[media] move the dvb/frontends to drivers/media/dvb-frontends

Raise the DVB frontends one level up, as the intention is to remove
the drivers/media/dvb directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 620 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c
new file mode 100644
index 000000000000..e37274c8f14e
--- /dev/null
+++ b/drivers/media/dvb-frontends/sp8870.c
@@ -0,0 +1,620 @@
+/*
+    Driver for Spase SP8870 demodulator
+
+    Copyright (C) 1999 Juergen Peitz
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+/*
+ * This driver needs external firmware. Please use the command
+ * "<kerneldir>/Documentation/dvb/get_dvb_firmware alps_tdlb7" to
+ * download/extract it, and then copy it to /usr/lib/hotplug/firmware
+ * or /lib/firmware (depending on configuration of firmware hotplug).
+ */
+#define SP8870_DEFAULT_FIRMWARE "dvb-fe-sp8870.fw"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include "dvb_frontend.h"
+#include "sp8870.h"
+
+
+struct sp8870_state {
+
+	struct i2c_adapter* i2c;
+
+	const struct sp8870_config* config;
+
+	struct dvb_frontend frontend;
+
+	/* demodulator private data */
+	u8 initialised:1;
+};
+
+static int debug;
+#define dprintk(args...) \
+	do { \
+		if (debug) printk(KERN_DEBUG "sp8870: " args); \
+	} while (0)
+
+/* firmware size for sp8870 */
+#define SP8870_FIRMWARE_SIZE 16382
+
+/* starting point for firmware in file 'Sc_main.mc' */
+#define SP8870_FIRMWARE_OFFSET 0x0A
+
+static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data)
+{
+	u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
+	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 };
+	int err;
+
+	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+		dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int sp8870_readreg (struct sp8870_state* state, u16 reg)
+{
+	int ret;
+	u8 b0 [] = { reg >> 8 , reg & 0xff };
+	u8 b1 [] = { 0, 0 };
+	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
+			   { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 } };
+
+	ret = i2c_transfer (state->i2c, msg, 2);
+
+	if (ret != 2) {
+		dprintk("%s: readreg error (ret == %i)\n", __func__, ret);
+		return -1;
+	}
+
+	return (b1[0] << 8 | b1[1]);
+}
+
+static int sp8870_firmware_upload (struct sp8870_state* state, const struct firmware *fw)
+{
+	struct i2c_msg msg;
+	const char *fw_buf = fw->data;
+	int fw_pos;
+	u8 tx_buf[255];
+	int tx_len;
+	int err = 0;
+
+	dprintk ("%s: ...\n", __func__);
+
+	if (fw->size < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET)
+		return -EINVAL;
+
+	// system controller stop
+	sp8870_writereg(state, 0x0F00, 0x0000);
+
+	// instruction RAM register hiword
+	sp8870_writereg(state, 0x8F08, ((SP8870_FIRMWARE_SIZE / 2) & 0xFFFF));
+
+	// instruction RAM MWR
+	sp8870_writereg(state, 0x8F0A, ((SP8870_FIRMWARE_SIZE / 2) >> 16));
+
+	// do firmware upload
+	fw_pos = SP8870_FIRMWARE_OFFSET;
+	while (fw_pos < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET){
+		tx_len = (fw_pos <= SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - 252) ? 252 : SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - fw_pos;
+		// write register 0xCF0A
+		tx_buf[0] = 0xCF;
+		tx_buf[1] = 0x0A;
+		memcpy(&tx_buf[2], fw_buf + fw_pos, tx_len);
+		msg.addr = state->config->demod_address;
+		msg.flags = 0;
+		msg.buf = tx_buf;
+		msg.len = tx_len + 2;
+		if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+			printk("%s: firmware upload failed!\n", __func__);
+			printk ("%s: i2c error (err == %i)\n", __func__, err);
+			return err;
+		}
+		fw_pos += tx_len;
+	}
+
