Merge tag 'isdn-removal' of https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground

Arnd Bergmann says:

====================
isdn: deprecate non-mISDN drivers

When isdn4linux came up in the context of another patch series, I
remembered that we had discussed removing it a while ago.

It turns out that the suggestion from Karsten Keil wa to remove I4L
in 2018 after the last public ISDN networks are shut down. This has
happened now (with a very small number of exceptions), so I guess it's
time to try again.

We currently have three ISDN stacks in the kernel: the original
isdn4linux (with the hisax driver), the newer CAPI (with four drivers),
and finally the mISDN stack (supporting roughly the same hardware as
hisax).

As far as I can tell, anyone using ISDN with mainline kernel drivers in
the past few years uses mISDN, and this is typically used for voice-only
PBX installations that don't require a public network.

The older stacks support additional features for data networks, but those
typically make no sense any more if there is no network to connect to.

My proposal for this time is to kill off isdn4linux entirely, as it seems
to have been unusable for quite a while. This code has been abandoned
for many years and it does cause problems for treewide maintenance as
it tends to do everything that we try to stop doing.
Birger Harzenetter mentioned that is is still using i4l in order to
make use of the 'divert' feature that is not part of mISDN, but has
otherwise moved on to mISDN for normal operation, like apparently
everyone else.

CAPI in turn is not quite as obsolete, but two of the drivers (avm
and hysdn) don't seem to be used at all, while another one (gigaset)
will stop being maintained as Paul Bolle is no longer able to
test it after the network gets shut down in September.
All three are now moved into drivers/staging to let others speak
up in case there are remaining users.
This leaves Bluetooth CMTP as the only remaining user of CAPI, but
Marcel Holtmann wishes to keep maintaining it.

For the discussion on version 1, see [2]
Unfortunately, Karsten Keil as the maintainer has not participated in
the discussion.

      Arnd

[1] https://patchwork.kernel.org/patch/8484861/#17900371
[2] https://listserv.isdn4linux.de/pipermail/isdn4linux/2019-April/thread.html
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

14 files changed, 0 insertions, 3755 deletions

diff --git a/drivers/isdn/hysdn/Kconfig b/drivers/isdn/hysdn/Kconfig
deleted file mode 100644
index 1971ef850c9a..000000000000
--- a/drivers/isdn/hysdn/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config HYSDN
-	tristate "Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)"
-	depends on m && PROC_FS && PCI
-	help
-	  Say Y here if you have one of Hypercope's active PCI ISDN cards
-	  Champ, Ergo and Metro. You will then get a module called hysdn.
-	  Please read the file <file:Documentation/isdn/README.hysdn> for more
-	  information.
-
-config HYSDN_CAPI
-	bool "HYSDN CAPI 2.0 support"
-	depends on HYSDN && ISDN_CAPI
-	help
-	  Say Y here if you like to use Hypercope's CAPI 2.0 interface.
diff --git a/drivers/isdn/hysdn/Makefile b/drivers/isdn/hysdn/Makefile
deleted file mode 100644
index e01f17f22ebb..000000000000
--- a/drivers/isdn/hysdn/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Makefile for the hysdn ISDN device driver
-
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_HYSDN)		+= hysdn.o
-
-# Multipart objects.
-
-hysdn-y				:= hysdn_procconf.o hysdn_proclog.o boardergo.o \
-				   hysdn_boot.o hysdn_sched.o hysdn_net.o hysdn_init.o
-hysdn-$(CONFIG_HYSDN_CAPI)	+= hycapi.o
diff --git a/drivers/isdn/hysdn/boardergo.c b/drivers/isdn/hysdn/boardergo.c
deleted file mode 100644
index 2aa2a0e08247..000000000000
--- a/drivers/isdn/hysdn/boardergo.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/* $Id: boardergo.c,v 1.5.6.7 2001/11/06 21:58:19 kai Exp $
- *
- * Linux driver for HYSDN cards, specific routines for ergo type boards.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * As all Linux supported cards Champ2, Ergo and Metro2/4 use the same
- * DPRAM interface and layout with only minor differences all related
- * stuff is done here, not in separate modules.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-#include "hysdn_defs.h"
-#include "boardergo.h"
-
-#define byteout(addr, val) outb(val, addr)
-#define bytein(addr) inb(addr)
-
-/***************************************************/
-/* The cards interrupt handler. Called from system */
-/***************************************************/
-static irqreturn_t
-ergo_interrupt(int intno, void *dev_id)
-{
-	hysdn_card *card = dev_id;	/* parameter from irq */
-	tErgDpram *dpr;
-	unsigned long flags;
-	unsigned char volatile b;
-
-	if (!card)
-		return IRQ_NONE;		/* error -> spurious interrupt */
-	if (!card->irq_enabled)
-		return IRQ_NONE;		/* other device interrupting or irq switched off */
-
-	spin_lock_irqsave(&card->hysdn_lock, flags); /* no further irqs allowed */
-
-	if (!(bytein(card->iobase + PCI9050_INTR_REG) & PCI9050_INTR_REG_STAT1)) {
-		spin_unlock_irqrestore(&card->hysdn_lock, flags);	/* restore old state */
-		return IRQ_NONE;		/* no interrupt requested by E1 */
-	}
-	/* clear any pending ints on the board */
-	dpr = card->dpram;
-	b = dpr->ToPcInt;	/* clear for ergo */
-	b |= dpr->ToPcIntMetro;	/* same for metro */
-	b |= dpr->ToHyInt;	/* and for champ */
-
-	/* start kernel task immediately after leaving all interrupts */
-	if (!card->hw_lock)
-		schedule_work(&card->irq_queue);
-	spin_unlock_irqrestore(&card->hysdn_lock, flags);
-	return IRQ_HANDLED;
-}				/* ergo_interrupt */
-
-/******************************************************************************/
-/* ergo_irq_bh will be called as part of the kernel clearing its shared work  */
-/* queue sometime after a call to schedule_work has been made passing our     */
-/* work_struct. This task is the only one handling data transfer from or to   */
-/* the card after booting. The task may be queued from everywhere             */
-/* (interrupts included).                                                     */
-/******************************************************************************/
-static void
-ergo_irq_bh(struct work_struct *ugli_api)
-{
-	hysdn_card *card = container_of(ugli_api, hysdn_card, irq_queue);
-	tErgDpram *dpr;
-	int again;
-	unsigned long flags;
-
-	if (card->state != CARD_STATE_RUN)
-		return;		/* invalid call */
-
-	dpr = card->dpram;	/* point to DPRAM */
-
-	spin_lock_irqsave(&card->hysdn_lock, flags);
-	if (card->hw_lock) {
-		spin_unlock_irqrestore(&card->hysdn_lock, flags);	/* hardware currently unavailable */
-		return;
-	}
-	card->hw_lock = 1;	/* we now lock the hardware */
-
-	do {
-		again = 0;	/* assume loop not to be repeated */
-
-		if (!dpr->ToHyFlag) {
-			/* we are able to send a buffer */
-
-			if (hysdn_sched_tx(card, dpr->ToHyBuf, &dpr->ToHySize, &dpr->ToHyChannel,
-					   ERG_TO_HY_BUF_SIZE)) {
-				dpr->ToHyFlag = 1;	/* enable tx */
-				again = 1;	/* restart loop */
-			}
-		}		/* we are able to send a buffer */
-		if (dpr->ToPcFlag) {
-			/* a message has arrived for us, handle it */
-
-			if (hysdn_sched_rx(card, dpr->ToPcBuf, dpr->ToPcSize, dpr->ToPcChannel)) {
-				dpr->ToPcFlag = 0;	/* we worked the data */
-				again = 1;	/* restart loop */
-			}
-		}		/* a message has arrived for us */
-		if (again) {
-			dpr->ToHyInt = 1;
-			dpr->ToPcInt = 1;	/* interrupt to E1 for all cards */
-		} else
-			card->hw_lock = 0;	/* free hardware again */
-	} while (again);	/* until nothing more to do */
-
-	spin_unlock_irqrestore(&card->hysdn_lock, flags);
-}				/* ergo_irq_bh */
-
-
-/*********************************************************/
-/* stop the card (hardware reset) and disable interrupts */
-/*********************************************************/
-static void
-ergo_stopcard(hysdn_card *card)
-{
-	unsigned long flags;
-	unsigned char val;
-
-	hysdn_net_release(card);	/* first release the net device if existing */
-#ifdef CONFIG_HYSDN_CAPI
-	hycapi_capi_stop(card);
-#endif /* CONFIG_HYSDN_CAPI */
-	spin_lock_irqsave(&card->hysdn_lock, flags);
-	val = bytein(card->iobase + PCI9050_INTR_REG);	/* get actual value */
-	val &= ~(PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1);	/* mask irq */
-	byteout(card->iobase + PCI9050_INTR_REG, val);
-	card->irq_enabled = 0;
-	byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RESET);	/* reset E1 processor */
-	card->state = CARD_STATE_UNUSED;
-	card->err_log_state = ERRLOG_STATE_OFF;		/* currently no log active */
-
-	spin_unlock_irqrestore(&card->hysdn_lock, flags);
-}				/* ergo_stopcard */
-
-/**************************************************************************/
-/* enable or disable the cards error log. The event is queued if possible */
-/**************************************************************************/
-static void
-ergo_set_errlog_state(hysdn_card *card, int on)
-{
-	unsigned long flags;
-
-	if (card->state != CARD_STATE_RUN) {
-		card->err_log_state = ERRLOG_STATE_OFF;		/* must be off */
-		return;
-	}
-	spin_lock_irqsave(&card->hysdn_lock, flags);
-
-	if (((card->err_log_state == ERRLOG_STATE_OFF) && !on) ||
-	    ((card->err_log_state == ERRLOG_STATE_ON) && on)) {
-		spin_unlock_irqrestore(&card->hysdn_lock, flags);
-		return;		/* nothing to do */
-	}
-	if (on)
-		card->err_log_state = ERRLOG_STATE_START;	/* request start */
-	else
-		card->err_log_state = ERRLOG_STATE_STOP;	/* request stop */
-
-	spin_unlock_irqrestore(&card->hysdn_lock, flags);
-	schedule_work(&card->irq_queue);
-}				/* ergo_set_errlog_state */
-
-/******************************************/
-/* test the cards RAM and return 0 if ok. */
-/******************************************/
-static const char TestText[36] = "This Message is filler, why read it";
-
-static int
-ergo_testram(hysdn_card *card)
-{
-	tErgDpram *dpr = card->dpram;
-
-	memset(dpr->TrapTable, 0, sizeof(dpr->TrapTable));	/* clear all Traps */
-	dpr->ToHyInt = 1;	/* E1 INTR state forced */
-
-	memcpy(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText,
-	       sizeof(TestText));
-	if (memcmp(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText,
-		   sizeof(TestText)))
-		return (-1);
-
-	memcpy(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText,
-	       sizeof(TestText));
-	if (memcmp(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText,
-		   sizeof(TestText)))
-		return (-1);
-
-	return (0);
-}				/* ergo_testram */
-
-/*****************************************************************************/
-/* this function is intended to write stage 1 boot image to the cards buffer */
-/* this is done in two steps. First the 1024 hi-words are written (offs=0),  */
-/* then the 1024 lo-bytes are written. The remaining DPRAM is cleared, the   */
-/* PCI-write-buffers flushed and the card is taken out of reset.             */
-/* The function then waits for a reaction of the E1 processor or a timeout.  */
-/* Negative return values are interpreted as errors.                         */
-/*****************************************************************************/
-static int
-ergo_writebootimg(struct HYSDN_CARD *card, unsigned char *buf,
-		  unsigned long offs)
-{
-	unsigned char *dst;
-	tErgDpram *dpram;
-	int cnt = (BOOT_IMG_SIZE >> 2);		/* number of words to move and swap (byte order!) */
-
-	if (card->debug_flags & LOG_POF_CARD)
-		hysdn_addlog(card, "ERGO: write bootldr offs=0x%lx ", offs);
-
-	dst = card->dpram;	/* pointer to start of DPRAM */
-	dst += (offs + ERG_DPRAM_FILL_SIZE);	/* offset in the DPRAM */
-	while (cnt--) {
-		*dst++ = *(buf + 1);	/* high byte */
-		*dst++ = *buf;	/* low byte */
-		dst += 2;	/* point to next longword */
-		buf += 2;	/* buffer only filled with words */
-	}
-
-	/* if low words (offs = 2) have been written, clear the rest of the DPRAM, */
-	/* flush the PCI-write-buffer and take the E1 out of reset */
-	if (offs) {
-		memset(card->dpram, 0, ERG_DPRAM_FILL_SIZE);	/* fill the DPRAM still not cleared */
-		dpram = card->dpram;	/* get pointer to dpram structure */
-		dpram->ToHyNoDpramErrLog = 0xFF;	/* write a dpram register */
-		while (!dpram->ToHyNoDpramErrLog);	/* reread volatile register to flush PCI */
-
-		byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RUN);	/* start E1 processor */
-		/* the interrupts are still masked */
-
-		msleep_interruptible(20);		/* Timeout 20ms */
-
-		if (((tDpramBootSpooler *) card->dpram)->Len != DPRAM_SPOOLER_DATA_SIZE) {
-			if (card->debug_flags & LOG_POF_CARD)
-				hysdn_addlog(card, "ERGO: write bootldr no answer");
-			return (-ERR_BOOTIMG_FAIL);
-		}
-	}			/* start_boot_img */
-	return (0);		/* successful */
-}				/* ergo_writebootimg */
-
-/********************************************************************************/
-/* ergo_writebootseq writes the buffer containing len bytes to the E1 processor */
-/* using the boot spool mechanism. If everything works fine 0 is returned. In   */
-/* case of errors a negative error value is returned.                           */
-/********************************************************************************/
-static int
-ergo_writebootseq(struct HYSDN_CARD *card, unsigned char *buf, int len)
-{
-	tDpramBootSpooler *sp = (tDpramBootSpooler *) card->dpram;
-	unsigned char *dst;
-	unsigned char buflen;
-	int nr_write;
-	unsigned char tmp_rdptr;
-	unsigned char wr_mirror;
-	int i;
-
-	if (card->debug_flags & LOG_POF_CARD)
-		hysdn_addlog(card, "ERGO: write boot seq len=%d ", len);
-
-	dst = sp->Data;		/* point to data in spool structure */
-	buflen = sp->Len;	/* maximum len of spooled data */
-	wr_mirror = sp->WrPtr;	/* only once read */
-
-	/* try until all bytes written or error */
-	i = 0x1000;		/* timeout value */
-	while (len) {
-
-		/* first determine the number of bytes that may be buffered */
-		do {
-			tmp_rdptr = sp->RdPtr;	/* first read the pointer */
-			i--;	/* decrement timeout */
-		} while (i && (tmp_rdptr != sp->RdPtr));	/* wait for stable pointer */
-
-		if (!i) {
-			if (card->debug_flags & LOG_POF_CARD)
-				hysdn_addlog(card, "ERGO: write boot seq timeout");
-			return (-ERR_BOOTSEQ_FAIL);	/* value not stable -> timeout */
-		}
-		if ((nr_write = tmp_rdptr - wr_mirror - 1) < 0)
-			nr_write += buflen;	/* now we got number of free bytes - 1 in buffer */
-
-		if (!nr_write)
-			continue;	/* no free bytes in buffer */
-
-		if (nr_write > len)
-			nr_write = len;		/* limit if last few bytes */
-		i = 0x1000;	/* reset timeout value */
-
-		/* now we know how much bytes we may put in the puffer */
-		len -= nr_write;	/* we savely could adjust len before output */
-		while (nr_write--) {
-			*(dst + wr_mirror) = *buf++;	/* output one byte */
-			if (++wr_mirror >= buflen)
-				wr_mirror = 0;
-			sp->WrPtr = wr_mirror;	/* announce the next byte to E1 */
-		}		/* while (nr_write) */
-
-	}			/* while (len) */
-	return (0);
-}				/* ergo_writebootseq */
-
-/***********************************************************************************/
-/* ergo_waitpofready waits for a maximum of 10 seconds for the completition of the */
-/* boot process. If the process has been successful 0 is returned otherwise a     */
-/* negative error code is returned.                                                */
-/***********************************************************************************/
-static int
-ergo_waitpofready(struct HYSDN_CARD *card)
-{
-	tErgDpram *dpr = card->dpram;	/* pointer to DPRAM structure */
-	int timecnt = 10000 / 50;	/* timeout is 10 secs max. */
-	unsigned long flags;
-	int msg_size;
-	int i;
-
-	if (card->debug_flags & LOG_POF_CARD)
-		hysdn_addlog(card, "ERGO: waiting for pof ready");
-	while (timecnt--) {
-		/* wait until timeout  */
-
-		if (dpr->ToPcFlag) {
-			/* data has arrived */
-
-			if ((dpr->ToPcChannel != CHAN_SYSTEM) ||
-			    (dpr->ToPcSize < MIN_RDY_MSG_SIZE) ||
-			    (dpr->ToPcSize > MAX_RDY_MSG_SIZE) ||
-			    ((*(unsigned long *) dpr->ToPcBuf) != RDY_MAGIC))
-				break;	/* an error occurred */
-
-			/* Check for additional data delivered during SysReady */
-			msg_size = dpr->ToPcSize - RDY_MAGIC_SIZE;
-			if (msg_size > 0)
-				if (EvalSysrTokData(card, dpr->ToPcBuf + RDY_MAGIC_SIZE, msg_size))
-					break;
-
-			if (card->debug_flags & LOG_POF_RECORD)
-				hysdn_addlog(card, "ERGO: pof boot success");
-			spin_lock_irqsave(&card->hysdn_lock, flags);
-
-			card->state = CARD_STATE_RUN;	/* now card is running */
-			/* enable the cards interrupt */
-			byteout(card->iobase + PCI9050_INTR_REG,
-				bytein(card->iobase + PCI9050_INTR_REG) |
-				(PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1));
-			card->irq_enabled = 1;	/* we are ready to receive interrupts */
-
-			dpr->ToPcFlag = 0;	/* reset data indicator */
-			dpr->ToHyInt = 1;
-			dpr->ToPcInt = 1;	/* interrupt to E1 for all cards */
-
-			spin_unlock_irqrestore(&card->hysdn_lock, flags);
-			if ((hynet_enable & (1 << card->myid))
-			    && (i = hysdn_net_create(card)))
-			{
-				ergo_stopcard(card);
-				card->state = CARD_STATE_BOOTERR;
-				return (i);
-			}
-#ifdef CONFIG_HYSDN_CAPI
-			if ((i = hycapi_capi_create(card))) {
-				printk(KERN_WARNING "HYSDN: failed to create capi-interface.\n");
-			}
-#endif /* CONFIG_HYSDN_CAPI */
-			return (0);	/* success */
-		}		/* data has arrived */
-		msleep_interruptible(50);		/* Timeout 50ms */
-	}			/* wait until timeout */
-
-	if (card->debug_flags & LOG_POF_CARD)
-		hysdn_addlog(card, "ERGO: pof boot ready timeout");
-	return (-ERR_POF_TIMEOUT);
-}				/* ergo_waitpofready */
-
-
-
-/************************************************************************************/
-/* release the cards hardware. Before releasing do a interrupt disable and hardware */
-/* reset. Also unmap dpram.                                                         */
-/* Use only during module release.                                                  */
-/************************************************************************************/
-static void
-ergo_releasehardware(hysdn_card *card)
-{
-	ergo_stopcard(card);	/* first stop the card if not already done */
-	free_irq(card->irq, card);	/* release interrupt */
-	release_region(card->iobase + PCI9050_INTR_REG, 1);	/* release all io ports */
-	release_region(card->iobase + PCI9050_USER_IO, 1);
-	iounmap(card->dpram);
-	card->dpram = NULL;	/* release shared mem */
-}				/* ergo_releasehardware */
-
-
-/*********************************************************************************/
-/* acquire the needed hardware ports and map dpram. If an error occurs a nonzero */
-/* value is returned.                                                            */
-/* Use only during module init.                                                  */
-/*********************************************************************************/
-int
-ergo_inithardware(hysdn_card *card)
-{
-	if (!request_region(card->iobase + PCI9050_INTR_REG, 1, "HYSDN"))
-		return (-1);
-	if (!request_region(card->iobase + PCI9050_USER_IO, 1, "HYSDN")) {
-		release_region(card->iobase + PCI9050_INTR_REG, 1);
-		return (-1);	/* ports already in use */
-	}
-	card->memend = card->membase + ERG_DPRAM_PAGE_SIZE - 1;
-	if (!(card->dpram = ioremap(card->membase, ERG_DPRAM_PAGE_SIZE))) {
-		release_region(card->iobase + PCI9050_INTR_REG, 1);
-		release_region(card->iobase + PCI9050_USER_IO, 1);
-		return (-1);
-	}
-
-	ergo_stopcard(card);	/* disable interrupts */
-	if (request_irq(card->irq, ergo_interrupt, IRQF_SHARED, "HYSDN", card)) {
-		ergo_releasehardware(card); /* return the acquired hardware */
-		return (-1);
-	}
-	/* success, now setup the function pointers */
-	card->stopcard = ergo_stopcard;
-	card->releasehardware = ergo_releasehardware;
-	card->testram = ergo_testram;
-	card->writebootimg = ergo_writebootimg;
-	card->writebootseq = ergo_writebootseq;
-	card->waitpofready = ergo_waitpofready;
-	card->set_errlog_state = ergo_set_errlog_state;
-	INIT_WORK(&card->irq_queue, ergo_irq_bh);
-	spin_lock_init(&card->hysdn_lock);
-
-	return (0);
-}				/* ergo_inithardware */
diff --git a/drivers/isdn/hysdn/boardergo.h b/drivers/isdn/hysdn/boardergo.h
deleted file mode 100644
index e99bd81c4034..000000000000
--- a/drivers/isdn/hysdn/boardergo.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* $Id: boardergo.h,v 1.2.6.1 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, definitions for ergo type boards (buffers..).
