Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1063 insertions, 0 deletions

diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c
new file mode 100644
index 000000000000..820dc52e30bc
--- /dev/null
+++ b/drivers/macintosh/via-pmu68k.c
@@ -0,0 +1,1063 @@
+/*
+ * Device driver for the PMU on 68K-based Apple PowerBooks
+ *
+ * The VIA (versatile interface adapter) interfaces to the PMU,
+ * a 6805 microprocessor core whose primary function is to control
+ * battery charging and system power on the PowerBooks.
+ * The PMU also controls the ADB (Apple Desktop Bus) which connects
+ * to the keyboard and mouse, as well as the non-volatile RAM
+ * and the RTC (real time clock) chip.
+ *
+ * Adapted for 68K PMU by Joshua M. Thompson
+ *
+ * Based largely on the PowerMac PMU code by Paul Mackerras and
+ * Fabio Riccardi.
+ *
+ * Also based on the PMU driver from MkLinux by Apple Computer, Inc.
+ * and the Open Software Foundation, Inc.
+ */
+
+#include <stdarg.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/miscdevice.h>
+#include <linux/blkdev.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/cuda.h>
+
+#include <asm/macintosh.h>
+#include <asm/macints.h>
+#include <asm/machw.h>
+#include <asm/mac_via.h>
+
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* Misc minor number allocated for /dev/pmu */
+#define PMU_MINOR	154
+
+/* VIA registers - spaced 0x200 bytes apart */
+#define RS		0x200		/* skip between registers */
+#define B		0		/* B-side data */
+#define A		RS		/* A-side data */
+#define DIRB		(2*RS)		/* B-side direction (1=output) */
+#define DIRA		(3*RS)		/* A-side direction (1=output) */
+#define T1CL		(4*RS)		/* Timer 1 ctr/latch (low 8 bits) */
+#define T1CH		(5*RS)		/* Timer 1 counter (high 8 bits) */
+#define T1LL		(6*RS)		/* Timer 1 latch (low 8 bits) */
+#define T1LH		(7*RS)		/* Timer 1 latch (high 8 bits) */
+#define T2CL		(8*RS)		/* Timer 2 ctr/latch (low 8 bits) */
+#define T2CH		(9*RS)		/* Timer 2 counter (high 8 bits) */
+#define SR		(10*RS)		/* Shift register */
+#define ACR		(11*RS)		/* Auxiliary control register */
+#define PCR		(12*RS)		/* Peripheral control register */
+#define IFR		(13*RS)		/* Interrupt flag register */
+#define IER		(14*RS)		/* Interrupt enable register */
+#define ANH		(15*RS)		/* A-side data, no handshake */
+
+/* Bits in B data register: both active low */
+#define TACK		0x02		/* Transfer acknowledge (input) */
+#define TREQ		0x04		/* Transfer request (output) */
+
+/* Bits in ACR */
+#define SR_CTRL		0x1c		/* Shift register control bits */
+#define SR_EXT		0x0c		/* Shift on external clock */
+#define SR_OUT		0x10		/* Shift out if 1 */
+
+/* Bits in IFR and IER */
+#define SR_INT		0x04		/* Shift register full/empty */
+#define CB1_INT		0x10		/* transition on CB1 input */
+
+static enum pmu_state {
+	idle,
+	sending,
+	intack,
+	reading,
+	reading_intr,
+} pmu_state;
+
+static struct adb_request *current_req;
+static struct adb_request *last_req;
+static struct adb_request *req_awaiting_reply;
+static unsigned char interrupt_data[32];
+static unsigned char *reply_ptr;
+static int data_index;
+static int data_len;
+static int adb_int_pending;
+static int pmu_adb_flags;
+static int adb_dev_map = 0;
+static struct adb_request bright_req_1, bright_req_2, bright_req_3;
+static int pmu_kind = PMU_UNKNOWN;
+static int pmu_fully_inited = 0;
+
+int asleep;
+struct notifier_block *sleep_notifier_list;
+
+static int pmu_probe(void);
+static int pmu_init(void);
+static void pmu_start(void);
+static irqreturn_t pmu_interrupt(int irq, void *arg, struct pt_regs *regs);
+static int pmu_send_request(struct adb_request *req, int sync);
+static int pmu_autopoll(int devs);
+void pmu_poll(void);
+static int pmu_reset_bus(void);
+static int pmu_queue_request(struct adb_request *req);
+
+static void pmu_start(void);
+static void send_byte(int x);
+static void recv_byte(void);
+static void pmu_done(struct adb_request *req);
+static void pmu_handle_data(unsigned char *data, int len,
+			    struct pt_regs *regs);
+static void set_volume(int level);
+static void pmu_enable_backlight(int on);
+static void pmu_set_brightness(int level);
+
+struct adb_driver via_pmu_driver = {
+	"68K PMU",
+	pmu_probe,
+	pmu_init,
+	pmu_send_request,
+	pmu_autopoll,
+	pmu_poll,
+	pmu_reset_bus
+};
+
+/*
+ * This table indicates for each PMU opcode:
+ * - the number of data bytes to be sent with the command, or -1
+ *   if a length byte should be sent,
+ * - the number of response bytes which the PMU will return, or
+ *   -1 if it will send a length byte.
