[media] move i2c files into drivers/media/i2c

Move ancillary I2C drivers into drivers/media/i2c, in order to
better organize them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 566 insertions, 0 deletions

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
new file mode 100644
index 000000000000..1c677f5e3a1a
--- /dev/null
+++ b/drivers/media/i2c/Kconfig
@@ -0,0 +1,566 @@
+#
+# Generic video config states
+#
+
+config VIDEO_BTCX
+	depends on PCI
+	tristate
+
+config VIDEO_TVEEPROM
+	tristate
+	depends on I2C
+
+#
+# Multimedia Video device configuration
+#
+
+if VIDEO_V4L2
+
+config VIDEO_HELPER_CHIPS_AUTO
+	bool "Autoselect pertinent encoders/decoders and other helper chips"
+	default y if !EXPERT
+	---help---
+	  Most video cards may require additional modules to encode or
+	  decode audio/video standards. This option will autoselect
+	  all pertinent modules to each selected video module.
+
+	  Unselect this only if you know exactly what you are doing, since
+	  it may break support on some boards.
+
+	  In doubt, say Y.
+
+config VIDEO_IR_I2C
+	tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
+	depends on I2C && RC_CORE
+	default y
+	---help---
+	  Most boards have an IR chip directly connected via GPIO. However,
+	  some video boards have the IR connected via I2C bus.
+
+	  If your board doesn't have an I2C IR chip, you may disable this
+	  option.
+
+	  In doubt, say Y.
+
+#
+# Encoder / Decoder module configuration
+#
+
+menu "Encoders, decoders, sensors and other helper chips"
+	visible if !VIDEO_HELPER_CHIPS_AUTO
+
+comment "Audio decoders, processors and mixers"
+
+config VIDEO_TVAUDIO
+	tristate "Simple audio decoder chips"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for several audio decoder chips found on some bt8xx boards:
+	  Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
+		   tea6320, tea6420, tda8425, ta8874z.
+	  Microchip: pic16c54 based design on ProVideo PV951 board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tvaudio.
+
+config VIDEO_TDA7432
+	tristate "Philips TDA7432 audio processor"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for tda7432 audio decoder chip found on some bt8xx boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tda7432.
+
+config VIDEO_TDA9840
+	tristate "Philips TDA9840 audio processor"
+	depends on I2C
+	---help---
+	  Support for tda9840 audio decoder chip found on some Zoran boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tda9840.
+
+config VIDEO_TEA6415C
+	tristate "Philips TEA6415C audio processor"
+	depends on I2C
+	---help---
+	  Support for tea6415c audio decoder chip found on some bt8xx boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tea6415c.
+
+config VIDEO_TEA6420
+	tristate "Philips TEA6420 audio processor"
+	depends on I2C
+	---help---
+	  Support for tea6420 audio decoder chip found on some bt8xx boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tea6420.
+
+config VIDEO_MSP3400
+	tristate "Micronas MSP34xx audio decoders"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Micronas MSP34xx series of audio decoders.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called msp3400.
+
+config VIDEO_CS5345
+	tristate "Cirrus Logic CS5345 audio ADC"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Cirrus Logic CS5345 24-bit, 192 kHz
+	  stereo A/D converter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cs5345.
+
+config VIDEO_CS53L32A
+	tristate "Cirrus Logic CS53L32A audio ADC"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Cirrus Logic CS53L32A low voltage
+	  stereo A/D converter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cs53l32a.
+
+config VIDEO_TLV320AIC23B
+	tristate "Texas Instruments TLV320AIC23B audio codec"
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+	---help---
+	  Support for the Texas Instruments TLV320AIC23B audio codec.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tlv320aic23b.
+
+config VIDEO_WM8775
+	tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Wolfson Microelectronics WM8775 high
+	  performance stereo A/D Converter with a 4 channel input mixer.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wm8775.
+
+config VIDEO_WM8739
+	tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Wolfson Microelectronics WM8739
+	  stereo A/D Converter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wm8739.
+
+config VIDEO_VP27SMPX
+	tristate "Panasonic VP27s internal MPX"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the internal MPX of the Panasonic VP27s tuner.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vp27smpx.
+
+comment "RDS decoders"
+
+config VIDEO_SAA6588
+	tristate "SAA6588 Radio Chip RDS decoder support"
+	depends on VIDEO_V4L2 && I2C
+
+	help
+	  Support for this Radio Data System (RDS) decoder. This allows
+	  seeing radio station identification transmitted using this
+	  standard.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa6588.