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-
-/************************************************/
-/* defines for the dual port memory of the card */
-/************************************************/
-#define ERG_DPRAM_PAGE_SIZE 0x2000	/* DPRAM occupies a 8K page */
-#define BOOT_IMG_SIZE 4096
-#define ERG_DPRAM_FILL_SIZE (ERG_DPRAM_PAGE_SIZE - BOOT_IMG_SIZE)
-
-#define ERG_TO_HY_BUF_SIZE  0x0E00	/* 3072 bytes buffer size to card */
-#define ERG_TO_PC_BUF_SIZE  0x0E00	/* 3072 bytes to PC, too */
-
-/* following DPRAM layout copied from OS2-driver boarderg.h */
-typedef struct ErgDpram_tag {
-	/*0000 */ unsigned char ToHyBuf[ERG_TO_HY_BUF_SIZE];
-	/*0E00 */ unsigned char ToPcBuf[ERG_TO_PC_BUF_SIZE];
-
-	/*1C00 */ unsigned char bSoftUart[SIZE_RSV_SOFT_UART];
-	/* size 0x1B0 */
-
-	/*1DB0 *//* tErrLogEntry */ unsigned char volatile ErrLogMsg[64];
-	/* size 64 bytes */
-	/*1DB0  unsigned long ulErrType;               */
-	/*1DB4  unsigned long ulErrSubtype;            */
-	/*1DB8  unsigned long ucTextSize;              */
-	/*1DB9  unsigned long ucText[ERRLOG_TEXT_SIZE]; *//* ASCIIZ of len ucTextSize-1 */
-	/*1DF0 */
-
-	/*1DF0 */ unsigned short volatile ToHyChannel;
-	/*1DF2 */ unsigned short volatile ToHySize;
-	/*1DF4 */ unsigned char volatile ToHyFlag;
-	/* !=0: msg for Hy waiting */
-	/*1DF5 */ unsigned char volatile ToPcFlag;
-	/* !=0: msg for PC waiting */
-	/*1DF6 */ unsigned short volatile ToPcChannel;
-	/*1DF8 */ unsigned short volatile ToPcSize;
-	/*1DFA */ unsigned char bRes1DBA[0x1E00 - 0x1DFA];
-	/* 6 bytes */
-
-	/*1E00 */ unsigned char bRestOfEntryTbl[0x1F00 - 0x1E00];
-	/*1F00 */ unsigned long TrapTable[62];
-	/*1FF8 */ unsigned char bRes1FF8[0x1FFB - 0x1FF8];
-	/* low part of reset vetor */
-	/*1FFB */ unsigned char ToPcIntMetro;
-	/* notes:
-	 * - metro has 32-bit boot ram - accessing
-	 *   ToPcInt and ToHyInt would be the same;
-	 *   so we moved ToPcInt to 1FFB.
-	 *   Because on the PC side both vars are
-	 *   readonly (reseting on int from E1 to PC),
-	 *   we can read both vars on both cards
-	 *   without destroying anything.
-	 * - 1FFB is the high byte of the reset vector,
-	 *   so E1 side should NOT change this byte
-	 *   when writing!
-	 */
-	/*1FFC */ unsigned char volatile ToHyNoDpramErrLog;
-	/* note: ToHyNoDpramErrLog is used to inform
-	 *       boot loader, not to use DPRAM based
-	 *       ErrLog; when DOS driver is rewritten
-	 *       this becomes obsolete
-	 */
-	/*1FFD */ unsigned char bRes1FFD;
-	/*1FFE */ unsigned char ToPcInt;
-	/* E1_intclear; on CHAMP2: E1_intset   */
-	/*1FFF */ unsigned char ToHyInt;
-	/* E1_intset;   on CHAMP2: E1_intclear */
-} tErgDpram;
-
-/**********************************************/
-/* PCI9050 controller local register offsets: */
-/* copied from boarderg.c                     */
-/**********************************************/
-#define PCI9050_INTR_REG    0x4C	/* Interrupt register */
-#define PCI9050_USER_IO     0x51	/* User I/O  register */
-
-/* bitmask for PCI9050_INTR_REG: */
-#define PCI9050_INTR_REG_EN1    0x01	/* 1= enable (def.), 0= disable */
-#define PCI9050_INTR_REG_POL1   0x02	/* 1= active high (def.), 0= active low */
-#define PCI9050_INTR_REG_STAT1  0x04	/* 1= intr. active, 0= intr. not active (def.) */
-#define PCI9050_INTR_REG_ENPCI  0x40	/* 1= PCI interrupts enable (def.) */
-
-/* bitmask for PCI9050_USER_IO: */
-#define PCI9050_USER_IO_EN3     0x02	/* 1= disable      , 0= enable (def.) */
-#define PCI9050_USER_IO_DIR3    0x04	/* 1= output (def.), 0= input         */
-#define PCI9050_USER_IO_DAT3    0x08	/* 1= high (def.)  , 0= low           */
-
-#define PCI9050_E1_RESET    (PCI9050_USER_IO_DIR3)		/* 0x04 */
-#define PCI9050_E1_RUN      (PCI9050_USER_IO_DAT3 | PCI9050_USER_IO_DIR3)		/* 0x0C */
diff --git a/drivers/isdn/hysdn/hycapi.c b/drivers/isdn/hysdn/hycapi.c
deleted file mode 100644
index a2c15cd7bf67..000000000000
--- a/drivers/isdn/hysdn/hycapi.c
+++ /dev/null
@@ -1,785 +0,0 @@
-/* $Id: hycapi.c,v 1.8.6.4 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, CAPI2.0-Interface.
- *
- * Author    Ulrich Albrecht <u.albrecht@hypercope.de> for Hypercope GmbH
- * Copyright 2000 by Hypercope GmbH
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/slab.h>
-
-#define	VER_DRIVER	0
-#define	VER_CARDTYPE	1
-#define	VER_HWID	2
-#define	VER_SERIAL	3
-#define	VER_OPTION	4
-#define	VER_PROTO	5
-#define	VER_PROFILE	6
-#define	VER_CAPI	7
-
-#include "hysdn_defs.h"
-#include <linux/kernelcapi.h>
-
-static char hycapi_revision[] = "$Revision: 1.8.6.4 $";
-
-unsigned int hycapi_enable = 0xffffffff;
-module_param(hycapi_enable, uint, 0);
-
-typedef struct _hycapi_appl {
-	unsigned int ctrl_mask;
-	capi_register_params rp;
-	struct sk_buff *listen_req[CAPI_MAXCONTR];
-} hycapi_appl;
-
-static hycapi_appl hycapi_applications[CAPI_MAXAPPL];
-
-static u16 hycapi_send_message(struct capi_ctr *ctrl, struct sk_buff *skb);
-
-static inline int _hycapi_appCheck(int app_id, int ctrl_no)
-{
-	if ((ctrl_no <= 0) || (ctrl_no > CAPI_MAXCONTR) || (app_id <= 0) ||
-	   (app_id > CAPI_MAXAPPL))
-	{
-		printk(KERN_ERR "HYCAPI: Invalid request app_id %d for controller %d", app_id, ctrl_no);
-		return -1;
-	}
-	return ((hycapi_applications[app_id - 1].ctrl_mask & (1 << (ctrl_no-1))) != 0);
-}
-
-/******************************
-Kernel-Capi callback reset_ctr
-******************************/
-
-static void
-hycapi_reset_ctr(struct capi_ctr *ctrl)
-{
-	hycapictrl_info *cinfo = ctrl->driverdata;
-
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "HYCAPI hycapi_reset_ctr\n");
-#endif
-	capilib_release(&cinfo->ncci_head);
-	capi_ctr_down(ctrl);
-}
-
-/******************************
-Kernel-Capi callback remove_ctr
-******************************/
-
-static void
-hycapi_remove_ctr(struct capi_ctr *ctrl)
-{
-	int i;
-	hycapictrl_info *cinfo = NULL;
-	hysdn_card *card = NULL;
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "HYCAPI hycapi_remove_ctr\n");
-#endif
-	cinfo = (hycapictrl_info *)(ctrl->driverdata);
-	if (!cinfo) {
-		printk(KERN_ERR "No hycapictrl_info set!");
-		return;
-	}
-	card = cinfo->card;
-	capi_ctr_suspend_output(ctrl);
-	for (i = 0; i < CAPI_MAXAPPL; i++) {
-		if (hycapi_applications[i].listen_req[ctrl->cnr - 1]) {
-			kfree_skb(hycapi_applications[i].listen_req[ctrl->cnr - 1]);
-			hycapi_applications[i].listen_req[ctrl->cnr - 1] = NULL;
-		}
-	}
-	detach_capi_ctr(ctrl);
-	ctrl->driverdata = NULL;
-	kfree(card->hyctrlinfo);
-
-
-	card->hyctrlinfo = NULL;
-}
-
-/***********************************************************
-
-Queue a CAPI-message to the controller.
-
-***********************************************************/
-
-static void
-hycapi_sendmsg_internal(struct capi_ctr *ctrl, struct sk_buff *skb)
-{
-	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
-	hysdn_card *card = cinfo->card;
-
-	spin_lock_irq(&cinfo->lock);
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_send_message\n");
-#endif
-	cinfo->skbs[cinfo->in_idx++] = skb;	/* add to buffer list */
-	if (cinfo->in_idx >= HYSDN_MAX_CAPI_SKB)
-		cinfo->in_idx = 0;	/* wrap around */
-	cinfo->sk_count++;		/* adjust counter */
-	if (cinfo->sk_count >= HYSDN_MAX_CAPI_SKB) {
-		/* inform upper layers we're full */
-		printk(KERN_ERR "HYSDN Card%d: CAPI-buffer overrun!\n",
-		       card->myid);
-		capi_ctr_suspend_output(ctrl);
-	}
-	cinfo->tx_skb = skb;
-	spin_unlock_irq(&cinfo->lock);
-	schedule_work(&card->irq_queue);
-}
-
-/***********************************************************
-hycapi_register_internal
-
-Send down the CAPI_REGISTER-Command to the controller.
-This functions will also be used if the adapter has been rebooted to
-re-register any applications in the private list.
-
-************************************************************/
-
-static void
-hycapi_register_internal(struct capi_ctr *ctrl, __u16 appl,
-			 capi_register_params *rp)
-{
-	char ExtFeatureDefaults[] = "49  /0/0/0/0,*/1,*/2,*/3,*/4,*/5,*/6,*/7,*/8,*/9,*";
-	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
-	hysdn_card *card = cinfo->card;
-	struct sk_buff *skb;
-	__u16 len;
-	__u8 _command = 0xa0, _subcommand = 0x80;
-	__u16 MessageNumber = 0x0000;
-	__u16 MessageBufferSize = 0;
-	int slen = strlen(ExtFeatureDefaults);
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_register_appl\n");
-#endif
-	MessageBufferSize = rp->level3cnt * rp->datablkcnt * rp->datablklen;
-
-	len = CAPI_MSG_BASELEN + 8 + slen + 1;
-	if (!(skb = alloc_skb(len, GFP_ATOMIC))) {
-		printk(KERN_ERR "HYSDN card%d: memory squeeze in hycapi_register_appl\n",
-		       card->myid);
-		return;
-	}
-	skb_put_data(skb, &len, sizeof(__u16));
-	skb_put_data(skb, &appl, sizeof(__u16));
-	skb_put_data(skb, &_command, sizeof(__u8));
-	skb_put_data(skb, &_subcommand, sizeof(__u8));
-	skb_put_data(skb, &MessageNumber, sizeof(__u16));
-	skb_put_data(skb, &MessageBufferSize, sizeof(__u16));
-	skb_put_data(skb, &(rp->level3cnt), sizeof(__u16));
-	skb_put_data(skb, &(rp->datablkcnt), sizeof(__u16));
-	skb_put_data(skb, &(rp->datablklen), sizeof(__u16));
-	skb_put_data(skb, ExtFeatureDefaults, slen);
-	hycapi_applications[appl - 1].ctrl_mask |= (1 << (ctrl->cnr - 1));
-	hycapi_send_message(ctrl, skb);
-}
-
-/************************************************************
-hycapi_restart_internal
-
-After an adapter has been rebootet, re-register all applications and
-send a LISTEN_REQ (if there has been such a thing )
-
-*************************************************************/
-
-static void hycapi_restart_internal(struct capi_ctr *ctrl)
-{
-	int i;
-	struct sk_buff *skb;
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_WARNING "HYSDN: hycapi_restart_internal");
-#endif
-	for (i = 0; i < CAPI_MAXAPPL; i++) {
-		if (_hycapi_appCheck(i + 1, ctrl->cnr) == 1) {
-			hycapi_register_internal(ctrl, i + 1,
-						 &hycapi_applications[i].rp);
-			if (hycapi_applications[i].listen_req[ctrl->cnr - 1]) {
-				skb = skb_copy(hycapi_applications[i].listen_req[ctrl->cnr - 1], GFP_ATOMIC);
-				hycapi_sendmsg_internal(ctrl, skb);
-			}
-		}
-	}
-}
-
-/*************************************************************
-Register an application.
-Error-checking is done for CAPI-compliance.
-
-The application is recorded in the internal list.
-*************************************************************/
-
-static void
-hycapi_register_appl(struct capi_ctr *ctrl, __u16 appl,
-		     capi_register_params *rp)
-{
-	int MaxLogicalConnections = 0, MaxBDataBlocks = 0, MaxBDataLen = 0;
-	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
-	hysdn_card *card = cinfo->card;
-	int chk = _hycapi_appCheck(appl, ctrl->cnr);
-	if (chk < 0) {
-		return;
-	}
-	if (chk == 1) {
-		printk(KERN_INFO "HYSDN: apl %d already registered\n", appl);
-		return;
-	}
-	MaxBDataBlocks = rp->datablkcnt > CAPI_MAXDATAWINDOW ? CAPI_MAXDATAWINDOW : rp->datablkcnt;
-	rp->datablkcnt = MaxBDataBlocks;
-	MaxBDataLen = rp->datablklen < 1024 ? 1024 : rp->datablklen;
-	rp->datablklen = MaxBDataLen;
-
-	MaxLogicalConnections = rp->level3cnt;
-	if (MaxLogicalConnections < 0) {
-		MaxLogicalConnections = card->bchans * -MaxLogicalConnections;
-	}
-	if (MaxLogicalConnections == 0) {
-		MaxLogicalConnections = card->bchans;
-	}
-
-	rp->level3cnt = MaxLogicalConnections;
-	memcpy(&hycapi_applications[appl - 1].rp,
-	       rp, sizeof(capi_register_params));
-}
-
-/*********************************************************************
-
-hycapi_release_internal
-
-Send down a CAPI_RELEASE to the controller.