+ */
+static s8 pmu_data_len[256][2] = {
+/*	   0	   1	   2	   3	   4	   5	   6	   7  */
+/*00*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*08*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+/*10*/	{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*18*/	{ 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0, 0},
+/*20*/	{-1, 0},{ 0, 0},{ 2, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*28*/	{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0,-1},
+/*30*/	{ 4, 0},{20, 0},{-1, 0},{ 3, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*38*/	{ 0, 4},{ 0,20},{ 2,-1},{ 2, 1},{ 3,-1},{-1,-1},{-1,-1},{ 4, 0},
+/*40*/	{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*48*/	{ 0, 1},{ 0, 1},{-1,-1},{ 1, 0},{ 1, 0},{-1,-1},{-1,-1},{-1,-1},
+/*50*/	{ 1, 0},{ 0, 0},{ 2, 0},{ 2, 0},{-1, 0},{ 1, 0},{ 3, 0},{ 1, 0},
+/*58*/	{ 0, 1},{ 1, 0},{ 0, 2},{ 0, 2},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},
+/*60*/	{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*68*/	{ 0, 3},{ 0, 3},{ 0, 2},{ 0, 8},{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},
+/*70*/	{ 1, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*78*/	{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{ 5, 1},{ 4, 1},{ 4, 1},
+/*80*/	{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*88*/	{ 0, 5},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+/*90*/	{ 1, 0},{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*98*/	{ 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+/*a0*/	{ 2, 0},{ 2, 0},{ 2, 0},{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},
+/*a8*/	{ 1, 1},{ 1, 0},{ 3, 0},{ 2, 0},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+/*b0*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*b8*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+/*c0*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*c8*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+/*d0*/	{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*d8*/	{ 1, 1},{ 1, 1},{-1,-1},{-1,-1},{ 0, 1},{ 0,-1},{-1,-1},{-1,-1},
+/*e0*/	{-1, 0},{ 4, 0},{ 0, 1},{-1, 0},{-1, 0},{ 4, 0},{-1, 0},{-1, 0},
+/*e8*/	{ 3,-1},{-1,-1},{ 0, 1},{-1,-1},{ 0,-1},{-1,-1},{-1,-1},{ 0, 0},
+/*f0*/	{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*f8*/	{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+};
+
+int pmu_probe(void)
+{
+	if (macintosh_config->adb_type == MAC_ADB_PB1) {
+		pmu_kind = PMU_68K_V1;
+	} else if (macintosh_config->adb_type == MAC_ADB_PB2) {
+		pmu_kind = PMU_68K_V2;
+	} else {
+		return -ENODEV;
+	}
+
+	pmu_state = idle;
+
+	return 0;
+}
+
+static int 
+pmu_init(void)
+{
+	int timeout;
+	volatile struct adb_request req;
+
+	via2[B] |= TREQ;				/* negate TREQ */
+	via2[DIRB] = (via2[DIRB] | TREQ) & ~TACK;	/* TACK in, TREQ out */
+
