md/raid5: disable 'DISCARD' by default due to safety concerns.

It has come to my attention (thanks Martin) that 'discard_zeroes_data'
is only a hint.  Some devices in some cases don't do what it
says on the label.

The use of DISCARD in RAID5 depends on reads from discarded regions
being predictably zero.  If a write to a previously discarded region
performs a read-modify-write cycle it assumes that the parity block
was consistent with the data blocks.  If all were zero, this would
be the case.  If some are and some aren't this would not be the case.
This could lead to data corruption after a device failure when
data needs to be reconstructed from the parity.

As we cannot trust 'discard_zeroes_data', ignore it by default
and so disallow DISCARD on all raid4/5/6 arrays.

As many devices are trustworthy, and as there are benefits to using
DISCARD, add a module parameter to over-ride this caution and cause
DISCARD to work if discard_zeroes_data is set.

If a site want to enable DISCARD on some arrays but not on others they
should select DISCARD support at the filesystem level, and set the
raid456 module parameter.
    raid456.devices_handle_discard_safely=Y

As this is a data-safety issue, I believe this patch is suitable for
-stable.
DISCARD support for RAID456 was added in 3.7

Cc: Shaohua Li <shli@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Heinz Mauelshagen <heinzm@redhat.com>
Cc: stable@vger.kernel.org (3.7+)
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Fixes: 620125f2bf8ff0c4969b79653b54d7bcc9d40637
Signed-off-by: NeilBrown <neilb@suse.de>

1 files changed, 17 insertions, 1 deletions

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 183588b11fc1..9f0fbecd1eb5 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -64,6 +64,10 @@
 #define cpu_to_group(cpu) cpu_to_node(cpu)
 #define ANY_GROUP NUMA_NO_NODE
 
+static bool devices_handle_discard_safely = false;
+module_param(devices_handle_discard_safely, bool, 0644);
+MODULE_PARM_DESC(devices_handle_discard_safely,
+		 "Set to Y if all devices in each array reliably return zeroes on reads from discarded regions");
 static struct workqueue_struct *raid5_wq;
 /*
  * Stripe cache
@@ -6208,7 +6212,7 @@ static int run(struct mddev *mddev)
 		mddev->queue->limits.discard_granularity = stripe;
 		/*
 		 * unaligned part of discard request will be ignored, so can't
-		 * guarantee discard_zerors_data
+		 * guarantee discard_zeroes_data
 		 */
 		mddev->queue->limits.discard_zeroes_data = 0;
 
@@ -6233,6 +6237,18 @@ static int run(struct mddev *mddev)
 			    !bdev_get_queue(rdev->bdev)->
 						limits.discard_zeroes_data)
 				discard_supported = false;
+			/* Unfortunately, discard_zeroes_data is not currently
+			 * a guarantee - just a hint.  So we only allow DISCARD
+			 * if the sysadmin has confirmed that only safe devices
+			 * are in use by setting a module parameter.
+			 */
+			if (!devices_handle_discard_safely) {
+				if (discard_supported) {
+					pr_info("md/raid456: discard support disabled due to uncertainty.\n");
+					pr_info("Set raid456.devices_handle_discard_safely=Y to override.\n");
+				}
+				discard_supported = false;
+			}
 		}
 
 		if (discard_supported &&