-*********************************************************************/
-
-static void hycapi_release_internal(struct capi_ctr *ctrl, __u16 appl)
-{
-	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
-	hysdn_card *card = cinfo->card;
-	struct sk_buff *skb;
-	__u16 len;
-	__u8 _command = 0xa1, _subcommand = 0x80;
-	__u16 MessageNumber = 0x0000;
-
-	capilib_release_appl(&cinfo->ncci_head, appl);
-
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_release_appl\n");
-#endif
-	len = CAPI_MSG_BASELEN;
-	if (!(skb = alloc_skb(len, GFP_ATOMIC))) {
-		printk(KERN_ERR "HYSDN card%d: memory squeeze in hycapi_register_appl\n",
-		       card->myid);
-		return;
-	}
-	skb_put_data(skb, &len, sizeof(__u16));
-	skb_put_data(skb, &appl, sizeof(__u16));
-	skb_put_data(skb, &_command, sizeof(__u8));
-	skb_put_data(skb, &_subcommand, sizeof(__u8));
-	skb_put_data(skb, &MessageNumber, sizeof(__u16));
-	hycapi_send_message(ctrl, skb);
-	hycapi_applications[appl - 1].ctrl_mask &= ~(1 << (ctrl->cnr - 1));
-}
-
-/******************************************************************
-hycapi_release_appl
-
-Release the application from the internal list an remove it's
-registration at controller-level
-******************************************************************/
-
-static void
-hycapi_release_appl(struct capi_ctr *ctrl, __u16 appl)
-{
-	int chk;
-
-	chk = _hycapi_appCheck(appl, ctrl->cnr);
-	if (chk < 0) {
-		printk(KERN_ERR "HYCAPI: Releasing invalid appl %d on controller %d\n", appl, ctrl->cnr);
-		return;
-	}
-	if (hycapi_applications[appl - 1].listen_req[ctrl->cnr - 1]) {
-		kfree_skb(hycapi_applications[appl - 1].listen_req[ctrl->cnr - 1]);
-		hycapi_applications[appl - 1].listen_req[ctrl->cnr - 1] = NULL;
-	}
-	if (chk == 1)
-	{
-		hycapi_release_internal(ctrl, appl);
-	}
-}
-
-
-/**************************************************************
-Kill a single controller.
-**************************************************************/
-
-int hycapi_capi_release(hysdn_card *card)
-{
-	hycapictrl_info *cinfo = card->hyctrlinfo;
-	struct capi_ctr *ctrl;
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_capi_release\n");
-#endif
-	if (cinfo) {
-		ctrl = &cinfo->capi_ctrl;
-		hycapi_remove_ctr(ctrl);
-	}
-	return 0;
-}
-
-/**************************************************************
-hycapi_capi_stop
-
-Stop CAPI-Output on a card. (e.g. during reboot)
-***************************************************************/
-
-int hycapi_capi_stop(hysdn_card *card)
-{
-	hycapictrl_info *cinfo = card->hyctrlinfo;
-	struct capi_ctr *ctrl;
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_capi_stop\n");
-#endif
-	if (cinfo) {
-		ctrl = &cinfo->capi_ctrl;
-/*		ctrl->suspend_output(ctrl); */
-		capi_ctr_down(ctrl);
-	}
-	return 0;
-}
-
-/***************************************************************
-hycapi_send_message
-
-Send a message to the controller.
-
-Messages are parsed for their Command/Subcommand-type, and appropriate
-action's are performed.
-
-Note that we have to muck around with a 64Bit-DATA_REQ as there are
-firmware-releases that do not check the MsgLen-Indication!
-
-***************************************************************/
-
-static u16 hycapi_send_message(struct capi_ctr *ctrl, struct sk_buff *skb)
-{
-	__u16 appl_id;
-	int _len, _len2;
-	__u8 msghead[64];
-	hycapictrl_info *cinfo = ctrl->driverdata;
-	u16 retval = CAPI_NOERROR;
-
-	appl_id = CAPIMSG_APPID(skb->data);
-	switch (_hycapi_appCheck(appl_id, ctrl->cnr))
-	{
-	case 0:
-/*			printk(KERN_INFO "Need to register\n"); */
-		hycapi_register_internal(ctrl,
-					 appl_id,
-					 &(hycapi_applications[appl_id - 1].rp));
-		break;
-	case 1:
-		break;
-	default:
-		printk(KERN_ERR "HYCAPI: Controller mixup!\n");
-		retval = CAPI_ILLAPPNR;
-		goto out;
-	}
-	switch (CAPIMSG_CMD(skb->data)) {
-	case CAPI_DISCONNECT_B3_RESP:
-		capilib_free_ncci(&cinfo->ncci_head, appl_id,
-				  CAPIMSG_NCCI(skb->data));
-		break;
-	case CAPI_DATA_B3_REQ:
-		_len = CAPIMSG_LEN(skb->data);
-		if (_len > 22) {
-			_len2 = _len - 22;
-			skb_copy_from_linear_data(skb, msghead, 22);
-			skb_copy_to_linear_data_offset(skb, _len2,
-						       msghead, 22);
-			skb_pull(skb, _len2);
-			CAPIMSG_SETLEN(skb->data, 22);
-			retval = capilib_data_b3_req(&cinfo->ncci_head,
-						     CAPIMSG_APPID(skb->data),
-						     CAPIMSG_NCCI(skb->data),
-						     CAPIMSG_MSGID(skb->data));
-		}
-		break;
-	case CAPI_LISTEN_REQ:
-		if (hycapi_applications[appl_id - 1].listen_req[ctrl->cnr - 1])
-		{
-			kfree_skb(hycapi_applications[appl_id - 1].listen_req[ctrl->cnr - 1]);
-			hycapi_applications[appl_id - 1].listen_req[ctrl->cnr - 1] = NULL;
-		}
-		if (!(hycapi_applications[appl_id  -1].listen_req[ctrl->cnr - 1] = skb_copy(skb, GFP_ATOMIC)))
-		{
-			printk(KERN_ERR "HYSDN: memory squeeze in private_listen\n");
-		}
-		break;
-	default:
-		break;
-	}
-out:
-	if (retval == CAPI_NOERROR)
-		hycapi_sendmsg_internal(ctrl, skb);
-	else
-		dev_kfree_skb_any(skb);
-
-	return retval;
-}
-
-static int hycapi_proc_show(struct seq_file *m, void *v)
-{
-	struct capi_ctr *ctrl = m->private;
-	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
-	hysdn_card *card = cinfo->card;
-	char *s;
-
-	seq_printf(m, "%-16s %s\n", "name", cinfo->cardname);
-	seq_printf(m, "%-16s 0x%x\n", "io", card->iobase);
-	seq_printf(m, "%-16s %d\n", "irq", card->irq);
-
-	switch (card->brdtype) {
-	case BD_PCCARD:  s = "HYSDN Hycard"; break;
-	case BD_ERGO: s = "HYSDN Ergo2"; break;
-	case BD_METRO: s = "HYSDN Metro4"; break;
-	case BD_CHAMP2: s = "HYSDN Champ2";	break;
-	case BD_PLEXUS: s = "HYSDN Plexus30"; break;
-	default: s = "???"; break;
-	}
-	seq_printf(m, "%-16s %s\n", "type", s);
-	if ((s = cinfo->version[VER_DRIVER]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_driver", s);
-	if ((s = cinfo->version[VER_CARDTYPE]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_cardtype", s);
-	if ((s = cinfo->version[VER_SERIAL]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_serial", s);
-
-	seq_printf(m, "%-16s %s\n", "cardname", cinfo->cardname);
-
-	return 0;
-}
-
-/**************************************************************
-hycapi_load_firmware
-
-This does NOT load any firmware, but the callback somehow is needed
-on capi-interface registration.
-
-**************************************************************/
-
-static int hycapi_load_firmware(struct capi_ctr *ctrl, capiloaddata *data)
-{
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_load_firmware\n");
-#endif
-	return 0;
-}
-
-
-static char *hycapi_procinfo(struct capi_ctr *ctrl)
-{
-	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "%s\n", __func__);
-#endif
-	if (!cinfo)
-		return "";
-	sprintf(cinfo->infobuf, "%s %s 0x%x %d %s",
-		cinfo->cardname[0] ? cinfo->cardname : "-",
-		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
-		cinfo->card ? cinfo->card->iobase : 0x0,
-		cinfo->card ? cinfo->card->irq : 0,
-		hycapi_revision
-		);
-	return cinfo->infobuf;
-}
-
-/******************************************************************
-hycapi_rx_capipkt
-
-Receive a capi-message.
-
-All B3_DATA_IND are converted to 64K-extension compatible format.
-New nccis are created if necessary.
-*******************************************************************/
-
-void
-hycapi_rx_capipkt(hysdn_card *card, unsigned char *buf, unsigned short len)
-{
-	struct sk_buff *skb;
-	hycapictrl_info *cinfo = card->hyctrlinfo;
-	struct capi_ctr *ctrl;
-	__u16 ApplId;
-	__u16 MsgLen, info;
-	__u16 len2, CapiCmd;
-	__u32 CP64[2] = {0, 0};
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_rx_capipkt\n");
-#endif
-	if (!cinfo) {
-		return;
-	}
-	ctrl = &cinfo->capi_ctrl;
-	if (len < CAPI_MSG_BASELEN) {
-		printk(KERN_ERR "HYSDN Card%d: invalid CAPI-message, length %d!\n",
-		       card->myid, len);
-		return;
-	}
-	MsgLen = CAPIMSG_LEN(buf);
-	ApplId = CAPIMSG_APPID(buf);
-	CapiCmd = CAPIMSG_CMD(buf);
-
-	if ((CapiCmd == CAPI_DATA_B3_IND) && (MsgLen < 30)) {
-		len2 = len + (30 - MsgLen);
-		if (!(skb = alloc_skb(len2, GFP_ATOMIC))) {
-			printk(KERN_ERR "HYSDN Card%d: incoming packet dropped\n",
-			       card->myid);
-			return;
-		}
-		skb_put_data(skb, buf, MsgLen);
-		skb_put_data(skb, CP64, 2 * sizeof(__u32));
-		skb_put_data(skb, buf + MsgLen, len - MsgLen);
-		CAPIMSG_SETLEN(skb->data, 30);
-	} else {
-		if (!(skb = alloc_skb(len, GFP_ATOMIC))) {
-			printk(KERN_ERR "HYSDN Card%d: incoming packet dropped\n",
-			       card->myid);
-			return;
-		}
-		skb_put_data(skb, buf, len);
-	}
-	switch (CAPIMSG_CMD(skb->data))
-	{
-	case CAPI_CONNECT_B3_CONF:
-/* Check info-field for error-indication: */
-		info = CAPIMSG_U16(skb->data, 12);
-		switch (info)
-		{
-		case 0:
-			capilib_new_ncci(&cinfo->ncci_head, ApplId, CAPIMSG_NCCI(skb->data),
-					 hycapi_applications[ApplId - 1].rp.datablkcnt);
-
-			break;
-		case 0x0001:
-			printk(KERN_ERR "HYSDN Card%d: NCPI not supported by current "
-			       "protocol. NCPI ignored.\n", card->myid);
-			break;
-		case 0x2001:
-			printk(KERN_ERR "HYSDN Card%d: Message not supported in"
-			       " current state\n", card->myid);
-			break;
-		case 0x2002:
-			printk(KERN_ERR "HYSDN Card%d: invalid PLCI\n", card->myid);
-			break;
-		case 0x2004:
-			printk(KERN_ERR "HYSDN Card%d: out of NCCI\n", card->myid);
-			break;
-		case 0x3008:
-			printk(KERN_ERR "HYSDN Card%d: NCPI not supported\n",
-			       card->myid);
-			break;
-		default:
-			printk(KERN_ERR "HYSDN Card%d: Info in CONNECT_B3_CONF: %d\n",
-			       card->myid, info);
-			break;
-		}
-		break;
-	case CAPI_CONNECT_B3_IND:
-		capilib_new_ncci(&cinfo->ncci_head, ApplId,
-				 CAPIMSG_NCCI(skb->data),
-				 hycapi_applications[ApplId - 1].rp.datablkcnt);
-		break;
-	case CAPI_DATA_B3_CONF:
-		capilib_data_b3_conf(&cinfo->ncci_head, ApplId,
-				     CAPIMSG_NCCI(skb->data),
-				     CAPIMSG_MSGID(skb->data));
-		break;
-	default:
-		break;
-	}
-	capi_ctr_handle_message(ctrl, ApplId, skb);
-}
-
-/******************************************************************
-hycapi_tx_capiack
-
-Internally acknowledge a msg sent. This will remove the msg from the
-internal queue.
-
-*******************************************************************/
-
-void hycapi_tx_capiack(hysdn_card *card)
-{
-	hycapictrl_info *cinfo = card->hyctrlinfo;
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_tx_capiack\n");
-#endif
-	if (!cinfo) {
-		return;
-	}
-	spin_lock_irq(&cinfo->lock);
-	kfree_skb(cinfo->skbs[cinfo->out_idx]);		/* free skb */
-	cinfo->skbs[cinfo->out_idx++] = NULL;
-	if (cinfo->out_idx >= HYSDN_MAX_CAPI_SKB)
-		cinfo->out_idx = 0;	/* wrap around */
-
-	if (cinfo->sk_count-- == HYSDN_MAX_CAPI_SKB)	/* dec usage count */
-		capi_ctr_resume_output(&cinfo->capi_ctrl);
-	spin_unlock_irq(&cinfo->lock);
-}
-
-/***************************************************************
-hycapi_tx_capiget(hysdn_card *card)
-
-This is called when polling for messages to SEND.
-
-****************************************************************/
-
-struct sk_buff *
-hycapi_tx_capiget(hysdn_card *card)
-{
-	hycapictrl_info *cinfo = card->hyctrlinfo;
-	if (!cinfo) {
-		return (struct sk_buff *)NULL;
-	}
-	if (!cinfo->sk_count)
-		return (struct sk_buff *)NULL;	/* nothing available */
-
-	return (cinfo->skbs[cinfo->out_idx]);		/* next packet to send */
-}
-
-
-/**********************************************************
-int hycapi_init()
-
-attach the capi-driver to the kernel-capi.
-
-***********************************************************/
-
-int hycapi_init(void)
-{
-	int i;
-	for (i = 0; i < CAPI_MAXAPPL; i++) {
-		memset(&(hycapi_applications[i]), 0, sizeof(hycapi_appl));
-	}
-	return (0);
-}
-
-/**************************************************************
-hycapi_cleanup(void)
-
-detach the capi-driver to the kernel-capi. Actually this should
-free some more ressources. Do that later.
-**************************************************************/
-
-void
-hycapi_cleanup(void)
-{
-}
-
-/********************************************************************
-hycapi_capi_create(hysdn_card *card)
-
-Attach the card with its capi-ctrl.