+
+comment "Video decoders"
+
+config VIDEO_ADV7180
+	tristate "Analog Devices ADV7180 decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Analog Devices ADV7180 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7180.
+
+config VIDEO_ADV7183
+	tristate "Analog Devices ADV7183 decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  V4l2 subdevice driver for the Analog Devices
+	  ADV7183 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7183.
+
+config VIDEO_BT819
+	tristate "BT819A VideoStream decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for BT819A video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bt819.
+
+config VIDEO_BT856
+	tristate "BT856 VideoStream decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for BT856 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bt856.
+
+config VIDEO_BT866
+	tristate "BT866 VideoStream decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for BT866 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bt866.
+
+config VIDEO_KS0127
+	tristate "KS0127 video decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for KS0127 video decoder.
+
+	  This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
+	  cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ks0127.
+
+config VIDEO_SAA7110
+	tristate "Philips SAA7110 video decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Philips SAA7110 video decoders.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7110.
+
+config VIDEO_SAA711X
+	tristate "Philips SAA7111/3/4/5 video decoders"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Philips SAA7111/3/4/5 video decoders.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7115.
+
+config VIDEO_SAA7191
+	tristate "Philips SAA7191 video decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Philips SAA7191 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7191.
+
+config VIDEO_TVP514X
+	tristate "Texas Instruments TVP514x video decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
+	  decoder. It is currently working with the TI OMAP3 camera
+	  controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tvp514x.
+
+config VIDEO_TVP5150
+	tristate "Texas Instruments TVP5150 video decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Texas Instruments TVP5150 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tvp5150.
+
+config VIDEO_TVP7002
+	tristate "Texas Instruments TVP7002 video decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Texas Instruments TVP7002 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tvp7002.
+
+config VIDEO_VPX3220
+	tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for VPX322x video decoders.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vpx3220.
+
+comment "Video and audio decoders"
+
+config VIDEO_SAA717X
+	tristate "Philips SAA7171/3/4 audio/video decoders"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Philips SAA7171/3/4 audio/video decoders.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa717x.
+
+source "drivers/media/i2c/cx25840/Kconfig"
+
+comment "MPEG video encoders"
+
+config VIDEO_CX2341X
+	tristate "Conexant CX2341x MPEG encoders"
+	depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
+	---help---
+	  Support for the Conexant CX23416 MPEG encoders
+	  and CX23415 MPEG encoder/decoders.
+
+	  This module currently supports the encoding functions only.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx2341x.
+
+comment "Video encoders"
+
+config VIDEO_SAA7127
+	tristate "Philips SAA7127/9 digital video encoders"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Philips SAA7127/9 digital video encoders.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7127.
+
+config VIDEO_SAA7185
+	tristate "Philips SAA7185 video encoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Philips SAA7185 video encoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7185.
+
+config VIDEO_ADV7170
+	tristate "Analog Devices ADV7170 video encoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Analog Devices ADV7170 video encoder driver
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7170.
+
+config VIDEO_ADV7175
+	tristate "Analog Devices ADV7175 video encoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Analog Devices ADV7175 video encoder driver
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7175.
+
+config VIDEO_ADV7343
+	tristate "ADV7343 video encoder"
+	depends on I2C
+	help
+	  Support for Analog Devices I2C bus based ADV7343 encoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7343.
+
+config VIDEO_ADV7393
+	tristate "ADV7393 video encoder"
+	depends on I2C
+	help
+	  Support for Analog Devices I2C bus based ADV7393 encoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7393.
+
+config VIDEO_AK881X
+	tristate "AK8813/AK8814 video encoders"
+	depends on I2C
+	help
+	  Video output driver for AKM AK8813 and AK8814 TV encoders
+
+comment "Camera sensor devices"
+
+config VIDEO_APTINA_PLL
+	tristate
+
+config VIDEO_SMIAPP_PLL
+	tristate
+
+config VIDEO_OV7670
+	tristate "OmniVision OV7670 sensor support"
+	depends on I2C && VIDEO_V4L2
+	depends on MEDIA_CAMERA_SUPPORT
+	---help---
+	  This is a Video4Linux2 sensor-level driver for the OmniVision
+	  OV7670 VGA camera.  It currently only works with the M88ALP01
+	  controller.
+
+config VIDEO_VS6624
+	tristate "ST VS6624 sensor support"
+	depends on VIDEO_V4L2 && I2C
+	depends on MEDIA_CAMERA_SUPPORT
+	---help---
+	  This is a Video4Linux2 sensor-level driver for the ST VS6624
+	  camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vs6624.
