[media] rename most media/video usb drivers to media/usb

Rename all USB drivers with their own directory under
drivers/media/video into drivers/media/usb and update the
building system.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 259 insertions, 0 deletions

diff --git a/drivers/media/usb/gspca/gspca.h b/drivers/media/usb/gspca/gspca.h
new file mode 100644
index 000000000000..dc688c7f5e48
--- /dev/null
+++ b/drivers/media/usb/gspca/gspca.h
@@ -0,0 +1,259 @@
+#ifndef GSPCAV2_H
+#define GSPCAV2_H
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <linux/mutex.h>
+
+/* compilation option */
+/*#define GSPCA_DEBUG 1*/
+
+#ifdef GSPCA_DEBUG
+/* GSPCA our debug messages */
+extern int gspca_debug;
+#define PDEBUG(level, fmt, ...)					\
+do {								\
+	if (gspca_debug & (level))				\
+		pr_info(fmt, ##__VA_ARGS__);			\
+} while (0)
+
+#define D_ERR  0x01
+#define D_PROBE 0x02
+#define D_CONF 0x04
+#define D_STREAM 0x08
+#define D_FRAM 0x10
+#define D_PACK 0x20
+#define D_USBI 0x00
+#define D_USBO 0x00
+#define D_V4L2 0x0100
+#else
+#define PDEBUG(level, fmt, ...)
+#endif
+
+#define GSPCA_MAX_FRAMES 16	/* maximum number of video frame buffers */
+/* image transfers */
+#define MAX_NURBS 4		/* max number of URBs */
+
+
+/* used to list framerates supported by a camera mode (resolution) */
+struct framerates {
+	const u8 *rates;
+	int nrates;
+};
+
+/* control definition */
+struct gspca_ctrl {
+	s16 val;	/* current value */
+	s16 def;	/* default value */
+	s16 min, max;	/* minimum and maximum values */
+};
+
+/* device information - set at probe time */
+struct cam {
+	const struct v4l2_pix_format *cam_mode;	/* size nmodes */
+	const struct framerates *mode_framerates; /* must have size nmodes,
+						   * just like cam_mode */
+	struct gspca_ctrl *ctrls;	/* control table - size nctrls */
+					/* may be NULL */
+	u32 bulk_size;		/* buffer size when image transfer by bulk */
+	u32 input_flags;	/* value for ENUM_INPUT status flags */
+	u8 nmodes;		/* size of cam_mode */
+	u8 no_urb_create;	/* don't create transfer URBs */
+	u8 bulk_nurbs;		/* number of URBs in bulk mode
+				 * - cannot be > MAX_NURBS
+				 * - when 0 and bulk_size != 0 means
+				 *   1 URB and submit done by subdriver */
+	u8 bulk;		/* image transfer by 0:isoc / 1:bulk */
+	u8 npkt;		/* number of packets in an ISOC message
+				 * 0 is the default value: 32 packets */
+	u8 needs_full_bandwidth;/* Set this flag to notify the bandwidth calc.
+				 * code that the cam fills all image buffers to
+				 * the max, even when using compression. */
+};
+
+struct gspca_dev;
+struct gspca_frame;
+
+/* subdriver operations */
+typedef int (*cam_op) (struct gspca_dev *);
+typedef void (*cam_v_op) (struct gspca_dev *);
+typedef int (*cam_cf_op) (struct gspca_dev *, const struct usb_device_id *);
+typedef int (*cam_jpg_op) (struct gspca_dev *,
+				struct v4l2_jpegcompression *);
+typedef int (*cam_reg_op) (struct gspca_dev *,
+				struct v4l2_dbg_register *);
+typedef int (*cam_ident_op) (struct gspca_dev *,
+				struct v4l2_dbg_chip_ident *);
+typedef void (*cam_streamparm_op) (struct gspca_dev *,
+				  struct v4l2_streamparm *);
+typedef int (*cam_qmnu_op) (struct gspca_dev *,
+			struct v4l2_querymenu *);
+typedef void (*cam_pkt_op) (struct gspca_dev *gspca_dev,
+				u8 *data,
+				int len);
+typedef int (*cam_int_pkt_op) (struct gspca_dev *gspca_dev,
+				u8 *data,
+				int len);
+
+struct ctrl {
+	struct v4l2_queryctrl qctrl;
+	int (*set)(struct gspca_dev *, __s32);
+	int (*get)(struct gspca_dev *, __s32 *);
+	cam_v_op set_control;
+};
+
+/* subdriver description */
+struct sd_desc {
+/* information */
+	const char *name;	/* sub-driver name */
+/* controls */
+	const struct ctrl *ctrls;	/* static control definition */
+	int nctrls;
+/* mandatory operations */
+	cam_cf_op config;	/* called on probe */
+	cam_op init;		/* called on probe and resume */
+	cam_op init_controls;	/* called on probe */
+	cam_op start;		/* called on stream on after URBs creation */
+	cam_pkt_op pkt_scan;
+/* optional operations */
+	cam_op isoc_init;	/* called on stream on before getting the EP */
+	cam_op isoc_nego;	/* called when URB submit failed with NOSPC */
+	cam_v_op stopN;		/* called on stream off - main alt */
+	cam_v_op stop0;		/* called on stream off & disconnect - alt 0 */
+	cam_v_op dq_callback;	/* called when a frame has been dequeued */
+	cam_jpg_op get_jcomp;
+	cam_jpg_op set_jcomp;
+	cam_qmnu_op querymenu;