+	dprintk ("%s: done!\n", __func__);
+	return 0;
+};
+
+static void sp8870_microcontroller_stop (struct sp8870_state* state)
+{
+	sp8870_writereg(state, 0x0F08, 0x000);
+	sp8870_writereg(state, 0x0F09, 0x000);
+
+	// microcontroller STOP
+	sp8870_writereg(state, 0x0F00, 0x000);
+}
+
+static void sp8870_microcontroller_start (struct sp8870_state* state)
+{
+	sp8870_writereg(state, 0x0F08, 0x000);
+	sp8870_writereg(state, 0x0F09, 0x000);
+
+	// microcontroller START
+	sp8870_writereg(state, 0x0F00, 0x001);
+	// not documented but if we don't read 0x0D01 out here
+	// we don't get a correct data valid signal
+	sp8870_readreg(state, 0x0D01);
+}
+
+static int sp8870_read_data_valid_signal(struct sp8870_state* state)
+{
+	return (sp8870_readreg(state, 0x0D02) > 0);
+}
+
+static int configure_reg0xc05 (struct dtv_frontend_properties *p, u16 *reg0xc05)
+{
+	int known_parameters = 1;
+
+	*reg0xc05 = 0x000;
+
+	switch (p->modulation) {
+	case QPSK:
+		break;
+	case QAM_16:
+		*reg0xc05 |= (1 << 10);
+		break;
+	case QAM_64:
+		*reg0xc05 |= (2 << 10);
+		break;
+	case QAM_AUTO:
+		known_parameters = 0;
+		break;
+	default:
+		return -EINVAL;
+	};
+
+	switch (p->hierarchy) {
+	case HIERARCHY_NONE:
+		break;
+	case HIERARCHY_1:
+		*reg0xc05 |= (1 << 7);
+		break;
+	case HIERARCHY_2:
+		*reg0xc05 |= (2 << 7);
+		break;
+	case HIERARCHY_4:
+		*reg0xc05 |= (3 << 7);
+		break;
+	case HIERARCHY_AUTO:
+		known_parameters = 0;
+		break;
+	default:
+		return -EINVAL;
+	};
+
+	switch (p->code_rate_HP) {
+	case FEC_1_2:
+		break;
+	case FEC_2_3:
+		*reg0xc05 |= (1 << 3);
+		break;
+	case FEC_3_4:
+		*reg0xc05 |= (2 << 3);
+		break;
+	case FEC_5_6:
+		*reg0xc05 |= (3 << 3);
+		break;
+	case FEC_7_8:
+		*reg0xc05 |= (4 << 3);
+		break;
+	case FEC_AUTO:
+		known_parameters = 0;
+		break;
+	default:
+		return -EINVAL;
+	};
+
+	if (known_parameters)
+		*reg0xc05 |= (2 << 1);	/* use specified parameters */
+	else
+		*reg0xc05 |= (1 << 1);	/* enable autoprobing */
+
+	return 0;
+}
+
+static int sp8870_wake_up(struct sp8870_state* state)
+{
+	// enable TS output and interface pins
+	return sp8870_writereg(state, 0xC18, 0x00D);
+}
+
+static int sp8870_set_frontend_parameters(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct sp8870_state* state = fe->demodulator_priv;
+	int  err;
+	u16 reg0xc05;
+
+	if ((err = configure_reg0xc05(p, &reg0xc05)))
+		return err;
+
+	// system controller stop
+	sp8870_microcontroller_stop(state);
+
+	// set tuner parameters
+	if (fe->ops.tuner_ops.set_params) {
+		fe->ops.tuner_ops.set_params(fe);
+		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
+	}
+
+	// sample rate correction bit [23..17]
+	sp8870_writereg(state, 0x0319, 0x000A);
+
+	// sample rate correction bit [16..0]
+	sp8870_writereg(state, 0x031A, 0x0AAB);
+
+	// integer carrier offset
+	sp8870_writereg(state, 0x0309, 0x0400);
+
+	// fractional carrier offset
+	sp8870_writereg(state, 0x030A, 0x0000);
+
+	// filter for 6/7/8 Mhz channel
+	if (p->bandwidth_hz == 6000000)
+		sp8870_writereg(state, 0x0311, 0x0002);
+	else if (p->bandwidth_hz == 7000000)
+		sp8870_writereg(state, 0x0311, 0x0001);
+	else
+		sp8870_writereg(state, 0x0311, 0x0000);
+
+	// scan order: 2k first = 0x0000, 8k first = 0x0001
+	if (p->transmission_mode == TRANSMISSION_MODE_2K)
+		sp8870_writereg(state, 0x0338, 0x0000);
+	else
+		sp8870_writereg(state, 0x0338, 0x0001);
+
+	sp8870_writereg(state, 0xc05, reg0xc05);
+
+	// read status reg in order to clear pending irqs
+	sp8870_readreg(state, 0x200);
+
+	// system controller start
+	sp8870_microcontroller_start(state);
