Merge tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Some documentation updates and a few new pixel formats

 - Stop btcx-risc abuse by cx88 and move it to bt8xx driver

 - New platform driver: am437x

 - New webcam driver: toptek

 - New remote controller hardware protocols added to img-ir driver

 - Removal of a few very old drivers that relies on old kABIs and are
   for very hard to find hardware: parallel port webcam drivers
   (bw-qcam, c-cam, pms and w9966), tlg2300, Video In/Out for SGI (vino)

 - Removal of the USB Telegent driver (tlg2300).  The company that
   developed this driver has long gone and the hardware is hard to find.
   As it relies on a legacy set of kABI symbols and nobody seems to care
   about it, remove it.

 - several improvements at rtl2832 driver

 - conversion on cx28521 and au0828 to use videobuf2 (VB2)

 - several improvements, fixups and board additions

* tag 'media/v3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits)
  [media] dvb_net: Convert local hex dump to print_hex_dump_debug
  [media] dvb_net: Use standard debugging facilities
  [media] dvb_net: Use vsprintf %pM extension to print Ethernet addresses
  [media] staging: lirc_serial: adjust boolean assignments
  [media] stb0899: use sign_extend32() for sign extension
  [media] si2168: add support for 1.7MHz bandwidth
  [media] si2168: return error if set_frontend is called with invalid parameters
  [media] lirc_dev: avoid potential null-dereference
  [media] mn88472: simplify bandwidth registers setting code
  [media] dvb: tc90522: re-add symbol-rate report
  [media] lmedm04: add read snr, signal strength and ber call backs
  [media] lmedm04: Create frontend call back for read status
  [media] lmedm04: create frontend callbacks for signal/snr/ber/ucblocks
  [media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb
  [media] lmedm04: Increase Interupt due time to 200 msec
  [media] cx88-dvb: whitespace cleanup
  [media] rtl28xxu: properly initialize pdata
  [media] rtl2832: declare functions as static
  [media] rtl2830: declare functions as static
  [media] rtl2832_sdr: add kernel-doc comments for platform_data
  ...

1 files changed, 11 insertions, 13 deletions

diff --git a/drivers/media/i2c/smiapp/smiapp-quirk.h b/drivers/media/i2c/smiapp/smiapp-quirk.h
index 46e9ea8bfa08..dac5566a2f7a 100644
--- a/drivers/media/i2c/smiapp/smiapp-quirk.h
+++ b/drivers/media/i2c/smiapp/smiapp-quirk.h
@@ -14,12 +14,6 @@
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
  */
 
 #ifndef __SMIAPP_QUIRK__
@@ -35,6 +29,9 @@ struct smiapp_sensor;
  * @post_poweron: Called always after the sensor has been fully powered on.
  * @pre_streamon: Called just before streaming is enabled.
  * @post_streamon: Called right after stopping streaming.
+ * @pll_flags: Return flags for the PLL calculator.
+ * @init: Quirk initialisation, called the last in probe(). This is
+ *	  also appropriate for adding sensor specific controls, for instance.
  * @reg_access: Register access quirk. The quirk may divert the access
  *		to another register, or no register at all.
  *
@@ -53,6 +50,7 @@ struct smiapp_quirk {
 	int (*pre_streamon)(struct smiapp_sensor *sensor);
 	int (*post_streamoff)(struct smiapp_sensor *sensor);
 	unsigned long (*pll_flags)(struct smiapp_sensor *sensor);
+	int (*init)(struct smiapp_sensor *sensor);
 	int (*reg_access)(struct smiapp_sensor *sensor, bool write, u32 *reg,
 			  u32 *val);
 	unsigned long flags;
@@ -74,14 +72,14 @@ void smiapp_replace_limit(struct smiapp_sensor *sensor,
 		.val = _val,		\
 	}
 
-#define smiapp_call_quirk(_sensor, _quirk, ...)				\
-	(_sensor->minfo.quirk &&					\
-	 _sensor->minfo.quirk->_quirk ?					\
-	 _sensor->minfo.quirk->_quirk(_sensor, ##__VA_ARGS__) : 0)
+#define smiapp_call_quirk(sensor, _quirk, ...)				\
+	((sensor)->minfo.quirk &&					\
+	 (sensor)->minfo.quirk->_quirk ?				\
+	 (sensor)->minfo.quirk->_quirk(sensor, ##__VA_ARGS__) : 0)
 
-#define smiapp_needs_quirk(_sensor, _quirk)		\
-	(_sensor->minfo.quirk ?				\
-	 _sensor->minfo.quirk->flags & _quirk : 0)
+#define smiapp_needs_quirk(sensor, _quirk)		\
+	((sensor)->minfo.quirk ?			\
+	 (sensor)->minfo.quirk->flags & _quirk : 0)
 
 extern const struct smiapp_quirk smiapp_jt8ev1_quirk;
 extern const struct smiapp_quirk smiapp_imx125es_quirk;