[media] rename drivers/media/IR to drives/media/rc

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 167 deletions

diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
deleted file mode 100644
index 20e02a0a5e48..000000000000
--- a/drivers/media/IR/Kconfig
+++ /dev/null
@@ -1,167 +0,0 @@
-menuconfig IR_CORE
-	tristate "Infrared remote controller adapters"
-	depends on INPUT
-	default INPUT
-	---help---
-	  Enable support for Remote Controllers on Linux. This is
-	  needed in order to support several video capture adapters.
-
-	  Enable this option if you have a video capture board even
-	  if you don't need IR, as otherwise, you may not be able to
-	  compile the driver for your adapter.
-
-config IR_LEGACY
-	tristate
-	depends on IR_CORE
-	default IR_CORE
-
-if IR_CORE
-
-config LIRC
-	tristate
-	default y
-
-	---help---
-	   Enable this option to build the Linux Infrared Remote
-	   Control (LIRC) core device interface driver. The LIRC
-	   interface passes raw IR to and from userspace, where the
-	   LIRC daemon handles protocol decoding for IR reception and
-	   encoding for IR transmitting (aka "blasting").
-
-source "drivers/media/IR/keymaps/Kconfig"
-
-config IR_NEC_DECODER
-	tristate "Enable IR raw decoder for the NEC protocol"
-	depends on IR_CORE
-	select BITREVERSE
-	default y
-
-	---help---
-	   Enable this option if you have IR with NEC protocol, and
-	   if the IR is decoded in software
-
-config IR_RC5_DECODER
-	tristate "Enable IR raw decoder for the RC-5 protocol"
-	depends on IR_CORE
-	select BITREVERSE
-	default y
-
-	---help---
-	   Enable this option if you have IR with RC-5 protocol, and
-	   if the IR is decoded in software
-
-config IR_RC6_DECODER
-	tristate "Enable IR raw decoder for the RC6 protocol"
-	depends on IR_CORE
-	select BITREVERSE
-	default y
-
-	---help---
-	   Enable this option if you have an infrared remote control which
-	   uses the RC6 protocol, and you need software decoding support.
-
-config IR_JVC_DECODER
-	tristate "Enable IR raw decoder for the JVC protocol"
-	depends on IR_CORE
-	select BITREVERSE
-	default y
-
-	---help---
-	   Enable this option if you have an infrared remote control which
-	   uses the JVC protocol, and you need software decoding support.
-
-config IR_SONY_DECODER
-	tristate "Enable IR raw decoder for the Sony protocol"
-	depends on IR_CORE
-	default y
-
-	---help---
-	   Enable this option if you have an infrared remote control which
-	   uses the Sony protocol, and you need software decoding support.
-
-config IR_RC5_SZ_DECODER
-	tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
-	depends on IR_CORE
-	select BITREVERSE
-	default y
-
-	---help---
-	   Enable this option if you have IR with RC-5 (streamzap) protocol,
-	   and if the IR is decoded in software. (The Streamzap PC Remote
-	   uses an IR protocol that is almost standard RC-5, but not quite,
-	   as it uses an additional bit).
-
-config IR_LIRC_CODEC
-	tristate "Enable IR to LIRC bridge"
-	depends on IR_CORE
-	depends on LIRC
-	default y
-
-	---help---
-	   Enable this option to pass raw IR to and from userspace via
-	   the LIRC interface.
-
-config IR_ENE
-	tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
-	depends on PNP
-	depends on IR_CORE
-	---help---
-	   Say Y here to enable support for integrated infrared receiver
-	   /transceiver made by ENE.
-
-	   You can see if you have it by looking at lspnp output.
-	   Output should include ENE0100 ENE0200 or something similar.
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called ene_ir.
-
-config IR_IMON
-	tristate "SoundGraph iMON Receiver and Display"
-	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
-	select USB
-	---help---
-	   Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
-	   IR Receiver and/or LCD/VFD/VGA display.
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called imon.
-
-config IR_MCEUSB
-	tristate "Windows Media Center Ed. eHome Infrared Transceiver"
-	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
-	select USB
-	---help---
-	   Say Y here if you want to use a Windows Media Center Edition
-	   eHome Infrared Transceiver.
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called mceusb.
-
-config IR_NUVOTON
-	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
-	depends on PNP
-	depends on IR_CORE
-	---help---
-	   Say Y here to enable support for integrated infrared receiver
-	   /transciever made by Nuvoton (formerly Winbond). This chip is
-	   found in the ASRock ION 330HT, as well as assorted Intel
-	   DP55-series motherboards (and of course, possibly others).
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called nuvoton-cir.
-
-config IR_STREAMZAP
-	tristate "Streamzap PC Remote IR Receiver"
-	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
-	select USB
-	---help---
-	   Say Y here if you want to use a Streamzap PC Remote
-	   Infrared Receiver.
-
-	   To compile this driver as a module, choose M here: the
-	   module will be called streamzap.
-
-endif #IR_CORE