+
+	return 0;
+}
+
+static int sp8870_init (struct dvb_frontend* fe)
+{
+	struct sp8870_state* state = fe->demodulator_priv;
+	const struct firmware *fw = NULL;
+
+	sp8870_wake_up(state);
+	if (state->initialised) return 0;
+	state->initialised = 1;
+
+	dprintk ("%s\n", __func__);
+
+
+	/* request the firmware, this will block until someone uploads it */
+	printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE);
+	if (state->config->request_firmware(fe, &fw, SP8870_DEFAULT_FIRMWARE)) {
+		printk("sp8870: no firmware upload (timeout or file not found?)\n");
+		return -EIO;
+	}
+
+	if (sp8870_firmware_upload(state, fw)) {
+		printk("sp8870: writing firmware to device failed\n");
+		release_firmware(fw);
+		return -EIO;
+	}
+	release_firmware(fw);
+	printk("sp8870: firmware upload complete\n");
+
+	/* enable TS output and interface pins */
+	sp8870_writereg(state, 0xc18, 0x00d);
+
+	// system controller stop
+	sp8870_microcontroller_stop(state);
+
+	// ADC mode
+	sp8870_writereg(state, 0x0301, 0x0003);
+
+	// Reed Solomon parity bytes passed to output
+	sp8870_writereg(state, 0x0C13, 0x0001);
+
+	// MPEG clock is suppressed if no valid data
+	sp8870_writereg(state, 0x0C14, 0x0001);
+
+	/* bit 0x010: enable data valid signal */
+	sp8870_writereg(state, 0x0D00, 0x010);
+	sp8870_writereg(state, 0x0D01, 0x000);
+
+	return 0;
+}
+
+static int sp8870_read_status (struct dvb_frontend* fe, fe_status_t * fe_status)
+{
+	struct sp8870_state* state = fe->demodulator_priv;
+	int status;
+	int signal;
+
+	*fe_status = 0;
+
+	status = sp8870_readreg (state, 0x0200);
+	if (status < 0)
+		return -EIO;
+
+	signal = sp8870_readreg (state, 0x0303);
+	if (signal < 0)
+		return -EIO;
+
+	if (signal > 0x0F)
+		*fe_status |= FE_HAS_SIGNAL;
+	if (status & 0x08)
+		*fe_status |= FE_HAS_SYNC;
+	if (status & 0x04)
+		*fe_status |= FE_HAS_LOCK | FE_HAS_CARRIER | FE_HAS_VITERBI;
+
+	return 0;
+}
+
+static int sp8870_read_ber (struct dvb_frontend* fe, u32 * ber)
+{
+	struct sp8870_state* state = fe->demodulator_priv;
+	int ret;
+	u32 tmp;
+
+	*ber = 0;
+
+	ret = sp8870_readreg(state, 0xC08);
+	if (ret < 0)
+		return -EIO;
+
+	tmp = ret & 0x3F;
+
+	ret = sp8870_readreg(state, 0xC07);
+	if (ret < 0)
+		return -EIO;
+
+	 tmp = ret << 6;
+
+	if (tmp >= 0x3FFF0)
+		tmp = ~0;
+
+	*ber = tmp;
+
+	return 0;
+}
+
+static int sp8870_read_signal_strength(struct dvb_frontend* fe,  u16 * signal)
+{
+	struct sp8870_state* state = fe->demodulator_priv;
+	int ret;
+	u16 tmp;
+
+	*signal = 0;
+
+	ret = sp8870_readreg (state, 0x306);
+	if (ret < 0)
+		return -EIO;
+
+	tmp = ret << 8;
+
+	ret = sp8870_readreg (state, 0x303);
+	if (ret < 0)
+		return -EIO;
+
+	tmp |= ret;
+
+	if (tmp)
+		*signal = 0xFFFF - tmp;
+
+	return 0;
+}
+
+static int sp8870_read_uncorrected_blocks (struct dvb_frontend* fe, u32* ublocks)
+{
+	struct sp8870_state* state = fe->demodulator_priv;
+	int ret;
+
+	*ublocks = 0;
+
+	ret = sp8870_readreg(state, 0xC0C);
+	if (ret < 0)
+		return -EIO;
+
+	if (ret == 0xFFFF)
+		ret = ~0;
+
+	*ublocks = ret;
+
+	return 0;
+}
+
+/* number of trials to recover from lockup */
+#define MAXTRIALS 5
+/* maximum checks for data valid signal */
+#define MAXCHECKS 100
+
+/* only for debugging: counter for detected lockups */
+static int lockups;
+/* only for debugging: counter for channel switches */
+static int switches;
+
+static int sp8870_set_frontend(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct sp8870_state* state = fe->demodulator_priv;
+
+	/*
+	    The firmware of the sp8870 sometimes locks up after setting frontend parameters.
