Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

47 files changed, 7215 insertions, 477 deletions

diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index 1d0e4b1ef10c..35d0817126e9 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -68,6 +68,10 @@ comment "Supported FireWire (IEEE 1394) Adapters"
 	depends on DVB_CORE && IEEE1394
 source "drivers/media/dvb/firewire/Kconfig"
 
+comment "Supported Earthsoft PT1 Adapters"
+	depends on DVB_CORE && PCI && I2C
+source "drivers/media/dvb/pt1/Kconfig"
+
 comment "Supported DVB Frontends"
 	depends on DVB_CORE
 source "drivers/media/dvb/frontends/Kconfig"
diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile
index 6092a5bb5a7d..16d262ddb45d 100644
--- a/drivers/media/dvb/Makefile
+++ b/drivers/media/dvb/Makefile
@@ -2,6 +2,6 @@
 # Makefile for the kernel multimedia device drivers.
 #
 
-obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/
+obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ pt1/
 
 obj-$(CONFIG_DVB_FIREDTV)	+= firewire/
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 3750ff48cba1..c37790ad92d0 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -20,6 +20,7 @@
  *
  */
 
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
@@ -1203,7 +1204,7 @@ static unsigned int dvb_dvr_poll(struct file *file, poll_table *wait)
 	return mask;
 }
 
-static struct file_operations dvb_dvr_fops = {
+static const struct file_operations dvb_dvr_fops = {
 	.owner = THIS_MODULE,
 	.read = dvb_dvr_read,
 	.write = dvb_dvr_write,
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index eef6d3616626..91c537bca8ad 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -21,6 +21,7 @@
  *
  */
 
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index d13ebcb0c6b6..ddf639ed2fd8 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -850,6 +850,49 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe,
 	return 0;
 }
 
+static int dvb_frontend_clear_cache(struct dvb_frontend *fe)
+{
+	int i;
+
+	memset(&(fe->dtv_property_cache), 0,
+			sizeof(struct dtv_frontend_properties));
+
+	fe->dtv_property_cache.state = DTV_CLEAR;
+	fe->dtv_property_cache.delivery_system = SYS_UNDEFINED;
+	fe->dtv_property_cache.inversion = INVERSION_AUTO;
+	fe->dtv_property_cache.fec_inner = FEC_AUTO;
+	fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_AUTO;
+	fe->dtv_property_cache.bandwidth_hz = BANDWIDTH_AUTO;
+	fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_AUTO;
+	fe->dtv_property_cache.hierarchy = HIERARCHY_AUTO;
+	fe->dtv_property_cache.symbol_rate = QAM_AUTO;
+	fe->dtv_property_cache.code_rate_HP = FEC_AUTO;
+	fe->dtv_property_cache.code_rate_LP = FEC_AUTO;
+
+	fe->dtv_property_cache.isdbt_partial_reception = -1;
+	fe->dtv_property_cache.isdbt_sb_mode = -1;
+	fe->dtv_property_cache.isdbt_sb_subchannel = -1;
+	fe->dtv_property_cache.isdbt_sb_segment_idx = -1;
+	fe->dtv_property_cache.isdbt_sb_segment_count = -1;
+	fe->dtv_property_cache.isdbt_layer_enabled = 0x7;
+	for (i = 0; i < 3; i++) {
+		fe->dtv_property_cache.layer[i].fec = FEC_AUTO;
+		fe->dtv_property_cache.layer[i].modulation = QAM_AUTO;
+		fe->dtv_property_cache.layer[i].interleaving = -1;
+		fe->dtv_property_cache.layer[i].segment_count = -1;
+	}
+
+	return 0;
+}
+
+#define _DTV_CMD(n, s, b) \
+[n] = { \
+	.name = #n, \
+	.cmd  = n, \
+	.set  = s,\
+	.buffer = b \
+}
+
 static struct dtv_cmds_h dtv_cmds[] = {
 	[DTV_TUNE] = {
 		.name	= "DTV_TUNE",
@@ -949,6 +992,47 @@ static struct dtv_cmds_h dtv_cmds[] = {
 		.cmd	= DTV_TRANSMISSION_MODE,
 		.set	= 1,
 	},
+
+	_DTV_CMD(DTV_ISDBT_PARTIAL_RECEPTION, 1, 0),
+	_DTV_CMD(DTV_ISDBT_SOUND_BROADCASTING, 1, 0),
+	_DTV_CMD(DTV_ISDBT_SB_SUBCHANNEL_ID, 1, 0),
+	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_IDX, 1, 0),
+	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_COUNT, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYER_ENABLED, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_FEC, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_MODULATION, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_SEGMENT_COUNT, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_TIME_INTERLEAVING, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_FEC, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_MODULATION, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_SEGMENT_COUNT, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_TIME_INTERLEAVING, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_FEC, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_MODULATION, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 1, 0),
+
+	_DTV_CMD(DTV_ISDBT_PARTIAL_RECEPTION, 0, 0),
+	_DTV_CMD(DTV_ISDBT_SOUND_BROADCASTING, 0, 0),
+	_DTV_CMD(DTV_ISDBT_SB_SUBCHANNEL_ID, 0, 0),
+	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_IDX, 0, 0),
+	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_COUNT, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYER_ENABLED, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_FEC, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_MODULATION, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_SEGMENT_COUNT, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_TIME_INTERLEAVING, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_FEC, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_MODULATION, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_SEGMENT_COUNT, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_TIME_INTERLEAVING, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_FEC, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_MODULATION, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 0, 0),
+
+	_DTV_CMD(DTV_ISDBS_TS_ID, 1, 0),
+
 	/* Get */
 	[DTV_DISEQC_SLAVE_REPLY] = {
 		.name	= "DTV_DISEQC_SLAVE_REPLY",
@@ -956,6 +1040,7 @@ static struct dtv_cmds_h dtv_cmds[] = {
 		.set	= 0,
 		.buffer	= 1,
 	},
+
 	[DTV_API_VERSION] = {
 		.name	= "DTV_API_VERSION",
 		.cmd	= DTV_API_VERSION,
@@ -1165,14 +1250,21 @@ static void dtv_property_adv_params_sync(struct dvb_frontend *fe)
 	if(c->delivery_system == SYS_ISDBT) {
 		/* Fake out a generic DVB-T request so we pass validation in the ioctl */
 		p->frequency = c->frequency;
-		p->inversion = INVERSION_AUTO;
+		p->inversion = c->inversion;
 		p->u.ofdm.constellation = QAM_AUTO;
 		p->u.ofdm.code_rate_HP = FEC_AUTO;
 		p->u.ofdm.code_rate_LP = FEC_AUTO;
-		p->u.ofdm.bandwidth = BANDWIDTH_AUTO;
 		p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO;
 		p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO;
 		p->u.ofdm.hierarchy_information = HIERARCHY_AUTO;
+		if (c->bandwidth_hz == 8000000)
+			p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ;
+		else if (c->bandwidth_hz == 7000000)
+			p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ;
+		else if (c->bandwidth_hz == 6000000)
+			p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
+		else
+			p->u.ofdm.bandwidth = BANDWIDTH_AUTO;
 	}
 }
 
@@ -1274,6 +1366,65 @@ static int dtv_property_process_get(struct dvb_frontend *fe,
 	case DTV_HIERARCHY:
 		tvp->u.data = fe->dtv_property_cache.hierarchy;
 		break;
+
+	/* ISDB-T Support here */
+	case DTV_ISDBT_PARTIAL_RECEPTION:
+		tvp->u.data = fe->dtv_property_cache.isdbt_partial_reception;
+		break;
+	case DTV_ISDBT_SOUND_BROADCASTING:
+		tvp->u.data = fe->dtv_property_cache.isdbt_sb_mode;
+		break;
+	case DTV_ISDBT_SB_SUBCHANNEL_ID:
+		tvp->u.data = fe->dtv_property_cache.isdbt_sb_subchannel;
+		break;
+	case DTV_ISDBT_SB_SEGMENT_IDX:
+		tvp->u.data = fe->dtv_property_cache.isdbt_sb_segment_idx;
+		break;
+	case DTV_ISDBT_SB_SEGMENT_COUNT:
+		tvp->u.data = fe->dtv_property_cache.isdbt_sb_segment_count;
+		break;
+	case DTV_ISDBT_LAYER_ENABLED:
+		tvp->u.data = fe->dtv_property_cache.isdbt_layer_enabled;
+		break;
+	case DTV_ISDBT_LAYERA_FEC:
+		tvp->u.data = fe->dtv_property_cache.layer[0].fec;
+		break;
+	case DTV_ISDBT_LAYERA_MODULATION:
+		tvp->u.data = fe->dtv_property_cache.layer[0].modulation;
+		break;
+	case DTV_ISDBT_LAYERA_SEGMENT_COUNT:
+		tvp->u.data = fe->dtv_property_cache.layer[0].segment_count;
+		break;
+	case DTV_ISDBT_LAYERA_TIME_INTERLEAVING:
+		tvp->u.data = fe->dtv_property_cache.layer[0].interleaving;
+		break;
+	case DTV_ISDBT_LAYERB_FEC:
+		tvp->u.data = fe->dtv_property_cache.layer[1].fec;
+		break;
+	case DTV_ISDBT_LAYERB_MODULATION:
+		tvp->u.data = fe->dtv_property_cache.layer[1].modulation;
+		break;
+	case DTV_ISDBT_LAYERB_SEGMENT_COUNT:
+		tvp->u.data = fe->dtv_property_cache.layer[1].segment_count;
+		break;
+	case DTV_ISDBT_LAYERB_TIME_INTERLEAVING:
+		tvp->u.data = fe->dtv_property_cache.layer[1].interleaving;
+		break;
+	case DTV_ISDBT_LAYERC_FEC:
+		tvp->u.data = fe->dtv_property_cache.layer[2].fec;
+		break;
+	case DTV_ISDBT_LAYERC_MODULATION:
+		tvp->u.data = fe->dtv_property_cache.layer[2].modulation;
+		break;
+	case DTV_ISDBT_LAYERC_SEGMENT_COUNT:
+		tvp->u.data = fe->dtv_property_cache.layer[2].segment_count;
+		break;
+	case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
+		tvp->u.data = fe->dtv_property_cache.layer[2].interleaving;
+		break;
+	case DTV_ISDBS_TS_ID:
+		tvp->u.data = fe->dtv_property_cache.isdbs_ts_id;
+		break;
 	default:
 		r = -1;
 	}
@@ -1302,10 +1453,8 @@ static int dtv_property_process_set(struct dvb_frontend *fe,
 		/* Reset a cache of data specific to the frontend here. This does
 		 * not effect hardware.
 		 */
+		dvb_frontend_clear_cache(fe);
 		dprintk("%s() Flushing property cache\n", __func__);
-		memset(&fe->dtv_property_cache, 0, sizeof(struct dtv_frontend_properties));
-		fe->dtv_property_cache.state = tvp->cmd;
-		fe->dtv_property_cache.delivery_system = SYS_UNDEFINED;
 		break;
 	case DTV_TUNE:
 		/* interpret the cache of data, build either a traditional frontend
@@ -1371,6 +1520,65 @@ static int dtv_property_process_set(struct dvb_frontend *fe,
 	case DTV_HIERARCHY:
 		fe->dtv_property_cache.hierarchy = tvp->u.data;
 		break;
+
+	/* ISDB-T Support here */
+	case DTV_ISDBT_PARTIAL_RECEPTION:
+		fe->dtv_property_cache.isdbt_partial_reception = tvp->u.data;
+		break;
+	case DTV_ISDBT_SOUND_BROADCASTING:
+		fe->dtv_property_cache.isdbt_sb_mode = tvp->u.data;
+		break;
+	case DTV_ISDBT_SB_SUBCHANNEL_ID:
+		fe->dtv_property_cache.isdbt_sb_subchannel = tvp->u.data;
+		break;
+	case DTV_ISDBT_SB_SEGMENT_IDX:
+		fe->dtv_property_cache.isdbt_sb_segment_idx = tvp->u.data;
+		break;
+	case DTV_ISDBT_SB_SEGMENT_COUNT:
+		fe->dtv_property_cache.isdbt_sb_segment_count = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYER_ENABLED:
+		fe->dtv_property_cache.isdbt_layer_enabled = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERA_FEC:
+		fe->dtv_property_cache.layer[0].fec = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERA_MODULATION:
+		fe->dtv_property_cache.layer[0].modulation = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERA_SEGMENT_COUNT:
+		fe->dtv_property_cache.layer[0].segment_count = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERA_TIME_INTERLEAVING:
+		fe->dtv_property_cache.layer[0].interleaving = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERB_FEC:
+		fe->dtv_property_cache.layer[1].fec = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERB_MODULATION:
+		fe->dtv_property_cache.layer[1].modulation = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERB_SEGMENT_COUNT:
+		fe->dtv_property_cache.layer[1].segment_count = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERB_TIME_INTERLEAVING:
+		fe->dtv_property_cache.layer[1].interleaving = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERC_FEC:
+		fe->dtv_property_cache.layer[2].fec = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERC_MODULATION:
+		fe->dtv_property_cache.layer[2].modulation = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERC_SEGMENT_COUNT:
+		fe->dtv_property_cache.layer[2].segment_count = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
+		fe->dtv_property_cache.layer[2].interleaving = tvp->u.data;
+		break;
+	case DTV_ISDBS_TS_ID:
+		fe->dtv_property_cache.isdbs_ts_id = tvp->u.data;
+		break;
 	default:
 		r = -1;
 	}
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index e176da472d7a..810f07d63246 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -341,6 +341,23 @@ struct dtv_frontend_properties {
 	fe_rolloff_t		rolloff;
 
 	fe_delivery_system_t	delivery_system;
+
+	/* ISDB-T specifics */
+	u8			isdbt_partial_reception;
+	u8			isdbt_sb_mode;
+	u8			isdbt_sb_subchannel;
+	u32			isdbt_sb_segment_idx;
+	u32			isdbt_sb_segment_count;
+	u8			isdbt_layer_enabled;
+	struct {
+	    u8			segment_count;
+	    fe_code_rate_t	fec;
+	    fe_modulation_t	modulation;
+	    u8			interleaving;
+	} layer[3];
+
+	/* ISDB-T specifics */
+	u32			isdbs_ts_id;
 };
 
 struct dvb_frontend {
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 8c9ae0a3a272..0241a7c5c34a 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -63,6 +63,7 @@
 #include <asm/uaccess.h>
 #include <linux/crc32.h>
 #include <linux/mutex.h>
+#include <linux/sched.h>
 
 #include "dvb_demux.h"
 #include "dvb_net.h"
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index 479dd05762a5..94159b90f733 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -447,7 +447,7 @@ static int dvb_uevent(struct device *dev, struct kobj_uevent_env *env)
 	return 0;
 }
 
-static char *dvb_nodename(struct device *dev)
+static char *dvb_devnode(struct device *dev, mode_t *mode)
 {
 	struct dvb_device *dvbdev = dev_get_drvdata(dev);
 
@@ -478,7 +478,7 @@ static int __init init_dvbdev(void)
 		goto error;
 	}
 	dvb_class->dev_uevent = dvb_uevent;
-	dvb_class->nodename = dvb_nodename;
+	dvb_class->devnode = dvb_devnode;
 	return 0;
 
 error:
diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h
index 895e2efca8a9..01fc70484743 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.h
+++ b/drivers/media/dvb/dvb-core/dvbdev.h
@@ -31,10 +31,9 @@
 #define DVB_MAJOR 212
 
 #if defined(CONFIG_DVB_MAX_ADAPTERS) && CONFIG_DVB_MAX_ADAPTERS > 0
-#define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS
+  #define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS
 #else
-#warning invalid CONFIG_DVB_MAX_ADAPTERS value
-#define DVB_MAX_ADAPTERS 8
+  #define DVB_MAX_ADAPTERS 8
 #endif
 
 #define DVB_UNSET (-1)
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 8b8bc04ee980..0e4b97fba384 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -71,6 +71,7 @@ config DVB_USB_DIB0700
 	depends on DVB_USB
 	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
 	select DVB_DIB7000M if !DVB_FE_CUSTOMISE
+	select DVB_DIB8000 if !DVB_FE_CUSTOMISE
 	select DVB_DIB3000MC if !DVB_FE_CUSTOMISE
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
@@ -87,7 +88,7 @@ config DVB_USB_DIB0700
 	  Avermedia and other big and small companies.
 
 	  For an up-to-date list of devices supported by this driver, have a look
-	  on the Linux-DVB Wiki at www.linuxtv.org.
+	  on the LinuxTV Wiki at www.linuxtv.org.
 
 	  Say Y if you own such a device and want to use it. You should build it as
 	  a module.
@@ -315,3 +316,9 @@ config DVB_USB_CE6230
 	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
 	help
 	  Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver
+
+config DVB_USB_FRIIO
+	tristate "Friio ISDB-T USB2.0 Receiver support"
+	depends on DVB_USB
+	help
+	  Say Y here to support the Japanese DTV receiver Friio.
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index f92734ed777a..85b83a43d55d 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -79,6 +79,9 @@ obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o
 dvb-usb-ce6230-objs = ce6230.o
 obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o
 
+dvb-usb-friio-objs = friio.o friio-fe.o
+obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
 # due to tuner-xc3028
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 99cdd0d101ca..cf042b309b46 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -61,10 +61,13 @@ static struct af9013_config af9015_af9013_config[] = {
 
 static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 {
+#define BUF_LEN 63
+#define REQ_HDR_LEN 8 /* send header size */
+#define ACK_HDR_LEN 2 /* rece header size */
 	int act_len, ret;
-	u8 buf[64];
+	u8 buf[BUF_LEN];
 	u8 write = 1;
-	u8 msg_len = 8;
+	u8 msg_len = REQ_HDR_LEN;
 	static u8 seq; /* packet sequence number */
 
 	if (mutex_lock_interruptible(&af9015_usb_mutex) < 0)
@@ -94,7 +97,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 		break;
 	case WRITE_MEMORY:
 		if (((req->addr & 0xff00) == 0xff00) ||
-		    ((req->addr & 0xae00) == 0xae00))
+		    ((req->addr & 0xff00) == 0xae00))
 			buf[0] = WRITE_VIRTUAL_MEMORY;
 	case WRITE_VIRTUAL_MEMORY:
 	case COPY_FIRMWARE:
@@ -107,17 +110,26 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 		goto error_unlock;
 	}
 
+	/* buffer overflow check */
+	if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) ||
+		(!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) {
+		err("too much data; cmd:%d len:%d", req->cmd, req->data_len);
+		ret = -EINVAL;
+		goto error_unlock;
+	}
+
 	/* write requested */
 	if (write) {
-		memcpy(&buf[8], req->data, req->data_len);
+		memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len);
 		msg_len += req->data_len;
 	}
+
 	deb_xfer(">>> ");
 	debug_dump(buf, msg_len, deb_xfer);
 
 	/* send req */
 	ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len,
-	&act_len, AF9015_USB_TIMEOUT);
+		&act_len, AF9015_USB_TIMEOUT);
 	if (ret)
 		err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len);
 	else
@@ -130,10 +142,14 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 	if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB)
 		goto exit_unlock;
 
-	/* receive ack and data if read req */
-	msg_len = 1 + 1 + req->data_len;  /* seq + status + data len */
+	/* write receives seq + status = 2 bytes
+	   read receives seq + status + data = 2 + N bytes */
+	msg_len = ACK_HDR_LEN;
+	if (!write)
+		msg_len += req->data_len;
+
 	ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len,
-			   &act_len, AF9015_USB_TIMEOUT);
+		&act_len, AF9015_USB_TIMEOUT);
 	if (ret) {
 		err("recv bulk message failed:%d", ret);
 		ret = -1;
@@ -159,7 +175,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 
 	/* read request, copy returned data to return buf */
 	if (!write)
-		memcpy(req->data, &buf[2], req->data_len);
+		memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len);
 
 error_unlock:
 exit_unlock:
@@ -369,12 +385,14 @@ static int af9015_init_endpoint(struct dvb_usb_device *d)
 	u8  packet_size;
 	deb_info("%s: USB speed:%d\n", __func__, d->udev->speed);
 
+	/* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0.
+	   We use smaller - about 1/4 from the original, 5 and 87. */
 #define TS_PACKET_SIZE            188
 
-#define TS_USB20_PACKET_COUNT     348
+#define TS_USB20_PACKET_COUNT      87
 #define TS_USB20_FRAME_SIZE       (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT)
 
-#define TS_USB11_PACKET_COUNT      21
+#define TS_USB11_PACKET_COUNT       5
 #define TS_USB11_FRAME_SIZE       (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT)
 
 #define TS_USB20_MAX_PACKET_SIZE  512
@@ -868,13 +886,13 @@ static int af9015_read_config(struct usb_device *udev)
 		/* USB1.1 set smaller buffersize and disable 2nd adapter */
 		if (udev->speed == USB_SPEED_FULL) {
 			af9015_properties[i].adapter[0].stream.u.bulk.buffersize
-				= TS_USB11_MAX_PACKET_SIZE;
+				= TS_USB11_FRAME_SIZE;
 			/* disable 2nd adapter because we don't have
 			   PID-filters */
 			af9015_config.dual_mode = 0;
 		} else {
 			af9015_properties[i].adapter[0].stream.u.bulk.buffersize
-				= TS_USB20_MAX_PACKET_SIZE;
+				= TS_USB20_FRAME_SIZE;
 		}
 	}
 
@@ -1310,7 +1328,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.u = {
 						.bulk = {
 							.buffersize =
-						TS_USB20_MAX_PACKET_SIZE,
+						TS_USB20_FRAME_SIZE,
 						}
 					}
 				},
@@ -1416,7 +1434,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.u = {
 						.bulk = {
 							.buffersize =
-						TS_USB20_MAX_PACKET_SIZE,
+						TS_USB20_FRAME_SIZE,
 						}
 					}
 				},
@@ -1522,7 +1540,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.u = {
 						.bulk = {
 							.buffersize =
-						TS_USB20_MAX_PACKET_SIZE,
+						TS_USB20_FRAME_SIZE,
 						}
 					}
 				},
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 7381aff4dcf6..2ae7f648effe 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -203,11 +203,11 @@ static struct i2c_algorithm anysee_i2c_algo = {
 
 static int anysee_mt352_demod_init(struct dvb_frontend *fe)
 {
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x28 };
-	static u8 reset []         = { RESET,      0x80 };
-	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
-	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0x20 };
-	static u8 gpp_ctl_cfg []   = { GPP_CTL,    0x33 };
+	static u8 clock_config[]   = { CLOCK_CTL,  0x38, 0x28 };
+	static u8 reset[]          = { RESET,      0x80 };
+	static u8 adc_ctl_1_cfg[]  = { ADC_CTL_1,  0x40 };
+	static u8 agc_cfg[]        = { AGC_TARGET, 0x28, 0x20 };
+	static u8 gpp_ctl_cfg[]    = { GPP_CTL,    0x33 };
 	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
 
 	mt352_write(fe, clock_config,   sizeof(clock_config));
@@ -485,7 +485,7 @@ static int anysee_probe(struct usb_interface *intf,
 	return ret;
 }
 
-static struct usb_device_id anysee_table [] = {
+static struct usb_device_id anysee_table[] = {
 	{ USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) },
 	{ USB_DEVICE(USB_VID_AMT,     USB_PID_ANYSEE) },
 	{ }		/* Terminating entry */
@@ -511,7 +511,7 @@ static struct dvb_usb_device_properties anysee_properties = {
 				.endpoint = 0x82,
 				.u = {
 					.bulk = {
-						.buffersize = 512,
+						.buffersize = (16*512),
 					}
 				}
 			},
diff --git a/drivers/media/dvb/dvb-usb/ce6230.c b/drivers/media/dvb/dvb-usb/ce6230.c
index 52badc00e673..3df2045b7d2d 100644
--- a/drivers/media/dvb/dvb-usb/ce6230.c
+++ b/drivers/media/dvb/dvb-usb/ce6230.c
@@ -105,7 +105,7 @@ static int ce6230_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 	int i = 0;
 	struct req_t req;
 	int ret = 0;
-	memset(&req, 0, sizeof(&req));
+	memset(&req, 0, sizeof(req));
 
 	if (num > 2)
 		return -EINVAL;
@@ -274,7 +274,7 @@ static struct dvb_usb_device_properties ce6230_properties = {
 				.endpoint = 0x82,
 				.u = {
 					.bulk = {
-						.buffersize = 512,
+						.buffersize = (16*512),
 					}
 				}
 			},
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index f65591fb7cec..2a53dd096eef 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -663,6 +663,14 @@ static struct zl10353_config cxusb_zl10353_xc3028_config = {
 	.parallel_ts = 1,
 };
 
+static struct zl10353_config cxusb_zl10353_xc3028_config_no_i2c_gate = {
+	.demod_address = 0x0f,
+	.if2 = 45600,
+	.no_tuner = 1,
+	.parallel_ts = 1,
+	.disable_i2c_gate_ctrl = 1,
+};
+
 static struct mt352_config cxusb_mt352_xc3028_config = {
 	.demod_address = 0x0f,
 	.if2 = 4560,
@@ -894,7 +902,7 @@ static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap)
 	cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
 
 	if ((adap->fe = dvb_attach(zl10353_attach,
-				   &cxusb_zl10353_xc3028_config,
+				   &cxusb_zl10353_xc3028_config_no_i2c_gate,
 				   &adap->dev->i2c_adap)) == NULL)
 		return -EIO;
 
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index d1d6f4491403..6bd8951ea02b 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -4,13 +4,14 @@
  *	under the terms of the GNU General Public License as published by the Free
  *	Software Foundation, version 2.
  *
- *  Copyright (C) 2005-7 DiBcom, SA
+ *  Copyright (C) 2005-9 DiBcom, SA et al
  */
 #include "dib0700.h"
 
 #include "dib3000mc.h"
 #include "dib7000m.h"
 #include "dib7000p.h"
+#include "dib8000.h"
 #include "mt2060.h"
 #include "mt2266.h"
 #include "tuner-xc2028.h"
@@ -1098,11 +1099,13 @@ static struct dibx000_agc_config dib7070_agc_config = {
 
 static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
 {
+	deb_info("reset: %d", onoff);
 	return dib7000p_set_gpio(fe, 8, 0, !onoff);
 }
 
 static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
 {
+	deb_info("sleep: %d", onoff);
 	return dib7000p_set_gpio(fe, 9, 0, onoff);
 }
 
@@ -1112,16 +1115,26 @@ static struct dib0070_config dib7070p_dib0070_config[2] = {
 		.reset = dib7070_tuner_reset,
 		.sleep = dib7070_tuner_sleep,
 		.clock_khz = 12000,
-		.clock_pad_drive = 4
+		.clock_pad_drive = 4,
+		.charge_pump = 2,
 	}, {
 		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
 		.reset = dib7070_tuner_reset,
 		.sleep = dib7070_tuner_sleep,
 		.clock_khz = 12000,
-
+		.charge_pump = 2,
 	}
 };
 
+static struct dib0070_config dib7770p_dib0070_config = {
+	 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+	 .reset = dib7070_tuner_reset,
+	 .sleep = dib7070_tuner_sleep,
+	 .clock_khz = 12000,
+	 .clock_pad_drive = 0,
+	 .flip_chip = 1,
+};
+
 static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
 {
 	struct dvb_usb_adapter *adap = fe->dvb->priv;
@@ -1139,6 +1152,45 @@ static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_fronte
 	return state->set_param_save(fe, fep);
 }
 
+static int dib7770_set_param_override(struct dvb_frontend *fe,
+		struct dvb_frontend_parameters *fep)
+{
+	 struct dvb_usb_adapter *adap = fe->dvb->priv;
+	 struct dib0700_adapter_state *state = adap->priv;
+
+	 u16 offset;
+	 u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
+	 switch (band) {
+	 case BAND_VHF:
+		  dib7000p_set_gpio(fe, 0, 0, 1);
+		  offset = 850;
+		  break;
+	 case BAND_UHF:
+	 default:
+		  dib7000p_set_gpio(fe, 0, 0, 0);
+		  offset = 250;
+		  break;
+	 }
+	 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
+	 dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
+	 return state->set_param_save(fe, fep);
+}
+
+static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	 struct dib0700_adapter_state *st = adap->priv;
+	 struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe,
+			 DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	 if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+				 &dib7770p_dib0070_config) == NULL)
+		 return -ENODEV;
+
+	 st->set_param_save = adap->fe->ops.tuner_ops.set_params;
+	 adap->fe->ops.tuner_ops.set_params = dib7770_set_param_override;
+	 return 0;
+}
+
 static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
 {
 	struct dib0700_adapter_state *st = adap->priv;
@@ -1217,6 +1269,306 @@ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
 	return adap->fe == NULL ? -ENODEV : 0;
 }
 
+/* DIB807x generic */
+static struct dibx000_agc_config dib807x_agc_config[2] = {
+	{
+		BAND_VHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		 * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
+		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		 * P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
+			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+			(0 << 0), /* setup*/
+
+		600, /* inv_gain*/
+		10,  /* time_stabiliz*/
+
+		0,  /* alpha_level*/
+		118,  /* thlock*/
+
+		0,     /* wbd_inv*/
+		3530,  /* wbd_ref*/
+		1,     /* wbd_sel*/
+		5,     /* wbd_alpha*/
+
+		65535,  /* agc1_max*/
+		0,  /* agc1_min*/
+
+		65535,  /* agc2_max*/
+		0,      /* agc2_min*/
+
+		0,      /* agc1_pt1*/
+		40,     /* agc1_pt2*/
+		183,    /* agc1_pt3*/
+		206,    /* agc1_slope1*/
+		255,    /* agc1_slope2*/
+		72,     /* agc2_pt1*/
+		152,    /* agc2_pt2*/
+		88,     /* agc2_slope1*/
+		90,     /* agc2_slope2*/
+
+		17,  /* alpha_mant*/
+		27,  /* alpha_exp*/
+		23,  /* beta_mant*/
+		51,  /* beta_exp*/
+
+		0,  /* perform_agc_softsplit*/
+	}, {
+		BAND_UHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		 * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		 * P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
+			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+			(0 << 0), /* setup */
+
+		600, /* inv_gain*/
+		10,  /* time_stabiliz*/
+
+		0,  /* alpha_level*/
+		118,  /* thlock*/
+
+		0,     /* wbd_inv*/
+		3530,  /* wbd_ref*/
+		1,     /* wbd_sel*/
+		5,     /* wbd_alpha*/
+
+		65535,  /* agc1_max*/
+		0,  /* agc1_min*/
+
+		65535,  /* agc2_max*/
+		0,      /* agc2_min*/
+
+		0,      /* agc1_pt1*/
+		40,     /* agc1_pt2*/
+		183,    /* agc1_pt3*/
+		206,    /* agc1_slope1*/
+		255,    /* agc1_slope2*/
+		72,     /* agc2_pt1*/
+		152,    /* agc2_pt2*/
+		88,     /* agc2_slope1*/
+		90,     /* agc2_slope2*/
+
+		17,  /* alpha_mant*/
+		27,  /* alpha_exp*/
+		23,  /* beta_mant*/
+		51,  /* beta_exp*/
+
+		0,  /* perform_agc_softsplit*/
+	}
+};
+
+static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
+	60000, 15000, /* internal, sampling*/
+	1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/
+	0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core,
+			  ADClkSrc, modulo */
+	(3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
+	(0 << 25) | 0, /* ifreq = 0.000000 MHz*/
+	18179755, /* timf*/
+	12000000, /* xtal_hz*/
+};
+
+static struct dib8000_config dib807x_dib8000_config[2] = {
+	{
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 2,
+		.agc = dib807x_agc_config,
+		.pll = &dib807x_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+
+		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+		.div_cfg = 1,
+		.agc_control = &dib0070_ctrl_agc_filter,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.drives = 0x2d98,
+	}, {
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 2,
+		.agc = dib807x_agc_config,
+		.pll = &dib807x_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+
+		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+		.agc_control = &dib0070_ctrl_agc_filter,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.drives = 0x2d98,
+	}
+};
+
+static int dib807x_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+	return dib8000_set_gpio(fe, 5, 0, !onoff);
+}
+
+static int dib807x_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+	return dib8000_set_gpio(fe, 0, 0, onoff);
+}
+
+static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
+    { 240,      7},
+    { 0xffff,   6},
+};
+
+static struct dib0070_config dib807x_dib0070_config[2] = {
+	{
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib807x_tuner_reset,
+		.sleep = dib807x_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 4,
+		.vga_filter = 1,
+		.force_crystal_mode = 1,
+		.enable_third_order_filter = 1,
+		.charge_pump = 0,
+		.wbd_gain = dib8070_wbd_gain_cfg,
+		.osc_buffer_state = 0,
+		.freq_offset_khz_uhf = -100,
+		.freq_offset_khz_vhf = -100,
+	}, {
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib807x_tuner_reset,
+		.sleep = dib807x_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 2,
+		.vga_filter = 1,
+		.force_crystal_mode = 1,
+		.enable_third_order_filter = 1,
+		.charge_pump = 0,
+		.wbd_gain = dib8070_wbd_gain_cfg,
+		.osc_buffer_state = 0,
+		.freq_offset_khz_uhf = -25,
+		.freq_offset_khz_vhf = -25,
+	}
+};
+
+static int dib807x_set_param_override(struct dvb_frontend *fe,
+		struct dvb_frontend_parameters *fep)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	u16 offset = dib0070_wbd_offset(fe);
+	u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
+	switch (band) {
+	case BAND_VHF:
+		offset += 750;
+		break;
+	case BAND_UHF:  /* fall-thru wanted */
+	default:
+		offset += 250; break;
+	}
+	deb_info("WBD for DiB8000: %d\n", offset);
+	dib8000_set_wbd_ref(fe, offset);
+
+	return state->set_param_save(fe, fep);
+}
+
+static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe,
+			DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	if (adap->id == 0) {
+		if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+				&dib807x_dib0070_config[0]) == NULL)
+			return -ENODEV;
+	} else {
+		if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+				&dib807x_dib0070_config[1]) == NULL)
+			return -ENODEV;
+	}
+
+	st->set_param_save = adap->fe->ops.tuner_ops.set_params;
+	adap->fe->ops.tuner_ops.set_params = dib807x_set_param_override;
+	return 0;
+}
+
+
+/* STK807x */
+static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				0x80);
+
+	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
+			      &dib807x_dib8000_config[0]);
+
+	return adap->fe == NULL ?  -ENODEV : 0;
+}
+
+/* STK807xPVR */
+static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(500);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	/* initialize IC 0 */
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x80);
+
+	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
+			      &dib807x_dib8000_config[0]);
+
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
+static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
+{
+	/* initialize IC 1 */
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x82);
+
+	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82,
+			      &dib807x_dib8000_config[1]);
+
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
+
 /* STK7070PD */
 static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
 	{
@@ -1500,7 +1852,15 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T3) },
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T5) },
 	{ USB_DEVICE(USB_VID_YUAN,      USB_PID_YUAN_STK7700D) },
-	{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_STK7700D_2) },
+/* 55 */{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_STK7700D_2) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73A) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73ESE) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV282E) },
+	{ USB_DEVICE(USB_VID_DIBCOM,	USB_PID_DIBCOM_STK7770P) },
+/* 60 */{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS_2) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XPVR) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XP) },
+	{ USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1704,7 +2064,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.num_device_descs = 12,
+		.num_device_descs = 11,
 		.devices = {
 			{   "DiBcom STK7070P reference design",
 				{ &dib0700_usb_id_table[15], NULL },
@@ -1738,11 +2098,6 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ &dib0700_usb_id_table[30], NULL },
 				{ NULL },
 			},
-			{   "Terratec Cinergy T USB XXS/ T3",
-				{ &dib0700_usb_id_table[33],
-					&dib0700_usb_id_table[52], NULL },
-				{ NULL },
-			},
 			{   "Elgato EyeTV DTT",
 				{ &dib0700_usb_id_table[49], NULL },
 				{ NULL },
@@ -1764,6 +2119,41 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = stk7070p_frontend_attach,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 3,
+		.devices = {
+			{   "Pinnacle PCTV 73A",
+				{ &dib0700_usb_id_table[56], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 73e SE",
+				{ &dib0700_usb_id_table[57], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 282e",
+				{ &dib0700_usb_id_table[58], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
+
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
 		.num_adapters = 2,
 		.adapter = {
 			{
@@ -1927,6 +2317,104 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ NULL },
 			},
 		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = stk7070p_frontend_attach,
+				.tuner_attach     = dib7770p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "DiBcom STK7770P reference design",
+				{ &dib0700_usb_id_table[59], NULL },
+				{ NULL },
+			},
+			{   "Terratec Cinergy T USB XXS (HD)/ T3",
+				{ &dib0700_usb_id_table[33],
+					&dib0700_usb_id_table[52],
+					&dib0700_usb_id_table[60], NULL},
+				{ NULL },
+			},
+		},
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = stk807x_frontend_attach,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "DiBcom STK807xP reference design",
+				{ &dib0700_usb_id_table[62], NULL },
+				{ NULL },
+			},
+			{   "Prolink Pixelview SBTVD",
+				{ &dib0700_usb_id_table[63], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
+
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 2,
+		.adapter = {
+			{
+				.frontend_attach  = stk807xpvr_frontend_attach0,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+			{
+				.frontend_attach  = stk807xpvr_frontend_attach1,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK807xPVR reference design",
+				{ &dib0700_usb_id_table[61], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
 	},
 };
 