-*********************************************************************/
-
-static void hycapi_fill_profile(hysdn_card *card)
-{
-	hycapictrl_info *cinfo = NULL;
-	struct capi_ctr *ctrl = NULL;
-	cinfo = card->hyctrlinfo;
-	if (!cinfo) return;
-	ctrl = &cinfo->capi_ctrl;
-	strcpy(ctrl->manu, "Hypercope");
-	ctrl->version.majorversion = 2;
-	ctrl->version.minorversion = 0;
-	ctrl->version.majormanuversion = 3;
-	ctrl->version.minormanuversion = 2;
-	ctrl->profile.ncontroller = card->myid;
-	ctrl->profile.nbchannel = card->bchans;
-	ctrl->profile.goptions = GLOBAL_OPTION_INTERNAL_CONTROLLER |
-		GLOBAL_OPTION_B_CHANNEL_OPERATION;
-	ctrl->profile.support1 =  B1_PROT_64KBIT_HDLC |
-		(card->faxchans ? B1_PROT_T30 : 0) |
-		B1_PROT_64KBIT_TRANSPARENT;
-	ctrl->profile.support2 = B2_PROT_ISO7776 |
-		(card->faxchans ? B2_PROT_T30 : 0) |
-		B2_PROT_TRANSPARENT;
-	ctrl->profile.support3 = B3_PROT_TRANSPARENT |
-		B3_PROT_T90NL |
-		(card->faxchans ? B3_PROT_T30 : 0) |
-		(card->faxchans ? B3_PROT_T30EXT : 0) |
-		B3_PROT_ISO8208;
-}
-
-int
-hycapi_capi_create(hysdn_card *card)
-{
-	hycapictrl_info *cinfo = NULL;
-	struct capi_ctr *ctrl = NULL;
-	int retval;
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_capi_create\n");
-#endif
-	if ((hycapi_enable & (1 << card->myid)) == 0) {
-		return 1;
-	}
-	if (!card->hyctrlinfo) {
-		cinfo = kzalloc(sizeof(hycapictrl_info), GFP_ATOMIC);
-		if (!cinfo) {
-			printk(KERN_WARNING "HYSDN: no memory for capi-ctrl.\n");
-			return -ENOMEM;
-		}
-		card->hyctrlinfo = cinfo;
-		cinfo->card = card;
-		spin_lock_init(&cinfo->lock);
-		INIT_LIST_HEAD(&cinfo->ncci_head);
-
-		switch (card->brdtype) {
-		case BD_PCCARD:  strcpy(cinfo->cardname, "HYSDN Hycard"); break;
-		case BD_ERGO: strcpy(cinfo->cardname, "HYSDN Ergo2"); break;
-		case BD_METRO: strcpy(cinfo->cardname, "HYSDN Metro4"); break;
-		case BD_CHAMP2: strcpy(cinfo->cardname, "HYSDN Champ2"); break;
-		case BD_PLEXUS: strcpy(cinfo->cardname, "HYSDN Plexus30"); break;
-		default: strcpy(cinfo->cardname, "HYSDN ???"); break;
-		}
-
-		ctrl = &cinfo->capi_ctrl;
-		ctrl->driver_name   = "hycapi";
-		ctrl->driverdata    = cinfo;
-		ctrl->register_appl = hycapi_register_appl;
-		ctrl->release_appl  = hycapi_release_appl;
-		ctrl->send_message  = hycapi_send_message;
-		ctrl->load_firmware = hycapi_load_firmware;
-		ctrl->reset_ctr     = hycapi_reset_ctr;
-		ctrl->procinfo      = hycapi_procinfo;
-		ctrl->proc_show     = hycapi_proc_show;
-		strcpy(ctrl->name, cinfo->cardname);
-		ctrl->owner = THIS_MODULE;
-
-		retval = attach_capi_ctr(ctrl);
-		if (retval) {
-			printk(KERN_ERR "hycapi: attach controller failed.\n");
-			return -EBUSY;
-		}
-		/* fill in the blanks: */
-		hycapi_fill_profile(card);
-		capi_ctr_ready(ctrl);
-	} else {
-		/* resume output on stopped ctrl */
-		ctrl = &card->hyctrlinfo->capi_ctrl;
-		hycapi_fill_profile(card);
-		capi_ctr_ready(ctrl);
-		hycapi_restart_internal(ctrl);
-/*		ctrl->resume_output(ctrl); */
-	}
-	return 0;
-}
diff --git a/drivers/isdn/hysdn/hysdn_boot.c b/drivers/isdn/hysdn/hysdn_boot.c
deleted file mode 100644
index ba177c3a621b..000000000000
--- a/drivers/isdn/hysdn/hysdn_boot.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/* $Id: hysdn_boot.c,v 1.4.6.4 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards
- * specific routines for booting and pof handling
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/uaccess.h>
-
-#include "hysdn_defs.h"
-#include "hysdn_pof.h"
-
-/********************************/
-/* defines for pof read handler */
-/********************************/
-#define POF_READ_FILE_HEAD  0
-#define POF_READ_TAG_HEAD   1
-#define POF_READ_TAG_DATA   2
-
-/************************************************************/
-/* definition of boot specific data area. This data is only */
-/* needed during boot and so allocated dynamically.         */
-/************************************************************/
-struct boot_data {
-	unsigned short Cryptor;	/* for use with Decrypt function */
-	unsigned short Nrecs;	/* records remaining in file */
-	unsigned char pof_state;/* actual state of read handler */
-	unsigned char is_crypted;/* card data is crypted */
-	int BufSize;		/* actual number of bytes bufferd */
-	int last_error;		/* last occurred error */
-	unsigned short pof_recid;/* actual pof recid */
-	unsigned long pof_reclen;/* total length of pof record data */
-	unsigned long pof_recoffset;/* actual offset inside pof record */
-	union {
-		unsigned char BootBuf[BOOT_BUF_SIZE];/* buffer as byte count */
-		tPofRecHdr PofRecHdr;	/* header for actual record/chunk */
-		tPofFileHdr PofFileHdr;		/* header from POF file */
-		tPofTimeStamp PofTime;	/* time information */
-	} buf;
-};
-
-/*****************************************************/
-/*  start decryption of successive POF file chuncks.  */
-/*                                                   */
-/*  to be called at start of POF file reading,       */
-/*  before starting any decryption on any POF record. */
-/*****************************************************/
-static void
-StartDecryption(struct boot_data *boot)
-{
-	boot->Cryptor = CRYPT_STARTTERM;
-}				/* StartDecryption */
-
-
-/***************************************************************/
-/* decrypt complete BootBuf                                    */
-/* NOTE: decryption must be applied to all or none boot tags - */
-/*       to HI and LO boot loader and (all) seq tags, because  */
-/*       global Cryptor is started for whole POF.              */
-/***************************************************************/
-static void
-DecryptBuf(struct boot_data *boot, int cnt)
-{
-	unsigned char *bufp = boot->buf.BootBuf;
-
-	while (cnt--) {
-		boot->Cryptor = (boot->Cryptor >> 1) ^ ((boot->Cryptor & 1U) ? CRYPT_FEEDTERM : 0);
-		*bufp++ ^= (unsigned char)boot->Cryptor;
-	}
-}				/* DecryptBuf */
-
-/********************************************************************************/
-/* pof_handle_data executes the required actions dependent on the active record */
-/* id. If successful 0 is returned, a negative value shows an error.           */
-/********************************************************************************/
-static int
-pof_handle_data(hysdn_card *card, int datlen)
-{
-	struct boot_data *boot = card->boot;	/* pointer to boot specific data */
-	long l;
-	unsigned char *imgp;
-	int img_len;
-
-	/* handle the different record types */
-	switch (boot->pof_recid) {
-
-	case TAG_TIMESTMP:
-		if (card->debug_flags & LOG_POF_RECORD)
-			hysdn_addlog(card, "POF created %s", boot->buf.PofTime.DateTimeText);
-		break;
-
-	case TAG_CBOOTDTA:
-		DecryptBuf(boot, datlen);	/* we need to encrypt the buffer */
-		/* fall through */
-	case TAG_BOOTDTA:
-		if (card->debug_flags & LOG_POF_RECORD)
-			hysdn_addlog(card, "POF got %s len=%d offs=0x%lx",
-				     (boot->pof_recid == TAG_CBOOTDTA) ? "CBOOTDATA" : "BOOTDTA",
-				     datlen, boot->pof_recoffset);
-
-		if (boot->pof_reclen != POF_BOOT_LOADER_TOTAL_SIZE) {
-			boot->last_error = EPOF_BAD_IMG_SIZE;	/* invalid length */
-			return (boot->last_error);
-		}
-		imgp = boot->buf.BootBuf;	/* start of buffer */
-		img_len = datlen;	/* maximum length to transfer */
-
-		l = POF_BOOT_LOADER_OFF_IN_PAGE -
-			(boot->pof_recoffset & (POF_BOOT_LOADER_PAGE_SIZE - 1));
-		if (l > 0) {
-			/* buffer needs to be truncated */
-			imgp += l;	/* advance pointer */
-			img_len -= l;	/* adjust len */
-		}
-		/* at this point no special handling for data wrapping over buffer */
-		/* is necessary, because the boot image always will be adjusted to */
-		/* match a page boundary inside the buffer.                        */
-		/* The buffer for the boot image on the card is filled in 2 cycles */
-		/* first the 1024 hi-words are put in the buffer, then the low 1024 */
-		/* word are handled in the same way with different offset.         */
-
-		if (img_len > 0) {
-			/* data available for copy */
-			if ((boot->last_error =
-			     card->writebootimg(card, imgp,
-						(boot->pof_recoffset > POF_BOOT_LOADER_PAGE_SIZE) ? 2 : 0)) < 0)
-				return (boot->last_error);
-		}
-		break;	/* end of case boot image hi/lo */
-
-	case TAG_CABSDATA:
-		DecryptBuf(boot, datlen);	/* we need to encrypt the buffer */
-		/* fall through */
-	case TAG_ABSDATA:
-		if (card->debug_flags & LOG_POF_RECORD)
-			hysdn_addlog(card, "POF got %s len=%d offs=0x%lx",
-				     (boot->pof_recid == TAG_CABSDATA) ? "CABSDATA" : "ABSDATA",
-				     datlen, boot->pof_recoffset);
-
-		if ((boot->last_error = card->writebootseq(card, boot->buf.BootBuf, datlen)) < 0)
-			return (boot->last_error);	/* error writing data */
-
-		if (boot->pof_recoffset + datlen >= boot->pof_reclen)
-			return (card->waitpofready(card));	/* data completely spooled, wait for ready */
-
-		break;	/* end of case boot seq data */
-
-	default:
-		if (card->debug_flags & LOG_POF_RECORD)
-			hysdn_addlog(card, "POF got data(id=0x%lx) len=%d offs=0x%lx", boot->pof_recid,
-				     datlen, boot->pof_recoffset);
-
-		break;	/* simply skip record */
-	}			/* switch boot->pof_recid */
-
-	return (0);
-}				/* pof_handle_data */
-
-
-/******************************************************************************/
-/* pof_write_buffer is called when the buffer has been filled with the needed */
-/* number of data bytes. The number delivered is additionally supplied for    */
-/* verification. The functions handles the data and returns the needed number */
-/* of bytes for the next action. If the returned value is 0 or less an error  */
-/* occurred and booting must be aborted.                                       */
-/******************************************************************************/
-int
-pof_write_buffer(hysdn_card *card, int datlen)
-{
-	struct boot_data *boot = card->boot;	/* pointer to boot specific data */
-
-	if (!boot)
-		return (-EFAULT);	/* invalid call */
-	if (boot->last_error < 0)
-		return (boot->last_error);	/* repeated error */
-
-	if (card->debug_flags & LOG_POF_WRITE)
-		hysdn_addlog(card, "POF write: got %d bytes ", datlen);
-
-	switch (boot->pof_state) {
-	case POF_READ_FILE_HEAD:
-		if (card->debug_flags & LOG_POF_WRITE)
-			hysdn_addlog(card, "POF write: checking file header");
-
-		if (datlen != sizeof(tPofFileHdr)) {
-			boot->last_error = -EPOF_INTERNAL;
-			break;
-		}
-		if (boot->buf.PofFileHdr.Magic != TAGFILEMAGIC) {
-			boot->last_error = -EPOF_BAD_MAGIC;
-			break;
-		}
-		/* Setup the new state and vars */
-		boot->Nrecs = (unsigned short)(boot->buf.PofFileHdr.N_PofRecs);	/* limited to 65535 */
-		boot->pof_state = POF_READ_TAG_HEAD;	/* now start with single tags */
-		boot->last_error = sizeof(tPofRecHdr);	/* new length */
-		break;
-
-	case POF_READ_TAG_HEAD:
-		if (card->debug_flags & LOG_POF_WRITE)
-			hysdn_addlog(card, "POF write: checking tag header");
-
-		if (datlen != sizeof(tPofRecHdr)) {
-			boot->last_error = -EPOF_INTERNAL;
-			break;
-		}
-		boot->pof_recid = boot->buf.PofRecHdr.PofRecId;		/* actual pof recid */
-		boot->pof_reclen = boot->buf.PofRecHdr.PofRecDataLen;	/* total length */
-		boot->pof_recoffset = 0;	/* no starting offset */
-
-		if (card->debug_flags & LOG_POF_RECORD)
-			hysdn_addlog(card, "POF: got record id=0x%lx length=%ld ",
-				     boot->pof_recid, boot->pof_reclen);
-
-		boot->pof_state = POF_READ_TAG_DATA;	/* now start with tag data */
-		if (boot->pof_reclen < BOOT_BUF_SIZE)
-			boot->last_error = boot->pof_reclen;	/* limit size */
-		else
-			boot->last_error = BOOT_BUF_SIZE;	/* maximum */
-
-		if (!boot->last_error) {	/* no data inside record */
-			boot->pof_state = POF_READ_TAG_HEAD;	/* now start with single tags */
-			boot->last_error = sizeof(tPofRecHdr);	/* new length */
-		}
-		break;
-
-	case POF_READ_TAG_DATA:
-		if (card->debug_flags & LOG_POF_WRITE)
-			hysdn_addlog(card, "POF write: getting tag data");
-
-		if (datlen != boot->last_error) {
-			boot->last_error = -EPOF_INTERNAL;
-			break;
-		}
-		if ((boot->last_error = pof_handle_data(card, datlen)) < 0)
-			return (boot->last_error);	/* an error occurred */
-		boot->pof_recoffset += datlen;
-		if (boot->pof_recoffset >= boot->pof_reclen) {
-			boot->pof_state = POF_READ_TAG_HEAD;	/* now start with single tags */
-			boot->last_error = sizeof(tPofRecHdr);	/* new length */
-		} else {
-			if (boot->pof_reclen - boot->pof_recoffset < BOOT_BUF_SIZE)
-				boot->last_error = boot->pof_reclen - boot->pof_recoffset;	/* limit size */
-			else
-				boot->last_error = BOOT_BUF_SIZE;	/* maximum */
-		}
-		break;
-
-	default:
-		boot->last_error = -EPOF_INTERNAL;	/* unknown state */
-		break;
-	}			/* switch (boot->pof_state) */
-
-	return (boot->last_error);
-}				/* pof_write_buffer */
-
-
-/*******************************************************************************/
-/* pof_write_open is called when an open for boot on the cardlog device occurs. */
-/* The function returns the needed number of bytes for the next operation. If  */
-/* the returned number is less or equal 0 an error specified by this code      */
-/* occurred. Additionally the pointer to the buffer data area is set on success */
-/*******************************************************************************/
-int
-pof_write_open(hysdn_card *card, unsigned char **bufp)
-{
-	struct boot_data *boot;	/* pointer to boot specific data */
-
-	if (card->boot) {
-		if (card->debug_flags & LOG_POF_OPEN)
-			hysdn_addlog(card, "POF open: already opened for boot");
-		return (-ERR_ALREADY_BOOT);	/* boot already active */
-	}
-	/* error no mem available */
-	if (!(boot = kzalloc(sizeof(struct boot_data), GFP_KERNEL))) {
-		if (card->debug_flags & LOG_MEM_ERR)
-			hysdn_addlog(card, "POF open: unable to allocate mem");
-		return (-EFAULT);
-	}
-	card->boot = boot;
-	card->state = CARD_STATE_BOOTING;
-
-	card->stopcard(card);	/* first stop the card */
-	if (card->testram(card)) {
-		if (card->debug_flags & LOG_POF_OPEN)
-			hysdn_addlog(card, "POF open: DPRAM test failure");
-		boot->last_error = -ERR_BOARD_DPRAM;
-		card->state = CARD_STATE_BOOTERR;	/* show boot error */
-		return (boot->last_error);
-	}
-	boot->BufSize = 0;	/* Buffer is empty */
-	boot->pof_state = POF_READ_FILE_HEAD;	/* read file header */
-	StartDecryption(boot);	/* if POF File should be encrypted */
-
-	if (card->debug_flags & LOG_POF_OPEN)
-		hysdn_addlog(card, "POF open: success");
-
-	*bufp = boot->buf.BootBuf;	/* point to buffer */
-	return (sizeof(tPofFileHdr));
-}				/* pof_write_open */
-
-/********************************************************************************/
-/* pof_write_close is called when an close of boot on the cardlog device occurs. */
-/* The return value must be 0 if everything has happened as desired.            */
-/********************************************************************************/
-int
-pof_write_close(hysdn_card *card)
-{
-	struct boot_data *boot = card->boot;	/* pointer to boot specific data */
-
-	if (!boot)
-		return (-EFAULT);	/* invalid call */
-
-	card->boot = NULL;	/* no boot active */
-	kfree(boot);
-
-	if (card->state == CARD_STATE_RUN)
-		card->set_errlog_state(card, 1);	/* activate error log */
-
-	if (card->debug_flags & LOG_POF_OPEN)
-		hysdn_addlog(card, "POF close: success");
-
-	return (0);
-}				/* pof_write_close */
-
-/*********************************************************************************/
-/* EvalSysrTokData checks additional records delivered with the Sysready Message */
-/* when POF has been booted. A return value of 0 is used if no error occurred.    */
-/*********************************************************************************/
-int
-EvalSysrTokData(hysdn_card *card, unsigned char *cp, int len)
-{
-	u_char *p;
-	u_char crc;
-
-	if (card->debug_flags & LOG_POF_RECORD)
-		hysdn_addlog(card, "SysReady Token data length %d", len);
-
-	if (len < 2) {
-		hysdn_addlog(card, "SysReady Token Data to short");
-		return (1);
-	}
-	for (p = cp, crc = 0; p < (cp + len - 2); p++)
-		if ((crc & 0x80))
-			crc = (((u_char) (crc << 1)) + 1) + *p;
-		else
-			crc = ((u_char) (crc << 1)) + *p;
-	crc = ~crc;
-	if (crc != *(cp + len - 1)) {
-		hysdn_addlog(card, "SysReady Token Data invalid CRC");
-		return (1);
-	}
-	len--;			/* don't check CRC byte */
-	while (len > 0) {
-
-		if (*cp == SYSR_TOK_END)
-			return (0);	/* End of Token stream */
-
-		if (len < (*(cp + 1) + 2)) {
-			hysdn_addlog(card, "token 0x%x invalid length %d", *cp, *(cp + 1));
-			return (1);
-		}
-		switch (*cp) {
-		case SYSR_TOK_B_CHAN:	/* 1 */
-			if (*(cp + 1) != 1)
-				return (1);	/* length invalid */
-			card->bchans = *(cp + 2);
-			break;
-
-		case SYSR_TOK_FAX_CHAN:	/* 2 */
-			if (*(cp + 1) != 1)
-				return (1);	/* length invalid */
-			card->faxchans = *(cp + 2);
-			break;
-
-		case SYSR_TOK_MAC_ADDR:	/* 3 */
-			if (*(cp + 1) != 6)
-				return (1);	/* length invalid */
-			memcpy(card->mac_addr, cp + 2, 6);
-			break;
-
-		default:
-			hysdn_addlog(card, "unknown token 0x%02x length %d", *cp, *(cp + 1));
-			break;
-		}
-		len -= (*(cp + 1) + 2);		/* adjust len */
-		cp += (*(cp + 1) + 2);	/* and pointer */
-	}
-
-	hysdn_addlog(card, "no end token found");
-	return (1);
-}				/* EvalSysrTokData */
diff --git a/drivers/isdn/hysdn/hysdn_defs.h b/drivers/isdn/hysdn/hysdn_defs.h
deleted file mode 100644
index cdac46a21692..000000000000
--- a/drivers/isdn/hysdn/hysdn_defs.h
+++ /dev/null
@@ -1,282 +0,0 @@
-/* $Id: hysdn_defs.h,v 1.5.6.3 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards
- * global definitions and exported vars and functions.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef HYSDN_DEFS_H
-#define HYSDN_DEFS_H
-
-#include <linux/hysdn_if.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/skbuff.h>
-
-#include "ince1pc.h"
-
-#ifdef CONFIG_HYSDN_CAPI
-#include <linux/capi.h>
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-#include <linux/isdn/capilli.h>
-
-/***************************/
-/*   CAPI-Profile values.  */
-/***************************/
-
-#define GLOBAL_OPTION_INTERNAL_CONTROLLER 0x0001
-#define GLOBAL_OPTION_EXTERNAL_CONTROLLER 0x0002