+	pmu_request((struct adb_request *) &req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB);
+	timeout =  100000;
+	while (!req.complete) {
+		if (--timeout < 0) {
+			printk(KERN_ERR "pmu_init: no response from PMU\n");
+			return -EAGAIN;
+		}
+		udelay(10);
+		pmu_poll();
+	}
+
+	/* ack all pending interrupts */
+	timeout = 100000;
+	interrupt_data[0] = 1;
+	while (interrupt_data[0] || pmu_state != idle) {
+		if (--timeout < 0) {
+			printk(KERN_ERR "pmu_init: timed out acking intrs\n");
+			return -EAGAIN;
+		}
+		if (pmu_state == idle) {
+			adb_int_pending = 1;
+			pmu_interrupt(0, NULL, NULL);
+		}
+		pmu_poll();
+		udelay(10);
+	}
+
+	pmu_request((struct adb_request *) &req, NULL, 2, PMU_SET_INTR_MASK,
+			PMU_INT_ADB_AUTO|PMU_INT_SNDBRT|PMU_INT_ADB);
+	timeout =  100000;
+	while (!req.complete) {
+		if (--timeout < 0) {
+			printk(KERN_ERR "pmu_init: no response from PMU\n");
+			return -EAGAIN;
+		}
+		udelay(10);
+		pmu_poll();
+	}
+
+	bright_req_1.complete = 1;
+	bright_req_2.complete = 1;
+	bright_req_3.complete = 1;
+
+	if (request_irq(IRQ_MAC_ADB_SR, pmu_interrupt, 0, "pmu-shift",
+			pmu_interrupt)) {
+		printk(KERN_ERR "pmu_init: can't get irq %d\n",
+			IRQ_MAC_ADB_SR);
+		return -EAGAIN;
+	}
+	if (request_irq(IRQ_MAC_ADB_CL, pmu_interrupt, 0, "pmu-clock",
+			pmu_interrupt)) {
+		printk(KERN_ERR "pmu_init: can't get irq %d\n",
+			IRQ_MAC_ADB_CL);
+		free_irq(IRQ_MAC_ADB_SR, pmu_interrupt);
+		return -EAGAIN;
+	}
+
+	pmu_fully_inited = 1;
+	
+	/* Enable backlight */
+	pmu_enable_backlight(1);
+
+	printk("adb: PMU 68K driver v0.5 for Unified ADB.\n");
+
+	return 0;
+}
+
+int
+pmu_get_model(void)
+{
+	return pmu_kind;
+}
+
+/* Send an ADB command */
+static int 
+pmu_send_request(struct adb_request *req, int sync)
+{
+    int i, ret;
+
+    if (!pmu_fully_inited)
+    {
+ 	req->complete = 1;
+   	return -ENXIO;
+   }
+
+    ret = -EINVAL;
+	
+    switch (req->data[0]) {
+    case PMU_PACKET:
+		for (i = 0; i < req->nbytes - 1; ++i)
+			req->data[i] = req->data[i+1];
+		--req->nbytes;
+		if (pmu_data_len[req->data[0]][1] != 0) {
+			req->reply[0] = ADB_RET_OK;
+			req->reply_len = 1;
+		} else
+			req->reply_len = 0;
+		ret = pmu_queue_request(req);
+		break;
+    case CUDA_PACKET:
+		switch (req->data[1]) {
+		case CUDA_GET_TIME:
+			if (req->nbytes != 2)
+				break;
+			req->data[0] = PMU_READ_RTC;
+			req->nbytes = 1;
+			req->reply_len = 3;
+			req->reply[0] = CUDA_PACKET;
+			req->reply[1] = 0;
+			req->reply[2] = CUDA_GET_TIME;
+			ret = pmu_queue_request(req);
+			break;
+		case CUDA_SET_TIME:
+			if (req->nbytes != 6)
+				break;
+			req->data[0] = PMU_SET_RTC;
+			req->nbytes = 5;
+			for (i = 1; i <= 4; ++i)
+				req->data[i] = req->data[i+1];
+			req->reply_len = 3;
+			req->reply[0] = CUDA_PACKET;
+			req->reply[1] = 0;
+			req->reply[2] = CUDA_SET_TIME;