+
+config VIDEO_MT9M032
+	tristate "MT9M032 camera sensor support"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on MEDIA_CAMERA_SUPPORT
+	select VIDEO_APTINA_PLL
+	---help---
+	  This driver supports MT9M032 camera sensors from Aptina, monochrome
+	  models only.
+
+config VIDEO_MT9P031
+	tristate "Aptina MT9P031 support"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on MEDIA_CAMERA_SUPPORT
+	select VIDEO_APTINA_PLL
+	---help---
+	  This is a Video4Linux2 sensor-level driver for the Aptina
+	  (Micron) mt9p031 5 Mpixel camera.
+
+config VIDEO_MT9T001
+	tristate "Aptina MT9T001 support"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on MEDIA_CAMERA_SUPPORT
+	---help---
+	  This is a Video4Linux2 sensor-level driver for the Aptina
+	  (Micron) mt0t001 3 Mpixel camera.
+
+config VIDEO_MT9V011
+	tristate "Micron mt9v011 sensor support"
+	depends on I2C && VIDEO_V4L2
+	depends on MEDIA_CAMERA_SUPPORT
+	---help---
+	  This is a Video4Linux2 sensor-level driver for the Micron
+	  mt0v011 1.3 Mpixel camera.  It currently only works with the
+	  em28xx driver.
+
+config VIDEO_MT9V032
+	tristate "Micron MT9V032 sensor support"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on MEDIA_CAMERA_SUPPORT
+	---help---
+	  This is a Video4Linux2 sensor-level driver for the Micron
+	  MT9V032 752x480 CMOS sensor.
+
+config VIDEO_TCM825X
+	tristate "TCM825x camera sensor support"
+	depends on I2C && VIDEO_V4L2
+	depends on MEDIA_CAMERA_SUPPORT
+	---help---
+	  This is a driver for the Toshiba TCM825x VGA camera sensor.
+	  It is used for example in Nokia N800.
+
+config VIDEO_SR030PC30
+	tristate "Siliconfile SR030PC30 sensor support"
+	depends on I2C && VIDEO_V4L2
+	depends on MEDIA_CAMERA_SUPPORT
+	---help---
+	  This driver supports SR030PC30 VGA camera from Siliconfile
+
+config VIDEO_NOON010PC30
+	tristate "Siliconfile NOON010PC30 sensor support"
+	depends on I2C && VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_SUBDEV_API
+	depends on MEDIA_CAMERA_SUPPORT
+	---help---
+	  This driver supports NOON010PC30 CIF camera from Siliconfile
+
+source "drivers/media/i2c/m5mols/Kconfig"
+
+config VIDEO_S5K6AA
+	tristate "Samsung S5K6AAFX sensor support"
+	depends on MEDIA_CAMERA_SUPPORT
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	---help---
+	  This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
+	  camera sensor with an embedded SoC image signal processor.
+
+source "drivers/media/i2c/smiapp/Kconfig"
+
+comment "Flash devices"
+
+config VIDEO_ADP1653
+	tristate "ADP1653 flash support"
+	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+	depends on MEDIA_CAMERA_SUPPORT
+	---help---
+	  This is a driver for the ADP1653 flash controller. It is used for
+	  example in Nokia N900.
+
+config VIDEO_AS3645A
+	tristate "AS3645A flash driver support"
+	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+	depends on MEDIA_CAMERA_SUPPORT
+	---help---
+	  This is a driver for the AS3645A and LM3555 flash controllers. It has
+	  build in control for flash, torch and indicator LEDs.
+
+comment "Video improvement chips"
+
+config VIDEO_UPD64031A
+	tristate "NEC Electronics uPD64031A Ghost Reduction"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the NEC Electronics uPD64031A Ghost Reduction
+	  video chip. It is most often found in NTSC TV cards made for
+	  Japan and is used to reduce the 'ghosting' effect that can
+	  be present in analog TV broadcasts.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called upd64031a.
+
+config VIDEO_UPD64083
+	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
+	  separation video chip. It is used to improve the quality of
+	  the colors of a composite signal.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called upd64083.
+
+comment "Miscelaneous helper chips"
+
+config VIDEO_THS7303
+	tristate "THS7303 Video Amplifier"
+	depends on I2C
+	help
+	  Support for TI THS7303 video amplifier
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ths7303.
+
+config VIDEO_M52790
+	tristate "Mitsubishi M52790 A/V switch"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	 Support for the Mitsubishi M52790 A/V switch.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called m52790.
+
+endmenu
+endif