[media] cx231xx: Add digital support for HVR 930c-HD model 1113xx

Add support for:
	[2040:b130] Hauppauge WinTV 930C-HD (model 1113xx)

After loading the driver the first open to dvb device node fails.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

1 files changed, 92 insertions, 0 deletions

diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index db69307d86ae..5dd185e629cd 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -704,6 +704,45 @@ struct cx231xx_board cx231xx_boards[] = {
 			}
 		},
 	},
+	[CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx] = {
+		.name = "Hauppauge WinTV 930C-HD (1113xx)",
+		.tuner_type = TUNER_NXP_TDA18271,
+		.tuner_addr = 0x60,
+		.tuner_gpio = RDE250_XCV_TUNER,
+		.tuner_sif_gpio = 0x05,
+		.tuner_scl_gpio = 0x1a,
+		.tuner_sda_gpio = 0x1b,
+		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
+		.demod_xfer_mode = 0,
+		.ctl_pin_status_mask = 0xFFFFFFC4,
+		.agc_analog_digital_select_gpio = 0x0c,
+		.gpio_pin_status_mask = 0x4001000,
+		.tuner_i2c_master = 1,
+		.demod_i2c_master = 2,
+		.has_dvb = 1,
+		.demod_addr = 0x0e,
+		.norm = V4L2_STD_PAL,
+
+		.input = {{
+			.type = CX231XX_VMUX_TELEVISION,
+			.vmux = CX231XX_VIN_3_1,
+			.amux = CX231XX_AMUX_VIDEO,
+			.gpio = NULL,
+		}, {
+			.type = CX231XX_VMUX_COMPOSITE1,
+			.vmux = CX231XX_VIN_2_1,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = NULL,
+		}, {
+			.type = CX231XX_VMUX_SVIDEO,
+			.vmux = CX231XX_VIN_1_1 |
+				(CX231XX_VIN_1_2 << 8) |
+				CX25840_SVIDEO_ON,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = NULL,
+		} },
+	},
 };
 const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
 
@@ -733,6 +772,8 @@ struct usb_device_id cx231xx_id_table[] = {
 	 .driver_info = CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC},
 	{USB_DEVICE(0x2040, 0xb120),
 	 .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
+	{USB_DEVICE(0x2040, 0xb130),
+	 .driver_info = CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx},
 	{USB_DEVICE(0x2040, 0xb140),
 	 .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
 	{USB_DEVICE(0x2040, 0xc200),
@@ -886,6 +927,43 @@ static void cx231xx_config_tuner(struct cx231xx *dev)
 
 }
 
+static int read_eeprom(struct cx231xx *dev, u8 *eedata, int len)
+{
+	int ret = 0;
+	u8 addr = 0xa0 >> 1;
+	u8 start_offset = 0;
+	int len_todo = len;
+	u8 *eedata_cur = eedata;
+	int i;
+	struct i2c_msg msg_write = { .addr = addr, .flags = 0,
+		.buf = &start_offset, .len = 1 };
+	struct i2c_msg msg_read = { .addr = addr, .flags = I2C_M_RD };
+
+	/* mutex_lock(&dev->i2c_lock); */
+	cx231xx_enable_i2c_port_3(dev, false);
+
+	/* start reading at offset 0 */
+	ret = i2c_transfer(&dev->i2c_bus[1].i2c_adap, &msg_write, 1);
+
+	while (len_todo > 0) {
+		msg_read.len = (len_todo > 64) ? 64 : len_todo;
+		msg_read.buf = eedata_cur;
+
+		ret = i2c_transfer(&dev->i2c_bus[1].i2c_adap, &msg_read, 1);
+
+		eedata_cur += msg_read.len;
+		len_todo -= msg_read.len;
+	}
+
+	cx231xx_enable_i2c_port_3(dev, true);
+	/* mutex_unlock(&dev->i2c_lock); */
+
+	for (i = 0; i + 15 < len; i += 16)
+		cx231xx_info("i2c eeprom %02x: %*ph\n", i, 16, &eedata[i]);
+
+	return 0;
+}
+
 void cx231xx_card_setup(struct cx231xx *dev)
 {
 
@@ -917,6 +995,20 @@ void cx231xx_card_setup(struct cx231xx *dev)
 		else
 			cx231xx_config_tuner(dev);
 	}
+
+	switch (dev->model) {
+	case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx:
+		{
+			struct tveeprom tvee;
+			static u8 eeprom[256];
+
+			read_eeprom(dev, eeprom, sizeof(eeprom));
+			tveeprom_hauppauge_analog(&dev->i2c_bus[1].i2c_client,
+						&tvee, eeprom + 0xc0);
+			break;
+		}
+	}
+
 }
 
 /*