diff options
| author | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-01-21 01:30:58 +0400 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-01-21 19:46:19 +0400 |
| commit | 67f04617377ecd4ee1547fd9ab3a97af38d572d0 (patch) | |
| tree | 6d5d0219ba227dcbc91e73083448e00f79ccf16a /drivers/media/dvb/frontends/drxk.h | |
| parent | 978c26c3672a15fd545da2e927467b5b6bd67acb (diff) | |
| download | linux-67f04617377ecd4ee1547fd9ab3a97af38d572d0.tar.xz | |
[media] drxk: Allow setting it on dynamic_clock mode
This is used on az6007.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/dvb/frontends/drxk.h')
| -rw-r--r-- | drivers/media/dvb/frontends/drxk.h | 17 |
1 files changed, 10 insertions, 7 deletions
diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb/frontends/drxk.h index 020981844a86..6b0fd2c5dcd6 100644 --- a/drivers/media/dvb/frontends/drxk.h +++ b/drivers/media/dvb/frontends/drxk.h @@ -7,15 +7,17 @@ /** * struct drxk_config - Configure the initial parameters for DRX-K * - * adr: I2C Address of the DRX-K - * parallel_ts: true means that the device uses parallel TS, + * @adr: I2C Address of the DRX-K + * @parallel_ts: True means that the device uses parallel TS, * Serial otherwise. - * single_master: Device is on the single master mode - * no_i2c_bridge: Don't switch the I2C bridge to talk with tuner - * antenna_gpio: GPIO bit used to control the antenna - * antenna_dvbt: GPIO bit for changing antenna to DVB-C. A value of 1 + * @dynamic_clk: True means that the clock will be dynamically + * adjusted. Static clock otherwise. + * @single_master: Device is on the single master mode + * @no_i2c_bridge: Don't switch the I2C bridge to talk with tuner + * @antenna_gpio: GPIO bit used to control the antenna + * @antenna_dvbt: GPIO bit for changing antenna to DVB-C. A value of 1 * means that 1=DVBC, 0 = DVBT. Zero means the opposite. - * microcode_name: Name of the firmware file with the microcode + * @microcode_name: Name of the firmware file with the microcode * * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is * UIO-3. @@ -25,6 +27,7 @@ struct drxk_config { bool single_master; bool no_i2c_bridge; bool parallel_ts; + bool dynamic_clk; bool antenna_dvbt; u16 antenna_gpio; |