+			ret = pmu_queue_request(req);
+			break;
+		case CUDA_GET_PRAM:
+			if (req->nbytes != 4)
+				break;
+			req->data[0] = PMU_READ_NVRAM;
+			req->data[1] = req->data[2];
+			req->data[2] = req->data[3];
+			req->nbytes = 3;
+			req->reply_len = 3;
+			req->reply[0] = CUDA_PACKET;
+			req->reply[1] = 0;
+			req->reply[2] = CUDA_GET_PRAM;
+			ret = pmu_queue_request(req);
+			break;
+		case CUDA_SET_PRAM:
+			if (req->nbytes != 5)
+				break;
+			req->data[0] = PMU_WRITE_NVRAM;
+			req->data[1] = req->data[2];
+			req->data[2] = req->data[3];
+			req->data[3] = req->data[4];
+			req->nbytes = 4;
+			req->reply_len = 3;
+			req->reply[0] = CUDA_PACKET;
+			req->reply[1] = 0;
+			req->reply[2] = CUDA_SET_PRAM;
+			ret = pmu_queue_request(req);
+			break;
+		}
+		break;
+    case ADB_PACKET:
+		for (i = req->nbytes - 1; i > 1; --i)
+			req->data[i+2] = req->data[i];
+		req->data[3] = req->nbytes - 2;
+		req->data[2] = pmu_adb_flags;
+		/*req->data[1] = req->data[1];*/
+		req->data[0] = PMU_ADB_CMD;
+		req->nbytes += 2;
+		req->reply_expected = 1;
+		req->reply_len = 0;
+		ret = pmu_queue_request(req);
+		break;
+    }
+    if (ret)
+    {
+    	req->complete = 1;
+    	return ret;
+    }
+    	
+    if (sync) {
+	while (!req->complete)
+		pmu_poll();
+    }
+
+    return 0;
+}
+
+/* Enable/disable autopolling */
+static int 
+pmu_autopoll(int devs)
+{
+	struct adb_request req;
+
+	if (!pmu_fully_inited) return -ENXIO;
+
+	if (devs) {
+		adb_dev_map = devs;
+		pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86,
+			    adb_dev_map >> 8, adb_dev_map);
+		pmu_adb_flags = 2;
+	} else {
+		pmu_request(&req, NULL, 1, PMU_ADB_POLL_OFF);
+		pmu_adb_flags = 0;
+	}
+	while (!req.complete)
+		pmu_poll();
+	return 0;
+}
+
+/* Reset the ADB bus */
+static int 
+pmu_reset_bus(void)
+{
+	struct adb_request req;
+	long timeout;
+	int save_autopoll = adb_dev_map;
+
+	if (!pmu_fully_inited) return -ENXIO;
+
+	/* anyone got a better idea?? */
+	pmu_autopoll(0);
+
+	req.nbytes = 5;
+	req.done = NULL;
+	req.data[0] = PMU_ADB_CMD;
+	req.data[1] = 0;
+	req.data[2] = 3; /* ADB_BUSRESET ??? */
+	req.data[3] = 0;
+	req.data[4] = 0;
+	req.reply_len = 0;
+	req.reply_expected = 1;
+	if (pmu_queue_request(&req) != 0)
+	{
+		printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed\n");
+		return -EIO;
+	}
+	while (!req.complete)
+		pmu_poll();
+	timeout = 100000;
+	while (!req.complete) {
+		if (--timeout < 0) {
+			printk(KERN_ERR "pmu_adb_reset_bus (reset): no response from PMU\n");
+			return -EIO;
+		}
+		udelay(10);
+		pmu_poll();
+	}
+
+	if (save_autopoll != 0)
+		pmu_autopoll(save_autopoll);
+		
+	return 0;
+}
+
+/* Construct and send a pmu request */
+int 
+pmu_request(struct adb_request *req, void (*done)(struct adb_request *),
+	    int nbytes, ...)