+	    We try to detect this by checking the data valid signal.
+	    If it is not set after MAXCHECKS we try to recover the lockup by setting
+	    the frontend parameters again.
+	*/
+
+	int err = 0;
+	int valid = 0;
+	int trials = 0;
+	int check_count = 0;
+
+	dprintk("%s: frequency = %i\n", __func__, p->frequency);
+
+	for (trials = 1; trials <= MAXTRIALS; trials++) {
+
+		err = sp8870_set_frontend_parameters(fe);
+		if (err)
+			return err;
+
+		for (check_count = 0; check_count < MAXCHECKS; check_count++) {
+//			valid = ((sp8870_readreg(i2c, 0x0200) & 4) == 0);
+			valid = sp8870_read_data_valid_signal(state);
+			if (valid) {
+				dprintk("%s: delay = %i usec\n",
+					__func__, check_count * 10);
+				break;
+			}
+			udelay(10);
+		}
+		if (valid)
+			break;
+	}
+
+	if (!valid) {
+		printk("%s: firmware crash!!!!!!\n", __func__);
+		return -EIO;
+	}
+
+	if (debug) {
+		if (valid) {
+			if (trials > 1) {
+				printk("%s: firmware lockup!!!\n", __func__);
+				printk("%s: recovered after %i trial(s))\n",  __func__, trials - 1);
+				lockups++;
+			}
+		}
+		switches++;
+		printk("%s: switches = %i lockups = %i\n", __func__, switches, lockups);
+	}
+
+	return 0;
+}
+
+static int sp8870_sleep(struct dvb_frontend* fe)
+{
+	struct sp8870_state* state = fe->demodulator_priv;
+
+	// tristate TS output and disable interface pins
+	return sp8870_writereg(state, 0xC18, 0x000);
+}
+
+static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
+{
+	fesettings->min_delay_ms = 350;
+	fesettings->step_size = 0;
+	fesettings->max_drift = 0;
+	return 0;
+}
+
+static int sp8870_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
+{
+	struct sp8870_state* state = fe->demodulator_priv;
+
+	if (enable) {
+		return sp8870_writereg(state, 0x206, 0x001);
+	} else {
+		return sp8870_writereg(state, 0x206, 0x000);
+	}
+}
+
+static void sp8870_release(struct dvb_frontend* fe)
+{
+	struct sp8870_state* state = fe->demodulator_priv;
+	kfree(state);
+}
+
+static struct dvb_frontend_ops sp8870_ops;
+
+struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
+				   struct i2c_adapter* i2c)
+{
+	struct sp8870_state* state = NULL;
+
+	/* allocate memory for the internal state */
+	state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL);
+	if (state == NULL) goto error;
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+	state->initialised = 0;
+
+	/* check if the demod is there */
+	if (sp8870_readreg(state, 0x0200) < 0) goto error;
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &sp8870_ops, sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+
+error:
+	kfree(state);
+	return NULL;
+}
+
+static struct dvb_frontend_ops sp8870_ops = {
+	.delsys = { SYS_DVBT },
+	.info = {
+		.name			= "Spase SP8870 DVB-T",
+		.frequency_min		= 470000000,
+		.frequency_max		= 860000000,
+		.frequency_stepsize	= 166666,
+		.caps			= FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
+					  FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
+					  FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+					  FE_CAN_QPSK | FE_CAN_QAM_16 |
+					  FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+					  FE_CAN_HIERARCHY_AUTO |  FE_CAN_RECOVER
+	},
+
+	.release = sp8870_release,
+
+	.init = sp8870_init,
+	.sleep = sp8870_sleep,
+	.i2c_gate_ctrl = sp8870_i2c_gate_ctrl,
+
+	.set_frontend = sp8870_set_frontend,
+	.get_tune_settings = sp8870_get_tune_settings,
+
+	.read_status = sp8870_read_status,
+	.read_ber = sp8870_read_ber,
+	.read_signal_strength = sp8870_read_signal_strength,
+	.read_ucblocks = sp8870_read_uncorrected_blocks,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+MODULE_DESCRIPTION("Spase SP8870 DVB-T Demodulator driver");
+MODULE_AUTHOR("Juergen Peitz");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(sp8870_attach);