[media] radio-raremono: add support for 'Thanko's Raremono' AM/FM/SW USB device

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Dinesh Ram <dinesh.ram@cern.ch>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

3 files changed, 402 insertions, 0 deletions

diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index e92cec6fc480..192f36f2f4aa 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -129,6 +129,20 @@ config USB_KEENE
 	  To compile this driver as a module, choose M here: the
 	  module will be called radio-keene.
 
+config USB_RAREMONO
+	tristate "Thanko's Raremono AM/FM/SW radio support"
+	depends on USB && VIDEO_V4L2
+	---help---
+	  The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc.
+	  It is one of the very few or perhaps the only consumer USB radio device
+	  to receive the AM/FM/SW bands.
+
+	  Say Y here if you want to connect this type of AM/FM/SW receiver
+	  to your computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-raremono.
+
 config USB_MA901
 	tristate "Masterkit MA901 USB FM radio support"
 	depends on USB && VIDEO_V4L2
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index eb1a3a034622..120e791199b2 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_RADIO_TIMBERDALE) += radio-timb.o
 obj-$(CONFIG_RADIO_WL1273) += radio-wl1273.o
 obj-$(CONFIG_RADIO_WL128X) += wl128x/
 obj-$(CONFIG_RADIO_TEA575X) += tea575x.o
+obj-$(CONFIG_USB_RAREMONO) += radio-raremono.o
 