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 185a5069b10b..a548c14c1944 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -46,6 +46,7 @@
 #define USB_VID_MSI_2				0x1462
 #define USB_VID_OPERA1				0x695c
 #define USB_VID_PINNACLE			0x2304
+#define USB_VID_PIXELVIEW			0x1554
 #define USB_VID_TECHNOTREND			0x0b48
 #define USB_VID_TERRATEC			0x0ccd
 #define USB_VID_TELESTAR			0x10b9
@@ -59,6 +60,7 @@
 #define USB_VID_YUAN				0x1164
 #define USB_VID_XTENSIONS			0x1ae7
 #define USB_VID_HUMAX_COEX			0x10b9
+#define USB_VID_774				0x7a69
 
 /* Product IDs */
 #define USB_PID_ADSTECH_USB2_COLD			0xa333
@@ -95,7 +97,10 @@
 #define USB_PID_DIBCOM_STK7700_U7000			0x7001
 #define USB_PID_DIBCOM_STK7070P				0x1ebc
 #define USB_PID_DIBCOM_STK7070PD			0x1ebe
+#define USB_PID_DIBCOM_STK807XP				0x1f90
+#define USB_PID_DIBCOM_STK807XPVR			0x1f98
 #define USB_PID_DIBCOM_ANCHOR_2135_COLD			0x2131
+#define USB_PID_DIBCOM_STK7770P				0x1e80
 #define USB_PID_DPOSH_M9206_COLD			0x9206
 #define USB_PID_DPOSH_M9206_WARM			0xa090
 #define USB_PID_UNIWILL_STK7700P			0x6003
@@ -184,6 +189,7 @@
 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS		0x0060
 #define USB_PID_TERRATEC_CINERGY_T_EXPRESS		0x0062
 #define USB_PID_TERRATEC_CINERGY_T_XXS			0x0078
+#define USB_PID_TERRATEC_CINERGY_T_XXS_2		0x00ab
 #define USB_PID_TERRATEC_T3				0x10a0
 #define USB_PID_TERRATEC_T5				0x10a1
 #define USB_PID_PINNACLE_EXPRESSCARD_320CX		0x022e
@@ -195,6 +201,10 @@
 #define USB_PID_PINNACLE_PCTV73E			0x0237
 #define USB_PID_PINNACLE_PCTV801E			0x023a
 #define USB_PID_PINNACLE_PCTV801E_SE			0x023b
+#define USB_PID_PINNACLE_PCTV73A			0x0243
+#define USB_PID_PINNACLE_PCTV73ESE			0x0245
+#define USB_PID_PINNACLE_PCTV282E			0x0248
+#define USB_PID_PIXELVIEW_SBTVD				0x5010
 #define USB_PID_PCTV_200E				0x020e
 #define USB_PID_PCTV_400E				0x020f
 #define USB_PID_PCTV_450E				0x0222
@@ -265,5 +275,6 @@
 #define USB_PID_ELGATO_EYETV_DTT_Dlx			0x0020
 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD		0x5000
 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM		0x5001
+#define USB_PID_FRIIO_WHITE				0x0001
 
 #endif
diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
new file mode 100644
index 000000000000..c4dfe25cf60d
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/friio-fe.c
@@ -0,0 +1,483 @@
+/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
+ *
+ * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
+ *
+ * This module is based off the the gl861 and vp702x modules.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include "friio.h"
+
+struct jdvbt90502_state {
+	struct i2c_adapter *i2c;
+	struct dvb_frontend frontend;
+	struct jdvbt90502_config config;
+};
+
+/* NOTE: TC90502 has 16bit register-address? */
+/* register 0x0100 is used for reading PLL status, so reg is u16 here */
+static int jdvbt90502_reg_read(struct jdvbt90502_state *state,
+			       const u16 reg, u8 *buf, const size_t count)
+{
+	int ret;
+	u8 wbuf[3];
+	struct i2c_msg msg[2];
+
+	wbuf[0] = reg & 0xFF;
+	wbuf[1] = 0;
+	wbuf[2] = reg >> 8;
+
+	msg[0].addr = state->config.demod_address;
+	msg[0].flags = 0;
+	msg[0].buf = wbuf;
+	msg[0].len = sizeof(wbuf);
+
+	msg[1].addr = msg[0].addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].buf = buf;
+	msg[1].len = count;
+
+	ret = i2c_transfer(state->i2c, msg, 2);
+	if (ret != 2) {
+		deb_fe(" reg read failed.\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+/* currently 16bit register-address is not used, so reg is u8 here */
+static int jdvbt90502_single_reg_write(struct jdvbt90502_state *state,
+				       const u8 reg, const u8 val)
+{
+	struct i2c_msg msg;
+	u8 wbuf[2];
+
+	wbuf[0] = reg;
+	wbuf[1] = val;
+
+	msg.addr = state->config.demod_address;
+	msg.flags = 0;
+	msg.buf = wbuf;
+	msg.len = sizeof(wbuf);
+
+	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+		deb_fe(" reg write failed.");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int _jdvbt90502_write(struct dvb_frontend *fe, u8 *buf, int len)
+{
+	struct jdvbt90502_state *state = fe->demodulator_priv;
+	int err, i;
+	for (i = 0; i < len - 1; i++) {
+		err = jdvbt90502_single_reg_write(state,
+						  buf[0] + i, buf[i + 1]);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+/* read pll status byte via the demodulator's I2C register */
+/* note: Win box reads it by 8B block at the I2C addr 0x30 from reg:0x80 */
+static int jdvbt90502_pll_read(struct jdvbt90502_state *state, u8 *result)
+{
+	int ret;
+
+	/* +1 for reading */
+	u8 pll_addr_byte = (state->config.pll_address << 1) + 1;
+
+	*result = 0;
+
+	ret = jdvbt90502_single_reg_write(state, JDVBT90502_2ND_I2C_REG,
+					  pll_addr_byte);
+	if (ret)
+		goto error;
+
+	ret = jdvbt90502_reg_read(state, 0x0100, result, 1);
+	if (ret)
+		goto error;
+
+	deb_fe("PLL read val:%02x\n", *result);
+	return 0;
+
+error:
+	deb_fe("%s:ret == %d\n", __func__, ret);
+	return -EREMOTEIO;
+}
+
+
+/* set pll frequency via the demodulator's I2C register */
+static int jdvbt90502_pll_set_freq(struct jdvbt90502_state *state, u32 freq)
+{
+	int ret;
+	int retry;
+	u8 res1;
+	u8 res2[9];
+
+	u8 pll_freq_cmd[PLL_CMD_LEN];
+	u8 pll_agc_cmd[PLL_CMD_LEN];
+	struct i2c_msg msg[2];
+	u32 f;
+
+	deb_fe("%s: freq=%d, step=%d\n", __func__, freq,
+	       state->frontend.ops.info.frequency_stepsize);
+	/* freq -> oscilator frequency conversion. */
+	/* freq: 473,000,000 + n*6,000,000 (no 1/7MHz shift to center freq) */
+	/* add 400[1/7 MHZ] = 57.142857MHz.   57MHz for the IF,  */
+	/*                                   1/7MHz for center freq shift */
+	f = freq / state->frontend.ops.info.frequency_stepsize;
+	f += 400;
+	pll_freq_cmd[DEMOD_REDIRECT_REG] = JDVBT90502_2ND_I2C_REG; /* 0xFE */
+	pll_freq_cmd[ADDRESS_BYTE] = state->config.pll_address << 1;
+	pll_freq_cmd[DIVIDER_BYTE1] = (f >> 8) & 0x7F;
+	pll_freq_cmd[DIVIDER_BYTE2] = f & 0xFF;
+	pll_freq_cmd[CONTROL_BYTE] = 0xB2; /* ref.divider:28, 4MHz/28=1/7MHz */
+	pll_freq_cmd[BANDSWITCH_BYTE] = 0x08;	/* UHF band */
+
+	msg[0].addr = state->config.demod_address;
+	msg[0].flags = 0;
+	msg[0].buf = pll_freq_cmd;
+	msg[0].len = sizeof(pll_freq_cmd);
+
+	ret = i2c_transfer(state->i2c, &msg[0], 1);
+	if (ret != 1)
+		goto error;
+
+	udelay(50);
+
+	pll_agc_cmd[DEMOD_REDIRECT_REG] = pll_freq_cmd[DEMOD_REDIRECT_REG];
+	pll_agc_cmd[ADDRESS_BYTE] = pll_freq_cmd[ADDRESS_BYTE];
+	pll_agc_cmd[DIVIDER_BYTE1] = pll_freq_cmd[DIVIDER_BYTE1];
+	pll_agc_cmd[DIVIDER_BYTE2] = pll_freq_cmd[DIVIDER_BYTE2];
+	pll_agc_cmd[CONTROL_BYTE] = 0x9A; /*  AGC_CTRL instead of BANDSWITCH */
+	pll_agc_cmd[AGC_CTRL_BYTE] = 0x50;
+	/* AGC Time Constant 2s, AGC take-over point:103dBuV(lowest) */
+
+	msg[1].addr = msg[0].addr;
+	msg[1].flags = 0;
+	msg[1].buf = pll_agc_cmd;
+	msg[1].len = sizeof(pll_agc_cmd);
+
+	ret = i2c_transfer(state->i2c, &msg[1], 1);
+	if (ret != 1)
+		goto error;
+
+	/* I don't know what these cmds are for,  */
+	/* but the USB log on a windows box contains them */
+	ret = jdvbt90502_single_reg_write(state, 0x01, 0x40);
+	ret |= jdvbt90502_single_reg_write(state, 0x01, 0x00);
+	if (ret)
+		goto error;
+	udelay(100);
+
+	/* wait for the demod to be ready? */
+#define RETRY_COUNT 5
+	for (retry = 0; retry < RETRY_COUNT; retry++) {
+		ret = jdvbt90502_reg_read(state, 0x0096, &res1, 1);
+		if (ret)
+			goto error;
+		/* if (res1 != 0x00) goto error; */
+		ret = jdvbt90502_reg_read(state, 0x00B0, res2, sizeof(res2));
+		if (ret)
+			goto error;
+		if (res2[0] >= 0xA7)
+			break;
+		msleep(100);
+	}
+	if (retry >= RETRY_COUNT) {
+		deb_fe("%s: FE does not get ready after freq setting.\n",
+		       __func__);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+error:
+	deb_fe("%s:ret == %d\n", __func__, ret);
+	return -EREMOTEIO;
+}
+
+static int jdvbt90502_read_status(struct dvb_frontend *fe, fe_status_t *state)
+{
+	u8 result;
+	int ret;
+
+	*state = FE_HAS_SIGNAL;
+
+	ret = jdvbt90502_pll_read(fe->demodulator_priv, &result);
+	if (ret) {
+		deb_fe("%s:ret == %d\n", __func__, ret);
+		return -EREMOTEIO;
+	}
+
+	*state = FE_HAS_SIGNAL
+		| FE_HAS_CARRIER
+		| FE_HAS_VITERBI
+		| FE_HAS_SYNC;
+
+	if (result & PLL_STATUS_LOCKED)
+		*state |= FE_HAS_LOCK;
+
+	return 0;
+}
+
+static int jdvbt90502_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	*ber = 0;
+	return 0;
+}
+
+static int jdvbt90502_read_signal_strength(struct dvb_frontend *fe,
+					   u16 *strength)
+{
+	int ret;
+	u8 rbuf[37];
+
+	*strength = 0;
+
+	/* status register (incl. signal strength) : 0x89  */
+	/* TODO: read just the necessary registers [0x8B..0x8D]? */
+	ret = jdvbt90502_reg_read(fe->demodulator_priv, 0x0089,
+				  rbuf, sizeof(rbuf));
+
+	if (ret) {
+		deb_fe("%s:ret == %d\n", __func__, ret);
+		return -EREMOTEIO;
+	}
+
+	/* signal_strength: rbuf[2-4] (24bit BE), use lower 16bit for now. */
+	*strength = (rbuf[3] << 8) + rbuf[4];
+	if (rbuf[2])
+		*strength = 0xffff;
+
+	return 0;
+}
+
+static int jdvbt90502_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	*snr = 0x0101;
+	return 0;
+}
+
+static int jdvbt90502_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	*ucblocks = 0;
+	return 0;
+}
+
+static int jdvbt90502_get_tune_settings(struct dvb_frontend *fe,
+					struct dvb_frontend_tune_settings *fs)
+{
+	fs->min_delay_ms = 500;
+	fs->step_size = 0;
+	fs->max_drift = 0;
+
+	return 0;
+}
+
+static int jdvbt90502_get_frontend(struct dvb_frontend *fe,
+				   struct dvb_frontend_parameters *p)
+{
+	p->inversion = INVERSION_AUTO;
+	p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
+	p->u.ofdm.code_rate_HP = FEC_AUTO;
+	p->u.ofdm.code_rate_LP = FEC_AUTO;
+	p->u.ofdm.constellation = QAM_64;
+	p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO;
+	p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO;
+	p->u.ofdm.hierarchy_information = HIERARCHY_AUTO;
+	return 0;
+}
+
+static int jdvbt90502_set_frontend(struct dvb_frontend *fe,
+				   struct dvb_frontend_parameters *p)
+{
+	/**
+	 * NOTE: ignore all the paramters except frequency.
+	 *       others should be fixed to the proper value for ISDB-T,
+	 *       but don't check here.
+	 */
+
+	struct jdvbt90502_state *state = fe->demodulator_priv;
+	int ret;
+
+	deb_fe("%s: Freq:%d\n", __func__, p->frequency);
+
+	ret = jdvbt90502_pll_set_freq(state, p->frequency);
+	if (ret) {
+		deb_fe("%s:ret == %d\n", __func__, ret);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int jdvbt90502_sleep(struct dvb_frontend *fe)
+{
+	deb_fe("%s called.\n", __func__);
+	return 0;
+}
+
+
+/**
+ * (reg, val) commad list to initialize this module.
+ *  captured on a Windows box.
+ */
+static u8 init_code[][2] = {
+	{0x01, 0x40},
+	{0x04, 0x38},
+	{0x05, 0x40},
+	{0x07, 0x40},
+	{0x0F, 0x4F},
+	{0x11, 0x21},
+	{0x12, 0x0B},
+	{0x13, 0x2F},
+	{0x14, 0x31},
+	{0x16, 0x02},
+	{0x21, 0xC4},
+	{0x22, 0x20},
+	{0x2C, 0x79},
+	{0x2D, 0x34},
+	{0x2F, 0x00},
+	{0x30, 0x28},
+	{0x31, 0x31},
+	{0x32, 0xDF},
+	{0x38, 0x01},
+	{0x39, 0x78},
+	{0x3B, 0x33},
+	{0x3C, 0x33},
+	{0x48, 0x90},
+	{0x51, 0x68},
+	{0x5E, 0x38},
+	{0x71, 0x00},
+	{0x72, 0x08},
+	{0x77, 0x00},
+	{0xC0, 0x21},
+	{0xC1, 0x10},
+	{0xE4, 0x1A},
+	{0xEA, 0x1F},
+	{0x77, 0x00},
+	{0x71, 0x00},
+	{0x71, 0x00},
+	{0x76, 0x0C},
+};
+
+const static int init_code_len = sizeof(init_code) / sizeof(u8[2]);
+
+static int jdvbt90502_init(struct dvb_frontend *fe)
+{
+	int i = -1;
+	int ret;
+	struct i2c_msg msg;
+
+	struct jdvbt90502_state *state = fe->demodulator_priv;
+
+	deb_fe("%s called.\n", __func__);
+
+	msg.addr = state->config.demod_address;
+	msg.flags = 0;
+	msg.len = 2;
+	for (i = 0; i < init_code_len; i++) {
+		msg.buf = init_code[i];
+		ret = i2c_transfer(state->i2c, &msg, 1);
+		if (ret != 1)
+			goto error;
+	}
+	msleep(100);
+
+	return 0;
+
+error:
+	deb_fe("%s: init_code[%d] failed. ret==%d\n", __func__, i, ret);
+	return -EREMOTEIO;
+}
+
+
+static void jdvbt90502_release(struct dvb_frontend *fe)
+{
+	struct jdvbt90502_state *state = fe->demodulator_priv;
+	kfree(state);
+}
+
+
+static struct dvb_frontend_ops jdvbt90502_ops;
+
+struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d)
+{
+	struct jdvbt90502_state *state = NULL;
+
+	deb_info("%s called.\n", __func__);
+
+	/* allocate memory for the internal state */
+	state = kzalloc(sizeof(struct jdvbt90502_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+
+	/* setup the state */
+	state->i2c = &d->i2c_adap;
+	memcpy(&state->config, &friio_fe_config, sizeof(friio_fe_config));
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &jdvbt90502_ops,
+	       sizeof(jdvbt90502_ops));
+	state->frontend.demodulator_priv = state;
+
+	if (jdvbt90502_init(&state->frontend) < 0)
+		goto error;
+
+	return &state->frontend;
+
+error:
+	kfree(state);
+	return NULL;
+}
+
+static struct dvb_frontend_ops jdvbt90502_ops = {
+
+	.info = {
+		.name			= "Comtech JDVBT90502 ISDB-T",
+		.type			= FE_OFDM,
+		.frequency_min		= 473000000, /* UHF 13ch, center */
+		.frequency_max		= 767142857, /* UHF 62ch, center */
+		.frequency_stepsize	= JDVBT90502_PLL_CLK /
+							JDVBT90502_PLL_DIVIDER,
+		.frequency_tolerance	= 0,
+
+		/* NOTE: this driver ignores all parameters but frequency. */
+		.caps = FE_CAN_INVERSION_AUTO |
+			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+			FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
+			FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+			FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO |
+			FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.release = jdvbt90502_release,
+
+	.init = jdvbt90502_init,
+	.sleep = jdvbt90502_sleep,
+	.write = _jdvbt90502_write,
+
+	.set_frontend = jdvbt90502_set_frontend,
+	.get_frontend = jdvbt90502_get_frontend,
+	.get_tune_settings = jdvbt90502_get_tune_settings,
+
+	.read_status = jdvbt90502_read_status,
+	.read_ber = jdvbt90502_read_ber,
+	.read_signal_strength = jdvbt90502_read_signal_strength,
+	.read_snr = jdvbt90502_read_snr,
+	.read_ucblocks = jdvbt90502_read_ucblocks,
+};
diff --git a/drivers/media/dvb/dvb-usb/friio.c b/drivers/media/dvb/dvb-usb/friio.c
new file mode 100644
index 000000000000..14a65b4aec07
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/friio.c
@@ -0,0 +1,525 @@
+/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
+ *
+ * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
+ *
+ * This module is based off the the gl861 and vp702x modules.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include "friio.h"
+
+/* debug */
+int dvb_usb_friio_debug;
+module_param_named(debug, dvb_usb_friio_debug, int, 0644);
+MODULE_PARM_DESC(debug,
+		 "set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))."
+		 DVB_USB_DEBUG_STATUS);
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/**
+ * Indirect I2C access to the PLL via FE.
+ * whole I2C protocol data to the PLL is sent via the FE's I2C register.
+ * This is done by a control msg to the FE with the I2C data accompanied, and
+ * a specific USB request number is assigned for that purpose.
+ *
+ * this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE).
+ * TODO: refoctored, smarter i2c functions.
+ */
+static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr,
+				  u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+	u16 index = wbuf[0];	/* must be JDVBT90502_2ND_I2C_REG(=0xFE) */
+	u16 value = addr << (8 + 1);
+	int wo = (rbuf == NULL || rlen == 0);	/* write only */
+	u8 req, type;
+
+	deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n",
+		 wbuf[1], wbuf[0], wlen - 1);
+
+	if (wo && wlen >= 2) {
+		req = GL861_REQ_I2C_DATA_CTRL_WRITE;
+		type = GL861_WRITE;
+		udelay(20);
+		return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+				       req, type, value, index,
+				       &wbuf[1], wlen - 1, 2000);
+	}
+
+	deb_xfer("not supported ctrl-msg, aborting.");
+	return -EINVAL;
+}
+
+/* normal I2C access (without extra data arguments).
+ * write to the register wbuf[0] at I2C address addr with the value wbuf[1],
+ *  or read from the register wbuf[0].
+ * register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3
+ */
+static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
+			 u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+	u16 index;
+	u16 value = addr << (8 + 1);
+	int wo = (rbuf == NULL || rlen == 0);	/* write-only */
+	u8 req, type;
+	unsigned int pipe;
+
+	/* special case for the indirect I2C access to the PLL via FE, */
+	if (addr == friio_fe_config.demod_address &&
+	    wbuf[0] == JDVBT90502_2ND_I2C_REG)
+		return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen);
+
+	if (wo) {
+		req = GL861_REQ_I2C_WRITE;
+		type = GL861_WRITE;
+		pipe = usb_sndctrlpipe(d->udev, 0);
+	} else {		/* rw */
+		req = GL861_REQ_I2C_READ;
+		type = GL861_READ;
+		pipe = usb_rcvctrlpipe(d->udev, 0);
+	}
+
+	switch (wlen) {
+	case 1:
+		index = wbuf[0];
+		break;
+	case 2:
+		index = wbuf[0];
+		value = value + wbuf[1];
+		break;
+	case 3:
+		/* special case for 16bit register-address */
+		index = (wbuf[2] << 8) | wbuf[0];
+		value = value + wbuf[1];
+		break;
+	default:
+		deb_xfer("wlen = %x, aborting.", wlen);
+		return -EINVAL;
+	}
+	msleep(1);
+	return usb_control_msg(d->udev, pipe, req, type,
+			       value, index, rbuf, rlen, 2000);
+}
+
+/* I2C */
+static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+			  int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int i;
+
+
+	if (num > 2)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	for (i = 0; i < num; i++) {
+		/* write/read request */
+		if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
+			if (gl861_i2c_msg(d, msg[i].addr,
+					  msg[i].buf, msg[i].len,
+					  msg[i + 1].buf, msg[i + 1].len) < 0)
+				break;
+			i++;
+		} else
+			if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
+					  msg[i].len, NULL, 0) < 0)
+				break;
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+	return i;
+}
+
+static u32 gl861_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+
+static int friio_ext_ctl(struct dvb_usb_adapter *adap,
+			 u32 sat_color, int lnb_on)
+{
+	int i;
+	int ret;
+	struct i2c_msg msg;
+	u8 buf[2];
+	u32 mask;
+	u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0;
+
+	msg.addr = 0x00;
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = buf;
+
+	buf[0] = 0x00;
+
+	/* send 2bit header (&B10) */
+	buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE;
+	ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+	buf[1] |= FRIIO_CTL_CLK;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+
+	buf[1] = lnb | FRIIO_CTL_STROBE;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+	buf[1] |= FRIIO_CTL_CLK;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+
+	/* send 32bit(satur, R, G, B) data in serial */
+	mask = 1 << 31;
+	for (i = 0; i < 32; i++) {
+		buf[1] = lnb | FRIIO_CTL_STROBE;
+		if (sat_color & mask)
+			buf[1] |= FRIIO_CTL_LED;
+		ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+		buf[1] |= FRIIO_CTL_CLK;
+		ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+		mask >>= 1;
+	}
+
+	/* set the strobe off */
+	buf[1] = lnb;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+	buf[1] |= FRIIO_CTL_CLK;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+
+	return (ret == 70);
+}
+
+
+static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
+
+/* TODO: move these init cmds to the FE's init routine? */
+static u8 streaming_init_cmds[][2] = {
+	{0x33, 0x08},
+	{0x37, 0x40},
+	{0x3A, 0x1F},
+	{0x3B, 0xFF},
+	{0x3C, 0x1F},
+	{0x3D, 0xFF},
+	{0x38, 0x00},
+	{0x35, 0x00},
+	{0x39, 0x00},
+	{0x36, 0x00},
+};
+static int cmdlen = sizeof(streaming_init_cmds) / 2;
+
+/*
+ * Command sequence in this init function is a replay
+ *  of the captured USB commands from the Windows proprietary driver.
+ */
+static int friio_initialize(struct dvb_usb_device *d)
+{
+	int ret;
+	int i;
+	int retry = 0;
+	u8 rbuf[2];
+	u8 wbuf[3];
+
+	deb_info("%s called.\n", __func__);
+
+	/* use gl861_i2c_msg instead of gl861_i2c_xfer(), */
+	/* because the i2c device is not set up yet. */
+	wbuf[0] = 0x11;
+	wbuf[1] = 0x02;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+	msleep(2);
+
+	wbuf[0] = 0x11;
+	wbuf[1] = 0x00;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+	msleep(1);
+
+	/* following msgs should be in the FE's init code? */
+	/* cmd sequence to identify the device type? (friio black/white) */
+	wbuf[0] = 0x03;
+	wbuf[1] = 0x80;
+	/* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */
+	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+			      GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
+			      0x1200, 0x0100, wbuf, 2, 2000);
+	if (ret < 0)
+		goto error;
+
+	msleep(2);
+	wbuf[0] = 0x00;
+	wbuf[2] = 0x01;		/* reg.0x0100 */
+	wbuf[1] = 0x00;
+	ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2);
+	/* my Friio White returns 0xffff. */
+	if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
+		goto error;
+
+	msleep(2);
+	wbuf[0] = 0x03;
+	wbuf[1] = 0x80;
+	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+			      GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
+			      0x9000, 0x0100, wbuf, 2, 2000);
+	if (ret < 0)
+		goto error;
+
+	msleep(2);
+	wbuf[0] = 0x00;
+	wbuf[2] = 0x01;		/* reg.0x0100 */
+	wbuf[1] = 0x00;
+	ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2);
+	/* my Friio White returns 0xffff again. */
+	if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
+		goto error;
+
+	msleep(1);
+
+restart:
+	/* ============ start DEMOD init cmds ================== */
+	/* read PLL status to clear the POR bit */
+	wbuf[0] = JDVBT90502_2ND_I2C_REG;
+	wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1;	/* +1 for reading */
+	ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+
+	msleep(5);
+	/* note: DEMODULATOR has 16bit register-address. */
+	wbuf[0] = 0x00;
+	wbuf[2] = 0x01;		/* reg addr: 0x0100 */
+	wbuf[1] = 0x00;		/* val: not used */
+	ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1);
+	if (ret < 0)
+		goto error;
+/*
+	msleep(1);
+	wbuf[0] = 0x80;
+	wbuf[1] = 0x00;
+	ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1);
+	if (ret < 0)
+		goto error;
+ */
+	if (rbuf[0] & 0x80) {	/* still in PowerOnReset state? */
+		if (++retry > 3) {
+			deb_info("failed to get the correct"
+				 " FE demod status:0x%02x\n", rbuf[0]);
+			goto error;
+		}
+		msleep(100);
+		goto restart;
+	}
+
+	/* TODO: check return value in rbuf */
+	/* =========== end DEMOD init cmds ===================== */
+	msleep(1);
+
+	wbuf[0] = 0x30;
+	wbuf[1] = 0x04;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+
+	msleep(2);
+	/* following 2 cmds unnecessary? */
+	wbuf[0] = 0x00;
+	wbuf[1] = 0x01;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+
+	wbuf[0] = 0x06;
+	wbuf[1] = 0x0F;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+
+	/* some streaming ctl cmds (maybe) */
+	msleep(10);
+	for (i = 0; i < cmdlen; i++) {
+		ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2,
+				    NULL, 0);
+		if (ret < 0)
+			goto error;
+		msleep(1);
+	}
+	msleep(20);
+
+	/* change the LED color etc. */
+	ret = friio_streaming_ctrl(&d->adapter[0], 0);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	deb_info("%s:ret == %d\n", __func__, ret);
+	return -EIO;
+}
+
+/* Callbacks for DVB USB */
+
+static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	int ret;
+
+	deb_info("%s called.(%d)\n", __func__, onoff);
+
+	/* set the LED color and saturation (and LNB on) */
+	if (onoff)
+		ret = friio_ext_ctl(adap, 0x6400ff64, 1);
+	else
+		ret = friio_ext_ctl(adap, 0x96ff00ff, 1);
+
+	if (ret != 1) {
+		deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret);
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int friio_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	if (friio_initialize(adap->dev) < 0)
+		return -EIO;
+
+	adap->fe = jdvbt90502_attach(adap->dev);
+	if (adap->fe == NULL)
+		return -EIO;
+
+	return 0;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties friio_properties;
+
+static int friio_probe(struct usb_interface *intf,
+		       const struct usb_device_id *id)
+{
+	struct dvb_usb_device *d;
+	struct usb_host_interface *alt;
+	int ret;
+
+	if (intf->num_altsetting < GL861_ALTSETTING_COUNT)
+		return -ENODEV;
+
+	alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING);
+	if (alt == NULL) {
+		deb_rc("not alt found!\n");
+		return -ENODEV;
+	}
+	ret = usb_set_interface(interface_to_usbdev(intf),
+				alt->desc.bInterfaceNumber,
+				alt->desc.bAlternateSetting);
+	if (ret != 0) {
+		deb_rc("failed to set alt-setting!\n");
+		return ret;
+	}
+
+	ret = dvb_usb_device_init(intf, &friio_properties,
+				  THIS_MODULE, &d, adapter_nr);
+	if (ret == 0)
+		friio_streaming_ctrl(&d->adapter[0], 1);
+
+	return ret;
+}
+
+
+struct jdvbt90502_config friio_fe_config = {
+	.demod_address = FRIIO_DEMOD_ADDR,
+	.pll_address = FRIIO_PLL_ADDR,
+};
+
+static struct i2c_algorithm gl861_i2c_algo = {
+	.master_xfer   = gl861_i2c_xfer,
+	.functionality = gl861_i2c_func,
+};
+
+static struct usb_device_id friio_table[] = {
+	{ USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) },
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, friio_table);
+
+
+static struct dvb_usb_device_properties friio_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+	.usb_ctrl = DEVICE_SPECIFIC,
+
+	.size_of_priv = 0,
+
+	.num_adapters = 1,
+	.adapter = {
+		/* caps:0 =>  no pid filter, 188B TS packet */
+		/* GL861 has a HW pid filter, but no info available. */
+		{
+			.caps  = 0,
+
+			.frontend_attach  = friio_frontend_attach,
+			.streaming_ctrl = friio_streaming_ctrl,
+
+			.stream = {
+				.type = USB_BULK,
+				/* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */
+				.count = 8,
+				.endpoint = 0x01,
+				.u = {
+					/* GL861 has 6KB buf inside */
+					.bulk = {
+						.buffersize = 16384,
+					}
+				}
+			},
+		}
+	},
+	.i2c_algo = &gl861_i2c_algo,
+
+	.num_device_descs = 1,
+	.devices = {
+		{
+			.name = "774 Friio ISDB-T USB2.0",
+			.cold_ids = { NULL },
+			.warm_ids = { &friio_table[0], NULL },
+		},
+	}
+};
+
+static struct usb_driver friio_driver = {
+	.name		= "dvb_usb_friio",
+	.probe		= friio_probe,
+	.disconnect	= dvb_usb_device_exit,
+	.id_table	= friio_table,
+};
+
+
+/* module stuff */
+static int __init friio_module_init(void)
+{
+	int ret;
+
+	ret = usb_register(&friio_driver);
+	if (ret)
+		err("usb_register failed. Error number %d", ret);
+
+	return ret;
+}
+
+
+static void __exit friio_module_exit(void)
+{
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&friio_driver);
+}
+
+module_init(friio_module_init);
+module_exit(friio_module_exit);
+
+MODULE_AUTHOR("Akihiro Tsukada <tskd2@yahoo.co.jp>");
+MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver");
+MODULE_VERSION("0.2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/friio.h b/drivers/media/dvb/dvb-usb/friio.h
new file mode 100644
index 000000000000..af8d55e390fb
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/friio.h
@@ -0,0 +1,99 @@
+/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
+ *
+ * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
+ *
+ * This module is based off the the gl861 and vp702x modules.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#ifndef _DVB_USB_FRIIO_H_
+#define _DVB_USB_FRIIO_H_
+
+/**
+ *      Friio Components
+ *       USB hub:                                AU4254
+ *         USB controller(+ TS dmx & streaming): GL861
+ *         Frontend:                             comtech JDVBT-90502
+ *             (tuner PLL:                       tua6034, I2C addr:(0xC0 >> 1))
+ *             (OFDM demodulator:                TC90502, I2C addr:(0x30 >> 1))
+ *         LED x3 (+LNB) controll:               PIC 16F676
+ *         EEPROM:                               24C08
+ *
+ *        (USB smart card reader:                AU9522)
+ *
+ */
+
+#define DVB_USB_LOG_PREFIX "friio"
+#include "dvb-usb.h"
+
+extern int dvb_usb_friio_debug;
+#define deb_info(args...) dprintk(dvb_usb_friio_debug, 0x01, args)
+#define deb_xfer(args...) dprintk(dvb_usb_friio_debug, 0x02, args)
+#define deb_rc(args...)   dprintk(dvb_usb_friio_debug, 0x04, args)
+#define deb_fe(args...)   dprintk(dvb_usb_friio_debug, 0x08, args)
+
+/* Vendor requests */
+#define GL861_WRITE		0x40
+#define GL861_READ		0xc0
+
+/* command bytes */
+#define GL861_REQ_I2C_WRITE	0x01
+#define GL861_REQ_I2C_READ	0x02
+/* For control msg with data argument */
+/* Used for accessing the PLL on the secondary I2C bus of FE via GL861 */
+#define GL861_REQ_I2C_DATA_CTRL_WRITE	0x03
+
+#define GL861_ALTSETTING_COUNT	2
+#define FRIIO_BULK_ALTSETTING	0
+#define FRIIO_ISOC_ALTSETTING	1
+
+/* LED & LNB control via PIC. */
+/* basically, it's serial control with clock and strobe. */
+/* write the below 4bit control data to the reg 0x00 at the I2C addr 0x00 */
+/* when controlling the LEDs, 32bit(saturation, R, G, B) is sent on the bit3*/
+#define FRIIO_CTL_LNB (1 << 0)
+#define FRIIO_CTL_STROBE (1 << 1)
+#define FRIIO_CTL_CLK (1 << 2)
+#define FRIIO_CTL_LED (1 << 3)
+
+/* Front End related */
+
+#define FRIIO_DEMOD_ADDR  (0x30 >> 1)
+#define FRIIO_PLL_ADDR  (0xC0 >> 1)
+
+#define JDVBT90502_PLL_CLK	4000000
+#define JDVBT90502_PLL_DIVIDER	28
+
+#define JDVBT90502_2ND_I2C_REG 0xFE
+
+/* byte index for pll i2c command data structure*/
+/* see datasheet for tua6034 */
+#define DEMOD_REDIRECT_REG 0
+#define ADDRESS_BYTE       1
+#define DIVIDER_BYTE1      2
+#define DIVIDER_BYTE2      3
+#define CONTROL_BYTE       4
+#define BANDSWITCH_BYTE    5
+#define AGC_CTRL_BYTE      5
+#define PLL_CMD_LEN        6
+
+/* bit masks for PLL STATUS response */
+#define PLL_STATUS_POR_MODE   0x80 /* 1: Power on Reset (test) Mode */
+#define PLL_STATUS_LOCKED     0x40 /* 1: locked */
+#define PLL_STATUS_AGC_ACTIVE 0x08 /* 1:active */
+#define PLL_STATUS_TESTMODE   0x07 /* digital output level (5 level) */
+  /* 0.15Vcc step   0x00: < 0.15Vcc, ..., 0x04: >= 0.6Vcc (<= 1Vcc) */
+
+
+struct jdvbt90502_config {
+	u8 demod_address; /* i2c addr for demodulator IC */
+	u8 pll_address;   /* PLL addr on the secondary i2c*/
+};
+extern struct jdvbt90502_config friio_fe_config;
+
+extern struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d);
+#endif
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index aec7a1943b66..ef9b7bed13ff 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -337,6 +337,8 @@ static int m920x_firmware_download(struct usb_device *udev, const struct firmwar
 	int i, pass, ret = 0;
 
 	buff = kmalloc(65536, GFP_KERNEL);
+	if (buff == NULL)
+		return -ENOMEM;
 
 	if ((ret = m920x_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0)
 		goto done;
diff --git a/drivers/media/dvb/firewire/firedtv-avc.c b/drivers/media/dvb/firewire/firedtv-avc.c
index d1b67fe0f011..485d061319ab 100644
--- a/drivers/media/dvb/firewire/firedtv-avc.c
+++ b/drivers/media/dvb/firewire/firedtv-avc.c
@@ -1050,28 +1050,28 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length)
 	c->operand[4] = 0; /* slot */
 	c->operand[5] = SFE_VENDOR_TAG_CA_PMT; /* ca tag */
 	c->operand[6] = 0; /* more/last */
-	/* c->operand[7] = XXXprogram_info_length + 17; */ /* length */
-	c->operand[8] = list_management;
-	c->operand[9] = 0x01; /* pmt_cmd=OK_descramble */
+	/* Use three bytes for length field in case length > 127 */
+	c->operand[10] = list_management;
+	c->operand[11] = 0x01; /* pmt_cmd=OK_descramble */
 
 	/* TS program map table */
 
-	c->operand[10] = 0x02; /* Table id=2 */
-	c->operand[11] = 0x80; /* Section syntax + length */
-	/* c->operand[12] = XXXprogram_info_length + 12; */
-	c->operand[13] = msg[1]; /* Program number */
-	c->operand[14] = msg[2];
-	c->operand[15] = 0x01; /* Version number=0 + current/next=1 */
-	c->operand[16] = 0x00; /* Section number=0 */
-	c->operand[17] = 0x00; /* Last section number=0 */
-	c->operand[18] = 0x1f; /* PCR_PID=1FFF */
-	c->operand[19] = 0xff;
-	c->operand[20] = (program_info_length >> 8); /* Program info length */
-	c->operand[21] = (program_info_length & 0xff);
+	c->operand[12] = 0x02; /* Table id=2 */
+	c->operand[13] = 0x80; /* Section syntax + length */
+	/* c->operand[14] = XXXprogram_info_length + 12; */
+	c->operand[15] = msg[1]; /* Program number */
+	c->operand[16] = msg[2];
+	c->operand[17] = 0x01; /* Version number=0 + current/next=1 */
+	c->operand[18] = 0x00; /* Section number=0 */
+	c->operand[19] = 0x00; /* Last section number=0 */
+	c->operand[20] = 0x1f; /* PCR_PID=1FFF */
+	c->operand[21] = 0xff;
+	c->operand[22] = (program_info_length >> 8); /* Program info length */
+	c->operand[23] = (program_info_length & 0xff);
 
 	/* CA descriptors at programme level */
 	read_pos = 6;
-	write_pos = 22;
+	write_pos = 24;
 	if (program_info_length > 0) {
 		pmt_cmd_id = msg[read_pos++];
 		if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
@@ -1113,8 +1113,10 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length)
 	c->operand[write_pos++] = 0x00;
 	c->operand[write_pos++] = 0x00;
 
-	c->operand[7] = write_pos - 8;
-	c->operand[12] = write_pos - 13;
+	c->operand[7] = 0x82;
+	c->operand[8] = (write_pos - 10) >> 8;
+	c->operand[9] = (write_pos - 10) & 0xff;
+	c->operand[14] = write_pos - 15;
 
 	crc32_csum = crc32_be(0, &c->operand[10], c->operand[12] - 1);
 	c->operand[write_pos - 4] = (crc32_csum >> 24) & 0xff;
diff --git a/drivers/media/dvb/firewire/firedtv-ci.c b/drivers/media/dvb/firewire/firedtv-ci.c
index eeb80d0ea3ff..853e04b7cb36 100644
--- a/drivers/media/dvb/firewire/firedtv-ci.c
+++ b/drivers/media/dvb/firewire/firedtv-ci.c
@@ -215,7 +215,7 @@ static unsigned int fdtv_ca_io_poll(struct file *file, poll_table *wait)
 	return POLLIN;
 }
 
-static struct file_operations fdtv_ca_fops = {
+static const struct file_operations fdtv_ca_fops = {
 	.owner		= THIS_MODULE,
 	.ioctl		= dvb_generic_ioctl,
 	.open		= dvb_generic_open,
diff --git a/drivers/media/dvb/firewire/firedtv-fe.c b/drivers/media/dvb/firewire/firedtv-fe.c
index 7ba43630a25d..e49cdc88b0c7 100644
--- a/drivers/media/dvb/firewire/firedtv-fe.c
+++ b/drivers/media/dvb/firewire/firedtv-fe.c
@@ -141,18 +141,12 @@ static int fdtv_read_uncorrected_blocks(struct dvb_frontend *fe, u32 *ucblocks)
 	return -EOPNOTSUPP;
 }
 
-#define ACCEPTED 0x9
-
 static int fdtv_set_frontend(struct dvb_frontend *fe,
 			     struct dvb_frontend_parameters *params)
 {
 	struct firedtv *fdtv = fe->sec_priv;
 
-	/* FIXME: avc_tuner_dsd never returns ACCEPTED. Check status? */
-	if (avc_tuner_dsd(fdtv, params) != ACCEPTED)
-		return -EINVAL;
-	else
-		return 0; /* not sure of this... */
+	return avc_tuner_dsd(fdtv, params);
 }
 
 static int fdtv_get_frontend(struct dvb_frontend *fe,
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index b794e860b4e2..d7c4837fa71c 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -484,6 +484,14 @@ config DVB_S921
 	  AN ISDB-T DQPSK, QPSK, 16QAM and 64QAM 1seg tuner module.
 	  Say Y when you want to support this frontend.
 
