[media] ati_remote: add support for Medion X10 Digitainer remote

Add support for another Medion X10 remote. This was apparently
originally used with the Medion Digitainer box, but is now sold
separately without any Digitainer labeling.

A peculiarity of this remote is a scrollwheel in place of up/down
buttons. Each direction is mapped to 8 different scancodes, each
corresponding to 1..8 notches, allowing multiple notches to the same
direction to be transmitted in a single scancode. The driver transforms
the multi-notch scancodes to multiple events of the single-notch
scancode.
(0x70..0x77 = 1..8 notches down, 0x78..0x7f = 1..8 notches up)

Since the scrollwheel scancodes are the same that are used for mouse on
some other X10 (ati_remote) remotes, the driver will now check whether
the active keymap has a keycode defined for the single-notch scancode
when a mouse/scrollwheel scancode (0x70..0x7f) is received. If set,
scrollwheel is assumed, otherwise mouse is assumed.

This remote ships with a different receiver than the already supported
Medion X10 remote, but they share the same USB ID. The only difference
in the USB descriptors is that the Digitainer receiver has the Remote
Wakeup bit set in bmAttributes of the Configuration Descriptor.
Therefore that is used to select the default keymap.

Thanks to Stephan Raue from OpenELEC (www.openelec.tv) for providing me
both a Medion X10 Digitainer remote+receiver and an already supported
Medion X10 remote+receiver. Thanks to Martin Beyss for providing some
useful information about the remote (including the "Digitainer" name).
This patch has been tested by both of them and myself.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Tested-by: Stephan Raue <stephan@openelec.tv>
Tested-by: Martin Beyss <Martin.Beyss@rwth-aachen.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 62 insertions, 28 deletions

diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c
index 7a35f7afad50..26fa043d3de7 100644
--- a/drivers/media/rc/ati_remote.c
+++ b/drivers/media/rc/ati_remote.c
@@ -1,7 +1,7 @@
 /*
  *  USB ATI Remote support
  *
- *                Copyright (c) 2011 Anssi Hannula <anssi.hannula@iki.fi>
+ *                Copyright (c) 2011, 2012 Anssi Hannula <anssi.hannula@iki.fi>
  *  Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
  *  Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev
  *
@@ -157,8 +157,20 @@ struct ati_receiver_type {
 	const char *(*get_default_keymap)(struct usb_interface *interface);
 };
 
+static const char *get_medion_keymap(struct usb_interface *interface)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+
+	/* The receiver shipped with the "Digitainer" variant helpfully has
+	 * a single additional bit set in its descriptor. */
+	if (udev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_WAKEUP)
+		return RC_MAP_MEDION_X10_DIGITAINER;
+
+	return RC_MAP_MEDION_X10;
+}
+
 static const struct ati_receiver_type type_ati		= { .default_keymap = RC_MAP_ATI_X10 };
-static const struct ati_receiver_type type_medion	= { .default_keymap = RC_MAP_MEDION_X10 };
+static const struct ati_receiver_type type_medion	= { .get_default_keymap = get_medion_keymap };
 static const struct ati_receiver_type type_firefly	= { .default_keymap = RC_MAP_SNAPSTREAM_FIREFLY };
 
 static struct usb_device_id ati_remote_table[] = {
@@ -455,6 +467,7 @@ static void ati_remote_input_report(struct urb *urb)
 	int acc;
 	int remote_num;
 	unsigned char scancode;
+	u32 wheel_keycode = KEY_RESERVED;
 	int i;
 
 	/*
@@ -494,26 +507,33 @@ static void ati_remote_input_report(struct urb *urb)
 	 */
 	scancode = data[2] & 0x7f;
 
-	/* Look up event code index in the mouse translation table. */
-	for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
-		if (scancode == ati_remote_tbl[i].data) {
-			index = i;
-			break;
+	dbginfo(&ati_remote->interface->dev,
+		"channel 0x%02x; key data %02x, scancode %02x\n",
+		remote_num, data[2], scancode);
+
+	if (scancode >= 0x70) {
+		/*
+		 * This is either a mouse or scrollwheel event, depending on
+		 * the remote/keymap.
+		 * Get the keycode assigned to scancode 0x78/0x70. If it is
+		 * set, assume this is a scrollwheel up/down event.
+		 */
+		wheel_keycode = rc_g_keycode_from_table(ati_remote->rdev,
+							scancode & 0x78);
+
+		if (wheel_keycode == KEY_RESERVED) {
+			/* scrollwheel was not mapped, assume mouse */
+
+			/* Look up event code index in the mouse translation table. */
+			for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
+				if (scancode == ati_remote_tbl[i].data) {
+					index = i;
+					break;
+				}
+			}
 		}
 	}
 
-	if (index >= 0) {
-		dbginfo(&ati_remote->interface->dev,
-			"channel 0x%02x; mouse data %02x; index %d; keycode %d\n",
-			remote_num, data[2], index, ati_remote_tbl[index].code);
-		if (!dev)
-			return; /* no mouse device */
-	} else
-		dbginfo(&ati_remote->interface->dev,
-			"channel 0x%02x; key data %02x, scancode %02x\n",
-			remote_num, data[2], scancode);
-
-
 	if (index >= 0 && ati_remote_tbl[index].kind == KIND_LITERAL) {
 		input_event(dev, ati_remote_tbl[index].type,
 			ati_remote_tbl[index].code,
@@ -552,15 +572,29 @@ static void ati_remote_input_report(struct urb *urb)
 
 		if (index < 0) {
 			/* Not a mouse event, hand it to rc-core. */
-
-			/*
-			 * We don't use the rc-core repeat handling yet as
-			 * it would cause ghost repeats which would be a
-			 * regression for this driver.
-			 */
-			rc_keydown_notimeout(ati_remote->rdev, scancode,
-					     data[2]);
-			rc_keyup(ati_remote->rdev);
+			int count = 1;
+
+			if (wheel_keycode != KEY_RESERVED) {
+				/*
+				 * This is a scrollwheel event, send the
+				 * scroll up (0x78) / down (0x70) scancode
+				 * repeatedly as many times as indicated by
+				 * rest of the scancode.
+				 */
+				count = (scancode & 0x07) + 1;
+				scancode &= 0x78;
+			}
+
+			while (count--) {
+				/*
+				* We don't use the rc-core repeat handling yet as
+				* it would cause ghost repeats which would be a
+				* regression for this driver.
+				*/
+				rc_keydown_notimeout(ati_remote->rdev, scancode,
+						     data[2]);
+				rc_keyup(ati_remote->rdev);
+			}
 			return;
 		}