 shark2-objs := radio-shark2.o radio-tea5777.o
 
diff --git a/drivers/media/radio/radio-raremono.c b/drivers/media/radio/radio-raremono.c
new file mode 100644
index 000000000000..7b3bdbb1be73
--- /dev/null
+++ b/drivers/media/radio/radio-raremono.c
@@ -0,0 +1,387 @@
+/*
+ * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <asm/unaligned.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+
+/*
+ * 'Thanko's Raremono' is a Japanese si4734-based AM/FM/SW USB receiver:
+ *
+ * http://www.raremono.jp/product/484.html/
+ *
+ * The USB protocol has been reversed engineered using wireshark, initially
+ * by Dinesh Ram <dinesh.ram@cern.ch> and finished by Hans Verkuil
+ * <hverkuil@xs4all.nl>.
+ *
+ * Sadly the firmware used in this product hides lots of goodies since the
+ * si4734 has more features than are supported by the firmware. Oh well...
+ */
+
+/* driver and module definitions */
+MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>");
+MODULE_DESCRIPTION("Thanko's Raremono AM/FM/SW Receiver USB driver");
+MODULE_LICENSE("GPL v2");
+
+/*
+ * The Device announces itself as Cygnal Integrated Products, Inc.
+ *
+ * The vendor and product IDs (and in fact all other lsusb information as
+ * well) are identical to the si470x Silicon Labs USB FM Radio Reference
+ * Design board, even though this card has a si4734 device. Clearly the
+ * designer of this product never bothered to change the USB IDs.
+ */
+
+/* USB Device ID List */
+static struct usb_device_id usb_raremono_device_table[] = {
+	{USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, usb_raremono_device_table);
+
+#define BUFFER_LENGTH 64
+
+/* Timeout is set to a high value, could probably be reduced. Need more tests */
+#define USB_TIMEOUT 10000
+
+/* Frequency limits in KHz */
+#define FM_FREQ_RANGE_LOW	64000
+#define FM_FREQ_RANGE_HIGH	108000
+
+#define AM_FREQ_RANGE_LOW	520
+#define AM_FREQ_RANGE_HIGH	1710
+
+#define SW_FREQ_RANGE_LOW	2300
+#define SW_FREQ_RANGE_HIGH	26100
+
+enum { BAND_FM, BAND_AM, BAND_SW };
+
+static const struct v4l2_frequency_band bands[] = {
+	/* Band FM */
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 0,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+			      V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   = FM_FREQ_RANGE_LOW * 16,
+		.rangehigh  = FM_FREQ_RANGE_HIGH * 16,
+		.modulation = V4L2_BAND_MODULATION_FM,
+	},
+	/* Band AM */
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 1,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   = AM_FREQ_RANGE_LOW * 16,
+		.rangehigh  = AM_FREQ_RANGE_HIGH * 16,
+		.modulation = V4L2_BAND_MODULATION_AM,
+	},
+	/* Band SW */
+	{
+		.type = V4L2_TUNER_RADIO,
+		.index = 2,
+		.capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS,
+		.rangelow   = SW_FREQ_RANGE_LOW * 16,
+		.rangehigh  = SW_FREQ_RANGE_HIGH * 16,
+		.modulation = V4L2_BAND_MODULATION_AM,
+	},
+};
+
+struct raremono_device {
+	struct usb_device *usbdev;
+	struct usb_interface *intf;
+	struct video_device vdev;
+	struct v4l2_device v4l2_dev;
+	struct mutex lock;
+
+	u8 *buffer;
+	u32 band;
+	unsigned curfreq;
+};
+
+static inline struct raremono_device *to_raremono_dev(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct raremono_device, v4l2_dev);
+}
+
+/* Set frequency. */
+static int raremono_cmd_main(struct raremono_device *radio, unsigned band, unsigned freq)
+{
+	unsigned band_offset;
+	int ret;
+
+	switch (band) {
+	case BAND_FM:
+		band_offset = 1;
+		freq /= 10;
+		break;
+	case BAND_AM:
+		band_offset = 0;
+		break;
+	default:
+		band_offset = 2;
+		break;
+	}
+	radio->buffer[0] = 0x04 + band_offset;
+	radio->buffer[1] = freq >> 8;
+	radio->buffer[2] = freq & 0xff;
+
+	ret = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0),
+			HID_REQ_SET_REPORT,
+			USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+			0x0300 + radio->buffer[0], 2,
+			radio->buffer, 3, USB_TIMEOUT);
+
+	if (ret < 0) {
+		dev_warn(radio->v4l2_dev.dev, "%s failed (%d)\n", __func__, ret);
+		return ret;
+	}
+	radio->curfreq = (band == BAND_FM) ? freq * 10 : freq;
+	return 0;
+}
+
+/* Handle unplugging the device.
+ * We call video_unregister_device in any case.
+ * The last function called in this procedure is
+ * usb_raremono_device_release.
+ */
+static void usb_raremono_disconnect(struct usb_interface *intf)
+{
+	struct raremono_device *radio = to_raremono_dev(usb_get_intfdata(intf));
+
+	dev_info(&intf->dev, "Thanko's Raremono disconnected\n");
+
+	mutex_lock(&radio->lock);
+	usb_set_intfdata(intf, NULL);
+	video_unregister_device(&radio->vdev);
+	v4l2_device_disconnect(&radio->v4l2_dev);
+	mutex_unlock(&radio->lock);
+	v4l2_device_put(&radio->v4l2_dev);
+}
+
+/*
+ * Linux Video interface
+ */
+static int vidioc_querycap(struct file *file, void *priv,
+					struct v4l2_capability *v)
+{
+	struct raremono_device *radio = video_drvdata(file);
+
+	strlcpy(v->driver, "radio-raremono", sizeof(v->driver));
+	strlcpy(v->card, "Thanko's Raremono", sizeof(v->card));
+	usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
+	v->device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+	v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS;
+	return 0;
+}
+
+static int vidioc_enum_freq_bands(struct file *file, void *priv,