+config DVB_DIB8000
+	tristate "DiBcom 8000MB/MC"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A driver for DiBcom's DiB8000 ISDB-T/ISDB-Tsb demodulator.
+	  Say Y when you want to support this frontend.
+
 comment "Digital terrestrial only tuners/PLL"
 	depends on DVB_CORE
 
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 3b49d37ab5fa..3523767e7a76 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_DVB_DIB3000MB) += dib3000mb.o
 obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o dibx000_common.o
 obj-$(CONFIG_DVB_DIB7000M) += dib7000m.o dibx000_common.o
 obj-$(CONFIG_DVB_DIB7000P) += dib7000p.o dibx000_common.o
+obj-$(CONFIG_DVB_DIB8000) += dib8000.o dibx000_common.o
 obj-$(CONFIG_DVB_MT312) += mt312.o
 obj-$(CONFIG_DVB_VES1820) += ves1820.o
 obj-$(CONFIG_DVB_VES1X93) += ves1x93.o
diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index 9e9a75576a1d..74981ee923c8 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -792,6 +792,11 @@ static int au8522_probe(struct i2c_client *client,
 	}
 
 	demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL);
+	if (demod_config == NULL) {
+		if (instance == 1)
+			kfree(state);
+		return -ENOMEM;
+	}
 	demod_config->demod_address = 0x8e >> 1;
 
 	state->config = demod_config;
diff --git a/drivers/media/dvb/frontends/dib0070.c b/drivers/media/dvb/frontends/dib0070.c
index da92cbe1b8ea..2be17b93e0bd 100644
--- a/drivers/media/dvb/frontends/dib0070.c
+++ b/drivers/media/dvb/frontends/dib0070.c
@@ -1,12 +1,29 @@
 /*
  * Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner.
  *
- * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
+ * Copyright (C) 2005-9 DiBcom (http://www.dibcom.fr/)
  *
  * This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * This code is more or less generated from another driver, please
+ * excuse some codingstyle oddities.
+ *
  */
+
 #include <linux/kernel.h>
 #include <linux/i2c.h>
 
@@ -19,27 +36,65 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
 
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB0070: "); printk(args); printk("\n"); } } while (0)
+#define dprintk(args...) do { \
+	if (debug) { \
+		printk(KERN_DEBUG "DiB0070: "); \
+		printk(args); \
+		printk("\n"); \
+	} \
+} while (0)
 
 #define DIB0070_P1D  0x00
 #define DIB0070_P1F  0x01
 #define DIB0070_P1G  0x03
 #define DIB0070S_P1A 0x02
 
+enum frontend_tune_state {
+	CT_TUNER_START = 10,
+	CT_TUNER_STEP_0,
+	CT_TUNER_STEP_1,
+	CT_TUNER_STEP_2,
+	CT_TUNER_STEP_3,
+	CT_TUNER_STEP_4,
+	CT_TUNER_STEP_5,
+	CT_TUNER_STEP_6,
+	CT_TUNER_STEP_7,
+	CT_TUNER_STOP,
+};
+
+#define FE_CALLBACK_TIME_NEVER 0xffffffff
+
 struct dib0070_state {
 	struct i2c_adapter *i2c;
 	struct dvb_frontend *fe;
 	const struct dib0070_config *cfg;
 	u16 wbd_ff_offset;
 	u8 revision;
+
+	enum frontend_tune_state tune_state;
+	u32 current_rf;
+
+	/* for the captrim binary search */
+	s8 step;
+	u16 adc_diff;
+
+	s8 captrim;
+	s8 fcaptrim;
+	u16 lo4;
+
+	const struct dib0070_tuning *current_tune_table_index;
+	const struct dib0070_lna_match *lna_match;
+
+	u8 wbd_gain_current;
+	u16 wbd_offset_3_3[2];
 };
 
 static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg)
 {
 	u8 b[2];
 	struct i2c_msg msg[2] = {
-		{ .addr = state->cfg->i2c_address, .flags = 0,        .buf = &reg, .len = 1 },
-		{ .addr = state->cfg->i2c_address, .flags = I2C_M_RD, .buf = b,  .len = 2 },
+		{.addr = state->cfg->i2c_address,.flags = 0,.buf = &reg,.len = 1},
+		{.addr = state->cfg->i2c_address,.flags = I2C_M_RD,.buf = b,.len = 2},
 	};
 	if (i2c_transfer(state->i2c, msg, 2) != 2) {
 		printk(KERN_WARNING "DiB0070 I2C read failed\n");
@@ -51,7 +106,7 @@ static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg)
 static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val)
 {
 	u8 b[3] = { reg, val >> 8, val & 0xff };
-	struct i2c_msg msg = { .addr = state->cfg->i2c_address, .flags = 0, .buf = b, .len = 3 };
+	struct i2c_msg msg = {.addr = state->cfg->i2c_address,.flags = 0,.buf = b,.len = 3 };
 	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
 		printk(KERN_WARNING "DiB0070 I2C write failed\n");
 		return -EREMOTEIO;
@@ -59,55 +114,71 @@ static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val)
 	return 0;
 }
 
-#define HARD_RESET(state) do { if (state->cfg->reset) { state->cfg->reset(state->fe,1); msleep(10); state->cfg->reset(state->fe,0); msleep(10); } } while (0)
+#define HARD_RESET(state) do { \
+    state->cfg->sleep(state->fe, 0); \
+    if (state->cfg->reset) { \
+	state->cfg->reset(state->fe,1); msleep(10); \
+	state->cfg->reset(state->fe,0); msleep(10); \
+    } \
+} while (0)
 
 static int dib0070_set_bandwidth(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
 {
-	struct dib0070_state *st = fe->tuner_priv;
-	u16 tmp = 0;
-	tmp = dib0070_read_reg(st, 0x02) & 0x3fff;
+	struct dib0070_state *state = fe->tuner_priv;
+	u16 tmp = dib0070_read_reg(state, 0x02) & 0x3fff;
+
+	if (state->fe->dtv_property_cache.bandwidth_hz / 1000 > 7000)
+		tmp |= (0 << 14);
+	else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 > 6000)
+		tmp |= (1 << 14);
+	else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 > 5000)
+		tmp |= (2 << 14);
+	else
+		tmp |= (3 << 14);
 
-    switch(BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth)) {
-		case  8000:
-			tmp |= (0 << 14);
-			break;
-		case  7000:
-			tmp |= (1 << 14);
-			break;
-	case  6000:
-			tmp |= (2 << 14);
-			break;
-	case 5000:
-		default:
-			tmp |= (3 << 14);
-			break;
+	dib0070_write_reg(state, 0x02, tmp);
+
+	/* sharpen the BB filter in ISDB-T to have higher immunity to adjacent channels */
+	if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT) {
+		u16 value = dib0070_read_reg(state, 0x17);
+
+		dib0070_write_reg(state, 0x17, value & 0xfffc);
+		tmp = dib0070_read_reg(state, 0x01) & 0x01ff;
+		dib0070_write_reg(state, 0x01, tmp | (60 << 9));
+
+		dib0070_write_reg(state, 0x17, value);
 	}
-	dib0070_write_reg(st, 0x02, tmp);
 	return 0;
 }
 
-static void dib0070_captrim(struct dib0070_state *st, u16 LO4)
+static int dib0070_captrim(struct dib0070_state *state, enum frontend_tune_state *tune_state)
 {
-	int8_t captrim, fcaptrim, step_sign, step;
-	u16 adc, adc_diff = 3000;
+	int8_t step_sign;
+	u16 adc;
+	int ret = 0;
 
+	if (*tune_state == CT_TUNER_STEP_0) {
 
+		dib0070_write_reg(state, 0x0f, 0xed10);
+		dib0070_write_reg(state, 0x17, 0x0034);
 
-	dib0070_write_reg(st, 0x0f, 0xed10);
-	dib0070_write_reg(st, 0x17,    0x0034);
+		dib0070_write_reg(state, 0x18, 0x0032);
+		state->step = state->captrim = state->fcaptrim = 64;
+		state->adc_diff = 3000;
+		ret = 20;
 
-	dib0070_write_reg(st, 0x18, 0x0032);
-	msleep(2);
+		*tune_state = CT_TUNER_STEP_1;
+	} else if (*tune_state == CT_TUNER_STEP_1) {
+		state->step /= 2;
+		dib0070_write_reg(state, 0x14, state->lo4 | state->captrim);
+		ret = 15;
 
-	step = captrim = fcaptrim = 64;
+		*tune_state = CT_TUNER_STEP_2;
+	} else if (*tune_state == CT_TUNER_STEP_2) {
 
-	do {
-		step /= 2;
-		dib0070_write_reg(st, 0x14, LO4 | captrim);
-		msleep(1);
-		adc = dib0070_read_reg(st, 0x19);
+		adc = dib0070_read_reg(state, 0x19);
 
-		dprintk( "CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", captrim, adc, (u32) adc*(u32)1800/(u32)1024);
+		dprintk("CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", state->captrim, adc, (u32) adc * (u32) 1800 / (u32) 1024);
 
 		if (adc >= 400) {
 			adc -= 400;
@@ -117,379 +188,430 @@ static void dib0070_captrim(struct dib0070_state *st, u16 LO4)
 			step_sign = 1;
 		}
 
-		if (adc < adc_diff) {
-			dprintk( "CAPTRIM=%hd is closer to target (%hd/%hd)", captrim, adc, adc_diff);
-			adc_diff = adc;
-			fcaptrim = captrim;
+		if (adc < state->adc_diff) {
+			dprintk("CAPTRIM=%hd is closer to target (%hd/%hd)", state->captrim, adc, state->adc_diff);
+			state->adc_diff = adc;
+			state->fcaptrim = state->captrim;
 
+		}
+		state->captrim += (step_sign * state->step);
 
+		if (state->step >= 1)
+			*tune_state = CT_TUNER_STEP_1;
+		else
+			*tune_state = CT_TUNER_STEP_3;
 
-		}
-		captrim += (step_sign * step);
-	} while (step >= 1);
+	} else if (*tune_state == CT_TUNER_STEP_3) {
+		dib0070_write_reg(state, 0x14, state->lo4 | state->fcaptrim);
+		dib0070_write_reg(state, 0x18, 0x07ff);
+		*tune_state = CT_TUNER_STEP_4;
+	}
 
-	dib0070_write_reg(st, 0x14, LO4 | fcaptrim);
-	dib0070_write_reg(st, 0x18, 0x07ff);
+	return ret;
 }
 
-#define LPF	100                       // define for the loop filter 100kHz by default 16-07-06
-#define LO4_SET_VCO_HFDIV(l, v, h)   l |= ((v) << 11) | ((h) << 7)
-#define LO4_SET_SD(l, s)             l |= ((s) << 14) | ((s) << 12)
-#define LO4_SET_CTRIM(l, c)          l |=  (c) << 10
-static int dib0070_tune_digital(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
+static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt)
 {
-	struct dib0070_state *st = fe->tuner_priv;
-	u32 freq = ch->frequency/1000 + (BAND_OF_FREQUENCY(ch->frequency/1000) == BAND_VHF ? st->cfg->freq_offset_khz_vhf : st->cfg->freq_offset_khz_uhf);
-
-	u8 band = BAND_OF_FREQUENCY(freq), c;
+	struct dib0070_state *state = fe->tuner_priv;
+	u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0);
+	dprintk("CTRL_LO5: 0x%x", lo5);
+	return dib0070_write_reg(state, 0x15, lo5);
+}
 
-	/*******************VCO***********************************/
-	u16 lo4 = 0;
+void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open)
+{
+	struct dib0070_state *state = fe->tuner_priv;
 
-	u8 REFDIV, PRESC = 2;
-	u32 FBDiv, Rest, FREF, VCOF_kHz;
-	u16 Num, Den;
-	/*******************FrontEnd******************************/
-	u16 value = 0;
+	if (open) {
+		dib0070_write_reg(state, 0x1b, 0xff00);
+		dib0070_write_reg(state, 0x1a, 0x0000);
+	} else {
+		dib0070_write_reg(state, 0x1b, 0x4112);
+		if (state->cfg->vga_filter != 0) {
+			dib0070_write_reg(state, 0x1a, state->cfg->vga_filter);
+			dprintk("vga filter register is set to %x", state->cfg->vga_filter);
+		} else
+			dib0070_write_reg(state, 0x1a, 0x0009);
+	}
+}
 
-	dprintk( "Tuning for Band: %hd (%d kHz)", band, freq);
+EXPORT_SYMBOL(dib0070_ctrl_agc_filter);
+struct dib0070_tuning {
+	u32 max_freq;		/* for every frequency less than or equal to that field: this information is correct */
+	u8 switch_trim;
+	u8 vco_band;
+	u8 hfdiv;
+	u8 vco_multi;
+	u8 presc;
+	u8 wbdmux;
+	u16 tuner_enable;
+};
 
+struct dib0070_lna_match {
+	u32 max_freq;		/* for every frequency less than or equal to that field: this information is correct */
+	u8 lna_band;
+};
 
-	dib0070_write_reg(st, 0x17, 0x30);
+static const struct dib0070_tuning dib0070s_tuning_table[] = {
+	{570000, 2, 1, 3, 6, 6, 2, 0x4000 | 0x0800},	/* UHF */
+	{700000, 2, 0, 2, 4, 2, 2, 0x4000 | 0x0800},
+	{863999, 2, 1, 2, 4, 2, 2, 0x4000 | 0x0800},
+	{1500000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400},	/* LBAND */
+	{1600000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400},
+	{2000000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400},
+	{0xffffffff, 0, 0, 8, 1, 2, 1, 0x8000 | 0x1000},	/* SBAND */
+};
 
-	dib0070_set_bandwidth(fe, ch);	/* c is used as HF */
-	switch (st->revision) {
-		case DIB0070S_P1A:
-			switch (band) {
-				case BAND_LBAND:
-					LO4_SET_VCO_HFDIV(lo4, 1, 1);
-					c = 2;
-					break;
-				case BAND_SBAND:
-					LO4_SET_VCO_HFDIV(lo4, 0, 0);
-					LO4_SET_CTRIM(lo4, 1);
-					c = 1;
-					break;
-				case BAND_UHF:
-				default:
-					if (freq < 570000) {
-						LO4_SET_VCO_HFDIV(lo4, 1, 3);
-						PRESC = 6; c = 6;
-					} else if (freq < 680000) {
-						LO4_SET_VCO_HFDIV(lo4, 0, 2);
-						c = 4;
-					} else {
-						LO4_SET_VCO_HFDIV(lo4, 1, 2);
-						c = 4;
-					}
-					break;
-			} break;
-
-		case DIB0070_P1G:
-		case DIB0070_P1F:
-		default:
-			switch (band) {
-				case BAND_FM:
-						LO4_SET_VCO_HFDIV(lo4, 0, 7);
-						c = 24;
-					break;
-				case BAND_LBAND:
-						LO4_SET_VCO_HFDIV(lo4, 1, 0);
-						c = 2;
-					break;
-				case BAND_VHF:
-					if (freq < 180000) {
-						LO4_SET_VCO_HFDIV(lo4, 0, 3);
-						c = 16;
-					} else if (freq < 190000) {
-						LO4_SET_VCO_HFDIV(lo4, 1, 3);
-						c = 16;
-					} else {
-						LO4_SET_VCO_HFDIV(lo4, 0, 6);
-						c = 12;
-					}
-					break;
-
-				case BAND_UHF:
-				default:
-					if (freq < 570000) {
-						LO4_SET_VCO_HFDIV(lo4, 1, 5);
-						c = 6;
-					} else if (freq < 700000) {
-						LO4_SET_VCO_HFDIV(lo4, 0, 1);
-						c = 4;
-					} else {
-						LO4_SET_VCO_HFDIV(lo4, 1, 1);
-						c = 4;
-					}
-					break;
-			}
-		break;
-	}
+static const struct dib0070_tuning dib0070_tuning_table[] = {
+	{115000, 1, 0, 7, 24, 2, 1, 0x8000 | 0x1000},	/* FM below 92MHz cannot be tuned */
+	{179500, 1, 0, 3, 16, 2, 1, 0x8000 | 0x1000},	/* VHF */
+	{189999, 1, 1, 3, 16, 2, 1, 0x8000 | 0x1000},
+	{250000, 1, 0, 6, 12, 2, 1, 0x8000 | 0x1000},
+	{569999, 2, 1, 5, 6, 2, 2, 0x4000 | 0x0800},	/* UHF */
+	{699999, 2, 0, 1, 4, 2, 2, 0x4000 | 0x0800},
+	{863999, 2, 1, 1, 4, 2, 2, 0x4000 | 0x0800},
+	{0xffffffff, 0, 1, 0, 2, 2, 4, 0x2000 | 0x0400},	/* LBAND or everything higher than UHF */
+};
 
-	dprintk( "HFDIV code: %hd", (lo4 >> 7) & 0xf);
-	dprintk( "VCO = %hd", (lo4 >> 11) & 0x3);
+static const struct dib0070_lna_match dib0070_lna_flip_chip[] = {
+	{180000, 0},		/* VHF */
+	{188000, 1},
+	{196400, 2},
+	{250000, 3},
+	{550000, 0},		/* UHF */
+	{590000, 1},
+	{666000, 3},
+	{864000, 5},
+	{1500000, 0},		/* LBAND or everything higher than UHF */
+	{1600000, 1},
+	{2000000, 3},
+	{0xffffffff, 7},
+};
 
+static const struct dib0070_lna_match dib0070_lna[] = {
+	{180000, 0},		/* VHF */
+	{188000, 1},
+	{196400, 2},
+	{250000, 3},
+	{550000, 2},		/* UHF */
+	{650000, 3},
+	{750000, 5},
+	{850000, 6},
+	{864000, 7},
+	{1500000, 0},		/* LBAND or everything higher than UHF */
+	{1600000, 1},
+	{2000000, 3},
+	{0xffffffff, 7},
+};
 
-	VCOF_kHz = (c * freq) * 2;
-	dprintk( "VCOF in kHz: %d ((%hd*%d) << 1))",VCOF_kHz, c, freq);
+#define LPF	100		// define for the loop filter 100kHz by default 16-07-06
+static int dib0070_tune_digital(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
+{
+	struct dib0070_state *state = fe->tuner_priv;
 
-	switch (band) {
-		case BAND_VHF:
-			REFDIV = (u8) ((st->cfg->clock_khz + 9999) / 10000);
-			break;
-		case BAND_FM:
-			REFDIV = (u8) ((st->cfg->clock_khz) / 1000);
-			break;
-		default:
-			REFDIV = (u8) ( st->cfg->clock_khz  / 10000);
-			break;
-	}
-	FREF = st->cfg->clock_khz / REFDIV;
+	const struct dib0070_tuning *tune;
+	const struct dib0070_lna_match *lna_match;
 
-	dprintk( "REFDIV: %hd, FREF: %d", REFDIV, FREF);
+	enum frontend_tune_state *tune_state = &state->tune_state;
+	int ret = 10;		/* 1ms is the default delay most of the time */
 
+	u8 band = (u8) BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000);
+	u32 freq = fe->dtv_property_cache.frequency / 1000 + (band == BAND_VHF ? state->cfg->freq_offset_khz_vhf : state->cfg->freq_offset_khz_uhf);
 
+#ifdef CONFIG_SYS_ISDBT
+	if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT && state->fe->dtv_property_cache.isdbt_sb_mode == 1)
+		if (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2)
+		     && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))
+		    || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
+			&& (state->fe->dtv_property_cache.isdbt_sb_segment_idx == (state->fe->dtv_property_cache.isdbt_sb_segment_count / 2)))
+		    || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
+			&& (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1))))
+			freq += 850;
+#endif
+	if (state->current_rf != freq) {
 
-	switch (st->revision) {
+		switch (state->revision) {
 		case DIB0070S_P1A:
-			FBDiv = (VCOF_kHz / PRESC / FREF);
-			Rest  = (VCOF_kHz / PRESC) - FBDiv * FREF;
+			tune = dib0070s_tuning_table;
+			lna_match = dib0070_lna;
 			break;
-
-		case DIB0070_P1G:
-		case DIB0070_P1F:
 		default:
-			FBDiv = (freq / (FREF / 2));
-			Rest  = 2 * freq - FBDiv * FREF;
+			tune = dib0070_tuning_table;
+			if (state->cfg->flip_chip)
+				lna_match = dib0070_lna_flip_chip;
+			else
+				lna_match = dib0070_lna;
 			break;
-	}
-
-
-	     if (Rest < LPF)              Rest = 0;
-	else if (Rest < 2 * LPF)          Rest = 2 * LPF;
-	else if (Rest > (FREF - LPF))   { Rest = 0 ; FBDiv += 1; }
-	else if (Rest > (FREF - 2 * LPF)) Rest = FREF - 2 * LPF;
-	Rest = (Rest * 6528) / (FREF / 10);
-	dprintk( "FBDIV: %d, Rest: %d", FBDiv, Rest);
-
-	Num = 0;
-	Den = 1;
+		}
+		while (freq > tune->max_freq)	/* find the right one */
+			tune++;
+		while (freq > lna_match->max_freq)	/* find the right one */
+			lna_match++;
 
-	if (Rest > 0) {
-		LO4_SET_SD(lo4, 1);
-		Den = 255;
-		Num = (u16)Rest;
+		state->current_tune_table_index = tune;
+		state->lna_match = lna_match;
 	}
-	dprintk( "Num: %hd, Den: %hd, SD: %hd",Num, Den, (lo4 >> 12) & 0x1);
 
+	if (*tune_state == CT_TUNER_START) {
+		dprintk("Tuning for Band: %hd (%d kHz)", band, freq);
+		if (state->current_rf != freq) {
+			u8 REFDIV;
+			u32 FBDiv, Rest, FREF, VCOF_kHz;
+			u8 Den;
 
+			state->current_rf = freq;
+			state->lo4 = (state->current_tune_table_index->vco_band << 11) | (state->current_tune_table_index->hfdiv << 7);
 
-	dib0070_write_reg(st, 0x11, (u16)FBDiv);
+			dib0070_write_reg(state, 0x17, 0x30);
 
+			VCOF_kHz = state->current_tune_table_index->vco_multi * freq * 2;
 
-	dib0070_write_reg(st, 0x12, (Den << 8) | REFDIV);
-
+			switch (band) {
+			case BAND_VHF:
+				REFDIV = (u8) ((state->cfg->clock_khz + 9999) / 10000);
+				break;
+			case BAND_FM:
+				REFDIV = (u8) ((state->cfg->clock_khz) / 1000);
+				break;
+			default:
+				REFDIV = (u8) (state->cfg->clock_khz / 10000);
+				break;
+			}
+			FREF = state->cfg->clock_khz / REFDIV;
+
+			switch (state->revision) {
+			case DIB0070S_P1A:
+				FBDiv = (VCOF_kHz / state->current_tune_table_index->presc / FREF);
+				Rest = (VCOF_kHz / state->current_tune_table_index->presc) - FBDiv * FREF;
+				break;
+
+			case DIB0070_P1G:
+			case DIB0070_P1F:
+			default:
+				FBDiv = (freq / (FREF / 2));
+				Rest = 2 * freq - FBDiv * FREF;
+				break;
+			}
 
-	dib0070_write_reg(st, 0x13, Num);
+			if (Rest < LPF)
+				Rest = 0;
+			else if (Rest < 2 * LPF)
+				Rest = 2 * LPF;
+			else if (Rest > (FREF - LPF)) {
+				Rest = 0;
+				FBDiv += 1;
+			} else if (Rest > (FREF - 2 * LPF))
+				Rest = FREF - 2 * LPF;
+			Rest = (Rest * 6528) / (FREF / 10);
+
+			Den = 1;
+			if (Rest > 0) {
+				state->lo4 |= (1 << 14) | (1 << 12);
+				Den = 255;
+			}
 
+			dib0070_write_reg(state, 0x11, (u16) FBDiv);
+			dib0070_write_reg(state, 0x12, (Den << 8) | REFDIV);
+			dib0070_write_reg(state, 0x13, (u16) Rest);
 
-	value = 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001;
+			if (state->revision == DIB0070S_P1A) {
 
-	switch (band) {
-		case BAND_UHF:   value |= 0x4000 | 0x0800; break;
-		case BAND_LBAND: value |= 0x2000 | 0x0400; break;
-		default:         value |= 0x8000 | 0x1000; break;
-	}
-	dib0070_write_reg(st, 0x20, value);
+				if (band == BAND_SBAND) {
+					dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0);
+					dib0070_write_reg(state, 0x1d, 0xFFFF);
+				} else
+					dib0070_set_ctrl_lo5(fe, 5, 4, 3, 1);
+			}
 
-	dib0070_captrim(st, lo4);
-	if (st->revision == DIB0070S_P1A) {
-		if (band == BAND_SBAND)
-			dib0070_write_reg(st, 0x15, 0x16e2);
-		else
-			dib0070_write_reg(st, 0x15, 0x56e5);
-	}
+			dib0070_write_reg(state, 0x20,
+					  0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001 | state->current_tune_table_index->tuner_enable);
 
+			dprintk("REFDIV: %hd, FREF: %d", REFDIV, FREF);
+			dprintk("FBDIV: %d, Rest: %d", FBDiv, Rest);
+			dprintk("Num: %hd, Den: %hd, SD: %hd", (u16) Rest, Den, (state->lo4 >> 12) & 0x1);
+			dprintk("HFDIV code: %hd", state->current_tune_table_index->hfdiv);
+			dprintk("VCO = %hd", state->current_tune_table_index->vco_band);
+			dprintk("VCOF: ((%hd*%d) << 1))", state->current_tune_table_index->vco_multi, freq);
 
+			*tune_state = CT_TUNER_STEP_0;
+		} else {	/* we are already tuned to this frequency - the configuration is correct  */
+			ret = 50;	/* wakeup time */
+			*tune_state = CT_TUNER_STEP_5;
+		}
+	} else if ((*tune_state > CT_TUNER_START) && (*tune_state < CT_TUNER_STEP_4)) {
+
+		ret = dib0070_captrim(state, tune_state);
+
+	} else if (*tune_state == CT_TUNER_STEP_4) {
+		const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain;
+		if (tmp != NULL) {
+			while (freq / 1000 > tmp->freq)	/* find the right one */
+				tmp++;
+			dib0070_write_reg(state, 0x0f,
+					  (0 << 15) | (1 << 14) | (3 << 12) | (tmp->wbd_gain_val << 9) | (0 << 8) | (1 << 7) | (state->
+																current_tune_table_index->
+																wbdmux << 0));
+			state->wbd_gain_current = tmp->wbd_gain_val;
+		} else {
+			dib0070_write_reg(state, 0x0f,
+					  (0 << 15) | (1 << 14) | (3 << 12) | (6 << 9) | (0 << 8) | (1 << 7) | (state->current_tune_table_index->
+														wbdmux << 0));
+			state->wbd_gain_current = 6;
+		}
 
-	switch (band) {
-		case BAND_UHF:   value = 0x7c82; break;
-		case BAND_LBAND: value = 0x7c84; break;
-		default:         value = 0x7c81; break;
-	}
-	dib0070_write_reg(st, 0x0f, value);
-	dib0070_write_reg(st, 0x06, 0x3fff);
-
-	/* Front End */
-	/* c == TUNE, value = SWITCH */
-	c = 0;
-	value = 0;
-	switch (band) {
-		case BAND_FM:
-			c = 0; value = 1;
-		break;
-
-		case BAND_VHF:
-			if (freq <= 180000) c = 0;
-			else if (freq <= 188200) c = 1;
-			else if (freq <= 196400) c = 2;
-			else c = 3;
-			value = 1;
-		break;
-
-		case BAND_LBAND:
-			if (freq <= 1500000) c = 0;
-			else if (freq <= 1600000) c = 1;
-			else c = 3;
-		break;
-
-		case BAND_SBAND:
-			c = 7;
-			dib0070_write_reg(st, 0x1d,0xFFFF);
-		break;
-
-		case BAND_UHF:
-		default:
-			if (st->cfg->flip_chip) {
-				if (freq <= 550000) c = 0;
-				else if (freq <= 590000) c = 1;
-				else if (freq <= 666000) c = 3;
-				else c = 5;
-			} else {
-				if (freq <= 550000) c = 2;
-				else if (freq <= 650000) c = 3;
-				else if (freq <= 750000) c = 5;
-				else if (freq <= 850000) c = 6;
-				else c = 7;
-			}
-			value = 2;
-		break;
+		dib0070_write_reg(state, 0x06, 0x3fff);
+		dib0070_write_reg(state, 0x07,
+				  (state->current_tune_table_index->switch_trim << 11) | (7 << 8) | (state->lna_match->lna_band << 3) | (3 << 0));
+		dib0070_write_reg(state, 0x08, (state->lna_match->lna_band << 10) | (3 << 7) | (127));
+		dib0070_write_reg(state, 0x0d, 0x0d80);
+
+		dib0070_write_reg(state, 0x18, 0x07ff);
+		dib0070_write_reg(state, 0x17, 0x0033);
+
+		*tune_state = CT_TUNER_STEP_5;
+	} else if (*tune_state == CT_TUNER_STEP_5) {
+		dib0070_set_bandwidth(fe, ch);
+		*tune_state = CT_TUNER_STOP;
+	} else {
+		ret = FE_CALLBACK_TIME_NEVER;	/* tuner finished, time to call again infinite */
 	}
+	return ret;
+}
 
-	/* default: LNA_MATCH=7, BIAS=3 */
-	dib0070_write_reg(st, 0x07, (value << 11) | (7 << 8) | (c << 3) | (3 << 0));
-	dib0070_write_reg(st, 0x08, (c << 10) | (3 << 7) | (127));
-	dib0070_write_reg(st, 0x0d, 0x0d80);
+static int dib0070_tune(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
+{
+	struct dib0070_state *state = fe->tuner_priv;
+	uint32_t ret;
 
+	state->tune_state = CT_TUNER_START;
 
-	dib0070_write_reg(st, 0x18,   0x07ff);
-	dib0070_write_reg(st, 0x17, 0x0033);
+	do {
+		ret = dib0070_tune_digital(fe, p);
+		if (ret != FE_CALLBACK_TIME_NEVER)
+			msleep(ret / 10);
+		else
+			break;
+	} while (state->tune_state != CT_TUNER_STOP);
 
 	return 0;
 }
 
 static int dib0070_wakeup(struct dvb_frontend *fe)
 {
-	struct dib0070_state *st = fe->tuner_priv;
-	if (st->cfg->sleep)
-		st->cfg->sleep(fe, 0);
+	struct dib0070_state *state = fe->tuner_priv;
+	if (state->cfg->sleep)
+		state->cfg->sleep(fe, 0);
 	return 0;
 }
 
 static int dib0070_sleep(struct dvb_frontend *fe)
 {
-	struct dib0070_state *st = fe->tuner_priv;
-	if (st->cfg->sleep)
-		st->cfg->sleep(fe, 1);
+	struct dib0070_state *state = fe->tuner_priv;
+	if (state->cfg->sleep)
+		state->cfg->sleep(fe, 1);
 	return 0;
 }
 
-static u16 dib0070_p1f_defaults[] =
-
-{
+static const u16 dib0070_p1f_defaults[] = {
 	7, 0x02,
-		0x0008,
-		0x0000,
-		0x0000,
-		0x0000,
-		0x0000,
-		0x0002,
-		0x0100,
+	0x0008,
+	0x0000,
+	0x0000,
+	0x0000,
+	0x0000,
+	0x0002,
+	0x0100,
 
 	3, 0x0d,
-		0x0d80,
-		0x0001,
-		0x0000,
+	0x0d80,
+	0x0001,
+	0x0000,
 
 	4, 0x11,
-		0x0000,
-		0x0103,
-		0x0000,
-		0x0000,
+	0x0000,
+	0x0103,
+	0x0000,
+	0x0000,
 
