",
-					parport[n]);
-				continue;
-			}
-			if (r == port->number)
-				return 1;
-		}
-		return 0;
-	}
-#endif
-	return 1;
-}
-
-static void bwqcam_attach(struct parport *port)
-{
-	if (accept_bwqcam(port))
-		init_bwqcam(port);
-}
-
-static void bwqcam_detach(struct parport *port)
-{
-	int i;
-	for (i = 0; i < num_cams; i++) {
-		struct qcam *qcam = qcams[i];
-		if (qcam && qcam->pdev->port == port) {
-			qcams[i] = NULL;
-			close_bwqcam(qcam);
-		}
-	}
-}
-
-static struct parport_driver bwqcam_driver = {
-	.name	= "bw-qcam",
-	.attach	= bwqcam_attach,
-	.detach	= bwqcam_detach,
-};
-
-static void __exit exit_bw_qcams(void)
-{
-	parport_unregister_driver(&bwqcam_driver);
-}
-
-static int __init init_bw_qcams(void)
-{
-#ifdef MODULE
-	/* Do some sanity checks on the module parameters. */
-	if (maxpoll > 5000) {
-		printk(KERN_INFO "Connectix Quickcam max-poll was above 5000. Using 5000.\n");
-		maxpoll = 5000;
-	}
-
-	if (yieldlines < 1) {
-		printk(KERN_INFO "Connectix Quickcam yieldlines was less than 1. Using 1.\n");
-		yieldlines = 1;
-	}
-#endif
-	return parport_register_driver(&bwqcam_driver);
-}
-
-module_init(init_bw_qcams);
-module_exit(exit_bw_qcams);
-
-MODULE_LICENSE("GPL");
-MODULE_VERSION("0.0.3");