-#define GLOBAL_OPTION_HANDSET             0x0004
-#define GLOBAL_OPTION_DTMF                0x0008
-#define GLOBAL_OPTION_SUPPL_SERVICES      0x0010
-#define GLOBAL_OPTION_CHANNEL_ALLOCATION  0x0020
-#define GLOBAL_OPTION_B_CHANNEL_OPERATION 0x0040
-
-#define B1_PROT_64KBIT_HDLC        0x0001
-#define B1_PROT_64KBIT_TRANSPARENT 0x0002
-#define B1_PROT_V110_ASYNCH        0x0004
-#define B1_PROT_V110_SYNCH         0x0008
-#define B1_PROT_T30                0x0010
-#define B1_PROT_64KBIT_INV_HDLC    0x0020
-#define B1_PROT_56KBIT_TRANSPARENT 0x0040
-
-#define B2_PROT_ISO7776            0x0001
-#define B2_PROT_TRANSPARENT        0x0002
-#define B2_PROT_SDLC               0x0004
-#define B2_PROT_LAPD               0x0008
-#define B2_PROT_T30                0x0010
-#define B2_PROT_PPP                0x0020
-#define B2_PROT_TRANSPARENT_IGNORE_B1_FRAMING_ERRORS 0x0040
-
-#define B3_PROT_TRANSPARENT        0x0001
-#define B3_PROT_T90NL              0x0002
-#define B3_PROT_ISO8208            0x0004
-#define B3_PROT_X25_DCE            0x0008
-#define B3_PROT_T30                0x0010
-#define B3_PROT_T30EXT             0x0020
-
-#define HYSDN_MAXVERSION		8
-
-/* Number of sendbuffers in CAPI-queue */
-#define HYSDN_MAX_CAPI_SKB             20
-
-#endif /* CONFIG_HYSDN_CAPI*/
-
-/************************************************/
-/* constants and bits for debugging/log outputs */
-/************************************************/
-#define LOG_MAX_LINELEN 120
-#define DEB_OUT_SYSLOG  0x80000000	/* output to syslog instead of proc fs */
-#define LOG_MEM_ERR     0x00000001	/* log memory errors like kmalloc failure */
-#define LOG_POF_OPEN    0x00000010	/* log pof open and close activities */
-#define LOG_POF_RECORD  0x00000020	/* log pof record parser */
-#define LOG_POF_WRITE   0x00000040	/* log detailed pof write operation */
-#define LOG_POF_CARD    0x00000080	/* log pof related card functions */
-#define LOG_CNF_LINE    0x00000100	/* all conf lines are put to procfs */
-#define LOG_CNF_DATA    0x00000200	/* non comment conf lines are shown with channel */
-#define LOG_CNF_MISC    0x00000400	/* additional conf line debug outputs */
-#define LOG_SCHED_ASYN  0x00001000	/* debug schedulers async tx routines */
-#define LOG_PROC_OPEN   0x00100000	/* open and close from procfs are logged */
-#define LOG_PROC_ALL    0x00200000	/* all actions from procfs are logged */
-#define LOG_NET_INIT    0x00010000	/* network init and deinit logging */
-
-#define DEF_DEB_FLAGS   0x7fff000f	/* everything is logged to procfs */
-
-/**********************************/
-/* proc filesystem name constants */
-/**********************************/
-#define PROC_SUBDIR_NAME "hysdn"
-#define PROC_CONF_BASENAME "cardconf"
-#define PROC_LOG_BASENAME "cardlog"
-
-/***********************************/
-/* PCI 32 bit parms for IO and MEM */
-/***********************************/
-#define PCI_REG_PLX_MEM_BASE    0
-#define PCI_REG_PLX_IO_BASE     1
-#define PCI_REG_MEMORY_BASE     3
-
-/**************/
-/* card types */
-/**************/
-#define BD_NONE         0U
-#define BD_PERFORMANCE  1U
-#define BD_VALUE        2U
-#define BD_PCCARD       3U
-#define BD_ERGO         4U
-#define BD_METRO        5U
-#define BD_CHAMP2       6U
-#define BD_PLEXUS       7U
-
-/******************************************************/
-/* defined states for cards shown by reading cardconf */
-/******************************************************/
-#define CARD_STATE_UNUSED   0	/* never been used or booted */
-#define CARD_STATE_BOOTING  1	/* booting is in progress */
-#define CARD_STATE_BOOTERR  2	/* a previous boot was aborted */
-#define CARD_STATE_RUN      3	/* card is active */
-
-/*******************************/
-/* defines for error_log_state */
-/*******************************/
-#define ERRLOG_STATE_OFF   0	/* error log is switched off, nothing to do */
-#define ERRLOG_STATE_ON    1	/* error log is switched on, wait for data */
-#define ERRLOG_STATE_START 2	/* start error logging */
-#define ERRLOG_STATE_STOP  3	/* stop error logging */
-
-/*******************************/
-/* data structure for one card */
-/*******************************/
-typedef struct HYSDN_CARD {
-
-	/* general variables for the cards */
-	int myid;		/* own driver card id */
-	unsigned char bus;	/* pci bus the card is connected to */
-	unsigned char devfn;	/* slot+function bit encoded */
-	unsigned short subsysid;/* PCI subsystem id */
-	unsigned char brdtype;	/* type of card */
-	unsigned int bchans;	/* number of available B-channels */
-	unsigned int faxchans;	/* number of available fax-channels */
-	unsigned char mac_addr[6];/* MAC Address read from card */
-	unsigned int irq;	/* interrupt number */
-	unsigned int iobase;	/* IO-port base address */
-	unsigned long plxbase;	/* PLX memory base */
-	unsigned long membase;	/* DPRAM memory base */
-	unsigned long memend;	/* DPRAM memory end */
-	void *dpram;		/* mapped dpram */
-	int state;		/* actual state of card -> CARD_STATE_** */
-	struct HYSDN_CARD *next;	/* pointer to next card */
-
-	/* data areas for the /proc file system */
-	void *proclog;		/* pointer to proclog filesystem specific data */
-	void *procconf;		/* pointer to procconf filesystem specific data */
-
-	/* debugging and logging */
-	unsigned char err_log_state;/* actual error log state of the card */
-	unsigned long debug_flags;/* tells what should be debugged and where */
-	void (*set_errlog_state) (struct HYSDN_CARD *, int);
-
-	/* interrupt handler + interrupt synchronisation */
-	struct work_struct irq_queue;	/* interrupt task queue */
-	unsigned char volatile irq_enabled;/* interrupt enabled if != 0 */
-	unsigned char volatile hw_lock;/* hardware is currently locked -> no access */
-
-	/* boot process */
-	void *boot;		/* pointer to boot private data */
-	int (*writebootimg) (struct HYSDN_CARD *, unsigned char *, unsigned long);
-	int (*writebootseq) (struct HYSDN_CARD *, unsigned char *, int);
-	int (*waitpofready) (struct HYSDN_CARD *);
-	int (*testram) (struct HYSDN_CARD *);
-
-	/* scheduler for data transfer (only async parts) */
-	unsigned char async_data[256];/* async data to be sent (normally for config) */
-	unsigned short volatile async_len;/* length of data to sent */
-	unsigned short volatile async_channel;/* channel number for async transfer */
-	int volatile async_busy;	/* flag != 0 sending in progress */
-	int volatile net_tx_busy;	/* a network packet tx is in progress */
-
-	/* network interface */
-	void *netif;		/* pointer to network structure */
-
-	/* init and deinit stopcard for booting, too */
-	void (*stopcard) (struct HYSDN_CARD *);
-	void (*releasehardware) (struct HYSDN_CARD *);
-
-	spinlock_t hysdn_lock;
-#ifdef CONFIG_HYSDN_CAPI
-	struct hycapictrl_info {
-		char cardname[32];
-		spinlock_t lock;
-		int versionlen;
-		char versionbuf[1024];
-		char *version[HYSDN_MAXVERSION];
-
-		char infobuf[128];	/* for function procinfo */
-
-		struct HYSDN_CARD  *card;
-		struct capi_ctr capi_ctrl;
-		struct sk_buff *skbs[HYSDN_MAX_CAPI_SKB];
-		int in_idx, out_idx;	/* indexes to buffer ring */
-		int sk_count;		/* number of buffers currently in ring */
-		struct sk_buff *tx_skb;	/* buffer for tx operation */
-
-		struct list_head ncci_head;
-	} *hyctrlinfo;
-#endif /* CONFIG_HYSDN_CAPI */
-} hysdn_card;
-
-#ifdef CONFIG_HYSDN_CAPI
-typedef struct hycapictrl_info hycapictrl_info;
-#endif /* CONFIG_HYSDN_CAPI */
-
-
-/*****************/
-/* exported vars */
-/*****************/
-extern hysdn_card *card_root;	/* pointer to first card */
-
-
-
-/*************************/
-/* im/exported functions */
-/*************************/
-
-/* hysdn_procconf.c */
-extern int hysdn_procconf_init(void);	/* init proc config filesys */
-extern void hysdn_procconf_release(void);	/* deinit proc config filesys */
-
-/* hysdn_proclog.c */
-extern int hysdn_proclog_init(hysdn_card *);	/* init proc log entry */
-extern void hysdn_proclog_release(hysdn_card *);	/* deinit proc log entry */
-extern void hysdn_addlog(hysdn_card *, char *, ...);	/* output data to log */
-extern void hysdn_card_errlog(hysdn_card *, tErrLogEntry *, int);	/* output card log */
-
-/* boardergo.c */
-extern int ergo_inithardware(hysdn_card *card);	/* get hardware -> module init */
-
-/* hysdn_boot.c */
-extern int pof_write_close(hysdn_card *);	/* close proc file after writing pof */
-extern int pof_write_open(hysdn_card *, unsigned char **);	/* open proc file for writing pof */
-extern int pof_write_buffer(hysdn_card *, int);		/* write boot data to card */
-extern int EvalSysrTokData(hysdn_card *, unsigned char *, int);		/* Check Sysready Token Data */
-
-/* hysdn_sched.c */
-extern int hysdn_sched_tx(hysdn_card *, unsigned char *,
-			  unsigned short volatile *, unsigned short volatile *,
-			  unsigned short);
-extern int hysdn_sched_rx(hysdn_card *, unsigned char *, unsigned short,
-			  unsigned short);
-extern int hysdn_tx_cfgline(hysdn_card *, unsigned char *,
-			    unsigned short);	/* send one cfg line */
-
-/* hysdn_net.c */
-extern unsigned int hynet_enable;
-extern int hysdn_net_create(hysdn_card *);	/* create a new net device */
-extern int hysdn_net_release(hysdn_card *);	/* delete the device */
-extern char *hysdn_net_getname(hysdn_card *);	/* get name of net interface */
-extern void hysdn_tx_netack(hysdn_card *);	/* acknowledge a packet tx */
-extern struct sk_buff *hysdn_tx_netget(hysdn_card *);	/* get next network packet */
-extern void hysdn_rx_netpkt(hysdn_card *, unsigned char *,
-			    unsigned short);	/* rxed packet from network */
-
-#ifdef CONFIG_HYSDN_CAPI
-extern unsigned int hycapi_enable;
-extern int hycapi_capi_create(hysdn_card *);	/* create a new capi device */
-extern int hycapi_capi_release(hysdn_card *);	/* delete the device */
-extern int hycapi_capi_stop(hysdn_card *card);   /* suspend */
-extern void hycapi_rx_capipkt(hysdn_card *card, unsigned char *buf,
-			      unsigned short len);
-extern void hycapi_tx_capiack(hysdn_card *card);
-extern struct sk_buff *hycapi_tx_capiget(hysdn_card *card);
-extern int hycapi_init(void);
-extern void hycapi_cleanup(void);
-#endif /* CONFIG_HYSDN_CAPI */
-
-#endif /* HYSDN_DEFS_H */
diff --git a/drivers/isdn/hysdn/hysdn_init.c b/drivers/isdn/hysdn/hysdn_init.c
deleted file mode 100644
index 0db2f7506250..000000000000
--- a/drivers/isdn/hysdn/hysdn_init.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/* $Id: hysdn_init.c,v 1.6.6.6 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, init functions.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-
-#include "hysdn_defs.h"
-
-static struct pci_device_id hysdn_pci_tbl[] = {
-	{ PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX,
-	  PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_METRO, 0, 0, BD_METRO },
-	{ PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX,
-	  PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2, 0, 0, BD_CHAMP2 },
-	{ PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX,
-	  PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_ERGO, 0, 0, BD_ERGO },
-	{ PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX,
-	  PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO, 0, 0, BD_ERGO },
-
-	{ }				/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(pci, hysdn_pci_tbl);
-MODULE_DESCRIPTION("ISDN4Linux: Driver for HYSDN cards");
-MODULE_AUTHOR("Werner Cornelius");
-MODULE_LICENSE("GPL");
-
-static int cardmax;		/* number of found cards */
-hysdn_card *card_root = NULL;	/* pointer to first card */
-static hysdn_card *card_last = NULL;	/* pointer to first card */
-
-
-/****************************************************************************/
-/* The module startup and shutdown code. Only compiled when used as module. */
-/* Using the driver as module is always advisable, because the booting      */
-/* image becomes smaller and the driver code is only loaded when needed.    */
-/* Additionally newer versions may be activated without rebooting.          */
-/****************************************************************************/
-
-/****************************************************************************/
-/* init_module is called once when the module is loaded to do all necessary */
-/* things like autodetect...                                                */
-/* If the return value of this function is 0 the init has been successful   */
-/* and the module is added to the list in /proc/modules, otherwise an error */
-/* is assumed and the module will not be kept in memory.                    */
-/****************************************************************************/
-
-static int hysdn_pci_init_one(struct pci_dev *akt_pcidev,
-			      const struct pci_device_id *ent)
-{
-	hysdn_card *card;
-	int rc;
-
-	rc = pci_enable_device(akt_pcidev);
-	if (rc)
-		return rc;
-
-	if (!(card = kzalloc(sizeof(hysdn_card), GFP_KERNEL))) {
-		printk(KERN_ERR "HYSDN: unable to alloc device mem \n");
-		rc = -ENOMEM;
-		goto err_out;
-	}
-	card->myid = cardmax;	/* set own id */
-	card->bus = akt_pcidev->bus->number;
-	card->devfn = akt_pcidev->devfn;	/* slot + function */
-	card->subsysid = akt_pcidev->subsystem_device;
-	card->irq = akt_pcidev->irq;
-	card->iobase = pci_resource_start(akt_pcidev, PCI_REG_PLX_IO_BASE);
-	card->plxbase = pci_resource_start(akt_pcidev, PCI_REG_PLX_MEM_BASE);
-	card->membase = pci_resource_start(akt_pcidev, PCI_REG_MEMORY_BASE);
-	card->brdtype = BD_NONE;	/* unknown */
-	card->debug_flags = DEF_DEB_FLAGS;	/* set default debug */
-	card->faxchans = 0;	/* default no fax channels */
-	card->bchans = 2;	/* and 2 b-channels */
-	card->brdtype = ent->driver_data;
-
-	if (ergo_inithardware(card)) {
-		printk(KERN_WARNING "HYSDN: card at io 0x%04x already in use\n", card->iobase);
-		rc = -EBUSY;
-		goto err_out_card;
-	}
-
-	cardmax++;
-	card->next = NULL;	/*end of chain */
-	if (card_last)
-		card_last->next = card;		/* pointer to next card */
-	else
-		card_root = card;
-	card_last = card;	/* new chain end */
-
-	pci_set_drvdata(akt_pcidev, card);
-	return 0;
-
-err_out_card:
-	kfree(card);
-err_out:
-	pci_disable_device(akt_pcidev);
-	return rc;
-}
-
-static void hysdn_pci_remove_one(struct pci_dev *akt_pcidev)
-{
-	hysdn_card *card = pci_get_drvdata(akt_pcidev);
-
-	pci_set_drvdata(akt_pcidev, NULL);
-
-	if (card->stopcard)
-		card->stopcard(card);
-
-#ifdef CONFIG_HYSDN_CAPI
-	hycapi_capi_release(card);
-#endif
-
-	if (card->releasehardware)
-		card->releasehardware(card);   /* free all hardware resources */
-
-	if (card == card_root) {
-		card_root = card_root->next;
-		if (!card_root)
-			card_last = NULL;
-	} else {
-		hysdn_card *tmp = card_root;
-		while (tmp) {
-			if (tmp->next == card)
-				tmp->next = card->next;
-			card_last = tmp;
-			tmp = tmp->next;
-		}
-	}
-
-	kfree(card);
-	pci_disable_device(akt_pcidev);
-}
-
-static struct pci_driver hysdn_pci_driver = {
-	.name		= "hysdn",
-	.id_table	= hysdn_pci_tbl,
-	.probe		= hysdn_pci_init_one,
-	.remove		= hysdn_pci_remove_one,
-};
-
-static int hysdn_have_procfs;
-
-static int __init
-hysdn_init(void)
-{
-	int rc;
-
-	printk(KERN_NOTICE "HYSDN: module loaded\n");
-
-	rc = pci_register_driver(&hysdn_pci_driver);
-	if (rc)
-		return rc;
-
-	printk(KERN_INFO "HYSDN: %d card(s) found.\n", cardmax);
-
-	if (!hysdn_procconf_init())
-		hysdn_have_procfs = 1;
-
-#ifdef CONFIG_HYSDN_CAPI
-	if (cardmax > 0) {
-		if (hycapi_init()) {
-			printk(KERN_ERR "HYCAPI: init failed\n");
-
-			if (hysdn_have_procfs)
-				hysdn_procconf_release();
-
-			pci_unregister_driver(&hysdn_pci_driver);
-			return -ESPIPE;
-		}
-	}
-#endif /* CONFIG_HYSDN_CAPI */
-
-	return 0;		/* no error */
-}				/* init_module */
-
-
-/***********************************************************************/
-/* cleanup_module is called when the module is released by the kernel. */
-/* The routine is only called if init_module has been successful and   */
-/* the module counter has a value of 0. Otherwise this function will   */
-/* not be called. This function must release all resources still allo- */
-/* cated as after the return from this function the module code will   */
-/* be removed from memory.                                             */
-/***********************************************************************/
-static void __exit
-hysdn_exit(void)
-{
-	if (hysdn_have_procfs)
-		hysdn_procconf_release();
-
-	pci_unregister_driver(&hysdn_pci_driver);
-
-#ifdef CONFIG_HYSDN_CAPI
-	hycapi_cleanup();
-#endif /* CONFIG_HYSDN_CAPI */
-
-	printk(KERN_NOTICE "HYSDN: module unloaded\n");
-}				/* cleanup_module */
-
-module_init(hysdn_init);
-module_exit(hysdn_exit);
diff --git a/drivers/isdn/hysdn/hysdn_net.c b/drivers/isdn/hysdn/hysdn_net.c
deleted file mode 100644
index 8e9c34f33d86..000000000000
--- a/drivers/isdn/hysdn/hysdn_net.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/* $Id: hysdn_net.c,v 1.8.6.4 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, net (ethernet type) handling routines.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * This net module has been inspired by the skeleton driver from
- * Donald Becker (becker@CESDIS.gsfc.nasa.gov)
- *
- */
-
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/inetdevice.h>
-
-#include "hysdn_defs.h"
-
-unsigned int hynet_enable = 0xffffffff;
-module_param(hynet_enable, uint, 0);
-
-#define MAX_SKB_BUFFERS 20	/* number of buffers for keeping TX-data */
-
-/****************************************************************************/
-/* structure containing the complete network data. The structure is aligned */
-/* in a way that both, the device and statistics are kept inside it.        */
-/* for proper access, the device structure MUST be the first var/struct     */
-/* inside the definition.                                                   */
-/****************************************************************************/
-struct net_local {
-	/* Tx control lock.  This protects the transmit buffer ring
-	 * state along with the "tx full" state of the driver.  This
-	 * means all netif_queue flow control actions are protected
-	 * by this lock as well.