 	3, 0x16,
-		0x0004 | 0x0040,
-		0x0030,
-		0x07ff,
+	0x0004 | 0x0040,
+	0x0030,
+	0x07ff,
 
 	6, 0x1b,
-		0x4112,
-		0xff00,
-		0xc07f,
-		0x0000,
-		0x0180,
-		0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001,
+	0x4112,
+	0xff00,
+	0xc07f,
+	0x0000,
+	0x0180,
+	0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001,
 
 	0,
 };
 
-static void dib0070_wbd_calibration(struct dvb_frontend *fe)
+static u16 dib0070_read_wbd_offset(struct dib0070_state *state, u8 gain)
 {
-	u16 wbd_offs;
-	struct dib0070_state *state = fe->tuner_priv;
-
-	if (state->cfg->sleep)
-		state->cfg->sleep(fe, 0);
+	u16 tuner_en = dib0070_read_reg(state, 0x20);
+	u16 offset;
 
-	dib0070_write_reg(state, 0x0f, 0x6d81);
-	dib0070_write_reg(state, 0x20, 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001);
+	dib0070_write_reg(state, 0x18, 0x07ff);
+	dib0070_write_reg(state, 0x20, 0x0800 | 0x4000 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001);
+	dib0070_write_reg(state, 0x0f, (1 << 14) | (2 << 12) | (gain << 9) | (1 << 8) | (1 << 7) | (0 << 0));
 	msleep(9);
-	wbd_offs = dib0070_read_reg(state, 0x19);
-	dib0070_write_reg(state, 0x20, 0);
-	state->wbd_ff_offset = ((wbd_offs * 8 * 18 / 33 + 1) / 2);
-	dprintk( "WBDStart = %d (Vargen) - FF = %hd", (u32) wbd_offs * 1800/1024, state->wbd_ff_offset);
-
-	if (state->cfg->sleep)
-		state->cfg->sleep(fe, 1);
-
+	offset = dib0070_read_reg(state, 0x19);
+	dib0070_write_reg(state, 0x20, tuner_en);
+	return offset;
 }
 
-u16 dib0070_wbd_offset(struct dvb_frontend *fe)
+static void dib0070_wbd_offset_calibration(struct dib0070_state *state)
 {
-	struct dib0070_state *st = fe->tuner_priv;
-	return st->wbd_ff_offset;
+	u8 gain;
+	for (gain = 6; gain < 8; gain++) {
+		state->wbd_offset_3_3[gain - 6] = ((dib0070_read_wbd_offset(state, gain) * 8 * 18 / 33 + 1) / 2);
+		dprintk("Gain: %d, WBDOffset (3.3V) = %hd", gain, state->wbd_offset_3_3[gain - 6]);
+	}
 }
 
-EXPORT_SYMBOL(dib0070_wbd_offset);
-static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt)
+u16 dib0070_wbd_offset(struct dvb_frontend *fe)
 {
 	struct dib0070_state *state = fe->tuner_priv;
-    u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0);
-	dprintk( "CTRL_LO5: 0x%x", lo5);
-	return dib0070_write_reg(state, 0x15, lo5);
+	const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain;
+	u32 freq = fe->dtv_property_cache.frequency / 1000;
+
+	if (tmp != NULL) {
+		while (freq / 1000 > tmp->freq)	/* find the right one */
+			tmp++;
+		state->wbd_gain_current = tmp->wbd_gain_val;
+	} else
+		state->wbd_gain_current = 6;
+
+	return state->wbd_offset_3_3[state->wbd_gain_current - 6];
 }
 
+EXPORT_SYMBOL(dib0070_wbd_offset);
+
 #define pgm_read_word(w) (*w)
-static int dib0070_reset(struct dib0070_state *state)
+static int dib0070_reset(struct dvb_frontend *fe)
 {
+	struct dib0070_state *state = fe->tuner_priv;
 	u16 l, r, *n;
 
 	HARD_RESET(state);
 
-
 #ifndef FORCE_SBAND_TUNER
 	if ((dib0070_read_reg(state, 0x22) >> 9) & 0x1)
 		state->revision = (dib0070_read_reg(state, 0x1f) >> 8) & 0xff;
 	else
+#else
+#warning forcing SBAND
 #endif
-		state->revision = DIB0070S_P1A;
+	state->revision = DIB0070S_P1A;
 
 	/* P1F or not */
-	dprintk( "Revision: %x", state->revision);
+	dprintk("Revision: %x", state->revision);
 
 	if (state->revision == DIB0070_P1D) {
-		dprintk( "Error: this driver is not to be used meant for P1D or earlier");
+		dprintk("Error: this driver is not to be used meant for P1D or earlier");
 		return -EINVAL;
 	}
 
@@ -498,7 +620,7 @@ static int dib0070_reset(struct dib0070_state *state)
 	while (l) {
 		r = pgm_read_word(n++);
 		do {
-			dib0070_write_reg(state, (u8)r, pgm_read_word(n++));
+			dib0070_write_reg(state, (u8) r, pgm_read_word(n++));
 			r++;
 		} while (--l);
 		l = pgm_read_word(n++);
@@ -514,24 +636,25 @@ static int dib0070_reset(struct dib0070_state *state)
 	r |= state->cfg->osc_buffer_state << 3;
 
 	dib0070_write_reg(state, 0x10, r);
-	dib0070_write_reg(state, 0x1f, (1 << 8) | ((state->cfg->clock_pad_drive & 0xf) << 4));
+	dib0070_write_reg(state, 0x1f, (1 << 8) | ((state->cfg->clock_pad_drive & 0xf) << 5));
 
 	if (state->cfg->invert_iq) {
 		r = dib0070_read_reg(state, 0x02) & 0xffdf;
 		dib0070_write_reg(state, 0x02, r | (1 << 5));
 	}
 
-
 	if (state->revision == DIB0070S_P1A)
-		dib0070_set_ctrl_lo5(state->fe, 4, 7, 3, 1);
+		dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0);
 	else
-		dib0070_set_ctrl_lo5(state->fe, 4, 4, 2, 0);
+		dib0070_set_ctrl_lo5(fe, 5, 4, state->cfg->charge_pump, state->cfg->enable_third_order_filter);
 
 	dib0070_write_reg(state, 0x01, (54 << 9) | 0xc8);
+
+	dib0070_wbd_offset_calibration(state);
+
 	return 0;
 }
 
-
 static int dib0070_release(struct dvb_frontend *fe)
 {
 	kfree(fe->tuner_priv);
@@ -539,23 +662,24 @@ static int dib0070_release(struct dvb_frontend *fe)
 	return 0;
 }
 
-static struct dvb_tuner_ops dib0070_ops = {
+static const struct dvb_tuner_ops dib0070_ops = {
 	.info = {
-		.name           = "DiBcom DiB0070",
-		.frequency_min  =  45000000,
-		.frequency_max  = 860000000,
-		.frequency_step =      1000,
-	},
-	.release       = dib0070_release,
-
-	.init          = dib0070_wakeup,
-	.sleep         = dib0070_sleep,
-	.set_params    = dib0070_tune_digital,
-//	.get_frequency = dib0070_get_frequency,
-//	.get_bandwidth = dib0070_get_bandwidth
+		 .name = "DiBcom DiB0070",
+		 .frequency_min = 45000000,
+		 .frequency_max = 860000000,
+		 .frequency_step = 1000,
+		 },
+	.release = dib0070_release,
+
+	.init = dib0070_wakeup,
+	.sleep = dib0070_sleep,
+	.set_params = dib0070_tune,
+
+//      .get_frequency = dib0070_get_frequency,
+//      .get_bandwidth = dib0070_get_bandwidth
 };
 
-struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg)
+struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg)
 {
 	struct dib0070_state *state = kzalloc(sizeof(struct dib0070_state), GFP_KERNEL);
 	if (state == NULL)
@@ -563,25 +687,24 @@ struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter
 
 	state->cfg = cfg;
 	state->i2c = i2c;
-	state->fe  = fe;
+	state->fe = fe;
 	fe->tuner_priv = state;
 
-	if (dib0070_reset(state) != 0)
+	if (dib0070_reset(fe) != 0)
 		goto free_mem;
 
-	dib0070_wbd_calibration(fe);
-
 	printk(KERN_INFO "DiB0070: successfully identified\n");
 	memcpy(&fe->ops.tuner_ops, &dib0070_ops, sizeof(struct dvb_tuner_ops));
 
 	fe->tuner_priv = state;
 	return fe;
 
-free_mem:
+ free_mem:
 	kfree(state);
 	fe->tuner_priv = NULL;
 	return NULL;
 }
+
 EXPORT_SYMBOL(dib0070_attach);
 
 MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h
index 9670f5d20cfb..eec9e52ffa75 100644
--- a/drivers/media/dvb/frontends/dib0070.h
+++ b/drivers/media/dvb/frontends/dib0070.h
@@ -15,6 +15,11 @@ struct i2c_adapter;
 
 #define DEFAULT_DIB0070_I2C_ADDRESS 0x60
 
+struct dib0070_wbd_gain_cfg {
+	u16 freq;
+	u16 wbd_gain_val;
+};
+
 struct dib0070_config {
 	u8 i2c_address;
 
@@ -26,26 +31,29 @@ struct dib0070_config {
 	int freq_offset_khz_uhf;
 	int freq_offset_khz_vhf;
 
-	u8 osc_buffer_state; /* 0= normal, 1= tri-state */
-	u32  clock_khz;
-	u8 clock_pad_drive; /* (Drive + 1) * 2mA */
+	u8 osc_buffer_state;	/* 0= normal, 1= tri-state */
+	u32 clock_khz;
+	u8 clock_pad_drive;	/* (Drive + 1) * 2mA */
 
-	u8 invert_iq; /* invert Q - in case I or Q is inverted on the board */
+	u8 invert_iq;		/* invert Q - in case I or Q is inverted on the board */
 
-	u8 force_crystal_mode; /* if == 0 -> decision is made in the driver default: <24 -> 2, >=24 -> 1 */
+	u8 force_crystal_mode;	/* if == 0 -> decision is made in the driver default: <24 -> 2, >=24 -> 1 */
 
 	u8 flip_chip;
+	u8 enable_third_order_filter;
+	u8 charge_pump;
+
+	const struct dib0070_wbd_gain_cfg *wbd_gain;
+
+	u8 vga_filter;
 };
 
 #if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE))
-extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
-					   struct i2c_adapter *i2c,
-					   struct dib0070_config *cfg);
+extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg);
 extern u16 dib0070_wbd_offset(struct dvb_frontend *);
+extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open);
 #else
-static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
-						  struct i2c_adapter *i2c,
-						  struct dib0070_config *cfg)
+static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg)
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
@@ -56,6 +64,11 @@ static inline u16 dib0070_wbd_offset(struct dvb_frontend *fe)
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return -ENODEV;
 }
+
+static inline void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+}
 #endif
 
 #endif
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index fc96fbf03d6d..0781f94e05d2 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/i2c.h>
 
+#include "dvb_math.h"
 #include "dvb_frontend.h"
 
 #include "dib7000p.h"
@@ -1217,7 +1218,37 @@ static int dib7000p_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
 
 static int dib7000p_read_snr(struct dvb_frontend* fe, u16 *snr)
 {
-	*snr = 0x0000;
+	struct dib7000p_state *state = fe->demodulator_priv;
+	u16 val;
+	s32 signal_mant, signal_exp, noise_mant, noise_exp;
+	u32 result = 0;
+
+	val = dib7000p_read_word(state, 479);
+	noise_mant = (val >> 4) & 0xff;
+	noise_exp = ((val & 0xf) << 2);
+	val = dib7000p_read_word(state, 480);
+	noise_exp += ((val >> 14) & 0x3);
+	if ((noise_exp & 0x20) != 0)
+		noise_exp -= 0x40;
+
+	signal_mant = (val >> 6) & 0xFF;
+	signal_exp  = (val & 0x3F);
+	if ((signal_exp & 0x20) != 0)
+		signal_exp -= 0x40;
+
+	if (signal_mant != 0)
+		result = intlog10(2) * 10 * signal_exp + 10 *
+			intlog10(signal_mant);
+	else
+		result = intlog10(2) * 10 * signal_exp - 100;
+
+	if (noise_mant != 0)
+		result -= intlog10(2) * 10 * noise_exp + 10 *
+			intlog10(noise_mant);
+	else
+		result -= intlog10(2) * 10 * noise_exp - 100;
+
+	*snr = result / ((1 << 24) / 10);
 	return 0;
 }
 
@@ -1344,6 +1375,11 @@ struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr,
 	if (dib7000p_identify(st) != 0)
 		goto error;
 
+	/* FIXME: make sure the dev.parent field is initialized, or else
+	request_firmware() will hit an OOPS (this should be moved somewhere
+	more common) */
+	st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent;
+
 	dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr);
 