+{
+	va_list list;
+	int i;
+
+	if (nbytes < 0 || nbytes > 32) {
+		printk(KERN_ERR "pmu_request: bad nbytes (%d)\n", nbytes);
+		req->complete = 1;
+		return -EINVAL;
+	}
+	req->nbytes = nbytes;
+	req->done = done;
+	va_start(list, nbytes);
+	for (i = 0; i < nbytes; ++i)
+		req->data[i] = va_arg(list, int);
+	va_end(list);
+	if (pmu_data_len[req->data[0]][1] != 0) {
+		req->reply[0] = ADB_RET_OK;
+		req->reply_len = 1;
+	} else
+		req->reply_len = 0;
+	req->reply_expected = 0;
+	return pmu_queue_request(req);
+}
+
+static int 
+pmu_queue_request(struct adb_request *req)
+{
+	unsigned long flags;
+	int nsend;
+
+	if (req->nbytes <= 0) {
+		req->complete = 1;
+		return 0;
+	}
+	nsend = pmu_data_len[req->data[0]][0];
+	if (nsend >= 0 && req->nbytes != nsend + 1) {
+		req->complete = 1;
+		return -EINVAL;
+	}
+
+	req->next = 0;
+	req->sent = 0;
+	req->complete = 0;
+	local_irq_save(flags);
+
+	if (current_req != 0) {
+		last_req->next = req;
+		last_req = req;
+	} else {
+		current_req = req;
+		last_req = req;
+		if (pmu_state == idle)
+			pmu_start();
+	}
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+static void 
+send_byte(int x)
+{
+	via1[ACR] |= SR_CTRL;
+	via1[SR] = x;
+	via2[B] &= ~TREQ;		/* assert TREQ */
+}
+
+static void 
+recv_byte(void)
+{
+	char c;
+
+	via1[ACR] = (via1[ACR] | SR_EXT) & ~SR_OUT;
+	c = via1[SR];		/* resets SR */
+	via2[B] &= ~TREQ;
+}
+
+static void 
+pmu_start(void)
+{
+	unsigned long flags;
+	struct adb_request *req;
+
+	/* assert pmu_state == idle */
+	/* get the packet to send */
+	local_irq_save(flags);
+	req = current_req;
+	if (req == 0 || pmu_state != idle
+	    || (req->reply_expected && req_awaiting_reply))
+		goto out;
+
+	pmu_state = sending;
+	data_index = 1;
+	data_len = pmu_data_len[req->data[0]][0];
+
+	/* set the shift register to shift out and send a byte */
+	send_byte(req->data[0]);
+
+out:
+	local_irq_restore(flags);
+}
+
+void 
+pmu_poll(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (via1[IFR] & SR_INT) {
+		via1[IFR] = SR_INT;
+		pmu_interrupt(IRQ_MAC_ADB_SR, NULL, NULL);
+	}
+	if (via1[IFR] & CB1_INT) {
+		via1[IFR] = CB1_INT;
+		pmu_interrupt(IRQ_MAC_ADB_CL, NULL, NULL);
+	}
+	local_irq_restore(flags);
+}
+
+static irqreturn_t
+pmu_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct adb_request *req;
+	int timeout, bite = 0;	/* to prevent compiler warning */
+
+#if 0
+	printk("pmu_interrupt: irq %d state %d acr %02X, b %02X data_index %d/%d adb_int_pending %d\n",
+		irq, pmu_state, (uint) via1[ACR], (uint) via2[B], data_index, data_len, adb_int_pending);
+#endif
+
+	if (irq == IRQ_MAC_ADB_CL) {		/* CB1 interrupt */
+		adb_int_pending = 1;
+	} else if (irq == IRQ_MAC_ADB_SR) {	/* SR interrupt  */
+		if (via2[B] & TACK) {
+			printk(KERN_DEBUG "PMU: SR_INT but ack still high! (%x)\n", via2[B]);
+		}
+
+		/* if reading grab the byte */
+		if ((via1[ACR] & SR_OUT) == 0) bite = via1[SR];
+
+		/* reset TREQ and wait for TACK to go high */
+		via2[B] |= TREQ;
+		timeout = 3200;
+		while (!(via2[B] & TACK)) {
+			if (--timeout < 0) {
+				printk(KERN_ERR "PMU not responding (!ack)\n");
+				goto finish;
+			}
+			udelay(10);
+		}
+
+		switch (pmu_state) {
+		case sending:
+			req = current_req;
+			if (data_len < 0) {
+				data_len = req->nbytes - 1;
+				send_byte(data_len);
+				break;
+			}
+			if (data_index <= data_len) {
+				send_byte(req->data[data_index++]);
+				break;
+			}
+			req->sent = 1;
+			data_len = pmu_data_len[req->data[0]][1];
+			if (data_len == 0) {
+				pmu_state = idle;
+				current_req = req->next;
+				if (req->reply_expected)
+					req_awaiting_reply = req;
+				else
+					pmu_done(req);
+			} else {
+				pmu_state = reading;
+				data_index = 0;
+				reply_ptr = req->reply + req->reply_len;
+				recv_byte();
+			}
+			break;
+
+		case intack:
+			data_index = 0;
+			data_len = -1;
+			pmu_state = reading_intr;
+			reply_ptr = interrupt_data;
+			recv_byte();
+			break;
+
+		case reading:
+		case reading_intr:
+			if (data_len == -1) {
+				data_len = bite;
+				if (bite > 32)
+					printk(KERN_ERR "PMU: bad reply len %d\n",