-	 */
-	struct net_device *dev;
-	spinlock_t lock;
-	struct sk_buff *skbs[MAX_SKB_BUFFERS];	/* pointers to tx-skbs */
-	int in_idx, out_idx;	/* indexes to buffer ring */
-	int sk_count;		/* number of buffers currently in ring */
-};				/* net_local */
-
-
-
-/*********************************************************************/
-/* Open/initialize the board. This is called (in the current kernel) */
-/* sometime after booting when the 'ifconfig' program is run.        */
-/* This routine should set everything up anew at each open, even     */
-/* registers that "should" only need to be set once at boot, so that */
-/* there is non-reboot way to recover if something goes wrong.       */
-/*********************************************************************/
-static int
-net_open(struct net_device *dev)
-{
-	struct in_device *in_dev;
-	hysdn_card *card = dev->ml_priv;
-	int i;
-
-	netif_start_queue(dev);	/* start tx-queueing */
-
-	/* Fill in the MAC-level header (if not already set) */
-	if (!card->mac_addr[0]) {
-		for (i = 0; i < ETH_ALEN; i++)
-			dev->dev_addr[i] = 0xfc;
-		if ((in_dev = dev->ip_ptr) != NULL) {
-			struct in_ifaddr *ifa = in_dev->ifa_list;
-			if (ifa != NULL)
-				memcpy(dev->dev_addr + (ETH_ALEN - sizeof(ifa->ifa_local)), &ifa->ifa_local, sizeof(ifa->ifa_local));
-		}
-	} else
-		memcpy(dev->dev_addr, card->mac_addr, ETH_ALEN);
-
-	return (0);
-}				/* net_open */
-
-/*******************************************/
-/* flush the currently occupied tx-buffers */
-/* must only be called when device closed  */
-/*******************************************/
-static void
-flush_tx_buffers(struct net_local *nl)
-{
-
-	while (nl->sk_count) {
-		dev_kfree_skb(nl->skbs[nl->out_idx++]);		/* free skb */
-		if (nl->out_idx >= MAX_SKB_BUFFERS)
-			nl->out_idx = 0;	/* wrap around */
-		nl->sk_count--;
-	}
-}				/* flush_tx_buffers */
-
-
-/*********************************************************************/
-/* close/decativate the device. The device is not removed, but only  */
-/* deactivated.                                                      */
-/*********************************************************************/
-static int
-net_close(struct net_device *dev)
-{
-
-	netif_stop_queue(dev);	/* disable queueing */
-
-	flush_tx_buffers((struct net_local *) dev);
-
-	return (0);		/* success */
-}				/* net_close */
-
-/************************************/
-/* send a packet on this interface. */
-/* new style for kernel >= 2.3.33   */
-/************************************/
-static netdev_tx_t
-net_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
-	struct net_local *lp = (struct net_local *) dev;
-
-	spin_lock_irq(&lp->lock);
-
-	lp->skbs[lp->in_idx++] = skb;	/* add to buffer list */
-	if (lp->in_idx >= MAX_SKB_BUFFERS)
-		lp->in_idx = 0;	/* wrap around */
-	lp->sk_count++;		/* adjust counter */
-	netif_trans_update(dev);
-
-	/* If we just used up the very last entry in the
-	 * TX ring on this device, tell the queueing
-	 * layer to send no more.
-	 */
-	if (lp->sk_count >= MAX_SKB_BUFFERS)
-		netif_stop_queue(dev);
-
-	/* When the TX completion hw interrupt arrives, this
-	 * is when the transmit statistics are updated.
-	 */
-
-	spin_unlock_irq(&lp->lock);
-
-	if (lp->sk_count <= 3) {
-		schedule_work(&((hysdn_card *) dev->ml_priv)->irq_queue);
-	}
-	return NETDEV_TX_OK;	/* success */
-}				/* net_send_packet */
-
-
-
-/***********************************************************************/
-/* acknowlegde a packet send. The network layer will be informed about */
-/* completion                                                          */
-/***********************************************************************/
-void
-hysdn_tx_netack(hysdn_card *card)
-{
-	struct net_local *lp = card->netif;
-
-	if (!lp)
-		return;		/* non existing device */
-
-
-	if (!lp->sk_count)
-		return;		/* error condition */
-
-	lp->dev->stats.tx_packets++;
-	lp->dev->stats.tx_bytes += lp->skbs[lp->out_idx]->len;
-
-	dev_kfree_skb(lp->skbs[lp->out_idx++]);		/* free skb */
-	if (lp->out_idx >= MAX_SKB_BUFFERS)
-		lp->out_idx = 0;	/* wrap around */
-
-	if (lp->sk_count-- == MAX_SKB_BUFFERS)	/* dec usage count */
-		netif_start_queue((struct net_device *) lp);
-}				/* hysdn_tx_netack */
-
-/*****************************************************/
-/* we got a packet from the network, go and queue it */
-/*****************************************************/
-void
-hysdn_rx_netpkt(hysdn_card *card, unsigned char *buf, unsigned short len)
-{
-	struct net_local *lp = card->netif;
-	struct net_device *dev;
-	struct sk_buff *skb;
-
-	if (!lp)
-		return;		/* non existing device */
-
-	dev = lp->dev;
-	dev->stats.rx_bytes += len;
-
-	skb = dev_alloc_skb(len);
-	if (skb == NULL) {
-		printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
-		       dev->name);
-		dev->stats.rx_dropped++;
-		return;
-	}
-	/* copy the data */
-	skb_put_data(skb, buf, len);
-
-	/* determine the used protocol */
-	skb->protocol = eth_type_trans(skb, dev);
-
-	dev->stats.rx_packets++;	/* adjust packet count */
-
-	netif_rx(skb);
-}				/* hysdn_rx_netpkt */
-
-/*****************************************************/
-/* return the pointer to a network packet to be send */
-/*****************************************************/
-struct sk_buff *
-hysdn_tx_netget(hysdn_card *card)
-{
-	struct net_local *lp = card->netif;
-
-	if (!lp)
-		return (NULL);	/* non existing device */
-
-	if (!lp->sk_count)
-		return (NULL);	/* nothing available */
-
-	return (lp->skbs[lp->out_idx]);		/* next packet to send */
-}				/* hysdn_tx_netget */
-
-static const struct net_device_ops hysdn_netdev_ops = {
-	.ndo_open		= net_open,
-	.ndo_stop		= net_close,
-	.ndo_start_xmit		= net_send_packet,
-	.ndo_set_mac_address	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-
-/*****************************************************************************/
-/* hysdn_net_create creates a new net device for the given card. If a device */
-/* already exists, it will be deleted and created a new one. The return value */
-/* 0 announces success, else a negative error code will be returned.         */
-/*****************************************************************************/
-int
-hysdn_net_create(hysdn_card *card)
-{
-	struct net_device *dev;
-	int i;
-	struct net_local *lp;
-
-	if (!card) {
-		printk(KERN_WARNING "No card-pt in hysdn_net_create!\n");
-		return (-ENOMEM);
-	}
-	hysdn_net_release(card);	/* release an existing net device */
-
-	dev = alloc_etherdev(sizeof(struct net_local));
-	if (!dev) {
-		printk(KERN_WARNING "HYSDN: unable to allocate mem\n");
-		return (-ENOMEM);
-	}
-
-	lp = netdev_priv(dev);
-	lp->dev = dev;
-
-	dev->netdev_ops = &hysdn_netdev_ops;
-	spin_lock_init(&((struct net_local *) dev)->lock);
-
-	/* initialise necessary or informing fields */
-	dev->base_addr = card->iobase;	/* IO address */
-	dev->irq = card->irq;	/* irq */
-
-	dev->netdev_ops = &hysdn_netdev_ops;
-	if ((i = register_netdev(dev))) {
-		printk(KERN_WARNING "HYSDN: unable to create network device\n");
-		free_netdev(dev);
-		return (i);
-	}
-	dev->ml_priv = card;	/* remember pointer to own data structure */
-	card->netif = dev;	/* setup the local pointer */
-
-	if (card->debug_flags & LOG_NET_INIT)
-		hysdn_addlog(card, "network device created");
-	return (0);		/* and return success */
-}				/* hysdn_net_create */
-
-/***************************************************************************/
-/* hysdn_net_release deletes the net device for the given card. The return */
-/* value 0 announces success, else a negative error code will be returned. */
-/***************************************************************************/
-int
-hysdn_net_release(hysdn_card *card)
-{
-	struct net_device *dev = card->netif;
-
-	if (!dev)
-		return (0);	/* non existing */
-
-	card->netif = NULL;	/* clear out pointer */
-	net_close(dev);
-
-	flush_tx_buffers((struct net_local *) dev);	/* empty buffers */
-
-	unregister_netdev(dev);	/* release the device */
-	free_netdev(dev);	/* release the memory allocated */
-	if (card->debug_flags & LOG_NET_INIT)
-		hysdn_addlog(card, "network device deleted");
-
-	return (0);		/* always successful */
-}				/* hysdn_net_release */
-
-/*****************************************************************************/
-/* hysdn_net_getname returns a pointer to the name of the network interface. */
-/* if the interface is not existing, a "-" is returned.                      */
-/*****************************************************************************/
-char *
-hysdn_net_getname(hysdn_card *card)
-{
-	struct net_device *dev = card->netif;
-
-	if (!dev)
-		return ("-");	/* non existing */
-
-	return (dev->name);
-}				/* hysdn_net_getname */
diff --git a/drivers/isdn/hysdn/hysdn_pof.h b/drivers/isdn/hysdn/hysdn_pof.h
deleted file mode 100644
index f63f5fa59d7e..000000000000
--- a/drivers/isdn/hysdn/hysdn_pof.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* $Id: hysdn_pof.h,v 1.2.6.1 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, definitions used for handling pof-files.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-/************************/
-/* POF specific defines */
-/************************/
-#define BOOT_BUF_SIZE   0x1000	/* =4096, maybe moved to other h file */
-#define CRYPT_FEEDTERM  0x8142
-#define CRYPT_STARTTERM 0x81a5
-/*  max. timeout time in seconds
- *  from end of booting to POF is ready
- */
-#define POF_READY_TIME_OUT_SEC  10
-
-/**********************************/
-/* defines for 1.stage boot image */
-/**********************************/
-
-/*  the POF file record containing the boot loader image
- *  has 2 pages a 16KB:
- *  1. page contains the high 16-bit part of the 32-bit E1 words
- *  2. page contains the low  16-bit part of the 32-bit E1 words
- *
- *  In each 16KB page we assume the start of the boot loader code
- *  in the highest 2KB part (at offset 0x3800);
- *  the rest (0x0000..0x37FF) is assumed to contain 0 bytes.
- */
-
-#define POF_BOOT_LOADER_PAGE_SIZE   0x4000	/* =16384U */
-#define POF_BOOT_LOADER_TOTAL_SIZE  (2U * POF_BOOT_LOADER_PAGE_SIZE)
-
-#define POF_BOOT_LOADER_CODE_SIZE   0x0800	/* =2KB =2048U */
-
-/* offset in boot page, where loader code may start */
-/* =0x3800= 14336U */
-#define POF_BOOT_LOADER_OFF_IN_PAGE (POF_BOOT_LOADER_PAGE_SIZE-POF_BOOT_LOADER_CODE_SIZE)
-
-
-/*--------------------------------------POF file record structs------------*/
-typedef struct PofFileHdr_tag {	/* Pof file header */
-	/*00 */ unsigned long Magic __attribute__((packed));
-	/*04 */ unsigned long N_PofRecs __attribute__((packed));
-/*08 */
-} tPofFileHdr;
-
-typedef struct PofRecHdr_tag {	/* Pof record header */
-	/*00 */ unsigned short PofRecId __attribute__((packed));
-	/*02 */ unsigned long PofRecDataLen __attribute__((packed));
-/*06 */
-} tPofRecHdr;
-
-typedef struct PofTimeStamp_tag {
-	/*00 */ unsigned long UnixTime __attribute__((packed));
-	/*04 */ unsigned char DateTimeText[0x28];
-	/* =40 */
-/*2C */
-} tPofTimeStamp;
-
-/* tPofFileHdr.Magic value: */
-#define TAGFILEMAGIC 0x464F501AUL
-/* tPofRecHdr.PofRecId values: */
-#define TAG_ABSDATA  0x1000	/* abs. data */
-#define TAG_BOOTDTA  0x1001	/* boot data */
-#define TAG_COMMENT  0x0020
-#define TAG_SYSCALL  0x0021
-#define TAG_FLOWCTRL 0x0022
-#define TAG_TIMESTMP 0x0010	/* date/time stamp of version */
-#define TAG_CABSDATA 0x1100	/* crypted abs. data */
-#define TAG_CBOOTDTA 0x1101	/* crypted boot data */
diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c
deleted file mode 100644
index 73079213ec94..000000000000
--- a/drivers/isdn/hysdn/hysdn_procconf.c
+++ /dev/null
@@ -1,411 +0,0 @@
-/* $Id: hysdn_procconf.c,v 1.8.6.4 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, /proc/net filesystem dir and conf functions.