 	dib7000p_demod_reset(st);
diff --git a/drivers/media/dvb/frontends/dib8000.c b/drivers/media/dvb/frontends/dib8000.c
new file mode 100644
index 000000000000..852c790d09d9
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib8000.c
@@ -0,0 +1,2277 @@
+/*
+ * Linux-DVB Driver for DiBcom's DiB8000 chip (ISDB-T).
+ *
+ * Copyright (C) 2009 DiBcom (http://www.dibcom.fr/)
+ *
+ * This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License as
+ *  published by the Free Software Foundation, version 2.
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include "dvb_math.h"
+
+#include "dvb_frontend.h"
+
+#include "dib8000.h"
+
+#define LAYER_ALL -1
+#define LAYER_A   1
+#define LAYER_B   2
+#define LAYER_C   3
+
+#define FE_CALLBACK_TIME_NEVER 0xffffffff
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+
+#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB8000: "); printk(args); printk("\n"); } } while (0)
+
+enum frontend_tune_state {
+	CT_AGC_START = 20,
+	CT_AGC_STEP_0,
+	CT_AGC_STEP_1,
+	CT_AGC_STEP_2,
+	CT_AGC_STEP_3,
+	CT_AGC_STEP_4,
+	CT_AGC_STOP,
+
+	CT_DEMOD_START = 30,
+};
+
+#define FE_STATUS_TUNE_FAILED 0
+
+struct i2c_device {
+	struct i2c_adapter *adap;
+	u8 addr;
+};
+
+struct dib8000_state {
+	struct dvb_frontend fe;
+	struct dib8000_config cfg;
+
+	struct i2c_device i2c;
+
+	struct dibx000_i2c_master i2c_master;
+
+	u16 wbd_ref;
+
+	u8 current_band;
+	u32 current_bandwidth;
+	struct dibx000_agc_config *current_agc;
+	u32 timf;
+	u32 timf_default;
+
+	u8 div_force_off:1;
+	u8 div_state:1;
+	u16 div_sync_wait;
+
+	u8 agc_state;
+	u8 differential_constellation;
+	u8 diversity_onoff;
+
+	s16 ber_monitored_layer;
+	u16 gpio_dir;
+	u16 gpio_val;
+
+	u16 revision;
+	u8 isdbt_cfg_loaded;
+	enum frontend_tune_state tune_state;
+	u32 status;
+};
+
+enum dib8000_power_mode {
+	DIB8000M_POWER_ALL = 0,
+	DIB8000M_POWER_INTERFACE_ONLY,
+};
+
+static u16 dib8000_i2c_read16(struct i2c_device *i2c, u16 reg)
+{
+	u8 wb[2] = { reg >> 8, reg & 0xff };
+	u8 rb[2];
+	struct i2c_msg msg[2] = {
+		{.addr = i2c->addr >> 1,.flags = 0,.buf = wb,.len = 2},
+		{.addr = i2c->addr >> 1,.flags = I2C_M_RD,.buf = rb,.len = 2},
+	};
+
+	if (i2c_transfer(i2c->adap, msg, 2) != 2)
+		dprintk("i2c read error on %d", reg);
+
+	return (rb[0] << 8) | rb[1];
+}
+
+static u16 dib8000_read_word(struct dib8000_state *state, u16 reg)
+{
+	return dib8000_i2c_read16(&state->i2c, reg);
+}
+
+static u32 dib8000_read32(struct dib8000_state *state, u16 reg)
+{
+	u16 rw[2];
+
+	rw[0] = dib8000_read_word(state, reg + 0);
+	rw[1] = dib8000_read_word(state, reg + 1);
+
+	return ((rw[0] << 16) | (rw[1]));
+}
+
+static int dib8000_i2c_write16(struct i2c_device *i2c, u16 reg, u16 val)
+{
+	u8 b[4] = {
+		(reg >> 8) & 0xff, reg & 0xff,
+		(val >> 8) & 0xff, val & 0xff,
+	};
+	struct i2c_msg msg = {
+		.addr = i2c->addr >> 1,.flags = 0,.buf = b,.len = 4
+	};
+	return i2c_transfer(i2c->adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
+}
+
+static int dib8000_write_word(struct dib8000_state *state, u16 reg, u16 val)
+{
+	return dib8000_i2c_write16(&state->i2c, reg, val);
+}
+
+const int16_t coeff_2k_sb_1seg_dqpsk[8] = {
+	(769 << 5) | 0x0a, (745 << 5) | 0x03, (595 << 5) | 0x0d, (769 << 5) | 0x0a, (920 << 5) | 0x09, (784 << 5) | 0x02, (519 << 5) | 0x0c,
+	    (920 << 5) | 0x09
+};
+
+const int16_t coeff_2k_sb_1seg[8] = {
+	(692 << 5) | 0x0b, (683 << 5) | 0x01, (519 << 5) | 0x09, (692 << 5) | 0x0b, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f
+};
+
+const int16_t coeff_2k_sb_3seg_0dqpsk_1dqpsk[8] = {
+	(832 << 5) | 0x10, (912 << 5) | 0x05, (900 << 5) | 0x12, (832 << 5) | 0x10, (-931 << 5) | 0x0f, (912 << 5) | 0x04, (807 << 5) | 0x11,
+	    (-931 << 5) | 0x0f
+};
+
+const int16_t coeff_2k_sb_3seg_0dqpsk[8] = {
+	(622 << 5) | 0x0c, (941 << 5) | 0x04, (796 << 5) | 0x10, (622 << 5) | 0x0c, (982 << 5) | 0x0c, (519 << 5) | 0x02, (572 << 5) | 0x0e,
+	    (982 << 5) | 0x0c
+};
+
+const int16_t coeff_2k_sb_3seg_1dqpsk[8] = {
+	(699 << 5) | 0x14, (607 << 5) | 0x04, (944 << 5) | 0x13, (699 << 5) | 0x14, (-720 << 5) | 0x0d, (640 << 5) | 0x03, (866 << 5) | 0x12,
+	    (-720 << 5) | 0x0d
+};
+
+const int16_t coeff_2k_sb_3seg[8] = {
+	(664 << 5) | 0x0c, (925 << 5) | 0x03, (937 << 5) | 0x10, (664 << 5) | 0x0c, (-610 << 5) | 0x0a, (697 << 5) | 0x01, (836 << 5) | 0x0e,
+	    (-610 << 5) | 0x0a
+};
+
+const int16_t coeff_4k_sb_1seg_dqpsk[8] = {
+	(-955 << 5) | 0x0e, (687 << 5) | 0x04, (818 << 5) | 0x10, (-955 << 5) | 0x0e, (-922 << 5) | 0x0d, (750 << 5) | 0x03, (665 << 5) | 0x0f,
+	    (-922 << 5) | 0x0d
+};
+
+const int16_t coeff_4k_sb_1seg[8] = {
+	(638 << 5) | 0x0d, (683 << 5) | 0x02, (638 << 5) | 0x0d, (638 << 5) | 0x0d, (-655 << 5) | 0x0a, (517 << 5) | 0x00, (698 << 5) | 0x0d,
+	    (-655 << 5) | 0x0a
+};
+
+const int16_t coeff_4k_sb_3seg_0dqpsk_1dqpsk[8] = {
+	(-707 << 5) | 0x14, (910 << 5) | 0x06, (889 << 5) | 0x16, (-707 << 5) | 0x14, (-958 << 5) | 0x13, (993 << 5) | 0x05, (523 << 5) | 0x14,
+	    (-958 << 5) | 0x13
+};
+
+const int16_t coeff_4k_sb_3seg_0dqpsk[8] = {
+	(-723 << 5) | 0x13, (910 << 5) | 0x05, (777 << 5) | 0x14, (-723 << 5) | 0x13, (-568 << 5) | 0x0f, (547 << 5) | 0x03, (696 << 5) | 0x12,
+	    (-568 << 5) | 0x0f
+};
+
+const int16_t coeff_4k_sb_3seg_1dqpsk[8] = {
+	(-940 << 5) | 0x15, (607 << 5) | 0x05, (915 << 5) | 0x16, (-940 << 5) | 0x15, (-848 << 5) | 0x13, (683 << 5) | 0x04, (543 << 5) | 0x14,
+	    (-848 << 5) | 0x13
+};
+
+const int16_t coeff_4k_sb_3seg[8] = {
+	(612 << 5) | 0x12, (910 << 5) | 0x04, (864 << 5) | 0x14, (612 << 5) | 0x12, (-869 << 5) | 0x13, (683 << 5) | 0x02, (869 << 5) | 0x12,
+	    (-869 << 5) | 0x13
+};
+
+const int16_t coeff_8k_sb_1seg_dqpsk[8] = {
+	(-835 << 5) | 0x12, (684 << 5) | 0x05, (735 << 5) | 0x14, (-835 << 5) | 0x12, (-598 << 5) | 0x10, (781 << 5) | 0x04, (739 << 5) | 0x13,
+	    (-598 << 5) | 0x10
+};
+
+const int16_t coeff_8k_sb_1seg[8] = {
+	(673 << 5) | 0x0f, (683 << 5) | 0x03, (808 << 5) | 0x12, (673 << 5) | 0x0f, (585 << 5) | 0x0f, (512 << 5) | 0x01, (780 << 5) | 0x0f,
+	    (585 << 5) | 0x0f
+};
+
+const int16_t coeff_8k_sb_3seg_0dqpsk_1dqpsk[8] = {
+	(863 << 5) | 0x17, (930 << 5) | 0x07, (878 << 5) | 0x19, (863 << 5) | 0x17, (0 << 5) | 0x14, (521 << 5) | 0x05, (980 << 5) | 0x18,
+	    (0 << 5) | 0x14
+};
+
+const int16_t coeff_8k_sb_3seg_0dqpsk[8] = {
+	(-924 << 5) | 0x17, (910 << 5) | 0x06, (774 << 5) | 0x17, (-924 << 5) | 0x17, (-877 << 5) | 0x15, (565 << 5) | 0x04, (553 << 5) | 0x15,
+	    (-877 << 5) | 0x15
+};
+
+const int16_t coeff_8k_sb_3seg_1dqpsk[8] = {
+	(-921 << 5) | 0x19, (607 << 5) | 0x06, (881 << 5) | 0x19, (-921 << 5) | 0x19, (-921 << 5) | 0x14, (713 << 5) | 0x05, (1018 << 5) | 0x18,
+	    (-921 << 5) | 0x14
+};
+
+const int16_t coeff_8k_sb_3seg[8] = {
+	(514 << 5) | 0x14, (910 << 5) | 0x05, (861 << 5) | 0x17, (514 << 5) | 0x14, (690 << 5) | 0x14, (683 << 5) | 0x03, (662 << 5) | 0x15,
+	    (690 << 5) | 0x14
+};
+
+const int16_t ana_fe_coeff_3seg[24] = {
+	81, 80, 78, 74, 68, 61, 54, 45, 37, 28, 19, 11, 4, 1022, 1017, 1013, 1010, 1008, 1008, 1008, 1008, 1010, 1014, 1017
+};
+
+const int16_t ana_fe_coeff_1seg[24] = {
+	249, 226, 164, 82, 5, 981, 970, 988, 1018, 20, 31, 26, 8, 1012, 1000, 1018, 1012, 8, 15, 14, 9, 3, 1017, 1003
+};
+
+const int16_t ana_fe_coeff_13seg[24] = {
+	396, 305, 105, -51, -77, -12, 41, 31, -11, -30, -11, 14, 15, -2, -13, -7, 5, 8, 1, -6, -7, -3, 0, 1
+};
+
+static u16 fft_to_mode(struct dib8000_state *state)
+{
+	u16 mode;
+	switch (state->fe.dtv_property_cache.transmission_mode) {
+	case TRANSMISSION_MODE_2K:
+		mode = 1;
+		break;
+	case TRANSMISSION_MODE_4K:
+		mode = 2;
+		break;
+	default:
+	case TRANSMISSION_MODE_AUTO:
+	case TRANSMISSION_MODE_8K:
+		mode = 3;
+		break;
+	}
+	return mode;
+}
+
+static void dib8000_set_acquisition_mode(struct dib8000_state *state)
+{
+	u16 nud = dib8000_read_word(state, 298);
+	nud |= (1 << 3) | (1 << 0);
+	dprintk("acquisition mode activated");
+	dib8000_write_word(state, 298, nud);
+}
+
+static int dib8000_set_output_mode(struct dib8000_state *state, int mode)
+{
+	u16 outreg, fifo_threshold, smo_mode, sram = 0x0205;	/* by default SDRAM deintlv is enabled */
+
+	outreg = 0;
+	fifo_threshold = 1792;
+	smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1);
+
+	dprintk("-I-  Setting output mode for demod %p to %d", &state->fe, mode);
+
+	switch (mode) {
+	case OUTMODE_MPEG2_PAR_GATED_CLK:	// STBs with parallel gated clock
+		outreg = (1 << 10);	/* 0x0400 */
+		break;
+	case OUTMODE_MPEG2_PAR_CONT_CLK:	// STBs with parallel continues clock
+		outreg = (1 << 10) | (1 << 6);	/* 0x0440 */
+		break;
+	case OUTMODE_MPEG2_SERIAL:	// STBs with serial input
+		outreg = (1 << 10) | (2 << 6) | (0 << 1);	/* 0x0482 */
+		break;
+	case OUTMODE_DIVERSITY:
+		if (state->cfg.hostbus_diversity) {
+			outreg = (1 << 10) | (4 << 6);	/* 0x0500 */
+			sram &= 0xfdff;
+		} else
+			sram |= 0x0c00;
+		break;
+	case OUTMODE_MPEG2_FIFO:	// e.g. USB feeding
+		smo_mode |= (3 << 1);
+		fifo_threshold = 512;
+		outreg = (1 << 10) | (5 << 6);
+		break;
+	case OUTMODE_HIGH_Z:	// disable
+		outreg = 0;
+		break;
+
+	case OUTMODE_ANALOG_ADC:
+		outreg = (1 << 10) | (3 << 6);
+		dib8000_set_acquisition_mode(state);
+		break;
+
+	default:
+		dprintk("Unhandled output_mode passed to be set for demod %p", &state->fe);
+		return -EINVAL;
+	}
+
+	if (state->cfg.output_mpeg2_in_188_bytes)
+		smo_mode |= (1 << 5);
+
+	dib8000_write_word(state, 299, smo_mode);
+	dib8000_write_word(state, 300, fifo_threshold);	/* synchronous fread */
+	dib8000_write_word(state, 1286, outreg);
+	dib8000_write_word(state, 1291, sram);
+
+	return 0;
+}
+
+static int dib8000_set_diversity_in(struct dvb_frontend *fe, int onoff)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	u16 sync_wait = dib8000_read_word(state, 273) & 0xfff0;
+
+	if (!state->differential_constellation) {
+		dib8000_write_word(state, 272, 1 << 9);	//dvsy_off_lmod4 = 1
+		dib8000_write_word(state, 273, sync_wait | (1 << 2) | 2);	// sync_enable = 1; comb_mode = 2
+	} else {
+		dib8000_write_word(state, 272, 0);	//dvsy_off_lmod4 = 0
+		dib8000_write_word(state, 273, sync_wait);	// sync_enable = 0; comb_mode = 0
+	}
+	state->diversity_onoff = onoff;
+
+	switch (onoff) {
+	case 0:		/* only use the internal way - not the diversity input */
+		dib8000_write_word(state, 270, 1);
+		dib8000_write_word(state, 271, 0);
+		break;
+	case 1:		/* both ways */
+		dib8000_write_word(state, 270, 6);
+		dib8000_write_word(state, 271, 6);
+		break;
+	case 2:		/* only the diversity input */
+		dib8000_write_word(state, 270, 0);
+		dib8000_write_word(state, 271, 1);
+		break;
+	}
+	return 0;
+}
+
+static void dib8000_set_power_mode(struct dib8000_state *state, enum dib8000_power_mode mode)
+{
+	/* by default everything is going to be powered off */
+	u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0xffff,
+	    reg_900 = (dib8000_read_word(state, 900) & 0xfffc) | 0x3, reg_1280 = (dib8000_read_word(state, 1280) & 0x00ff) | 0xff00;
+
+	/* now, depending on the requested mode, we power on */
+	switch (mode) {
+		/* power up everything in the demod */
+	case DIB8000M_POWER_ALL:
+		reg_774 = 0x0000;
+		reg_775 = 0x0000;
+		reg_776 = 0x0000;
+		reg_900 &= 0xfffc;
+		reg_1280 &= 0x00ff;
+		break;
+	case DIB8000M_POWER_INTERFACE_ONLY:
+		reg_1280 &= 0x00ff;
+		break;
+	}
+
+	dprintk("powermode : 774 : %x ; 775 : %x; 776 : %x ; 900 : %x; 1280 : %x", reg_774, reg_775, reg_776, reg_900, reg_1280);
+	dib8000_write_word(state, 774, reg_774);
+	dib8000_write_word(state, 775, reg_775);
+	dib8000_write_word(state, 776, reg_776);
+	dib8000_write_word(state, 900, reg_900);
+	dib8000_write_word(state, 1280, reg_1280);
+}
+
+static int dib8000_set_adc_state(struct dib8000_state *state, enum dibx000_adc_states no)
+{
+	int ret = 0;
+	u16 reg_907 = dib8000_read_word(state, 907), reg_908 = dib8000_read_word(state, 908);
+
+	switch (no) {
+	case DIBX000_SLOW_ADC_ON:
+		reg_908 |= (1 << 1) | (1 << 0);
+		ret |= dib8000_write_word(state, 908, reg_908);
+		reg_908 &= ~(1 << 1);
+		break;
+
+	case DIBX000_SLOW_ADC_OFF:
+		reg_908 |= (1 << 1) | (1 << 0);
+		break;
+
+	case DIBX000_ADC_ON:
+		reg_907 &= 0x0fff;
+		reg_908 &= 0x0003;
+		break;
+
+	case DIBX000_ADC_OFF:	// leave the VBG voltage on
+		reg_907 |= (1 << 14) | (1 << 13) | (1 << 12);
+		reg_908 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
+		break;
+
+	case DIBX000_VBG_ENABLE:
+		reg_907 &= ~(1 << 15);
+		break;
+
+	case DIBX000_VBG_DISABLE:
+		reg_907 |= (1 << 15);
+		break;
+
+	default:
+		break;
+	}
+
+	ret |= dib8000_write_word(state, 907, reg_907);
+	ret |= dib8000_write_word(state, 908, reg_908);
+
+	return ret;
+}
+
+static int dib8000_set_bandwidth(struct dib8000_state *state, u32 bw)
+{
+	u32 timf;
+
+	if (bw == 0)
+		bw = 6000;
+
+	if (state->timf == 0) {
+		dprintk("using default timf");
+		timf = state->timf_default;
+	} else {
+		dprintk("using updated timf");
+		timf = state->timf;
+	}
+
+	dib8000_write_word(state, 29, (u16) ((timf >> 16) & 0xffff));
+	dib8000_write_word(state, 30, (u16) ((timf) & 0xffff));
+
+	return 0;
+}
+
+static int dib8000_sad_calib(struct dib8000_state *state)
+{
+/* internal */
+	dib8000_write_word(state, 923, (0 << 1) | (0 << 0));
+	dib8000_write_word(state, 924, 776);	// 0.625*3.3 / 4096
+
+	/* do the calibration */
+	dib8000_write_word(state, 923, (1 << 0));
+	dib8000_write_word(state, 923, (0 << 0));
+
+	msleep(1);
+	return 0;
+}
+
+int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	if (value > 4095)
+		value = 4095;
+	state->wbd_ref = value;
+	return dib8000_write_word(state, 106, value);
+}
+
+EXPORT_SYMBOL(dib8000_set_wbd_ref);
+static void dib8000_reset_pll_common(struct dib8000_state *state, const struct dibx000_bandwidth_config *bw)
+{
+	dprintk("ifreq: %d %x, inversion: %d", bw->ifreq, bw->ifreq, bw->ifreq >> 25);
+	dib8000_write_word(state, 23, (u16) (((bw->internal * 1000) >> 16) & 0xffff));	/* P_sec_len */
+	dib8000_write_word(state, 24, (u16) ((bw->internal * 1000) & 0xffff));
+	dib8000_write_word(state, 27, (u16) ((bw->ifreq >> 16) & 0x01ff));
+	dib8000_write_word(state, 28, (u16) (bw->ifreq & 0xffff));
+	dib8000_write_word(state, 26, (u16) ((bw->ifreq >> 25) & 0x0003));
+
+	dib8000_write_word(state, 922, bw->sad_cfg);
+}
+
+static void dib8000_reset_pll(struct dib8000_state *state)
+{
+	const struct dibx000_bandwidth_config *pll = state->cfg.pll;
+	u16 clk_cfg1;
+
+	// clk_cfg0
+	dib8000_write_word(state, 901, (pll->pll_prediv << 8) | (pll->pll_ratio << 0));
+
+	// clk_cfg1
+	clk_cfg1 = (1 << 10) | (0 << 9) | (pll->IO_CLK_en_core << 8) |
+	    (pll->bypclk_div << 5) | (pll->enable_refdiv << 4) | (1 << 3) | (pll->pll_range << 1) | (pll->pll_reset << 0);
+
+	dib8000_write_word(state, 902, clk_cfg1);
+	clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3);
+	dib8000_write_word(state, 902, clk_cfg1);
+
+	dprintk("clk_cfg1: 0x%04x", clk_cfg1);	/* 0x507 1 0 1 000 0 0 11 1 */
+
+	/* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */
+	if (state->cfg.pll->ADClkSrc == 0)
+		dib8000_write_word(state, 904, (0 << 15) | (0 << 12) | (0 << 10) | (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1));
+	else if (state->cfg.refclksel != 0)
+		dib8000_write_word(state, 904,
+				   (0 << 15) | (1 << 12) | ((state->cfg.refclksel & 0x3) << 10) | (pll->modulo << 8) | (pll->
+															ADClkSrc << 7) | (0 << 1));
+	else
+		dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | (3 << 10) | (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1));
+
+	dib8000_reset_pll_common(state, pll);
+}
+
+static int dib8000_reset_gpio(struct dib8000_state *st)
+{
+	/* reset the GPIOs */
+	dib8000_write_word(st, 1029, st->cfg.gpio_dir);
+	dib8000_write_word(st, 1030, st->cfg.gpio_val);
+
+	/* TODO 782 is P_gpio_od */
+
+	dib8000_write_word(st, 1032, st->cfg.gpio_pwm_pos);
+
+	dib8000_write_word(st, 1037, st->cfg.pwm_freq_div);
+	return 0;
+}
+
+static int dib8000_cfg_gpio(struct dib8000_state *st, u8 num, u8 dir, u8 val)
+{
+	st->cfg.gpio_dir = dib8000_read_word(st, 1029);
+	st->cfg.gpio_dir &= ~(1 << num);	/* reset the direction bit */
+	st->cfg.gpio_dir |= (dir & 0x1) << num;	/* set the new direction */
+	dib8000_write_word(st, 1029, st->cfg.gpio_dir);
+
+	st->cfg.gpio_val = dib8000_read_word(st, 1030);
+	st->cfg.gpio_val &= ~(1 << num);	/* reset the direction bit */
+	st->cfg.gpio_val |= (val & 0x01) << num;	/* set the new value */
+	dib8000_write_word(st, 1030, st->cfg.gpio_val);
+
+	dprintk("gpio dir: %x: gpio val: %x", st->cfg.gpio_dir, st->cfg.gpio_val);
+
+	return 0;
+}
+
+int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	return dib8000_cfg_gpio(state, num, dir, val);
+}
+
+EXPORT_SYMBOL(dib8000_set_gpio);
+static const u16 dib8000_defaults[] = {
+	/* auto search configuration - lock0 by default waiting
+	 * for cpil_lock; lock1 cpil_lock; lock2 tmcc_sync_lock */
+	3, 7,
+	0x0004,
+	0x0400,
+	0x0814,
+
+	12, 11,
+	0x001b,
+	0x7740,
+	0x005b,
+	0x8d80,
+	0x01c9,
+	0xc380,
+	0x0000,
+	0x0080,
+	0x0000,
+	0x0090,
+	0x0001,
+	0xd4c0,
+
+	/*1, 32,
+	   0x6680 // P_corm_thres Lock algorithms configuration */
+
+	11, 80,			/* set ADC level to -16 */
+	(1 << 13) - 825 - 117,
+	(1 << 13) - 837 - 117,
+	(1 << 13) - 811 - 117,
+	(1 << 13) - 766 - 117,
+	(1 << 13) - 737 - 117,
+	(1 << 13) - 693 - 117,
+	(1 << 13) - 648 - 117,
+	(1 << 13) - 619 - 117,
+	(1 << 13) - 575 - 117,
+	(1 << 13) - 531 - 117,
+	(1 << 13) - 501 - 117,
+
+	4, 108,
+	0,
+	0,
+	0,
+	0,
+
+	1, 175,
+	0x0410,
+	1, 179,
+	8192,			// P_fft_nb_to_cut
+
+	6, 181,
+	0x2800,			// P_coff_corthres_ ( 2k 4k 8k ) 0x2800
+	0x2800,
+	0x2800,
+	0x2800,			// P_coff_cpilthres_ ( 2k 4k 8k ) 0x2800
+	0x2800,
+	0x2800,
+
+	2, 193,
+	0x0666,			// P_pha3_thres
+	0x0000,			// P_cti_use_cpe, P_cti_use_prog
+
+	2, 205,
+	0x200f,			// P_cspu_regul, P_cspu_win_cut
+	0x000f,			// P_des_shift_work
+
+	5, 215,
+	0x023d,			// P_adp_regul_cnt
+	0x00a4,			// P_adp_noise_cnt
+	0x00a4,			// P_adp_regul_ext
+	0x7ff0,			// P_adp_noise_ext
+	0x3ccc,			// P_adp_fil
+
+	1, 230,
+	0x0000,			// P_2d_byp_ti_num
+
+	1, 263,
+	0x800,			//P_equal_thres_wgn
+
+	1, 268,
+	(2 << 9) | 39,		// P_equal_ctrl_synchro, P_equal_speedmode
+
+	1, 270,
+	0x0001,			// P_div_lock0_wait
+	1, 285,
+	0x0020,			//p_fec_
+	1, 299,
+	0x0062,			// P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
+
+	1, 338,
+	(1 << 12) |		// P_ctrl_corm_thres4pre_freq_inh=1
+	    (1 << 10) |		// P_ctrl_pre_freq_mode_sat=1
+	    (0 << 9) |		// P_ctrl_pre_freq_inh=0
+	    (3 << 5) |		// P_ctrl_pre_freq_step=3
+	    (1 << 0),		// P_pre_freq_win_len=1
+
+	1, 903,
+	(0 << 4) | 2,		// P_divclksel=0 P_divbitsel=2 (was clk=3,bit=1 for MPW)
+
+	0,
+};
+
+static u16 dib8000_identify(struct i2c_device *client)
+{
+	u16 value;
+
+	//because of glitches sometimes
+	value = dib8000_i2c_read16(client, 896);
+
+	if ((value = dib8000_i2c_read16(client, 896)) != 0x01b3) {
+		dprintk("wrong Vendor ID (read=0x%x)", value);
+		return 0;
+	}
+
+	value = dib8000_i2c_read16(client, 897);
+	if (value != 0x8000 && value != 0x8001 && value != 0x8002) {
+		dprintk("wrong Device ID (%x)", value);
+		return 0;
+	}
+
+	switch (value) {
+	case 0x8000:
+		dprintk("found DiB8000A");
+		break;
+	case 0x8001:
+		dprintk("found DiB8000B");
+		break;
+	case 0x8002:
+		dprintk("found DiB8000C");
+		break;
+	}
+	return value;
+}
+
+static int dib8000_reset(struct dvb_frontend *fe)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+
+	dib8000_write_word(state, 1287, 0x0003);	/* sram lead in, rdy */
+
+	if ((state->revision = dib8000_identify(&state->i2c)) == 0)
+		return -EINVAL;
+
+	if (state->revision == 0x8000)
+		dprintk("error : dib8000 MA not supported");
+
+	dibx000_reset_i2c_master(&state->i2c_master);
+
+	dib8000_set_power_mode(state, DIB8000M_POWER_ALL);
+
+	/* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */
+	dib8000_set_adc_state(state, DIBX000_VBG_ENABLE);
+
+	/* restart all parts */
+	dib8000_write_word(state, 770, 0xffff);
+	dib8000_write_word(state, 771, 0xffff);
+	dib8000_write_word(state, 772, 0xfffc);
+	dib8000_write_word(state, 898, 0x000c);	// sad
+	dib8000_write_word(state, 1280, 0x004d);
+	dib8000_write_word(state, 1281, 0x000c);
+
+	dib8000_write_word(state, 770, 0x0000);
+	dib8000_write_word(state, 771, 0x0000);
+	dib8000_write_word(state, 772, 0x0000);
+	dib8000_write_word(state, 898, 0x0004);	// sad
+	dib8000_write_word(state, 1280, 0x0000);
+	dib8000_write_word(state, 1281, 0x0000);
+
+	/* drives */
+	if (state->cfg.drives)
+		dib8000_write_word(state, 906, state->cfg.drives);
+	else {
+		dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal.");
+		dib8000_write_word(state, 906, 0x2d98);	// min drive SDRAM - not optimal - adjust
+	}
+
+	dib8000_reset_pll(state);
+
+	if (dib8000_reset_gpio(state) != 0)
+		dprintk("GPIO reset was not successful.");
+
+	if (dib8000_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
+		dprintk("OUTPUT_MODE could not be resetted.");
+
+	state->current_agc = NULL;
+
+	// P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
+	/* P_iqc_ca2 = 0; P_iqc_impnc_on = 0; P_iqc_mode = 0; */
+	if (state->cfg.pll->ifreq == 0)
+		dib8000_write_word(state, 40, 0x0755);	/* P_iqc_corr_inh = 0 enable IQcorr block */
+	else
+		dib8000_write_word(state, 40, 0x1f55);	/* P_iqc_corr_inh = 1 disable IQcorr block */
+
+	{
+		u16 l = 0, r;
+		const u16 *n;
+		n = dib8000_defaults;
+		l = *n++;
+		while (l) {
+			r = *n++;
+			do {
+				dib8000_write_word(state, r, *n++);
+				r++;
+			} while (--l);
+			l = *n++;
+		}
+	}
+	state->isdbt_cfg_loaded = 0;
+
+	//div_cfg override for special configs
+	if (state->cfg.div_cfg != 0)
+		dib8000_write_word(state, 903, state->cfg.div_cfg);
+
+	/* unforce divstr regardless whether i2c enumeration was done or not */
+	dib8000_write_word(state, 1285, dib8000_read_word(state, 1285) & ~(1 << 1));
+
+	dib8000_set_bandwidth(state, 6000);
+
+	dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON);
+	dib8000_sad_calib(state);
+	dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
+
+	dib8000_set_power_mode(state, DIB8000M_POWER_INTERFACE_ONLY);
+
+	return 0;
+}
+
+static void dib8000_restart_agc(struct dib8000_state *state)
+{
+	// P_restart_iqc & P_restart_agc
+	dib8000_write_word(state, 770, 0x0a00);
+	dib8000_write_word(state, 770, 0x0000);
+}
+
+static int dib8000_update_lna(struct dib8000_state *state)
+{
+	u16 dyn_gain;
+
+	if (state->cfg.update_lna) {
+		// read dyn_gain here (because it is demod-dependent and not tuner)
+		dyn_gain = dib8000_read_word(state, 390);
+
+		if (state->cfg.update_lna(&state->fe, dyn_gain)) {	// LNA has changed
+			dib8000_restart_agc(state);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static int dib8000_set_agc_config(struct dib8000_state *state, u8 band)
+{
+	struct dibx000_agc_config *agc = NULL;
+	int i;
+	if (state->current_band == band && state->current_agc != NULL)
+		return 0;
+	state->current_band = band;
+
+	for (i = 0; i < state->cfg.agc_config_count; i++)
+		if (state->cfg.agc[i].band_caps & band) {
+			agc = &state->cfg.agc[i];
+			break;
+		}
+
+	if (agc == NULL) {
+		dprintk("no valid AGC configuration found for band 0x%02x", band);
+		return -EINVAL;
+	}
+
+	state->current_agc = agc;
+
+	/* AGC */
+	dib8000_write_word(state, 76, agc->setup);
+	dib8000_write_word(state, 77, agc->inv_gain);
+	dib8000_write_word(state, 78, agc->time_stabiliz);
+	dib8000_write_word(state, 101, (agc->alpha_level << 12) | agc->thlock);
+
+	// Demod AGC loop configuration
+	dib8000_write_word(state, 102, (agc->alpha_mant << 5) | agc->alpha_exp);
+	dib8000_write_word(state, 103, (agc->beta_mant << 6) | agc->beta_exp);
+
+	dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d",
+		state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
+
+	/* AGC continued */
+	if (state->wbd_ref != 0)
+		dib8000_write_word(state, 106, state->wbd_ref);
+	else			// use default
+		dib8000_write_word(state, 106, agc->wbd_ref);
+	dib8000_write_word(state, 107, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8));
+	dib8000_write_word(state, 108, agc->agc1_max);
+	dib8000_write_word(state, 109, agc->agc1_min);
+	dib8000_write_word(state, 110, agc->agc2_max);
+	dib8000_write_word(state, 111, agc->agc2_min);
+	dib8000_write_word(state, 112, (agc->agc1_pt1 << 8) | agc->agc1_pt2);
+	dib8000_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
+	dib8000_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
+	dib8000_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
+
+	dib8000_write_word(state, 75, agc->agc1_pt3);
+	dib8000_write_word(state, 923, (dib8000_read_word(state, 923) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2));	/*LB : 929 -> 923 */
+
+	return 0;
+}
+
+static int dib8000_agc_soft_split(struct dib8000_state *state)
+{
+	u16 agc, split_offset;
+
+	if (!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0)
+		return FE_CALLBACK_TIME_NEVER;
+
+	// n_agc_global
+	agc = dib8000_read_word(state, 390);
+
+	if (agc > state->current_agc->split.min_thres)
+		split_offset = state->current_agc->split.min;
+	else if (agc < state->current_agc->split.max_thres)
+		split_offset = state->current_agc->split.max;
+	else
+		split_offset = state->current_agc->split.max *
+		    (agc - state->current_agc->split.min_thres) / (state->current_agc->split.max_thres - state->current_agc->split.min_thres);
+
+	dprintk("AGC split_offset: %d", split_offset);
+
+	// P_agc_force_split and P_agc_split_offset
+	dib8000_write_word(state, 107, (dib8000_read_word(state, 107) & 0xff00) | split_offset);
+	return 5000;
+}
+
+static int dib8000_agc_startup(struct dvb_frontend *fe)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	enum frontend_tune_state *tune_state = &state->tune_state;
+
+	int ret = 0;
+
+	switch (*tune_state) {
+	case CT_AGC_START:
+		// set power-up level: interf+analog+AGC
+
+		dib8000_set_adc_state(state, DIBX000_ADC_ON);
+
+		if (dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))) != 0) {
+			*tune_state = CT_AGC_STOP;
+			state->status = FE_STATUS_TUNE_FAILED;
+			break;
+		}
+
+		ret = 70;
+		*tune_state = CT_AGC_STEP_0;
+		break;
+
+	case CT_AGC_STEP_0:
+		//AGC initialization
+		if (state->cfg.agc_control)
+			state->cfg.agc_control(&state->fe, 1);
+
+		dib8000_restart_agc(state);
+
+		// wait AGC rough lock time
+		ret = 50;
+		*tune_state = CT_AGC_STEP_1;
+		break;
+
+	case CT_AGC_STEP_1:
+		// wait AGC accurate lock time
+		ret = 70;
+
+		if (dib8000_update_lna(state))
+			// wait only AGC rough lock time
+			ret = 50;
+		else
+			*tune_state = CT_AGC_STEP_2;
+		break;
+
+	case CT_AGC_STEP_2:
+		dib8000_agc_soft_split(state);
+
+		if (state->cfg.agc_control)
+			state->cfg.agc_control(&state->fe, 0);
+
+		*tune_state = CT_AGC_STOP;
+		break;
+	default:
+		ret = dib8000_agc_soft_split(state);
+		break;
+	}
+	return ret;
+
+}
+
+static void dib8000_update_timf(struct dib8000_state *state)
+{
+	u32 timf = state->timf = dib8000_read32(state, 435);
+
+	dib8000_write_word(state, 29, (u16) (timf >> 16));
+	dib8000_write_word(state, 30, (u16) (timf & 0xffff));
+	dprintk("Updated timing frequency: %d (default: %d)", state->timf, state->timf_default);
+}
+
+static void dib8000_set_channel(struct dib8000_state *state, u8 seq, u8 autosearching)
+{
+	u16 mode, max_constellation, seg_diff_mask = 0, nbseg_diff = 0;
+	u8 guard, crate, constellation, timeI;
+	u8 permu_seg[] = { 6, 5, 7, 4, 8, 3, 9, 2, 10, 1, 11, 0, 12 };
+	u16 i, coeff[4], P_cfr_left_edge = 0, P_cfr_right_edge = 0, seg_mask13 = 0x1fff;	// All 13 segments enabled
+	const s16 *ncoeff, *ana_fe;
+	u16 tmcc_pow = 0;
+	u16 coff_pow = 0x2800;
+	u16 init_prbs = 0xfff;
+	u16 ana_gain = 0;
+	u16 adc_target_16dB[11] = {
+		(1 << 13) - 825 - 117,
+		(1 << 13) - 837 - 117,
+		(1 << 13) - 811 - 117,
+		(1 << 13) - 766 - 117,
+		(1 << 13) - 737 - 117,
+		(1 << 13) - 693 - 117,
+		(1 << 13) - 648 - 117,
+		(1 << 13) - 619 - 117,
+		(1 << 13) - 575 - 117,
+		(1 << 13) - 531 - 117,
+		(1 << 13) - 501 - 117
+	};
+
+	if (state->ber_monitored_layer != LAYER_ALL)
+		dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & 0x60) | state->ber_monitored_layer);
+	else
+		dib8000_write_word(state, 285, dib8000_read_word(state, 285) & 0x60);
+
+	i = dib8000_read_word(state, 26) & 1;	// P_dds_invspec
+	dib8000_write_word(state, 26, state->fe.dtv_property_cache.inversion ^ i);
+
+	if (state->fe.dtv_property_cache.isdbt_sb_mode) {
+		//compute new dds_freq for the seg and adjust prbs
+		int seg_offset =
+		    state->fe.dtv_property_cache.isdbt_sb_segment_idx - (state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) -
+		    (state->fe.dtv_property_cache.isdbt_sb_segment_count % 2);
+		int clk = state->cfg.pll->internal;
+		u32 segtodds = ((u32) (430 << 23) / clk) << 3;	// segtodds = SegBW / Fclk * pow(2,26)
+		int dds_offset = seg_offset * segtodds;
+		int new_dds, sub_channel;
+		if ((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0)	// if even
+			dds_offset -= (int)(segtodds / 2);
+
+		if (state->cfg.pll->ifreq == 0) {
+			if ((state->fe.dtv_property_cache.inversion ^ i) == 0) {
+				dib8000_write_word(state, 26, dib8000_read_word(state, 26) | 1);
+				new_dds = dds_offset;
+			} else
+				new_dds = dds_offset;
+
+			// We shift tuning frequency if the wanted segment is :
+			//  - the segment of center frequency with an odd total number of segments
+			//  - the segment to the left of center frequency with an even total number of segments
+			//  - the segment to the right of center frequency with an even total number of segments
+			if ((state->fe.dtv_property_cache.delivery_system == SYS_ISDBT) && (state->fe.dtv_property_cache.isdbt_sb_mode == 1)
+			    &&
+			    (((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2)
+			      && (state->fe.dtv_property_cache.isdbt_sb_segment_idx ==
+				  ((state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))
+			     || (((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
+				 && (state->fe.dtv_property_cache.isdbt_sb_segment_idx == (state->fe.dtv_property_cache.isdbt_sb_segment_count / 2)))
+			     || (((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
+				 && (state->fe.dtv_property_cache.isdbt_sb_segment_idx ==
+				     ((state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))
+			    )) {
+				new_dds -= ((u32) (850 << 22) / clk) << 4;	// new_dds = 850 (freq shift in KHz) / Fclk * pow(2,26)
+			}
+		} else {
+			if ((state->fe.dtv_property_cache.inversion ^ i) == 0)
+				new_dds = state->cfg.pll->ifreq - dds_offset;
+			else
+				new_dds = state->cfg.pll->ifreq + dds_offset;
+		}
+		dib8000_write_word(state, 27, (u16) ((new_dds >> 16) & 0x01ff));
+		dib8000_write_word(state, 28, (u16) (new_dds & 0xffff));
+		if (state->fe.dtv_property_cache.isdbt_sb_segment_count % 2)	// if odd
+			sub_channel = ((state->fe.dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset) + 1) % 41) / 3;
+		else		// if even
+			sub_channel = ((state->fe.dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset)) % 41) / 3;
+		sub_channel -= 6;
+
+		if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K
+		    || state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_4K) {
+			dib8000_write_word(state, 219, dib8000_read_word(state, 219) | 0x1);	//adp_pass =1
+			dib8000_write_word(state, 190, dib8000_read_word(state, 190) | (0x1 << 14));	//pha3_force_pha_shift = 1
+		} else {
+			dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe);	//adp_pass =0
+			dib8000_write_word(state, 190, dib8000_read_word(state, 190) & 0xbfff);	//pha3_force_pha_shift = 0
+		}
+
+		switch (state->fe.dtv_property_cache.transmission_mode) {
+		case TRANSMISSION_MODE_2K:
+			switch (sub_channel) {
+			case -6:
+				init_prbs = 0x0;
+				break;	// 41, 0, 1
+			case -5:
+				init_prbs = 0x423;
+				break;	// 02~04
+			case -4:
+				init_prbs = 0x9;
+				break;	// 05~07
+			case -3:
+				init_prbs = 0x5C7;
+				break;	// 08~10
+			case -2:
+				init_prbs = 0x7A6;
+				break;	// 11~13
+			case -1:
+				init_prbs = 0x3D8;
+				break;	// 14~16
+			case 0:
+				init_prbs = 0x527;
+				break;	// 17~19
+			case 1:
+				init_prbs = 0x7FF;
+				break;	// 20~22
+			case 2:
+				init_prbs = 0x79B;
+				break;	// 23~25
+			case 3:
+				init_prbs = 0x3D6;
+				break;	// 26~28
+			case 4:
+				init_prbs = 0x3A2;
+				break;	// 29~31
+			case 5:
+				init_prbs = 0x53B;
+				break;	// 32~34
+			case 6:
+				init_prbs = 0x2F4;
+				break;	// 35~37
+			default:
+			case 7:
+				init_prbs = 0x213;
+				break;	// 38~40
+			}
+			break;
+
+		case TRANSMISSION_MODE_4K:
+			switch (sub_channel) {
+			case -6:
+				init_prbs = 0x0;
+				break;	// 41, 0, 1
+			case -5:
+				init_prbs = 0x208;
+				break;	// 02~04
+			case -4:
+				init_prbs = 0xC3;
+				break;	// 05~07
+			case -3:
+				init_prbs = 0x7B9;
+				break;	// 08~10
+			case -2:
+				init_prbs = 0x423;
+				break;	// 11~13
+			case -1:
+				init_prbs = 0x5C7;
+				break;	// 14~16
+			case 0:
+				init_prbs = 0x3D8;
+				break;	// 17~19
+			case 1:
+				init_prbs = 0x7FF;
+				break;	// 20~22
+			case 2:
+				init_prbs = 0x3D6;
+				break;	// 23~25
+			case 3:
+				init_prbs = 0x53B;
+				break;	// 26~28
+			case 4:
+				init_prbs = 0x213;
+				break;	// 29~31
+			case 5:
+				init_prbs = 0x29;
+				break;	// 32~34
+			case 6:
+				init_prbs = 0xD0;
+				break;	// 35~37
+			default:
+			case 7:
+				init_prbs = 0x48E;
+				break;	// 38~40
+			}
+			break;
+
+		default:
+		case TRANSMISSION_MODE_8K:
+			switch (sub_channel) {
+			case -6:
+				init_prbs = 0x0;
+				break;	// 41, 0, 1
+			case -5:
+				init_prbs = 0x740;
+				break;	// 02~04
+			case -4:
+				init_prbs = 0x069;
+				break;	// 05~07
+			case -3:
+				init_prbs = 0x7DD;
+				break;	// 08~10
+			case -2:
+				init_prbs = 0x208;
+				break;	// 11~13
+			case -1:
+				init_prbs = 0x7B9;
+				break;	// 14~16
+			case 0:
+				init_prbs = 0x5C7;
+				break;	// 17~19
+			case 1:
+				init_prbs = 0x7FF;
+				break;	// 20~22
+			case 2:
+				init_prbs = 0x53B;
+				break;	// 23~25
+			case 3:
+				init_prbs = 0x29;
+				break;	// 26~28
+			case 4:
+				init_prbs = 0x48E;
+				break;	// 29~31
+			case 5:
+				init_prbs = 0x4C4;
+				break;	// 32~34
+			case 6:
+				init_prbs = 0x367;
+				break;	// 33~37
+			default:
+			case 7:
+				init_prbs = 0x684;
+				break;	// 38~40
+			}
+			break;
+		}
+	} else {		// if not state->fe.dtv_property_cache.isdbt_sb_mode
+		dib8000_write_word(state, 27, (u16) ((state->cfg.pll->ifreq >> 16) & 0x01ff));
+		dib8000_write_word(state, 28, (u16) (state->cfg.pll->ifreq & 0xffff));
+		dib8000_write_word(state, 26, (u16) ((state->cfg.pll->ifreq >> 25) & 0x0003));
+	}
+	/*P_mode == ?? */
+	dib8000_write_word(state, 10, (seq << 4));
+	//  dib8000_write_word(state, 287, (dib8000_read_word(state, 287) & 0xe000) | 0x1000);
+
+	switch (state->fe.dtv_property_cache.guard_interval) {
+	case GUARD_INTERVAL_1_32:
+		guard = 0;
+		break;
+	case GUARD_INTERVAL_1_16:
+		guard = 1;
+		break;
+	case GUARD_INTERVAL_1_8:
+		guard = 2;
+		break;
+	case GUARD_INTERVAL_1_4:
+	default:
+		guard = 3;
+		break;
+	}
+
+	dib8000_write_word(state, 1, (init_prbs << 2) | (guard & 0x3));	// ADDR 1
+
+	max_constellation = DQPSK;
+	for (i = 0; i < 3; i++) {
+		switch (state->fe.dtv_property_cache.layer[i].modulation) {
+		case DQPSK:
+			constellation = 0;
+			break;
+		case QPSK:
+			constellation = 1;
+			break;
+		case QAM_16:
+			constellation = 2;
+			break;
+		case QAM_64:
+		default:
+			constellation = 3;
+			break;
+		}
+
+		switch (state->fe.dtv_property_cache.layer[i].fec) {
+		case FEC_1_2:
+			crate = 1;
+			break;
+		case FEC_2_3:
+			crate = 2;
+			break;
+		case FEC_3_4:
+			crate = 3;
+			break;
+		case FEC_5_6:
+			crate = 5;
+			break;
+		case FEC_7_8:
+		default:
+			crate = 7;
+			break;
+		}
+
+		if ((state->fe.dtv_property_cache.layer[i].interleaving > 0) &&
+		    ((state->fe.dtv_property_cache.layer[i].interleaving <= 3) ||
+		     (state->fe.dtv_property_cache.layer[i].interleaving == 4 && state->fe.dtv_property_cache.isdbt_sb_mode == 1))
+		    )
+			timeI = state->fe.dtv_property_cache.layer[i].interleaving;
+		else
+			timeI = 0;
+		dib8000_write_word(state, 2 + i, (constellation << 10) | ((state->fe.dtv_property_cache.layer[i].segment_count & 0xf) << 6) |
+				   (crate << 3) | timeI);
+		if (state->fe.dtv_property_cache.layer[i].segment_count > 0) {
+			switch (max_constellation) {
+			case DQPSK:
+			case QPSK:
+				if (state->fe.dtv_property_cache.layer[i].modulation == QAM_16 ||
+				    state->fe.dtv_property_cache.layer[i].modulation == QAM_64)
+					max_constellation = state->fe.dtv_property_cache.layer[i].modulation;
+				break;
+			case QAM_16:
+				if (state->fe.dtv_property_cache.layer[i].modulation == QAM_64)
+					max_constellation = state->fe.dtv_property_cache.layer[i].modulation;
+				break;
+			}
+		}
+	}
+
+	mode = fft_to_mode(state);
+
+	//dib8000_write_word(state, 5, 13); /*p_last_seg = 13*/
+
+	dib8000_write_word(state, 274, (dib8000_read_word(state, 274) & 0xffcf) |
+			   ((state->fe.dtv_property_cache.isdbt_partial_reception & 1) << 5) | ((state->fe.dtv_property_cache.
+												 isdbt_sb_mode & 1) << 4));
+
+	dprintk("mode = %d ; guard = %d", mode, state->fe.dtv_property_cache.guard_interval);
+
+	/* signal optimization parameter */
+
+	if (state->fe.dtv_property_cache.isdbt_partial_reception) {
+		seg_diff_mask = (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) << permu_seg[0];
+		for (i = 1; i < 3; i++)
+			nbseg_diff +=
+			    (state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * state->fe.dtv_property_cache.layer[i].segment_count;
+		for (i = 0; i < nbseg_diff; i++)
+			seg_diff_mask |= 1 << permu_seg[i + 1];
+	} else {
+		for (i = 0; i < 3; i++)
+			nbseg_diff +=
+			    (state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * state->fe.dtv_property_cache.layer[i].segment_count;
+		for (i = 0; i < nbseg_diff; i++)
+			seg_diff_mask |= 1 << permu_seg[i];
+	}
+	dprintk("nbseg_diff = %X (%d)", seg_diff_mask, seg_diff_mask);
+
+	state->differential_constellation = (seg_diff_mask != 0);
+	dib8000_set_diversity_in(&state->fe, state->diversity_onoff);
+
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {	// ISDB-Tsb
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 1)	// 3-segments
+			seg_mask13 = 0x00E0;
+		else		// 1-segment
+			seg_mask13 = 0x0040;
+	} else
+		seg_mask13 = 0x1fff;
+
+	// WRITE: Mode & Diff mask
+	dib8000_write_word(state, 0, (mode << 13) | seg_diff_mask);
+
+	if ((seg_diff_mask) || (state->fe.dtv_property_cache.isdbt_sb_mode))
+		dib8000_write_word(state, 268, (dib8000_read_word(state, 268) & 0xF9FF) | 0x0200);
+	else
+		dib8000_write_word(state, 268, (2 << 9) | 39);	//init value
+
+	// ---- SMALL ----
+	// P_small_seg_diff
+	dib8000_write_word(state, 352, seg_diff_mask);	// ADDR 352
+
+	dib8000_write_word(state, 353, seg_mask13);	// ADDR 353
+
+/*     // P_small_narrow_band=0, P_small_last_seg=13, P_small_offset_num_car=5 */
+	// dib8000_write_word(state, 351, (state->fe.dtv_property_cache.isdbt_sb_mode << 8) | (13 << 4) | 5 );
+
+	// ---- SMALL ----
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
+		switch (state->fe.dtv_property_cache.transmission_mode) {
+		case TRANSMISSION_MODE_2K:
+			if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) {	// 1-seg
+				if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK)	// DQPSK
+					ncoeff = coeff_2k_sb_1seg_dqpsk;
+				else	// QPSK or QAM
+					ncoeff = coeff_2k_sb_1seg;
+			} else {	// 3-segments
+				if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) {	// DQPSK on central segment
+					if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK)	// DQPSK on external segments
+						ncoeff = coeff_2k_sb_3seg_0dqpsk_1dqpsk;
+					else	// QPSK or QAM on external segments
+						ncoeff = coeff_2k_sb_3seg_0dqpsk;
+				} else {	// QPSK or QAM on central segment
+					if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK)	// DQPSK on external segments
+						ncoeff = coeff_2k_sb_3seg_1dqpsk;
+					else	// QPSK or QAM on external segments
+						ncoeff = coeff_2k_sb_3seg;
+				}
+			}
+			break;
+
+		case TRANSMISSION_MODE_4K:
+			if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) {	// 1-seg
+				if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK)	// DQPSK
+					ncoeff = coeff_4k_sb_1seg_dqpsk;
+				else	// QPSK or QAM
+					ncoeff = coeff_4k_sb_1seg;
+			} else {	// 3-segments
+				if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) {	// DQPSK on central segment
+					if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) {	// DQPSK on external segments
+						ncoeff = coeff_4k_sb_3seg_0dqpsk_1dqpsk;
+					} else {	// QPSK or QAM on external segments
+						ncoeff = coeff_4k_sb_3seg_0dqpsk;
+					}
+				} else {	// QPSK or QAM on central segment
+					if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) {	// DQPSK on external segments
+						ncoeff = coeff_4k_sb_3seg_1dqpsk;
+					} else	// QPSK or QAM on external segments
+						ncoeff = coeff_4k_sb_3seg;
+				}
+			}
+			break;
+
+		case TRANSMISSION_MODE_AUTO:
+		case TRANSMISSION_MODE_8K:
+		default:
+			if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) {	// 1-seg
+				if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK)	// DQPSK
+					ncoeff = coeff_8k_sb_1seg_dqpsk;
+				else	// QPSK or QAM
+					ncoeff = coeff_8k_sb_1seg;
+			} else {	// 3-segments
+				if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) {	// DQPSK on central segment
+					if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) {	// DQPSK on external segments
+						ncoeff = coeff_8k_sb_3seg_0dqpsk_1dqpsk;
+					} else {	// QPSK or QAM on external segments
+						ncoeff = coeff_8k_sb_3seg_0dqpsk;
+					}
+				} else {	// QPSK or QAM on central segment
+					if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) {	// DQPSK on external segments
+						ncoeff = coeff_8k_sb_3seg_1dqpsk;
+					} else	// QPSK or QAM on external segments
+						ncoeff = coeff_8k_sb_3seg;
+				}
+			}
+			break;
+		}
+	}
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1)
+		for (i = 0; i < 8; i++)
+			dib8000_write_word(state, 343 + i, ncoeff[i]);
+
+	// P_small_coef_ext_enable=ISDB-Tsb, P_small_narrow_band=ISDB-Tsb, P_small_last_seg=13, P_small_offset_num_car=5
+	dib8000_write_word(state, 351,
+			   (state->fe.dtv_property_cache.isdbt_sb_mode << 9) | (state->fe.dtv_property_cache.isdbt_sb_mode << 8) | (13 << 4) | 5);
+
+	// ---- COFF ----
+	// Carloff, the most robust
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {	// Sound Broadcasting mode - use both TMCC and AC pilots
+
+		// P_coff_cpil_alpha=4, P_coff_inh=0, P_coff_cpil_winlen=64
+		// P_coff_narrow_band=1, P_coff_square_val=1, P_coff_one_seg=~partial_rcpt, P_coff_use_tmcc=1, P_coff_use_ac=1
+		dib8000_write_word(state, 187,
+				   (4 << 12) | (0 << 11) | (63 << 5) | (0x3 << 3) | ((~state->fe.dtv_property_cache.isdbt_partial_reception & 1) << 2)
+				   | 0x3);
+
+/*             // P_small_coef_ext_enable = 1 */
+/*             dib8000_write_word(state, 351, dib8000_read_word(state, 351) | 0x200); */
+
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) {	// Sound Broadcasting mode 1 seg
+
+			// P_coff_winlen=63, P_coff_thres_lock=15, P_coff_one_seg_width= (P_mode == 3) , P_coff_one_seg_sym= (P_mode-1)
+			if (mode == 3)
+				dib8000_write_word(state, 180, 0x1fcf | ((mode - 1) << 14));
+			else
+				dib8000_write_word(state, 180, 0x0fcf | ((mode - 1) << 14));
+			// P_ctrl_corm_thres4pre_freq_inh=1,P_ctrl_pre_freq_mode_sat=1,
+			// P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 5, P_pre_freq_win_len=4
+			dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (5 << 5) | 4);
+			// P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8
+			dib8000_write_word(state, 340, (16 << 6) | (8 << 0));
+			// P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1
+			dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
+
+			// P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k
+			dib8000_write_word(state, 181, 300);
+			dib8000_write_word(state, 182, 150);
+			dib8000_write_word(state, 183, 80);
+			dib8000_write_word(state, 184, 300);
+			dib8000_write_word(state, 185, 150);
+			dib8000_write_word(state, 186, 80);
+		} else {	// Sound Broadcasting mode 3 seg
+			// P_coff_one_seg_sym= 1, P_coff_one_seg_width= 1, P_coff_winlen=63, P_coff_thres_lock=15
+			/*                 if (mode == 3) */
+			/*                     dib8000_write_word(state, 180, 0x2fca | ((0) << 14)); */
+			/*                 else */
+			/*                     dib8000_write_word(state, 180, 0x2fca | ((1) << 14)); */
+			dib8000_write_word(state, 180, 0x1fcf | (1 << 14));
+
+			// P_ctrl_corm_thres4pre_freq_inh = 1, P_ctrl_pre_freq_mode_sat=1,
+			// P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 4, P_pre_freq_win_len=4
+			dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (4 << 5) | 4);
+			// P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8
+			dib8000_write_word(state, 340, (16 << 6) | (8 << 0));
+			//P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1
+			dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
+
+			// P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k
+			dib8000_write_word(state, 181, 350);
+			dib8000_write_word(state, 182, 300);
+			dib8000_write_word(state, 183, 250);
+			dib8000_write_word(state, 184, 350);
+			dib8000_write_word(state, 185, 300);
+			dib8000_write_word(state, 186, 250);
+		}
+
+	} else if (state->isdbt_cfg_loaded == 0) {	// if not Sound Broadcasting mode : put default values for 13 segments
+		dib8000_write_word(state, 180, (16 << 6) | 9);
+		dib8000_write_word(state, 187, (4 << 12) | (8 << 5) | 0x2);
+		coff_pow = 0x2800;
+		for (i = 0; i < 6; i++)
+			dib8000_write_word(state, 181 + i, coff_pow);
+
+		// P_ctrl_corm_thres4pre_freq_inh=1, P_ctrl_pre_freq_mode_sat=1,
+		// P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 3, P_pre_freq_win_len=1
+		dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (3 << 5) | 1);
+
+		// P_ctrl_pre_freq_win_len=8, P_ctrl_pre_freq_thres_lockin=6
+		dib8000_write_word(state, 340, (8 << 6) | (6 << 0));
+		// P_ctrl_pre_freq_thres_lockout=4, P_small_use_tmcc/ac/cp=1
+		dib8000_write_word(state, 341, (4 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
+	}
+	// ---- FFT ----
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1 && state->fe.dtv_property_cache.isdbt_partial_reception == 0)	// 1-seg
+		dib8000_write_word(state, 178, 64);	// P_fft_powrange=64
+	else
+		dib8000_write_word(state, 178, 32);	// P_fft_powrange=32
+
+	/* make the cpil_coff_lock more robust but slower p_coff_winlen
+	 * 6bits; p_coff_thres_lock 6bits (for coff lock if needed)
+	 */
+	/* if ( ( nbseg_diff>0)&&(nbseg_diff<13))
+	   dib8000_write_word(state, 187, (dib8000_read_word(state, 187) & 0xfffb) | (1 << 3)); */
+
+	dib8000_write_word(state, 189, ~seg_mask13 | seg_diff_mask);	/* P_lmod4_seg_inh       */
+	dib8000_write_word(state, 192, ~seg_mask13 | seg_diff_mask);	/* P_pha3_seg_inh        */
+	dib8000_write_word(state, 225, ~seg_mask13 | seg_diff_mask);	/* P_tac_seg_inh         */
+	if ((!state->fe.dtv_property_cache.isdbt_sb_mode) && (state->cfg.pll->ifreq == 0))
+		dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask | 0x40);	/* P_equal_noise_seg_inh */
+	else
+		dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask);	/* P_equal_noise_seg_inh */
+	dib8000_write_word(state, 287, ~seg_mask13 | 0x1000);	/* P_tmcc_seg_inh        */
+	//dib8000_write_word(state, 288, ~seg_mask13 | seg_diff_mask); /* P_tmcc_seg_eq_inh */
+	if (!autosearching)
+		dib8000_write_word(state, 288, (~seg_mask13 | seg_diff_mask) & 0x1fff);	/* P_tmcc_seg_eq_inh */
+	else
+		dib8000_write_word(state, 288, 0x1fff);	//disable equalisation of the tmcc when autosearch to be able to find the DQPSK channels.
+	dprintk("287 = %X (%d)", ~seg_mask13 | 0x1000, ~seg_mask13 | 0x1000);
+
+	dib8000_write_word(state, 211, seg_mask13 & (~seg_diff_mask));	/* P_des_seg_enabled     */
+
+	/* offset loop parameters */
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 0)	// Sound Broadcasting mode 1 seg
+			/* P_timf_alpha = (11-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */
+			dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x40);
+
+		else		// Sound Broadcasting mode 3 seg
+			/* P_timf_alpha = (10-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */
+			dib8000_write_word(state, 32, ((10 - mode) << 12) | (6 << 8) | 0x60);
+	} else
+		// TODO in 13 seg, timf_alpha can always be the same or not ?
+		/* P_timf_alpha = (9-P_mode, P_corm_alpha=6, P_corm_thres=0x80 */
+		dib8000_write_word(state, 32, ((9 - mode) << 12) | (6 << 8) | 0x80);
+
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 0)	// Sound Broadcasting mode 1 seg
+			/* P_ctrl_pha_off_max=3   P_ctrl_sfreq_inh =0  P_ctrl_sfreq_step = (11-P_mode)  */
+			dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (10 - mode));
+
+		else		// Sound Broadcasting mode 3 seg
+			/* P_ctrl_pha_off_max=3   P_ctrl_sfreq_inh =0  P_ctrl_sfreq_step = (10-P_mode)  */
+			dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (9 - mode));
+	} else
+		/* P_ctrl_pha_off_max=3   P_ctrl_sfreq_inh =0  P_ctrl_sfreq_step = 9  */
+		dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (8 - mode));
+
+	/* P_dvsy_sync_wait - reuse mode */
+	switch (state->fe.dtv_property_cache.transmission_mode) {
+	case TRANSMISSION_MODE_8K:
+		mode = 256;
+		break;
+	case TRANSMISSION_MODE_4K:
+		mode = 128;
+		break;
+	default:
+	case TRANSMISSION_MODE_2K:
+		mode = 64;
+		break;
+	}
+	if (state->cfg.diversity_delay == 0)
+		mode = (mode * (1 << (guard)) * 3) / 2 + 48;	// add 50% SFN margin + compensate for one DVSY-fifo
+	else
+		mode = (mode * (1 << (guard)) * 3) / 2 + state->cfg.diversity_delay;	// add 50% SFN margin + compensate for DVSY-fifo
+	mode <<= 4;
+	dib8000_write_word(state, 273, (dib8000_read_word(state, 273) & 0x000f) | mode);
+
+	/* channel estimation fine configuration */
+	switch (max_constellation) {
+	case QAM_64:
+		ana_gain = 0x7;	// -1 : avoid def_est saturation when ADC target is -16dB
+		coeff[0] = 0x0148;	/* P_adp_regul_cnt 0.04 */
+		coeff[1] = 0xfff0;	/* P_adp_noise_cnt -0.002 */
+		coeff[2] = 0x00a4;	/* P_adp_regul_ext 0.02 */
+		coeff[3] = 0xfff8;	/* P_adp_noise_ext -0.001 */
+		//if (!state->cfg.hostbus_diversity) //if diversity, we should prehaps use the configuration of the max_constallation -1
+		break;
+	case QAM_16:
+		ana_gain = 0x7;	// -1 : avoid def_est saturation when ADC target is -16dB
+		coeff[0] = 0x023d;	/* P_adp_regul_cnt 0.07 */
+		coeff[1] = 0xffdf;	/* P_adp_noise_cnt -0.004 */
+		coeff[2] = 0x00a4;	/* P_adp_regul_ext 0.02 */
+		coeff[3] = 0xfff0;	/* P_adp_noise_ext -0.002 */
+		//if (!((state->cfg.hostbus_diversity) && (max_constellation == QAM_16)))
+		break;
+	default:
+		ana_gain = 0;	// 0 : goes along with ADC target at -22dB to keep good mobile performance and lock at sensitivity level
+		coeff[0] = 0x099a;	/* P_adp_regul_cnt 0.3 */
+		coeff[1] = 0xffae;	/* P_adp_noise_cnt -0.01 */
+		coeff[2] = 0x0333;	/* P_adp_regul_ext 0.1 */
+		coeff[3] = 0xfff8;	/* P_adp_noise_ext -0.002 */
+		break;
+	}
+	for (mode = 0; mode < 4; mode++)
+		dib8000_write_word(state, 215 + mode, coeff[mode]);
+
+	// update ana_gain depending on max constellation
+	dib8000_write_word(state, 116, ana_gain);
+	// update ADC target depending on ana_gain
+	if (ana_gain) {		// set -16dB ADC target for ana_gain=-1
+		for (i = 0; i < 10; i++)
+			dib8000_write_word(state, 80 + i, adc_target_16dB[i]);
+	} else {		// set -22dB ADC target for ana_gain=0
+		for (i = 0; i < 10; i++)
+			dib8000_write_word(state, 80 + i, adc_target_16dB[i] - 355);
+	}
+
+	// ---- ANA_FE ----
+	if (state->fe.dtv_property_cache.isdbt_sb_mode) {
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 1)	// 3-segments
+			ana_fe = ana_fe_coeff_3seg;
+		else		// 1-segment
+			ana_fe = ana_fe_coeff_1seg;
+	} else
+		ana_fe = ana_fe_coeff_13seg;
+
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1 || state->isdbt_cfg_loaded == 0)
+		for (mode = 0; mode < 24; mode++)
+			dib8000_write_word(state, 117 + mode, ana_fe[mode]);
+
+	// ---- CHAN_BLK ----
+	for (i = 0; i < 13; i++) {
+		if ((((~seg_diff_mask) >> i) & 1) == 1) {
+			P_cfr_left_edge += (1 << i) * ((i == 0) || ((((seg_mask13 & (~seg_diff_mask)) >> (i - 1)) & 1) == 0));
+			P_cfr_right_edge += (1 << i) * ((i == 12) || ((((seg_mask13 & (~seg_diff_mask)) >> (i + 1)) & 1) == 0));
+		}
+	}
+	dib8000_write_word(state, 222, P_cfr_left_edge);	// P_cfr_left_edge
+	dib8000_write_word(state, 223, P_cfr_right_edge);	// P_cfr_right_edge
+	// "P_cspu_left_edge"  not used => do not care
+	// "P_cspu_right_edge" not used => do not care
+
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {	// ISDB-Tsb
+		dib8000_write_word(state, 228, 1);	// P_2d_mode_byp=1
+		dib8000_write_word(state, 205, dib8000_read_word(state, 205) & 0xfff0);	// P_cspu_win_cut = 0
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 0	// 1-segment
+		    && state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K) {
+			//dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe); // P_adp_pass = 0
+			dib8000_write_word(state, 265, 15);	// P_equal_noise_sel = 15
+		}
+	} else if (state->isdbt_cfg_loaded == 0) {
+		dib8000_write_word(state, 228, 0);	// default value
+		dib8000_write_word(state, 265, 31);	// default value
+		dib8000_write_word(state, 205, 0x200f);	// init value
+	}
+	// ---- TMCC ----
+	for (i = 0; i < 3; i++)
+		tmcc_pow +=
+		    (((state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * 4 + 1) * state->fe.dtv_property_cache.layer[i].segment_count);
+	// Quantif of "P_tmcc_dec_thres_?k" is (0, 5+mode, 9);
+	// Threshold is set at 1/4 of max power.
+	tmcc_pow *= (1 << (9 - 2));
+
+	dib8000_write_word(state, 290, tmcc_pow);	// P_tmcc_dec_thres_2k
+	dib8000_write_word(state, 291, tmcc_pow);	// P_tmcc_dec_thres_4k
+	dib8000_write_word(state, 292, tmcc_pow);	// P_tmcc_dec_thres_8k
+	//dib8000_write_word(state, 287, (1 << 13) | 0x1000 );
+	// ---- PHA3 ----
+
+	if (state->isdbt_cfg_loaded == 0)
+		dib8000_write_word(state, 250, 3285);	/*p_2d_hspeed_thr0 */
+
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1)
+		state->isdbt_cfg_loaded = 0;
+	else
+		state->isdbt_cfg_loaded = 1;
+
+}
+
+static int dib8000_autosearch_start(struct dvb_frontend *fe)
+{
+	u8 factor;
+	u32 value;
+	struct dib8000_state *state = fe->demodulator_priv;
+
+	int slist = 0;
+
+	state->fe.dtv_property_cache.inversion = 0;
+	if (!state->fe.dtv_property_cache.isdbt_sb_mode)
+		state->fe.dtv_property_cache.layer[0].segment_count = 13;
+	state->fe.dtv_property_cache.layer[0].modulation = QAM_64;
+	state->fe.dtv_property_cache.layer[0].fec = FEC_2_3;
+	state->fe.dtv_property_cache.layer[0].interleaving = 0;
+
+	//choose the right list, in sb, always do everything
+	if (state->fe.dtv_property_cache.isdbt_sb_mode) {
+		state->fe.dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
+		state->fe.dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
+		slist = 7;
+		dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));
+	} else {
+		if (state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) {
+			if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) {
+				slist = 7;
+				dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));	// P_mode = 1 to have autosearch start ok with mode2
+			} else
+				slist = 3;
+		} else {
+			if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) {
+				slist = 2;
+				dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));	// P_mode = 1
+			} else
+				slist = 0;
+		}
+
+		if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO)
+			state->fe.dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
+		if (state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO)
+			state->fe.dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
+
+		dprintk("using list for autosearch : %d", slist);
+		dib8000_set_channel(state, (unsigned char)slist, 1);
+		//dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));  // P_mode = 1
+
+		factor = 1;
+
+		//set lock_mask values
+		dib8000_write_word(state, 6, 0x4);
+		dib8000_write_word(state, 7, 0x8);
+		dib8000_write_word(state, 8, 0x1000);
+
+		//set lock_mask wait time values
+		value = 50 * state->cfg.pll->internal * factor;
+		dib8000_write_word(state, 11, (u16) ((value >> 16) & 0xffff));	// lock0 wait time
+		dib8000_write_word(state, 12, (u16) (value & 0xffff));	// lock0 wait time
+		value = 100 * state->cfg.pll->internal * factor;
+		dib8000_write_word(state, 13, (u16) ((value >> 16) & 0xffff));	// lock1 wait time
+		dib8000_write_word(state, 14, (u16) (value & 0xffff));	// lock1 wait time
+		value = 1000 * state->cfg.pll->internal * factor;
+		dib8000_write_word(state, 15, (u16) ((value >> 16) & 0xffff));	// lock2 wait time
+		dib8000_write_word(state, 16, (u16) (value & 0xffff));	// lock2 wait time
+
+		value = dib8000_read_word(state, 0);
+		dib8000_write_word(state, 0, (u16) ((1 << 15) | value));
+		dib8000_read_word(state, 1284);	// reset the INT. n_irq_pending
+		dib8000_write_word(state, 0, (u16) value);
+
+	}
+
+	return 0;
+}
+
+static int dib8000_autosearch_irq(struct dvb_frontend *fe)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	u16 irq_pending = dib8000_read_word(state, 1284);
+
+	if (irq_pending & 0x1) {	// failed
+		dprintk("dib8000_autosearch_irq failed");
+		return 1;
+	}
+
+	if (irq_pending & 0x2) {	// succeeded
+		dprintk("dib8000_autosearch_irq succeeded");
+		return 2;
+	}
+
+	return 0;		// still pending
+}
+
+static int dib8000_tune(struct dvb_frontend *fe)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	int ret = 0;
+	u16 value, mode = fft_to_mode(state);
+
+	// we are already tuned - just resuming from suspend
+	if (state == NULL)
+		return -EINVAL;
+
+	dib8000_set_bandwidth(state, state->fe.dtv_property_cache.bandwidth_hz / 1000);
+	dib8000_set_channel(state, 0, 0);
+
+	// restart demod
+	ret |= dib8000_write_word(state, 770, 0x4000);
+	ret |= dib8000_write_word(state, 770, 0x0000);
+	msleep(45);
+
+	/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3 */
+	/*  ret |= dib8000_write_word(state, 29, (0 << 9) | (4 << 5) | (0 << 4) | (3 << 0) );  workaround inh_isi stays at 1 */
+
+	// never achieved a lock before - wait for timfreq to update
+	if (state->timf == 0) {
+		if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
+			if (state->fe.dtv_property_cache.isdbt_partial_reception == 0)	// Sound Broadcasting mode 1 seg
+				msleep(300);
+			else	// Sound Broadcasting mode 3 seg
+				msleep(500);
+		} else		// 13 seg
+			msleep(200);
+	}
+	//dump_reg(state);
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) {	// Sound Broadcasting mode 1 seg
+
+			/* P_timf_alpha = (13-P_mode) , P_corm_alpha=6, P_corm_thres=0x40  alpha to check on board */
+			dib8000_write_word(state, 32, ((13 - mode) << 12) | (6 << 8) | 0x40);
+			//dib8000_write_word(state, 32, (8 << 12) | (6 << 8) | 0x80);
+
+			/*  P_ctrl_sfreq_step= (12-P_mode)   P_ctrl_sfreq_inh =0     P_ctrl_pha_off_max  */
+			ret |= dib8000_write_word(state, 37, (12 - mode) | ((5 + mode) << 5));
+
+		} else {	// Sound Broadcasting mode 3 seg
+
+			/* P_timf_alpha = (12-P_mode) , P_corm_alpha=6, P_corm_thres=0x60  alpha to check on board */
+			dib8000_write_word(state, 32, ((12 - mode) << 12) | (6 << 8) | 0x60);
+
+			ret |= dib8000_write_word(state, 37, (11 - mode) | ((5 + mode) << 5));
+		}
+
+	} else {		// 13 seg
+		/* P_timf_alpha = 8 , P_corm_alpha=6, P_corm_thres=0x80  alpha to check on board */
+		dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x80);
+
+		ret |= dib8000_write_word(state, 37, (10 - mode) | ((5 + mode) << 5));
+
+	}
+
+	// we achieved a coff_cpil_lock - it's time to update the timf
+	if ((dib8000_read_word(state, 568) >> 11) & 0x1)
+		dib8000_update_timf(state);
+
+	//now that tune is finished, lock0 should lock on fec_mpeg to output this lock on MP_LOCK. It's changed in autosearch start
+	dib8000_write_word(state, 6, 0x200);
+
+	if (state->revision == 0x8002) {
+		value = dib8000_read_word(state, 903);
+		dib8000_write_word(state, 903, value & ~(1 << 3));
+		msleep(1);
+		dib8000_write_word(state, 903, value | (1 << 3));
+	}
+
+	return ret;
+}
+
+static int dib8000_wakeup(struct dvb_frontend *fe)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+
+	dib8000_set_power_mode(state, DIB8000M_POWER_ALL);
+	dib8000_set_adc_state(state, DIBX000_ADC_ON);
+	if (dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
+		dprintk("could not start Slow ADC");
+
+	return 0;
+}
+
+static int dib8000_sleep(struct dvb_frontend *fe)
+{
+	struct dib8000_state *st = fe->demodulator_priv;
+	if (1) {
+		dib8000_set_output_mode(st, OUTMODE_HIGH_Z);
+		dib8000_set_power_mode(st, DIB8000M_POWER_INTERFACE_ONLY);
+		return dib8000_set_adc_state(st, DIBX000_SLOW_ADC_OFF) | dib8000_set_adc_state(st, DIBX000_ADC_OFF);
+	} else {
+
+		return 0;
+	}
+}
+
+static int dib8000_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	u16 i, val = 0;
+
+	fe->dtv_property_cache.bandwidth_hz = 6000000;
+
+	fe->dtv_property_cache.isdbt_sb_mode = dib8000_read_word(state, 508) & 0x1;
+
+	val = dib8000_read_word(state, 570);
+	fe->dtv_property_cache.inversion = (val & 0x40) >> 6;
+	switch ((val & 0x30) >> 4) {
+	case 1:
+		fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_2K;
+		break;
+	case 3:
+	default:
+		fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
+		break;
+	}
+
+	switch (val & 0x3) {
+	case 0:
+		fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_32;
+		dprintk("dib8000_get_frontend GI = 1/32 ");
+		break;
+	case 1:
+		fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_16;
+		dprintk("dib8000_get_frontend GI = 1/16 ");
+		break;
+	case 2:
+		dprintk("dib8000_get_frontend GI = 1/8 ");
+		fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
+		break;
+	case 3:
+		dprintk("dib8000_get_frontend GI = 1/4 ");
+		fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_4;
+		break;
+	}
+
+	val = dib8000_read_word(state, 505);
+	fe->dtv_property_cache.isdbt_partial_reception = val & 1;
+	dprintk("dib8000_get_frontend : partial_reception = %d ", fe->dtv_property_cache.isdbt_partial_reception);
+
+	for (i = 0; i < 3; i++) {
+		val = dib8000_read_word(state, 493 + i);
+		fe->dtv_property_cache.layer[i].segment_count = val & 0x0F;
+		dprintk("dib8000_get_frontend : Layer %d segments = %d ", i, fe->dtv_property_cache.layer[i].segment_count);
+
+		val = dib8000_read_word(state, 499 + i);
+		fe->dtv_property_cache.layer[i].interleaving = val & 0x3;
+		dprintk("dib8000_get_frontend : Layer %d time_intlv = %d ", i, fe->dtv_property_cache.layer[i].interleaving);
+
+		val = dib8000_read_word(state, 481 + i);
+		switch (val & 0x7) {
+		case 1:
+			fe->dtv_property_cache.layer[i].fec = FEC_1_2;
+			dprintk("dib8000_get_frontend : Layer %d Code Rate = 1/2 ", i);
+			break;
+		case 2:
+			fe->dtv_property_cache.layer[i].fec = FEC_2_3;
+			dprintk("dib8000_get_frontend : Layer %d Code Rate = 2/3 ", i);
+			break;
+		case 3:
+			fe->dtv_property_cache.layer[i].fec = FEC_3_4;
+			dprintk("dib8000_get_frontend : Layer %d Code Rate = 3/4 ", i);
+			break;
+		case 5:
+			fe->dtv_property_cache.layer[i].fec = FEC_5_6;
+			dprintk("dib8000_get_frontend : Layer %d Code Rate = 5/6 ", i);
+			break;
+		default:
+			fe->dtv_property_cache.layer[i].fec = FEC_7_8;
+			dprintk("dib8000_get_frontend : Layer %d Code Rate = 7/8 ", i);
+			break;
+		}
+
+		val = dib8000_read_word(state, 487 + i);
+		switch (val & 0x3) {
+		case 0:
+			dprintk("dib8000_get_frontend : Layer %d DQPSK ", i);
+			fe->dtv_property_cache.layer[i].modulation = DQPSK;
+			break;
+		case 1:
+			fe->dtv_property_cache.layer[i].modulation = QPSK;
+			dprintk("dib8000_get_frontend : Layer %d QPSK ", i);
+			break;
+		case 2:
+			fe->dtv_property_cache.layer[i].modulation = QAM_16;
+			dprintk("dib8000_get_frontend : Layer %d QAM16 ", i);
+			break;
+		case 3:
+		default:
+			dprintk("dib8000_get_frontend : Layer %d QAM64 ", i);
+			fe->dtv_property_cache.layer[i].modulation = QAM_64;
+			break;
+		}
+	}
+	return 0;
+}
+
+static int dib8000_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	int time, ret;
+
+	dib8000_set_output_mode(state, OUTMODE_HIGH_Z);
+
+	if (fe->ops.tuner_ops.set_params)
+		fe->ops.tuner_ops.set_params(fe, fep);
+
+	/* start up the AGC */
+	state->tune_state = CT_AGC_START;
+	do {
+		time = dib8000_agc_startup(fe);
+		if (time != FE_CALLBACK_TIME_NEVER)
+			msleep(time / 10);
+		else
+			break;
+	} while (state->tune_state != CT_AGC_STOP);
+
+	if (state->fe.dtv_property_cache.frequency == 0) {
+		dprintk("dib8000: must at least specify frequency ");
+		return 0;
+	}
+
+	if (state->fe.dtv_property_cache.bandwidth_hz == 0) {
+		dprintk("dib8000: no bandwidth specified, set to default ");
+		state->fe.dtv_property_cache.bandwidth_hz = 6000000;
+	}
+
+	state->tune_state = CT_DEMOD_START;
+
+	if ((state->fe.dtv_property_cache.delivery_system != SYS_ISDBT) ||
+	    (state->fe.dtv_property_cache.inversion == INVERSION_AUTO) ||
+	    (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) ||
+	    (state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) ||
+	    (((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 0)) != 0) &&
+	     (state->fe.dtv_property_cache.layer[0].segment_count != 0xff) &&
+	     (state->fe.dtv_property_cache.layer[0].segment_count != 0) &&
+	     ((state->fe.dtv_property_cache.layer[0].modulation == QAM_AUTO) ||
+	      (state->fe.dtv_property_cache.layer[0].fec == FEC_AUTO))) ||
+	    (((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 1)) != 0) &&
+	     (state->fe.dtv_property_cache.layer[1].segment_count != 0xff) &&
+	     (state->fe.dtv_property_cache.layer[1].segment_count != 0) &&
+	     ((state->fe.dtv_property_cache.layer[1].modulation == QAM_AUTO) ||
+	      (state->fe.dtv_property_cache.layer[1].fec == FEC_AUTO))) ||
+	    (((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 2)) != 0) &&
+	     (state->fe.dtv_property_cache.layer[2].segment_count != 0xff) &&
+	     (state->fe.dtv_property_cache.layer[2].segment_count != 0) &&
+	     ((state->fe.dtv_property_cache.layer[2].modulation == QAM_AUTO) ||
+	      (state->fe.dtv_property_cache.layer[2].fec == FEC_AUTO))) ||
+	    (((state->fe.dtv_property_cache.layer[0].segment_count == 0) ||
+	      ((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 0)) == 0)) &&
+	     ((state->fe.dtv_property_cache.layer[1].segment_count == 0) ||
+	      ((state->fe.dtv_property_cache.isdbt_layer_enabled & (2 << 0)) == 0)) &&
+	     ((state->fe.dtv_property_cache.layer[2].segment_count == 0) || ((state->fe.dtv_property_cache.isdbt_layer_enabled & (3 << 0)) == 0)))) {
+		int i = 800, found;
+
+		dib8000_set_bandwidth(state, fe->dtv_property_cache.bandwidth_hz / 1000);
+		dib8000_autosearch_start(fe);
+		do {
+			msleep(10);
+			found = dib8000_autosearch_irq(fe);
+		} while (found == 0 && i--);
+
+		dprintk("Frequency %d Hz, autosearch returns: %d", fep->frequency, found);
+
+		if (found == 0 || found == 1)
+			return 0;	// no channel found
+
+		dib8000_get_frontend(fe, fep);
+	}
+
+	ret = dib8000_tune(fe);
+
+	/* make this a config parameter */
+	dib8000_set_output_mode(state, state->cfg.output_mode);
+
+	return ret;
+}
+
+static int dib8000_read_status(struct dvb_frontend *fe, fe_status_t * stat)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	u16 lock = dib8000_read_word(state, 568);
+
+	*stat = 0;
+
+	if ((lock >> 14) & 1)	// AGC
+		*stat |= FE_HAS_SIGNAL;
+
+	if ((lock >> 8) & 1)	// Equal
+		*stat |= FE_HAS_CARRIER;
+
+	if ((lock >> 3) & 1)	// TMCC_SYNC
+		*stat |= FE_HAS_SYNC;
+
+	if ((lock >> 5) & 7)	// FEC MPEG
+		*stat |= FE_HAS_LOCK;
+
+	lock = dib8000_read_word(state, 554);	// Viterbi Layer A
+	if (lock & 0x01)
+		*stat |= FE_HAS_VITERBI;
+
+	lock = dib8000_read_word(state, 555);	// Viterbi Layer B
+	if (lock & 0x01)
+		*stat |= FE_HAS_VITERBI;
+
+	lock = dib8000_read_word(state, 556);	// Viterbi Layer C
+	if (lock & 0x01)
+		*stat |= FE_HAS_VITERBI;
+
+	return 0;
+}
+
+static int dib8000_read_ber(struct dvb_frontend *fe, u32 * ber)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	*ber = (dib8000_read_word(state, 560) << 16) | dib8000_read_word(state, 561);	// 13 segments
+	return 0;
+}
+
+static int dib8000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	*unc = dib8000_read_word(state, 565);	// packet error on 13 seg
+	return 0;
+}
+
+static int dib8000_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	u16 val = dib8000_read_word(state, 390);
+	*strength = 65535 - val;
+	return 0;
+}
+
+static int dib8000_read_snr(struct dvb_frontend *fe, u16 * snr)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	u16 val;
+	s32 signal_mant, signal_exp, noise_mant, noise_exp;
+	u32 result = 0;
+
+	val = dib8000_read_word(state, 542);
+	noise_mant = (val >> 6) & 0xff;
+	noise_exp = (val & 0x3f);
+
+	val = dib8000_read_word(state, 543);
+	signal_mant = (val >> 6) & 0xff;
+	signal_exp = (val & 0x3f);
+
+	if ((noise_exp & 0x20) != 0)
+		noise_exp -= 0x40;
+	if ((signal_exp & 0x20) != 0)
+		signal_exp -= 0x40;
+
+	if (signal_mant != 0)
+		result = intlog10(2) * 10 * signal_exp + 10 * intlog10(signal_mant);
+	else
+		result = intlog10(2) * 10 * signal_exp - 100;
+	if (noise_mant != 0)
+		result -= intlog10(2) * 10 * noise_exp + 10 * intlog10(noise_mant);
+	else
+		result -= intlog10(2) * 10 * noise_exp - 100;
+
+	*snr = result / (1 << 24);
+	return 0;
+}
+
+int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr)
+{
+	int k = 0;
+	u8 new_addr = 0;
+	struct i2c_device client = {.adap = host };
+
+	for (k = no_of_demods - 1; k >= 0; k--) {
+		/* designated i2c address */
+		new_addr = first_addr + (k << 1);
+
+		client.addr = new_addr;
+		dib8000_i2c_write16(&client, 1287, 0x0003);	/* sram lead in, rdy */
+		if (dib8000_identify(&client) == 0) {
+			dib8000_i2c_write16(&client, 1287, 0x0003);	/* sram lead in, rdy */
+			client.addr = default_addr;
+			if (dib8000_identify(&client) == 0) {
+				dprintk("#%d: not identified", k);
+				return -EINVAL;
+			}
+		}
+
+		/* start diversity to pull_down div_str - just for i2c-enumeration */
+		dib8000_i2c_write16(&client, 1286, (1 << 10) | (4 << 6));
+
+		/* set new i2c address and force divstart */
+		dib8000_i2c_write16(&client, 1285, (new_addr << 2) | 0x2);
+		client.addr = new_addr;
+		dib8000_identify(&client);
+
+		dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr);
+	}
+
+	for (k = 0; k < no_of_demods; k++) {
+		new_addr = first_addr | (k << 1);
+		client.addr = new_addr;
+
+		// unforce divstr
+		dib8000_i2c_write16(&client, 1285, new_addr << 2);
+
+		/* deactivate div - it was just for i2c-enumeration */
+		dib8000_i2c_write16(&client, 1286, 0);
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dib8000_i2c_enumeration);
+static int dib8000_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune)
+{
+	tune->min_delay_ms = 1000;
+	tune->step_size = 0;
+	tune->max_drift = 0;
+	return 0;
+}
+
+static void dib8000_release(struct dvb_frontend *fe)
+{
+	struct dib8000_state *st = fe->demodulator_priv;
+	dibx000_exit_i2c_master(&st->i2c_master);
+	kfree(st);
+}
+
+struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating)
+{
+	struct dib8000_state *st = fe->demodulator_priv;
+	return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
+}
+
+EXPORT_SYMBOL(dib8000_get_i2c_master);
+
+static const struct dvb_frontend_ops dib8000_ops = {
+	.info = {
+		 .name = "DiBcom 8000 ISDB-T",
+		 .type = FE_OFDM,
+		 .frequency_min = 44250000,
+		 .frequency_max = 867250000,
+		 .frequency_stepsize = 62500,
+		 .caps = FE_CAN_INVERSION_AUTO |
+		 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+		 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+		 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+		 FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO,
+		 },
+
+	.release = dib8000_release,
+
+	.init = dib8000_wakeup,
+	.sleep = dib8000_sleep,
+
+	.set_frontend = dib8000_set_frontend,
+	.get_tune_settings = dib8000_fe_get_tune_settings,
+	.get_frontend = dib8000_get_frontend,
+
+	.read_status = dib8000_read_status,
+	.read_ber = dib8000_read_ber,
+	.read_signal_strength = dib8000_read_signal_strength,
+	.read_snr = dib8000_read_snr,
+	.read_ucblocks = dib8000_read_unc_blocks,
+};
+
+struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg)
+{
+	struct dvb_frontend *fe;
+	struct dib8000_state *state;
+
+	dprintk("dib8000_attach");
+
+	state = kzalloc(sizeof(struct dib8000_state), GFP_KERNEL);
+	if (state == NULL)
+		return NULL;
+
+	memcpy(&state->cfg, cfg, sizeof(struct dib8000_config));
+	state->i2c.adap = i2c_adap;
+	state->i2c.addr = i2c_addr;
+	state->gpio_val = cfg->gpio_val;
+	state->gpio_dir = cfg->gpio_dir;
+
+	/* Ensure the output mode remains at the previous default if it's
+	 * not specifically set by the caller.
+	 */
+	if ((state->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (state->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK))
+		state->cfg.output_mode = OUTMODE_MPEG2_FIFO;
+
+	fe = &state->fe;
+	fe->demodulator_priv = state;
+	memcpy(&state->fe.ops, &dib8000_ops, sizeof(struct dvb_frontend_ops));
+
+	state->timf_default = cfg->pll->timf;
+
+	if (dib8000_identify(&state->i2c) == 0)
+		goto error;
+
+	dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr);
+
+	dib8000_reset(fe);
+
+	dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & ~0x60) | (3 << 5));	/* ber_rs_len = 3 */
+
+	return fe;
+
+ error:
+	kfree(state);
+	return NULL;
+}
+
+EXPORT_SYMBOL(dib8000_attach);
+
+MODULE_AUTHOR("Olivier Grenie <Olivier.Grenie@dibcom.fr, " "Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_DESCRIPTION("Driver for the DiBcom 8000 ISDB-T demodulator");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dib8000.h b/drivers/media/dvb/frontends/dib8000.h
new file mode 100644
index 000000000000..a86de340dd54
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib8000.h
@@ -0,0 +1,79 @@
+#ifndef DIB8000_H
+#define DIB8000_H
+
+#include "dibx000_common.h"
+
+struct dib8000_config {
+	u8 output_mpeg2_in_188_bytes;
+	u8 hostbus_diversity;
+	u8 tuner_is_baseband;
+	int (*update_lna) (struct dvb_frontend *, u16 agc_global);
+
+	u8 agc_config_count;
+	struct dibx000_agc_config *agc;
+	struct dibx000_bandwidth_config *pll;
+
+#define DIB8000_GPIO_DEFAULT_DIRECTIONS 0xffff
+	u16 gpio_dir;
+#define DIB8000_GPIO_DEFAULT_VALUES     0x0000
+	u16 gpio_val;
+#define DIB8000_GPIO_PWM_POS0(v)        ((v & 0xf) << 12)
+#define DIB8000_GPIO_PWM_POS1(v)        ((v & 0xf) << 8 )
+#define DIB8000_GPIO_PWM_POS2(v)        ((v & 0xf) << 4 )
+#define DIB8000_GPIO_PWM_POS3(v)         (v & 0xf)
+#define DIB8000_GPIO_DEFAULT_PWM_POS    0xffff
+	u16 gpio_pwm_pos;
+	u16 pwm_freq_div;
+
+	void (*agc_control) (struct dvb_frontend *, u8 before);
+
+	u16 drives;
+	u16 diversity_delay;
+	u8 div_cfg;
+	u8 output_mode;
+	u8 refclksel;
+};
+
+#define DEFAULT_DIB8000_I2C_ADDRESS 18
+
+#if defined(CONFIG_DVB_DIB8000) || (defined(CONFIG_DVB_DIB8000_MODULE) && defined(MODULE))
+extern struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg);
+extern struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
+
+extern int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr);
+
+extern int dib8000_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val);
+extern int dib8000_set_wbd_ref(struct dvb_frontend *, u16 value);
+#else
+static inline struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+static inline struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface i, int x)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+#endif
+
+#endif
diff --git a/drivers/media/dvb/frontends/dibx000_common.c b/drivers/media/dvb/frontends/dibx000_common.c
index 315e09e95b0c..4efca30d2127 100644
--- a/drivers/media/dvb/frontends/dibx000_common.c
+++ b/drivers/media/dvb/frontends/dibx000_common.c
@@ -15,29 +15,31 @@ static int dibx000_write_word(struct dibx000_i2c_master *mst, u16 reg, u16 val)
 		(val >> 8) & 0xff, val & 0xff,
 	};
 	struct i2c_msg msg = {
-		.addr = mst->i2c_addr, .flags = 0, .buf = b, .len = 4
+		.addr = mst->i2c_addr,.flags = 0,.buf = b,.len = 4
 	};
 	return i2c_transfer(mst->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
 }
 