+					       bite);
+			} else {
+				reply_ptr[data_index++] = bite;
+			}
+			if (data_index < data_len) {
+				recv_byte();
+				break;
+			}
+
+			if (pmu_state == reading_intr) {
+				pmu_handle_data(interrupt_data, data_index, regs);
+			} else {
+				req = current_req;
+				current_req = req->next;
+				req->reply_len += data_index;
+				pmu_done(req);
+			}
+			pmu_state = idle;
+
+			break;
+
+		default:
+			printk(KERN_ERR "pmu_interrupt: unknown state %d?\n",
+			       pmu_state);
+		}
+	}
+finish:
+	if (pmu_state == idle) {
+		if (adb_int_pending) {
+			pmu_state = intack;
+			send_byte(PMU_INT_ACK);
+			adb_int_pending = 0;
+		} else if (current_req) {
+			pmu_start();
+		}
+	}
+
+#if 0
+	printk("pmu_interrupt: exit state %d acr %02X, b %02X data_index %d/%d adb_int_pending %d\n",
+		pmu_state, (uint) via1[ACR], (uint) via2[B], data_index, data_len, adb_int_pending);
+#endif
+	return IRQ_HANDLED;
+}
+
+static void 
+pmu_done(struct adb_request *req)
+{
+	req->complete = 1;
+	if (req->done)
+		(*req->done)(req);
+}
+
+/* Interrupt data could be the result data from an ADB cmd */
+static void 
+pmu_handle_data(unsigned char *data, int len, struct pt_regs *regs)
+{
+	static int show_pmu_ints = 1;
+
+	asleep = 0;
+	if (len < 1) {
+		adb_int_pending = 0;
+		return;
+	}
+	if (data[0] & PMU_INT_ADB) {
+		if ((data[0] & PMU_INT_ADB_AUTO) == 0) {
+			struct adb_request *req = req_awaiting_reply;
+			if (req == 0) {
+				printk(KERN_ERR "PMU: extra ADB reply\n");
+				return;
+			}
+			req_awaiting_reply = 0;
+			if (len <= 2)
+				req->reply_len = 0;
+			else {
+				memcpy(req->reply, data + 1, len - 1);
+				req->reply_len = len - 1;
+			}
+			pmu_done(req);
+		} else {
+			adb_input(data+1, len-1, regs, 1);
+		}
+	} else {
+		if (data[0] == 0x08 && len == 3) {
+			/* sound/brightness buttons pressed */
+			pmu_set_brightness(data[1] >> 3);
+			set_volume(data[2]);
+		} else if (show_pmu_ints
+			   && !(data[0] == PMU_INT_TICK && len == 1)) {
+			int i;
+			printk(KERN_DEBUG "pmu intr");
+			for (i = 0; i < len; ++i)
+				printk(" %.2x", data[i]);
+			printk("\n");
+		}
+	}
+}
+
+int backlight_level = -1;
+int backlight_enabled = 0;
+
+#define LEVEL_TO_BRIGHT(lev)	((lev) < 1? 0x7f: 0x4a - ((lev) << 1))
+
+static void 
+pmu_enable_backlight(int on)
+{
+	struct adb_request req;
+
+	if (on) {
+	    /* first call: get current backlight value */
+	    if (backlight_level < 0) {
+		switch(pmu_kind) {
+		    case PMU_68K_V1:
+		    case PMU_68K_V2:
+			pmu_request(&req, NULL, 3, PMU_READ_NVRAM, 0x14, 0xe);
+			while (!req.complete)
+				pmu_poll();
+			printk(KERN_DEBUG "pmu: nvram returned bright: %d\n", (int)req.reply[1]);
+			backlight_level = req.reply[1];
+			break;
+		    default:
+		        backlight_enabled = 0;
+		        return;
+		}
+	    }
+	    pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT,
+	    	LEVEL_TO_BRIGHT(backlight_level));
+	    while (!req.complete)
+		pmu_poll();
+	}
+	pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
+	    PMU_POW_BACKLIGHT | (on ? PMU_POW_ON : PMU_POW_OFF));
+	while (!req.complete)
+		pmu_poll();
+	backlight_enabled = on;
+}
+
+static void 
+pmu_set_brightness(int level)
+{
+	int bright;
+
+	backlight_level = level;
+	bright = LEVEL_TO_BRIGHT(level);
+	if (!backlight_enabled)
+		return;
+	if (bright_req_1.complete)
+		pmu_request(&bright_req_1, NULL, 2, PMU_BACKLIGHT_BRIGHT,
+		    bright);
+	if (bright_req_2.complete)
+		pmu_request(&bright_req_2, NULL, 2, PMU_POWER_CTRL,
+		    PMU_POW_BACKLIGHT | (bright < 0x7f ? PMU_POW_ON : PMU_POW_OFF));
+}
+
+void 
+pmu_enable_irled(int on)
+{
+	struct adb_request req;
+
+	pmu_request(&req, NULL, 2, PMU_POWER_CTRL, PMU_POW_IRLED |
+	    (on ? PMU_POW_ON : PMU_POW_OFF));
+	while (!req.complete)
+		pmu_poll();
+}
+
+static void 
+set_volume(int level)
+{
+}
+
+int
+pmu_present(void)
+{
+	return (pmu_kind != PMU_UNKNOWN);
+}
+
+#if 0 /* needs some work for 68K */
+
+/*
+ * This struct is used to store config register values for
+ * PCI devices which may get powered off when we sleep.