- *
- * written by Werner Cornelius (werner@titro.de) for Hypercope GmbH
- *
- * Copyright 1999  by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/cred.h>
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <net/net_namespace.h>
-
-#include "hysdn_defs.h"
-
-static DEFINE_MUTEX(hysdn_conf_mutex);
-
-#define INFO_OUT_LEN 80		/* length of info line including lf */
-
-/********************************************************/
-/* defines and data structure for conf write operations */
-/********************************************************/
-#define CONF_STATE_DETECT 0	/* waiting for detect */
-#define CONF_STATE_CONF   1	/* writing config data */
-#define CONF_STATE_POF    2	/* writing pof data */
-#define CONF_LINE_LEN   255	/* 255 chars max */
-
-struct conf_writedata {
-	hysdn_card *card;	/* card the device is connected to */
-	int buf_size;		/* actual number of bytes in the buffer */
-	int needed_size;	/* needed size when reading pof */
-	int state;		/* actual interface states from above constants */
-	unsigned char conf_line[CONF_LINE_LEN];	/* buffered conf line */
-	unsigned short channel;		/* active channel number */
-	unsigned char *pof_buffer;	/* buffer when writing pof */
-};
-
-/***********************************************************************/
-/* process_line parses one config line and transfers it to the card if */
-/* necessary.                                                          */
-/* if the return value is negative an error occurred.                   */
-/***********************************************************************/
-static int
-process_line(struct conf_writedata *cnf)
-{
-	unsigned char *cp = cnf->conf_line;
-	int i;
-
-	if (cnf->card->debug_flags & LOG_CNF_LINE)
-		hysdn_addlog(cnf->card, "conf line: %s", cp);
-
-	if (*cp == '-') {	/* option */
-		cp++;		/* point to option char */
-
-		if (*cp++ != 'c')
-			return (0);	/* option unknown or used */
-		i = 0;		/* start value for channel */
-		while ((*cp <= '9') && (*cp >= '0'))
-			i = i * 10 + *cp++ - '0';	/* get decimal number */
-		if (i > 65535) {
-			if (cnf->card->debug_flags & LOG_CNF_MISC)
-				hysdn_addlog(cnf->card, "conf channel invalid  %d", i);
-			return (-ERR_INV_CHAN);		/* invalid channel */
-		}
-		cnf->channel = i & 0xFFFF;	/* set new channel number */
-		return (0);	/* success */
-	}			/* option */
-	if (*cp == '*') {	/* line to send */
-		if (cnf->card->debug_flags & LOG_CNF_DATA)
-			hysdn_addlog(cnf->card, "conf chan=%d %s", cnf->channel, cp);
-		return (hysdn_tx_cfgline(cnf->card, cnf->conf_line + 1,
-					 cnf->channel));	/* send the line without * */
-	}			/* line to send */
-	return (0);
-}				/* process_line */
-
-/***********************************/
-/* conf file operations and tables */
-/***********************************/
-
-/****************************************************/
-/* write conf file -> boot or send cfg line to card */
-/****************************************************/
-static ssize_t
-hysdn_conf_write(struct file *file, const char __user *buf, size_t count, loff_t *off)
-{
-	struct conf_writedata *cnf;
-	int i;
-	unsigned char ch, *cp;
-
-	if (!count)
-		return (0);	/* nothing to handle */
-
-	if (!(cnf = file->private_data))
-		return (-EFAULT);	/* should never happen */
-
-	if (cnf->state == CONF_STATE_DETECT) {	/* auto detect cnf or pof data */
-		if (copy_from_user(&ch, buf, 1))	/* get first char for detect */
-			return (-EFAULT);
-
-		if (ch == 0x1A) {
-			/* we detected a pof file */
-			if ((cnf->needed_size = pof_write_open(cnf->card, &cnf->pof_buffer)) <= 0)
-				return (cnf->needed_size);	/* an error occurred -> exit */
-			cnf->buf_size = 0;	/* buffer is empty */
-			cnf->state = CONF_STATE_POF;	/* new state */
-		} else {
-			/* conf data has been detected */
-			cnf->buf_size = 0;	/* buffer is empty */
-			cnf->state = CONF_STATE_CONF;	/* requested conf data write */
-			if (cnf->card->state != CARD_STATE_RUN)
-				return (-ERR_NOT_BOOTED);
-			cnf->conf_line[CONF_LINE_LEN - 1] = 0;	/* limit string length */
-			cnf->channel = 4098;	/* default channel for output */
-		}
-	}			/* state was auto detect */
-	if (cnf->state == CONF_STATE_POF) {	/* pof write active */
-		i = cnf->needed_size - cnf->buf_size;	/* bytes still missing for write */
-		if (i <= 0)
-			return (-EINVAL);	/* size error handling pof */
-
-		if (i < count)
-			count = i;	/* limit requested number of bytes */
-		if (copy_from_user(cnf->pof_buffer + cnf->buf_size, buf, count))
-			return (-EFAULT);	/* error while copying */
-		cnf->buf_size += count;
-
-		if (cnf->needed_size == cnf->buf_size) {
-			cnf->needed_size = pof_write_buffer(cnf->card, cnf->buf_size);	/* write data */
-			if (cnf->needed_size <= 0) {
-				cnf->card->state = CARD_STATE_BOOTERR;	/* show boot error */
-				return (cnf->needed_size);	/* an error occurred */
-			}
-			cnf->buf_size = 0;	/* buffer is empty again */
-		}
-	}
-	/* pof write active */
-	else {			/* conf write active */
-
-		if (cnf->card->state != CARD_STATE_RUN) {
-			if (cnf->card->debug_flags & LOG_CNF_MISC)
-				hysdn_addlog(cnf->card, "cnf write denied -> not booted");
-			return (-ERR_NOT_BOOTED);
-		}
-		i = (CONF_LINE_LEN - 1) - cnf->buf_size;	/* bytes available in buffer */
-		if (i > 0) {
-			/* copy remaining bytes into buffer */
-
-			if (count > i)
-				count = i;	/* limit transfer */
-			if (copy_from_user(cnf->conf_line + cnf->buf_size, buf, count))
-				return (-EFAULT);	/* error while copying */
-
-			i = count;	/* number of chars in buffer */
-			cp = cnf->conf_line + cnf->buf_size;
-			while (i) {
-				/* search for end of line */
-				if ((*cp < ' ') && (*cp != 9))
-					break;	/* end of line found */
-				cp++;
-				i--;
-			}	/* search for end of line */
-
-			if (i) {
-				/* delimiter found */
-				*cp++ = 0;	/* string termination */
-				count -= (i - 1);	/* subtract remaining bytes from count */
-				while ((i) && (*cp < ' ') && (*cp != 9)) {
-					i--;	/* discard next char */
-					count++;	/* mark as read */
-					cp++;	/* next char */
-				}
-				cnf->buf_size = 0;	/* buffer is empty after transfer */
-				if ((i = process_line(cnf)) < 0)	/* handle the line */
-					count = i;	/* return the error */
-			}
-			/* delimiter found */
-			else {
-				cnf->buf_size += count;		/* add chars to string */
-				if (cnf->buf_size >= CONF_LINE_LEN - 1) {
-					if (cnf->card->debug_flags & LOG_CNF_MISC)
-						hysdn_addlog(cnf->card, "cnf line too long %d chars pos %d", cnf->buf_size, count);
-					return (-ERR_CONF_LONG);
-				}
-			}	/* not delimited */
-
-		}
-		/* copy remaining bytes into buffer */
-		else {
-			if (cnf->card->debug_flags & LOG_CNF_MISC)
-				hysdn_addlog(cnf->card, "cnf line too long");
-			return (-ERR_CONF_LONG);
-		}
-	}			/* conf write active */
-
-	return (count);
-}				/* hysdn_conf_write */
-
-/*******************************************/
-/* read conf file -> output card info data */
-/*******************************************/
-static ssize_t
-hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t *off)
-{
-	char *cp;
-
-	if (!(file->f_mode & FMODE_READ))
-		return -EPERM;	/* no permission to read */
-
-	if (!(cp = file->private_data))
-		return -EFAULT;	/* should never happen */
-
-	return simple_read_from_buffer(buf, count, off, cp, strlen(cp));
-}				/* hysdn_conf_read */
-
-/******************/
-/* open conf file */
-/******************/
-static int
-hysdn_conf_open(struct inode *ino, struct file *filep)
-{
-	hysdn_card *card;
-	struct conf_writedata *cnf;
-	char *cp, *tmp;
-
-	/* now search the addressed card */
-	mutex_lock(&hysdn_conf_mutex);
-	card = PDE_DATA(ino);
-	if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
-		hysdn_addlog(card, "config open for uid=%d gid=%d mode=0x%x",
-			     filep->f_cred->fsuid, filep->f_cred->fsgid,
-			     filep->f_mode);
-
-	if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
-		/* write only access -> write boot file or conf line */
-
-		if (!(cnf = kmalloc(sizeof(struct conf_writedata), GFP_KERNEL))) {
-			mutex_unlock(&hysdn_conf_mutex);
-			return (-EFAULT);
-		}
-		cnf->card = card;
-		cnf->buf_size = 0;	/* nothing buffered */
-		cnf->state = CONF_STATE_DETECT;		/* start auto detect */
-		filep->private_data = cnf;
-
-	} else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
-		/* read access -> output card info data */
-
-		if (!(tmp = kmalloc(INFO_OUT_LEN * 2 + 2, GFP_KERNEL))) {
-			mutex_unlock(&hysdn_conf_mutex);
-			return (-EFAULT);	/* out of memory */
-		}
-		filep->private_data = tmp;	/* start of string */
-
-		/* first output a headline */
-		sprintf(tmp, "id bus slot type irq iobase dp-mem     b-chans fax-chans state device");
-		cp = tmp;	/* start of string */
-		while (*cp)
-			cp++;
-		while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN)
-			*cp++ = ' ';
-		*cp++ = '\n';
-
-		/* and now the data */
-		sprintf(cp, "%d  %3d %4d %4d %3d 0x%04x 0x%08lx %7d %9d %3d   %s",
-			card->myid,
-			card->bus,
-			PCI_SLOT(card->devfn),
-			card->brdtype,
-			card->irq,
-			card->iobase,
-			card->membase,
-			card->bchans,
-			card->faxchans,
-			card->state,
-			hysdn_net_getname(card));
-		while (*cp)
-			cp++;
-		while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN)
-			*cp++ = ' ';
-		*cp++ = '\n';
-		*cp = 0;	/* end of string */
-	} else {		/* simultaneous read/write access forbidden ! */
-		mutex_unlock(&hysdn_conf_mutex);
-		return (-EPERM);	/* no permission this time */
-	}
-	mutex_unlock(&hysdn_conf_mutex);
-	return nonseekable_open(ino, filep);
-}				/* hysdn_conf_open */
-
-/***************************/
-/* close a config file.    */
-/***************************/
-static int
-hysdn_conf_close(struct inode *ino, struct file *filep)
-{
-	hysdn_card *card;
-	struct conf_writedata *cnf;
-	int retval = 0;
-
-	mutex_lock(&hysdn_conf_mutex);
-	card = PDE_DATA(ino);
-	if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
-		hysdn_addlog(card, "config close for uid=%d gid=%d mode=0x%x",
-			     filep->f_cred->fsuid, filep->f_cred->fsgid,
-			     filep->f_mode);
-
-	if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
-		/* write only access -> write boot file or conf line */
-		if (filep->private_data) {
-			cnf = filep->private_data;
-
-			if (cnf->state == CONF_STATE_POF)
-				retval = pof_write_close(cnf->card);	/* close the pof write */
-			kfree(filep->private_data);	/* free allocated memory for buffer */
-
-		}		/* handle write private data */
-	} else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
-		/* read access -> output card info data */
-
-		kfree(filep->private_data);	/* release memory */
-	}
-	mutex_unlock(&hysdn_conf_mutex);
-	return (retval);
-}				/* hysdn_conf_close */
-
-/******************************************************/
-/* table for conf filesystem functions defined above. */
-/******************************************************/
-static const struct file_operations conf_fops =
-{
-	.owner		= THIS_MODULE,
-	.llseek         = no_llseek,
-	.read           = hysdn_conf_read,
-	.write          = hysdn_conf_write,
-	.open           = hysdn_conf_open,
-	.release        = hysdn_conf_close,
-};
-
-/*****************************/
-/* hysdn subdir in /proc/net */
-/*****************************/
-struct proc_dir_entry *hysdn_proc_entry = NULL;
-
-/*******************************************************************************/
-/* hysdn_procconf_init is called when the module is loaded and after the cards */
-/* have been detected. The needed proc dir and card config files are created.  */
-/* The log init is called at last.                                             */
-/*******************************************************************************/
-int
-hysdn_procconf_init(void)
-{
-	hysdn_card *card;
-	unsigned char conf_name[20];
-
-	hysdn_proc_entry = proc_mkdir(PROC_SUBDIR_NAME, init_net.proc_net);
-	if (!hysdn_proc_entry) {
-		printk(KERN_ERR "HYSDN: unable to create hysdn subdir\n");
-		return (-1);
-	}
-	card = card_root;	/* point to first card */
-	while (card) {
-
-		sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
-		if ((card->procconf = (void *) proc_create_data(conf_name,
-							   S_IFREG | S_IRUGO | S_IWUSR,
-							   hysdn_proc_entry,
-							   &conf_fops,
-							   card)) != NULL) {
-			hysdn_proclog_init(card);	/* init the log file entry */
-		}
-		card = card->next;	/* next entry */
-	}
-
-	printk(KERN_NOTICE "HYSDN: procfs initialised\n");
-	return (0);
-}				/* hysdn_procconf_init */
-
-/*************************************************************************************/
-/* hysdn_procconf_release is called when the module is unloaded and before the cards */
-/* resources are released. The module counter is assumed to be 0 !                   */
-/*************************************************************************************/
-void
-hysdn_procconf_release(void)
-{
-	hysdn_card *card;
-	unsigned char conf_name[20];
-
-	card = card_root;	/* start with first card */
-	while (card) {
-
-		sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
-		if (card->procconf)
-			remove_proc_entry(conf_name, hysdn_proc_entry);
-
-		hysdn_proclog_release(card);	/* init the log file entry */
-
-		card = card->next;	/* point to next card */
-	}
-
-	remove_proc_entry(PROC_SUBDIR_NAME, init_net.proc_net);
-}
diff --git a/drivers/isdn/hysdn/hysdn_proclog.c b/drivers/isdn/hysdn/hysdn_proclog.c
deleted file mode 100644
index 6e898b90e86e..000000000000
--- a/drivers/isdn/hysdn/hysdn_proclog.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/* $Id: hysdn_proclog.c,v 1.9.6.3 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, /proc/net filesystem log functions.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/kernel.h>
-
-#include "hysdn_defs.h"
-
-/* the proc subdir for the interface is defined in the procconf module */
-extern struct proc_dir_entry *hysdn_proc_entry;
-
-static DEFINE_MUTEX(hysdn_log_mutex);
-static void put_log_buffer(hysdn_card *card, char *cp);
-
-/*************************************************/
-/* structure keeping ascii log for device output */
-/*************************************************/
-struct log_data {
-	struct log_data *next;
-	unsigned long usage_cnt;/* number of files still to work */
-	void *proc_ctrl;	/* pointer to own control procdata structure */
-	char log_start[2];	/* log string start (final len aligned by size) */
-};
-
-/**********************************************/
-/* structure holding proc entrys for one card */
-/**********************************************/
-struct procdata {
-	struct proc_dir_entry *log;	/* log entry */
-	char log_name[15];	/* log filename */
-	struct log_data *log_head, *log_tail;	/* head and tail for queue */
-	int if_used;		/* open count for interface */
-	unsigned char logtmp[LOG_MAX_LINELEN];
-	wait_queue_head_t rd_queue;
-};
-
-
-/**********************************************/
-/* log function for cards error log interface */
-/**********************************************/
-void
-hysdn_card_errlog(hysdn_card *card, tErrLogEntry *logp, int maxsize)
-{
-	char buf[ERRLOG_TEXT_SIZE + 40];
-
-	sprintf(buf, "LOG 0x%08lX 0x%08lX : %s\n", logp->ulErrType, logp->ulErrSubtype, logp->ucText);
-	put_log_buffer(card, buf);	/* output the string */
-}				/* hysdn_card_errlog */
-
-/***************************************************/
-/* Log function using format specifiers for output */
-/***************************************************/
-void
-hysdn_addlog(hysdn_card *card, char *fmt, ...)
