[media] em28xx: add support for Hauppauge WinTV-dualHD DVB tuner

Hauppauge WinTV-dualHD is a USB 2.0 dual DVB-T/T2/C tuner with
following components:

USB bridge: Empia EM28274 (chip id is the same as EM28174)
Demodulator: 2x Silicon Labs Si2168-B40
Tuner: 2x Silicon Labs Si2157-A30

This patch adds support only for the first tuner.

The demodulator needs firmware, available for example here:
http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/Si2168-B40/4.0.11/

The demodulators sit on the same I2C bus and their addresses
are 0x64 and 0x67. The tuners are behind the demodulators and
their addresses are 0x60 and 0x63.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

1 files changed, 58 insertions, 0 deletions

diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 57c3b905bf0a..e397f544f108 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -507,6 +507,30 @@ static struct em28xx_reg_seq plex_px_bcud[] = {
 };
 
 /*
+ * 2040:0265 Hauppauge WinTV-dualHD DVB
+ * reg 0x80/0x84:
+ * GPIO_0: Yellow LED tuner 1, 0=on, 1=off
+ * GPIO_1: Green LED tuner 1, 0=on, 1=off
+ * GPIO_2: Yellow LED tuner 2, 0=on, 1=off
+ * GPIO_3: Green LED tuner 2, 0=on, 1=off
+ * GPIO_5: Reset #2, 0=active
+ * GPIO_6: Reset #1, 0=active
+ */
+static struct em28xx_reg_seq hauppauge_dualhd_dvb[] = {
+	{EM2874_R80_GPIO_P0_CTRL,      0xff, 0xff,      0},
+	{0x0d,                         0xff, 0xff,    200},
+	{0x50,                         0x04, 0xff,    300},
+	{EM2874_R80_GPIO_P0_CTRL,      0xbf, 0xff,    100}, /* demod 1 reset */
+	{EM2874_R80_GPIO_P0_CTRL,      0xff, 0xff,    100},
+	{EM2874_R80_GPIO_P0_CTRL,      0xdf, 0xff,    100}, /* demod 2 reset */
+	{EM2874_R80_GPIO_P0_CTRL,      0xff, 0xff,    100},
+	{EM2874_R5F_TS_ENABLE,         0x44, 0xff,     50},
+	{EM2874_R5D_TS1_PKT_SIZE,      0x05, 0xff,     50},
+	{EM2874_R5E_TS2_PKT_SIZE,      0x05, 0xff,     50},
+	{-1,                             -1,   -1,     -1},
+};
+
+/*
  *  Button definitions
  */
 static struct em28xx_button std_snapshot_button[] = {
@@ -585,6 +609,22 @@ static struct em28xx_led terratec_grabby_leds[] = {
 	{-1, 0, 0, 0},
 };
 
+static struct em28xx_led hauppauge_dualhd_leds[] = {
+	{
+		.role      = EM28XX_LED_DIGITAL_CAPTURING,
+		.gpio_reg  = EM2874_R80_GPIO_P0_CTRL,
+		.gpio_mask = EM_GPIO_1,
+		.inverted  = 1,
+	},
+	{
+		.role      = EM28XX_LED_DIGITAL_CAPTURING_TS2,
+		.gpio_reg  = EM2874_R80_GPIO_P0_CTRL,
+		.gpio_mask = EM_GPIO_3,
+		.inverted  = 1,
+	},
+	{-1, 0, 0, 0},
+};
+
 /*
  *  Board definitions
  */
@@ -2334,6 +2374,21 @@ struct em28xx_board em28xx_boards[] = {
 		.tuner_gpio    = plex_px_bcud,
 		.has_dvb       = 1,
 	},
+	/*
+	 * 2040:0265 Hauppauge WinTV-dualHD (DVB version).
+	 * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157
+	 */
+	[EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = {
+		.name          = "Hauppauge WinTV-dualHD DVB",
+		.def_i2c_bus   = 1,
+		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE |
+				 EM28XX_I2C_FREQ_400_KHZ,
+		.tuner_type    = TUNER_ABSENT,
+		.tuner_gpio    = hauppauge_dualhd_dvb,
+		.has_dvb       = 1,
+		.ir_codes      = RC_MAP_HAUPPAUGE,
+		.leds          = hauppauge_dualhd_leds,
+	},
 };
 EXPORT_SYMBOL_GPL(em28xx_boards);
 
@@ -2457,6 +2512,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
 	{ USB_DEVICE(0x2040, 0x651f),
 			.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
+	{ USB_DEVICE(0x2040, 0x0265),
+			.driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
 	{ USB_DEVICE(0x0438, 0xb002),
 			.driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
 	{ USB_DEVICE(0x2001, 0xf112),
@@ -2891,6 +2948,7 @@ static void em28xx_card_setup(struct em28xx *dev)
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
+	case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB:
 	{
 		struct tveeprom tv;