 
-static int dibx000_i2c_select_interface(struct dibx000_i2c_master *mst, enum dibx000_i2c_interface intf)
+static int dibx000_i2c_select_interface(struct dibx000_i2c_master *mst,
+					enum dibx000_i2c_interface intf)
 {
 	if (mst->device_rev > DIB3000MC && mst->selected_interface != intf) {
-		dprintk("selecting interface: %d\n",intf);
+		dprintk("selecting interface: %d\n", intf);
 		mst->selected_interface = intf;
 		return dibx000_write_word(mst, mst->base_reg + 4, intf);
 	}
 	return 0;
 }
 
-static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4], u8 addr, int onoff)
+static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4],
+				 u8 addr, int onoff)
 {
 	u16 val;
 
 
 	if (onoff)
-		val = addr << 8; // bit 7 = use master or not, if 0, the gate is open
+		val = addr << 8;	// bit 7 = use master or not, if 0, the gate is open
 	else
 		val = 1 << 7;
 
@@ -45,7 +47,7 @@ static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4], u8 ad
 		val <<= 1;
 
 	tx[0] = (((mst->base_reg + 1) >> 8) & 0xff);
-	tx[1] = ( (mst->base_reg + 1)       & 0xff);
+	tx[1] = ((mst->base_reg + 1) & 0xff);
 	tx[2] = val >> 8;
 	tx[3] = val & 0xff;
 
@@ -57,59 +59,78 @@ static u32 dibx000_i2c_func(struct i2c_adapter *adapter)
 	return I2C_FUNC_I2C;
 }
 
-static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
+static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap,
+					struct i2c_msg msg[], int num)
 {
 	struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
 	struct i2c_msg m[2 + num];
 	u8 tx_open[4], tx_close[4];
 
-	memset(m,0, sizeof(struct i2c_msg) * (2 + num));
+	memset(m, 0, sizeof(struct i2c_msg) * (2 + num));
 
 	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER);
 
-	dibx000_i2c_gate_ctrl(mst, tx_open,  msg[0].addr, 1);
+	dibx000_i2c_gate_ctrl(mst, tx_open, msg[0].addr, 1);
 	m[0].addr = mst->i2c_addr;
-	m[0].buf  = tx_open;
-	m[0].len  = 4;
+	m[0].buf = tx_open;
+	m[0].len = 4;
 
 	memcpy(&m[1], msg, sizeof(struct i2c_msg) * num);
 
 	dibx000_i2c_gate_ctrl(mst, tx_close, 0, 0);
-	m[num+1].addr = mst->i2c_addr;
-	m[num+1].buf  = tx_close;
-	m[num+1].len  = 4;
+	m[num + 1].addr = mst->i2c_addr;
+	m[num + 1].buf = tx_close;
+	m[num + 1].len = 4;
 
-	return i2c_transfer(mst->i2c_adap, m, 2+num) == 2 + num ? num : -EIO;
+	return i2c_transfer(mst->i2c_adap, m, 2 + num) == 2 + num ? num : -EIO;
 }
 
 static struct i2c_algorithm dibx000_i2c_gated_tuner_algo = {
-	.master_xfer   = dibx000_i2c_gated_tuner_xfer,
+	.master_xfer = dibx000_i2c_gated_tuner_xfer,
 	.functionality = dibx000_i2c_func,
 };
 
-struct i2c_adapter * dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst, enum dibx000_i2c_interface intf, int gating)
+struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst,
+					    enum dibx000_i2c_interface intf,
+					    int gating)
 {
 	struct i2c_adapter *i2c = NULL;
 
 	switch (intf) {
-		case DIBX000_I2C_INTERFACE_TUNER:
-			if (gating)
-				i2c = &mst->gated_tuner_i2c_adap;
-			break;
-		default:
-			printk(KERN_ERR "DiBX000: incorrect I2C interface selected\n");
-			break;
+	case DIBX000_I2C_INTERFACE_TUNER:
+		if (gating)
+			i2c = &mst->gated_tuner_i2c_adap;
+		break;
+	default:
+		printk(KERN_ERR "DiBX000: incorrect I2C interface selected\n");
+		break;
 	}
 
 	return i2c;
 }
+
 EXPORT_SYMBOL(dibx000_get_i2c_adapter);
 