+ */
+static struct pci_save {
+	u16	command;
+	u16	cache_lat;
+	u16	intr;
+} *pbook_pci_saves;
+static int n_pbook_pci_saves;
+
+static inline void __openfirmware
+pbook_pci_save(void)
+{
+	int npci;
+	struct pci_dev *pd = NULL;
+	struct pci_save *ps;
+
+	npci = 0;
+	while ((pd = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL)
+		++npci;
+	n_pbook_pci_saves = npci;
+	if (npci == 0)
+		return;
+	ps = (struct pci_save *) kmalloc(npci * sizeof(*ps), GFP_KERNEL);
+	pbook_pci_saves = ps;
+	if (ps == NULL)
+		return;
+
+	pd = NULL;
+	while ((pd = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
+		pci_read_config_word(pd, PCI_COMMAND, &ps->command);
+		pci_read_config_word(pd, PCI_CACHE_LINE_SIZE, &ps->cache_lat);
+		pci_read_config_word(pd, PCI_INTERRUPT_LINE, &ps->intr);
+		++ps;
+		--npci;
+	}
+}
+
+static inline void __openfirmware
+pbook_pci_restore(void)
+{
+	u16 cmd;
+	struct pci_save *ps = pbook_pci_saves;
+	struct pci_dev *pd = NULL;
+	int j;
+
+	while ((pd = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
+		if (ps->command == 0)
+			continue;
+		pci_read_config_word(pd, PCI_COMMAND, &cmd);
+		if ((ps->command & ~cmd) == 0)
+			continue;
+		switch (pd->hdr_type) {
+		case PCI_HEADER_TYPE_NORMAL:
+			for (j = 0; j < 6; ++j)
+				pci_write_config_dword(pd,
+					PCI_BASE_ADDRESS_0 + j*4,
+					pd->resource[j].start);
+			pci_write_config_dword(pd, PCI_ROM_ADDRESS,
+			       pd->resource[PCI_ROM_RESOURCE].start);
+			pci_write_config_word(pd, PCI_CACHE_LINE_SIZE,
+				ps->cache_lat);
+			pci_write_config_word(pd, PCI_INTERRUPT_LINE,
+				ps->intr);
+			pci_write_config_word(pd, PCI_COMMAND, ps->command);
+			break;
+			/* other header types not restored at present */
+		}
+	}
+}
+
+/*
+ * Put the powerbook to sleep.