+	cam_streamparm_op get_streamparm;
+	cam_streamparm_op set_streamparm;
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	cam_reg_op set_register;
+	cam_reg_op get_register;
+#endif
+	cam_ident_op get_chip_ident;
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+	cam_int_pkt_op int_pkt_scan;
+	/* other_input makes the gspca core create gspca_dev->input even when
+	   int_pkt_scan is NULL, for cams with non interrupt driven buttons */
+	u8 other_input;
+#endif
+};
+
+/* packet types when moving from iso buf to frame buf */
+enum gspca_packet_type {
+	DISCARD_PACKET,
+	FIRST_PACKET,
+	INTER_PACKET,
+	LAST_PACKET
+};
+
+struct gspca_frame {
+	__u8 *data;			/* frame buffer */
+	int vma_use_count;
+	struct v4l2_buffer v4l2_buf;
+};
+
+struct gspca_dev {
+	struct video_device vdev;	/* !! must be the first item */
+	struct module *module;		/* subdriver handling the device */
+	struct v4l2_device v4l2_dev;
+	struct usb_device *dev;
+	struct file *capt_file;		/* file doing video capture */
+					/* protected by queue_lock */
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+	struct input_dev *input_dev;
+	char phys[64];			/* physical device path */
+#endif
+
+	struct cam cam;				/* device information */
+	const struct sd_desc *sd_desc;		/* subdriver description */
+	unsigned ctrl_dis;		/* disabled controls (bit map) */
+	unsigned ctrl_inac;		/* inactive controls (bit map) */
+	struct v4l2_ctrl_handler ctrl_handler;
+
+	/* autogain and exposure or gain control cluster, these are global as
+	   the autogain/exposure functions in autogain_functions.c use them */
+	struct {
+		struct v4l2_ctrl *autogain;
+		struct v4l2_ctrl *exposure;
+		struct v4l2_ctrl *gain;
+		int exp_too_low_cnt, exp_too_high_cnt;
+	};
+
+#define USB_BUF_SZ 64
+	__u8 *usb_buf;				/* buffer for USB exchanges */
+	struct urb *urb[MAX_NURBS];
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+	struct urb *int_urb;
+#endif
+
+	__u8 *frbuf;				/* buffer for nframes */
+	struct gspca_frame frame[GSPCA_MAX_FRAMES];
+	u8 *image;				/* image beeing filled */
+	__u32 frsz;				/* frame size */
+	u32 image_len;				/* current length of image */
+	atomic_t fr_q;				/* next frame to queue */
+	atomic_t fr_i;				/* frame being filled */
+	signed char fr_queue[GSPCA_MAX_FRAMES];	/* frame queue */
+	char nframes;				/* number of frames */
+	u8 fr_o;				/* next frame to dequeue */
+	__u8 last_packet_type;
+	__s8 empty_packet;		/* if (-1) don't check empty packets */
+	__u8 streaming;			/* protected by both mutexes (*) */
+
+	__u8 curr_mode;			/* current camera mode */
+	__u32 pixfmt;			/* current mode parameters */
+	__u16 width;
+	__u16 height;
+	__u32 sequence;			/* frame sequence number */
+
+	wait_queue_head_t wq;		/* wait queue */
+	struct mutex usb_lock;		/* usb exchange protection */
+	struct mutex queue_lock;	/* ISOC queue protection */
+	int usb_err;			/* USB error - protected by usb_lock */
+	u16 pkt_size;			/* ISOC packet size */
+#ifdef CONFIG_PM
+	char frozen;			/* suspend - resume */
+#endif
+	char present;			/* device connected */
+	char nbufread;			/* number of buffers for read() */
+	char memory;			/* memory type (V4L2_MEMORY_xxx) */
+	__u8 iface;			/* USB interface number */
+	__u8 alt;			/* USB alternate setting */
+	u8 audio;			/* presence of audio device */
+
+	/* (*) These variables are proteced by both usb_lock and queue_lock,
+	   that is any code setting them is holding *both*, which means that
+	   any code getting them needs to hold at least one of them */
+};
+
+int gspca_dev_probe(struct usb_interface *intf,
+		const struct usb_device_id *id,
+		const struct sd_desc *sd_desc,
+		int dev_size,
+		struct module *module);
+int gspca_dev_probe2(struct usb_interface *intf,
+		const struct usb_device_id *id,
+		const struct sd_desc *sd_desc,
+		int dev_size,
+		struct module *module);
+void gspca_disconnect(struct usb_interface *intf);
+void gspca_frame_add(struct gspca_dev *gspca_dev,
+			enum gspca_packet_type packet_type,
+			const u8 *data,
+			int len);
+#ifdef CONFIG_PM
+int gspca_suspend(struct usb_interface *intf, pm_message_t message);
+int gspca_resume(struct usb_interface *intf);
+#endif
+int gspca_expo_autogain(struct gspca_dev *gspca_dev, int avg_lum,
+	int desired_avg_lum, int deadzone, int gain_knee, int exposure_knee);
+int gspca_coarse_grained_expo_autogain(struct gspca_dev *gspca_dev,
+        int avg_lum, int desired_avg_lum, int deadzone);
+
+#endif /* GSPCAV2_H */