-static int i2c_adapter_init(struct i2c_adapter *i2c_adap, struct i2c_algorithm *algo, const char *name, struct dibx000_i2c_master *mst)
+void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst)
+{
+	/* initialize the i2c-master by closing the gate */
+	u8 tx[4];
+	struct i2c_msg m = {.addr = mst->i2c_addr,.buf = tx,.len = 4 };
+
+	dibx000_i2c_gate_ctrl(mst, tx, 0, 0);
+	i2c_transfer(mst->i2c_adap, &m, 1);
+	mst->selected_interface = 0xff;	// the first time force a select of the I2C
+	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER);
+}
+
+EXPORT_SYMBOL(dibx000_reset_i2c_master);
+
+static int i2c_adapter_init(struct i2c_adapter *i2c_adap,
+			    struct i2c_algorithm *algo, const char *name,
+			    struct dibx000_i2c_master *mst)
 {
 	strncpy(i2c_adap->name, name, sizeof(i2c_adap->name));
-	i2c_adap->class     = I2C_CLASS_TV_DIGITAL,
-	i2c_adap->algo      = algo;
+	i2c_adap->class = I2C_CLASS_TV_DIGITAL, i2c_adap->algo = algo;
 	i2c_adap->algo_data = NULL;
 	i2c_set_adapdata(i2c_adap, mst);
 	if (i2c_add_adapter(i2c_adap) < 0)
@@ -117,34 +138,40 @@ static int i2c_adapter_init(struct i2c_adapter *i2c_adap, struct i2c_algorithm *
 	return 0;
 }
 
-int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev, struct i2c_adapter *i2c_adap, u8 i2c_addr)
+int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev,
+			    struct i2c_adapter *i2c_adap, u8 i2c_addr)
 {
 	u8 tx[4];
-	struct i2c_msg m = { .addr = i2c_addr >> 1, .buf = tx, .len = 4 };
+	struct i2c_msg m = {.addr = i2c_addr >> 1,.buf = tx,.len = 4 };
 
 	mst->device_rev = device_rev;
-	mst->i2c_adap   = i2c_adap;
-	mst->i2c_addr   = i2c_addr >> 1;
+	mst->i2c_adap = i2c_adap;
+	mst->i2c_addr = i2c_addr >> 1;
 
-	if (device_rev == DIB7000P)
+	if (device_rev == DIB7000P || device_rev == DIB8000)
 		mst->base_reg = 1024;
 	else
 		mst->base_reg = 768;
 
-    if (i2c_adapter_init(&mst->gated_tuner_i2c_adap, &dibx000_i2c_gated_tuner_algo, "DiBX000 tuner I2C bus", mst) != 0)
-		printk(KERN_ERR "DiBX000: could not initialize the tuner i2c_adapter\n");
+	if (i2c_adapter_init
+	    (&mst->gated_tuner_i2c_adap, &dibx000_i2c_gated_tuner_algo,
+	     "DiBX000 tuner I2C bus", mst) != 0)
+		printk(KERN_ERR
+		       "DiBX000: could not initialize the tuner i2c_adapter\n");
 
 	/* initialize the i2c-master by closing the gate */
 	dibx000_i2c_gate_ctrl(mst, tx, 0, 0);
 
 	return i2c_transfer(i2c_adap, &m, 1) == 1;
 }
+
 EXPORT_SYMBOL(dibx000_init_i2c_master);
 
 void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst)
 {
 	i2c_del_adapter(&mst->gated_tuner_i2c_adap);
 }
+
 EXPORT_SYMBOL(dibx000_exit_i2c_master);
 
 MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
diff --git a/drivers/media/dvb/frontends/dibx000_common.h b/drivers/media/dvb/frontends/dibx000_common.h
index 84e4d5362922..5be10eca07c0 100644
--- a/drivers/media/dvb/frontends/dibx000_common.h
+++ b/drivers/media/dvb/frontends/dibx000_common.h
@@ -2,7 +2,7 @@
 #define DIBX000_COMMON_H
 
 enum dibx000_i2c_interface {
-	DIBX000_I2C_INTERFACE_TUNER    = 0,
+	DIBX000_I2C_INTERFACE_TUNER = 0,
 	DIBX000_I2C_INTERFACE_GPIO_1_2 = 1,
 	DIBX000_I2C_INTERFACE_GPIO_3_4 = 2
 };
@@ -12,22 +12,29 @@ struct dibx000_i2c_master {
 #define DIB7000   2
 #define DIB7000P  11
 #define DIB7000MC 12
+#define DIB8000   13
 	u16 device_rev;
 
 	enum dibx000_i2c_interface selected_interface;
 
-//	struct i2c_adapter  tuner_i2c_adap;
-	struct i2c_adapter  gated_tuner_i2c_adap;
+//      struct i2c_adapter  tuner_i2c_adap;
+	struct i2c_adapter gated_tuner_i2c_adap;
 
 	struct i2c_adapter *i2c_adap;
-	u8                  i2c_addr;
+	u8 i2c_addr;
 
 	u16 base_reg;
 };
 
-extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev, struct i2c_adapter *i2c_adap, u8 i2c_addr);
-extern struct i2c_adapter * dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst, enum dibx000_i2c_interface intf, int gating);
+extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst,
+				   u16 device_rev, struct i2c_adapter *i2c_adap,
+				   u8 i2c_addr);
+extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master
+						   *mst,
+						   enum dibx000_i2c_interface
+						   intf, int gating);
 extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst);
+extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst);
 
 #define BAND_LBAND 0x01
 #define BAND_UHF   0x02
@@ -41,18 +48,18 @@ extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst);
 									(freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND )
 
 struct dibx000_agc_config {
-	/* defines the capabilities of this AGC-setting - using the BAND_-defines*/
-	u8  band_caps;
+	/* defines the capabilities of this AGC-setting - using the BAND_-defines */
+	u8 band_caps;
 
 	u16 setup;
 
 	u16 inv_gain;
 	u16 time_stabiliz;
 
-	u8  alpha_level;
+	u8 alpha_level;
 	u16 thlock;
 
-	u8  wbd_inv;
+	u8 wbd_inv;
 	u16 wbd_ref;
 	u8 wbd_sel;
 	u8 wbd_alpha;
@@ -92,8 +99,8 @@ struct dibx000_agc_config {
 };
 
 struct dibx000_bandwidth_config {
-	u32   internal;
-	u32   sampling;
+	u32 internal;
+	u32 sampling;
 
 	u8 pll_prediv;
 	u8 pll_ratio;
diff --git a/drivers/media/dvb/frontends/lgdt3304.c b/drivers/media/dvb/frontends/lgdt3304.c
index eb72a9866c93..e334b5d4e578 100644
--- a/drivers/media/dvb/frontends/lgdt3304.c
+++ b/drivers/media/dvb/frontends/lgdt3304.c
@@ -363,6 +363,8 @@ struct dvb_frontend* lgdt3304_attach(const struct lgdt3304_config *config,
 
 	struct lgdt3304_state *state;
 	state = kzalloc(sizeof(struct lgdt3304_state), GFP_KERNEL);
+	if (state == NULL)
+		return NULL;
 	state->addr = config->i2c_address;
 	state->i2c = i2c;
 
diff --git a/drivers/media/dvb/frontends/s921_module.c b/drivers/media/dvb/frontends/s921_module.c
index 3f5a0e1dfdf5..3156b64cfc96 100644
--- a/drivers/media/dvb/frontends/s921_module.c
+++ b/drivers/media/dvb/frontends/s921_module.c
@@ -169,6 +169,8 @@ struct dvb_frontend* s921_attach(const struct s921_config *config,
 
 	struct s921_state *state;
 	state = kzalloc(sizeof(struct s921_state), GFP_KERNEL);
+	if (state == NULL)
+		return NULL;
 