+ */
+#define IRQ_ENABLE	((unsigned int *)0xf3000024)
+#define MEM_CTRL	((unsigned int *)0xf8000070)
+
+int __openfirmware powerbook_sleep(void)
+{
+	int ret, i, x;
+	static int save_backlight;
+	static unsigned int save_irqen;
+	unsigned long msr;
+	unsigned int hid0;
+	unsigned long p, wait;
+	struct adb_request sleep_req;
+
+	/* Notify device drivers */
+	ret = notifier_call_chain(&sleep_notifier_list, PBOOK_SLEEP, NULL);
+	if (ret & NOTIFY_STOP_MASK)
+		return -EBUSY;
+
+	/* Sync the disks. */
+	/* XXX It would be nice to have some way to ensure that
+	 * nobody is dirtying any new buffers while we wait. */
+	sys_sync();
+
+	/* Turn off the display backlight */
+	save_backlight = backlight_enabled;
+	if (save_backlight)
+		pmu_enable_backlight(0);
+
+	/* Give the disks a little time to actually finish writing */
+	for (wait = jiffies + (HZ/4); time_before(jiffies, wait); )
+		mb();
+
+	/* Disable all interrupts except pmu */
+	save_irqen = in_le32(IRQ_ENABLE);
+	for (i = 0; i < 32; ++i)
+		if (i != vias->intrs[0].line && (save_irqen & (1 << i)))
+			disable_irq(i);
+	asm volatile("mtdec %0" : : "r" (0x7fffffff));
+
+	/* Save the state of PCI config space for some slots */
+	pbook_pci_save();
+
+	/* Set the memory controller to keep the memory refreshed
+	   while we're asleep */
+	for (i = 0x403f; i >= 0x4000; --i) {
+		out_be32(MEM_CTRL, i);
+		do {
+			x = (in_be32(MEM_CTRL) >> 16) & 0x3ff;
+		} while (x == 0);
+		if (x >= 0x100)
+			break;
+	}
+
+	/* Ask the PMU to put us to sleep */
+	pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
+	while (!sleep_req.complete)
+		mb();
+	/* displacement-flush the L2 cache - necessary? */
+	for (p = KERNELBASE; p < KERNELBASE + 0x100000; p += 0x1000)
+		i = *(volatile int *)p;
+	asleep = 1;
+
+	/* Put the CPU into sleep mode */
+	asm volatile("mfspr %0,1008" : "=r" (hid0) :);
+	hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;
+	asm volatile("mtspr 1008,%0" : : "r" (hid0));
+	local_save_flags(msr);
+	msr |= MSR_POW | MSR_EE;
+	local_irq_restore(msr);
+	udelay(10);
+
+	/* OK, we're awake again, start restoring things */
+	out_be32(MEM_CTRL, 0x3f);
+	pbook_pci_restore();
+
+	/* wait for the PMU interrupt sequence to complete */
+	while (asleep)
+		mb();
+
+	/* reenable interrupts */
+	for (i = 0; i < 32; ++i)
+		if (i != vias->intrs[0].line && (save_irqen & (1 << i)))
+			enable_irq(i);
+
+	/* Notify drivers */
+	notifier_call_chain(&sleep_notifier_list, PBOOK_WAKE, NULL);
+
+	/* reenable ADB autopoll */
+	pmu_adb_autopoll(adb_dev_map);
+
+	/* Turn on the screen backlight, if it was on before */
+	if (save_backlight)
+		pmu_enable_backlight(1);
+
+	/* Wait for the hard disk to spin up */
+
+	return 0;
+}
+
+/*
+ * Support for /dev/pmu device
+ */
+static int __openfirmware pmu_open(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+static ssize_t __openfirmware pmu_read(struct file *file, char *buf,
+			size_t count, loff_t *ppos)
+{
+	return 0;
+}
+
+static ssize_t __openfirmware pmu_write(struct file *file, const char *buf,
+			 size_t count, loff_t *ppos)
+{
+	return 0;
+}
+
+/* Note: removed __openfirmware here since it causes link errors */
+static int /*__openfirmware*/ pmu_ioctl(struct inode * inode, struct file *filp,
+		     u_int cmd, u_long arg)
+{
+	int error;
+	__u32 value;
+
+	switch (cmd) {
+	    case PMU_IOC_SLEEP:
+	    	return -ENOSYS;
+	    case PMU_IOC_GET_BACKLIGHT:
+		return put_user(backlight_level, (__u32 *)arg);
+	    case PMU_IOC_SET_BACKLIGHT:
+		error = get_user(value, (__u32 *)arg);
+		if (!error)
+			pmu_set_brightness(value);
+		return error;
+	    case PMU_IOC_GET_MODEL:
+	    	return put_user(pmu_kind, (__u32 *)arg);
+	}
+	return -EINVAL;
+}
+
+static struct file_operations pmu_device_fops = {
+	.read		= pmu_read,
+	.write		= pmu_write,
+	.ioctl		= pmu_ioctl,
+	.open		= pmu_open,
+};
+
+static struct miscdevice pmu_device = {
+	PMU_MINOR, "pmu", &pmu_device_fops
+};
+
+void pmu_device_init(void)
+{
+	if (!via)
+		return;
+	if (misc_register(&pmu_device) < 0)
+		printk(KERN_ERR "via-pmu68k: cannot register misc device.\n");
+}
+#endif /* CONFIG_PMAC_PBOOK */
+