+		struct v4l2_frequency_band *band)
+{
+	if (band->tuner != 0)
+		return -EINVAL;
+
+	if (band->index >= ARRAY_SIZE(bands))
+		return -EINVAL;
+
+	*band = bands[band->index];
+
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+		struct v4l2_tuner *v)
+{
+	struct raremono_device *radio = video_drvdata(file);
+	int ret;
+
+	if (v->index > 0)
+		return -EINVAL;
+
+	strlcpy(v->name, "AM/FM/SW", sizeof(v->name));
+	v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO |
+		V4L2_TUNER_CAP_FREQ_BANDS;
+	v->rangelow = AM_FREQ_RANGE_LOW * 16;
+	v->rangehigh = FM_FREQ_RANGE_HIGH * 16;
+	v->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
+	v->audmode = (radio->curfreq < FM_FREQ_RANGE_LOW) ?
+		V4L2_TUNER_MODE_MONO : V4L2_TUNER_MODE_STEREO;
+	memset(radio->buffer, 1, BUFFER_LENGTH);
+	ret = usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+			1, 0xa1, 0x030d, 2, radio->buffer, BUFFER_LENGTH, USB_TIMEOUT);
+
+	if (ret < 0) {
+		dev_warn(radio->v4l2_dev.dev, "%s failed (%d)\n", __func__, ret);
+		return ret;
+	}
+	v->signal = ((radio->buffer[1] & 0xf) << 8 | radio->buffer[2]) << 4;
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+					const struct v4l2_tuner *v)
+{
+	return v->index ? -EINVAL : 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *f)
+{
+	struct raremono_device *radio = video_drvdata(file);
+	u32 freq = f->frequency;
+	unsigned band;
+
+	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+
+	if (f->frequency >= (FM_FREQ_RANGE_LOW + SW_FREQ_RANGE_HIGH) * 8)
+		band = BAND_FM;
+	else if (f->frequency <= (AM_FREQ_RANGE_HIGH + SW_FREQ_RANGE_LOW) * 8)
+		band = BAND_AM;
+	else
+		band = BAND_SW;
+
+	freq = clamp_t(u32, f->frequency, bands[band].rangelow, bands[band].rangehigh);
+	return raremono_cmd_main(radio, band, freq / 16);
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct raremono_device *radio = video_drvdata(file);
+
+	if (f->tuner != 0)
+		return -EINVAL;
+	f->type = V4L2_TUNER_RADIO;
+	f->frequency = radio->curfreq * 16;
+	return 0;
+}
+
+/* File system interface */
+static const struct v4l2_file_operations usb_raremono_fops = {
+	.owner		= THIS_MODULE,
+	.open           = v4l2_fh_open,
+	.release        = v4l2_fh_release,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops usb_raremono_ioctl_ops = {
+	.vidioc_querycap = vidioc_querycap,
+	.vidioc_g_tuner = vidioc_g_tuner,
+	.vidioc_s_tuner = vidioc_s_tuner,
+	.vidioc_g_frequency = vidioc_g_frequency,
+	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_enum_freq_bands = vidioc_enum_freq_bands,
+};
+
+/* check if the device is present and register with v4l and usb if it is */
+static int usb_raremono_probe(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	struct raremono_device *radio;
+	int retval = 0;
+
+	radio = devm_kzalloc(&intf->dev, sizeof(struct raremono_device), GFP_KERNEL);
+	if (radio)
+		radio->buffer = devm_kmalloc(&intf->dev, BUFFER_LENGTH, GFP_KERNEL);
+
+	if (!radio || !radio->buffer)
+		return -ENOMEM;
+
+	radio->usbdev = interface_to_usbdev(intf);
+	radio->intf = intf;
+
+	/*
+	 * This device uses the same USB IDs as the si470x SiLabs reference
+	 * design. So do an additional check: attempt to read the device ID
+	 * from the si470x: the lower 12 bits are 0x0242 for the si470x. The
+	 * Raremono always returns 0x0800 (the meaning of that is unknown, but
+	 * at least it works).
+	 *
+	 * We use this check to determine which device we are dealing with.
+	 */
+	msleep(20);
+	retval = usb_control_msg(radio->usbdev,
+		usb_rcvctrlpipe(radio->usbdev, 0),
+		HID_REQ_GET_REPORT,
+		USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+		1, 2,
+		radio->buffer, 3, 500);
+	if (retval != 3 ||
+	    (get_unaligned_be16(&radio->buffer[1]) & 0xfff) == 0x0242) {
+		dev_info(&intf->dev, "this is not Thanko's Raremono.\n");
+		return -ENODEV;
+	}
+
+	dev_info(&intf->dev, "Thanko's Raremono connected: (%04X:%04X)\n",
+			id->idVendor, id->idProduct);
+
+	retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev);
+	if (retval < 0) {
+		dev_err(&intf->dev, "couldn't register v4l2_device\n");
+		return retval;
+	}
+
+	mutex_init(&radio->lock);
+
+	strlcpy(radio->vdev.name, radio->v4l2_dev.name,
+		sizeof(radio->vdev.name));
+	radio->vdev.v4l2_dev = &radio->v4l2_dev;
+	radio->vdev.fops = &usb_raremono_fops;
+	radio->vdev.ioctl_ops = &usb_raremono_ioctl_ops;
+	radio->vdev.lock = &radio->lock;
+	radio->vdev.release = video_device_release_empty;
+
+	usb_set_intfdata(intf, &radio->v4l2_dev);
+
+	video_set_drvdata(&radio->vdev, radio);
+	set_bit(V4L2_FL_USE_FH_PRIO, &radio->vdev.flags);
+
+	raremono_cmd_main(radio, BAND_FM, 95160);
+
+	retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO, -1);
+	if (retval == 0) {
+		dev_info(&intf->dev, "V4L2 device registered as %s\n",
+				video_device_node_name(&radio->vdev));
+		return 0;
+	}
+	dev_err(&intf->dev, "could not register video device\n");
+	v4l2_device_unregister(&radio->v4l2_dev);
+	return retval;
+}
+
+/* USB subsystem interface */
+static struct usb_driver usb_raremono_driver = {
+	.name			= "radio-raremono",
+	.probe			= usb_raremono_probe,
+	.disconnect		= usb_raremono_disconnect,
+	.id_table		= usb_raremono_device_table,
+};
+
+module_usb_driver(usb_raremono_driver);