 	state->addr = config->i2c_address;
 	state->i2c = i2c;
diff --git a/drivers/media/dvb/pt1/Kconfig b/drivers/media/dvb/pt1/Kconfig
new file mode 100644
index 000000000000..24501d5bf70d
--- /dev/null
+++ b/drivers/media/dvb/pt1/Kconfig
@@ -0,0 +1,12 @@
+config DVB_PT1
+	tristate "PT1 cards"
+	depends on DVB_CORE && PCI && I2C
+	help
+	  Support for Earthsoft PT1 PCI cards.
+
+	  Since these cards have no MPEG decoder onboard, they transmit
+	  only compressed MPEG data over the PCI bus, so you need
+	  an external software decoder to watch TV on your computer.
+
+	  Say Y or M if you own such a device and want to use it.
+
diff --git a/drivers/media/dvb/pt1/Makefile b/drivers/media/dvb/pt1/Makefile
new file mode 100644
index 000000000000..a66da17bbe31
--- /dev/null
+++ b/drivers/media/dvb/pt1/Makefile
@@ -0,0 +1,5 @@
+earth-pt1-objs := pt1.o va1j5jf8007s.o va1j5jf8007t.o
+
+obj-$(CONFIG_DVB_PT1) += earth-pt1.o
+
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core -Idrivers/media/dvb/frontends
diff --git a/drivers/media/dvb/pt1/pt1.c b/drivers/media/dvb/pt1/pt1.c
new file mode 100644
index 000000000000..1fd8306371e2
--- /dev/null
+++ b/drivers/media/dvb/pt1/pt1.c
@@ -0,0 +1,1058 @@
+/*
+ * driver for Earthsoft PT1
+ *
+ * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
+ *
+ * based on pt1dvr - http://pt1dvr.sourceforge.jp/
+ * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+#include <linux/pci.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/vmalloc.h>
+
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dmxdev.h"
+#include "dvb_net.h"
+#include "dvb_frontend.h"
+
+#include "va1j5jf8007t.h"
+#include "va1j5jf8007s.h"
+
+#define DRIVER_NAME "earth-pt1"
+
+#define PT1_PAGE_SHIFT 12
+#define PT1_PAGE_SIZE (1 << PT1_PAGE_SHIFT)
+#define PT1_NR_UPACKETS 1024
+#define PT1_NR_BUFS 511
+
+struct pt1_buffer_page {
+	__le32 upackets[PT1_NR_UPACKETS];
+};
+
+struct pt1_table_page {
+	__le32 next_pfn;
+	__le32 buf_pfns[PT1_NR_BUFS];
+};
+
+struct pt1_buffer {
+	struct pt1_buffer_page *page;
+	dma_addr_t addr;
+};
+
+struct pt1_table {
+	struct pt1_table_page *page;
+	dma_addr_t addr;
+	struct pt1_buffer bufs[PT1_NR_BUFS];
+};
+
+#define PT1_NR_ADAPS 4
+
+struct pt1_adapter;
+
+struct pt1 {
+	struct pci_dev *pdev;
+	void __iomem *regs;
+	struct i2c_adapter i2c_adap;
+	int i2c_running;
+	struct pt1_adapter *adaps[PT1_NR_ADAPS];
+	struct pt1_table *tables;
+	struct task_struct *kthread;
+};
+
+struct pt1_adapter {
+	struct pt1 *pt1;
+	int index;
+
+	u8 *buf;
+	int upacket_count;
+	int packet_count;
+
+	struct dvb_adapter adap;
+	struct dvb_demux demux;
+	int users;
+	struct dmxdev dmxdev;
+	struct dvb_net net;
+	struct dvb_frontend *fe;
+	int (*orig_set_voltage)(struct dvb_frontend *fe,
+				fe_sec_voltage_t voltage);
+};
+
+#define pt1_printk(level, pt1, format, arg...)	\
+	dev_printk(level, &(pt1)->pdev->dev, format, ##arg)
+
+static void pt1_write_reg(struct pt1 *pt1, int reg, u32 data)
+{
+	writel(data, pt1->regs + reg * 4);
+}
+
+static u32 pt1_read_reg(struct pt1 *pt1, int reg)
+{
+	return readl(pt1->regs + reg * 4);
+}
+
+static int pt1_nr_tables = 64;
+module_param_named(nr_tables, pt1_nr_tables, int, 0);
+
+static void pt1_increment_table_count(struct pt1 *pt1)
+{
+	pt1_write_reg(pt1, 0, 0x00000020);
+}
+
+static void pt1_init_table_count(struct pt1 *pt1)
+{
+	pt1_write_reg(pt1, 0, 0x00000010);
+}
+
+static void pt1_register_tables(struct pt1 *pt1, u32 first_pfn)
+{
+	pt1_write_reg(pt1, 5, first_pfn);
+	pt1_write_reg(pt1, 0, 0x0c000040);
+}
+
+static void pt1_unregister_tables(struct pt1 *pt1)
+{
+	pt1_write_reg(pt1, 0, 0x08080000);
+}
+
+static int pt1_sync(struct pt1 *pt1)
+{
+	int i;
+	for (i = 0; i < 57; i++) {
+		if (pt1_read_reg(pt1, 0) & 0x20000000)
+			return 0;
+		pt1_write_reg(pt1, 0, 0x00000008);
+	}
+	pt1_printk(KERN_ERR, pt1, "could not sync\n");
+	return -EIO;
+}
+
+static u64 pt1_identify(struct pt1 *pt1)
+{
+	int i;
+	u64 id;
+	id = 0;
+	for (i = 0; i < 57; i++) {
+		id |= (u64)(pt1_read_reg(pt1, 0) >> 30 & 1) << i;
+		pt1_write_reg(pt1, 0, 0x00000008);
+	}
+	return id;
+}
+
+static int pt1_unlock(struct pt1 *pt1)
+{
+	int i;
+	pt1_write_reg(pt1, 0, 0x00000008);
+	for (i = 0; i < 3; i++) {
+		if (pt1_read_reg(pt1, 0) & 0x80000000)
+			return 0;
+		schedule_timeout_uninterruptible((HZ + 999) / 1000);
+	}
+	pt1_printk(KERN_ERR, pt1, "could not unlock\n");
+	return -EIO;
+}
+
+static int pt1_reset_pci(struct pt1 *pt1)
+{
+	int i;
+	pt1_write_reg(pt1, 0, 0x01010000);
+	pt1_write_reg(pt1, 0, 0x01000000);
+	for (i = 0; i < 10; i++) {
+		if (pt1_read_reg(pt1, 0) & 0x00000001)
+			return 0;
+		schedule_timeout_uninterruptible((HZ + 999) / 1000);
+	}
+	pt1_printk(KERN_ERR, pt1, "could not reset PCI\n");
+	return -EIO;
+}
+
+static int pt1_reset_ram(struct pt1 *pt1)
+{
+	int i;
+	pt1_write_reg(pt1, 0, 0x02020000);
+	pt1_write_reg(pt1, 0, 0x02000000);
+	for (i = 0; i < 10; i++) {
+		if (pt1_read_reg(pt1, 0) & 0x00000002)
+			return 0;
+		schedule_timeout_uninterruptible((HZ + 999) / 1000);
+	}
+	pt1_printk(KERN_ERR, pt1, "could not reset RAM\n");
+	return -EIO;
+}
+
+static int pt1_do_enable_ram(struct pt1 *pt1)
+{
+	int i, j;
+	u32 status;
+	status = pt1_read_reg(pt1, 0) & 0x00000004;
+	pt1_write_reg(pt1, 0, 0x00000002);
+	for (i = 0; i < 10; i++) {
+		for (j = 0; j < 1024; j++) {
+			if ((pt1_read_reg(pt1, 0) & 0x00000004) != status)
+				return 0;
+		}
+		schedule_timeout_uninterruptible((HZ + 999) / 1000);
+	}
+	pt1_printk(KERN_ERR, pt1, "could not enable RAM\n");
+	return -EIO;
+}
+
+static int pt1_enable_ram(struct pt1 *pt1)
+{
+	int i, ret;
+	schedule_timeout_uninterruptible((HZ + 999) / 1000);
+	for (i = 0; i < 10; i++) {
+		ret = pt1_do_enable_ram(pt1);
+		if (ret < 0)
+			return ret;
+	}
+	return 0;
+}
+
+static void pt1_disable_ram(struct pt1 *pt1)
+{
+	pt1_write_reg(pt1, 0, 0x0b0b0000);
+}
+
+static void pt1_set_stream(struct pt1 *pt1, int index, int enabled)
+{
+	pt1_write_reg(pt1, 2, 1 << (index + 8) | enabled << index);
+}
+
+static void pt1_init_streams(struct pt1 *pt1)
+{
+	int i;
+	for (i = 0; i < PT1_NR_ADAPS; i++)
+		pt1_set_stream(pt1, i, 0);
+}
+
+static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page)
+{
+	u32 upacket;
+	int i;
+	int index;
+	struct pt1_adapter *adap;
+	int offset;
+	u8 *buf;
+
+	if (!page->upackets[PT1_NR_UPACKETS - 1])
+		return 0;
+
+	for (i = 0; i < PT1_NR_UPACKETS; i++) {
+		upacket = le32_to_cpu(page->upackets[i]);
+		index = (upacket >> 29) - 1;
+		if (index < 0 || index >=  PT1_NR_ADAPS)
+			continue;
+
+		adap = pt1->adaps[index];
+		if (upacket >> 25 & 1)
+			adap->upacket_count = 0;
+		else if (!adap->upacket_count)
+			continue;
+
+		buf = adap->buf;
+		offset = adap->packet_count * 188 + adap->upacket_count * 3;
+		buf[offset] = upacket >> 16;
+		buf[offset + 1] = upacket >> 8;
+		if (adap->upacket_count != 62)
+			buf[offset + 2] = upacket;
+
+		if (++adap->upacket_count >= 63) {
+			adap->upacket_count = 0;
+			if (++adap->packet_count >= 21) {
+				dvb_dmx_swfilter_packets(&adap->demux, buf, 21);
+				adap->packet_count = 0;
+			}
+		}
+	}
+
+	page->upackets[PT1_NR_UPACKETS - 1] = 0;
+	return 1;
+}
+
+static int pt1_thread(void *data)
+{
+	struct pt1 *pt1;
+	int table_index;
+	int buf_index;
+	struct pt1_buffer_page *page;
+
+	pt1 = data;
+	set_freezable();
+
+	table_index = 0;
+	buf_index = 0;
+
+	while (!kthread_should_stop()) {
+		try_to_freeze();
+
+		page = pt1->tables[table_index].bufs[buf_index].page;
+		if (!pt1_filter(pt1, page)) {
+			schedule_timeout_interruptible((HZ + 999) / 1000);
+			continue;
+		}
+
+		if (++buf_index >= PT1_NR_BUFS) {
+			pt1_increment_table_count(pt1);
+			buf_index = 0;
+			if (++table_index >= pt1_nr_tables)
+				table_index = 0;
+		}
+	}
+
+	return 0;
+}
+
+static void pt1_free_page(struct pt1 *pt1, void *page, dma_addr_t addr)
+{
+	dma_free_coherent(&pt1->pdev->dev, PT1_PAGE_SIZE, page, addr);
+}
+
+static void *pt1_alloc_page(struct pt1 *pt1, dma_addr_t *addrp, u32 *pfnp)
+{
+	void *page;
+	dma_addr_t addr;
+
+	page = dma_alloc_coherent(&pt1->pdev->dev, PT1_PAGE_SIZE, &addr,
+				  GFP_KERNEL);
+	if (page == NULL)
+		return NULL;
+
+	BUG_ON(addr & (PT1_PAGE_SIZE - 1));
+	BUG_ON(addr >> PT1_PAGE_SHIFT >> 31 >> 1);
+
+	*addrp = addr;
+	*pfnp = addr >> PT1_PAGE_SHIFT;
+	return page;
+}
+
+static void pt1_cleanup_buffer(struct pt1 *pt1, struct pt1_buffer *buf)
+{
+	pt1_free_page(pt1, buf->page, buf->addr);
+}
+
+static int
+pt1_init_buffer(struct pt1 *pt1, struct pt1_buffer *buf,  u32 *pfnp)
+{
+	struct pt1_buffer_page *page;
+	dma_addr_t addr;
+
+	page = pt1_alloc_page(pt1, &addr, pfnp);
+	if (page == NULL)
+		return -ENOMEM;
+
+	page->upackets[PT1_NR_UPACKETS - 1] = 0;
+
+	buf->page = page;
+	buf->addr = addr;
+	return 0;
+}
+
+static void pt1_cleanup_table(struct pt1 *pt1, struct pt1_table *table)
+{
+	int i;
+
+	for (i = 0; i < PT1_NR_BUFS; i++)
+		pt1_cleanup_buffer(pt1, &table->bufs[i]);
+
+	pt1_free_page(pt1, table->page, table->addr);
+}
+
+static int
+pt1_init_table(struct pt1 *pt1, struct pt1_table *table, u32 *pfnp)
+{
+	struct pt1_table_page *page;
+	dma_addr_t addr;
+	int i, ret;
+	u32 buf_pfn;
+
+	page = pt1_alloc_page(pt1, &addr, pfnp);
+	if (page == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < PT1_NR_BUFS; i++) {
+		ret = pt1_init_buffer(pt1, &table->bufs[i], &buf_pfn);
+		if (ret < 0)
+			goto err;
+
+		page->buf_pfns[i] = cpu_to_le32(buf_pfn);
+	}
+
+	pt1_increment_table_count(pt1);
+	table->page = page;
+	table->addr = addr;
+	return 0;
+
+err:
+	while (i--)
+		pt1_cleanup_buffer(pt1, &table->bufs[i]);
+
+	pt1_free_page(pt1, page, addr);
+	return ret;
+}
+
+static void pt1_cleanup_tables(struct pt1 *pt1)
+{
+	struct pt1_table *tables;
+	int i;
+
+	tables = pt1->tables;
+	pt1_unregister_tables(pt1);
+
+	for (i = 0; i < pt1_nr_tables; i++)
+		pt1_cleanup_table(pt1, &tables[i]);
+
+	vfree(tables);
+}
+
+static int pt1_init_tables(struct pt1 *pt1)
+{
+	struct pt1_table *tables;
+	int i, ret;
+	u32 first_pfn, pfn;
+
+	tables = vmalloc(sizeof(struct pt1_table) * pt1_nr_tables);
+	if (tables == NULL)
+		return -ENOMEM;
+
+	pt1_init_table_count(pt1);
+
+	i = 0;
+	if (pt1_nr_tables) {
+		ret = pt1_init_table(pt1, &tables[0], &first_pfn);
+		if (ret)
+			goto err;
+		i++;
+	}
+
+	while (i < pt1_nr_tables) {
+		ret = pt1_init_table(pt1, &tables[i], &pfn);
+		if (ret)
+			goto err;
+		tables[i - 1].page->next_pfn = cpu_to_le32(pfn);
+		i++;
+	}
+
+	tables[pt1_nr_tables - 1].page->next_pfn = cpu_to_le32(first_pfn);
+
+	pt1_register_tables(pt1, first_pfn);
+	pt1->tables = tables;
+	return 0;
+
+err:
+	while (i--)
+		pt1_cleanup_table(pt1, &tables[i]);
+
+	vfree(tables);
+	return ret;
+}
+
+static int pt1_start_feed(struct dvb_demux_feed *feed)
+{
+	struct pt1_adapter *adap;
+	adap = container_of(feed->demux, struct pt1_adapter, demux);
+	if (!adap->users++)
+		pt1_set_stream(adap->pt1, adap->index, 1);
+	return 0;
+}
+
+static int pt1_stop_feed(struct dvb_demux_feed *feed)
+{
+	struct pt1_adapter *adap;
+	adap = container_of(feed->demux, struct pt1_adapter, demux);
+	if (!--adap->users)
+		pt1_set_stream(adap->pt1, adap->index, 0);
+	return 0;
+}
+
+static void
+pt1_set_power(struct pt1 *pt1, int power, int lnb, int reset)
+{
+	pt1_write_reg(pt1, 1, power | lnb << 1 | !reset << 3);
+}
+
+static int pt1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+	struct pt1_adapter *adap;
+	int lnb;
+
+	adap = container_of(fe->dvb, struct pt1_adapter, adap);
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13: /* actually 11V */
+		lnb = 2;
+		break;
+	case SEC_VOLTAGE_18: /* actually 15V */
+		lnb = 3;
+		break;
+	case SEC_VOLTAGE_OFF:
+		lnb = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	pt1_set_power(adap->pt1, 1, lnb, 0);
+
+	if (adap->orig_set_voltage)
+		return adap->orig_set_voltage(fe, voltage);
+	else
+		return 0;
+}
+
+static void pt1_free_adapter(struct pt1_adapter *adap)
+{
+	dvb_unregister_frontend(adap->fe);
+	dvb_net_release(&adap->net);
+	adap->demux.dmx.close(&adap->demux.dmx);
+	dvb_dmxdev_release(&adap->dmxdev);
+	dvb_dmx_release(&adap->demux);
+	dvb_unregister_adapter(&adap->adap);
+	free_page((unsigned long)adap->buf);
+	kfree(adap);
+}
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static struct pt1_adapter *
+pt1_alloc_adapter(struct pt1 *pt1, struct dvb_frontend *fe)
+{
+	struct pt1_adapter *adap;
+	void *buf;
+	struct dvb_adapter *dvb_adap;
+	struct dvb_demux *demux;
+	struct dmxdev *dmxdev;
+	int ret;
+
+	adap = kzalloc(sizeof(struct pt1_adapter), GFP_KERNEL);
+	if (!adap) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	adap->pt1 = pt1;
+
+	adap->orig_set_voltage = fe->ops.set_voltage;
+	fe->ops.set_voltage = pt1_set_voltage;
+
+	buf = (u8 *)__get_free_page(GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto err_kfree;
+	}
+
+	adap->buf = buf;
+	adap->upacket_count = 0;
+	adap->packet_count = 0;
+
+	dvb_adap = &adap->adap;
+	dvb_adap->priv = adap;
+	ret = dvb_register_adapter(dvb_adap, DRIVER_NAME, THIS_MODULE,
+				   &pt1->pdev->dev, adapter_nr);
+	if (ret < 0)
+		goto err_free_page;
+
+	demux = &adap->demux;
+	demux->dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING;
+	demux->priv = adap;
+	demux->feednum = 256;
+	demux->filternum = 256;
+	demux->start_feed = pt1_start_feed;
+	demux->stop_feed = pt1_stop_feed;
+	demux->write_to_decoder = NULL;
+	ret = dvb_dmx_init(demux);
+	if (ret < 0)
+		goto err_unregister_adapter;
+
+	dmxdev = &adap->dmxdev;
+	dmxdev->filternum = 256;
+	dmxdev->demux = &demux->dmx;
+	dmxdev->capabilities = 0;
+	ret = dvb_dmxdev_init(dmxdev, dvb_adap);
+	if (ret < 0)
+		goto err_dmx_release;
+
+	dvb_net_init(dvb_adap, &adap->net, &demux->dmx);
+
+	ret = dvb_register_frontend(dvb_adap, fe);
+	if (ret < 0)
+		goto err_net_release;
+	adap->fe = fe;
+
+	return adap;
+
+err_net_release:
+	dvb_net_release(&adap->net);
+	adap->demux.dmx.close(&adap->demux.dmx);
+	dvb_dmxdev_release(&adap->dmxdev);
+err_dmx_release:
+	dvb_dmx_release(demux);
+err_unregister_adapter:
+	dvb_unregister_adapter(dvb_adap);
+err_free_page:
+	free_page((unsigned long)buf);
+err_kfree:
+	kfree(adap);
+err:
+	return ERR_PTR(ret);
+}
+
+static void pt1_cleanup_adapters(struct pt1 *pt1)
+{
+	int i;
+	for (i = 0; i < PT1_NR_ADAPS; i++)
+		pt1_free_adapter(pt1->adaps[i]);
+}
+
+struct pt1_config {
+	struct va1j5jf8007s_config va1j5jf8007s_config;
+	struct va1j5jf8007t_config va1j5jf8007t_config;
+};
+
+static const struct pt1_config pt1_configs[2] = {
+	{
+		{ .demod_address = 0x1b },
+		{ .demod_address = 0x1a },
+	}, {
+		{ .demod_address = 0x19 },
+		{ .demod_address = 0x18 },
+	},
+};
+
+static int pt1_init_adapters(struct pt1 *pt1)
+{
+	int i, j;
+	struct i2c_adapter *i2c_adap;
+	const struct pt1_config *config;
+	struct dvb_frontend *fe[4];
+	struct pt1_adapter *adap;
+	int ret;
+
+	i = 0;
+	j = 0;
+
+	i2c_adap = &pt1->i2c_adap;
+	do {
+		config = &pt1_configs[i / 2];
+
+		fe[i] = va1j5jf8007s_attach(&config->va1j5jf8007s_config,
+					    i2c_adap);
+		if (!fe[i]) {
+			ret = -ENODEV; /* This does not sound nice... */
+			goto err;
+		}
+		i++;
+
+		fe[i] = va1j5jf8007t_attach(&config->va1j5jf8007t_config,
+					    i2c_adap);
+		if (!fe[i]) {
+			ret = -ENODEV;
+			goto err;
+		}
+		i++;
+
+		ret = va1j5jf8007s_prepare(fe[i - 2]);
+		if (ret < 0)
+			goto err;
+
+		ret = va1j5jf8007t_prepare(fe[i - 1]);
+		if (ret < 0)
+			goto err;
+
+	} while (i < 4);
+
+	do {
+		adap = pt1_alloc_adapter(pt1, fe[j]);
+		if (IS_ERR(adap))
+			goto err;
+		adap->index = j;
+		pt1->adaps[j] = adap;
+	} while (++j < 4);
+
+	return 0;
+
+err:
+	while (i-- > j)
+		fe[i]->ops.release(fe[i]);
+
+	while (j--)
+		pt1_free_adapter(pt1->adaps[j]);
+
+	return ret;
+}
+
+static void pt1_i2c_emit(struct pt1 *pt1, int addr, int busy, int read_enable,
+			 int clock, int data, int next_addr)
+{
+	pt1_write_reg(pt1, 4, addr << 18 | busy << 13 | read_enable << 12 |
+		      !clock << 11 | !data << 10 | next_addr);
+}
+
+static void pt1_i2c_write_bit(struct pt1 *pt1, int addr, int *addrp, int data)
+{
+	pt1_i2c_emit(pt1, addr,     1, 0, 0, data, addr + 1);
+	pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, data, addr + 2);
+	pt1_i2c_emit(pt1, addr + 2, 1, 0, 0, data, addr + 3);
+	*addrp = addr + 3;
+}
+
+static void pt1_i2c_read_bit(struct pt1 *pt1, int addr, int *addrp)
+{
+	pt1_i2c_emit(pt1, addr,     1, 0, 0, 1, addr + 1);
+	pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 1, addr + 2);
+	pt1_i2c_emit(pt1, addr + 2, 1, 1, 1, 1, addr + 3);
+	pt1_i2c_emit(pt1, addr + 3, 1, 0, 0, 1, addr + 4);
+	*addrp = addr + 4;
+}
+
+static void pt1_i2c_write_byte(struct pt1 *pt1, int addr, int *addrp, int data)
+{
+	int i;
+	for (i = 0; i < 8; i++)
+		pt1_i2c_write_bit(pt1, addr, &addr, data >> (7 - i) & 1);
+	pt1_i2c_write_bit(pt1, addr, &addr, 1);
+	*addrp = addr;
+}
+
+static void pt1_i2c_read_byte(struct pt1 *pt1, int addr, int *addrp, int last)
+{
+	int i;
+	for (i = 0; i < 8; i++)
+		pt1_i2c_read_bit(pt1, addr, &addr);
+	pt1_i2c_write_bit(pt1, addr, &addr, last);
+	*addrp = addr;
+}
+
+static void pt1_i2c_prepare(struct pt1 *pt1, int addr, int *addrp)
+{
+	pt1_i2c_emit(pt1, addr,     1, 0, 1, 1, addr + 1);
+	pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2);
+	pt1_i2c_emit(pt1, addr + 2, 1, 0, 0, 0, addr + 3);
+	*addrp = addr + 3;
+}
+
+static void
+pt1_i2c_write_msg(struct pt1 *pt1, int addr, int *addrp, struct i2c_msg *msg)
+{
+	int i;
+	pt1_i2c_prepare(pt1, addr, &addr);
+	pt1_i2c_write_byte(pt1, addr, &addr, msg->addr << 1);
+	for (i = 0; i < msg->len; i++)
+		pt1_i2c_write_byte(pt1, addr, &addr, msg->buf[i]);
+	*addrp = addr;
+}
+
+static void
+pt1_i2c_read_msg(struct pt1 *pt1, int addr, int *addrp, struct i2c_msg *msg)
+{
+	int i;
+	pt1_i2c_prepare(pt1, addr, &addr);
+	pt1_i2c_write_byte(pt1, addr, &addr, msg->addr << 1 | 1);
+	for (i = 0; i < msg->len; i++)
+		pt1_i2c_read_byte(pt1, addr, &addr, i == msg->len - 1);
+	*addrp = addr;
+}
+
+static int pt1_i2c_end(struct pt1 *pt1, int addr)
+{
+	pt1_i2c_emit(pt1, addr,     1, 0, 0, 0, addr + 1);
+	pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2);
+	pt1_i2c_emit(pt1, addr + 2, 1, 0, 1, 1, 0);
+
+	pt1_write_reg(pt1, 0, 0x00000004);
+	do {
+		if (signal_pending(current))
+			return -EINTR;
+		schedule_timeout_interruptible((HZ + 999) / 1000);
+	} while (pt1_read_reg(pt1, 0) & 0x00000080);
+	return 0;
+}
+
+static void pt1_i2c_begin(struct pt1 *pt1, int *addrp)
+{
+	int addr;
+	addr = 0;
+
+	pt1_i2c_emit(pt1, addr,     0, 0, 1, 1, addr /* itself */);
+	addr = addr + 1;
+
+	if (!pt1->i2c_running) {
+		pt1_i2c_emit(pt1, addr,     1, 0, 1, 1, addr + 1);
+		pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2);
+		addr = addr + 2;
+		pt1->i2c_running = 1;
+	}
+	*addrp = addr;
+}
+
+static int pt1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct pt1 *pt1;
+	int i;
+	struct i2c_msg *msg, *next_msg;
+	int addr, ret;
+	u16 len;
+	u32 word;
+
+	pt1 = i2c_get_adapdata(adap);
+
+	for (i = 0; i < num; i++) {
+		msg = &msgs[i];
+		if (msg->flags & I2C_M_RD)
+			return -ENOTSUPP;
+
+		if (i + 1 < num)
+			next_msg = &msgs[i + 1];
+		else
+			next_msg = NULL;
+
+		if (next_msg && next_msg->flags & I2C_M_RD) {
+			i++;
+
+			len = next_msg->len;
+			if (len > 4)
+				return -ENOTSUPP;
+
+			pt1_i2c_begin(pt1, &addr);
+			pt1_i2c_write_msg(pt1, addr, &addr, msg);
+			pt1_i2c_read_msg(pt1, addr, &addr, next_msg);
+			ret = pt1_i2c_end(pt1, addr);
+			if (ret < 0)
+				return ret;
+
+			word = pt1_read_reg(pt1, 2);
+			while (len--) {
+				next_msg->buf[len] = word;
+				word >>= 8;
+			}
+		} else {
+			pt1_i2c_begin(pt1, &addr);
+			pt1_i2c_write_msg(pt1, addr, &addr, msg);
+			ret = pt1_i2c_end(pt1, addr);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	return num;
+}
+
+static u32 pt1_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C;
+}
+
+static const struct i2c_algorithm pt1_i2c_algo = {
+	.master_xfer = pt1_i2c_xfer,
+	.functionality = pt1_i2c_func,
+};
+
+static void pt1_i2c_wait(struct pt1 *pt1)
+{
+	int i;
+	for (i = 0; i < 128; i++)
+		pt1_i2c_emit(pt1, 0, 0, 0, 1, 1, 0);
+}
+
+static void pt1_i2c_init(struct pt1 *pt1)
+{
+	int i;
+	for (i = 0; i < 1024; i++)
+		pt1_i2c_emit(pt1, i, 0, 0, 1, 1, 0);
+}
+
+static void __devexit pt1_remove(struct pci_dev *pdev)
+{
+	struct pt1 *pt1;
+	void __iomem *regs;
+
+	pt1 = pci_get_drvdata(pdev);
+	regs = pt1->regs;
+
+	kthread_stop(pt1->kthread);
+	pt1_cleanup_tables(pt1);
+	pt1_cleanup_adapters(pt1);
+	pt1_disable_ram(pt1);
+	pt1_set_power(pt1, 0, 0, 1);
+	i2c_del_adapter(&pt1->i2c_adap);
+	pci_set_drvdata(pdev, NULL);
+	kfree(pt1);
+	pci_iounmap(pdev, regs);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static int __devinit
+pt1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int ret;
+	void __iomem *regs;
+	struct pt1 *pt1;
+	struct i2c_adapter *i2c_adap;
+	struct task_struct *kthread;
+
+	ret = pci_enable_device(pdev);
+	if (ret < 0)
+		goto err;
+
+	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (ret < 0)
+		goto err_pci_disable_device;
+
+	pci_set_master(pdev);
+
+	ret = pci_request_regions(pdev, DRIVER_NAME);
+	if (ret < 0)
+		goto err_pci_disable_device;
+
+	regs = pci_iomap(pdev, 0, 0);
+	if (!regs) {
+		ret = -EIO;
+		goto err_pci_release_regions;
+	}
+
+	pt1 = kzalloc(sizeof(struct pt1), GFP_KERNEL);
+	if (!pt1) {
+		ret = -ENOMEM;
+		goto err_pci_iounmap;
+	}
+
+	pt1->pdev = pdev;
+	pt1->regs = regs;
+	pci_set_drvdata(pdev, pt1);
+
+	i2c_adap = &pt1->i2c_adap;
+	i2c_adap->class = I2C_CLASS_TV_DIGITAL;
+	i2c_adap->algo = &pt1_i2c_algo;
+	i2c_adap->algo_data = NULL;
+	i2c_adap->dev.parent = &pdev->dev;
+	i2c_set_adapdata(i2c_adap, pt1);
+	ret = i2c_add_adapter(i2c_adap);
+	if (ret < 0)
+		goto err_kfree;
+
+	pt1_set_power(pt1, 0, 0, 1);
+
+	pt1_i2c_init(pt1);
+	pt1_i2c_wait(pt1);
+
+	ret = pt1_sync(pt1);
+	if (ret < 0)
+		goto err_i2c_del_adapter;
+
+	pt1_identify(pt1);
+
+	ret = pt1_unlock(pt1);
+	if (ret < 0)
+		goto err_i2c_del_adapter;
+
+	ret = pt1_reset_pci(pt1);
+	if (ret < 0)
+		goto err_i2c_del_adapter;
+
+	ret = pt1_reset_ram(pt1);
+	if (ret < 0)
+		goto err_i2c_del_adapter;
+
+	ret = pt1_enable_ram(pt1);
+	if (ret < 0)
+		goto err_i2c_del_adapter;
+
+	pt1_init_streams(pt1);
+
+	pt1_set_power(pt1, 1, 0, 1);
+	schedule_timeout_uninterruptible((HZ + 49) / 50);
+
+	pt1_set_power(pt1, 1, 0, 0);
+	schedule_timeout_uninterruptible((HZ + 999) / 1000);
+
+	ret = pt1_init_adapters(pt1);
+	if (ret < 0)
+		goto err_pt1_disable_ram;
+
+	ret = pt1_init_tables(pt1);
+	if (ret < 0)
+		goto err_pt1_cleanup_adapters;
+
+	kthread = kthread_run(pt1_thread, pt1, "pt1");
+	if (IS_ERR(kthread)) {
+		ret = PTR_ERR(kthread);
+		goto err_pt1_cleanup_tables;
+	}
+
+	pt1->kthread = kthread;
+	return 0;
+
+err_pt1_cleanup_tables:
+	pt1_cleanup_tables(pt1);
+err_pt1_cleanup_adapters:
+	pt1_cleanup_adapters(pt1);
+err_pt1_disable_ram:
+	pt1_disable_ram(pt1);
+	pt1_set_power(pt1, 0, 0, 1);
+err_i2c_del_adapter:
+	i2c_del_adapter(i2c_adap);
+err_kfree:
+	pci_set_drvdata(pdev, NULL);
+	kfree(pt1);
+err_pci_iounmap:
+	pci_iounmap(pdev, regs);
+err_pci_release_regions:
+	pci_release_regions(pdev);
+err_pci_disable_device:
+	pci_disable_device(pdev);
+err:
+	return ret;
+
+}
+
+static struct pci_device_id pt1_id_table[] = {
+	{ PCI_DEVICE(0x10ee, 0x211a) },
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, pt1_id_table);
+
+static struct pci_driver pt1_driver = {
+	.name		= DRIVER_NAME,
+	.probe		= pt1_probe,
+	.remove		= __devexit_p(pt1_remove),
+	.id_table	= pt1_id_table,
+};
+
+
+static int __init pt1_init(void)
+{
+	return pci_register_driver(&pt1_driver);
+}
+
+
+static void __exit pt1_cleanup(void)
+{
+	pci_unregister_driver(&pt1_driver);
+}
+
+module_init(pt1_init);
+module_exit(pt1_cleanup);
+
+MODULE_AUTHOR("Takahito HIRANO <hiranotaka@zng.info>");
+MODULE_DESCRIPTION("Earthsoft PT1 Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/pt1/va1j5jf8007s.c b/drivers/media/dvb/pt1/va1j5jf8007s.c
new file mode 100644
index 000000000000..2db940f8635f
--- /dev/null
+++ b/drivers/media/dvb/pt1/va1j5jf8007s.c
@@ -0,0 +1,658 @@
+/*
+ * ISDB-S driver for VA1J5JF8007
+ *
+ * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
+ *
+ * based on pt1dvr - http://pt1dvr.sourceforge.jp/
+ * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+#include "va1j5jf8007s.h"
+
+enum va1j5jf8007s_tune_state {
+	VA1J5JF8007S_IDLE,
+	VA1J5JF8007S_SET_FREQUENCY_1,
+	VA1J5JF8007S_SET_FREQUENCY_2,
+	VA1J5JF8007S_SET_FREQUENCY_3,
+	VA1J5JF8007S_CHECK_FREQUENCY,
+	VA1J5JF8007S_SET_MODULATION,
+	VA1J5JF8007S_CHECK_MODULATION,
+	VA1J5JF8007S_SET_TS_ID,
+	VA1J5JF8007S_CHECK_TS_ID,
+	VA1J5JF8007S_TRACK,
+};
+
+struct va1j5jf8007s_state {
+	const struct va1j5jf8007s_config *config;
+	struct i2c_adapter *adap;
+	struct dvb_frontend fe;
+	enum va1j5jf8007s_tune_state tune_state;
+};
+
+static int va1j5jf8007s_get_frontend_algo(struct dvb_frontend *fe)
+{
+	return DVBFE_ALGO_HW;
+}
+
+static int
+va1j5jf8007s_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct va1j5jf8007s_state *state;
+
+	state = fe->demodulator_priv;
+
+	switch (state->tune_state) {
+	case VA1J5JF8007S_IDLE:
+	case VA1J5JF8007S_SET_FREQUENCY_1:
+	case VA1J5JF8007S_SET_FREQUENCY_2:
+	case VA1J5JF8007S_SET_FREQUENCY_3:
+	case VA1J5JF8007S_CHECK_FREQUENCY:
+		*status = 0;
+		return 0;
+
+
+	case VA1J5JF8007S_SET_MODULATION:
+	case VA1J5JF8007S_CHECK_MODULATION:
+		*status |= FE_HAS_SIGNAL;
+		return 0;
+
+	case VA1J5JF8007S_SET_TS_ID:
+	case VA1J5JF8007S_CHECK_TS_ID:
+		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
+		return 0;
+
+	case VA1J5JF8007S_TRACK:
+		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK;
+		return 0;
+	}
+
+	BUG();
+}
+
+struct va1j5jf8007s_cb_map {
+	u32 frequency;
+	u8 cb;
+};
+
+static const struct va1j5jf8007s_cb_map va1j5jf8007s_cb_maps[] = {
+	{  986000, 0xb2 },
+	{ 1072000, 0xd2 },
+	{ 1154000, 0xe2 },
+	{ 1291000, 0x20 },
+	{ 1447000, 0x40 },
+	{ 1615000, 0x60 },
+	{ 1791000, 0x80 },
+	{ 1972000, 0xa0 },
+};
+
+static u8 va1j5jf8007s_lookup_cb(u32 frequency)
+{
+	int i;
+	const struct va1j5jf8007s_cb_map *map;
+
+	for (i = 0; i < ARRAY_SIZE(va1j5jf8007s_cb_maps); i++) {
+		map = &va1j5jf8007s_cb_maps[i];
+		if (frequency < map->frequency)
+			return map->cb;
+	}
+	return 0xc0;
+}
+
+static int va1j5jf8007s_set_frequency_1(struct va1j5jf8007s_state *state)
+{
+	u32 frequency;
+	u16 word;
+	u8 buf[6];
+	struct i2c_msg msg;
+
+	frequency = state->fe.dtv_property_cache.frequency;
+
+	word = (frequency + 500) / 1000;
+	if (frequency < 1072000)
+		word = (word << 1 & ~0x1f) | (word & 0x0f);
+
+	buf[0] = 0xfe;
+	buf[1] = 0xc0;
+	buf[2] = 0x40 | word >> 8;
+	buf[3] = word;
+	buf[4] = 0xe0;
+	buf[5] = va1j5jf8007s_lookup_cb(frequency);
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007s_set_frequency_2(struct va1j5jf8007s_state *state)
+{
+	u8 buf[3];
+	struct i2c_msg msg;
+
+	buf[0] = 0xfe;
+	buf[1] = 0xc0;
+	buf[2] = 0xe4;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007s_set_frequency_3(struct va1j5jf8007s_state *state)
+{
+	u32 frequency;
+	u8 buf[4];
+	struct i2c_msg msg;
+
+	frequency = state->fe.dtv_property_cache.frequency;
+
+	buf[0] = 0xfe;
+	buf[1] = 0xc0;
+	buf[2] = 0xf4;
+	buf[3] = va1j5jf8007s_lookup_cb(frequency) | 0x4;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int
+va1j5jf8007s_check_frequency(struct va1j5jf8007s_state *state, int *lock)
+{
+	u8 addr;
+	u8 write_buf[2], read_buf[1];
+	struct i2c_msg msgs[2];
+
+	addr = state->config->demod_address;
+
+	write_buf[0] = 0xfe;
+	write_buf[1] = 0xc1;
+
+	msgs[0].addr = addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(write_buf);
+	msgs[0].buf = write_buf;
+
+	msgs[1].addr = addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(read_buf);
+	msgs[1].buf = read_buf;
+
+	if (i2c_transfer(state->adap, msgs, 2) != 2)
+		return -EREMOTEIO;
+
+	*lock = read_buf[0] & 0x40;
+	return 0;
+}
+
+static int va1j5jf8007s_set_modulation(struct va1j5jf8007s_state *state)
+{
+	u8 buf[2];
+	struct i2c_msg msg;
+
+	buf[0] = 0x03;
+	buf[1] = 0x01;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int
+va1j5jf8007s_check_modulation(struct va1j5jf8007s_state *state, int *lock)
+{
+	u8 addr;
+	u8 write_buf[1], read_buf[1];
+	struct i2c_msg msgs[2];
+
+	addr = state->config->demod_address;
+
+	write_buf[0] = 0xc3;
+
+	msgs[0].addr = addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(write_buf);
+	msgs[0].buf = write_buf;
+
+	msgs[1].addr = addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(read_buf);
+	msgs[1].buf = read_buf;
+
+	if (i2c_transfer(state->adap, msgs, 2) != 2)
+		return -EREMOTEIO;
+
+	*lock = !(read_buf[0] & 0x10);
+	return 0;
+}
+
+static int
+va1j5jf8007s_set_ts_id(struct va1j5jf8007s_state *state)
+{
+	u32 ts_id;
+	u8 buf[3];
+	struct i2c_msg msg;
+
+	ts_id = state->fe.dtv_property_cache.isdbs_ts_id;
+	if (!ts_id)
+		return 0;
+
+	buf[0] = 0x8f;
+	buf[1] = ts_id >> 8;
+	buf[2] = ts_id;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int
+va1j5jf8007s_check_ts_id(struct va1j5jf8007s_state *state, int *lock)
+{
+	u8 addr;
+	u8 write_buf[1], read_buf[2];
+	struct i2c_msg msgs[2];
+	u32 ts_id;
+
+	ts_id = state->fe.dtv_property_cache.isdbs_ts_id;
+	if (!ts_id) {
+		*lock = 1;
+		return 0;
+	}
+
+	addr = state->config->demod_address;
+
+	write_buf[0] = 0xe6;
+
+	msgs[0].addr = addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(write_buf);
+	msgs[0].buf = write_buf;
+
+	msgs[1].addr = addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(read_buf);
+	msgs[1].buf = read_buf;
+
+	if (i2c_transfer(state->adap, msgs, 2) != 2)
+		return -EREMOTEIO;
+
+	*lock = (read_buf[0] << 8 | read_buf[1]) == ts_id;
+	return 0;
+}
+
+static int
+va1j5jf8007s_tune(struct dvb_frontend *fe,
+		  struct dvb_frontend_parameters *params,
+		  unsigned int mode_flags,  unsigned int *delay,
+		  fe_status_t *status)
+{
+	struct va1j5jf8007s_state *state;
+	int ret;
+	int lock;
+
+	state = fe->demodulator_priv;
+
+	if (params != NULL)
+		state->tune_state = VA1J5JF8007S_SET_FREQUENCY_1;
+
+	switch (state->tune_state) {
+	case VA1J5JF8007S_IDLE:
+		*delay = 3 * HZ;
+		*status = 0;
+		return 0;
+
+	case VA1J5JF8007S_SET_FREQUENCY_1:
+		ret = va1j5jf8007s_set_frequency_1(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007S_SET_FREQUENCY_2;
+		*delay = 0;
+		*status = 0;
+		return 0;
+
+	case VA1J5JF8007S_SET_FREQUENCY_2:
+		ret = va1j5jf8007s_set_frequency_2(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007S_SET_FREQUENCY_3;
+		*delay = (HZ + 99) / 100;
+		*status = 0;
+		return 0;
+
+	case VA1J5JF8007S_SET_FREQUENCY_3:
+		ret = va1j5jf8007s_set_frequency_3(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007S_CHECK_FREQUENCY;
+		*delay = 0;
+		*status = 0;
+		return 0;
+
+	case VA1J5JF8007S_CHECK_FREQUENCY:
+		ret = va1j5jf8007s_check_frequency(state, &lock);
+		if (ret < 0)
+			return ret;
+
+		if (!lock)  {
+			*delay = (HZ + 999) / 1000;
+			*status = 0;
+			return 0;
+		}
+
+		state->tune_state = VA1J5JF8007S_SET_MODULATION;
+		*delay = 0;
+		*status = FE_HAS_SIGNAL;
+		return 0;
+
+	case VA1J5JF8007S_SET_MODULATION:
+		ret = va1j5jf8007s_set_modulation(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007S_CHECK_MODULATION;
+		*delay = 0;
+		*status = FE_HAS_SIGNAL;
+		return 0;
+
+	case VA1J5JF8007S_CHECK_MODULATION:
+		ret = va1j5jf8007s_check_modulation(state, &lock);
+		if (ret < 0)
+			return ret;
+
+		if (!lock)  {
+			*delay = (HZ + 49) / 50;
+			*status = FE_HAS_SIGNAL;
+			return 0;
+		}
+
+		state->tune_state = VA1J5JF8007S_SET_TS_ID;
+		*delay = 0;
+		*status = FE_HAS_SIGNAL | FE_HAS_CARRIER;
+		return 0;
+
+	case VA1J5JF8007S_SET_TS_ID:
+		ret = va1j5jf8007s_set_ts_id(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007S_CHECK_TS_ID;
+		return 0;
+
+	case VA1J5JF8007S_CHECK_TS_ID:
+		ret = va1j5jf8007s_check_ts_id(state, &lock);
+		if (ret < 0)
+			return ret;
+
+		if (!lock)  {
+			*delay = (HZ + 99) / 100;
+			*status = FE_HAS_SIGNAL | FE_HAS_CARRIER;
+			return 0;
+		}
+
+		state->tune_state = VA1J5JF8007S_TRACK;
+		/* fall through */
+
+	case VA1J5JF8007S_TRACK:
+		*delay = 3 * HZ;
+		*status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK;
+		return 0;
+	}
+
+	BUG();
+}
+
+static int va1j5jf8007s_init_frequency(struct va1j5jf8007s_state *state)
+{
+	u8 buf[4];
+	struct i2c_msg msg;
+
+	buf[0] = 0xfe;
+	buf[1] = 0xc0;
+	buf[2] = 0xf0;
+	buf[3] = 0x04;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007s_set_sleep(struct va1j5jf8007s_state *state, int sleep)
+{
+	u8 buf[2];
+	struct i2c_msg msg;
+
+	buf[0] = 0x17;
+	buf[1] = sleep ? 0x01 : 0x00;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007s_sleep(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007s_state *state;
+	int ret;
+
+	state = fe->demodulator_priv;
+
+	ret = va1j5jf8007s_init_frequency(state);
+	if (ret < 0)
+		return ret;
+
+	return va1j5jf8007s_set_sleep(state, 1);
+}
+
+static int va1j5jf8007s_init(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007s_state *state;
+
+	state = fe->demodulator_priv;
+	state->tune_state = VA1J5JF8007S_IDLE;
+
+	return va1j5jf8007s_set_sleep(state, 0);
+}
+
+static void va1j5jf8007s_release(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007s_state *state;
+	state = fe->demodulator_priv;
+	kfree(state);
+}
+
+static struct dvb_frontend_ops va1j5jf8007s_ops = {
+	.info = {
+		.name = "VA1J5JF8007 ISDB-S",
+		.type = FE_QPSK,
+		.frequency_min = 950000,
+		.frequency_max = 2150000,
+		.frequency_stepsize = 1000,
+		.caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO |
+			FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.get_frontend_algo = va1j5jf8007s_get_frontend_algo,
+	.read_status = va1j5jf8007s_read_status,
+	.tune = va1j5jf8007s_tune,
+	.sleep = va1j5jf8007s_sleep,
+	.init = va1j5jf8007s_init,
+	.release = va1j5jf8007s_release,
+};
+
+static int va1j5jf8007s_prepare_1(struct va1j5jf8007s_state *state)
+{
+	u8 addr;
+	u8 write_buf[1], read_buf[1];
+	struct i2c_msg msgs[2];
+
+	addr = state->config->demod_address;
+
+	write_buf[0] = 0x07;
+
+	msgs[0].addr = addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(write_buf);
+	msgs[0].buf = write_buf;
+
+	msgs[1].addr = addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(read_buf);
+	msgs[1].buf = read_buf;
+
+	if (i2c_transfer(state->adap, msgs, 2) != 2)
+		return -EREMOTEIO;
+
+	if (read_buf[0] != 0x41)
+		return -EIO;
+
+	return 0;
+}
+
+static const u8 va1j5jf8007s_prepare_bufs[][2] = {
+	{0x04, 0x02}, {0x0d, 0x55}, {0x11, 0x40}, {0x13, 0x80}, {0x17, 0x01},
+	{0x1c, 0x0a}, {0x1d, 0xaa}, {0x1e, 0x20}, {0x1f, 0x88}, {0x51, 0xb0},
+	{0x52, 0x89}, {0x53, 0xb3}, {0x5a, 0x2d}, {0x5b, 0xd3}, {0x85, 0x69},
+	{0x87, 0x04}, {0x8e, 0x02}, {0xa3, 0xf7}, {0xa5, 0xc0},
+};
+
+static int va1j5jf8007s_prepare_2(struct va1j5jf8007s_state *state)
+{
+	u8 addr;
+	u8 buf[2];
+	struct i2c_msg msg;
+	int i;
+
+	addr = state->config->demod_address;
+
+	msg.addr = addr;
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = buf;
+	for (i = 0; i < ARRAY_SIZE(va1j5jf8007s_prepare_bufs); i++) {
+		memcpy(buf, va1j5jf8007s_prepare_bufs[i], sizeof(buf));
+		if (i2c_transfer(state->adap, &msg, 1) != 1)
+			return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+/* must be called after va1j5jf8007t_attach */
+int va1j5jf8007s_prepare(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007s_state *state;
+	int ret;
+
+	state = fe->demodulator_priv;
+
+	ret = va1j5jf8007s_prepare_1(state);
+	if (ret < 0)
+		return ret;
+
+	ret = va1j5jf8007s_prepare_2(state);
+	if (ret < 0)
+		return ret;
+
+	return va1j5jf8007s_init_frequency(state);
+}
+
+struct dvb_frontend *
+va1j5jf8007s_attach(const struct va1j5jf8007s_config *config,
+		    struct i2c_adapter *adap)
+{
+	struct va1j5jf8007s_state *state;
+	struct dvb_frontend *fe;
+	u8 buf[2];
+	struct i2c_msg msg;
+
+	state = kzalloc(sizeof(struct va1j5jf8007s_state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	state->config = config;
+	state->adap = adap;
+
+	fe = &state->fe;
+	memcpy(&fe->ops, &va1j5jf8007s_ops, sizeof(struct dvb_frontend_ops));
+	fe->demodulator_priv = state;
+
+	buf[0] = 0x01;
+	buf[1] = 0x80;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1) {
+		kfree(state);
+		return NULL;
+	}
+
+	return fe;
+}
diff --git a/drivers/media/dvb/pt1/va1j5jf8007s.h b/drivers/media/dvb/pt1/va1j5jf8007s.h
new file mode 100644
index 000000000000..aa228a816353
--- /dev/null
+++ b/drivers/media/dvb/pt1/va1j5jf8007s.h
@@ -0,0 +1,40 @@
+/*
+ * ISDB-S driver for VA1J5JF8007
+ *
+ * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
+ *
+ * based on pt1dvr - http://pt1dvr.sourceforge.jp/
+ * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef VA1J5JF8007S_H
+#define VA1J5JF8007S_H
+
+struct va1j5jf8007s_config {
+	u8 demod_address;
+};
+
+struct i2c_adapter;
+
+struct dvb_frontend *
+va1j5jf8007s_attach(const struct va1j5jf8007s_config *config,
+		    struct i2c_adapter *adap);
+
+/* must be called after va1j5jf8007t_attach */
+int va1j5jf8007s_prepare(struct dvb_frontend *fe);
+
+#endif
diff --git a/drivers/media/dvb/pt1/va1j5jf8007t.c b/drivers/media/dvb/pt1/va1j5jf8007t.c
new file mode 100644
index 000000000000..71117f4ca7e6
--- /dev/null
+++ b/drivers/media/dvb/pt1/va1j5jf8007t.c
@@ -0,0 +1,468 @@
+/*
+ * ISDB-T driver for VA1J5JF8007
+ *
+ * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
+ *
+ * based on pt1dvr - http://pt1dvr.sourceforge.jp/
+ * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+#include "dvb_math.h"
+#include "va1j5jf8007t.h"
+
+enum va1j5jf8007t_tune_state {
+	VA1J5JF8007T_IDLE,
+	VA1J5JF8007T_SET_FREQUENCY,
+	VA1J5JF8007T_CHECK_FREQUENCY,
+	VA1J5JF8007T_SET_MODULATION,
+	VA1J5JF8007T_CHECK_MODULATION,
+	VA1J5JF8007T_TRACK,
+	VA1J5JF8007T_ABORT,
+};
+
+struct va1j5jf8007t_state {
+	const struct va1j5jf8007t_config *config;
+	struct i2c_adapter *adap;
+	struct dvb_frontend fe;
+	enum va1j5jf8007t_tune_state tune_state;
+};
+
+static int va1j5jf8007t_get_frontend_algo(struct dvb_frontend *fe)
+{
+	return DVBFE_ALGO_HW;
+}
+
+static int
+va1j5jf8007t_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct va1j5jf8007t_state *state;
+
+	state = fe->demodulator_priv;
+
+	switch (state->tune_state) {
+	case VA1J5JF8007T_IDLE:
+	case VA1J5JF8007T_SET_FREQUENCY:
+	case VA1J5JF8007T_CHECK_FREQUENCY:
+		*status = 0;
+		return 0;
+
+
+	case VA1J5JF8007T_SET_MODULATION:
+	case VA1J5JF8007T_CHECK_MODULATION:
+	case VA1J5JF8007T_ABORT:
+		*status |= FE_HAS_SIGNAL;
+		return 0;
+
+	case VA1J5JF8007T_TRACK:
+		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK;
+		return 0;
+	}
+
+	BUG();
+}
+
+struct va1j5jf8007t_cb_map {
+	u32 frequency;
+	u8 cb;
+};
+
+static const struct va1j5jf8007t_cb_map va1j5jf8007t_cb_maps[] = {
+	{  90000000, 0x80 },
+	{ 140000000, 0x81 },
+	{ 170000000, 0xa1 },
+	{ 220000000, 0x62 },
+	{ 330000000, 0xa2 },
+	{ 402000000, 0xe2 },
+	{ 450000000, 0x64 },
+	{ 550000000, 0x84 },
+	{ 600000000, 0xa4 },
+	{ 700000000, 0xc4 },
+};
+
+static u8 va1j5jf8007t_lookup_cb(u32 frequency)
+{
+	int i;
+	const struct va1j5jf8007t_cb_map *map;
+
+	for (i = 0; i < ARRAY_SIZE(va1j5jf8007t_cb_maps); i++) {
+		map = &va1j5jf8007t_cb_maps[i];
+		if (frequency < map->frequency)
+			return map->cb;
+	}
+	return 0xe4;
+}
+
+static int va1j5jf8007t_set_frequency(struct va1j5jf8007t_state *state)
+{
+	u32 frequency;
+	u16 word;
+	u8 buf[6];
+	struct i2c_msg msg;
+
+	frequency = state->fe.dtv_property_cache.frequency;
+
+	word = (frequency + 71428) / 142857 + 399;
+	buf[0] = 0xfe;
+	buf[1] = 0xc2;
+	buf[2] = word >> 8;
+	buf[3] = word;
+	buf[4] = 0x80;
+	buf[5] = va1j5jf8007t_lookup_cb(frequency);
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int
+va1j5jf8007t_check_frequency(struct va1j5jf8007t_state *state, int *lock)
+{
+	u8 addr;
+	u8 write_buf[2], read_buf[1];
+	struct i2c_msg msgs[2];
+
+	addr = state->config->demod_address;
+
+	write_buf[0] = 0xfe;
+	write_buf[1] = 0xc3;
+
+	msgs[0].addr = addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(write_buf);
+	msgs[0].buf = write_buf;
+
+	msgs[1].addr = addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(read_buf);
+	msgs[1].buf = read_buf;
+
+	if (i2c_transfer(state->adap, msgs, 2) != 2)
+		return -EREMOTEIO;
+
+	*lock = read_buf[0] & 0x40;
+	return 0;
+}
+
+static int va1j5jf8007t_set_modulation(struct va1j5jf8007t_state *state)
+{
+	u8 buf[2];
+	struct i2c_msg msg;
+
+	buf[0] = 0x01;
+	buf[1] = 0x40;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007t_check_modulation(struct va1j5jf8007t_state *state,
+					 int *lock, int *retry)
+{
+	u8 addr;
+	u8 write_buf[1], read_buf[1];
+	struct i2c_msg msgs[2];
+
+	addr = state->config->demod_address;
+
+	write_buf[0] = 0x80;
+
+	msgs[0].addr = addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(write_buf);
+	msgs[0].buf = write_buf;
+
+	msgs[1].addr = addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(read_buf);
+	msgs[1].buf = read_buf;
+
+	if (i2c_transfer(state->adap, msgs, 2) != 2)
+		return -EREMOTEIO;
+
+	*lock = !(read_buf[0] & 0x10);
+	*retry = read_buf[0] & 0x80;
+	return 0;
+}
+
+static int
+va1j5jf8007t_tune(struct dvb_frontend *fe,
+		  struct dvb_frontend_parameters *params,
+		  unsigned int mode_flags,  unsigned int *delay,
+		  fe_status_t *status)
+{
+	struct va1j5jf8007t_state *state;
+	int ret;
+	int lock, retry;
+
+	state = fe->demodulator_priv;
+
+	if (params != NULL)
+		state->tune_state = VA1J5JF8007T_SET_FREQUENCY;
+
+	switch (state->tune_state) {
+	case VA1J5JF8007T_IDLE:
+		*delay = 3 * HZ;
+		*status = 0;
+		return 0;
+
+	case VA1J5JF8007T_SET_FREQUENCY:
+		ret = va1j5jf8007t_set_frequency(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007T_CHECK_FREQUENCY;
+		*delay = 0;
+		*status = 0;
+		return 0;
+
+	case VA1J5JF8007T_CHECK_FREQUENCY:
+		ret = va1j5jf8007t_check_frequency(state, &lock);
+		if (ret < 0)
+			return ret;
+
+		if (!lock)  {
+			*delay = (HZ + 999) / 1000;
+			*status = 0;
+			return 0;
+		}
+
+		state->tune_state = VA1J5JF8007T_SET_MODULATION;
+		*delay = 0;
+		*status = FE_HAS_SIGNAL;
+		return 0;
+
+	case VA1J5JF8007T_SET_MODULATION:
+		ret = va1j5jf8007t_set_modulation(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007T_CHECK_MODULATION;
+		*delay = 0;
+		*status = FE_HAS_SIGNAL;
+		return 0;
+
+	case VA1J5JF8007T_CHECK_MODULATION:
+		ret = va1j5jf8007t_check_modulation(state, &lock, &retry);
+		if (ret < 0)
+			return ret;
+
+		if (!lock)  {
+			if (!retry)  {
+				state->tune_state = VA1J5JF8007T_ABORT;
+				*delay = 3 * HZ;
+				*status = FE_HAS_SIGNAL;
+				return 0;
+			}
+			*delay = (HZ + 999) / 1000;
+			*status = FE_HAS_SIGNAL;
+			return 0;
+		}
+
+		state->tune_state = VA1J5JF8007T_TRACK;
+		/* fall through */
+
+	case VA1J5JF8007T_TRACK:
+		*delay = 3 * HZ;
+		*status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK;
+		return 0;
+
+	case VA1J5JF8007T_ABORT:
+		*delay = 3 * HZ;
+		*status = FE_HAS_SIGNAL;
+		return 0;
+	}
+
+	BUG();
+}
+
+static int va1j5jf8007t_init_frequency(struct va1j5jf8007t_state *state)
+{
+	u8 buf[7];
+	struct i2c_msg msg;
+
+	buf[0] = 0xfe;
+	buf[1] = 0xc2;
+	buf[2] = 0x01;
+	buf[3] = 0x8f;
+	buf[4] = 0xc1;
+	buf[5] = 0x80;
+	buf[6] = 0x80;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007t_set_sleep(struct va1j5jf8007t_state *state, int sleep)
+{
+	u8 buf[2];
+	struct i2c_msg msg;
+
+	buf[0] = 0x03;
+	buf[1] = sleep ? 0x90 : 0x80;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007t_sleep(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007t_state *state;
+	int ret;
+
+	state = fe->demodulator_priv;
+
+	ret = va1j5jf8007t_init_frequency(state);
+	if (ret < 0)
+		return ret;
+
+	return va1j5jf8007t_set_sleep(state, 1);
+}
+
+static int va1j5jf8007t_init(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007t_state *state;
+
+	state = fe->demodulator_priv;
+	state->tune_state = VA1J5JF8007T_IDLE;
+
+	return va1j5jf8007t_set_sleep(state, 0);
+}
+
+static void va1j5jf8007t_release(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007t_state *state;
+	state = fe->demodulator_priv;
+	kfree(state);
+}
+
+static struct dvb_frontend_ops va1j5jf8007t_ops = {
+	.info = {
+		.name = "VA1J5JF8007 ISDB-T",
+		.type = FE_OFDM,
+		.frequency_min = 90000000,
+		.frequency_max = 770000000,
+		.frequency_stepsize = 142857,
+		.caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO |
+			FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.get_frontend_algo = va1j5jf8007t_get_frontend_algo,
+	.read_status = va1j5jf8007t_read_status,
+	.tune = va1j5jf8007t_tune,
+	.sleep = va1j5jf8007t_sleep,
+	.init = va1j5jf8007t_init,
+	.release = va1j5jf8007t_release,
+};
+
+static const u8 va1j5jf8007t_prepare_bufs[][2] = {
+	{0x03, 0x90}, {0x14, 0x8f}, {0x1c, 0x2a}, {0x1d, 0xa8}, {0x1e, 0xa2},
+	{0x22, 0x83}, {0x31, 0x0d}, {0x32, 0xe0}, {0x39, 0xd3}, {0x3a, 0x00},
+	{0x5c, 0x40}, {0x5f, 0x80}, {0x75, 0x02}, {0x76, 0x4e}, {0x77, 0x03},
+	{0xef, 0x01}
+};
+
+int va1j5jf8007t_prepare(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007t_state *state;
+	u8 buf[2];
+	struct i2c_msg msg;
+	int i;
+
+	state = fe->demodulator_priv;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	for (i = 0; i < ARRAY_SIZE(va1j5jf8007t_prepare_bufs); i++) {
+		memcpy(buf, va1j5jf8007t_prepare_bufs[i], sizeof(buf));
+		if (i2c_transfer(state->adap, &msg, 1) != 1)
+			return -EREMOTEIO;
+	}
+
+	return va1j5jf8007t_init_frequency(state);
+}
+
+struct dvb_frontend *
+va1j5jf8007t_attach(const struct va1j5jf8007t_config *config,
+		    struct i2c_adapter *adap)
+{
+	struct va1j5jf8007t_state *state;
+	struct dvb_frontend *fe;
+	u8 buf[2];
+	struct i2c_msg msg;
+
+	state = kzalloc(sizeof(struct va1j5jf8007t_state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	state->config = config;
+	state->adap = adap;
+
+	fe = &state->fe;
+	memcpy(&fe->ops, &va1j5jf8007t_ops, sizeof(struct dvb_frontend_ops));
+	fe->demodulator_priv = state;
+
+	buf[0] = 0x01;
+	buf[1] = 0x80;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1) {
+		kfree(state);
+		return NULL;
+	}
+
+	return fe;
+}
diff --git a/drivers/media/dvb/pt1/va1j5jf8007t.h b/drivers/media/dvb/pt1/va1j5jf8007t.h
new file mode 100644
index 000000000000..ed49906f7769
--- /dev/null
+++ b/drivers/media/dvb/pt1/va1j5jf8007t.h
@@ -0,0 +1,40 @@
+/*
+ * ISDB-T driver for VA1J5JF8007
+ *
+ * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
+ *
+ * based on pt1dvr - http://pt1dvr.sourceforge.jp/
+ * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef VA1J5JF8007T_H
+#define VA1J5JF8007T_H
+
+struct va1j5jf8007t_config {
+	u8 demod_address;
+};
+
+struct i2c_adapter;
+
+struct dvb_frontend *
+va1j5jf8007t_attach(const struct va1j5jf8007t_config *config,
+		    struct i2c_adapter *adap);
+
+/* must be called after va1j5jf8007s_attach */
+int va1j5jf8007t_prepare(struct dvb_frontend *fe);
+
+#endif
diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig
index 8c1aed77ea30..85a222c4eaa0 100644
--- a/drivers/media/dvb/siano/Kconfig
+++ b/drivers/media/dvb/siano/Kconfig
@@ -4,7 +4,7 @@
 
 config SMS_SIANO_MDTV
 	tristate "Siano SMS1xxx based MDTV receiver"
-	depends on DVB_CORE && INPUT
+	depends on DVB_CORE && INPUT && HAS_DMA
 	---help---
 	  Choose Y or M here if you have MDTV receiver with a Siano chipset.
 
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index bd9ab9d0d12a..fa6a62369a78 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1367,7 +1367,7 @@ int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level)
 					    &msg, sizeof(msg));
 }
 
-/* new GPIO managment implementation */
+/* new GPIO management implementation */
 static int GetGpioPinParams(u32 PinNum, u32 *pTranslatedPinNum,
 		u32 *pGroupNum, u32 *pGroupCfg) {
 
diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/dvb/siano/smscoreapi.h
index f1108c64e895..eec18aaf5512 100644
--- a/drivers/media/dvb/siano/smscoreapi.h
+++ b/drivers/media/dvb/siano/smscoreapi.h
@@ -657,12 +657,12 @@ struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev);
 extern void smscore_putbuffer(struct smscore_device_t *coredev,
 			      struct smscore_buffer_t *cb);
 
-/* old GPIO managment */
+/* old GPIO management */
 int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
 			   struct smscore_config_gpio *pinconfig);
 int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level);
 
-/* new GPIO managment */
+/* new GPIO management */
 extern int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
 		struct smscore_gpio_config *pGpioConfig);
 extern int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum,
diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c
index cb8a358b7310..8f88a586b0dd 100644
--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -529,6 +529,12 @@ struct usb_device_id smsusb_id_table[] = {
 		.driver_info = SMS1XXX_BOARD_SIANO_NICE },
 	{ USB_DEVICE(0x187f, 0x0301),
 		.driver_info = SMS1XXX_BOARD_SIANO_VENICE },
+	{ USB_DEVICE(0x2040, 0xb900),
+		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+	{ USB_DEVICE(0x2040, 0xb910),
+		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+	{ USB_DEVICE(0x2040, 0xc000),
+		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
 	{ } /* Terminating entry */
 	};