-{
-	struct procdata *pd = card->proclog;
-	char *cp;
-	va_list args;
-
-	if (!pd)
-		return;		/* log structure non existent */
-
-	cp = pd->logtmp;
-	cp += sprintf(cp, "HYSDN: card %d ", card->myid);
-
-	va_start(args, fmt);
-	cp += vsprintf(cp, fmt, args);
-	va_end(args);
-	*cp++ = '\n';
-	*cp = 0;
-
-	if (card->debug_flags & DEB_OUT_SYSLOG)
-		printk(KERN_INFO "%s", pd->logtmp);
-	else
-		put_log_buffer(card, pd->logtmp);
-
-}				/* hysdn_addlog */
-
-/********************************************/
-/* put an log buffer into the log queue.    */
-/* This buffer will be kept until all files */
-/* opened for read got the contents.        */
-/* Flushes buffers not longer in use.       */
-/********************************************/
-static void
-put_log_buffer(hysdn_card *card, char *cp)
-{
-	struct log_data *ib;
-	struct procdata *pd = card->proclog;
-	unsigned long flags;
-
-	if (!pd)
-		return;
-	if (!cp)
-		return;
-	if (!*cp)
-		return;
-	if (pd->if_used <= 0)
-		return;		/* no open file for read */
-
-	if (!(ib = kmalloc(sizeof(struct log_data) + strlen(cp), GFP_ATOMIC)))
-		return;	/* no memory */
-	strcpy(ib->log_start, cp);	/* set output string */
-	ib->next = NULL;
-	ib->proc_ctrl = pd;	/* point to own control structure */
-	spin_lock_irqsave(&card->hysdn_lock, flags);
-	ib->usage_cnt = pd->if_used;
-	if (!pd->log_head)
-		pd->log_head = ib;	/* new head */
-	else
-		pd->log_tail->next = ib;	/* follows existing messages */
-	pd->log_tail = ib;	/* new tail */
-
-	/* delete old entrys */
-	while (pd->log_head->next) {
-		if ((pd->log_head->usage_cnt <= 0) &&
-		    (pd->log_head->next->usage_cnt <= 0)) {
-			ib = pd->log_head;
-			pd->log_head = pd->log_head->next;
-			kfree(ib);
-		} else {
-			break;
-		}
-	}		/* pd->log_head->next */
-
-	spin_unlock_irqrestore(&card->hysdn_lock, flags);
-
-	wake_up_interruptible(&(pd->rd_queue));		/* announce new entry */
-}				/* put_log_buffer */
-
-
-/******************************/
-/* file operations and tables */
-/******************************/
-
-/****************************************/
-/* write log file -> set log level bits */
-/****************************************/
-static ssize_t
-hysdn_log_write(struct file *file, const char __user *buf, size_t count, loff_t *off)
-{
-	int rc;
-	hysdn_card *card = file->private_data;
-
-	rc = kstrtoul_from_user(buf, count, 0, &card->debug_flags);
-	if (rc < 0)
-		return rc;
-	hysdn_addlog(card, "debug set to 0x%lx", card->debug_flags);
-	return (count);
-}				/* hysdn_log_write */
-
-/******************/
-/* read log file */
-/******************/
-static ssize_t
-hysdn_log_read(struct file *file, char __user *buf, size_t count, loff_t *off)
-{
-	struct log_data *inf;
-	int len;
-	hysdn_card *card = PDE_DATA(file_inode(file));
-
-	if (!(inf = *((struct log_data **) file->private_data))) {
-		struct procdata *pd = card->proclog;
-		if (file->f_flags & O_NONBLOCK)
-			return (-EAGAIN);
-
-		wait_event_interruptible(pd->rd_queue, (inf =
-				*((struct log_data **) file->private_data)));
-	}
-	if (!inf)
-		return (0);
-
-	inf->usage_cnt--;	/* new usage count */
-	file->private_data = &inf->next;	/* next structure */
-	if ((len = strlen(inf->log_start)) <= count) {
-		if (copy_to_user(buf, inf->log_start, len))
-			return -EFAULT;
-		*off += len;
-		return (len);
-	}
-	return (0);
-}				/* hysdn_log_read */
-
-/******************/
-/* open log file */
-/******************/
-static int
-hysdn_log_open(struct inode *ino, struct file *filep)
-{
-	hysdn_card *card = PDE_DATA(ino);
-
-	mutex_lock(&hysdn_log_mutex);
-	if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
-		/* write only access -> write log level only */
-		filep->private_data = card;	/* remember our own card */
-	} else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
-		struct procdata *pd = card->proclog;
-		unsigned long flags;
-
-		/* read access -> log/debug read */
-		spin_lock_irqsave(&card->hysdn_lock, flags);
-		pd->if_used++;
-		if (pd->log_head)
-			filep->private_data = &pd->log_tail->next;
-		else
-			filep->private_data = &pd->log_head;
-		spin_unlock_irqrestore(&card->hysdn_lock, flags);
-	} else {		/* simultaneous read/write access forbidden ! */
-		mutex_unlock(&hysdn_log_mutex);
-		return (-EPERM);	/* no permission this time */
-	}
-	mutex_unlock(&hysdn_log_mutex);
-	return nonseekable_open(ino, filep);
-}				/* hysdn_log_open */
-
-/*******************************************************************************/
-/* close a cardlog file. If the file has been opened for exclusive write it is */
-/* assumed as pof data input and the pof loader is noticed about.              */
-/* Otherwise file is handled as log output. In this case the interface usage   */
-/* count is decremented and all buffers are noticed of closing. If this file   */
-/* was the last one to be closed, all buffers are freed.                       */
-/*******************************************************************************/
-static int
-hysdn_log_close(struct inode *ino, struct file *filep)
-{
-	struct log_data *inf;
-	struct procdata *pd;
-	hysdn_card *card;
-	int retval = 0;
-
-	mutex_lock(&hysdn_log_mutex);
-	if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
-		/* write only access -> write debug level written */
-		retval = 0;	/* success */
-	} else {
-		/* read access -> log/debug read, mark one further file as closed */
-
-		inf = *((struct log_data **) filep->private_data);	/* get first log entry */
-		if (inf)
-			pd = (struct procdata *) inf->proc_ctrl;	/* still entries there */
-		else {
-			/* no info available -> search card */
-			card = PDE_DATA(file_inode(filep));
-			pd = card->proclog;	/* pointer to procfs log */
-		}
-		if (pd)
-			pd->if_used--;	/* decrement interface usage count by one */
-
-		while (inf) {
-			inf->usage_cnt--;	/* decrement usage count for buffers */
-			inf = inf->next;
-		}
-
-		if (pd)
-			if (pd->if_used <= 0)	/* delete buffers if last file closed */
-				while (pd->log_head) {
-					inf = pd->log_head;
-					pd->log_head = pd->log_head->next;
-					kfree(inf);
-				}
-	}			/* read access */
-	mutex_unlock(&hysdn_log_mutex);
-
-	return (retval);
-}				/* hysdn_log_close */
-
-/*************************************************/
-/* select/poll routine to be able using select() */
-/*************************************************/
-static __poll_t
-hysdn_log_poll(struct file *file, poll_table *wait)
-{
-	__poll_t mask = 0;
-	hysdn_card *card = PDE_DATA(file_inode(file));
-	struct procdata *pd = card->proclog;
-
-	if ((file->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE)
-		return (mask);	/* no polling for write supported */
-
-	poll_wait(file, &(pd->rd_queue), wait);
-
-	if (*((struct log_data **) file->private_data))
-		mask |= EPOLLIN | EPOLLRDNORM;
-
-	return mask;
-}				/* hysdn_log_poll */
-
-/**************************************************/
-/* table for log filesystem functions defined above. */
-/**************************************************/
-static const struct file_operations log_fops =
-{
-	.owner		= THIS_MODULE,
-	.llseek         = no_llseek,
-	.read           = hysdn_log_read,
-	.write          = hysdn_log_write,
-	.poll           = hysdn_log_poll,
-	.open           = hysdn_log_open,
-	.release        = hysdn_log_close,
-};
-
-
-/***********************************************************************************/
-/* hysdn_proclog_init is called when the module is loaded after creating the cards */
-/* conf files.                                                                     */
-/***********************************************************************************/
-int
-hysdn_proclog_init(hysdn_card *card)
-{
-	struct procdata *pd;
-
-	/* create a cardlog proc entry */
-
-	if ((pd = kzalloc(sizeof(struct procdata), GFP_KERNEL)) != NULL) {
-		sprintf(pd->log_name, "%s%d", PROC_LOG_BASENAME, card->myid);
-		pd->log = proc_create_data(pd->log_name,
-				      S_IFREG | S_IRUGO | S_IWUSR, hysdn_proc_entry,
-				      &log_fops, card);
-
-		init_waitqueue_head(&(pd->rd_queue));
-
-		card->proclog = (void *) pd;	/* remember procfs structure */
-	}
-	return (0);
-}				/* hysdn_proclog_init */
-
-/************************************************************************************/
-/* hysdn_proclog_release is called when the module is unloaded and before the cards */
-/* conf file is released                                                            */
-/* The module counter is assumed to be 0 !                                          */
-/************************************************************************************/
-void
-hysdn_proclog_release(hysdn_card *card)
-{
-	struct procdata *pd;
-
-	if ((pd = (struct procdata *) card->proclog) != NULL) {
-		if (pd->log)
-			remove_proc_entry(pd->log_name, hysdn_proc_entry);
-		kfree(pd);	/* release memory */
-		card->proclog = NULL;
-	}
-}				/* hysdn_proclog_release */
diff --git a/drivers/isdn/hysdn/hysdn_sched.c b/drivers/isdn/hysdn/hysdn_sched.c
deleted file mode 100644
index 31d7c1415543..000000000000
--- a/drivers/isdn/hysdn/hysdn_sched.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/* $Id: hysdn_sched.c,v 1.5.6.4 2001/11/06 21:58:19 kai Exp $
- *
- * Linux driver for HYSDN cards
- * scheduler routines for handling exchange card <-> pc.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-#include "hysdn_defs.h"
-
-/*****************************************************************************/
-/* hysdn_sched_rx is called from the cards handler to announce new data is   */
-/* available from the card. The routine has to handle the data and return    */
-/* with a nonzero code if the data could be worked (or even thrown away), if */
-/* no room to buffer the data is available a zero return tells the card      */
-/* to keep the data until later.                                             */
-/*****************************************************************************/
-int
-hysdn_sched_rx(hysdn_card *card, unsigned char *buf, unsigned short len,
-	       unsigned short chan)
-{
-
-	switch (chan) {
-	case CHAN_NDIS_DATA:
-		if (hynet_enable & (1 << card->myid)) {
-			/* give packet to network handler */
-			hysdn_rx_netpkt(card, buf, len);
-		}
-		break;
-
-	case CHAN_ERRLOG:
-		hysdn_card_errlog(card, (tErrLogEntry *) buf, len);
-		if (card->err_log_state == ERRLOG_STATE_ON)
-			card->err_log_state = ERRLOG_STATE_START;	/* start new fetch */
-		break;
-#ifdef CONFIG_HYSDN_CAPI
-	case CHAN_CAPI:
-/* give packet to CAPI handler */
-		if (hycapi_enable & (1 << card->myid)) {
-			hycapi_rx_capipkt(card, buf, len);
-		}
-		break;
-#endif /* CONFIG_HYSDN_CAPI */
-	default:
-		printk(KERN_INFO "irq message channel %d len %d unhandled \n", chan, len);
-		break;
-
-	}			/* switch rx channel */
-
-	return (1);		/* always handled */
-}				/* hysdn_sched_rx */
-
-/*****************************************************************************/
-/* hysdn_sched_tx is called from the cards handler to announce that there is */
-/* room in the tx-buffer to the card and data may be sent if needed.         */
-/* If the routine wants to send data it must fill buf, len and chan with the */
-/* appropriate data and return a nonzero value. With a zero return no new    */
-/* data to send is assumed. maxlen specifies the buffer size available for   */
-/* sending.                                                                  */
-/*****************************************************************************/
-int
-hysdn_sched_tx(hysdn_card *card, unsigned char *buf,
-	       unsigned short volatile *len, unsigned short volatile *chan,
-	       unsigned short maxlen)
-{
-	struct sk_buff *skb;
-
-	if (card->net_tx_busy) {
-		card->net_tx_busy = 0;	/* reset flag */
-		hysdn_tx_netack(card);	/* acknowledge packet send */
-	}			/* a network packet has completely been transferred */
-	/* first of all async requests are handled */
-	if (card->async_busy) {
-		if (card->async_len <= maxlen) {
-			memcpy(buf, card->async_data, card->async_len);
-			*len = card->async_len;
-			*chan = card->async_channel;
-			card->async_busy = 0;	/* reset request */
-			return (1);
-		}
-		card->async_busy = 0;	/* in case of length error */
-	}			/* async request */
-	if ((card->err_log_state == ERRLOG_STATE_START) &&
-	    (maxlen >= ERRLOG_CMD_REQ_SIZE)) {
-		strcpy(buf, ERRLOG_CMD_REQ);	/* copy the command */
-		*len = ERRLOG_CMD_REQ_SIZE;	/* buffer length */
-		*chan = CHAN_ERRLOG;	/* and channel */
-		card->err_log_state = ERRLOG_STATE_ON;	/* new state is on */
-		return (1);	/* tell that data should be send */
-	}			/* error log start and able to send */
-	if ((card->err_log_state == ERRLOG_STATE_STOP) &&
-	    (maxlen >= ERRLOG_CMD_STOP_SIZE)) {
-		strcpy(buf, ERRLOG_CMD_STOP);	/* copy the command */
-		*len = ERRLOG_CMD_STOP_SIZE;	/* buffer length */
-		*chan = CHAN_ERRLOG;	/* and channel */
-		card->err_log_state = ERRLOG_STATE_OFF;		/* new state is off */
-		return (1);	/* tell that data should be send */
-	}			/* error log start and able to send */
-	/* now handle network interface packets */
-	if ((hynet_enable & (1 << card->myid)) &&
-	    (skb = hysdn_tx_netget(card)) != NULL)
-	{
-		if (skb->len <= maxlen) {
-			/* copy the packet to the buffer */
-			skb_copy_from_linear_data(skb, buf, skb->len);
-			*len = skb->len;
-			*chan = CHAN_NDIS_DATA;
-			card->net_tx_busy = 1;	/* we are busy sending network data */
-			return (1);	/* go and send the data */
-		} else
-			hysdn_tx_netack(card);	/* aknowledge packet -> throw away */
-	}			/* send a network packet if available */
-#ifdef CONFIG_HYSDN_CAPI
-	if (((hycapi_enable & (1 << card->myid))) &&
-	    ((skb = hycapi_tx_capiget(card)) != NULL))
-	{
-		if (skb->len <= maxlen) {
-			skb_copy_from_linear_data(skb, buf, skb->len);
-			*len = skb->len;
-			*chan = CHAN_CAPI;
-			hycapi_tx_capiack(card);
-			return (1);	/* go and send the data */
-		}
-	}
-#endif /* CONFIG_HYSDN_CAPI */
-	return (0);		/* nothing to send */
-}				/* hysdn_sched_tx */
-
-
-/*****************************************************************************/
-/* send one config line to the card and return 0 if successful, otherwise a */
-/* negative error code.                                                      */
-/* The function works with timeouts perhaps not giving the greatest speed    */
-/* sending the line, but this should be meaningless because only some lines  */
-/* are to be sent and this happens very seldom.                              */
-/*****************************************************************************/
-int
-hysdn_tx_cfgline(hysdn_card *card, unsigned char *line, unsigned short chan)
-{
-	int cnt = 50;		/* timeout intervalls */
-	unsigned long flags;
-
-	if (card->debug_flags & LOG_SCHED_ASYN)
-		hysdn_addlog(card, "async tx-cfg chan=%d len=%d", chan, strlen(line) + 1);
-
-	while (card->async_busy) {
-
-		if (card->debug_flags & LOG_SCHED_ASYN)
-			hysdn_addlog(card, "async tx-cfg delayed");
-
-		msleep_interruptible(20);		/* Timeout 20ms */
-		if (!--cnt)
-			return (-ERR_ASYNC_TIME);	/* timed out */
-	}			/* wait for buffer to become free */
-
-	spin_lock_irqsave(&card->hysdn_lock, flags);
-	strcpy(card->async_data, line);
-	card->async_len = strlen(line) + 1;
-	card->async_channel = chan;
-	card->async_busy = 1;	/* request transfer */
-
-	/* now queue the task */
-	schedule_work(&card->irq_queue);
-	spin_unlock_irqrestore(&card->hysdn_lock, flags);
-
-	if (card->debug_flags & LOG_SCHED_ASYN)
-		hysdn_addlog(card, "async tx-cfg data queued");
-
-	cnt++;			/* short delay */
-
-	while (card->async_busy) {
-
-		if (card->debug_flags & LOG_SCHED_ASYN)
-			hysdn_addlog(card, "async tx-cfg waiting for tx-ready");
-
-		msleep_interruptible(20);		/* Timeout 20ms */
-		if (!--cnt)
-			return (-ERR_ASYNC_TIME);	/* timed out */
-	}			/* wait for buffer to become free again */
-
-	if (card->debug_flags & LOG_SCHED_ASYN)
-		hysdn_addlog(card, "async tx-cfg data send");
-
-	return (0);		/* line send correctly */
-}				/* hysdn_tx_cfgline */
diff --git a/drivers/isdn/hysdn/ince1pc.h b/drivers/isdn/hysdn/ince1pc.h
deleted file mode 100644
index cab68361de65..000000000000
--- a/drivers/isdn/hysdn/ince1pc.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Linux driver for HYSDN cards
- * common definitions for both sides of the bus:
- * - conventions both spoolers must know
- * - channel numbers agreed upon
- *
- * Author    M. Steinkopf
- * Copyright 1999 by M. Steinkopf
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef __INCE1PC_H__
-#define __INCE1PC_H__
-
-/*  basic scalar definitions have same meanning,
- *  but their declaration location depends on environment
- */
-
-/*--------------------------------------channel numbers---------------------*/
-#define CHAN_SYSTEM     0x0001      /* system channel (spooler to spooler) */
-#define CHAN_ERRLOG     0x0005      /* error logger */
-#define CHAN_CAPI       0x0064      /* CAPI interface */
-#define CHAN_NDIS_DATA  0x1001      /* NDIS data transfer */
-
-/*--------------------------------------POF ready msg-----------------------*/
-/* NOTE: after booting POF sends system ready message to PC: */
-#define RDY_MAGIC       0x52535953UL    /* 'SYSR' reversed */
-#define RDY_MAGIC_SIZE  4               /* size in bytes */
-
-#define MAX_N_TOK_BYTES 255
-
-#define MIN_RDY_MSG_SIZE    RDY_MAGIC_SIZE
-#define MAX_RDY_MSG_SIZE    (RDY_MAGIC_SIZE + MAX_N_TOK_BYTES)
-
-#define SYSR_TOK_END            0
-#define SYSR_TOK_B_CHAN         1   /* nr. of B-Channels;   DataLen=1; def: 2 */
-#define SYSR_TOK_FAX_CHAN       2   /* nr. of FAX Channels; DataLen=1; def: 0 */
-#define SYSR_TOK_MAC_ADDR       3   /* MAC-Address; DataLen=6; def: auto */
-#define SYSR_TOK_ESC            255 /* undefined data size yet */
-/* default values, if not corrected by token: */
-#define SYSR_TOK_B_CHAN_DEF     2   /* assume 2 B-Channels */
-#define SYSR_TOK_FAX_CHAN_DEF   1   /* assume 1 FAX Channel */
-
-/*  syntax of new SYSR token stream:
- *  channel: CHAN_SYSTEM
- *  msgsize: MIN_RDY_MSG_SIZE <= x <= MAX_RDY_MSG_SIZE
- *           RDY_MAGIC_SIZE   <= x <= (RDY_MAGIC_SIZE+MAX_N_TOK_BYTES)
- *  msg    : 0 1 2 3 {4 5 6 ..}
- *           S Y S R  MAX_N_TOK_BYTES bytes of TokenStream
- *
- *  TokenStream     :=   empty
- *                     | {NonEndTokenChunk} EndToken RotlCRC
- *  NonEndTokenChunk:= NonEndTokenId DataLen [Data]
- *  NonEndTokenId   := 0x01 .. 0xFE                 1 BYTE
- *  DataLen         := 0x00 .. 0xFF                 1 BYTE
- *  Data            := DataLen bytes
- *  EndToken        := 0x00
- *  RotlCRC         := special 1 byte CRC over all NonEndTokenChunk bytes
- *                     s. RotlCRC algorithm
- *
- *  RotlCRC algorithm:
- *      ucSum= 0                        1 unsigned char
- *      for all NonEndTokenChunk bytes:
- *          ROTL(ucSum,1)               rotate left by 1
- *          ucSum += Char;              add current byte with swap around
- *      RotlCRC= ~ucSum;                invert all bits for result
- *
- *  note:
- *  - for 16-bit FIFO add padding 0 byte to achieve even token data bytes!
- */
-
-/*--------------------------------------error logger------------------------*/
-/* note: pof needs final 0 ! */
-#define ERRLOG_CMD_REQ          "ERRLOG ON"
-#define ERRLOG_CMD_REQ_SIZE     10              /* with final 0 byte ! */
-#define ERRLOG_CMD_STOP         "ERRLOG OFF"
-#define ERRLOG_CMD_STOP_SIZE    11              /* with final 0 byte ! */
-
-#define ERRLOG_ENTRY_SIZE       64      /* sizeof(tErrLogEntry) */
-					/* remaining text size = 55 */
-#define ERRLOG_TEXT_SIZE    (ERRLOG_ENTRY_SIZE - 2 * 4 - 1)
-
-typedef struct ErrLogEntry_tag {
-
-	/*00 */ unsigned long ulErrType;
-
-	/*04 */ unsigned long ulErrSubtype;
-
-	/*08 */ unsigned char ucTextSize;
-
-	/*09 */ unsigned char ucText[ERRLOG_TEXT_SIZE];
-	/* ASCIIZ of len ucTextSize-1 */
-
-/*40 */
-} tErrLogEntry;
-
-
-#if defined(__TURBOC__)
-#if sizeof(tErrLogEntry) != ERRLOG_ENTRY_SIZE
-#error size of tErrLogEntry != ERRLOG_ENTRY_SIZE
-#endif				/*  */
-#endif				/*  */
-
-/*--------------------------------------DPRAM boot spooler------------------*/
-/*  this is the struture used between pc and
- *  hyperstone to exchange boot data
- */
-#define DPRAM_SPOOLER_DATA_SIZE 0x20
-typedef struct DpramBootSpooler_tag {
-
-	/*00 */ unsigned char Len;
-
-	/*01 */ volatile unsigned char RdPtr;
-
-	/*02 */ unsigned char WrPtr;
-
-	/*03 */ unsigned char Data[DPRAM_SPOOLER_DATA_SIZE];
-
-/*23 */
-} tDpramBootSpooler;
-
-
-#define DPRAM_SPOOLER_MIN_SIZE  5       /* Len+RdPtr+Wrptr+2*data */
-#define DPRAM_SPOOLER_DEF_SIZE  0x23    /* current default size   */
-
-/*--------------------------------------HYCARD/ERGO DPRAM SoftUart----------*/
-/* at DPRAM offset 0x1C00: */
-#define SIZE_RSV_SOFT_UART  0x1B0   /* 432 bytes reserved for SoftUart */
-
-
-#endif	/* __INCE1PC_H__ */