Merge tag 'v3.13' into for-3.15

Linux 3.13

Conflicts:
	include/net/xfrm.h

Simple merge where v3.13 removed 'extern' from definitions and the audit
tree did s/u32/unsigned int/ to the same definitions.

1 files changed, 10 insertions, 8 deletions

diff --git a/drivers/media/pci/cx25821/cx25821-medusa-video.c b/drivers/media/pci/cx25821/cx25821-medusa-video.c
index 22fa04415ccc..43bdfa4dfba1 100644
--- a/drivers/media/pci/cx25821/cx25821-medusa-video.c
+++ b/drivers/media/pci/cx25821/cx25821-medusa-video.c
@@ -438,7 +438,7 @@ void medusa_set_resolution(struct cx25821_dev *dev, int width,
 		decoder_count = decoder_select + 1;
 	} else {
 		decoder = 0;
-		decoder_count = _num_decoders;
+		decoder_count = dev->_max_num_decoders;
 	}
 
 	switch (width) {
@@ -506,8 +506,6 @@ static void medusa_set_decoderduration(struct cx25821_dev *dev, int decoder,
 		break;
 	}
 
-	_display_field_cnt[decoder] = duration;
-
 	/* update hardware */
 	fld_cnt = cx25821_i2c_read(&dev->i2c_bus[0], disp_cnt_reg, &tmp);
 
@@ -667,8 +665,6 @@ int medusa_video_init(struct cx25821_dev *dev)
 	int ret_val = 0;
 	int i = 0;
 
-	_num_decoders = dev->_max_num_decoders;
-
 	/* disable Auto source selection on all video decoders */
 	value = cx25821_i2c_read(&dev->i2c_bus[0], MON_A_CTRL, &tmp);
 	value &= 0xFFFFF0FF;
@@ -685,8 +681,14 @@ int medusa_video_init(struct cx25821_dev *dev)
 	if (ret_val < 0)
 		goto error;
 
-	for (i = 0; i < _num_decoders; i++)
-		medusa_set_decoderduration(dev, i, _display_field_cnt[i]);
+	/*
+	 * FIXME: due to a coding bug the duration was always 0. It's
+	 * likely that it really should be something else, but due to the
+	 * lack of documentation I have no idea what it should be. For
+	 * now just fill in 0 as the duration.
+	 */
+	for (i = 0; i < dev->_max_num_decoders; i++)
+		medusa_set_decoderduration(dev, i, 0);
 
 	/* Select monitor as DENC A input, power up the DAC */
 	value = cx25821_i2c_read(&dev->i2c_bus[0], DENC_AB_CTRL, &tmp);
@@ -717,7 +719,7 @@ int medusa_video_init(struct cx25821_dev *dev)
 	/* Turn on all of the data out and control output pins. */
 	value = cx25821_i2c_read(&dev->i2c_bus[0], PIN_OE_CTRL, &tmp);
 	value &= 0xFEF0FE00;
-	if (_num_decoders == MAX_DECODERS) {
+	if (dev->_max_num_decoders == MAX_DECODERS) {
 		/*
 		 * Note: The octal board does not support control pins(bit16-19)
 		 * These bits are ignored in the octal board.